Plugin test cleanup (#1479)

* Autotools plugin test cleanup

* Combines filter, VFD, and VOL plugin tests
* Adds VFD plugin tests to the Autotools
* Implements a uniform shell script naming scheme in test/

* codespell fix

* Changes after code review

1 files changed, 0 insertions, 519 deletions

diff --git a/test/testswmr.pwsh.in b/test/testswmr.pwsh.in
deleted file mode 100644
index de7a57a..0000000
--- a/test/testswmr.pwsh.in
+++ /dev/null
@@ -1,519 +0,0 @@
-# Copyright by The HDF Group.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the COPYING file, which can be found at the root of the source code
-# distribution tree, or in https://www.hdfgroup.org/licenses.
-# If you do not have access to either file, you may request a copy from
-# help@hdfgroup.org.
-#
-# Tests for the swmr feature.
-
-$srcdir  = '@srcdir@'
-$utils_testdir=@H5_UTILS_TEST_BUILDDIR@
-$testdir=@H5_TEST_BUILDDIR@
-
-###############################################################################
-## test parameters
-###############################################################################
-
-$Nreaders     = 5          # number of readers to launch
-$Nrdrs_spa    = 3          # number of sparse readers to launch
-$Nrecords     = 200000     # number of records to write
-$Nrecs_rem    = 40000      # number of times to shrink
-$Nrecs_spa    = 20000      # number of records to write in the sparse test
-$Nsecs_add    = 5          # number of seconds per read interval
-$Nsecs_rem    = 3          # number of seconds per read interval
-$Nsecs_addrem = 8          # number of seconds per read interval
-$nerrors      = 0
-
-###############################################################################
-## definitions for message file to coordinate test runs
-###############################################################################
-$WRITER_MESSAGE = 'SWMR_WRITER_MESSAGE'    # The message file created by writer that the open is complete
-                                           # This should be the same as the define in "test/swmr_common.h"
-$MESSAGE_TIMEOUT = 300                     # Message timeout length in secs
-                                           # This should be the same as the define in "test/h5test.h"
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-#
-function Test-WithSpaces {
-   $SPACES='                                                               '
-   #Write-Output  "Testing $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# To wait for the writer message file or till the maximum # of seconds is reached
-# $Message is the message file to wait for
-# This performs similar function as the routine h5_wait_message() in test/h5test.c
-function Wait-Message {
-    [CmdletBinding()]
-    param (
-        [Parameter(Mandatory, ValueFromPipeline)]
-        [string]$TestPath,                             # Get the path of the message file to wait for
-        [Parameter(Mandatory, ValueFromPipeline)]
-        [string]$Message                              # Get the name of the message file to wait for
-    )
-
-    PROCESS {
-        $message = Join-Path -Path $TestPath -ChildPath $Message
-        $t0 = Get-Date                                # Get current time
-        $t1 = $t0
-        $difft = New-Timespan -Start $t0 -End $t1     # Initialize the time difference
-        $mexist = 0                                   # Indicate whether the message file is found
-        while ($difft.TotalSeconds -lt $MESSAGE_TIMEOUT) {    # Loop till message times out
-            $t1 = Get-Date                                    # Get current time in seconds
-            $difft = New-Timespan -Start $t0 -End $t1         # Calculate the time difference
-            #Write-Output "Check for $message : time=$difft"
-            if ([System.IO.File]::Exists($message)) {         # If message file is found:
-                $mexist = 1                                   #       indicate the message file is found
-                Remove-Item $message                          #       remove the message file
-                break                                         #       get out of the while loop
-            }
-        }
-        if ($mexist -eq 0) {
-            # Issue warning that the writer message file is not found, continue with launching the reader(s)
-            Write-Warning -Message "$WRITER_MESSAGE is not found after waiting $MESSAGE_TIMEOUT seconds"
-        }
-        else {
-            Write-Output "$WRITER_MESSAGE is found"
-        }
-    }
-}
-
-###############################################################################
-## Main
-##
-## Modifications:
-##   Vailin Choi; July 2013
-##     Add waiting of message file before launching the reader(s).
-##     Due to the implementation of file locking, coordination
-##     is needed in file opening for the writer/reader tests
-##     to proceed as expected.
-##
-###############################################################################
-
-# Check to see if the VFD specified by the HDF5_DRIVER environment variable
-# supports SWMR.
