[svn-r22709] HDFFV-8129: reconfigured on jam, Remove overloading of autotools TESTS var, rename configure.in to configure.ac, convert test scripts from hard *.sh to configure managed *sh.in files.

Tested: h5committest

1 files changed, 557 insertions, 0 deletions

diff --git a/tools/h5copy/testh5copy.sh.in b/tools/h5copy/testh5copy.sh.in
new file mode 100644
index 0000000..c7acd9a
--- /dev/null
+++ b/tools/h5copy/testh5copy.sh.in
@@ -0,0 +1,557 @@
+#! /bin/sh
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# Tests for the h5copy tool
+#
+# Pedro Vicente Nunes (pvn@hdfgroup.org), Albert Cheng (acheng@hdfgroup.org)
+# Thursday, July 20, 2006
+#
+
+srcdir=@srcdir@
+
+# source dirs
+SRC_TOOLS="$srcdir/.."
+SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
+# testfiles source dirs for tools
+SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
+SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
+SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
+SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
+SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
+SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
+
+TESTNAME=h5copy
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+######################################################################
+# test files
+# --------------------------------------------------------------------
+# All the test files copy from source directory to test directory
+# NOTE: Keep this framework to add/remove test files.
+#       Any test files from other tools can be used in this framework.
+#       This list are also used for checking exist.
+#       Comment '#' without space can be used.
+# --------------------------------------------------------------------
+# List of files that will be copied over to local test dir
+LIST_HDF5_TEST_FILES="
+$SRC_H5COPY_TESTFILES/h5copytst.h5
+$SRC_H5COPY_TESTFILES/h5copy_ref.h5
+$SRC_H5COPY_TESTFILES/h5copy_extlinks_src.h5
+$SRC_H5COPY_TESTFILES/h5copy_extlinks_trg.h5
+"
+
+# List of expect files that will be copied over to local test dir
+LIST_OTHER_TEST_FILES="
+$SRC_H5COPY_TESTFILES/h5copy_extlinks_src.out.ls
+$SRC_H5COPY_TESTFILES/h5copy_ref.out.ls
+$SRC_H5COPY_TESTFILES/h5copytst.out.ls
+$SRC_H5COPY_TESTFILES/h5copy_misc1.out
+"
+
+H5COPY=h5copy               # The tool name
+H5COPY_BIN=`pwd`/$H5COPY    # The path of the tool binary
+H5DIFF=h5diff               # The h5diff tool name 
+H5DIFF_BIN=`pwd`/../h5diff/$H5DIFF    # The path of the h5diff tool binary
+H5LS=h5ls                   # The h5ls tool name 
+H5LS_ARGS=-Svr              # Arguments to the h5ls tool
+H5LS_BIN=`pwd`/../h5ls/$H5LS # The path of the h5ls tool binary
+CMP='cmp -s'
+DIFF='diff -c'
+CP='cp'
+DIRNAME='dirname'
+LS='ls'
+AWK='awk'
+
+nerrors=0
+verbose=yes
+h5haveexitcode=yes	    # default is yes
+
+TESTDIR=./testfiles
+test -d $TESTDIR || mkdir $TESTDIR
+
+# RUNSERIAL is used. Check if it can return exit code from executalbe correctly.
+if [ -n "$RUNSERIAL_NOEXITCODE" ]; then
+    echo "***Warning*** Serial Exit Code is not passed back to shell corretly."
+    echo "***Warning*** Exit code checking is skipped."
+    h5haveexitcode=no
+fi
+
+#
+# copy test files and expected output files from source dirs to test dir
+#
+COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES"
+
+COPY_TESTFILES_TO_TESTDIR()
+{
+    # copy test files. Used -f to make sure get a new copy
+    for tstfile in $COPY_TESTFILES
+    do
+        # ignore '#' comment
+        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
+        RET=$?
+        if [ $RET -eq 1 ]; then
+            # skip cp if srcdir is same as destdir
+            # this occurs when build/test performed in source dir and
+            # make cp fail
+            SDIR=`$DIRNAME $tstfile`
+            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
+            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
+            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
+    	        $CP -f $tstfile $TESTDIR
+                if [ $? -ne 0 ]; then
+                    echo "Error: FAILED to copy $tstfile ."
+                
+                    # Comment out this to CREATE expected file
+                    exit $EXIT_FAILURE
+                fi
+            fi
+        fi
+    done
+}
+
+
+# Print a "SKIP" message
+SKIP() {
+	 TESTING $H5COPY $@
+	  echo  " -SKIP-"
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Testing".
