Plugin test cleanup (#1479)

* Autotools plugin test cleanup

* Combines filter, VFD, and VOL plugin tests
* Adds VFD plugin tests to the Autotools
* Implements a uniform shell script naming scheme in test/

* codespell fix

* Changes after code review

1 files changed, 0 insertions, 233 deletions

diff --git a/test/testvdsswmr.sh.in b/test/testvdsswmr.sh.in
deleted file mode 100644
index 399fdef..0000000
--- a/test/testvdsswmr.sh.in
+++ /dev/null
@@ -1,233 +0,0 @@
-#! /bin/bash
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the COPYING file, which can be found at the root of the source code
-# distribution tree, or in https://www.hdfgroup.org/licenses.
-# If you do not have access to either file, you may request a copy from
-# help@hdfgroup.org.
-#
-# Tests for the swmr feature using virtual datasets.
-#
-# Created:
-#   Dana Robinson, November 2015
-
-srcdir=@srcdir@
-utils_testdir=@abs_top_builddir@/@H5_UTILS_TEST_BUILDDIR@
-testdir=@abs_top_builddir@/@H5_TEST_BUILDDIR@
-
-###############################################################################
-## test parameters
-###############################################################################
-
-Nwriters=6              # number of writers (1 per source dataset)
-Nreaders=5              # number of readers to launch
-nerrors=0
-
-###############################################################################
-## definitions for message file to coordinate test runs
-###############################################################################
-WRITER_MESSAGE=SWMR_WRITER_MESSAGE      # The message file created by writer that the open is complete
-                                        # This should be the same as the define in "test/swmr_common.h"
-MESSAGE_TIMEOUT=300                     # Message timeout length in secs
-                                        # This should be the same as the define in "test/h5test.h"
-
-###############################################################################
-## short hands and function definitions
-###############################################################################
-DPRINT=:                # Set to "echo Debug:" for debugging printing,
-                        # else ":" for noop.
-IFDEBUG=:               # Set to null to turn on debugging, else ":" for noop.
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-#
-TESTING() {
-   SPACES="                                                               "
-   echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# To wait for the writer message file or till the maximum # of seconds is reached
-# $1 is the message file to wait for
-# This performs similar function as the routine h5_wait_message() in test/h5test.c
-WAIT_MESSAGE() {
-    message=$1                                  # Get the name of the message file to wait for
-    t0=`date +%s`                               # Get current time in seconds
-    difft=0                                     # Initialize the time difference
-    mexist=0                                    # Indicate whether the message file is found
-    while [ $difft -lt $MESSAGE_TIMEOUT ] ;     # Loop till message times out
-    do
-        t1=`date +%s`                           # Get current time in seconds
-        difft=`expr $t1 - $t0`                  # Calculate the time difference
-        if [ -e $message ]; then                # If message file is found:
-            mexist=1                            #       indicate the message file is found
-            rm $message                         #       remove the message file
-            break                               #       get out of the while loop
-        fi
-    done;
-    if test $mexist -eq 0; then
-        # Issue warning that the writer message file is not found, continue with launching the reader(s)
-        echo warning: $WRITER_MESSAGE is not found after waiting $MESSAGE_TIMEOUT seconds
-    else
-        echo $WRITER_MESSAGE is found
-    fi
-}
-
-###############################################################################
-## Main
-###############################################################################
