diff options
author | Allen Byrne <50328838+byrnHDF@users.noreply.github.com> | 2022-08-09 23:11:14 (GMT) |
---|---|---|
committer | GitHub <noreply@github.com> | 2022-08-09 23:11:14 (GMT) |
commit | 4c66bf627ec4b963f026bbfa7101127271644f79 (patch) | |
tree | 4a4352a58dde0a80f7f72eab56484ddd94ec2294 /src/H5Fmodule.h | |
parent | fc9f31ad8c8ff4122e8bb2997e0a2bfa89cb054b (diff) | |
download | hdf5-4c66bf627ec4b963f026bbfa7101127271644f79.zip hdf5-4c66bf627ec4b963f026bbfa7101127271644f79.tar.gz hdf5-4c66bf627ec4b963f026bbfa7101127271644f79.tar.bz2 |
Merge UG from 1.10 and add prelim vol section (#1980)
* Merge UG from 1.10 and add prelim vol section
* Spelling fixes
* Merge format and autotools javadoc from 1.10
Diffstat (limited to 'src/H5Fmodule.h')
-rw-r--r-- | src/H5Fmodule.h | 1443 |
1 files changed, 1442 insertions, 1 deletions
diff --git a/src/H5Fmodule.h b/src/H5Fmodule.h index 81c1ede..523d6bf 100644 --- a/src/H5Fmodule.h +++ b/src/H5Fmodule.h @@ -29,7 +29,1448 @@ #define H5_MY_PKG_ERR H5E_FILE #define H5_MY_PKG_INIT YES -/**\defgroup H5F H5F +/** \page H5F_UG The HDF5 File + * + * \section sec_file The HDF5 File + * \subsection subsec_file_intro Introduction + * The purpose of this chapter is to describe how to work with HDF5 data files. + * + * If HDF5 data is to be written to or read from a file, the file must first be explicitly created or + * opened with the appropriate file driver and access privileges. Once all work with the file is + * complete, the file must be explicitly closed. + * + * This chapter discusses the following: + * \li File access modes + * \li Creating, opening, and closing files + * \li The use of file creation property lists + * \li The use of file access property lists + * \li The use of low-level file drivers + * + * This chapter assumes an understanding of the material presented in the data model chapter. For + * more information, @see @ref sec_data_model. + * + * \subsection subsec_file_access_modes File Access Modes + * There are two issues regarding file access: + * <ul><li>What should happen when a new file is created but a file of the same name already + * exists? Should the create action fail, or should the existing file be overwritten?</li> + * <li>Is a file to be opened with read-only or read-write access?</li></ul> + * + * Four access modes address these concerns. Two of these modes can be used with #H5Fcreate, and + * two modes can be used with #H5Fopen. + * \li #H5Fcreate accepts #H5F_ACC_EXCL or #H5F_ACC_TRUNC + * \li #H5Fopen accepts #H5F_ACC_RDONLY or #H5F_ACC_RDWR + * + * The access modes are described in the table below. + * + * <table> + * <caption>Access flags and modes</caption> + * <tr> + * <th>Access Flag</th> + * <th>Resulting Access Mode</th> + * </tr> + * <tr> + * <td>#H5F_ACC_EXCL</td> + * <td>If the file already exists, #H5Fcreate fails. If the file does not exist, + * it is created and opened with read-write access. (Default)</td> + * </tr> + * <tr> + * <td>#H5F_ACC_TRUNC</td> + * <td>If the file already exists, the file is opened with read-write access, + * and new data will overwrite any existing data. If the file does not exist, + * it is created and opened with read-write access.</td> + * </tr> + * <tr> + * <td>#H5F_ACC_RDONLY</td> + * <td>An existing file is opened with read-only access. If the file does not + * exist, #H5Fopen fails. (Default)</td> + * </tr> + * <tr> + * <td>#H5F_ACC_RDWR</td> + * <td>An existing file is opened with read-write access. If the file does not + * exist, #H5Fopen fails.</td> + * </tr> + * </table> + * + * By default, #H5Fopen opens a file for read-only access; passing #H5F_ACC_RDWR allows + * read-write access to the file. + * + * By default, #H5Fcreate fails if the file already exists; only passing #H5F_ACC_TRUNC allows + * the truncating of an existing file. + * + * \subsection subsec_file_creation_access File Creation and File Access Properties + * File creation and file access property lists control the more complex aspects of creating and + * accessing files. + * + * File creation property lists control the characteristics of a file such as the size of the userblock, + * a user-definable data block; the size of data address parameters; properties of the B-trees that are + * used to manage the data in the file; and certain HDF5 Library versioning information. + * + * For more information, @see @ref subsubsec_file_property_lists_props. + * + * This section has a more detailed discussion of file creation properties. If you have no special + * requirements for these file characteristics, you can simply specify #H5P_DEFAULT for the default + * file creation property list when a file creation property list is called for. + * + * File access property lists control properties and means of accessing a file such as data alignment + * characteristics, metadata block and cache sizes, data sieve buffer size, garbage collection + * settings, and parallel I/O. Data alignment, metadata block and cache sizes, and data sieve buffer + * size are factors in improving I/O performance. + * + * For more information, @see @ref subsubsec_file_property_lists_access. + * + * This section has a more detailed discussion of file access properties. If you have no special + * requirements for these file access characteristics, you can simply specify #H5P_DEFAULT for the + * default file access property list when a file access property list is called for. + * + * <table> + * <caption>Figure 10 - More sample file structures</caption> + * <tr> + * <td> + * \image html UML_FileAndProps.gif "UML model for an HDF5 file and its property lists" + * </td> + * </tr> + * </table> + * + * \subsection subsec_file_drivers Low-level File Drivers + * The concept of an HDF5 file is actually rather abstract: the address space for what is normally + * thought of as an HDF5 file might correspond to any of the following at the storage level: + * \li Single file on a standard file system + * \li Multiple files on a standard file system + * \li Multiple files on a parallel file system + * \li Block of memory within an application’s memory space + * \li More abstract situations such as virtual files + * + * This HDF5 address space is generally referred to as an HDF5 file regardless of its organization at + * the storage level. + * + * HDF5 accesses a file (the address space) through various types of low-level file drivers. The + * default HDF5 file storage layout is as an unbuffered permanent file which is a single, contiguous + * file on local disk. Alternative layouts are designed to suit the needs of a variety of systems, + * environments, and applications. + * + * \subsection subsec_file_program_model Programming Model for Files + * Programming models for creating, opening, and closing HDF5 files are described in the + * sub-sections below. + * + * \subsubsection subsubsec_file_program_model_create Creating a New File + * The programming model for creating a new HDF5 file can be summarized as follows: + * \li Define the file creation property list + * \li Define the file access property list + * \li Create the file + * + * First, consider the simple case where we use the default values for the property lists. See the + * example below. + * + * <em>Creating an HDF5 file using property list defaults</em> + * \code + * file_id = H5Fcreate ("SampleFile.h5", H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT) + * \endcode + * + * Note: The example above specifies that #H5Fcreate should fail if SampleFile.h5 already exists. + * + * A more complex case is shown in the example below. In this example, we define file creation + * and access property lists (though we do not assign any properties), specify that #H5Fcreate + * should fail if SampleFile.h5 already exists, and create a new file named SampleFile.h5. The example + * does not specify a driver, so the default driver, #H5FD_SEC2, will be used. + * + * <em>Creating an HDF5 file using property lists</em> + * \code + * fcplist_id = H5Pcreate (H5P_FILE_CREATE) + * <...set desired file creation properties...> + * faplist_id = H5Pcreate (H5P_FILE_ACCESS) + * <...set desired file access properties...> + * file_id = H5Fcreate ("SampleFile.h5", H5F_ACC_EXCL, fcplist_id, faplist_id) + * \endcode + * Notes: + * 1. A root group is automatically created in a file when the file is first created. + * + * 2. File property lists, once defined, can be reused when another file is created within the same + * application. + * + * \subsubsection subsubsec_file_program_model_open Opening an Existing File + * The programming model for opening an existing HDF5 file can be summarized as follows: + * <ul><li>Define or modify the file access property list including a low-level file driver (optional)</li> + * <li>Open the file</li></ul> + * + * The code in the example below shows how to open an existing file with read-only access. + * + * <em>Opening an HDF5 file</em> + * \code + * faplist_id = H5Pcreate (H5P_FILE_ACCESS) + * status = H5Pset_fapl_stdio (faplist_id) + * file_id = H5Fopen ("SampleFile.h5", H5F_ACC_RDONLY, faplist_id) + * \endcode + * + * \subsubsection subsubsec_file_program_model_close Closing a File + * The programming model for closing an HDF5 file is very simple: + * \li Close file + * + * We close SampleFile.h5 with the code in the example below. + * + * <em>Closing an HDF5 file</em> + * \code + * status = H5Fclose (file_id) + * \endcode + * Note that #H5Fclose flushes all unwritten data to storage and that file_id is the identifier returned + * for SampleFile.h5 by #H5Fopen. + * + * More comprehensive discussions regarding all of these steps are provided below. + * + * \subsection subsec_file_h5dump Using h5dump to View a File + * h5dump is a command-line utility that is included in the HDF5 distribution. This program + * provides a straight-forward means of inspecting the contents of an HDF5 file. You can use + * h5dump to verify that a program is generating the intended HDF5 file. h5dump displays ASCII + * output formatted according to the HDF5 DDL grammar. + * + * The following h5dump command will display the contents of SampleFile.h5: + * \code + * h5dump SampleFile.h5 + * \endcode + * + * If no datasets or groups have been created in and no data has been written to the file, the output + * will look something like the following: + * \code + * HDF5 "SampleFile.h5" { + * GROUP "/" { + * } + * } + * \endcode + * + * Note that the root group, indicated above by /, was automatically created when the file was created. + * + * h5dump is described on the + * <a href="https://portal.hdfgroup.org/display/HDF5/h5dump">Tools</a> + * page under + * <a href="https://portal.hdfgroup.org/display/HDF5/Libraries+and+Tools+Reference"> + * Libraries and Tools Reference</a>. + * The HDF5 DDL grammar is described in the document \ref DDLBNF110. + * + * \subsection subsec_file_summary File Function Summaries + * General library (\ref H5 functions and macros), (\ref H5F functions), file related + * (\ref H5P functions), and file driver (\ref H5P functions) are listed below. + * + * <table> + * <caption>General library functions and macros</caption> + * <tr> + * <th>Function</th> + * <th>Purpose</th> + * </tr> + * <tr> + * <td>#H5check_version</td> + * <td>Verifies that HDF5 library versions are consistent.</td> + * </tr> + * <tr> + * <td>#H5close</td> + * <td>Flushes all data to disk, closes all open identifiers, and cleans up memory.</td> + * </tr> + * <tr> + * <td>#H5dont_atexit</td> + * <td>Instructs the library not to install the atexit cleanup routine.</td> + * </tr> + * <tr> + * <td>#H5garbage_collect</td> + * <td>Garbage collects on all free-lists of all types.</td> + * </tr> + * <tr> + * <td>#H5get_libversion</td> + * <td>Returns the HDF library release number.</td> + * </tr> + * <tr> + * <td>#H5open</td> + * <td>Initializes the HDF5 library.</td> + * </tr> + * <tr> + * <td>#H5set_free_list_limits</td> + * <td>Sets free-list size limits.</td> + * </tr> + * <tr> + * <td>#H5_VERSION_GE</td> + * <td>Determines whether the version of the library being used is greater than or equal + * to the specified version.</td> + * </tr> + * <tr> + * <td>#H5_VERSION_LE</td> + * <td>Determines whether the version of the library being used is less than or equal + * to the specified version.</td> + * </tr> + * </table> + * + * <table> + * <caption>File functions </caption> + * <tr> + * <th>Function</th> + * <th>Purpose</th> + * </tr> + * <tr> + * <td>#H5Fclear_elink_file_cache</td> + * <td>Clears the external link open file cache for a file.</td> + * </tr> + * <tr> + * <td>#H5Fclose</td> + * <td>Closes HDF5 file.</td> + * </tr> + * <tr> + * <td>#H5Fcreate</td> + * <td>Creates new HDF5 file.</td> + * </tr> + * <tr> + * <td>#H5Fflush</td> + * <td>Flushes data to HDF5 file on storage medium.</td> + * </tr> + * <tr> + * <td>#H5Fget_access_plist</td> + * <td>Returns a file access property list identifier.</td> + * </tr> + * <tr> + * <td>#H5Fget_create_plist</td> + * <td>Returns a file creation property list identifier.</td> + * </tr> + * <tr> + * <td>#H5Fget_file_image</td> + * <td>Retrieves a copy of the image of an existing, open file.</td> + * </tr> + * <tr> + * <td>#H5Fget_filesize</td> + * <td>Returns the size of an HDF5 file.</td> + * </tr> + * <tr> + * <td>#H5Fget_freespace</td> + * <td>Returns the amount of free space in a file.</td> + * </tr> + * <tr> + * <td>#H5Fget_info</td> + * <td>Returns global information for a file.</td> + * </tr> + * <tr> + * <td>#H5Fget_intent</td> + * <td>Determines the read/write or read-only status of a file.</td> + * </tr> + * <tr> + * <td>#H5Fget_mdc_config</td> + * <td>Obtain current metadata cache configuration for target file.</td> + * </tr> + * <tr> + * <td>#H5Fget_mdc_hit_rate</td> + * <td>Obtain target file’s metadata cache hit rate.</td> + * </tr> + * <tr> + * <td>#H5Fget_mdc_size</td> + * <td>Obtain current metadata cache size data for specified file.</td> + * </tr> + * <tr> + * <td>#H5Fget_mpi_atomicity</td> + * <td>Retrieves the atomicity mode in use.</td> + * </tr> + * <tr> + * <td>#H5Fget_name</td> + * <td>Retrieves the name of the file to which the object belongs.</td> + * </tr> + * <tr> + * <td>#H5Fget_obj_count</td> + * <td>Returns the number of open object identifiers for an open file.</td> + * </tr> + * <tr> + * <td>#H5Fget_obj_ids</td> + * <td>Returns a list of open object identifiers.</td> + * </tr> + * <tr> + * <td>#H5Fget_vfd_handle</td> + * <td>Returns pointer to the file handle from the virtual file driver.</td> + * </tr> + * <tr> + * <td>#H5Fis_hdf5</td> + * <td>Determines whether a file is in the HDF5 format.</td> + * </tr> + * <tr> + * <td>#H5Fmount</td> + * <td>Mounts a file.</td> + * </tr> + * <tr> + * <td>#H5Fopen</td> + * <td>Opens an existing HDF5 file.</td> + * </tr> + * <tr> + * <td>#H5Freopen</td> + * <td>Returns a new identifier for a previously-opened HDF5 file.</td> + * </tr> + * <tr> + * <td>#H5Freset_mdc_hit_rate_stats</td> + * <td>Reset hit rate statistics counters for the target file.</td> + * </tr> + * <tr> + * <td>#H5Fset_mdc_config</td> + * <td>Use to configure metadata cache of target file.</td> + * </tr> + * <tr> + * <td>#H5Fset_mpi_atomicity</td> + * <td>Use to set the MPI atomicity mode.</td> + * </tr> + * <tr> + * <td>#H5Funmount</td> + * <td>Unmounts a file.</td> + * </tr> + * </table> + * + * <table> + * <caption>File creation property list functions </caption> + * <tr> + * <th>Function</th> + * <th>Purpose</th> + * </tr> + * <tr> + * <td>#H5Pset_userblock/#H5Pget_userblock</td> + * <td>Sets/retrieves size of userblock.</td> + * </tr> + * <tr> + * <td>#H5Pset_sizes/#H5Pget_sizes</td> + * <td>Sets/retrieves byte size of offsets and lengths used to address objects in HDF5 file.</td> + * </tr> + * <tr> + * <td>#H5Pset_sym_k/#H5Pget_sym_k</td> + * <td>Sets/retrieves size of parameters used to control symbol table nodes.</td> + * </tr> + * <tr> + * <td>#H5Pset_istore_k/#H5Pget_istore_k</td> + * <td>Sets/retrieves size of parameter used to control B-trees for indexing chunked datasets.</td> + * </tr> + * <tr> + * <td>#H5Pset_file_image</td> + * <td>Sets an initial file image in a memory buffer.</td> + * </tr> + * <tr> + * <td>#H5Pget_file_image</td> + * <td>Retrieves a copy of the file image designated as the initial content and structure of a file.