[svn-r12001] Purpose:

Moved gif2h5 tool to hl directory

Description:
Added a tools directory under the hl directory and moved the gif2h5 tool
to that directory.

Solution:
The gif2h5 tool was originally built in the tools directory, but this
introduced dependency issues that required special checks in the
Makefiles.am and required the top-level build order to be changed
because it depended on the HL library.
For simplicity in the Makefiles now and in the future, the gif2h5 tool
was moved to be underneath the hl library.

Platforms tested:
mir, copper, modi4, shanti

1 files changed, 0 insertions, 875 deletions

diff --git a/tools/gifconv/Makefile.in b/tools/gifconv/Makefile.in
deleted file mode 100644
index 092521c..0000000
--- a/tools/gifconv/Makefile.in
+++ /dev/null
@@ -1,875 +0,0 @@
-# Makefile.in generated by automake 1.9.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-#
-# HDF5 Library Makefile(.in)
-#
-
-SOURCES = $(gif2h5_SOURCES) $(h52gif_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@bin_PROGRAMS = h52gif$(EXEEXT)
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@bin_PROGRAMS = gif2h5$(EXEEXT) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	h52gif$(EXEEXT)
-subdir = tools/gifconv
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(bin_PROGRAMS)
-am__gif2h5_SOURCES_DIST = gif2hdf.c gif2mem.c decompress.c gifread.c \
-	writehdf.c
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@am_gif2h5_OBJECTS = gif2hdf.$(OBJEXT) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	gif2mem.$(OBJEXT) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	decompress.$(OBJEXT) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	gifread.$(OBJEXT) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	writehdf.$(OBJEXT)
-gif2h5_OBJECTS = $(am_gif2h5_OBJECTS)
-gif2h5_LDADD = $(LDADD)
-am__DEPENDENCIES_1 = $(top_builddir)/tools/lib/libh5tools.la
-am__DEPENDENCIES_2 = $(top_builddir)/src/libhdf5.la
-am__DEPENDENCIES_3 = $(top_builddir)/hl/src/libhdf5_hl.la
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@gif2h5_DEPENDENCIES =  \
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@	$(am__DEPENDENCIES_1) \
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@	$(am__DEPENDENCIES_2)
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@gif2h5_DEPENDENCIES =  \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	$(am__DEPENDENCIES_1) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	$(am__DEPENDENCIES_3) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	$(am__DEPENDENCIES_2)
-am_h52gif_OBJECTS = hdf2gif.$(OBJEXT) hdfgifwr.$(OBJEXT) \
-	readhdf.$(OBJEXT)
-h52gif_OBJECTS = $(am_h52gif_OBJECTS)
-h52gif_LDADD = $(LDADD)
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@h52gif_DEPENDENCIES =  \
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@	$(am__DEPENDENCIES_1) \
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@	$(am__DEPENDENCIES_2)
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@h52gif_DEPENDENCIES =  \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	$(am__DEPENDENCIES_1) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	$(am__DEPENDENCIES_3) \
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@	$(am__DEPENDENCIES_2)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(gif2h5_SOURCES) $(h52gif_SOURCES)
-DIST_SOURCES = $(am__gif2h5_SOURCES_DIST) $(h52gif_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
-AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
-AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
-AWK = @AWK@
-BUILD_ALL_CONDITIONAL_FALSE = @BUILD_ALL_CONDITIONAL_FALSE@
-BUILD_ALL_CONDITIONAL_TRUE = @BUILD_ALL_CONDITIONAL_TRUE@
-BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
-BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
-BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@
-BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@
-BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@
-BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@
-BUILD_PABLO_CONDITIONAL_FALSE = @BUILD_PABLO_CONDITIONAL_FALSE@
-BUILD_PABLO_CONDITIONAL_TRUE = @BUILD_PABLO_CONDITIONAL_TRUE@
-BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@
-BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@
-BUILD_SHARED_ONLY_CONDITIONAL_FALSE = @BUILD_SHARED_ONLY_CONDITIONAL_FALSE@
-BUILD_SHARED_ONLY_CONDITIONAL_TRUE = @BUILD_SHARED_ONLY_CONDITIONAL_TRUE@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-
-# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5,
-# but which shouldn't be exported to h5cc for building other programs.
-CFLAGS = @CFLAGS@ @H5_CFLAGS@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@ @H5_CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@ @H5_CXXFLAGS@
-CXX_SHARED_CONDITIONAL_FALSE = @CXX_SHARED_CONDITIONAL_FALSE@
-CXX_SHARED_CONDITIONAL_TRUE = @CXX_SHARED_CONDITIONAL_TRUE@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DYNAMIC_DIRS = @DYNAMIC_DIRS@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCLIBS = @FCLIBS@
-FFLAGS = @FFLAGS@ @H5_FFLAGS@
-FILTERS = @FILTERS@
-FORTRAN_SHARED_CONDITIONAL_FALSE = @FORTRAN_SHARED_CONDITIONAL_FALSE@
