diff options
author | Quincey Koziol <koziol@hdfgroup.org> | 2014-03-24 17:41:18 (GMT) |
---|---|---|
committer | Quincey Koziol <koziol@hdfgroup.org> | 2014-03-24 17:41:18 (GMT) |
commit | 25147d5567fa4a2e03c4adeb750d5a7928fe22a9 (patch) | |
tree | 408de91ad7153277449aca0885323c75f4c18803 /src/H5FDmpiposix.c | |
parent | f5a2f3d611c7df739264850ccecaf7b8158fb9d9 (diff) | |
download | hdf5-25147d5567fa4a2e03c4adeb750d5a7928fe22a9.zip hdf5-25147d5567fa4a2e03c4adeb750d5a7928fe22a9.tar.gz hdf5-25147d5567fa4a2e03c4adeb750d5a7928fe22a9.tar.bz2 |
[svn-r24878] Description:
Bring r24864 from trunk to 1.8 branch:
Remove all traces of MPI-POSIX VFD and GPFS detection/code.
Remove remaining traces of stream VFD.
Remove testpar/t_posix_compliant test (it's not actually verifying anything).
Clean up H5D__mpio_opt_possible() further.
Moved environment variable that disables MPI collective operations into
MPI-IO VFD (instead of it being in src/H5S.c).
A few other small code cleanups.
Tested on:
Mac OSX/64 10.9.2 (amazon) w/parallel & serial
(daily tested on trunk)
Diffstat (limited to 'src/H5FDmpiposix.c')
-rw-r--r-- | src/H5FDmpiposix.c | 1486 |
1 files changed, 0 insertions, 1486 deletions
diff --git a/src/H5FDmpiposix.c b/src/H5FDmpiposix.c deleted file mode 100644 index f66b244..0000000 --- a/src/H5FDmpiposix.c +++ /dev/null @@ -1,1486 +0,0 @@ -/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * Copyright by The HDF Group. * - * Copyright by the Board of Trustees of the University of Illinois. * - * All rights reserved. * - * * - * This file is part of HDF5. The full HDF5 copyright notice, including * - * terms governing use, modification, and redistribution, is contained in * - * the files COPYING and Copyright.html. COPYING can be found at the root * - * of the source code distribution tree; Copyright.html can be found at the * - * root level of an installed copy of the electronic HDF5 document set and * - * is linked from the top-level documents page. It can also be found at * - * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * - * access to either file, you may request a copy from help@hdfgroup.org. * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ - -/* - * Programmer: Quincey Koziol <koziol@ncsa.uiuc.ed> - * Thursday, July 11, 2002 - * - * Purpose: This is a "combination" MPI-2 and posix I/O driver. - * It uses MPI for coordinating the actions of several processes - * and posix I/O calls to do the actual I/O to the disk. - * - * This driver was derived from the H5FDmpio.c driver and may - * share bugs/quirks/etc. - * - * Limitations: - * There is no "collective" I/O mode with this driver. - * - * This will almost certainly _not_ work correctly for files - * accessed on distributed parallel systems with the file located - * on a non-parallel filesystem. - * - */ - -/* Interface initialization */ -#define H5_INTERFACE_INIT_FUNC H5FD_mpiposix_init_interface - - -#include "H5private.h" /* Generic Functions */ -#include "H5ACprivate.h" /* Metadata cache */ -#include "H5Eprivate.h" /* Error handling */ -#include "H5Fprivate.h" /* File access */ -#include "H5FDprivate.h" /* File drivers */ -#include "H5FDmpi.h" /* MPI-based file drivers */ -#include "H5Iprivate.h" /* IDs */ -#include "H5MMprivate.h" /* Memory management */ -#include "H5Pprivate.h" /* Property lists */ - -/* Features: - * H5_HAVE_GPFS -- issue gpfs_fcntl() calls to hopefully improve - * performance when accessing files on a GPFS - * file system. - * - * REPORT_IO -- if set then report all POSIX file calls to stderr. - * - */ -/* #define REPORT_IO */ - -#ifdef H5_HAVE_GPFS -# include <gpfs_fcntl.h> -#endif - -#ifdef H5_HAVE_PARALLEL - -/* - * The driver identification number, initialized at runtime if H5_HAVE_PARALLEL - * is defined. This allows applications to still have the H5FD_MPIPOSIX - * "constants" in their source code (it also makes this file strictly ANSI - * compliant when H5_HAVE_PARALLEL isn't defined) - */ -static hid_t H5FD_MPIPOSIX_g = 0; - -/* - * The description of a file belonging to this driver. - * The EOF value is only used just after the file is opened in order for the - * library to determine whether the file is empty, truncated, or okay. The - * MPIPOSIX driver doesn't bother to keep it updated since it's an expensive - * operation. - */ -typedef struct H5FD_mpiposix_t { - H5FD_t pub; /* public stuff, must be first */ - int fd; /* the unix file handle */ - MPI_Comm comm; /* communicator */ - int mpi_rank; /* This process's rank */ - int mpi_size; /* Total number of processes */ - haddr_t eof; /* end-of-file marker */ - haddr_t eoa; /* end-of-address marker */ - haddr_t last_eoa; /* Last known end-of-address marker */ - haddr_t pos; /* Current file I/O position */ - H5FD_file_op_t op; /* Last file I/O operation */ - hsize_t naccess; /* Number of (write) accesses to file */ -#ifdef H5_HAVE_GPFS - size_t blksize; /* Block size of file system */ -#endif - hbool_t use_gpfs; /* Use GPFS to write things */ -#ifndef H5_HAVE_WIN32_API - /* On most systems the combination of device and i-node number uniquely - * identify a file. Note that Cygwin, MinGW and other Windows POSIX - * environments have the stat function (which fakes inodes) - * and will use the 'device + inodes' scheme as opposed to the - * Windows code further below. - */ - dev_t device; /* file device number */ -#ifdef H5_VMS - ino_t inode[3]; /* file i-node number */ -#else - ino_t inode; /* file i-node number */ -#endif /* H5_VMS */ -#else - /* Files in windows are uniquely identified by the volume serial - * number and the file index (both low and high parts). - * - * There are caveats where these numbers can change, especially - * on FAT file systems. On NTFS, however, a file should keep - * those numbers the same until renamed or deleted (though you - * can use ReplaceFile() on NTFS to keep the numbers the same - * while renaming). - * - * See the MSDN "BY_HANDLE_FILE_INFORMATION