</td> + * </tr> + * <tr> + * <td>#H5Pset_shared_mesg_nindexes/#H5Pget_shared_mesg_nindexes</td> + * <td>Sets or retrieves number of shared object header message indexes in file + * creation property list.</td> + * </tr> + * <tr> + * <td>#H5Pset_shared_mesg_index</td> + * <td>Configures the specified shared object header message index.</td> + * </tr> + * <tr> + * <td>#H5Pget_shared_mesg_index</td> + * <td>Retrieves the configuration settings for a shared message index.</td> + * </tr> + * <tr> + * <td>#H5Pset_shared_mesg_phase_change/#H5Pget_shared_mesg_phase_change</td> + * <td>Sets or retrieves shared object header message storage phase change thresholds.</td> + * </tr> + * <tr> + * <td>#H5Pget_version</td> + * <td></td> + * </tr> + * </table> + * + * <table> + * <caption>File access property list functions </caption> + * <tr> + * <th>Function</th> + * <th>Purpose</th> + * </tr> + * <tr> + * <td>#H5Pset_alignment/#H5Pget_alignment</td> + * <td>Sets/retrieves alignment properties.</td> + * </tr> + * <tr> + * <td>#H5Pset_cache/#H5Pget_cache</td> + * <td>Sets/retrieves metadata cache and raw data chunk cache parameters.</td> + * </tr> + * <tr> + * <td>#H5Pset_elink_file_cache_size/#H5Pget_elink_file_cache_size</td> + * <td>Sets/retrieves the size of the external link open file cache from the specified + * file access property list.</td> + * </tr> + * <tr> + * <td>#H5Pset_gc_references/#H5Pget_gc_references</td> + * <td>Sets/retrieves garbage collecting references flag.</td> + * </tr> + * <tr> + * <td>#H5Pset_family_offset</td> + * <td>Sets offset property for low-level access to a file in a family of files.</td> + * </tr> + * <tr> + * <td>#H5Pget_family_offset</td> + * <td>Retrieves a data offset from the file access property list.</td> + * </tr> + * <tr> + * <td>#H5Pset_meta_block_size/#H5Pget_meta_block_size</td> + * <td>Sets the minimum metadata blocksize or retrieves the current metadata block size setting.</td> + * </tr> + * <tr> + * <td>#H5Pset_mdc_config</td> + * <td>Set the initial metadata cache configuration in the indicated File Access Property List + * to the supplied value.</td> + * </tr> + * <tr> + * <td>#H5Pget_mdc_config</td> + * <td>Get the current initial metadata cache config-uration from the indicated File Access + * Property List.</td> + * </tr> + * <tr> + * <td>#H5Pset_sieve_buf_size/#H5Pget_sieve_buf_size</td> + * <td>Sets/retrieves maximum size of data sieve buffer.</td> + * </tr> + * <tr> + * <td>#H5Pset_libver_bounds</td> + * <td>Sets bounds on library versions, and indirectly format versions, to be used + * when creating objects.</td> + * </tr> + * <tr> + * <td>#H5Pget_libver_bounds</td> + * <td>Retrieves library version bounds settings that indirectly control the format + * versions used when creating objects.</td> + * </tr> + * <tr> + * <td>#H5Pset_small_data_block_size</td> + * <td>Sets the size of a contiguous block reserved for small data.</td> + * </tr> + * <tr> + * <td>#H5Pget_small_data_block_size</td> + * <td>Retrieves the current small data block size setting.</td> + * </tr> + * </table> + * + * <table> + * <caption>File driver functions </caption> + * <tr> + * <th>Function</th> + * <th>Purpose</th> + * </tr> + * <tr> + * <td>#H5Pset_driver</td> + * <td>Sets a file driver.</td> + * </tr> + * <tr> + * <td>#H5Pget_driver</td> + * <td>Returns the identifier for the driver used to create a file.</td> + * </tr> + * <tr> + * <td>#H5Pget_driver_info</td> + * <td>Returns a pointer to file driver information.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_core/#H5Pget_fapl_core</td> + * <td>Sets the driver for buffered memory files (in RAM) or retrieves information regarding + * the driver.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_direct/#H5Pget_fapl_direct</td> + * <td>Sets up use of the direct I/O driver or retrieves the direct I/O driver settings.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_family/#H5Pget_fapl_family</td> + * <td>Sets driver for file families, designed for systems that do not support files + * larger than 2 gigabytes, or retrieves information regarding driver.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_log</td> + * <td>Sets logging driver.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_mpio/#H5Pget_fapl_mpio</td> + * <td>Sets driver for files on parallel file systems (MPI I/O) or retrieves information + * regarding the driver.</td> + * </tr> + * <tr> + * <td>H5Pset_fapl_mpiposix/H5Pget_fapl_mpiposix</td> + * <td>No longer available.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_multi/#H5Pget_fapl_multi</td> + * <td>Sets driver for multiple files, separating categories of metadata and raw data, + * or retrieves information regarding driver.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_sec2</td> + * <td>Sets driver for unbuffered permanent files or retrieves information regarding driver.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_split</td> + * <td>Sets driver for split files, a limited case of multiple files with one metadata file + * and one raw data file.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_stdio</td> + * <td>Sets driver for buffered permanent files.</td> + * </tr> + * <tr> + * <td>#H5Pset_fapl_windows</td> + * <td>Sets the Windows I/O driver.</td> + * </tr> + * <tr> + * <td>#H5Pset_multi_type</td> + * <td>Specifies type of data to be accessed via the MULTI driver enabling more direct access.</td> + * </tr> + * <tr> + * <td>#H5Pget_multi_type</td> + * <td>Retrieves type of data property for MULTI driver.</td> + * </tr> + * </table> + * + * \subsection subsec_file_create Creating or Opening an HDF5 File + * This section describes in more detail how to create and how to open files. + * + * New HDF5 files are created and opened with #H5Fcreate; existing files are opened with + * #H5Fopen. Both functions return an object identifier which must eventually be released by calling + * #H5Fclose. + * + * To create a new file, call #H5Fcreate: + * \code + * hid_t H5Fcreate (const char *name, unsigned flags, hid_t fcpl_id, hid_t fapl_id) + * \endcode + * + * #H5Fcreate creates a new file named name in the current directory. The file is opened with read + * and write access; if the #H5F_ACC_TRUNC flag is set, any pre-existing file of the same name in + * the same directory is truncated. If #H5F_ACC_TRUNC is not set or #H5F_ACC_EXCL is set and + * if a file of the same name exists, #H5Fcreate will fail. + * + * The new file is created with the properties specified in the property lists fcpl_id and fapl_id. + * fcpl is short for file creation property list. fapl is short for file access property list. Specifying + * #H5P_DEFAULT for either the creation or access property list will use the library’s default + * creation or access properties. + * + * If #H5Fcreate successfully creates the file, it returns a file identifier for the new file. This + * identifier will be used by the application any time an object identifier, an OID, for the file is + * required. Once the application has finished working with a file, the identifier should be released + * and the file closed with #H5Fclose. + * + * To open an existing file, call #H5Fopen: + * \code + * hid_t H5Fopen (const char *name, unsigned flags, hid_t fapl_id) + * \endcode + * + * #H5Fopen opens an existing file with read-write access if #H5F_ACC_RDWR is set and read-only + * access if #H5F_ACC_RDONLY is set. + * + * fapl_id is the file access property list identifier. Alternatively, #H5P_DEFAULT indicates that the + * application relies on the default I/O access parameters. Creating and changing access property + * lists is documented further below. + * + * A file can be opened more than once via multiple #H5Fopen calls. Each such call returns a unique + * file identifier and the file can be accessed through any of these file identifiers as long as they + * remain valid. Each of these file identifiers must be released by calling #H5Fclose when it is no + * longer needed. + * + * For more information, @see @ref subsubsec_file_property_lists_access. + * For more