Plugin test cleanup (#1479)

* Autotools plugin test cleanup

* Combines filter, VFD, and VOL plugin tests
* Adds VFD plugin tests to the Autotools
* Implements a uniform shell script naming scheme in test/

* codespell fix

* Changes after code review

1 files changed, 0 insertions, 238 deletions

diff --git a/test/testflushrefresh.sh.in b/test/testflushrefresh.sh.in
deleted file mode 100644
index 209d370..0000000
--- a/test/testflushrefresh.sh.in
+++ /dev/null
@@ -1,238 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the COPYING file, which can be found at the root of the source code
-# distribution tree, or in https://www.hdfgroup.org/licenses.
-# If you do not have access to either file, you may request a copy from
-# help@hdfgroup.org.
-#
-#
-# Test script for the flush/evict single objects feature.
-#
-# This test file doesn't actually perform any tests, rather, it acts
-# as a process manager for the 'flushrefresh' test file, which is where
-# the tests are actually housed. The reason this script exists is because
-# the verification of this feature needs to occur in separate processes
-# from the one in which the file is being manipulated in. (i.e., we have
-# a single writer process, and various reader processes spawning off
-# and doing the verification that individual objects are being
-# correctly flushed).
-#
-# Programmer:
-#   Mike McGreevy
-#   Tuesday, July 20, 2010
-
-###############################################################################
-## test variables
-###############################################################################
-
-# Number of errors encountered during test run.
-nerrors=0
-
-# Set up a function to check the current time since the epoch - ideally, we'd
-# like to use Perl. If it wasn't detected by configure, then use date, though
-# this is less portable and might cause problems on machines that don't
-# recognize the +%s option (like Solaris).
-#
-# Note that PERL will resolve to true or false, not a path.
-PERL=@PERL@
-if test -n "$PERL"; then
-    TimeStamp()
-    {
-        time=`perl -e 'print int(time)'`
-        echo "$time"
-    }
-else
-    TimeStamp()
-    {
-        time=`date +%s`
-        echo "$time"
-    }
-fi
-
-###############################################################################
-## Main
-###############################################################################
-srcdir=@srcdir@
-utils_testdir=@abs_top_builddir@/@H5_UTILS_TEST_BUILDDIR@
-testdir=@abs_top_builddir@/@H5_TEST_BUILDDIR@
-
-# Check to see if the VFD specified by the HDF5_DRIVER environment variable
-# supports SWMR.
-$utils_testdir/swmr_check_compat_vfd
-rc=$?
-if [ $rc -ne 0 ] ; then
-    echo
-    echo "The VFD specified by the HDF5_DRIVER environment variable"
-    echo "does not support SWMR."
-    echo
-    echo "flush/refresh tests skipped"
-    echo
-    exit 0
-fi
-
-# HDF5 has several tests that create and delete signal files to communicate
-# between processes, and it seems that even though the names of the files are
-# different, occasionally the wrong file is deleted, interrupting the flow of
-# the test.  Running each of these tests in its own directory should eliminate
-# the problem.
-mkdir -p flushrefresh_test
-cp $testdir/flushrefresh flushrefresh_test
-
-# With the --disable-shared option, flushrefresh is built in the test directory,
-# otherwise it is in test/.libs with a wrapper script named flushrefresh in
-# the test directory.  test/flushrefresh should always be copied,
-# .libs/flushrefresh should be copied only if it exists.
-if [ -f .libs/flushrefresh ]; then
-    mkdir -p flushrefresh_test/.libs
-    for FILE in .libs/flushrefresh*; do
-        case "$FILE" in
-            *.o) continue ;;    ## don't copy the .o files
-        esac
-        if test -f "$FILE" ; then
-            cp $FILE flushrefresh_test/.libs
-        fi
-    done
-fi
-cd flushrefresh_test
-
-# =================================================
-# Set up/initialize some variables to be used later
-# =================================================
-testfile=flushrefresh.h5
-startsignal=flushrefresh_VERIFICATION_START
-endsignal=flushrefresh_VERIFICATION_DONE
-timeout_length=300
-timedout=0
-verification_done=0
-if [ -e $testfile ]; then
-    rm $testfile
-fi
-
-# ========================
-# Launch the Test Program.
-# ========================
-$testdir/flushrefresh &
-pid_main=$!
-
-# =======================================
-# Run flush verification on test program.
-# =======================================
-
-until [ $verification_done -eq 1 ]; do
-
-  # Wait for signal from test program that verification routine can run.
-  before=`TimeStamp`
-  until [ -s $startsignal ]; do
-    after=`TimeStamp`
-    timediff=`expr $after - $before`
-    if [ $timediff -gt $timeout_length ]; then
-        nerrors=`expr $nerrors + 1`
-        timedout=1
-        break
-    fi
-  done
-
-  # Check to see if we timed out looking for the signal before continuing.
-  if [ $timedout -gt 0 ]; then
-    echo "timed out waiting for signal from test program (flush)."
-    break
-  fi
-
-  # Read in test routine parameters from signal file, then delete signal file.
-  param1=`head -1 $startsignal`
-  param2=`tail -1 $startsignal`
-  rm $startsignal
-
-  # Check if we're done with verifications, otherwise run the specified verification.
-  if [ "$param1" = "VERIFICATION_DONE" ]; then
-    verification_done=1
-    echo "all flush verification complete" > $endsignal
-  else
-    $testdir/flushrefresh $param1 $param2
-
-    # Check for core dump
-    if [ $? -gt 0 ]; then
-        nerrors=`expr $nerrors + 1`
-    fi
-
-    echo "verification flush process done" > $endsignal
-  fi
-
-done
-
-# =========================================
-# Run refresh verification on test program.
-# =========================================
-if [ $timedout -eq 0 ]; then
-  until [ $verification_done -eq 2 ]; do
-
-    # Wait for signal from test program that verification routine can run.
-    before=`TimeStamp`
-    until [ -s $startsignal ]; do
-      after=`TimeStamp`
-      timediff=`expr $after - $before`
-      if [ $timediff -gt $timeout_length ]; then
-          nerrors=`expr $nerrors + 1`
-          timedout=1
-          break
-      fi
-    done
-
-    # Check to see if we timed out looking for the signal before continuing.
-    if [ $timedout -gt 0 ]; then
-      echo "timed out waiting for signal from test program (refresh)."
-      break
-    fi
-
-    # Read in test routine parameter from signal file, then delete signal file.
-    param1=`head -n 1 $startsignal`
-    rm $startsignal
-
-    # Check if we're done with verifications, otherwise run the specified verification.
-    if [ "$param1" = "VERIFICATION_DONE" ]; then
-      verification_done=2
-      echo "all refresh verification complete" > $endsignal
-    else
-      $testdir/flushrefresh $param1
-
-      # Check for core dump
-      if [ $? -gt 0 ]; then
-          nerrors=`expr $nerrors + 1`
-      fi
-
-      echo "refresh verifiction process done" > $endsignal
-    fi
-
-  done
-fi
-
-# ============================================
-# Wait for main to finish up, and end testing.
-# ============================================
-wait $pid_main
-if test $? -ne 0; then
-    echo flushrefresh had error
-    nerrors=`expr $nerrors + 1`
-fi
-
-###############################################################################
-## Report and exit
-###############################################################################
-
-if test $nerrors -eq 0 ; then
-    echo "flush/refresh objects tests passed."
-    if test -z "$HDF5_NOCLEANUP"; then
-        # delete the test directory
-        rm -rf flushrefresh_test
-    fi
-    exit 0
-else
-    echo "flush/refresh objects tests failed with $nerrors errors."
-    exit 1
-fi