Structure" entry for - * more information. - * - * http://msdn.microsoft.com/en-us/library/aa363788(v=VS.85).aspx - */ - DWORD nFileIndexLow; - DWORD nFileIndexHigh; - DWORD dwVolumeSerialNumber; - - HANDLE hFile; /* Native windows file handle */ -#endif /* H5_HAVE_WIN32_API */ -} H5FD_mpiposix_t; - -/* - * These macros check for overflow of various quantities. These macros - * assume that HDoff_t is signed and haddr_t and size_t are unsigned. - * - * ADDR_OVERFLOW: Checks whether a file address of type `haddr_t' - * is too large to be represented by the second argument - * of the file seek function. - * - * SIZE_OVERFLOW: Checks whether a buffer size of type `hsize_t' is too - * large to be represented by the `size_t' type. - * - * REGION_OVERFLOW: Checks whether an address and size pair describe data - * which can be addressed entirely by the second - * argument of the file seek function. - */ -#define MAXADDR (((haddr_t)1 << (8*sizeof(HDoff_t) - 1)) - 1) -#define ADDR_OVERFLOW(A) (HADDR_UNDEF == (A) || ((A) & ~(haddr_t)MAXADDR)) -#define SIZE_OVERFLOW(Z) ((Z) & ~(hsize_t)MAXADDR) -#define REGION_OVERFLOW(A,Z) (ADDR_OVERFLOW(A) || SIZE_OVERFLOW(Z) || \ - HADDR_UNDEF == (A) + (Z) || \ - (HDoff_t)((A) + (Z)) < (HDoff_t)(A)) - -/* Callbacks */ -static void *H5FD_mpiposix_fapl_get(H5FD_t *_file); -static void *H5FD_mpiposix_fapl_copy(const void *_old_fa); -static herr_t H5FD_mpiposix_fapl_free(void *_fa); -static H5FD_t *H5FD_mpiposix_open(const char *name, unsigned flags, hid_t fapl_id, - haddr_t maxaddr); -static herr_t H5FD_mpiposix_close(H5FD_t *_file); -static int H5FD_mpiposix_cmp(const H5FD_t *_f1, const H5FD_t *_f2); -static herr_t H5FD_mpiposix_query(const H5FD_t *_f1, unsigned long *flags); -static haddr_t H5FD_mpiposix_get_eoa(const H5FD_t *_file, H5FD_mem_t UNUSED type); -static herr_t H5FD_mpiposix_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr); -static haddr_t H5FD_mpiposix_get_eof(const H5FD_t *_file); -static herr_t H5FD_mpiposix_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle); -static herr_t H5FD_mpiposix_read(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr, - size_t size, void *buf); -static herr_t H5FD_mpiposix_write(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr, - size_t size, const void *buf); -static herr_t H5FD_mpiposix_truncate(H5FD_t *_file, hid_t dxpl_id, hbool_t closing); -static int H5FD_mpiposix_mpi_rank(const H5FD_t *_file); -static int H5FD_mpiposix_mpi_size(const H5FD_t *_file); -static MPI_Comm H5FD_mpiposix_communicator(const H5FD_t *_file); - -/* MPIPOSIX-specific file access properties */ -typedef struct H5FD_mpiposix_fapl_t { - hbool_t use_gpfs; /* use GPFS hints */ - MPI_Comm comm; /* communicator */ -} H5FD_mpiposix_fapl_t; - -/* The MPIPOSIX file driver information */ -static const H5FD_class_mpi_t H5FD_mpiposix_g = { - { /* Start of superclass information */ - "mpiposix", /* name */ - MAXADDR, /* maxaddr */ - H5F_CLOSE_SEMI, /* fc_degree */ - NULL, /* sb_size */ - NULL, /* sb_encode */ - NULL, /* sb_decode */ - sizeof(H5FD_mpiposix_fapl_t), /* fapl_size */ - H5FD_mpiposix_fapl_get, /* fapl_get */ - H5FD_mpiposix_fapl_copy, /* fapl_copy */ - H5FD_mpiposix_fapl_free, /* fapl_free */ - 0, /* dxpl_size */ - NULL, /* dxpl_copy */ - NULL, /* dxpl_free */ - H5FD_mpiposix_open, /* open */ - H5FD_mpiposix_close, /* close */ - H5FD_mpiposix_cmp, /* cmp */ - H5FD_mpiposix_query, /* query */ - NULL, /* get_type_map */ - NULL, /* alloc */ - NULL, /* free */ - H5FD_mpiposix_get_eoa, /* get_eoa */ - H5FD_mpiposix_set_eoa, /* set_eoa */ - H5FD_mpiposix_get_eof, /* get_eof */ - H5FD_mpiposix_get_handle, /* get_handle */ - H5FD_mpiposix_read, /* read */ - H5FD_mpiposix_write, /* write */ - NULL, /* flush */ - H5FD_mpiposix_truncate, /* truncate */ - NULL, /* lock */ - NULL, /* unlock */ - H5FD_FLMAP_DICHOTOMY /* fl_map */ - }, /* End of superclass information */ - H5FD_mpiposix_mpi_rank, /* get_rank */ - H5FD_mpiposix_mpi_size, /* get_size */ - H5FD_mpiposix_communicator /* get_comm */ -}; - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_init_interface - * - * Purpose: Initializes any interface-specific data or routines. - * - * Return: Success: The driver ID for the mpiposix driver. - * Failure: Negative. - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_init_interface(void) -{ - FUNC_ENTER_NOAPI_NOINIT_NOERR - - FUNC_LEAVE_NOAPI(H5FD_mpiposix_init()) -} /* H5FD_mpiposix_init_interface() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_init - * - * Purpose: Initialize this driver by registering the driver with the - * library. - * - * Return: Success: The driver ID for the mpiposix driver. - * Failure: Negative. - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -hid_t -H5FD_mpiposix_init(void) -{ - hid_t ret_value = H5FD_MPIPOSIX_g; /* Return value */ - - FUNC_ENTER_NOAPI(FAIL) - - if(H5I_VFL != H5I_get_type(H5FD_MPIPOSIX_g)) - H5FD_MPIPOSIX_g = H5FD_register((const H5FD_class_t *)&H5FD_mpiposix_g, sizeof(H5FD_class_mpi_t), FALSE); - - /* Set return value */ - ret_value = H5FD_MPIPOSIX_g; - -done: - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_init() */ - - -/*--------------------------------------------------------------------------- - * Function: H5FD_mpiposix_term - * - * Purpose: Shut down the VFD - * - * Returns: SUCCEED (can't fail) - * - * Programmer: Quincey Koziol - * Friday, Jan 30, 2004 - * - * Modification: - * - *--------------------------------------------------------------------------- - */ -void -H5FD_mpiposix_term(void) -{ - FUNC_ENTER_NOAPI_NOINIT_NOERR - - /* Reset VFL ID */ - H5FD_MPIPOSIX_g = 0; - - FUNC_LEAVE_NOAPI_VOID -} /* end H5FD_mpiposix_term() */ - - -/*------------------------------------------------------------------------- - * Function: H5Pset_fapl_mpiposix - * - * Purpose: Store the user supplied MPI communicator COMM in - * the file access property list FAPL_ID which can then be used - * to create and/or open the