information, @see @ref subsec_file_property_lists. + * + * \subsection subsec_file_closes Closing an HDF5 File + * #H5Fclose both closes a file and releases the file identifier returned by #H5Fopen or #H5Fcreate. + * #H5Fclose must be called when an application is done working with a file; while the HDF5 + * Library makes every effort to maintain file integrity, failure to call #H5Fclose may result in the + * file being abandoned in an incomplete or corrupted state. + * + * To close a file, call #H5Fclose: + * \code + * herr_t H5Fclose (hid_t file_id) + * \endcode + * This function releases resources associated with an open file. After closing a file, the file + * identifier, file_id, cannot be used again as it will be undefined. + * + * #H5Fclose fulfills three purposes: to ensure that the file is left in an uncorrupted state, to ensure + * that all data has been written to the file, and to release resources. Use #H5Fflush if you wish to + * ensure that all data has been written to the file but it is premature to close it. + * + * Note regarding serial mode behavior: When #H5Fclose is called in serial mode, it closes the file + * and terminates new access to it, but it does not terminate access to objects that remain + * individually open within the file. That is, if #H5Fclose is called for a file but one or more objects + * within the file remain open, those objects will remain accessible until they are individually + * closed. To illustrate, assume that a file, fileA, contains a dataset, data_setA, and that both are + * open when #H5Fclose is called for fileA. data_setA will remain open and accessible, including + * writable, until it is explicitly closed. The file will be automatically and finally closed once all + * objects within it have been closed. + * + * Note regarding parallel mode behavior: Once #H5Fclose has been called in parallel mode, access + * is no longer available to any object within the file. + * + * \subsection subsec_file_property_lists File Property Lists + * Additional information regarding file structure and access are passed to #H5Fcreate and + * #H5Fopen through property list objects. Property lists provide a portable and extensible method of + * modifying file properties via simple API functions. There are two kinds of file-related property + * lists: + * \li File creation property lists + * \li File access property lists + * + * In the following sub-sections, we discuss only one file creation property, userblock size, in detail + * as a model for the user. Other file creation and file access properties are mentioned and defined + * briefly, but the model is not expanded for each; complete syntax, parameter, and usage + * information for every property list function is provided in the \ref H5P + * section of the HDF5 Reference Manual. + * + * For more information, @see @ref sec_plist. + * + * \subsubsection subsubsec_file_property_lists_create Creating a Property List + * If you do not wish to rely on the default file creation and access properties, you must first create + * a property list with #H5Pcreate. + * \code + * hid_t H5Pcreate (hid_t cls_id) + * \endcode + * cls_id is the type of property list being created. In this case, the appropriate values are + * #H5P_FILE_CREATE for a file creation property list and #H5P_FILE_ACCESS for a file access + * property list. + * + * Thus, the following calls create a file creation property list and a file access property list with + * identifiers fcpl_id and fapl_id, respectively: + * \code + * fcpl_id = H5Pcreate (H5P_FILE_CREATE) + * fapl_id = H5Pcreate (H5P_FILE_ACCESS) + * \endcode + * + * Once the property lists have been created, the properties themselves can be modified via the + * functions described in the following sub-sections. + * + * \subsubsection subsubsec_file_property_lists_props File Creation Properties + * File creation property lists control the file metadata, which is maintained in the superblock of the + * file. These properties are used only when a file is first created. + * + * <h4>Userblock Size</h4> + * \code + * herr_t H5Pset_userblock (hid_t plist, hsize_t size) + * herr_t H5Pget_userblock (hid_t plist, hsize_t *size) + * \endcode + * + * The userblock is a fixed-length block of data located at the beginning of the file and is ignored + * by the HDF5 library. This block is specifically set aside for any data or information that + * developers determine to be useful to their applications but that will not be used by the HDF5 + * library. The size of the userblock is defined in bytes and may be set to any power of two with a + * minimum size of 512 bytes. In other words, userblocks might be 512, 1024, or 2048 bytes in + * size. + * + * This property is set with #H5Pset_userblock and queried via #H5Pget_userblock. For example, if + * an application needed a 4K userblock, then the following function call could be used: + * \code + * status = H5Pset_userblock(fcpl_id, 4096) + * \endcode + * + * The property list could later be queried with: + * \code + * status = H5Pget_userblock(fcpl_id, size) + * \endcode + * and the value 4096 would be returned in the parameter size. + * + * Other properties, described below, are set and queried in exactly the same manner. Syntax and + * usage are detailed in the @ref H5P section of the HDF5 Reference Manual. + * + * <h4>Offset and Length Sizes</h4> + * This property specifies the number of bytes used to store the offset and length of objects in the + * HDF5 file. Values of 2, 4, and 8 bytes are currently supported to accommodate 16-bit, 32-bit, + * and 64-bit file address spaces. + * + * These properties are set and queried via #H5Pset_sizes and #H5Pget_sizes. + * + * <h4>Symbol Table Parameters</h4> + * The size of symbol table B-trees can be controlled by setting the 1/2-rank and 1/2-node size + * parameters of the B-tree. + * + * These properties are set and queried via #H5Pset_sym_k and #H5Pget_sym_k + * + * <h4>Indexed Storage Parameters</h4> + * The size of indexed storage B-trees can be controlled by setting the 1/2-rank and 1/2-node size + * parameters of the B-tree. + * + * These properties are set and queried via #H5Pset_istore_k and #H5Pget_istore_k. + * + * <h4>Version Information</h4> + * Various objects in an HDF5 file may over time appear in different versions. The HDF5 Library + * keeps track of the version of each object in the file. + * + * Version information is retrieved via #H5Pget_version. + * + * \subsubsection subsubsec_file_property_lists_access File Access Properties + * This section discusses file access properties that are not related to the low-level file drivers. File + * drivers are discussed separately later in this chapter. + * For more information, @see @ref subsec_file_alternate_drivers. + * + * File access property lists control various aspects of file I/O and structure. + * + * <h4>Data Alignment</h4> + * Sometimes file access is faster if certain data elements are aligned in a specific manner. This can + * be controlled by setting alignment properties via the #H5Pset_alignment function. There are two + * values involved: + * \li A threshold value + * \li An alignment interval + * + * Any allocation request at least as large as the threshold will be aligned on an address that is a + * multiple of the alignment interval. + * + * <h4>Metadata Block Allocation Size</h4> + * Metadata typically exists as very small chunks of data; storing metadata elements in a file + * without blocking them can result in hundreds or thousands of very small data elements in the + * file. This can result in a highly fragmented file and seriously impede I/O. By blocking metadata + * elements, these small elements can be grouped in larger sets, thus alleviating both problems. + * + * #H5Pset_meta_block_size sets the minimum size in bytes of metadata block allocations. + * #H5Pget_meta_block_size retrieves the current minimum metadata block allocation size. + * + * <h4>Metadata Cache</h4> + * Metadata and raw data I/O speed are often governed by the size and frequency of disk reads and + * writes. In many cases, the speed can be