-
-# Check to see if the VFD specified by the HDF5_DRIVER environment variable
-# supports SWMR.
-$utils_testdir/swmr_check_compat_vfd
-rc=$?
-if [ $rc -ne 0 ] ; then
-    echo
-    echo "The VFD specified by the HDF5_DRIVER environment variable"
-    echo "does not support SWMR."
-    echo
-    echo "SWMR acceptance tests skipped"
-    echo
-    exit 0
-fi
-
-# Parse options (none accepted at this time)
-while [ $# -gt 0 ]; do
-    case "$1" in
-    *)  # unknown option
-        echo "$0: Unknown option ($1)"
-        exit 1
-        ;;
-    esac
-done
-
-# HDF5 has several tests that create and delete signal files to communicate
-# between processes, and it seems that even though the names of the files are
-# different, occasionally the wrong file is deleted, interrupting the flow of
-# the test.  Running each of these tests in its own directory should eliminate
-# the problem.
-mkdir vds_swmr_test
-for FILE in vds_swmr*; do
-    case "$FILE" in
-        *.o) continue ;;    ## don't copy the .o files
-    esac
-    if test -f "$FILE" ; then
-        cp $FILE vds_swmr_test
-    fi
-done
-
-# With the --disable-shared option, swmr program files are built in the test
-# directory, otherwise they are in test/.libs with a corresponding wrapper
-# script in the test directory.  The programs or wrapper scripts in test should
-# always be copied, swmr files in .libs should be copied only if they exists.
-if [ -f .libs/vds_swmr_writer ]; then
-    mkdir vds_swmr_test/.libs
-    for FILE in .libs/vds_swmr*; do
-        case "$FILE" in
-            *.o) continue ;;    ## don't copy the .o files
-        esac
-        if test -f "$FILE" ; then
-            cp $FILE vds_swmr_test/.libs
-        fi
-    done
-fi
-
-cd vds_swmr_test
-
-
-echo
-echo "###############################################################################"
-echo "## Basic VDS SWMR test - writing to a tiled plane"
-echo "###############################################################################"
-
-# Launch the file generator
-echo launch the generator
-$testdir/vds_swmr_gen
-if test $? -ne 0; then
-    echo generator had error
-    nerrors=`expr $nerrors + 1`
-fi
-
-# Check for error and exit if one occurred
-$DPRINT nerrors=$nerrors
-if test $nerrors -ne 0 ; then
-    echo "VDS SWMR tests failed with $nerrors errors."
-    exit 1
-fi
-
-# Launch the writers
-echo "launch the $Nwriters SWMR VDS writers (1 per source)"
-pid_writers=""
-n=0
-while [ $n -lt $Nwriters ]; do
-    $testdir/vds_swmr_writer $n &
-    pid_writers="$pid_writers $!"
-    n=`expr $n + 1`
-done
-$DPRINT pid_writers=$pid_writers
-$IFDEBUG ps
-
-# Sleep to ensure that the writers have started
-sleep 3
-
-# Launch the readers
-echo launch $Nreaders SWMR readers
-pid_readers=""
-n=0
-while [ $n -lt $Nreaders ]; do
-    $testdir/vds_swmr_reader &
-    pid_readers="$pid_readers $!"
-    n=`expr $n + 1`
-done
-$DPRINT pid_readers=$pid_readers
-$IFDEBUG ps
-
-# Collect exit code of the writers
-for xpid in $pid_writers; do
-    $DPRINT checked writer $xpid
-    wait $xpid
-    if test $? -ne 0; then
-        echo writer had error
-        nerrors=`expr $nerrors + 1`
-    fi
-done
-
-# Collect exit code of the readers
-# (they usually finish after the writers)
-for xpid in $pid_readers; do
-    $DPRINT checked reader $xpid
-    wait $xpid
-    if test $? -ne 0; then
-        echo reader had error
-        nerrors=`expr $nerrors + 1`
-    fi
-done
-
-# Check for error and exit if one occurred
-$DPRINT nerrors=$nerrors
-if test $nerrors -ne 0 ; then
-    echo "VDS SWMR tests failed with $nerrors errors."
-    exit 1
-fi
-
-###############################################################################
-## Report and exit
-###############################################################################
-cd ..
-$DPRINT nerrors=$nerrors
-if test $nerrors -eq 0 ; then
-    echo "VDS SWMR tests passed."
-    if test -z "$HDF5_NOCLEANUP"; then
-        # delete the test directory
-        rm -rf vds_swmr_test
-    fi
-    exit 0
-else
-    echo "VDS SWMR tests failed with $nerrors errors."
-    exit 1
-fi
-