file. This function is available - * only in the parallel HDF5 library and is not collective. - * - * comm is the MPI communicator to be used for file open as - * defined in MPI_FILE_OPEN of MPI-2. This function makes a - * duplicate of comm. Any modification to comm after this function - * call returns has no effect on the access property list. - * - * If fapl_id has previously set comm value, it will be replaced - * and the old communicator is freed. - * - * Return: SUCCEED/FAIL - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -herr_t -H5Pset_fapl_mpiposix(hid_t fapl_id, MPI_Comm comm, hbool_t use_gpfs) -{ - H5FD_mpiposix_fapl_t fa; - H5P_genplist_t *plist; /* Property list pointer */ - herr_t ret_value; - - FUNC_ENTER_API(FAIL) - H5TRACE3("e", "iMcb", fapl_id, comm, use_gpfs); - - /* Check arguments */ - if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS))) - HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access list") - if (MPI_COMM_NULL == comm) - HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a valid communicator") - - /* Initialize driver specific properties */ - fa.comm = comm; - fa.use_gpfs = use_gpfs; - - /* duplication is done during driver setting. */ - ret_value = H5P_set_driver(plist, H5FD_MPIPOSIX, &fa); - -done: - FUNC_LEAVE_API(ret_value) -} /* end H5Pset_fapl_mpiposix() */ - - -/*------------------------------------------------------------------------- - * Function: H5Pget_fapl_mpiposix - * - * Purpose: If the file access property list is set to the H5FD_MPIPOSIX - * driver then this function returns a duplicate of the MPI - * communicator through the comm pointer. It is the responsibility - * of the application to free the returned communicator. - * - * Return: Success: Non-negative with the communicator and - * information returned through the COMM - * argument if non-null. Since it is a duplicate - * of the stored object, future modifications to - * the access property list do not affect it and - * it is the responsibility of the application to - * free it. - * Failure: Negative - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -herr_t -H5Pget_fapl_mpiposix(hid_t fapl_id, MPI_Comm *comm/*out*/, hbool_t *use_gpfs/*out*/) -{ - H5FD_mpiposix_fapl_t *fa; - H5P_genplist_t *plist; /* Property list pointer */ - int mpi_code; /* mpi return code */ - herr_t ret_value = SUCCEED; /* Return value */ - - FUNC_ENTER_API(FAIL) - H5TRACE3("e", "ixx", fapl_id, comm, use_gpfs); - - if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS))) - HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access list") - if (H5FD_MPIPOSIX != H5P_get_driver(plist)) - HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver") - if (NULL == (fa = H5P_get_driver_info(plist))) - HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info") - - /* Get MPI Communicator */ - if (comm){ - if (MPI_SUCCESS != (mpi_code = MPI_Comm_dup(fa->comm, comm))) - HMPI_GOTO_ERROR(FAIL, "MPI_Comm_dup failed", mpi_code) - } - - if (use_gpfs) - *use_gpfs = fa->use_gpfs; - -done: - FUNC_LEAVE_API(ret_value) -} /* end H5Pget_fapl_mpiposix() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_fapl_get - * - * Purpose: Returns a file access property list which could be used to - * create another file the same as this one. - * - * Return: Success: Ptr to new file access property list with all - * fields copied from the file pointer. - * Failure: NULL - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static void * -H5FD_mpiposix_fapl_get(H5FD_t *_file) -{ - H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; - H5FD_mpiposix_fapl_t *fa = NULL; - int mpi_code; /* MPI return code */ - void *ret_value; /* Return value */ - - FUNC_ENTER_NOAPI_NOINIT - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - if (NULL == (fa = H5MM_calloc(sizeof(H5FD_mpiposix_fapl_t)))) - HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") - - /* Duplicate the communicator. */ - if (MPI_SUCCESS != (mpi_code=MPI_Comm_dup(file->comm, &fa->comm))) - HMPI_GOTO_ERROR(NULL, "MPI_Comm_dup failed", mpi_code) - - fa->use_gpfs = file->use_gpfs; - - /* Set return value */ - ret_value=fa; - -done: - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_fapl_get() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_fapl_copy - * - * Purpose: Copies the mpiposix-specific file access properties. - * - * Return: Success: Ptr to a new property list - * Failure: NULL - * - * Programmer: Albert Cheng - * Apr 24, 2003 - * - *------------------------------------------------------------------------- - */ -static void * -H5FD_mpiposix_fapl_copy(const void *_old_fa) -{ - void *ret_value = NULL; - const H5FD_mpiposix_fapl_t *old_fa = (const H5FD_mpiposix_fapl_t*)_old_fa; - H5FD_mpiposix_fapl_t *new_fa = NULL; - int mpi_code; /* MPI return code */ - - FUNC_ENTER_NOAPI_NOINIT - - if (NULL == (new_fa = H5MM_malloc(sizeof(H5FD_mpiposix_fapl_t)))) - HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") - - /* Copy the general information */ - HDmemcpy(new_fa, old_fa, sizeof(H5FD_mpiposix_fapl_t)); - - /* Duplicate communicator. */ - if (MPI_SUCCESS != (mpi_code = MPI_Comm_dup(old_fa->comm, &new_fa->comm))) - HMPI_GOTO_ERROR(NULL, "MPI_Comm_dup failed", mpi_code) - - new_fa->use_gpfs = old_fa->use_gpfs; - ret_value = new_fa; - -done: - if (NULL == ret_value){ - /* cleanup */ - if (new_fa) - H5MM_xfree(new_fa); - } - - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_fapl_copy() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_fapl_free - * - * Purpose: Frees the mpiposix-specific file access properties. - * - * Return: SUCCEED (can't fail) - * - * Programmer: Albert Cheng - * Apr 24, 2003 - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_fapl_free(void *_fa) -{ - H5FD_mpiposix_fapl_t *fa = (H5FD_mpiposix_fapl_t*)_fa; - - FUNC_ENTER_NOAPI_NOINIT_NOERR - - HDassert(fa); - - /* Free the internal communicator */ - HDassert(MPI_COMM_NULL != fa->comm); - MPI_Comm_free(&fa->comm); - H5MM_xfree(fa); - - FUNC_LEAVE_NOAPI(SUCCEED) -} /* end H5FD_mpiposix_fapl_free() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_open - * - * Purpose: Opens a file with name NAME. The FLAGS are a bit field with - * purpose similar to the second argument of open(2) and which - * are defined in H5Fpublic.h. The file access property list - * FAPL_ID contains the properties driver properties and MAXADDR - * is the largest address which this file will be expected to - * access. This is collective. - * - * Return: Success: A new file pointer. - * Failure: NULL - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static H5FD_t * -H5FD_mpiposix_open(const char *name, unsigned flags, hid_t fapl_id, - haddr_t maxaddr) -{ - H5FD_mpiposix_t *file = NULL; /* New MPIPOSIX file struct */ - int o_flags; /* Flags for file open call */ - int fd = -1; /* File handle for file opened */ - int mpi_rank; /* MPI rank of this process */ - int mpi_size; /* Total number of MPI processes */ - int mpi_code; /* mpi return code */ - const H5FD_mpiposix_fapl_t *fa = NULL; /* MPIPOSIX file access property list information */ - H5FD_mpiposix_fapl_t _fa; /* Private copy of default file access property list information */ - H5P_genplist_t *plist; /* Property list pointer */ - h5_stat_t sb; /* Portable 'stat' struct */ -#ifdef H5_HAVE_WIN32_API - struct _BY_HANDLE_FILE_INFORMATION fileinfo; -#endif - H5FD_t *ret_value = NULL; /* Return value */ - MPI_Comm comm_dup = MPI_COMM_NULL; - - FUNC_ENTER_NOAPI_NOINIT - - /* Check arguments */ - if (!name || !*name) - HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "invalid file name") - if (0 == maxaddr || HADDR_UNDEF == maxaddr) - HGOTO_ERROR(H5E_ARGS, H5E_BADRANGE, NULL, "bogus maxaddr") - if (ADDR_OVERFLOW(maxaddr)) - HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, NULL, "bogus maxaddr") - - /* Obtain a pointer to mpiposix-specific file access properties */ - if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS))) - HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list") - if (H5P_FILE_ACCESS_DEFAULT == fapl_id || H5FD_MPIPOSIX != H5P_get_driver(plist)) { - _fa.comm = MPI_COMM_SELF; /*default*/ - _fa.use_gpfs = FALSE; - fa = &_fa; - } /* end if */ - else { - if(NULL == (fa = (const H5FD_mpiposix_fapl_t *)H5P_get_driver_info(plist))) - HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, NULL, "bad VFL driver info") - } /* end else */ - - /* Duplicate the communicator for use by this file. */ - if (MPI_SUCCESS != (mpi_code = MPI_Comm_dup(fa->comm, &comm_dup))) - HMPI_GOTO_ERROR(NULL, "MPI_Comm_dup failed", mpi_code) - - /* Get the MPI rank of this process and the total number of processes */ - if (MPI_SUCCESS != (mpi_code = MPI_Comm_rank (comm_dup, &mpi_rank))) - HMPI_GOTO_ERROR(NULL, "MPI_Comm_rank failed", mpi_code) - if (MPI_SUCCESS != (mpi_code = MPI_Comm_size (comm_dup, &mpi_size))) - HMPI_GOTO_ERROR(NULL, "MPI_Comm_size failed", mpi_code) - - /* Build the open flags */ - o_flags = (H5F_ACC_RDWR & flags) ? O_RDWR : O_RDONLY; - - /* Only set the creation flag(s) for process 0 */ - if(0 == mpi_rank) { - if (H5F_ACC_TRUNC & flags) - o_flags |= O_TRUNC; - if (H5F_ACC_CREAT & flags) - o_flags |= O_CREAT; - if (H5F_ACC_EXCL & flags) - o_flags |= O_EXCL; - } /* end if */ - - /* Process 0 opens (or creates) the file while the rest of the - * processes wait. Then process 0 signals the other processes and they - * open (never create) the file and all processes proceed. - */ - /* Process 0 opens (or creates) file and broadcasts result to other processes */ - if(0 == mpi_rank) { - /* Open the file */ - fd = HDopen(name, o_flags, 0666); - } /* end if */ - - /* Broadcast the results of the open() from process 0 - * - * This is necessary because of the "tentative open" code in H5F_open() - * where the file is attempted to be opened with different flags from the - * user's, in order to check for the file's existence, etc. Here, process 0 - * gets different flags from the other processes (since it is in charge of - * creating the file, if necessary) and can fail in situations where the - * other process's file opens would succeed, so allow the other processes - * to check for that situation and bail out now also. - QAK - */ - if (MPI_SUCCESS != (mpi_code= MPI_Bcast(&fd, sizeof(int), MPI_BYTE, 0, comm_dup))) - HMPI_GOTO_ERROR(NULL, "MPI_Bcast failed", mpi_code) - - /* If the file open on process 0 failed, bail out on all processes now */ - if(fd < 0) - HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file") - - /* Other processes (non 0) wait for broadcast result from process 0 and then open file */ - if(mpi_rank != 0) { - /* Open the file */ - if ((fd = HDopen(name, o_flags, 0666)) < 0) - HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file") - } /* end if */ - - /* Process 0 fstat()s the file and broadcasts the results to the other processes */ - if(0 == mpi_rank) { - /* Get the stat information */ - if (HDfstat(fd, &sb) < 0) - HGOTO_ERROR(H5E_FILE, H5E_BADFILE, NULL, "unable to fstat file") - } /* end if */ - - /* Broadcast the results of the fstat() from process 0 */ - if (MPI_SUCCESS != (mpi_code = MPI_Bcast(&sb, sizeof(h5_stat_t), MPI_BYTE, 0, comm_dup))) - HMPI_GOTO_ERROR(NULL, "MPI_Bcast failed", mpi_code) - -#ifdef H5_HAVE_GPFS - if (fa->use_gpfs) { - /* - * Free all byte range tokens. This is a good thing to do if raw data - * is aligned on 256kB boundaries (a GPFS page is 256kB). Care should - * be taken that there aren't too many sub-page writes, or the mmfsd - * may become overwhelmed. This should probably eventually be passed - * down here as a property. The gpfs_fcntl() will most likely fail if - * 'fd' isn't on a GPFS file system. */ - struct { - gpfsFcntlHeader_t hdr; - gpfsFreeRange_t fr; - } hint; - HDmemset(&hint, 0, sizeof hint); - hint.hdr.totalLength = sizeof hint; - hint.