substantially improved by the use of an appropriate + * cache. + * + * #H5Pset_cache sets the minimum cache size for both metadata and raw data and a preemption + * value for raw data chunks. #H5Pget_cache retrieves the current values. + * + * <h4>Data Sieve Buffer Size</h4> + * Data sieve buffering is used by certain file drivers to speed data I/O and is most commonly when + * working with dataset hyperslabs. For example, using a buffer large enough to hold several pieces + * of a dataset as it is read in for hyperslab selections will boost performance noticeably. + * + * #H5Pset_sieve_buf_size sets the maximum size in bytes of the data sieve buffer. + * #H5Pget_sieve_buf_size retrieves the current maximum size of the data sieve buffer. + * + * <h4>Garbage Collection References</h4> + * Dataset region references and other reference types use space in an HDF5 file’s global heap. If + * garbage collection is on (1) and the user passes in an uninitialized value in a reference structure, + * the heap might become corrupted. When garbage collection is off (0), however, and the user reuses + * a reference, the previous heap block will be orphaned and not returned to the free heap + * space. When garbage collection is on, the user must initialize the reference structures to 0 or risk + * heap corruption. + * + * #H5Pset_gc_references sets the garbage collecting references flag. + * + * \subsection subsec_file_alternate_drivers Alternate File Storage Layouts and Low-level File Drivers + * The concept of an HDF5 file is actually rather abstract: the address space for what is normally + * thought of as an HDF5 file might correspond to any of the following: + * \li Single file on standard file system + * \li Multiple files on standard file system + * \li Multiple files on parallel file system + * \li Block of memory within application’s memory space + * \li More abstract situations such as virtual files + * + * This HDF5 address space is generally referred to as an HDF5 file regardless of its organization at + * the storage level. + * + * HDF5 employs an extremely flexible mechanism called the virtual file layer, or VFL, for file + * I/O. A full understanding of the VFL is only necessary if you plan to write your own drivers + * @see \ref VFL in the HDF5 Technical Notes. + * + * For our + * purposes here, it is sufficient to know that the low-level drivers used for file I/O reside in the + * VFL, as illustrated in the following figure. Note that H5FD_STREAM is not available with 1.8.x + * and later versions of the library. + * + * <table> + * <tr> + * <td> + * \image html VFL_Drivers.gif "I/O path from application to VFL and low-level drivers to storage" + * </td> + * </tr> + * </table> + * + * As mentioned above, HDF5 applications access HDF5 files through various low-level file + * drivers. The default driver for that layout is the POSIX driver (also known as the SEC2 driver), + * #H5FD_SEC2. Alternative layouts and drivers are designed to suit the needs of a variety of + * systems, environments, and applications. The drivers are listed in the table below. + * + * <table> + * <caption id="table_file_drivers">Supported file drivers</caption> + * <tr> + * <th>Driver Name</th> + * <th>Driver Identifier</th> + * <th>Description</th> + * <th>Related API</th> + * </tr> + * <tr> + * <td>POSIX</td> + * <td>#H5FD_SEC2</td> + * <td>This driver uses POSIX file-system functions like read and write to perform I/O to a single, + * permanent file on local disk with no system buffering. This driver is POSIX-compliant and is + * the default file driver for all systems.</td> + * <td>#H5Pset_fapl_sec2</td> + * </tr> + * <tr> + * <td>Direct</td> + * <td>#H5FD_DIRECT</td> + * <td>This is the #H5FD_SEC2 driver except data is written to or read from the file + * synchronously without being cached by the system.</td> + * <td>#H5Pset_fapl_direct</td> + * </tr> + * <tr> + * <td>Log</td> + * <td>#H5FD_LOG</td> + * <td>This is the #H5FD_SEC2 driver with logging capabilities.</td> + * <td>#H5Pset_fapl_log</td> + * </tr> + * <tr> + * <td>Windows</td> + * <td>#H5FD_WINDOWS</td> + * <td>This driver was modified in HDF5-1.8.8 to be a wrapper of the POSIX driver, + * #H5FD_SEC2. This change should not affect user applications.</td> + * <td>#H5Pset_fapl_windows</td> + * </tr> + * <tr> + * <td>STDIO</td> + * <td>#H5FD_STDIO</td> + * <td>This driver uses functions from the standard C stdio.h to perform I/O + * to a single, permanent file on local disk with additional system buffering.</td> + * <td>#H5Pset_fapl_stdio</td> + * </tr> + * <tr> + * <td>Memory</td> + * <td>#H5FD_CORE</td> + * <td>With this driver, an application can work with a file in memory for faster reads and + * writes. File contents are kept in memory until the file is closed. At closing, the memory + * version of the file can be written back to disk or abandoned.</td> + * <td>#H5Pset_fapl_core</td> + * </tr> + * <tr> + * <td>Family</td> + * <td>#H5FD_FAMILY</td> + * <td>With this driver, the HDF5 file’s address space is partitioned into pieces and sent to + * separate storage files using an underlying driver of the user’s choice. This driver is for + * systems that do not support files larger than 2 gigabytes.</td> + * <td>#H5Pset_fapl_family</td> + * </tr> + * <tr> + * <td>Multi</td> + * <td>#H5FD_MULTI</td> + * <td>With this driver, data can be stored in multiple files according to the type of the data. + * I/O might work better if data is stored in separate files based on the type of data. The Split + * driver is a special case of this driver.</td> + * <td>#H5Pset_fapl_multi</td> + * </tr> + * <tr> + * <td>Split</td> + * <td>H5FD_SPLIT</td> + * <td>This file driver splits a file into two parts. One part stores metadata, and the other part + * stores raw data. This splitting a file into two parts is a limited case of the Multi driver.</td> + * <td>#H5Pset_fapl_split</td> + * </tr> + * <tr> + * <td>Parallel</td> + * <td>#H5FD_MPIO</td> + * <td>This is the standard HDF5 file driver for parallel file systems. This driver uses the MPI + * standard for both communication and file I/O.</td> + * <td>#H5Pset_fapl_mpio</td> + * </tr> + * <tr> + * <td>Parallel POSIX</td> + * <td>H5FD_MPIPOSIX</td> + * <td>This driver is no longer available</td> + * <td></td> + * </tr> + * <tr> + * <td>Stream</td> + * <td>H5FD_STREAM</td> + * <td>This driver is no longer available.</td> + * <td></td> + * </tr> + * </table> + * + * For more information, see the HDF5 Reference Manual entries for the function calls shown in + * the column on the right in the table above. + * + * Note that the low-level file drivers manage alternative file storage layouts. Dataset storage + * layouts (chunking, compression, and external dataset storage) are managed independently of file + * storage layouts. + * + * If an application requires a special-purpose low-level driver, the VFL provides a public API for + * creating one. For more information on how to create a driver, + * @see @ref VFL in the HDF5 Technical Notes. + * + * \subsubsection subsubsec_file_alternate_drivers_id Identifying the Previously‐used File Driver + * When creating a new HDF5 file, no history exists, so the file driver must be specified if it is to be + * other than the default. + * + * When opening existing files, however, the application may need to determine which low-level + * driver was used to create the file. The function #H5Pget_driver is used for this purpose. See the + * example below. + * + * <em>Identifying a driver</em> + * \code + * hid_t H5Pget_driver (hid_t fapl_id) + * \endcode + * + * #H5Pget_driver returns a constant identifying the low-level driver for the access property list + * fapl_id. For example, if the file was created with the POSIX (aka SEC2) driver, + * #H5Pget_driver returns #H5FD_SEC2. + * + * If the application opens an HDF5 file without both determining the driver used to create the file + * and setting up the use of that driver, the HDF5 Library will examine the superblock and the + * driver definition block to identify the driver. + * See the <a href="https://docs.hdfgroup.org/hdf5/develop/_s_p_e_c.html">HDF5 