Split tools into src and test - remove folders

1 files changed, 0 insertions, 1345 deletions

diff --git a/tools/h5dump/testh5dump.sh.in b/tools/h5dump/testh5dump.sh.in
deleted file mode 100644
index 9108f44..0000000
--- a/tools/h5dump/testh5dump.sh.in
+++ /dev/null
@@ -1,1345 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tests for the h5dump tool
-
-srcdir=@srcdir@
-
-USE_FILTER_SZIP="@USE_FILTER_SZIP@"
-USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
-
-TESTNAME=h5dump
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-DUMPER=h5dump                     # The tool name
-DUMPER_BIN=`pwd`/$DUMPER          # The path of the tool binary
-
-H5DIFF=../h5diff/h5diff           # The h5diff tool name
-H5DIFF_BIN=`pwd`/$H5DIFF          # The path of the h5diff  tool binary
-
-H5IMPORT=../h5import/h5import     # The h5import tool name
-H5IMPORT_BIN=`pwd`/$H5IMPORT      # The path of the h5import  tool binary
-
-RM='rm -rf'
-CMP='cmp'
-DIFF='diff -c'
-CP='cp'
-DIRNAME='dirname'
-LS='ls'
-AWK='awk'
-
-# Skip plugin module to test missing filter
-ENVCMD="env HDF5_PLUGIN_PRELOAD=::"
-
-nerrors=0
-verbose=yes
-
-# source dirs
-SRC_TOOLS="$srcdir/../"
-
-SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
-# testfiles source dirs for tools
-SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DUMP_ERRORFILES="$srcdir/errfiles"
-SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
-SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
-SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
-SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
-SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
-SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
-
-TEST_P_DIR=./testfiles
-TESTDIR=./testfiles/std
-test -d $TEST_P_DIR || mkdir -p $TEST_P_DIR
-test -d $TESTDIR || mkdir -p $TESTDIR
-
-######################################################################
-# test files
-# --------------------------------------------------------------------
-# All the test files copy from source directory to test directory
-# NOTE: Keep this framework to add/remove test files.
-#       Any test files from other tools can be used in this framework.
-#       This list are also used for checking exist.
-#       Comment '#' without space can be used.
-# --------------------------------------------------------------------
-LIST_HDF5_TEST_FILES="
-$SRC_H5DUMP_TESTFILES/charsets.h5
-$SRC_H5DUMP_TESTFILES/file_space.h5
-$SRC_H5DUMP_TESTFILES/filter_fail.h5
-$SRC_H5DUMP_TESTFILES/packedbits.h5
-$SRC_H5DUMP_TESTFILES/taindices.h5
-$SRC_H5DUMP_TESTFILES/tall.h5
-$SRC_H5DUMP_TESTFILES/tarray1.h5
-$SRC_H5DUMP_TESTFILES/tarray1_big.h5
-$SRC_H5DUMP_TESTFILES/tarray2.h5
-$SRC_H5DUMP_TESTFILES/tarray3.h5
-$SRC_H5DUMP_TESTFILES/tarray4.h5
-$SRC_H5DUMP_TESTFILES/tarray5.h5
-$SRC_H5DUMP_TESTFILES/tarray6.h5
-$SRC_H5DUMP_TESTFILES/tarray7.h5
-$SRC_H5DUMP_TESTFILES/tarray8.h5
-$SRC_H5DUMP_TESTFILES/tattr.h5
-$SRC_H5DUMP_TESTFILES/tattr2.h5
-$SRC_H5DUMP_TESTFILES/tattr4_be.h5
-$SRC_H5DUMP_TESTFILES/tattrintsize.h5
-$SRC_H5DUMP_TESTFILES/tattrreg.h5
-$SRC_H5DUMP_TESTFILES/tbigdims.h5
-$SRC_H5DUMP_TESTFILES/tbinary.h5
-$SRC_H5DUMP_TESTFILES/tchar.h5
-$SRC_H5DUMP_TESTFILES/tcmpdattrintsize.h5
-$SRC_H5DUMP_TESTFILES/tcmpdintsize.h5
-$SRC_H5DUMP_TESTFILES/tcompound.h5
-$SRC_H5DUMP_TESTFILES/tcompound_complex.h5
-$SRC_H5DUMP_TESTFILES/tcompound_complex2.h5
-$SRC_H5DUMP_TESTFILES/tdatareg.h5
-$SRC_H5DUMP_TESTFILES/tdset.h5
-$SRC_H5DUMP_TESTFILES/tempty.h5
-$SRC_H5DUMP_TESTFILES/tsoftlinks.h5
-$SRC_H5DUMP_TESTFILES/textlinkfar.h5
-$SRC_H5DUMP_TESTFILES/textlinksrc.h5
-$SRC_H5DUMP_TESTFILES/textlinktar.h5
-$SRC_H5DUMP_TESTFILES/textlink.h5
-$SRC_H5DUMP_TESTFILES/tfamily00000.h5
-$SRC_H5DUMP_TESTFILES/tfamily00001.h5
-$SRC_H5DUMP_TESTFILES/tfamily00002.h5
-$SRC_H5DUMP_TESTFILES/tfamily00003.h5
-$SRC_H5DUMP_TESTFILES/tfamily00004.h5
-$SRC_H5DUMP_TESTFILES/tfamily00005.h5
-$SRC_H5DUMP_TESTFILES/tfamily00006.h5
-$SRC_H5DUMP_TESTFILES/tfamily00007.h5
-$SRC_H5DUMP_TESTFILES/tfamily00008.h5
-$SRC_H5DUMP_TESTFILES/tfamily00009.h5
-$SRC_H5DUMP_TESTFILES/tfamily00010.h5
-$SRC_H5DUMP_TESTFILES/tfcontents1.h5
-$SRC_H5DUMP_TESTFILES/tfcontents2.h5
-$SRC_H5DUMP_TESTFILES/tfilters.h5
-$SRC_H5DUMP_TESTFILES/tfpformat.h5
-$SRC_H5DUMP_TESTFILES/tfvalues.h5
-$SRC_H5DUMP_TESTFILES/tgroup.h5
-$SRC_H5DUMP_TESTFILES/tgrp_comments.h5
-$SRC_H5DUMP_TESTFILES/thlink.h5
-$SRC_H5DUMP_TESTFILES/thyperslab.h5
-$SRC_H5DUMP_TESTFILES/tintsattrs.h5
-$SRC_H5DUMP_TESTFILES/tints4dims.h5
-$SRC_H5DUMP_TESTFILES/tlarge_objname.h5
-#$SRC_H5DUMP_TESTFILES/tldouble.h5
-$SRC_H5DUMP_TESTFILES/tlonglinks.h5
-$SRC_H5DUMP_TESTFILES/tloop.h5
-$SRC_H5DUMP_TESTFILES/tmulti-b.h5
-$SRC_H5DUMP_TESTFILES/tmulti-g.h5
-$SRC_H5DUMP_TESTFILES/tmulti-l.h5
-$SRC_H5DUMP_TESTFILES/tmulti-o.h5
-$SRC_H5DUMP_TESTFILES/tmulti-r.h5
-$SRC_H5DUMP_TESTFILES/tmulti-s.h5
-$SRC_H5DUMP_TESTFILES/tnamed_dtype_attr.h5
-$SRC_H5DUMP_TESTFILES/tnestedcomp.h5
-$SRC_H5DUMP_TESTFILES/tnestedcmpddt.h5
-$SRC_H5DUMP_TESTFILES/tno-subset.h5
-$SRC_H5DUMP_TESTFILES/tnullspace.h5
-$SRC_H5DUMP_TESTFILES/zerodim.h5
-$SRC_H5DUMP_TESTFILES/torderattr.h5
-$SRC_H5DUMP_TESTFILES/tordergr.h5
-$SRC_H5DUMP_TESTFILES/tsaf.h5
-$SRC_H5DUMP_TESTFILES/tscalarattrintsize.h5
-$SRC_H5DUMP_TESTFILES/tscalarintattrsize.h5
-$SRC_H5DUMP_TESTFILES/tscalarintsize.h5
-$SRC_H5DUMP_TESTFILES/tscalarstring.h5
-$SRC_H5DUMP_TESTFILES/tslink.h5
-$SRC_H5DUMP_TESTFILES/tsplit_file-m.h5
-$SRC_H5DUMP_TESTFILES/tsplit_file-r.h5
-$SRC_H5DUMP_TESTFILES/tstr.h5
-$SRC_H5DUMP_TESTFILES/tstr2.h5
-$SRC_H5DUMP_TESTFILES/tstr3.h5
-$SRC_H5DUMP_TESTFILES/tudlink.h5
-$SRC_H5DUMP_TESTFILES/tvldtypes1.h5
-$SRC_H5DUMP_TESTFILES/tvldtypes2.h5
-$SRC_H5DUMP_TESTFILES/tvldtypes3.h5
-$SRC_H5DUMP_TESTFILES/tvldtypes4.h5
-$SRC_H5DUMP_TESTFILES/tvldtypes5.h5
-$SRC_H5DUMP_TESTFILES/tvlenstr_array.h5
-$SRC_H5DUMP_TESTFILES/tvlstr.h5
-$SRC_H5DUMP_TESTFILES/tvms.h5
-"
-
-LIST_OTHER_TEST_FILES="
-$SRC_H5DUMP_TESTFILES/charsets.ddl
-$SRC_H5DUMP_TESTFILES/file_space.ddl
-$SRC_H5DUMP_TESTFILES/filter_fail.ddl
-$SRC_H5DUMP_TESTFILES/non_existing.ddl
-$SRC_H5DUMP_TESTFILES/packedbits.ddl
-$SRC_H5DUMP_TESTFILES/tall-1.ddl
-$SRC_H5DUMP_TESTFILES/tall-2.ddl
-$SRC_H5DUMP_TESTFILES/tall-2A.ddl
-$SRC_H5DUMP_TESTFILES/tall-2A0.ddl
-$SRC_H5DUMP_TESTFILES/tall-2B.ddl
-$SRC_H5DUMP_TESTFILES/tall-3.ddl
-$SRC_H5DUMP_TESTFILES/tall-4s.ddl
-$SRC_H5DUMP_TESTFILES/tall-5s.ddl
-$SRC_H5DUMP_TESTFILES/tall-6.ddl
-$SRC_H5DUMP_TESTFILES/tall-6.exp
-$SRC_H5DUMP_TESTFILES/tall-7.ddl
-$SRC_H5DUMP_TESTFILES/tall-7N.ddl
-$SRC_H5DUMP_TESTFILES/tallfilters.ddl
-$SRC_H5DUMP_TESTFILES/tarray1.ddl
-$SRC_H5DUMP_TESTFILES/tarray1_big.ddl
-$SRC_H5DUMP_TESTFILES/tarray2.ddl
-$SRC_H5DUMP_TESTFILES/tarray3.ddl
-$SRC_H5DUMP_TESTFILES/tarray4.ddl
-$SRC_H5DUMP_TESTFILES/tarray5.ddl
-$SRC_H5DUMP_TESTFILES/tarray6.ddl
-$SRC_H5DUMP_TESTFILES/tarray7.ddl
-$SRC_H5DUMP_TESTFILES/tarray8.ddl
-$SRC_H5DUMP_TESTFILES/tattr-1.ddl
-$SRC_H5DUMP_TESTFILES/tattr-2.ddl
-$SRC_H5DUMP_TESTFILES/tattr-3.ddl
-$SRC_H5DUMP_TESTFILES/tattr-4_be.ddl
-$SRC_H5DUMP_TESTFILES/tattrcontents1.ddl
-$SRC_H5DUMP_TESTFILES/tattrcontents2.ddl
-$SRC_H5DUMP_TESTFILES/tattrintsize.ddl
-$SRC_H5DUMP_TESTFILES/tattrreg.ddl
-$SRC_H5DUMP_TESTFILES/tattrregR.ddl
-$SRC_H5DUMP_TESTFILES/tbin1.ddl
-$SRC_H5DUMP_TESTFILES/tbin1.ddl
-$SRC_H5DUMP_TESTFILES/tbin2.ddl
-$SRC_H5DUMP_TESTFILES/tbin3.ddl
-$SRC_H5DUMP_TESTFILES/tbin4.ddl
-$SRC_H5DUMP_TESTFILES/tbinregR.ddl
-$SRC_H5DUMP_TESTFILES/tbigdims.ddl
-$SRC_H5DUMP_TESTFILES/tboot1.ddl
-$SRC_H5DUMP_TESTFILES/tboot2.ddl
-$SRC_H5DUMP_TESTFILES/tboot2A.ddl
-$SRC_H5DUMP_TESTFILES/tboot2B.ddl
-$SRC_H5DUMP_TESTFILES/tchar1.ddl
-$SRC_H5DUMP_TESTFILES/tchunked.ddl
-$SRC_H5DUMP_TESTFILES/tcmpdattrintsize.ddl
-$SRC_H5DUMP_TESTFILES/tcmpdintsize.ddl
-$SRC_H5DUMP_TESTFILES/tcomp-1.ddl
-$SRC_H5DUMP_TESTFILES/tcomp-2.ddl
-$SRC_H5DUMP_TESTFILES/tcomp-3.ddl
-$SRC_H5DUMP_TESTFILES/tcomp-4.ddl
-$SRC_H5DUMP_TESTFILES/tcompound_complex2.ddl
-$SRC_H5DUMP_TESTFILES/tcompact.ddl
-$SRC_H5DUMP_TESTFILES/tcontents.ddl
-$SRC_H5DUMP_TESTFILES/tcontiguos.ddl
-$SRC_H5DUMP_TESTFILES/tdatareg.ddl
-$SRC_H5DUMP_TESTFILES/tdataregR.ddl
-$SRC_H5DUMP_TESTFILES/tdeflate.ddl
-$SRC_H5DUMP_TESTFILES/tdset-1.ddl
-$SRC_H5DUMP_TESTFILES/tdset-2.ddl
-$SRC_H5DUMP_TESTFILES/tdset-3s.ddl
-$SRC_H5DUMP_TESTFILES/tempty.ddl
-$SRC_H5DUMP_TESTFILES/texceedsubstart.ddl
-$SRC_H5DUMP_TESTFILES/texceedsubcount.ddl
-$SRC_H5DUMP_TESTFILES/texceedsubstride.ddl
-$SRC_H5DUMP_TESTFILES/texceedsubblock.ddl
-$SRC_H5DUMP_TESTFILES/texternal.ddl
-$SRC_H5DUMP_TESTFILES/textlinksrc.ddl
-$SRC_H5DUMP_TESTFILES/textlinkfar.ddl
-$SRC_H5DUMP_TESTFILES/textlink.ddl
-$SRC_H5DUMP_TESTFILES/tfamily.ddl
-$SRC_H5DUMP_TESTFILES/tfill.ddl
-$SRC_H5DUMP_TESTFILES/tfletcher32.ddl
-$SRC_H5DUMP_TESTFILES/tfpformat.ddl
-$SRC_H5DUMP_TESTFILES/tgroup-1.ddl
-$SRC_H5DUMP_TESTFILES/tgroup-2.ddl
-$SRC_H5DUMP_TESTFILES/tgrp_comments.ddl
-$SRC_H5DUMP_TESTFILES/thlink-1.ddl
-$SRC_H5DUMP_TESTFILES/thlink-2.ddl
-$SRC_H5DUMP_TESTFILES/thlink-3.ddl
-$SRC_H5DUMP_TESTFILES/thlink-4.ddl
-$SRC_H5DUMP_TESTFILES/thlink-5.ddl
-$SRC_H5DUMP_TESTFILES/thyperslab.ddl
-$SRC_H5DUMP_TESTFILES/tindicesno.ddl
-$SRC_H5DUMP_TESTFILES/tindicessub1.ddl
-$SRC_H5DUMP_TESTFILES/tindicessub2.ddl
-$SRC_H5DUMP_TESTFILES/tindicessub3.ddl
-$SRC_H5DUMP_TESTFILES/tindicessub4.ddl
-$SRC_H5DUMP_TESTFILES/tindicesyes.ddl
-$SRC_H5DUMP_TESTFILES/tints4dims.ddl
-$SRC_H5DUMP_TESTFILES/tints4dimsBlock2.ddl
-$SRC_H5DUMP_TESTFILES/tints4dimsBlockEq.ddl
-$SRC_H5DUMP_TESTFILES/tints4dimsCount2.ddl
-$SRC_H5DUMP_TESTFILES/tints4dimsCountEq.ddl
-$SRC_H5DUMP_TESTFILES/tints4dimsStride2.ddl
-$SRC_H5DUMP_TESTFILES/tintsattrs.ddl
-$SRC_H5DUMP_TESTFILES/tlarge_objname.ddl
-#$SRC_H5DUMP_TESTFILES/tldouble.ddl
-$SRC_H5DUMP_TESTFILES/tlonglinks.ddl
-$SRC_H5DUMP_TESTFILES/tloop-1.ddl
-$SRC_H5DUMP_TESTFILES/tmulti.ddl
-$SRC_H5DUMP_TESTFILES/tmultifile.ddl
-$SRC_H5DUMP_TESTFILES/tqmarkfile.ddl
-$SRC_H5DUMP_TESTFILES/tstarfile.ddl
-$SRC_H5DUMP_TESTFILES/tnamed_dtype_attr.ddl
-$SRC_H5DUMP_TESTFILES/tnestcomp-1.ddl
-$SRC_H5DUMP_TESTFILES/tnestedcmpddt.ddl
-$SRC_H5DUMP_TESTFILES/tnbit.ddl
-$SRC_H5DUMP_TESTFILES/tnoattrdata.ddl
-$SRC_H5DUMP_TESTFILES/tnoattrddl.ddl
-$SRC_H5DUMP_TESTFILES/tnodata.ddl
-$SRC_H5DUMP_TESTFILES/tnoddl.ddl
-$SRC_H5DUMP_TESTFILES/tnoddlfile.ddl
-$SRC_H5DUMP_TESTFILES/tnoddlfile.exp
-$SRC_H5DUMP_TESTFILES/tno-subset.ddl
-$SRC_H5DUMP_TESTFILES/tnullspace.ddl
-$SRC_H5DUMP_TESTFILES/trawdatafile.ddl
-$SRC_H5DUMP_TESTFILES/trawdatafile.exp
-$SRC_H5DUMP_TESTFILES/trawssetfile.ddl
-$SRC_H5DUMP_TESTFILES/trawssetfile.exp
-$SRC_H5DUMP_TESTFILES/zerodim.ddl
-$SRC_H5DUMP_TESTFILES/tordergr1.ddl
-$SRC_H5DUMP_TESTFILES/tordergr2.ddl
-$SRC_H5DUMP_TESTFILES/tordergr3.ddl
-$SRC_H5DUMP_TESTFILES/tordergr4.ddl
-$SRC_H5DUMP_TESTFILES/tordergr5.ddl
-$SRC_H5DUMP_TESTFILES/torderattr1.ddl
-$SRC_H5DUMP_TESTFILES/torderattr2.ddl
-$SRC_H5DUMP_TESTFILES/torderattr3.ddl
-$SRC_H5DUMP_TESTFILES/torderattr4.ddl
-$SRC_H5DUMP_TESTFILES/tordercontents1.ddl
-$SRC_H5DUMP_TESTFILES/tordercontents2.ddl
-$SRC_H5DUMP_TESTFILES/torderlinks1.ddl
-$SRC_H5DUMP_TESTFILES/torderlinks2.ddl
-$SRC_H5DUMP_TESTFILES/tperror.ddl
-$SRC_H5DUMP_TESTFILES/treadfilter.ddl
-$SRC_H5DUMP_TESTFILES/treadintfilter.ddl
-$SRC_H5DUMP_TESTFILES/treference.ddl
-$SRC_H5DUMP_TESTFILES/tsaf.ddl
-$SRC_H5DUMP_TESTFILES/tscalarattrintsize.ddl
-$SRC_H5DUMP_TESTFILES/tscalarintattrsize.ddl
-$SRC_H5DUMP_TESTFILES/tscalarintsize.ddl
-$SRC_H5DUMP_TESTFILES/tscalarstring.ddl
-$SRC_H5DUMP_TESTFILES/tscaleoffset.ddl
-$SRC_H5DUMP_TESTFILES/tshuffle.ddl
-$SRC_H5DUMP_TESTFILES/tslink-1.ddl
-$SRC_H5DUMP_TESTFILES/tslink-2.ddl
-$SRC_H5DUMP_TESTFILES/tslink-D.ddl
-$SRC_H5DUMP_TESTFILES/tsplit_file.ddl
-$SRC_H5DUMP_TESTFILES/tstr-1.ddl
-$SRC_H5DUMP_TESTFILES/tstr-2.ddl
-$SRC_H5DUMP_TESTFILES/tstr2bin2.exp
-$SRC_H5DUMP_TESTFILES/tstr2bin6.exp
-$SRC_H5DUMP_TESTFILES/tstring.ddl
-$SRC_H5DUMP_TESTFILES/tstring2.ddl
-$SRC_H5DUMP_TESTFILES/tstringe.ddl
-$SRC_H5DUMP_TESTFILES/tszip.ddl
-$SRC_H5DUMP_TESTFILES/tudlink-1.ddl
-$SRC_H5DUMP_TESTFILES/tudlink-2.ddl
-$SRC_H5DUMP_TESTFILES/tuserfilter.ddl
-$SRC_H5DUMP_TESTFILES/tvldtypes1.ddl
-$SRC_H5DUMP_TESTFILES/tvldtypes2.ddl
-$SRC_H5DUMP_TESTFILES/tvldtypes3.ddl
-$SRC_H5DUMP_TESTFILES/tvldtypes4.ddl
-$SRC_H5DUMP_TESTFILES/tvldtypes5.ddl
-$SRC_H5DUMP_TESTFILES/tvlenstr_array.ddl
-$SRC_H5DUMP_TESTFILES/tvlstr.ddl
-$SRC_H5DUMP_TESTFILES/tvms.ddl
-$SRC_H5DUMP_TESTFILES/twidedisplay.ddl
-$SRC_H5DUMP_TESTFILES/twithddl.exp
-$SRC_H5DUMP_TESTFILES/twithddlfile.ddl
-$SRC_H5DUMP_TESTFILES/twithddlfile.exp
-$SRC_H5DUMP_TESTFILES/h5dump-help.txt
-$SRC_H5DUMP_TESTFILES/out3.h5import
-$SRC_H5DUMP_TESTFILES/tbinregR.exp
-"
-
-LIST_ERROR_TEST_FILES="
-${SRC_H5DUMP_ERRORFILES}/filter_fail.err
-${SRC_H5DUMP_ERRORFILES}/non_existing.err
-${SRC_H5DUMP_ERRORFILES}/tall-1.err
-${SRC_H5DUMP_ERRORFILES}/tall-2A.err
-${SRC_H5DUMP_ERRORFILES}/tall-2A0.err
-${SRC_H5DUMP_ERRORFILES}/tall-2B.err
-${SRC_H5DUMP_ERRORFILES}/tarray1_big.err
-${SRC_H5DUMP_ERRORFILES}/tattr-3.err
-${SRC_H5DUMP_ERRORFILES}/tattrregR.err
-${SRC_H5DUMP_ERRORFILES}/tcomp-3.err
-${SRC_H5DUMP_ERRORFILES}/tdataregR.err
-${SRC_H5DUMP_ERRORFILES}/tdset-2.err
-${SRC_H5DUMP_ERRORFILES}/texceedsubblock.err
-${SRC_H5DUMP_ERRORFILES}/texceedsubcount.err
-${SRC_H5DUMP_ERRORFILES}/texceedsubstart.err
-${SRC_H5DUMP_ERRORFILES}/texceedsubstride.err
-${SRC_H5DUMP_ERRORFILES}/textlink.err
-${SRC_H5DUMP_ERRORFILES}/textlinkfar.err
-${SRC_H5DUMP_ERRORFILES}/textlinksrc.err
-${SRC_H5DUMP_ERRORFILES}/tgroup-2.err
-${SRC_H5DUMP_ERRORFILES}/torderlinks1.err
-${SRC_H5DUMP_ERRORFILES}/torderlinks2.err
-${SRC_H5DUMP_ERRORFILES}/tperror.err
-${SRC_H5DUMP_ERRORFILES}/tqmarkfile.err
-${SRC_H5DUMP_ERRORFILES}/tslink-D.err
-"
-
-#
-# copy test files and expected output files from source dirs to test dir
-#
-COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES $LIST_ERROR_TEST_FILES"
-
-COPY_TESTFILES_TO_TESTDIR()
-{
-    # copy test files. Used -f to make sure get a new copy
-    for tstfile in $COPY_TESTFILES
-    do
-        # ignore '#' comment
-        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
-        RET=$?
-        if [ $RET -eq 1 ]; then
-            # skip cp if srcdir is same as destdir
-            # this occurs when build/test performed in source dir and
-            # make cp fail
-            SDIR=`$DIRNAME $tstfile`
-            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
-            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
-            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-                $CP -f $tstfile $TESTDIR
-                if [ $? -ne 0 ]; then
-                    echo "Error: FAILED to copy $tstfile ."
-
-                    # Comment out this to CREATE expected file
-                    exit $EXIT_FAILURE
-                fi
-            fi
-        fi
-    done
-}
-
-CLEAN_TESTFILES_AND_TESTDIR()
-{
-    # skip rm if srcdir is same as destdir
-    # this occurs when build/test performed in source dir and
-    # make cp fail
-    SDIR=$SRC_H5DUMP_TESTFILES
-    INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
-    INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
-    if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-        $RM $TESTDIR
-    fi
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-#
-TESTING() {
-   SPACES="                                                               "
-   echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Source in the output filter function definitions.
-. $srcdir/../../bin/output_filter.sh
-
-# Run a test and print PASS or *FAIL*.  If a test fails then increment
-# the `nerrors' global variable and (if $verbose is set) display the
-# difference between the actual output and the expected output. The
-# expected output is given as the first argument to this function and
-# the actual output file is calculated by replacing the `.ddl' with
-# `.out'.  The actual output is not removed if $HDF5_NOCLEANUP has a
-# non-zero value.
-# If $1 == ignorecase then do caseless CMP and DIFF.
-# ADD_H5_TEST
-TOOLTEST() {
-    # check if caseless compare and diff requested
-    if [ "$1" = ignorecase ]; then
-    caseless="-i"
-    # replace cmp with diff which runs much longer.
-    xCMP="$DIFF -i"
-    shift
-    else
-    caseless=""
-    # stick with faster cmp if ignorecase is not requested.
-    xCMP="$CMP"
-    fi
-
-    expect="$TESTDIR/$1"
-    actual="$TESTDIR/`basename $1 .ddl`.out"
-    actual_err="$TESTDIR/`basename $1 .ddl`.err"
-    actual_sav=${actual}-sav
-    actual_err_sav=${actual_err}-sav
-    shift
-
-    # Run test.
-    TESTING $DUMPER $@
-    (
-    cd $TESTDIR
-      $RUNSERIAL $DUMPER_BIN "$@"
-    ) >$actual 2>$actual_err
-
-    # save actual and actual_err in case they are needed later.
-    cp $actual $actual_sav
-    STDOUT_FILTER $actual
-    cp $actual_err $actual_err_sav
-    STDERR_FILTER $actual_err
-    cat $actual_err >> $actual
-
-  if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-     echo " CREATED"
-     cp $actual $expect
-    elif $xCMP $expect $actual > /dev/null 2>&1 ; then
-     echo " PASSED"
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.ddl) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $caseless $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-     rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext
-    fi
-
-}
-
-
-# same as TOOLTEST1 but compares generated file to expected output
-#                   and compares the generated data file to the expected data file
-# used for the binary tests that expect a full path in -o without -b
-# ADD_H5_EXPORT_TEST
-TOOLTEST2() {
-
-    expectdata="$TESTDIR/$1"
-    expect="$TESTDIR/`basename $1 .exp`.ddl"
-    actualdata="$TESTDIR/`basename $1 .exp`.txt"
-    actual="$TESTDIR/`basename $1 .exp`.out"
-    actual_err="$TESTDIR/`basename $1 .exp`.err"
-    shift
-
-    # Run test.
-    TESTING $DUMPER $@
-    (
-      cd $TESTDIR
-      $RUNSERIAL $DUMPER_BIN "$@"
-    ) >$actual 2>$actual_err
-    cat $actual_err >> $actual
-
-    if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-     echo " CREATED"
-     cp $actual $expect
-    elif $CMP $expect $actual; then
-      if [ ! -f $expectdata ]; then
-      # Create the expect data file if it doesn't yet exist.
-        echo " CREATED"
-        cp $actualdata $expectdata
-      elif $CMP $expectdata $actualdata; then
-        echo " PASSED"
-      else
-        echo "*FAILED*"
-        echo "    Expected datafile (*.exp) differs from actual datafile (*.txt)"
-        nerrors="`expr $nerrors + 1`"
-        test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/    /'
-      fi
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.ddl) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-     rm -f $actual $actualdata $actual_err
-    fi
-
-}
-
-# same as TOOLTEST2 but compares generated file to expected ddl file
-#                   and compares the generated data file to the expected data file
-# used for the binary tests that expect a full path in -o without -b
-# ADD_H5_TEST_EXPORT
-TOOLTEST2A() {
-
-    expectdata="$TESTDIR/$1"
-    expect="$TESTDIR/`basename $1 .exp`.ddl"
-    actualdata="$TESTDIR/`basename $1 .exp`.txt"
-    actual="$TESTDIR/`basename $1 .exp`.out"
-    actual_err="$TESTDIR/`basename $1 .exp`.err"
-    shift
-    expectmeta="$TESTDIR/$1"
-    actualmeta="$TESTDIR/`basename $1 .exp`.txt"
-    shift
-
-    # Run test.
-    TESTING $DUMPER $@
-    (
-      cd $TESTDIR
-      $RUNSERIAL $DUMPER_BIN "$@"
-    ) >$actual 2>$actual_err
-    cat $actual_err >> $actual
-
-    if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-     echo " CREATED"
-     cp $actual $expect
-    elif $CMP $expect $actual; then
-      if [ ! -f $expectdata ]; then
-      # Create the expect data file if it doesn't yet exist.
-        echo " CREATED"
-        cp $actualdata $expectdata
-      elif $DIFF $expectdata $actualdata; then
-        if [ ! -f $expectmeta ]; then
-        # Create the expect meta file if it doesn't yet exist.
-          echo " CREATED"
-          cp $actualmeta $expectmeta
-        elif $CMP $expectmeta $actualmeta; then
-          echo " PASSED"
-        else
-          echo "*FAILED*"
-          echo "    Expected metafile (*.ddl) differs from actual metafile (*.txt)"
-          nerrors="`expr $nerrors + 1`"
-          test yes = "$verbose" && $DIFF $expectmeta $actualmeta |sed 's/^/    /'
-        fi
-      else
-        echo "*FAILED*"
-        echo "    Expected datafile (*.exp) differs from actual datafile (*.txt)"
-        nerrors="`expr $nerrors + 1`"
-        test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/    /'
-      fi
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.ddl) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-     rm -f $actual $actualdata $actual_err $actualmeta
-    fi
-
-}
-
-# same as TOOLTEST2 but only compares the generated data file to the expected data file
-# used for the binary tests that expect a full path in -o with -b
-# ADD_H5_EXPORT_TEST
-TOOLTEST2B() {
-
-    expectdata="$TESTDIR/$1"
-    actualdata="$TESTDIR/`basename $1 .exp`.txt"
-    actual="$TESTDIR/`basename $1 .exp`.out"
-    actual_err="$TESTDIR/`basename $1 .exp`.err"
-    shift
-
-    # Run test.
-    TESTING $DUMPER $@
-    (
-      cd $TESTDIR
-      $RUNSERIAL $DUMPER_BIN "$@"
-    ) >$actual 2>$actual_err
-    cat $actual_err >> $actual
-
-    if [ ! -f $expectdata ]; then
-    # Create the expect data file if it doesn't yet exist.
-      echo " CREATED"
-      cp $actualdata $expectdata
-    elif $CMP $expectdata $actualdata; then
-      echo " PASSED"
-    else
-      echo "*FAILED*"
-      echo "    Expected datafile (*.exp) differs from actual datafile (*.txt)"
-      nerrors="`expr $nerrors + 1`"
-      test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-     rm -f $actual $actualdata $actual_err
-    fi
-
-}
-
-# same as TOOLTEST but filters error stack outp
-# Extract file name, line number, version and thread IDs because they may be different
-TOOLTEST3() {
-
-    expect="$TESTDIR/$1"
-    actual="$TESTDIR/`basename $1 .ddl`.out"
-    actual_err="$TESTDIR/`basename $1 .ddl`.err"
-    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
-    actual_sav=${actual}-sav
-    actual_err_sav=${actual_err}-sav
-    shift
-
-    # Run test.
-    TESTING $DUMPER $@
-    (
-      cd $TESTDIR
-      $RUNSERIAL $DUMPER_BIN "$@"
-    ) >$actual 2>$actual_err
-
-    # save actual and actual_err in case they are needed later.
-    cp $actual $actual_sav
-    STDOUT_FILTER $actual
-    cp $actual_err $actual_err_sav
-    STDERR_FILTER $actual_err
-
-    # Extract file name, line number, version and thread IDs because they may be different
-    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
-        -e 's/line [0-9]*/line (number)/' \
-        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
-        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
-        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
-        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
-     $actual_err > $actual_ext
-    cat $actual_ext >> $actual
-
-    if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-     echo " CREATED"
-     cp $actual $expect
-    elif $CMP $expect $actual; then
-     echo " PASSED"
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.ddl) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-   rm -f $actual $actual_err $actual_sav $actual_err_sav
-    fi
-
-}
-
-# same as TOOLTEST3 but filters error stack output and compares to an error file
-# Extract file name, line number, version and thread IDs because they may be different
-# ADD_H5ERR_MASK_TEST
-TOOLTEST4() {
-
-    expect="$TESTDIR/$1"
-    expect_err="$TESTDIR/`basename $1 .ddl`.err"
-    actual="$TESTDIR/`basename $1 .ddl`.out"
-    actual_err="$TESTDIR/`basename $1 .ddl`.oerr"
-    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
-    actual_sav=${actual}-sav
-    actual_err_sav=${actual_err}-sav
-    shift
-
-    # Run test.
-    TESTING $DUMPER $@
-    (
-      cd $TESTDIR
-      $RUNSERIAL $DUMPER_BIN "$@"
-    ) >$actual 2>$actual_err
-
-    # save actual and actual_err in case they are needed later.
-    cp $actual $actual_sav
-    STDOUT_FILTER $actual
-    cp $actual_err $actual_err_sav
-    STDERR_FILTER $actual_err
-
-    # Extract file name, line number, version and thread IDs because they may be different
-    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
-        -e 's/line [0-9]*/line (number)/' \
-        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
-        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
-        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
-        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
-     $actual_err > $actual_ext
-    #cat $actual_ext >> $actual
-
-    if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-     echo " CREATED"
-     cp $actual $expect
-    elif $CMP $expect $actual; then
-     if $CMP $expect_err $actual_ext; then
-      echo " PASSED"
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.err) differs from actual result (*.oerr)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/    /'
-    fi
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.ddl) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-   rm -f $actual $actual_err $actual_sav $actual_err_sav
-    fi
-
-}
-
-# same as TOOLTEST4 but disables plugin filter loading
-# silences extra error output on some platforms
-# ADD_H5ERR_MASK_TEST
-TOOLTEST5() {
-
-    expect="$TESTDIR/$1"
-    expect_err="$TESTDIR/`basename $1 .ddl`.err"
-    actual="$TESTDIR/`basename $1 .ddl`.out"
-    actual_err="$TESTDIR/`basename $1 .ddl`.oerr"
-    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
-    actual_sav=${actual}-sav
-    actual_err_sav=${actual_err}-sav
-    shift
-
-    # Run test.
-    TESTING $DUMPER $@
-    (
-      cd $TESTDIR
-      $ENVCMD $RUNSERIAL $DUMPER_BIN "$@"
-    ) >$actual 2>$actual_err
-
-    # save actual and actual_err in case they are needed later.
-    cp $actual $actual_sav
-    STDOUT_FILTER $actual
-    cp $actual_err $actual_err_sav
-    STDERR_FILTER $actual_err
-
-    # Extract file name, line number, version and thread IDs because they may be different
-    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
-        -e 's/line [0-9]*/line (number)/' \
-        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
-        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
-        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
-        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
-     $actual_err > $actual_ext
-    #cat $actual_ext >> $actual
-
-    if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-     echo " CREATED"
-     cp $actual $expect
-    elif $CMP $expect $actual; then
-     if $CMP $expect_err $actual_ext; then
-      echo " PASSED"
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.err) differs from actual result (*.oerr)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/    /'
-    fi
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.ddl) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-   rm -f $actual $actual_err $actual_sav $actual_err_sav
-    fi
-
-}
-# ADD_HELP_TEST
-TOOLTEST_HELP() {
-
-    expect="$TESTDIR/$1"
-    actual="$TESTDIR/`basename $1 .txt`.out"
-    actual_err="$TESTDIR/`basename $1 .txt`.err"
-    shift
-
-    # Run test.
-    TESTING $DUMPER $@
-    (
-      cd $TESTDIR
-      $RUNSERIAL $DUMPER_BIN "$@"
-    ) >$actual 2>$actual_err
-    cat $actual_err >> $actual
-
-    if [ ! -f $expectdata ]; then
-    # Create the expect data file if it doesn't yet exist.
-      echo " CREATED"
-      cp $actual $expect-CREATED
-    elif $CMP $expect $actual; then
-      echo " PASSED"
-    else
-      echo "*FAILED*"
-      echo "    Expected output (*.txt) differs from actual output (*.out)"
-      nerrors="`expr $nerrors + 1`"
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-     rm -f $actual $actual_err
-    fi
-
-}
-
-# Print a "SKIP" message
-SKIP() {
-   TESTING $DUMPER $@
-    echo  " -SKIP-"
-}
-
-# Print a line-line message left justified in a field of 70 characters
-#
-PRINT_H5DIFF() {
- SPACES="                                                               "
- echo " Running h5diff $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-
-# Call the h5diff tool
-#
-DIFFTEST()
-{
-    PRINT_H5DIFF  $@
-    (
-  cd $TESTDIR
-  $RUNSERIAL $H5DIFF_BIN "$@" -q
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-         echo "*FAILED*"
-         nerrors="`expr $nerrors + 1`"
-    else
-         echo " PASSED"
-    fi
-
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Verifying".
-#
-PRINT_H5IMPORT() {
- SPACES="                                                               "
- echo " Running h5import $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Call the h5import tool
-#
-IMPORTTEST()
-{
-    # remove the output hdf5 file if it exists
-    hdf5_file="$TESTDIR/$5"
-    if [ -f $hdf5_file ]; then
-     rm -f $hdf5_file
-    fi
-
-    PRINT_H5IMPORT  $@
-    (
-  cd $TESTDIR
-  $RUNSERIAL $H5IMPORT_BIN "$@"
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-         echo "*FAILED*"
-         nerrors="`expr $nerrors + 1`"
-    else
-         echo " PASSED"
-    fi
-
-}
-
-
-##############################################################################
-##############################################################################
-###        T H E   T E S T S                                               ###
-##############################################################################
-##############################################################################
-# prepare for test
-COPY_TESTFILES_TO_TESTDIR
-
-TOOLTEST_HELP h5dump-help.txt -h
-
-# test data output redirection
-TOOLTEST tnoddl.ddl --enable-error-stack --ddl -y packedbits.h5
-TOOLTEST tnodata.ddl --enable-error-stack --output packedbits.h5
-TOOLTEST tnoattrddl.ddl --enable-error-stack -O -y tattr.h5
-TOOLTEST tnoattrdata.ddl --enable-error-stack -A -o tattr.h5
-TOOLTEST2 trawdatafile.exp --enable-error-stack -y -o trawdatafile.txt packedbits.h5
-TOOLTEST2 tnoddlfile.exp --enable-error-stack -O -y -o tnoddlfile.txt packedbits.h5
-TOOLTEST2A twithddlfile.exp twithddl.exp --enable-error-stack --ddl=twithddl.txt -y -o twithddlfile.txt packedbits.h5
-TOOLTEST2 trawssetfile.exp --enable-error-stack -d "/dset1[1,1;;;]" -y -o trawssetfile.txt tdset.h5
-
-# test for maximum display datasets
-TOOLTEST twidedisplay.ddl --enable-error-stack -w0 packedbits.h5
-
-# test for signed/unsigned datasets
-TOOLTEST packedbits.ddl --enable-error-stack packedbits.h5
-# test for compound signed/unsigned datasets
-TOOLTEST tcmpdintsize.ddl --enable-error-stack tcmpdintsize.h5
-# test for signed/unsigned scalar datasets
-TOOLTEST tscalarintsize.ddl --enable-error-stack tscalarintsize.h5
-# test for signed/unsigned attributes
-TOOLTEST tattrintsize.ddl --enable-error-stack tattrintsize.h5
-# test for compound signed/unsigned attributes
-TOOLTEST tcmpdattrintsize.ddl --enable-error-stack tcmpdattrintsize.h5
-# test for signed/unsigned scalar attributes
-TOOLTEST tscalarattrintsize.ddl --enable-error-stack tscalarattrintsize.h5
-# test for signed/unsigned scalar datasets with attributes
-TOOLTEST tscalarintattrsize.ddl --enable-error-stack tscalarintattrsize.h5
-# test for signed/unsigned datasets attributes
-TOOLTEST tintsattrs.ddl --enable-error-stack tintsattrs.h5
-# test for string scalar dataset attribute
-TOOLTEST tscalarstring.ddl --enable-error-stack tscalarstring.h5
-# test for displaying groups
-TOOLTEST tgroup-1.ddl --enable-error-stack tgroup.h5
-# test for displaying the selected groups
-TOOLTEST4 tgroup-2.ddl --enable-error-stack --group=/g2 --group / -g /y tgroup.h5
-
-# test for displaying simple space datasets
-TOOLTEST tdset-1.ddl --enable-error-stack tdset.h5
-# test for displaying selected datasets
-TOOLTEST4 tdset-2.ddl --enable-error-stack -H -d dset1 -d /dset2 --dataset=dset3 tdset.h5
-
-# test for displaying attributes
-TOOLTEST tattr-1.ddl --enable-error-stack tattr.h5
-# test for displaying the selected attributes of string type and scalar space
-TOOLTEST tattr-2.ddl --enable-error-stack -a "/\/attr1" --attribute /attr4 --attribute=/attr5 tattr.h5
-TOOLTEST tattr-2.ddl --enable-error-stack -N "/\/attr1" --any_path /attr4 --any_path=/attr5 tattr.h5
-# test for header and error messages
-TOOLTEST4 tattr-3.ddl --enable-error-stack --header -a /attr2 --attribute=/attr tattr.h5
-# test for displaying at least 9 attributes on root from a BE machine
-TOOLTEST tattr-4_be.ddl --enable-error-stack tattr4_be.h5
-# test for displaying attributes in shared datatype (also in group and dataset)
-TOOLTEST tnamed_dtype_attr.ddl --enable-error-stack tnamed_dtype_attr.h5
-
-# test for displaying soft links and user-defined links
-TOOLTEST tslink-1.ddl --enable-error-stack tslink.h5
-TOOLTEST tudlink-1.ddl --enable-error-stack tudlink.h5
-# test for displaying the selected link
-TOOLTEST tslink-2.ddl --enable-error-stack -l slink2 tslink.h5
-TOOLTEST tslink-2.ddl --enable-error-stack -N slink2 tslink.h5
-TOOLTEST tudlink-2.ddl --enable-error-stack -l udlink2 tudlink.h5
-# test for displaying dangling soft links
-TOOLTEST4 tslink-D.ddl --enable-error-stack -d /slink1 tslink.h5
-
-# tests for hard links
-TOOLTEST thlink-1.ddl --enable-error-stack thlink.h5
-TOOLTEST thlink-2.ddl --enable-error-stack -d /g1/dset2 --dataset /dset1 --dataset=/g1/g1.1/dset3 thlink.h5
-TOOLTEST thlink-3.ddl --enable-error-stack -d /g1/g1.1/dset3 --dataset /g1/dset2 --dataset=/dset1 thlink.h5
-TOOLTEST thlink-4.ddl --enable-error-stack -g /g1 thlink.h5
-TOOLTEST thlink-4.ddl --enable-error-stack -N /g1 thlink.h5
-TOOLTEST thlink-5.ddl --enable-error-stack -d /dset1 -g /g2 -d /g1/dset2 thlink.h5
-TOOLTEST thlink-5.ddl --enable-error-stack -N /dset1 -N /g2 -N /g1/dset2 thlink.h5
-
-# tests for compound data types
-TOOLTEST tcomp-1.ddl --enable-error-stack tcompound.h5
-# test for named data types
-TOOLTEST tcomp-2.ddl --enable-error-stack -t /type1 --datatype /type2 --datatype=/group1/type3 tcompound.h5
-TOOLTEST tcomp-2.ddl --enable-error-stack -N /type1 --any_path /type2 --any_path=/group1/type3 tcompound.h5
-# test for unamed type
-TOOLTEST4 tcomp-3.ddl --enable-error-stack -t /#6632 -g /group2 tcompound.h5
-# test complicated compound datatype
-TOOLTEST tcomp-4.ddl --enable-error-stack tcompound_complex.h5
-TOOLTEST tcompound_complex.ddl --enable-error-stack tcompound_complex2.h5
-# tests for bitfields and opaque data types
-TOOLTEST tbitnopaque.ddl --enable-error-stack tbitnopaque.h5
-
-#test for the nested compound type
-TOOLTEST tnestcomp-1.ddl --enable-error-stack tnestedcomp.h5
-TOOLTEST tnestedcmpddt.ddl --enable-error-stack tnestedcmpddt.h5
-
-# test for options
-TOOLTEST4 tall-1.ddl --enable-error-stack tall.h5
-TOOLTEST tall-2.ddl --enable-error-stack --header -g /g1/g1.1 -a attr2 tall.h5
-TOOLTEST tall-3.ddl --enable-error-stack -d /g2/dset2.1 -l /g1/g1.2/g1.2.1/slink tall.h5
-TOOLTEST tall-3.ddl --enable-error-stack -N /g2/dset2.1 -N /g1/g1.2/g1.2.1/slink tall.h5
-TOOLTEST tall-7.ddl --enable-error-stack -a attr1 tall.h5
-TOOLTEST tall-7N.ddl --enable-error-stack -N attr1 tall.h5
-
-# test for loop detection
-TOOLTEST tloop-1.ddl --enable-error-stack tloop.h5
-
-# test for string
-TOOLTEST tstr-1.ddl --enable-error-stack tstr.h5
-TOOLTEST tstr-2.ddl --enable-error-stack tstr2.h5
-
-# test for file created by Lib SAF team
-TOOLTEST tsaf.ddl --enable-error-stack tsaf.h5
-
-# test for file with variable length data
-TOOLTEST tvldtypes1.ddl --enable-error-stack tvldtypes1.h5
-TOOLTEST tvldtypes2.ddl --enable-error-stack tvldtypes2.h5
-TOOLTEST tvldtypes3.ddl --enable-error-stack tvldtypes3.h5
-TOOLTEST tvldtypes4.ddl --enable-error-stack tvldtypes4.h5
-TOOLTEST tvldtypes5.ddl --enable-error-stack tvldtypes5.h5
-
-#test for file with variable length string data
-TOOLTEST tvlstr.ddl --enable-error-stack tvlstr.h5
-TOOLTEST tvlenstr_array.ddl --enable-error-stack tvlenstr_array.h5
-
-# test for files with array data
-TOOLTEST tarray1.ddl --enable-error-stack tarray1.h5
-# # added for bug# 2092 - tarray1_big.h
-TOOLTEST4 tarray1_big.ddl --enable-error-stack -R tarray1_big.h5
-TOOLTEST tarray2.ddl --enable-error-stack tarray2.h5
-TOOLTEST tarray3.ddl --enable-error-stack tarray3.h5
-TOOLTEST tarray4.ddl --enable-error-stack tarray4.h5
-TOOLTEST tarray5.ddl --enable-error-stack tarray5.h5
-TOOLTEST tarray6.ddl --enable-error-stack tarray6.h5
-TOOLTEST tarray7.ddl --enable-error-stack tarray7.h5
-TOOLTEST tarray8.ddl --enable-error-stack tarray8.h5
-
-# test for wildcards in filename (does not work with cmake)
-# inconsistent across platforms TOOLTEST3 tstarfile.ddl --enable-error-stack -H -d Dataset1 tarr*.h5
-#TOOLTEST4 tqmarkfile.ddl --enable-error-stack -H -d Dataset1 tarray?.h5
-TOOLTEST tmultifile.ddl --enable-error-stack -H -d Dataset1 tarray2.h5 tarray3.h5 tarray4.h5 tarray5.h5 tarray6.h5 tarray7.h5
-
-# test for files with empty data
-TOOLTEST tempty.ddl --enable-error-stack tempty.h5
-
-# test for files with groups that have comments
-TOOLTEST tgrp_comments.ddl --enable-error-stack tgrp_comments.h5
-
-# test the --filedriver flag
-TOOLTEST tsplit_file.ddl --enable-error-stack --filedriver=split tsplit_file
-TOOLTEST tfamily.ddl --enable-error-stack --filedriver=family tfamily%05d.h5
-TOOLTEST tmulti.ddl --enable-error-stack --filedriver=multi tmulti
-
-# test for files with group names which reach > 1024 bytes in size
-TOOLTEST tlarge_objname.ddl --enable-error-stack -w157 tlarge_objname.h5
-
-# test '-A' to suppress data but print attr's
-TOOLTEST4 tall-2A.ddl --enable-error-stack -A tall.h5
-
-# test '-A' to suppress attr's but print data
-TOOLTEST4 tall-2A0.ddl --enable-error-stack -A 0 tall.h5
-
-# test '-r' to print attributes in ASCII instead of decimal
-TOOLTEST4 tall-2B.ddl --enable-error-stack -A -r tall.h5
-
-# test Subsetting
-TOOLTEST tall-4s.ddl --enable-error-stack --dataset=/g1/g1.1/dset1.1.1 --start=1,1 --stride=2,3 --count=3,2 --block=1,1 tall.h5
-TOOLTEST tall-5s.ddl --enable-error-stack -d "/g1/g1.1/dset1.1.2[0;2;10;]" tall.h5
-TOOLTEST tdset-3s.ddl --enable-error-stack -d "/dset1[1,1;;;]" tdset.h5
-TOOLTEST tno-subset.ddl --enable-error-stack --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5
-
-TOOLTEST tints4dimsCount2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -c 2,2,2,2 tints4dims.h5
-TOOLTEST tints4dimsBlock2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -c 1,1,1,1 -k 2,2,2,2 tints4dims.h5
-TOOLTEST tints4dimsStride2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,2,2 -c 2,2,2,2 tints4dims.h5
-TOOLTEST tints4dimsCountEq.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,1,1 -k 1,2,1,1 -c 2,2,4,4 tints4dims.h5
-TOOLTEST tints4dimsBlockEq.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,1,1 -c 2,2,1,1 -k 1,2,4,4 tints4dims.h5
-
-# test printing characters in ASCII instead of decimal
-TOOLTEST tchar1.ddl --enable-error-stack -r tchar.h5
-
-# test datatypes in ASCII and UTF8
-TOOLTEST charsets.ddl --enable-error-stack charsets.h5
-
-# rev. 2004
-
-# tests for super block
-TOOLTEST tboot1.ddl --enable-error-stack -H -B -d dset tfcontents1.h5
-TOOLTEST tboot2.ddl --enable-error-stack -B tfcontents2.h5
-TOOLTEST tboot2A.ddl --enable-error-stack --boot-block tfcontents2.h5
-TOOLTEST tboot2B.ddl --enable-error-stack --superblock tfcontents2.h5
-TOOLTEST file_space.ddl --enable-error-stack -B file_space.h5
-
-# test -p with a non existing dataset
-TOOLTEST4 tperror.ddl --enable-error-stack -p -d bogus tfcontents1.h5
-
-# test for file contents
-TOOLTEST tcontents.ddl --enable-error-stack -n tfcontents1.h5
-TOOLTEST tordercontents1.ddl --enable-error-stack -n --sort_by=name --sort_order=ascending tfcontents1.h5
-TOOLTEST tordercontents2.ddl --enable-error-stack -n --sort_by=name --sort_order=descending tfcontents1.h5
-TOOLTEST tattrcontents1.ddl --enable-error-stack -n 1 --sort_order=ascending tall.h5
-TOOLTEST tattrcontents2.ddl --enable-error-stack -n 1 --sort_order=descending tall.h5
-
-# tests for storage layout
-# compact
-TOOLTEST tcompact.ddl --enable-error-stack -H -p -d compact tfilters.h5
-# contiguous
-TOOLTEST tcontiguos.ddl --enable-error-stack -H -p -d contiguous tfilters.h5
-# chunked
-TOOLTEST tchunked.ddl --enable-error-stack -H -p -d chunked tfilters.h5
-# external
-TOOLTEST texternal.ddl --enable-error-stack -H -p -d external tfilters.h5
-
-# fill values
-TOOLTEST tfill.ddl --enable-error-stack -p tfvalues.h5
-
-# several datatype, with references , print path
-TOOLTEST treference.ddl --enable-error-stack tattr2.h5
-
-# escape/not escape non printable characters
-TOOLTEST tstringe.ddl --enable-error-stack -e tstr3.h5
-TOOLTEST tstring.ddl --enable-error-stack tstr3.h5
-# char data as ASCII with non escape
-TOOLTEST tstring2.ddl --enable-error-stack -r -d str4 tstr3.h5
-
-# array indices print/not print
-TOOLTEST tindicesyes.ddl --enable-error-stack taindices.h5
-TOOLTEST tindicesno.ddl --enable-error-stack -y taindices.h5
-
-########## array indices with subsetting
-# 1D case
-TOOLTEST tindicessub1.ddl --enable-error-stack -d 1d -s 1 -S 10 -c 2  -k 3 taindices.h5
-
-# 2D case
-TOOLTEST tindicessub2.ddl --enable-error-stack -d 2d -s 1,2  -S 3,3 -c 3,2 -k 2,2 taindices.h5
-
-# 3D case
-TOOLTEST tindicessub3.ddl --enable-error-stack -d 3d -s 0,1,2 -S 1,3,3 -c 2,2,2  -k 1,2,2  taindices.h5
-
-# 4D case
-TOOLTEST tindicessub4.ddl --enable-error-stack -d 4d -s 0,0,1,2  -c 2,2,3,2 -S 1,1,3,3 -k 1,1,2,2  taindices.h5
-
-#Exceed the dimensions for subsetting
-TOOLTEST texceedsubstart.ddl --enable-error-stack -d 1d -s 1,3 taindices.h5
-TOOLTEST texceedsubcount.ddl --enable-error-stack -d 1d -c 1,3 taindices.h5
-TOOLTEST texceedsubstride.ddl --enable-error-stack -d 1d -S 1,3 taindices.h5
-TOOLTEST texceedsubblock.ddl --enable-error-stack -d 1d -k 1,3 taindices.h5
-
-
-# tests for filters
-# SZIP
-TOOLTEST tszip.ddl --enable-error-stack -H -p -d szip tfilters.h5
-# deflate
-TOOLTEST tdeflate.ddl --enable-error-stack -H -p -d deflate tfilters.h5
-# shuffle
-TOOLTEST tshuffle.ddl --enable-error-stack -H -p -d shuffle tfilters.h5
-# fletcher32
-TOOLTEST tfletcher32.ddl --enable-error-stack -H -p -d fletcher32  tfilters.h5
-# nbit
-TOOLTEST tnbit.ddl --enable-error-stack -H -p -d nbit  tfilters.h5
-# scaleoffset
-TOOLTEST tscaleoffset.ddl --enable-error-stack -H -p -d scaleoffset  tfilters.h5
-# all
-TOOLTEST tallfilters.ddl --enable-error-stack -H -p -d all  tfilters.h5
-# user defined
-TOOLTEST tuserfilter.ddl --enable-error-stack -H  -p -d myfilter  tfilters.h5
-
-if test $USE_FILTER_DEFLATE = "yes" ; then
-  # data read internal filters
-  TOOLTEST treadintfilter.ddl --enable-error-stack -d deflate -d shuffle -d fletcher32 -d nbit -d scaleoffset tfilters.h5
-  if test $USE_FILTER_SZIP = "yes"; then
-    # data read
-    TOOLTEST treadfilter.ddl --enable-error-stack -d all -d szip tfilters.h5
-  fi
-fi
-
-# test for displaying objects with very long names
-TOOLTEST tlonglinks.ddl --enable-error-stack tlonglinks.h5
-
-# dimensions over 4GB, print boundary
-TOOLTEST tbigdims.ddl --enable-error-stack -d dset4gb -s 4294967284 -c 22 tbigdims.h5
-
-# hyperslab read
-TOOLTEST thyperslab.ddl --enable-error-stack thyperslab.h5
-
-
-#
-
-# test for displaying dataset and attribute of null space
-TOOLTEST tnullspace.ddl --enable-error-stack tnullspace.h5
-
-# test for displaying dataset and attribute of space with 0 dimension size
-TOOLTEST zerodim.ddl --enable-error-stack zerodim.h5
-
-# test for long double (some systems do not have long double)
-#TOOLTEST tldouble.ddl --enable-error-stack tldouble.h5
-
-# test for vms
-TOOLTEST tvms.ddl --enable-error-stack tvms.h5
-
-# test for binary output
-TOOLTEST tbin1.ddl --enable-error-stack -d integer -o out1.bin -b LE tbinary.h5
-
-# test for string binary output
-TOOLTEST2B tstr2bin2.exp --enable-error-stack -d /g2/dset2 -b -o tstr2bin2.txt tstr2.h5
-TOOLTEST2B tstr2bin6.exp --enable-error-stack -d /g6/dset6 -b -o tstr2bin6.txt tstr2.h5
-
-# NATIVE default. the NATIVE test can be validated with h5import/h5diff
-TOOLTEST   tbin1.ddl --enable-error-stack -d integer -o out1.bin  -b  tbinary.h5
-IMPORTTEST out1.bin -c out3.h5import -o out1.h5
-DIFFTEST   tbinary.h5 out1.h5 /integer /integer
-# Same but use h5dump as input to h5import
-IMPORTTEST out1.bin -c tbin1.ddl -o out1D.h5
-DIFFTEST   tbinary.h5 out1D.h5 /integer /integer
-
-TOOLTEST   tbin2.ddl --enable-error-stack -b BE -d float  -o out2.bin  tbinary.h5
-
-# the NATIVE test can be validated with h5import/h5diff
-TOOLTEST   tbin3.ddl --enable-error-stack -d integer -o out3.bin -b NATIVE tbinary.h5
-IMPORTTEST out3.bin -c out3.h5import -o out3.h5
-DIFFTEST   tbinary.h5 out3.h5 /integer /integer
-# Same but use h5dump as input to h5import
-IMPORTTEST out3.bin -c tbin3.ddl -o out3D.h5
-DIFFTEST   tbinary.h5 out3D.h5 /integer /integer
-
-TOOLTEST   tbin4.ddl --enable-error-stack -d double  -b FILE -o out4.bin    tbinary.h5
-
-# Clean up binary output files
-if test -z "$HDF5_NOCLEANUP"; then
- rm -f out[1-4].bin
- rm -f out1.h5
- rm -f out3.h5
-fi
-
-# test for dataset region references
-TOOLTEST  tdatareg.ddl --enable-error-stack tdatareg.h5
-TOOLTEST4 tdataregR.ddl --enable-error-stack -R tdatareg.h5
-TOOLTEST  tattrreg.ddl --enable-error-stack tattrreg.h5
-TOOLTEST4 tattrregR.ddl --enable-error-stack -R tattrreg.h5
-TOOLTEST2 tbinregR.exp --enable-error-stack -d /Dataset1 -s 0 -R -y -o tbinregR.txt    tdatareg.h5
-
-# Clean up text output files
-if test -z "$HDF5_NOCLEANUP"; then
- rm -f tbinregR.txt
-fi
-
-# tests for group creation order
-# "1" tracked, "2" name, root tracked
-TOOLTEST tordergr1.ddl --enable-error-stack --group=1 --sort_by=creation_order --sort_order=ascending tordergr.h5
-TOOLTEST tordergr2.ddl --enable-error-stack --group=1 --sort_by=creation_order --sort_order=descending tordergr.h5
-TOOLTEST tordergr3.ddl --enable-error-stack -g 2 -q name -z ascending tordergr.h5
-TOOLTEST tordergr4.ddl --enable-error-stack -g 2 -q name -z descending tordergr.h5
-TOOLTEST tordergr5.ddl --enable-error-stack -q creation_order tordergr.h5
-
-# tests for attribute order
-TOOLTEST torderattr1.ddl --enable-error-stack -H --sort_by=name --sort_order=ascending torderattr.h5
-TOOLTEST torderattr2.ddl --enable-error-stack -H --sort_by=name --sort_order=descending torderattr.h5
-TOOLTEST torderattr3.ddl --enable-error-stack -H --sort_by=creation_order --sort_order=ascending torderattr.h5
-TOOLTEST torderattr4.ddl --enable-error-stack -H --sort_by=creation_order --sort_order=descending torderattr.h5
-
-# tests for link references and order
-TOOLTEST4 torderlinks1.ddl --enable-error-stack --sort_by=name --sort_order=ascending tfcontents1.h5
-TOOLTEST4 torderlinks2.ddl --enable-error-stack --sort_by=name --sort_order=descending tfcontents1.h5
-
-# tests for floating point user defined printf format
-TOOLTEST tfpformat.ddl --enable-error-stack -m %.7f tfpformat.h5
-
-# tests for traversal of external links
-TOOLTEST4 textlinksrc.ddl --enable-error-stack textlinksrc.h5
-TOOLTEST4 textlinkfar.ddl --enable-error-stack textlinkfar.h5
-
-# test for dangling external links
-TOOLTEST4 textlink.ddl --enable-error-stack textlink.h5
-
-# test for error stack display (BZ2048)
-TOOLTEST5 filter_fail.ddl --enable-error-stack filter_fail.h5
-
-# test for -o -y for dataset with attributes
-TOOLTEST2 tall-6.exp --enable-error-stack -y -o tall-6.txt -d /g1/g1.1/dset1.1.1 tall.h5
-
-# test for non-existing file
-TOOLTEST3 non_existing.ddl --enable-error-stack tgroup.h5 non_existing.h5
-
-# Clean up temporary files/directories
-CLEAN_TESTFILES_AND_TESTDIR
-
-# Report test results and exit
-if test $nerrors -eq 0 ; then
-    echo "All $TESTNAME tests passed."
-    exit $EXIT_SUCCESS
-else
-    echo "$TESTNAME tests failed with $nerrors errors."
-    exit $EXIT_FAILURE
-fi