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION; - hint.fr.structLen = sizeof hint.fr; - hint.fr.structType = GPFS_FREE_RANGE; - hint.fr.start = 0; - hint.fr.length = 0; - - if (gpfs_fcntl(fd, &hint) < 0) - HGOTO_ERROR(H5E_FILE, H5E_FCNTL, NULL, "failed to send hints to GPFS") - } -#endif /* H5_HAVE_GPFS */ - - /* Build the file struct and initialize it */ - if (NULL == (file=H5MM_calloc(sizeof(H5FD_mpiposix_t)))) - HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") - -#ifdef REPORT_IO - HDfprintf(stderr, "open: rank=%d name=%s file=0x%08lx\n", mpi_rank, name, (unsigned long)file); -#endif - - /* Set the general file information */ - file->fd = fd; - file->eof = sb.st_size; - - /* for H5_HAVE_WIN32_API support. H5_HAVE_WIN32_API 'stat' does not have - * st_blksize and st_blksize is only used for the H5_HAVE_GPFS case. - */ -#ifdef H5_HAVE_GPFS - file->blksize = sb.st_blksize; -#endif - - /* Set this field in the H5FD_mpiposix_t struct for later use */ - file->use_gpfs = fa->use_gpfs; - - /* Set the MPI information */ - file->comm = comm_dup; - file->mpi_rank = mpi_rank; - file->mpi_size = mpi_size; - - /* Reset the last file I/O operation */ - file->pos = HADDR_UNDEF; - file->op = OP_UNKNOWN; - - /* Set the information for the file's device and inode */ -#ifdef H5_HAVE_WIN32_API - file->hFile = (HANDLE)_get_osfhandle(fd); - if(INVALID_HANDLE_VALUE == file->hFile) - HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get Windows file handle") - - if(!GetFileInformationByHandle((HANDLE)file->hFile, &fileinfo)) - HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get Windows file information") - - file->nFileIndexHigh = fileinfo.nFileIndexHigh; - file->nFileIndexLow = fileinfo.nFileIndexLow; - file->dwVolumeSerialNumber = fileinfo.dwVolumeSerialNumber; -#else /* H5_HAVE_WIN32_API */ - file->device = sb.st_dev; -#ifdef H5_VMS - file->inode[0] = sb.st_ino[0]; - file->inode[1] = sb.st_ino[1]; - file->inode[2] = sb.st_ino[2]; -#else /* H5_VMS */ - file->inode = sb.st_ino; -#endif /* H5_VMS */ -#endif /* H5_HAVE_WIN32_API */ - - /* Indicate success */ - ret_value = (H5FD_t *)file; - -done: - /* Error cleanup */ - if(NULL == ret_value) { - /* Close the file if it was left open */ - if(fd != -1) - HDclose(fd); - if (MPI_COMM_NULL != comm_dup) - MPI_Comm_free(&comm_dup); - } /* end if */ - - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_open() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_close - * - * Purpose: Closes a file. - * - * Return: SUCCEED/FAIL - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_close(H5FD_t *_file) -{ - H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; - herr_t ret_value = SUCCEED; /* Return value */ - - FUNC_ENTER_NOAPI_NOINIT - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - /* Close the unix file */ - if(HDclose(file->fd) < 0) - HGOTO_ERROR(H5E_IO, H5E_CANTCLOSEFILE, FAIL, "unable to close file") - - /* make sure all processes have closed the file before returning. */ - MPI_Barrier(file->comm); - /* Clean up other stuff */ - MPI_Comm_free(&file->comm); - H5MM_xfree(file); - -done: - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_close() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_cmp - * - * Purpose: Compares two files belonging to this driver using an - * arbitrary (but consistent) ordering. - * - * Return: Success: A value like strcmp() - * Failure: never fails (arguments were checked by the caller). - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static int -H5FD_mpiposix_cmp(const H5FD_t *_f1, const H5FD_t *_f2) -{ - const H5FD_mpiposix_t *f1 = (const H5FD_mpiposix_t*)_f1; - const H5FD_mpiposix_t *f2 = (const H5FD_mpiposix_t*)_f2; - int ret_value = 0; - - FUNC_ENTER_NOAPI_NOINIT_NOERR - -#ifdef H5_HAVE_WIN32_API - if(f1->dwVolumeSerialNumber < f2->dwVolumeSerialNumber) HGOTO_DONE(-1) - if(f1->dwVolumeSerialNumber > f2->dwVolumeSerialNumber) HGOTO_DONE(1) - - if(f1->nFileIndexHigh < f2->nFileIndexHigh) HGOTO_DONE(-1) - if(f1->nFileIndexHigh > f2->nFileIndexHigh) HGOTO_DONE(1) - - if(f1->nFileIndexLow < f2->nFileIndexLow) HGOTO_DONE(-1) - if(f1->nFileIndexLow > f2->nFileIndexLow) HGOTO_DONE(1) -#else /* H5_HAVE_WIN32_API */ -#ifdef H5_DEV_T_IS_SCALAR - if(f1->device < f2->device) HGOTO_DONE(-1) - if(f1->device > f2->device) HGOTO_DONE(1) -#else /* H5_DEV_T_IS_SCALAR */ - /* If dev_t isn't a scalar value on this system, just use memcmp to - * determine if the values are the same or not. The actual return value - * shouldn't really matter... - */ - if(HDmemcmp(&(f1->device),&(f2->device),sizeof(dev_t)) < 0) HGOTO_DONE(-1) - if(HDmemcmp(&(f1->device),&(f2->device),sizeof(dev_t)) > 0) HGOTO_DONE(1) -#endif /* H5_DEV_T_IS_SCALAR */ -#ifdef H5_VMS - if(HDmemcmp(&(f1->inode), &(f2->inode), 3 * sizeof(ino_t)) < 0) HGOTO_DONE(-1) - if(HDmemcmp(&(f1->inode), &(f2->inode), 3 * sizeof(ino_t)) > 0) HGOTO_DONE(1) -#else /* H5_VMS */ - if(f1->inode < f2->inode) HGOTO_DONE(-1) - if(f1->inode > f2->inode) HGOTO_DONE(1) -#endif /* H5_VMS */ -#endif /* H5_HAVE_WIN32_API */ - -done: - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_cmp() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_query - * - * Purpose: Set the flags that this VFL driver is capable of supporting. - * (listed in H5FDpublic.h) - * - * Return: SUCCEED (can't fail) - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_query(const H5FD_t UNUSED *_file, unsigned long *flags /* out */) -{ - FUNC_ENTER_NOAPI_NOINIT_NOERR - - /* Set the VFL feature flags that this driver supports */ - if(flags) { - *flags=0; - *flags |= H5FD_FEAT_AGGREGATE_METADATA; /* OK to aggregate metadata allocations */ - *flags |= H5FD_FEAT_AGGREGATE_SMALLDATA; /* OK to aggregate "small" raw data allocations */ - } /* end if */ - - FUNC_LEAVE_NOAPI(SUCCEED) -} /* end H5FD_mpiposix_query() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_get_eoa - * - * Purpose: Gets the end-of-address marker for the file. The EOA marker - * is the first address past the last byte allocated in the - * format