File Format Specification</a> + * for detailed descriptions of the superblock and the driver definition block. + * + * \subsubsection subsubsec_file_alternate_drivers_sec2 The POSIX (aka SEC2) Driver + * The POSIX driver, #H5FD_SEC2, uses functions from section 2 of the POSIX manual to access + * unbuffered files stored on a local file system. This driver is also known as the SEC2 driver. The + * HDF5 Library buffers metadata regardless of the low-level driver, but using this driver prevents + * data from being buffered again by the lowest layers of the library. + * + * The function #H5Pset_fapl_sec2 sets the file access properties to use the POSIX driver. See the + * example below. + * + * <em>Using the POSIX, aka SEC2, driver</em> + * \code + * herr_t H5Pset_fapl_sec2 (hid_t fapl_id) + * \endcode + * + * Any previously-defined driver properties are erased from the property list. + * + * Additional parameters may be added to this function in the future. Since there are no additional + * variable settings associated with the POSIX driver, there is no H5Pget_fapl_sec2 function. + * + * \subsubsection subsubsec_file_alternate_drivers_direct The Direct Driver + * The Direct driver, #H5FD_DIRECT, functions like the POSIX driver except that data is written to + * or read from the file synchronously without being cached by the system. + * + * The functions #H5Pset_fapl_direct and #H5Pget_fapl_direct are used to manage file access properties. + * See the example below. + * + * <em>Using the Direct driver</em> + * \code + * herr_t H5Pset_fapl_direct(hid_t fapl_id, size_t alignment, size_t block_size, size_t cbuf_size) + * herr_t H5Pget_fapl_direct(hid_t fapl_id, size_t *alignment, size_t *block_size, size_t *cbuf_size) + * \endcode + * + * #H5Pset_fapl_direct sets the file access properties to use the Direct driver; any previously defined + * driver properties are erased from the property list. #H5Pget_fapl_direct retrieves the file access + * properties used with the Direct driver. fapl_id is the file access property list identifier. + * alignment is the memory alignment boundary. block_size is the file system block size. + * cbuf_size is the copy buffer size. + * + * Additional parameters may be added to this function in the future. + * + * \subsubsection subsubsec_file_alternate_drivers_log The Log Driver + * The Log driver, #H5FD_LOG, is designed for situations where it is necessary to log file access + * activity. + * + * The function #H5Pset_fapl_log is used to manage logging properties. See the example below. + * + * <em>Logging file access</em> + * \code + * herr_t H5Pset_fapl_log (hid_t fapl_id, const char *logfile, unsigned int flags, size_t buf_size) + * \endcode + * + * #H5Pset_fapl_log sets the file access property list to use the Log driver. File access characteristics + * are identical to access via the POSIX driver. Any previously defined driver properties are erased + * from the property list. + * + * Log records are written to the file logfile. + * + * The logging levels set with the verbosity parameter are shown in the table below. + * + * <table> + * <caption>Logging levels</caption> + * <tr> + * <th>Level</th> + * <th>Comments</th> + * </tr> + * <tr> + * <td>0</td> + * <td>Performs no logging.</td> + * </tr> + * <tr> + * <td>1</td> + * <td>Records where writes and reads occur in the file.</td> + * </tr> + * <tr> + * <td>2</td> + * <td>Records where writes and reads occur in the file and what kind of data is written + * at each location. This includes raw data or any of several types of metadata + * (object headers, superblock, B-tree data, local headers, or global headers).</td> + * </tr> + * </table> + * + * There is no H5Pget_fapl_log function. + * + * Additional parameters may be added to this function in the future. + * + * \subsubsection subsubsec_file_alternate_drivers_win The Windows Driver + * The Windows driver, #H5FD_WINDOWS, was modified in HDF5-1.8.8 to be a wrapper of the + * POSIX driver, #H5FD_SEC2. In other words, if the Windows drivers is used, any file I/O will + * instead use the functionality of the POSIX driver. This change should be transparent to all user + * applications. The Windows driver used to be the default driver for Windows systems. The + * POSIX driver is now the default. + * + * The function #H5Pset_fapl_windows sets the file access properties to use the Windows driver. + * See the example below. + * + * <em>Using the Windows driver</em> + * \code + * herr_t H5Pset_fapl_windows (hid_t fapl_id) + * \endcode + * + * Any previously-defined driver properties are erased from the property list. + * + * Additional parameters may be added to this function in the future. Since there are no additional + * variable settings associated with the POSIX driver, there is no H5Pget_fapl_windows function. + * + * \subsubsection subsubsec_file_alternate_drivers_stdio The STDIO Driver + * The STDIO driver, #H5FD_STDIO, accesses permanent files in a local file system like the + * POSIX driver does. The STDIO driver also has an additional layer of buffering beneath the + * HDF5 Library. + * + * The function #H5Pset_fapl_stdio sets the file access properties to use the STDIO driver. See the + * example below. + * + * <em>Using the STDIO driver</em> + * \code + * herr_t H5Pset_fapl_stdio (hid_t fapl_id) + * \endcode + * + * Any previously defined driver properties are erased from the property list. + * + * Additional parameters may be added to this function in the future. Since there are no additional + * variable settings associated with the STDIO driver, there is no H5Pget_fapl_stdio function. + * + * \subsubsection subsubsec_file_alternate_drivers_mem The Memory (aka Core) Driver + * There are several situations in which it is reasonable, sometimes even required, to maintain a file + * entirely in system memory. You might want to do so if, for example, either of the following + * conditions apply: + * <ul><li>Performance requirements are so stringent that disk latency is a limiting factor</li> + * <li>You are working with small, temporary files that will not be retained and, thus, + * need not be written to storage media</li></ul> + * + * The Memory driver, #H5FD_CORE, provides a mechanism for creating and managing such in memory files. + * The functions #H5Pset_fapl_core and #H5Pget_fapl_core manage file access + * properties. See the example below. + * + * <em>Managing file access for in-memory files</em> + * \code + * herr_t H5Pset_fapl_core (hid_t access_properties, size_t block_size, hbool_t backing_store) + * herr_t H5Pget_fapl_core (hid_t access_properties, size_t *block_size), hbool_t *backing_store) + * \endcode + * + * #H5Pset_fapl_core sets the file access property list to use the Memory driver; any previously + * defined driver properties are erased from the property list. + * + * Memory for the file will always be allocated in units of the specified block_size. + * + * The backing_store Boolean flag is set when the in-memory file is created. + * backing_store indicates whether to write the file contents to disk when the file is closed. If + * backing_store is set to 1 (TRUE), the file contents are flushed to a file with the same name as the + * in-memory file when the file is closed or access to the file is terminated in memory. If + * backing_store is set to 0 (FALSE), the file is not saved. + * + * The application is allowed to open an existing file with the #H5FD_CORE driver. While using + * #H5Fopen to open an existing file, if backing_store is set to 1 and the flag for #H5Fopen is set to + * #H5F_ACC_RDWR, changes to the file contents will be saved to the file when the file is closed. + * If backing_store is set to 0 and the flag for #H5Fopen is set to #H5F_ACC_RDWR, changes to the + * file contents will be lost when the file is closed. If the flag for #H5Fopen is set to + * #H5F_ACC_RDONLY, no change to the file will be allowed either in memory or on file. + * + * If the file access property list is set to use the Memory driver, #H5Pget_fapl_core will return + * block_size and backing_store with the