-$testprog = Join-Path -Path $utils_testdir -ChildPath swmr_check_compat_vfd.exe
-$rp = Start-Process -FilePath $testprog -PassThru -Wait -NoNewWindow
-if ($rp.ExitCode -ne 0) {
-    Write-Output ""
-    Write-Output "The VFD specified by the HDF5_DRIVER environment variable"
-    Write-Output "does not support SWMR."
-    Write-Output ""
-    Write-Output "SWMR acceptance tests skipped"
-    Write-Output ""
-    exit 0
-}
-
-Set-Location -Path swmr_test
-$testdir = Join-Path -Path $testdir -ChildPath swmr_test
-
-# Loop over index types
-$IndexTypeLoop = '-i ea', '-i b2'
-foreach ($index_type in $IndexTypeLoop) {
-    # Try with and without compression
-    $CompressLoop = '', '-c 5'
-    foreach ($compress in $CompressLoop) {
-        Write-Output ""
-        Write-Output "*******************************************************************************"
-        Write-Output "** Loop testing parameters: $index_type $compress"
-        Write-Output "*******************************************************************************"
-        Write-Output ""
-        Write-Output ""
-        Write-Output "###############################################################################"
-        Write-Output "## Generator test"
-        Write-Output "###############################################################################"
-        # Launch the Generator without SWMR_WRITE
-        Write-Output "launch the swmr_generator"
-        $rp = Start-Process -FilePath $testdir/swmr_generator.exe -NoNewWindow -ArgumentList "$compress $index_type" -PassThru -Wait
-        if ($rp.ExitCode -ne 0) {
-            Write-Warning "generator had error"
-            $nerrors += 1
-        }
-
-        # Launch the Generator with SWMR_WRITE
-        Write-Output "launch the swmr_generator with SWMR_WRITE"
-        $rp = Start-Process -FilePath $testdir/swmr_generator.exe -NoNewWindow -ArgumentList "-s $compress $index_type" -PassThru -Wait
-        if ($rp.ExitCode -ne 0) {
-            Write-Warning "generator had error"
-            $nerrors += 1
-        }
-
-        # Check for error and exit if one occurred
-        #Write-Output "nerrors=$nerrors"
-        if ($nerrors -ne 0) {
-            Write-Warning "SWMR tests failed with $nerrors errors."
-            exit 1
-        }
-
-        Write-Output ""
-        Write-Output "###############################################################################"
-        Write-Output "## Use H5Fstart_swmr_write() to enable SWMR writing mode"
-        Write-Output "###############################################################################"
-
-        # Remove any possible writer message file before launching writer
-        if ([System.IO.File]::Exists($WRITER_MESSAGE)) {                # If message file is found
-            Remove-Item $WRITER_MESSAGE
-        }
-        #
-        # Launch the Writer
-        Write-Output "launch the swmr_start_writer"
-        $seed = "" # Put -r <random seed> command here
-        $rp = Start-Process -FilePath $testdir/swmr_start_write.exe -NoNewWindow -PassThru -ArgumentList "$compress $index_type $Nrecords $seed" 2>&1 |tee swmr_writer.out
-        $pid_writer = $rp.id
-        #Write-Output "pid_writer=$pid_writer"
-
-        # Wait for message from writer process before starting reader(s)
-        Wait-Message $testdir $WRITER_MESSAGE
-
-        #
-        # Launch the Readers
-        #declare -a seeds = (<seed1> <seed2> <seed3> ... )
-        Write-Output "launch $Nreaders swmr_readers"
-        $pid_readers = @()
-        $n = 0
-        while ($n -lt $Nreaders) {
-            #seed = "-r ${seeds[$n]}"
-            $seed = ""
-            $rp = Start-Process -FilePath $testdir/swmr_reader.exe -NoNewWindow -PassThru -ArgumentList "$Nsecs_add $seed" 2>&1 | tee swmr_reader.out.$n
-            $pid_readers +=  $rp.id
-            $n += 1
-        }
-        #Write-Output "pid_readers=$pid_readers"
-
-        # Collect exit code of the readers first because they usually finish
-        # before the writer.