address space. - * - * Return: Success: The end-of-address marker. - * Failure: HADDR_UNDEF - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static haddr_t -H5FD_mpiposix_get_eoa(const H5FD_t *_file, H5FD_mem_t UNUSED type) -{ - const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; - - FUNC_ENTER_NOAPI_NOINIT_NOERR - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - FUNC_LEAVE_NOAPI(file->eoa) -} /* end H5FD_mpiposix_get_eoa() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_set_eoa - * - * Purpose: Set the end-of-address marker for the file. This function is - * called shortly after an existing HDF5 file is opened in order - * to tell the driver where the end of the HDF5 data is located. - * - * Return: SUCCEED (can't fail) - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_set_eoa(H5FD_t *_file, H5FD_mem_t UNUSED type, haddr_t addr) -{ - H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; - - FUNC_ENTER_NOAPI_NOINIT_NOERR - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - file->eoa = addr; - - FUNC_LEAVE_NOAPI(SUCCEED) -} /* end H5FD_mpi_posix_set_eoa() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_get_eof - * - * Purpose: Gets the end-of-file marker for the file. The EOF marker - * is the real size of the file. - * - * The MPIPOSIX driver doesn't bother keeping this field updated - * since that's a relatively expensive operation. Fortunately - * the library only needs the EOF just after the file is opened - * in order to determine whether the file is empty, truncated, - * or okay. - * - * Return: Success: The end-of-address marker. - * Failure: HADDR_UNDEF - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static haddr_t -H5FD_mpiposix_get_eof(const H5FD_t *_file) -{ - const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; - - FUNC_ENTER_NOAPI_NOINIT_NOERR - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - FUNC_LEAVE_NOAPI(MAX(file->eof, file->eoa)) -} /* end H5FD_mpiposix_get_eof() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_get_handle - * - * Purpose: Returns the file handle of MPI-POSIX file driver. - * - * Returns: SUCCEED/FAIL - * - * Programmer: Raymond Lu - * Sept. 16, 2002 - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_get_handle(H5FD_t *_file, hid_t UNUSED fapl, void** file_handle) -{ - H5FD_mpiposix_t *file = (H5FD_mpiposix_t *)_file; - herr_t ret_value = SUCCEED; - - FUNC_ENTER_NOAPI_NOINIT - - if(!file_handle) - HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file handle not valid") - - *file_handle = &(file->fd); - -done: - FUNC_LEAVE_NOAPI(ret_value) -} - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_read - * - * Purpose: Reads SIZE bytes of data from FILE beginning at address ADDR - * into buffer BUF according to data transfer properties in - * DXPL_ID using potentially complex file and buffer types to - * effect the transfer. - * - * Reading past the end of the file returns zeros instead of - * failing. - * - * Return: Success: Non-negative. Result is stored in caller-supplied - * buffer BUF. - * Failure: Negative, Contents of buffer BUF are undefined. - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, - haddr_t addr, size_t size, void *buf/*out*/) -{ - H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; - ssize_t nbytes; /* Number of bytes read each I/O call */ - herr_t ret_value = SUCCEED; - - FUNC_ENTER_NOAPI_NOINIT - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - HDassert(buf); - - /* Check for overflow conditions */ - if (HADDR_UNDEF == addr) - HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined") - if (REGION_OVERFLOW(addr, size)) - HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") - if((addr + size) > file->eoa) - HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") - -#ifdef REPORT_IO - { - int commrank; - MPI_Comm_rank(MPI_COMM_WORLD, &commrank); - HDfprintf(stderr, "read: rank=%d file=0x%08lx type=%d, addr=%a size=%Zu\n", - commrank, (unsigned long)file, (int)type, addr, size); - } -#endif - - /* Seek to the correct location */ - if(addr != file->pos || OP_READ != file->op) { - if(HDlseek(file->fd, (HDoff_t)addr, SEEK_SET) < 0) - HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") - } /* end if */ - - /* Read data, being careful of interrupted system calls, partial results, - * and the end of the file. - */ - while(size > 0) { - - h5_posix_io_t bytes_in = 0; /* # of bytes to read */ - h5_posix_io_ret_t bytes_read = -1; /* # of bytes actually read */ - - /* Trying to read more bytes than the return type can handle is - * undefined behavior in POSIX. - */ - if(size > H5_POSIX_MAX_IO_BYTES) - bytes_in = H5_POSIX_MAX_IO_BYTES; - else - bytes_in = (h5_posix_io_t)size; - - do { - bytes_read = HDread(file->fd, buf, bytes_in); - } while(-1 == bytes_read && EINTR == errno); - - if(-1 == bytes_read) { /* error */ - int myerrno = errno; - time_t mytime = HDtime(NULL); - HDoff_t myoffset = HDlseek(file->fd, (HDoff_t)0, SEEK_CUR); - - HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed: time = %s, file descriptor = %d, errno = %d, error message = '%s', buf = %p, total read size = %llu, bytes this sub-read = %llu, bytes actually read = %llu, offset = %llu", HDctime(&mytime), file->fd, myerrno, HDstrerror(myerrno), buf, (unsigned long long)size, (unsigned long long)bytes_in, (unsigned long long)bytes_read, (unsigned long long)myoffset); - } /* end if */ - - if(0 == bytes_read) { - /* end of file but not end of format address space */ - HDmemset(buf, 0, size); - break; - } /* end if */ - - HDassert(bytes_read >= 0); - HDassert((size_t)bytes_read <= size); - - size -= (size_t)bytes_read; - addr += (haddr_t)bytes_read; - buf = (char *)buf + bytes_read; - } /* end while */ - - /* Update current position */ - file->pos = addr; - file->op = OP_READ; - -done: - /* Check for error */ - if(ret_value < 0) { - /* Reset last file I/O information */ - file->pos = HADDR_UNDEF; - file->op = OP_UNKNOWN; - } /* end