relevant file access property settings. + * + * Note the following important points regarding in-memory files: + * <ul><li>Local temporary files are created and accessed directly from memory without ever + * being written to disk</li> + * <li>Total file size must not exceed the available virtual memory</li> + * <li>Only one HDF5 file identifier can be opened for the file, the identifier returned by + * #H5Fcreate or #H5Fopen</li> + * <li>The changes to the file will be discarded when access is terminated unless + * backing_store is set to 1</li></ul> + * + * Additional parameters may be added to these functions in the future. + * + * @see <a href="https://portal.hdfgroup.org/display/HDF5/HDF5+File+Image+Operations"> + * HDF5 File Image Operations</a> + * section for information on more advanced usage of the Memory file driver, and + * @see <a href="http://www.hdfgroup.org/HDF5/doc/Advanced/ModifiedRegionWrites/ModifiedRegionWrites.pdf"> + * Modified Region Writes</a> + * section for information on how to set write operations so that only modified regions are written + * to storage. + * + * \subsubsection subsubsec_file_alternate_drivers_family The Family Driver + * HDF5 files can become quite large, and this can create problems on systems that do not support + * files larger than 2 gigabytes. The HDF5 file family mechanism is designed to solve the problems + * this creates by splitting the HDF5 file address space across several smaller files. This structure + * does not affect how metadata and raw data are stored: they are mixed in the address space just as + * they would be in a single, contiguous file. + * + * HDF5 applications access a family of files via the Family driver, #H5FD_FAMILY. The + * functions #H5Pset_fapl_family and #H5Pget_fapl_family are used to manage file family + * properties. See the example below. + * + * <em>Managing file family properties</em> + * \code + * herr_t H5Pset_fapl_family (hid_t fapl_id, + * hsize_t memb_size, hid_t member_properties) + * herr_t H5Pget_fapl_family (hid_t fapl_id, + * hsize_t *memb_size, hid_t *member_properties) + * \endcode + * + * Each member of the family is the same logical size though the size and disk storage reported by + * file system listing tools may be substantially smaller. Examples of file system listing tools are + * \code + * ls -l + * \endcode + * on a Unix system or the detailed folder listing on an Apple or Microsoft Windows + * system. The name passed to #H5Fcreate or #H5Fopen should include a printf(3c)-style integer + * format specifier which will be replaced with the family member number. The first family + * member is numbered zero (0). + * + * #H5Pset_fapl_family sets the access properties to use the Family driver; any previously defined + * driver properties are erased from the property list. member_properties will serve as the file + * access property list for each member of the file family. memb_size specifies the logical size, in + * bytes, of each family member. memb_size is used only when creating a new file or truncating an + * existing file; otherwise the member size is determined by the size of the first member of the + * family being opened. Note: If the size of the off_t type is four bytes, the maximum family + * member size is usually 2^31-1 because the byte at offset 2,147,483,647 is generally inaccessible. + * + * #H5Pget_fapl_family is used to retrieve file family properties. If the file access property list is set + * to use the Family driver, member_properties will be returned with a pointer to a copy of the + * appropriate member access property list. If memb_size is non-null, it will contain the logical + * size, in bytes, of family members. + * + * Additional parameters may be added to these functions in the future. + * + * <h4>Unix Tools and an HDF5 Utility</h4> + * It occasionally becomes necessary to repartition a file family. A command-line utility for this + * purpose, h5repart, is distributed with the HDF5 library. + * + * \code + * h5repart [-v] [-b block_size[suffix]] [-m member_size[suffix]] source destination + * \endcode + * + * h5repart repartitions an HDF5 file by copying the source file or file family to the destination file + * or file family, preserving holes in the underlying UNIX files. Families are used for the source + * and/or destination if the name includes a printf-style integer format such as %d. The -v switch + * prints input and output file names on the standard error stream for progress monitoring, -b sets + * the I/O block size (the default is 1KB), and -m sets the output member size if the destination is a + * family name (the default is 1GB). block_size and member_size may be suffixed with the letters + * g, m, or k for GB, MB, or KB respectively. + * + * The h5repart utility is described on the Tools page of the HDF5 Reference Manual. + * + * An existing HDF5 file can be split into a family of files by running the file through split(1) on a + * UNIX system and numbering the output files. However, the HDF5 Library is lazy about + * extending the size of family members, so a valid file cannot generally be created by + * concatenation of the family members. + * + * Splitting the file and rejoining the segments by concatenation (split(1) and cat(1) on UNIX + * systems) does not generate files with holes; holes are preserved only through the use of h5repart. + * + * \subsubsection subsubsec_file_alternate_drivers_multi The Multi Driver + * In some circumstances, it is useful to separate metadata from raw data and some types of + * metadata from other types of metadata. Situations that would benefit from use of the Multi driver + * include the following: + * <ul><li>In networked situations where the small metadata files can be kept on local disks but + * larger raw data files must be stored on remote media</li> + * <li>In cases where the raw data is extremely large</li> + * <li>In situations requiring frequent access to metadata held in RAM while the raw data + * can be efficiently held on disk</li></ul> + * + * In either case, access to the metadata is substantially easier with the smaller, and possibly more + * localized, metadata files. This often results in improved application performance. + * + * The Multi driver, #H5FD_MULTI, provides a mechanism for segregating raw data and different + * types of metadata into multiple files. The functions #H5Pset_fapl_multi and + * #H5Pget_fapl_multi are used to manage access properties for these multiple files. See the example + * below. + * + * <em>Managing access properties for multiple files</em> + * \code + * herr_t H5Pset_fapl_multi (hid_t fapl_id, const H5FD_mem_t *memb_map, const hid_t *memb_fapl, + * const char * const *memb_name, const haddr_t *memb_addr, + * hbool_t relax) + * herr_t H5Pget_fapl_multi (hid_t fapl_id, const H5FD_mem_t *memb_map, const hid_t *memb_fapl, + * const char **memb_name, const haddr_t *memb_addr, hbool_t *relax) + * \endcode + * + * #H5Pset_fapl_multi sets the file access properties to use the Multi driver; any previously defined + * driver properties are erased from the property list. With the Multi driver invoked, the application + * will provide a base name to #H5Fopen or #H5Fcreate. The files will be named by that base name as + * modified by the rule indicated in memb_name. File access will be governed by the file access + * property list memb_properties. + * + * See #H5Pset_fapl_multi and #H5Pget_fapl_multi in the HDF5 Reference Manual for descriptions + * of these functions and their usage. + * + * Additional parameters may be added to these functions in the future. + * + * \subsubsection subsubsec_file_alternate_drivers_split The Split Driver + * The Split driver, H5FD_SPLIT, is a limited case of the Multi driver where only two files are + * created. One file holds metadata, and the other file holds raw data. + * The function #H5Pset_fapl_split is used to manage Split file access properties. See the example + * below. + * + * <em>Managing access properties for split files</em> + * \code + * herr_t H5Pset_fapl_split (hid_t access_properties, const char *meta_extension, + * hid_t