+TESTING() 
+{
+    SPACES="                                                               "
+    echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+VERIFY() 
+{
+    SPACES="                                                               "
+    echo "Verifying h5diff output $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+VERIFY_H5LS() 
+{
+    SPACES="                                                               "
+    echo "Verifying h5ls file structure $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+VERIFY_OUTPUT() 
+{
+    SPACES="                                                               "
+    echo "Verifying output files $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Source in the output filter function definitions.
+. $srcdir/../../bin/output_filter.sh
+
+# Run a test and print PASS or *FAIL*. If h5copy can complete
+# with exit status 0, consider it pass. If a test fails then increment
+# the `nerrors' global variable.
+# Assumed arguments:
+# $1 is -i
+# $2 is input file
+# $3 is -o
+# $4 is output file
+# $* everything else arguments for h5copy.
+
+TOOLTEST() 
+{
+    actualout="$TESTDIR/tooltest.actualout"
+    actualerr="$TESTDIR/tooltest.actualerr"
+     runh5diff=yes
+     if [ "$1" = -i ]; then
+      inputfile=$2
+     else
+      runh5diff=no
+     fi
+     if [ "$3" = -o ]; then
+      outputfile=$4
+     else 
+      runh5diff=no
+     fi
+  
+    TESTING $H5COPY $@
+    (
+    echo "#############################"
+    echo " output for '$H5COPY $@'"
+    echo "#############################"
+    $RUNSERIAL $H5COPY_BIN $@
+    ) > $actualout 2> $actualerr
+    RET=$?
+    if [ $RET != 0 ]; then
+        echo "*FAILED*"
+        echo "failed result is:"
+        cat $actualout
+        nerrors="`expr $nerrors + 1`"
+    else
+        echo " PASSED"
+
+        # Clean up output file
+        if test -z "$HDF5_NOCLEANUP"; then
+           rm -f $actualout $actualerr
+        fi
+    fi
+    
+    if [ $runh5diff != no ]; then
+     H5DIFFTEST $inputfile $outputfile $7 $9
+    fi
+}
+
+
+# Compare the two text files
+# PASS if same
+# FAIL if different, and show the diff
+#
+# Assumed arguments:
+# $1 is text file1 (expected output)
+# $2 is text file2 (actual output)
+CMP_OUTPUT()
+{
+    expect=$1
+    actual=$2
+
+    VERIFY_OUTPUT $@
+    if [ ! -f $expect ]; then
+        # Create the expect file if it doesn't yet exist.
+        echo " CREATED"
+        cp $actual $expect
+    elif $CMP $expect $actual; then
+        echo " PASSED"
+    else
+        echo "*FAILED*"
+        echo "    Expected output differs from actual output"
+        nerrors="`expr $nerrors + 1`"
+        test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+}
+
+TOOLTEST_FAIL() 
+{
+    expectout="$TESTDIR/$1"
+    actualout="$TESTDIR/$1.actualout"
+    actualerr="$TESTDIR/$1.actualerr"
+    actualout_sav=${actualout}-sav
+    actualerr_sav=${actualerr}-sav
+    shift
+    if [ "$1" = -i ]; then
+      inputfile=$2
+    fi
+    if [ "$3" = -o ]; then
+      outputfile=$4
+    fi
+
+    TESTING $H5COPY $@
+    (
+    #echo "#############################"
+    #echo " output for '$H5COPY $@'"
+    #echo "#############################"
+    $RUNSERIAL $H5COPY_BIN $@
+    ) > $actualout 2> $actualerr
+
+    RET=$?
+    # save actualout and actualerr in case they are needed later.
+    cp $actualout $actualout_sav
+    STDOUT_FILTER $actualout
+    cp $actualerr $actualerr_sav
+    STDERR_FILTER $actualerr
+    if [ $RET != 0 ]; then
+        echo " PASSED"
+        # Verifying output text from h5copy
+        if [ "$expectout" != "SKIP" ]; then
+            # combine stderr to stdout to compare the output at once.
+            # We may seperate stdout and stderr later.
+            cat $actualerr >> $actualout
+            CMP_OUTPUT $expectout $actualout
+        fi
+    else
+        echo "*FAILED*"
+        echo "failed result is:"
+        cat $actualout
+        nerrors="`expr $nerrors + 1`"
+    fi
+   
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+       rm -f $actualout $actualerr $actualout_sav $actualerr_sav
+    fi
+}
+
+
+# Call the h5diff tool
+#
+H5DIFFTEST() 
+{
+    VERIFY  $@
+    $RUNSERIAL $H5DIFF_BIN -q "$@" 
+    RET=$?
+    if [ $RET != 0 ] ; then
+         echo "*FAILED*"
+         nerrors="`expr $nerrors + 1`"
+    else
+         echo " PASSED"
+    fi
+}
+
+# Call the h5diff tool with a call that is expected to fail
+#
+H5DIFFTEST_FAIL() 
+{
+    VERIFY  $@
+    $RUNSERIAL $H5DIFF_BIN -q "$@" 
+    RET=$?
+
+    if [ $h5haveexitcode = 'yes' -a $RET != 1 ] ; then
+         echo "*FAILED*"
+         nerrors="`expr $nerrors + 1`"
+    else
+         echo " PASSED"
+    fi
+}
+
+# Call the h5ls tool to verify the correct output data in the destination file
+#
+H5LSTEST() 
+{
+    expect="$TESTDIR/`basename $1 .h5`.ls"
+    actual="$TESTDIR/`basename $1 .h5`.ls.actualout"
+
+    # Stderr is included in stdout so that the diff can detect
+    # any unexpected output from that stream too.
+    #
+    # Note:  The modification time and storage utilization are masked off
+    #   so that the output is more portable
+    VERIFY_H5LS  $@
+    (
+      $RUNSERIAL $H5LS_BIN $H5LS_ARGS $@
+    ) 2>&1 |sed 's/Modified:.*/Modified:  XXXX-XX-XX XX:XX:XX XXX/' |sed 's/Storage:.*/Storage:   <details removed for portability>/' >$actual
+
+
+   if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+    echo " CREATED"
+    cp $actual $expect
+   elif $CMP $expect $actual; then
+      echo " PASSED"
+   else
+      echo "*FAILED*"
+      echo "    Expected result (*.ls) differs from actual result (*.out)"
+      nerrors="`expr $nerrors + 1`"
+      test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+   fi
+
+   # Clean up output file
+   if test -z "$HDF5_NOCLEANUP"; then
+      rm -f $actual $actual_err
+   fi
+}
+
+# Copy single datasets of various forms from one group to another,
+#       adding object copied to the destination file each time
+#
+# Assumed arguments:
+# <none>
+COPY_OBJECTS() 
+{
+    TESTFILE="$TESTDIR/h5copytst.h5"
+    FILEOUT="$TESTDIR/`basename h5copytst.h5 .h5`.out.h5"
+
+    # Remove any output file left over from previous test run
+    rm -f $FILEOUT
+
+    echo "Testing from `basename $TESTFILE` to `basename $FILEOUT` for the following tests:"
+    echo "Test copying various forms of datasets"
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s simple     -d simple
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s chunk      -d chunk
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s compact    -d compact
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s compound   -d compound
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s compressed -d compressed
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s named_vl   -d named_vl
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s nested_vl  -d nested_vl
+
+    echo "Test copying dataset within group in source file to root of destination"
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_dsets/simple  -d simple_top
+
+    echo "Test copying & renaming dataset"
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s compound   -d rename
+
+    echo "Test copying empty, 'full' & 'nested' groups"
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_empty  -d grp_empty
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d grp_dsets
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_nested -d grp_nested
+
+    echo "Test copying dataset within group in source file to group in destination"
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s /grp_dsets/simple  -d /grp_dsets/simple_group
+
+    echo "Test copying & renaming group"
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d grp_rename
+
+    echo "Test copying 'full' group hierarchy into group in destination file"
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d /grp_rename/grp_dsets
+
+    echo "Test copying objects into group hier. that doesn't exist yet in destination file"
+    TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s simple    -d /A/B1/simple
+    TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s simple    -d /A/B2/simple2
+    TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets/simple    -d /C/D/simple
+    TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets
+    TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested
+
+    # Verify that the file created above is correct
+    H5LSTEST $FILEOUT
+
+    # Remove output file created, if the "no cleanup" environment variable is
+    #   not defined
+    if test -z "$HDF5_NOCLEANUP"; then
+        rm -f $FILEOUT
+    fi
+}
+
+# Copy references in various way.
+# adding to the destination file each time compare the result
+#
+# Assumed arguments:
+# <none>
+COPY_REFERENCES() 
+{
+    TESTFILE="$TESTDIR/h5copy_ref.h5"
+    FILEOUT="$TESTDIR/`basename h5copy_ref.h5 .h5`.out.h5"
+
+    # Remove any output file left over from previous test run
+    rm -f $FILEOUT
+
+    echo "Test copying object and region references"
+    TOOLTEST -f ref -i $TESTFILE -o $FILEOUT -v -s / -d /COPY
+
+    # Verify that the file created above is correct
+    H5LSTEST $FILEOUT
+
+    # Remove output file created, if the "no cleanup" environment variable is
+    #   not defined
+    if test -z "$HDF5_NOCLEANUP"; then
+        rm -f $FILEOUT
+    fi
+}
+
+# Copy external links.