if */ - - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_read() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_write - * - * Purpose: Writes SIZE bytes of data to FILE beginning at address ADDR - * from buffer BUF according to data transfer properties in - * DXPL_ID using potentially complex file and buffer types to - * effect the transfer. - * - * Return: SUCCEED/FAIL - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_write(H5FD_t *_file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, - size_t size, const void *buf) -{ - H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; -#if 0 /* JRM */ - int mpi_code; /* MPI return code */ -#endif /* JRM */ - ssize_t nbytes; /* Number of bytes written each I/O call */ - H5P_genplist_t *plist; /* Property list pointer */ - herr_t ret_value = SUCCEED; /* Return value */ - - FUNC_ENTER_NOAPI_NOINIT - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - HDassert(H5I_GENPROP_LST == H5I_get_type(dxpl_id)); - HDassert(TRUE == H5P_isa_class(dxpl_id,H5P_DATASET_XFER)); - HDassert(buf); - - /* Check for overflow conditions */ - if (HADDR_UNDEF == addr) - HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined") - if (REGION_OVERFLOW(addr, size)) - HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") - if ((addr + size) > file->eoa) - HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") - - /* Obtain the data transfer properties */ - if(NULL == (plist = H5I_object(dxpl_id))) - HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list") - - /* Metadata specific actions */ - /* All metadata is now written from process 0 -- thus this function - * needs to be re-written to reflect this. For now I have simply - * commented out the code that attempts to synchronize metadata - * writes between processes, but we should really just flag an error - * whenever any process other than process 0 attempts to write - * metadata. - * -- JRM 9/1/05 - */ - if(type != H5FD_MEM_DRAW) { - unsigned block_before_meta_write = 0; /* Whether to block before a metadata write */ - - /* Check if we need to synchronize all processes before attempting - * metadata write (Prevents race condition where the process writing - * the metadata goes ahead and writes the metadata to the file before - * all the processes have read the data, "transmitting" data from the - * "future" to the reading process. -QAK ) - * - * The only time we don't want to block before a metadata write is when - * we are flushing out a bunch of metadata. Then, we block before the - * first write and don't block for further writes in the sequence. - */ - if(H5P_exist_plist(plist,H5AC_BLOCK_BEFORE_META_WRITE_NAME) > 0) - if(H5P_get(plist,H5AC_BLOCK_BEFORE_META_WRITE_NAME,&block_before_meta_write) < 0) - HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get H5AC property") - -#if 0 /* JRM */ - if(block_before_meta_write) - if (MPI_SUCCESS != (mpi_code = MPI_Barrier(file->comm))) - HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code) -#endif /* JRM */ - -#if 0 /* JRM -- 3/23/10 */ /* this is no longer always the case */ - /* Only one process will do the actual write if all procs in comm write same metadata */ - if (file->mpi_rank != H5_PAR_META_WRITE) - HGOTO_DONE(SUCCEED) /* skip the actual write */ -#endif /* JRM */ - } /* end if */ - -#ifdef REPORT_IO - { - int commrank; - MPI_Comm_rank(MPI_COMM_WORLD, &commrank); - HDfprintf(stderr, "write: rank=%d file=0x%08lx type=%d, addr=%a size=%Zu %s\n", - commrank, (unsigned long)file, (int)type, addr, size, - 0 == file->naccess ? "(FIRST ACCESS)" : ""); - } -#endif - - if (0 == file->naccess++) { - /* First write access to this file */ -#ifdef H5_HAVE_GPFS - if (file->use_gpfs) { - struct { - gpfsFcntlHeader_t hdr; - gpfsMultipleAccessRange_t mar; - } hint; - HDmemset(&hint, 0, sizeof hint); - hint.hdr.totalLength = sizeof hint; - hint.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION; - hint.mar.structLen = sizeof hint.mar; - hint.mar.structType = GPFS_MULTIPLE_ACCESS_RANGE; - hint.mar.accRangeCnt = 1; - hint.mar.accRangeArray[0].blockNumber = addr / file->blksize; - hint.mar.accRangeArray[0].start = addr % file->blksize; - hint.mar.accRangeArray[0].length = MIN(file->blksize-hint.mar.accRangeArray[0].start, size); - hint.mar.accRangeArray[0].isWrite = 1; - if (gpfs_fcntl(file->fd, &hint)<0) - HGOTO_ERROR(H5E_FILE, H5E_FCNTL, NULL, "failed to send hints to GPFS") - } -#endif /* H5_HAVE_GPFS */ - } - - /* Seek to the correct location */ - if(addr != file->pos || OP_WRITE != file->op) { - if(HDlseek(file->fd, (HDoff_t)addr, SEEK_SET) < 0) - HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") - } /* end if */ - - /* Write data, being careful of interrupted system calls, partial results, - * and the end of the file. - */ - while(size > 0) { - - h5_posix_io_t bytes_in = 0; /* # of bytes to write */ - h5_posix_io_ret_t bytes_wrote = -1; /* # of bytes actually written */ - - /* Trying to write more bytes than the return type can handle is - * undefined behavior in POSIX. - */ - if(size > H5_POSIX_MAX_IO_BYTES) - bytes_in = H5_POSIX_MAX_IO_BYTES; - else - bytes_in = (h5_posix_io_t)size; - - do { - bytes_wrote = HDwrite(file->fd, buf, bytes_in); - } while(-1 == bytes_wrote && EINTR == errno); - - if(-1 == bytes_wrote) { /* error */ - int myerrno = errno; - time_t mytime = HDtime(NULL); - HDoff_t myoffset = HDlseek(file->fd, (HDoff_t)0, SEEK_CUR); - - HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file write failed: time = %s, file descriptor = %d, errno = %d, error message = '%s', buf = %p, total write size = %llu, bytes this sub-write = %llu, bytes actually written = %llu, offset = %llu", HDctime(&mytime), file->fd, myerrno, HDstrerror(myerrno), buf, (unsigned long long)size, (unsigned long long)bytes_in, (unsigned long long)bytes_wrote, (unsigned long long)myoffset); - } /* end if */ - - if(0 == bytes_wrote) { - /* end of file but not end of format address