meta_properties,const char *raw_extension, hid_t raw_properties) + * \endcode + * + * #H5Pset_fapl_split sets the file access properties to use the Split driver; any previously defined + * driver properties are erased from the property list. + * + * With the Split driver invoked, the application will provide a base file name such as file_name to + * #H5Fcreate or #H5Fopen. The metadata and raw data files in storage will then be named + * file_name.meta_extension and file_name.raw_extension, respectively. For example, if + * meta_extension is defined as .meta and raw_extension is defined as .raw, the final filenames will + * be file_name.meta and file_name.raw. + * + * Each file can have its own file access property list. This allows the creative use of other lowlevel + * file drivers. For instance, the metadata file can be held in RAM and accessed via the + * Memory driver while the raw data file is stored on disk and accessed via the POSIX driver. + * Metadata file access will be governed by the file access property list in meta_properties. Raw + * data file access will be governed by the file access property list in raw_properties. + * + * Additional parameters may be added to these functions in the future. Since there are no + * additional variable settings associated with the Split driver, there is no H5Pget_fapl_split + * function. + * + * \subsubsection subsubsec_file_alternate_drivers_par The Parallel Driver + * Parallel environments require a parallel low-level driver. HDF5’s default driver for parallel + * systems is called the Parallel driver, #H5FD_MPIO. This driver uses the MPI standard for both + * communication and file I/O. + * + * The functions #H5Pset_fapl_mpio and #H5Pget_fapl_mpio are used to manage file access + * properties for the #H5FD_MPIO driver. See the example below. + * + * <em>Managing parallel file access properties</em> + * \code + * herr_t H5Pset_fapl_mpio (hid_t fapl_id, MPI_Comm comm, MPI_info info) + * herr_t H5Pget_fapl_mpio (hid_t fapl_id, MPI_Comm *comm, MPI_info *info) + * \endcode + * + * The file access properties managed by #H5Pset_fapl_mpio and retrieved by + * #H5Pget_fapl_mpio are the MPI communicator, comm, and the MPI info object, info. comm and + * info are used for file open. info is an information object much like an HDF5 property list. Both + * are defined in MPI_FILE_OPEN of MPI-2. + * + * The communicator and the info object are saved in the file access property list fapl_id. + * fapl_id can then be passed to MPI_FILE_OPEN to create and/or open the file. + * + * #H5Pset_fapl_mpio and #H5Pget_fapl_mpio are available only in the parallel HDF5 Library and + * are not collective functions. The Parallel driver is available only in the parallel HDF5 Library. + * + * Additional parameters may be added to these functions in the future. + * + * \subsection subsec_file_examples Code Examples for Opening and Closing Files + * \subsubsection subsubsec_file_examples_trunc Example Using the H5F_ACC_TRUNC Flag + * The following example uses the #H5F_ACC_TRUNC flag when it creates a new file. The default + * file creation and file access properties are also used. Using #H5F_ACC_TRUNC means the + * function will look for an existing file with the name specified by the function. In this case, that + * name is FILE. If the function does not find an existing file, it will create one. If it does find an + * existing file, it will empty the file in preparation for a new set of data. The identifier for the + * "new" file will be passed back to the application program. + * For more information, @see @ref subsec_file_access_modes. + * + * <em>Creating a file with default creation and access properties</em> + * \code + * hid_t file; // identifier + * + * // Create a new file using H5F_ACC_TRUNC access, default + * // file creation properties, and default file access + * // properties. + * file = H5Fcreate(FILE, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); + * + * // Close the file. + * status = H5Fclose(file); + * \endcode + * + * \subsubsection subsubsec_file_examples_props Example with the File Creation Property List + * The example below shows how to create a file with 64-bit object offsets and lengths. + * + * <em>Creating a file with 64-bit offsets</em> + * \code + * hid_t create_plist; + * hid_t file_id; + * + * create_plist = H5Pcreate(H5P_FILE_CREATE); + * H5Pset_sizes(create_plist, 8, 8); + * file_id = H5Fcreate(“test.h5”, H5F_ACC_TRUNC, create_plist, H5P_DEFAULT); + * . + * . + * . + * + * H5Fclose(file_id); + * \endcode + * + * \subsubsection subsubsec_file_examples_access Example with the File Access Property List + * This example shows how to open an existing file for independent datasets access by MPI parallel + * I/O: + * + * <em>Opening an existing file for parallel I/O</em> + * \code + * hid_t access_plist; + * hid_t file_id; + * + * access_plist = H5Pcreate(H5P_FILE_ACCESS); + * H5Pset_fapl_mpi(access_plist, MPI_COMM_WORLD, MPI_INFO_NULL); + * + * // H5Fopen must be called collectively + * file_id = H5Fopen(“test.h5”, H5F_ACC_RDWR, access_plist); + * . + * . + * . + * + * // H5Fclose must be called collectively + * H5Fclose(file_id); + * \endcode + * + * \subsection subsec_file_multiple Working with Multiple HDF5 Files + * Multiple HDF5 files can be associated so that the files can be worked with as though all the + * information is in a single HDF5 file. A temporary association can be set up by means of the + * #H5Fmount function. A permanent association can be set up by means of the external link + * function #H5Lcreate_external. + * + * The purpose of this section is to describe what happens when the #H5Fmount function is used to + * mount one file on another. + * + * When a file is mounted on another, the mounted file is mounted at a group, and the root group of + * the mounted file takes the place of that group until the mounted file is unmounted or until the + * files are closed. + * + * The figure below shows two files before one is mounted on the other. File1 has two groups and + * three datasets. The group that is the target of the A link has links, Z and Y, to two of the datasets. + * The group that is the target of the B link has a link, W, to the other dataset. File2 has three + * groups and three datasets. The groups in File2 are the targets of the AA, BB, and CC links. The + * datasets in File2 are the targets of the ZZ, YY, and WW links. + * + * <table> + * <tr> + * <td> + * \image html Files_fig3.gif "Two separate files" + * </td> + * </tr> + * </table> + * + * The figure below shows the two files after File2 has been mounted File1 at the group that is the + * target of the B link. + * + * <table> + * <tr> + * <td> + * \image html Files_fig4.gif "File2 mounted on File1" + * </td> + * </tr> + * </table> + * + * Note: In the figure above, the dataset that is the target of the W link is not shown. That dataset is + * masked by the mounted file. + * + * If a file is mounted on a group that has members, those members are hidden until the mounted + * file is unmounted. There are two ways around this if you need to work with a group member. + * One is to mount the file on an empty group. Another is to open the group member before you + * mount the file. Opening the group member will return an identifier that you can use to locate the + * group member. + * + * The example below shows how #H5Fmount might be used to mount File2 onto File1. + * + * <em>Using H5Fmount</em> + * \code + * status = H5Fmount(loc_id, "/B", child_id, plist_id) + * \endcode + * + * Note: In the code example above, loc_id is the file identifier for File1, /B is the link path to the + * group where File2 is mounted, child_id is the file identifier for File2, and plist_id is a property + * list identifier. + * For more information, @see @ref sec_group. + * + * See the entries for #H5Fmount, #H5Funmount, and #H5Lcreate_external in the HDF5 Reference Manual. + * + * Previous Chapter \ref sec_program - Next Chapter \ref sec_group + * + */ + +/** + * \defgroup H5F Files (H5F) * * Use the functions in this module to manage HDF5 files. * |