+# adding to the destination file each time compare the result
+#
+# Assumed arguments:
+# <none>
+COPY_EXT_LINKS() 
+{
+    TESTFILE="$TESTDIR/h5copy_extlinks_src.h5"
+    FILEOUT="$TESTDIR/`basename h5copy_extlinks_src.h5 .h5`.out.h5"
+
+    # Remove any output file left over from previous test run
+    rm -f $FILEOUT
+
+    echo "Test copying external link directly without -f ext"
+    TOOLTEST -v -i $TESTFILE -o $FILEOUT -s /group_ext/extlink_dset -d /copy1_dset
+
+    echo "Test copying external link directly with -f ext"
+    TOOLTEST -f ext -i $TESTFILE -o $FILEOUT -v -s /group_ext/extlink_dset -d /copy2_dset
+
+    echo "Test copying dangling external link (no obj) directly without -f ext"
+    TOOLTEST -v -i $TESTFILE -o $FILEOUT -s /group_ext/extlink_notyet1 -d /copy_dangle1_1
+
+    echo "Test copying dangling external link (no obj) directly with -f ext"
+    TOOLTEST -f ext -i $TESTFILE -o $FILEOUT -v -s /group_ext/extlink_notyet1 -d /copy_dangle1_2
+
+    echo "Test copying dangling external link (no file) directly without -f ext"
+    TOOLTEST -v -i $TESTFILE -o $FILEOUT -s /group_ext/extlink_notyet2 -d /copy_dangle2_1
+
+    echo "Test copying dangling external link (no file) directly with -f ext"
+    TOOLTEST -f ext -i $TESTFILE -o $FILEOUT -v -s /group_ext/extlink_notyet2 -d /copy_dangle2_2
+
+    echo "Test copying a group contains external links without -f ext"
+    TOOLTEST -v -i $TESTFILE -o $FILEOUT -s /group_ext -d /copy1_group
+
+    echo "Test copying a group contains external links with -f ext"
+    TOOLTEST -f ext -v -i $TESTFILE -o $FILEOUT -s /group_ext -d /copy2_group
+
+    # Verify that the file created above is correct
+    H5LSTEST $FILEOUT
+
+    # Remove output file created, if the "no cleanup" environment variable is
+    #   not defined
+    if test -z "$HDF5_NOCLEANUP"; then
+        rm -f $FILEOUT
+    fi
+}
+
+# Test misc.
+#
+# Assumed arguments:
+# <none>
+TEST_MISC() 
+{
+    TESTFILE="$TESTDIR/h5copytst.h5"
+    FILEOUT="$TESTDIR/`basename h5copytst.h5 .h5`.out.h5"
+
+    # Remove any output file left over from previous test run
+    rm -f $FILEOUT
+
+    echo "Test copying object into group which doesn't exist, without -p"
+    TOOLTEST_FAIL h5copy_misc1.out -v -i $TESTFILE -o $FILEOUT -s /simple  -d /g1/g2/simple
+
+    echo "Test copying objects to the same file "
+    rm -f $FILEOUT
+    # create temporary test file ($FILEOUT) with some objects
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s /simple -d /simple 
+    TOOLTEST -i $TESTFILE -o $FILEOUT -v -s /grp_dsets  -d /grp_dsets
+    # actual test cases
+    TOOLTEST -i $FILEOUT -o $FILEOUT -v -s /simple -d /simple_cp
+    TOOLTEST -i $FILEOUT -o $FILEOUT -v -s /grp_dsets  -d /grp_dsets_cp
+
+    # Remove output file created, if the "no cleanup" environment variable is
+    #   not defined
+    if test -z "$HDF5_NOCLEANUP"; then
+        rm -f $FILEOUT
+    fi
+}
+
+##############################################################################
+###           T H E   T E S T S                                            ###
+##############################################################################
+# prepare for test
+COPY_TESTFILES_TO_TESTDIR
+
+# Start tests
+COPY_OBJECTS 
+COPY_REFERENCES
+COPY_EXT_LINKS
+TEST_MISC
+
+
+if test $nerrors -eq 0 ; then
+    echo "All $TESTNAME tests passed."
+    exit $EXIT_SUCCESS
+else
+    echo "$TESTNAME tests failed with $nerrors errors."
+    exit $EXIT_FAILURE
+fi