-        foreach ($xpid in $pid_readers) {
-            #Write-Output "checked reader $xpid"
-            $result = Wait-Process -Id  $xpid
-            if ($result.ExitCode -ne 0) {
-                Write-Warning "reader had error"
-                $nerrors += 1
-            }
-        }
-
-        # Collect exit code of the writer
-        #Write-Output "checked writer $pid_writer"
-        $result = Wait-Process -Id  $pid_writer
-        if ($result.ExitCode -ne 0) {
-            Write-Warning "writer had error"
-            $nerrors += 1
-        }
-
-        # Check for error and exit if one occurred
-        #Write-Output "nerrors=$nerrors"
-        if ($nerrors -ne 0) {
-            Write-Warning "SWMR tests failed with $nerrors errors."
-            Write-Warning "(Writer and reader output preserved)"
-            exit 1
-        }
-
-        # Clean up output files
-        Remove-Item swmr_writer.out
-        Remove-Item swmr_reader.out.*
-
-        Write-Output ""
-        Write-Output "###############################################################################"
-        Write-Output "## Writer test - test expanding the dataset"
-        Write-Output "###############################################################################"
-
-        # Launch the Generator
-        Write-Output "launch the swmr_generator"
-        $rp = Start-Process -FilePath $testdir/swmr_generator.exe -NoNewWindow -PassThru -Wait -ArgumentList "-s $compress $index_type"
-        if ($rp.ExitCode -ne 0) {
-            Write-Warning "generator had error"
-            $nerrors += 1
-        }
-
-        # Remove any possible writer message file before launching writer
-        Remove-Item $WRITER_MESSAGE
-        #
-        # Launch the Writer
-        Write-Output "launch the swmr_writer"
-        $seed = "" # Put -r <random seed> command here
-        $rp = Start-Process -FilePath $testdir/swmr_writer.exe -NoNewWindow -PassThru -ArgumentList "-o $Nrecords $seed" 2>&1 |tee swmr_writer.out
-        $pid_writer = $rp.id
-        #Write-Output "pid_writer=$pid_writer"
-
-        # Wait for message from writer process before starting reader(s)
-        Wait-Message $testdir $WRITER_MESSAGE
-        #
-        # Launch the Readers
-        #declare -a seeds = (<seed1> <seed2> <seed3> ... )
-        Write-Output "launch $Nreaders swmr_readers"
-        $pid_readers = @()
-        $n = 0
-        while ($n -lt $Nreaders) {
-            #seed = "-r ${seeds[$n]}"
-            $seed = ""
-            $rp = Start-Process -FilePath $testdir/swmr_reader.exe -NoNewWindow -PassThru -ArgumentList "$Nsecs_add $seed" 2>&1 |tee swmr_reader.out.$n
-            $pid_readers += $rp.id
-            $n += 1
-        }
-        #Write-Output "pid_readers=$pid_readers"
-
-        # Collect exit code of the readers first because they usually finish
-        # before the writer.
-        foreach ($xpid in $pid_readers) {
-            #Write-Output "checked reader $xpid"
-            $result = Wait-Process -Id  $xpid
-            if ($result.ExitCode -ne 0) {
-                Write-Warning "reader had error"
-                $nerrors += 1
-            }
-        }
-
-        # Collect exit code of the writer
-        #Write-Output "checked writer $pid_writer"
-        $result = Wait-Process -Id  $pid_writer
-        if ($result.ExitCode -ne 0) {
-            Write-Warning "writer had error"
-            $nerrors += 1
-        }
-
-        # Check for error and exit if one occurred
-        #Write-Output "nerrors=$nerrors"
-        if ($nerrors -ne 0) {
-            Write-Warning "SWMR tests failed with $nerrors errors."
-            Write-Warning "(Writer and reader output preserved)"
-            exit 1
-        }
-
-        # Clean up output files
-        Remove-Item swmr_writer.out
-        Remove-Item swmr_reader.out.*
-
-        Write-Output ""
-        Write-Output "###############################################################################"
-        Write-Output "## Remove test - test shrinking the dataset"
-        Write-Output "###############################################################################"
-
-        # Remove any possible writer message file before launching writer
-        Remove-Item $WRITER_MESSAGE
-        # Launch the Remove Writer
-        Write-Output "launch the swmr_remove_writer"
-        $seed = "" # Put -r <random seed> command here
-        $rp = Start-Process -FilePath $testdir/swmr_remove_writer.exe -NoNewWindow -PassThru -ArgumentList "-o $Nrecs_rem $seed" 2>&1 |tee swmr_writer.out
-        $pid_writer = $rp.id
-        #Write-Output "pid_writer=$pid_writer"
-
-        # Wait for message from writer process before starting reader(s)
-        Wait-Message $testdir $WRITER_MESSAGE
-        #
-        # Launch the Remove Readers
-        #declare -a seeds = (<seed1> <seed2> <seed3> ... )
-        $n = 0
-        $pid_readers = @()
-        Write-Output "launch $Nreaders swmr_remove_readers"
-        while ($n -lt $Nreaders) {
-            #seed = "-r ${seeds[$n]}"
-            $seed = ""
-            $rp = Start-Process -FilePath $testdir/swmr_remove_reader.exe -NoNewWindow -PassThru -ArgumentList "$Nsecs_rem $seed" 2>&1 |tee swmr_reader.out.$n
-            $pid_readers += $rp.id
-            $n += 1
-        }
-        #Write-Output "pid_readers=$pid_readers"
-
-        # Collect exit code of the readers first because they usually finish
-        # before the writer.
-        foreach ($xpid in $pid_readers) {
-            #Write-Output "checked reader $xpid"
-            $result = Wait-Process -Id  $xpid
-            if ($result.ExitCode -ne 0) {
-                Write-Warning "reader had error"
-                $nerrors += 1
-            }
-        }
-
-        # Collect exit code of the writer
-        #Write-Output "checked writer $pid_writer"
-        $result = Wait-Process -Id  $pid_writer
-        if ($result.ExitCode -ne 0) {
-            Write-Warning "writer had error"
-            $nerrors += 1
-        }
-
-        # Check for error and exit if one occurred
-        #Write-Output "nerrors=$nerrors"
-        if ($nerrors -ne 0) {
-            Write-Warning "SWMR tests failed with $nerrors errors."
-            Write-Warning "(Writer and reader output preserved)"
-            exit 1
-        }
-
-        # Clean up output files
-        Remove-Item swmr_writer.out
-        Remove-Item swmr_reader.out.*
-
-        Write-Output ""
-        Write-Output "###############################################################################"
-        Write-Output "## Add/remove test - randomly grow or shrink the dataset"
-        Write-Output "###############################################################################"
-
-        # Launch the Generator
-        Write-Output "launch the swmr_generator"
-        $rp = Start-Process -FilePath $testdir/swmr_generator.exe -NoNewWindow-PassThru -Wait -ArgumentList "$compress $index_type"
-        if ($rp.ExitCode -ne 0) {
-            Write-Warning "generator had error"
-            $nerrors += 1
-        }
-
-        # Launch the Writer (not in parallel - just to rebuild the datasets)
-        Write-Output "launch the swmr_writer"
-        $seed = "" # Put -r <random seed> command here
-        $rp = Start-Process -FilePath $testdir/swmr_writer.exe -NoNewWindow -PassThru -Wait -ArgumentList "$Nrecords $seed"
-        if ($rp.ExitCode -ne 0) {
-            Write-Warning "writer had error"
-            $nerrors += 1
-        }
-
-        # Remove any possible writer message file before launching writer
-        Remove-Item $WRITER_MESSAGE
-        #
-        # Launch the Add/Remove Writer
-        Write-Output "launch the swmr_addrem_writer"
-        $seed = "" # Put -r <random seed> command here
-        $rp = Start-Process -FilePath $testdir/swmr_addrem_writer.exe -NoNewWindow -PassThru -ArgumentList "$Nrecords $seed" 2>&1 |tee swmr_writer.out
-        $pid_writer = $rp.id
-        #Write-Output "pid_writer=$pid_writer"
-
-        # Wait for message from writer process before starting reader(s)
-        Wait-Message $testdir $WRITER_MESSAGE
-        #
-        # Launch the Add/Remove Readers
-        #declare -a seeds = (<seed1> <seed2> <seed3> ... )
-        $n = 0
-        $pid_readers = @()
-        Write-Output "launch $Nreaders swmr_remove_readers"
-        while ($n -lt $Nreaders) {
-            #seed = "-r ${seeds[$n]}"
-            $seed = ""
-            $rp = Start-Process -FilePath $testdir/swmr_remove_reader.exe -NoNewWindow -PassThru -ArgumentList "$Nsecs_addrem $seed" 2>&1 |tee swmr_reader.out.$n
-            $pid_readers += $rp.id
-            $n += 1
-        }
-        #Write-Output "pid_readers=$pid_readers"
-
-        # Collect exit code of the readers first because they usually finish
-        # before the writer.
-        foreach ($xpid in $pid_readers) {
-            #Write-Output "checked reader $xpid"
-            $result = Wait-Process -Id  $xpid
-            if ($result.ExitCode -ne 0) {
-                Write-Warning "reader had error"
-                $nerrors += 1
-            }
-        }
-
-        # Collect exit code of the writer
-        #Write-Output "checked writer $pid_writer"
-        $result = Wait-Process -Id  $pid_writer
-        if ($result.ExitCode -ne 0) {
-            Write-Warning "writer had error"
-            $nerrors += 1
-        }
-
-        # Check for error and exit if one occurred
-        #Write-Output "nerrors=$nerrors"
-        if ($nerrors -ne 0) {
-            Write-Warning "SWMR tests failed with $nerrors errors."
-            Write-Warning "(Writer and reader output preserved)"
-            exit 1
-        }
-
-        # Clean up output files
-        Remove-Item swmr_writer.out
-        Remove-Item swmr_reader.out.*
-
-        Write-Output ""
-        Write-Output "###############################################################################"
-        Write-Output "## Sparse writer test - test writing to random locations in the dataset"
-        Write-Output "###############################################################################"
-
-        # Launch the Generator
-        # NOTE: Random seed is shared between readers and writers and is
-        #       created by the generator.
-        Write-Output "launch the swmr_generator"
-        $seed = "" # Put -r <random seed> command here
-        $rp = Start-Process -FilePath $testdir/swmr_generator.exe -NoNewWindow -PassThru -Wait -ArgumentList "$compress $index_type $seed"
-        if ($rp.ExitCode -ne 0) {
-            Write-Warning "generator had error"
-            $nerrors += 1
-        }
-
-        # Remove any possible writer message file before launching writer
-        Remove-Item $WRITER_MESSAGE
-        # Launch the Sparse writer
-        Write-Output "launch the swmr_sparse_writer"
-        $rp = Start-Process -FilePath $testdir/swmr_sparse_writer.exe -NoNewWindow -PassThru -ArgumentList "$Nrecs_spa" 2>&1 |tee swmr_writer.out
-        $pid_writer = $rp.Id
-        #Write-Output "pid_writer=$pid_writer"
-
-        # Wait for message from writer process before starting reader(s)
-        Wait-Message $testdir $WRITER_MESSAGE
-        #
-        # Launch the Sparse readers
-        $n = 0
-        $pid_readers = @()
-        Write-Output "launch $Nrdrs_spa swmr_sparse_readers"
-        while ($n -lt $Nrdrs_spa) {
-            # The sparse reader spits out a LOT of data so it's set to 'quiet'
-            $rp = Start-Process -FilePath $testdir/swmr_sparse_reader.exe -NoNewWindow -PassThru -ArgumentList "-q $Nrecs_spa" 2>&1 |tee swmr_reader.out.$n
-            $pid_readers += $rp.id
-            $n += 1
-        }
-        #Write-Output "pid_readers=$pid_readers"
-
-        # Collect exit code of the writer
-        #Write-Output "checked writer $pid_writer"
-        $result = Wait-Process -Id  $pid_writer
-        if ($result.ExitCode -ne 0) {
-            Write-Warning "writer had error"
-            $nerrors += 1
-        }
-
-        # Collect exit code of the readers
-        foreach ($xpid in $pid_readers) {
-            #Write-Output "checked reader $xpid"
-            $result = Wait-Process -Id  $xpid
-            if ($result.ExitCode -ne 0) {
-                Write-Warning "reader had error"
-                $nerrors += 1
-            }
-        }
-
-        # Check for error and exit if one occurred
-        #Write-Output "nerrors=$nerrors"
-        if ($nerrors -ne 0) {
-            Write-Warning "SWMR tests failed with $nerrors errors."
-            Write-Warning "(Writer and reader output preserved)"
-            exit 1
-        }
-
-        # Clean up output files
-        Remove-Item swmr_writer.out
-        Remove-Item swmr_reader.out.*
-    }
-}
-
-###############################################################################
-## Report and exit
-###############################################################################
-cd ..
-#Write-Output "nerrors=$nerrors"
-if ($nerrors -eq 0) {
-    Write-Output "SWMR tests passed."
-#    if test -z "$HDF5_NOCLEANUP"; then
-#        # delete the test directory
-#        Remove-Item swmr_test -Recurse
-#    fi
-    exit 0
-}
-else {
-    Write-Warning "SWMR tests failed with $nerrors errors."
-    exit 1
-}
-