space */ - HDmemset(buf, 0, size); - break; - } /* end if */ - - HDassert(bytes_wrote >= 0); - HDassert((size_t)bytes_wrote <= size); - - size -= (size_t)bytes_wrote; - addr += (haddr_t)bytes_wrote; - buf = (char *)buf + bytes_wrote; - } /* end while */ - - /* Update current position */ - file->pos = addr; - file->op = OP_WRITE; - -done: - /* Check for error */ - if(ret_value < 0) { - /* Reset last file I/O information */ - file->pos = HADDR_UNDEF; - file->op = OP_UNKNOWN; - } /* end if */ -#if 0 /* JRM */ - /* Since metadata writes are now done by process 0 only, this broadcast - * is no longer needed. I leave it in and commented out to remind us - * that we need to re-work this function to reflect this reallity. - * - * -- JRM 9/1/05 - */ - - /* Guard against getting into metadata broadcast in failure cases */ - else { - /* when only one process writes, need to broadcast the ret_value to other processes */ - if (type != H5FD_MEM_DRAW) { - if (MPI_SUCCESS != (mpi_code= MPI_Bcast(&ret_value, sizeof(ret_value), MPI_BYTE, H5_PAR_META_WRITE, file->comm))) - HMPI_GOTO_ERROR(FAIL, "MPI_Bcast failed", mpi_code) - } /* end if */ - } /* end else */ -#endif /* JRM */ - - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_write() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_truncate - * - * Purpose: Makes sure that the true file size is the same (or larger) - * than the end-of-address. - * - * Return: SUCCEED/FAIL - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_mpiposix_truncate(H5FD_t *_file, hid_t UNUSED dxpl_id, hbool_t UNUSED closing) -{ - H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; - herr_t ret_value = SUCCEED; /* Return value */ - int mpi_code; /* MPI return code */ - - FUNC_ENTER_NOAPI_NOINIT - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - /* Extend the file to make sure it's large enough */ - if(file->eoa > file->last_eoa) { - /* Use the round-robin process to truncate (extend) the file */ - if(file->mpi_rank == H5_PAR_META_WRITE) { - -#ifdef H5_HAVE_WIN32_API - LARGE_INTEGER li; /* 64-bit (union) integer for SetFilePointer() call */ - DWORD dwPtrLow; /* Low-order pointer bits from SetFilePointer() - * Only used as an error code here. - */ - DWORD dwError; /* DWORD error code from GetLastError() */ - BOOL bError; /* Boolean error flag */ - - /* Windows uses this odd QuadPart union for 32/64-bit portability */ - li.QuadPart = (__int64)file->eoa; - - /* Extend the file to make sure it's large enough. - * - * Since INVALID_SET_FILE_POINTER can technically be a valid return value - * from SetFilePointer(), we also need to check GetLastError(). - */ - dwPtrLow = SetFilePointer(file->hFile, li.LowPart, &li.HighPart, FILE_BEGIN); - if(INVALID_SET_FILE_POINTER == dwPtrLow) { - dwError = GetLastError(); - if(dwError != NO_ERROR ) - HGOTO_ERROR(H5E_FILE, H5E_FILEOPEN, FAIL, "unable to set file pointer") - } - - bError = SetEndOfFile(file->hFile); - if(0 == bError) - HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") -#else /* H5_HAVE_WIN32_API */ -#ifdef H5_VMS - /* Reset seek offset to the beginning of the file, so that the file isn't - * re-extended later. This may happen on Open VMS. */ - if(-1 == HDlseek(file->fd, (HDoff_t)0, SEEK_SET)) - HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") -#endif /* H5_VMS */ - if(-1 == HDftruncate(file->fd, (HDoff_t)file->eoa)) - HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") -#endif /* H5_HAVE_WIN32_API */ - } /* end if */ - - /* Don't let any proc return until all have extended the file. - * (Prevents race condition where some processes go ahead and write - * more data to the file before all the processes have finished making - * it the shorter length, potentially truncating the file and dropping - * the new data written) - */ - if(MPI_SUCCESS != (mpi_code = MPI_Barrier(file->comm))) - HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code) - - /* Update the 'last' eoa and eof values */ - file->last_eoa = file->eoa; - file->eof = file->eoa; - - /* Reset last file I/O information */ - file->pos = HADDR_UNDEF; - file->op = OP_UNKNOWN; - } /* end if */ - -done: - FUNC_LEAVE_NOAPI(ret_value) -} /* end H5FD_mpiposix_truncate() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_mpi_rank - * - * Purpose: Returns the MPI rank for a process - * - * Return: MPI rank. Cannot report failure. - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static int -H5FD_mpiposix_mpi_rank(const H5FD_t *_file) -{ - const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; - - FUNC_ENTER_NOAPI_NOINIT_NOERR - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - FUNC_LEAVE_NOAPI(file->mpi_rank) -} /* end H5FD_mpiposix_mpi_rank() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_mpi_size - * - * Purpose: Returns the number of MPI processes - * - * Return: The number of MPI processes. Cannot report failure. - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static int -H5FD_mpiposix_mpi_size(const H5FD_t *_file) -{ - const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; - - FUNC_ENTER_NOAPI_NOINIT_NOERR - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - FUNC_LEAVE_NOAPI(file->mpi_size) -} /* end H5FD_mpiposix_mpi_size() */ - - -/*------------------------------------------------------------------------- - * Function: H5FD_mpiposix_communicator - * - * Purpose: Returns the MPI communicator for the file. - * - * Return: The MPI communicator. Cannot report failure. - * - * Programmer: Quincey Koziol - * Thursday, July 11, 2002 - * - *------------------------------------------------------------------------- - */ -static MPI_Comm -H5FD_mpiposix_communicator(const H5FD_t *_file) -{ - const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; - - FUNC_ENTER_NOAPI_NOINIT_NOERR - - HDassert(file); - HDassert(H5FD_MPIPOSIX == file->pub.driver_id); - - FUNC_LEAVE_NOAPI(file->comm) -} /* end H5FD_mpi_posix_communicator() */ - -#endif /*H5_HAVE_PARALLEL*/ |