-FORTRAN_SHARED_CONDITIONAL_TRUE = @FORTRAN_SHARED_CONDITIONAL_TRUE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FFLAGS = @H5_FFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZET = @HSIZET@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-MPE = @MPE@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PTHREAD = @PTHREAD@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SETX = @SETX@
-SET_MAKE = @SET_MAKE@
-
-# Hardcode SHELL to be /bin/sh.  Most machines have this shell, and
-# on at least one machine configure fails to detect its existence (janus).
-# Also, when HDF5 is configured on one machine but run on another,
-# configure's automatic SHELL detection may not work on the build machine.
-SHELL = /bin/sh
-SIZE_T = @SIZE_T@
-STATIC_SHARED = @STATIC_SHARED@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-TR = @TR@
-TRACE_API = @TRACE_API@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
-USE_FILTER_NBIT = @USE_FILTER_NBIT@
-USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
-USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_FC = @ac_ct_FC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-
-# Install directories that automake doesn't know about
-includedir = $(exec_prefix)/include
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-TIME = time
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNTESTS instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNTESTS = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-docdir = $(exec_prefix)/doc
-@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5CC = $(bindir)/h5cc
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5CC = $(bindir)/h5cc -shlib
-@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5CC_PP = $(bindir)/h5pcc
-@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5CC_PP = $(bindir)/h5pcc -shlib
-@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5FC = $(bindir)/h5fc
-@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5FC = $(bindir)/h5fc -shlib
-@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5FC_PP = $(bindir)/h5pfc
-@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5FC_PP = $(bindir)/h5pfc -shlib
-@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5CPP = $(bindir)/h5c++
-@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5CPP = $(bindir)/h5c++ -shlib
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
-
-# Include src and tools/lib directories
-INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib -I$(top_srcdir)/hl/src
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@gif2h5_SOURCES = gif2hdf.c gif2mem.c decompress.c gifread.c writehdf.c
-h52gif_SOURCES = hdf2gif.c hdfgifwr.c readhdf.c
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@LDADD = $(LIBH5TOOLS) $(LIBHDF5)
-
-# Programs all depend on the hdf5 library and the tools library
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@LDADD = $(LIBH5TOOLS) $(LIBH5_HL) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tools/gifconv/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  tools/gifconv/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
-gif2h5$(EXEEXT): $(gif2h5_OBJECTS) $(gif2h5_DEPENDENCIES) 
-	@rm -f gif2h5$(EXEEXT)
-	$(LINK) $(gif2h5_LDFLAGS) $(gif2h5_OBJECTS) $(gif2h5_LDADD) $(LIBS)
-h52gif$(EXEEXT): $(h52gif_OBJECTS) $(h52gif_DEPENDENCIES) 
-	@rm -f h52gif$(EXEEXT)
-	$(LINK) $(h52gif_LDFLAGS) $(h52gif_OBJECTS) $(h52gif_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/decompress.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gif2hdf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gif2mem.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gifread.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hdf2gif.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hdfgifwr.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readhdf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/writehdf.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(mkdir_p) $(distdir)/../../config
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \
-	clean clean-binPROGRAMS clean-generic clean-libtool ctags \
-	distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-exec install-exec-am \
-	install-info install-info-am install-man install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-info-am
-
-
-# check-install is a synonym for installcheck.
-# Add this build rule here (rather than in conclude.am, where build rules
-# normally go) because it should be included in the top-level Makefile.am
-# as well.
-check-install: installcheck
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(HDF_FORTRAN)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(HDF_CXX)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(HDF_FORTRAN)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(HDF_CXX)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNTESTS="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd:
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check;              \
-	    fi;                                                               \
-	done
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: