[svn-r22390] Break out the packed bits tests into a new script.

reconfigure on jam
Tested: local linux

1 files changed, 495 insertions, 0 deletions

diff --git a/tools/h5dump/testh5dumppbits.sh.in b/tools/h5dump/testh5dumppbits.sh.in
new file mode 100644
index 0000000..393fcc1
--- /dev/null
+++ b/tools/h5dump/testh5dumppbits.sh.in
@@ -0,0 +1,495 @@
+#! /bin/sh
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# Tests for the h5dump tool with packed bits type files
+
+# Determine which filters are available
+USE_FILTER_SZIP="@USE_FILTER_SZIP@"
+USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
+USE_FILTER_SHUFFLE="@USE_FILTER_SHUFFLE@"
+USE_FILTER_FLETCHER32="@USE_FILTER_FLETCHER32@"
+USE_FILTER_NBIT="@USE_FILTER_NBIT@"
+USE_FILTER_SCALEOFFSET="@USE_FILTER_SCALEOFFSET@"
+
+TESTNAME=h5dump
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+DUMPER=h5dump                     # The tool name
+DUMPER_BIN=`pwd`/$DUMPER          # The path of the tool binary
+
+H5DIFF=../h5diff/h5diff           # The h5diff tool name 
+H5DIFF_BIN=`pwd`/$H5DIFF          # The path of the h5diff  tool binary
+
+H5IMPORT=../h5import/h5import     # The h5import tool name 
+H5IMPORT_BIN=`pwd`/$H5IMPORT      # The path of the h5import  tool binary
+
+
+CMP='cmp -s'
+DIFF='diff -c'
+CP='cp'
+
+nerrors=0
+verbose=yes
+
+# The build (current) directory might be different than the source directory.
+if test -z "$srcdir"; then
+   srcdir=.
+fi
+# source dirs
+SRC_TOOLS="$srcdir/../"
+
+SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
+# testfiles source dirs for tools
+SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
+SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
+SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
+SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
+SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
+SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
+
+TESTDIR=./testfiles
+test -d $TESTDIR || mkdir $TESTDIR
+
+######################################################################
+# test files
+# --------------------------------------------------------------------
+# All the test files copy from source directory to test directory
+# NOTE: Keep this framework to add/remove test files.
+#       Any test files from other tools can be used in this framework.
+#       This list are also used for checking exist.
+#       Comment '#' without space can be used.
+# --------------------------------------------------------------------
+LIST_HDF5_TEST_FILES="
+$SRC_H5DUMP_TESTFILES/packedbits.h5
+"
+
+LIST_OTHER_TEST_FILES="
+$SRC_H5DUMP_TESTFILES/tnofilename-with-packed-bits.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsArray.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsCompound.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsIncomplete.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsLengthExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsCharLengthExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsIntLengthExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsLongLengthExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsLengthPositive.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsMax.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsMaxExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsOffsetExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsCharOffsetExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsIntOffsetExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsLongOffsetExceeded.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsOffsetNegative.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsOverlapped.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSigned.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsigned.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedInt.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLong.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedWhole.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedWhole.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedIntWhole.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedIntWhole.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLongWhole.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongWhole.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole1.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole1.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole63.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole63.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSigned4.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsigned4.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedInt8.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt8.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLong16.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong16.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong32.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong32.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSigned2.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsigned2.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedInt4.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt4.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLong8.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong8.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong16.ddl
+$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong16.ddl
+"
+
+#
+# copy test files and expected output files from source dirs to test dir
+#
+COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES $LIST_HDF5_TEST_FILES_XML $LIST_OTHER_TEST_FILES_XML"
+
+COPY_TESTFILES_TO_TESTDIR()
+{
+    # copy test files. Used -f to make sure get a new copy
+    for tstfile in $COPY_TESTFILES
+    do
+        # ignore '#' comment
+        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
+        RET=$?
+        if [ $RET -eq 1 ]; then
+            if [ -a $tstfile ]; then
+                $CP -f $tstfile $TESTDIR
+            else
+                echo "Error: FAILED to copy $tstfile"
+                echo "       $tstfile doesn't exist!"
+                exit $EXIT_FAILURE
+            fi
+        fi
+    done
+}
+
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Testing".
+#
+TESTING() {
+   SPACES="                                                               "
+   echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Source in the output filter function definitions.
+. $srcdir/../../bin/output_filter.sh
+
+# Run a test and print PASS or *FAIL*.  If a test fails then increment
+# the `nerrors' global variable and (if $verbose is set) display the
+# difference between the actual output and the expected output. The
+# expected output is given as the first argument to this function and
+# the actual output file is calculated by replacing the `.ddl' with
+# `.out'.  The actual output is not removed if $HDF5_NOCLEANUP has a
+# non-zero value.
+#
+TOOLTEST() {
+    expect="$TESTDIR/$1"
+    actual="$TESTDIR/`basename $1 .ddl`.out"
+    actual_err="$TESTDIR/`basename $1 .ddl`.err"
+    actual_sav=${actual}-sav
+    actual_err_sav=${actual_err}-sav
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+    cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+
+    # save actual and actual_err in case they are needed later.
+    cp $actual $actual_sav
+    STDOUT_FILTER $actual
+    cp $actual_err $actual_err_sav
+    STDERR_FILTER $actual_err
+    cat $actual_err >> $actual
+
+  if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $CMP $expect $actual; then
+     echo " PASSED"
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+   nerrors="`expr $nerrors + 1`"
+   test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+   rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext
+    fi
+
+}
+
+
+# same as TOOLTEST1 but compares generated file to expected output
+#                   and compares the generated data file to the expected data file
+# used for the binary tests that expect a full path in -o without -b
+TOOLTEST2() {
+
+    expectdata="$TESTDIR/$1"
+    expect="$TESTDIR/`basename $1 .exp`.ddl"
+    actualdata="$TESTDIR/`basename $1 .exp`.txt"
+    actual="$TESTDIR/`basename $1 .exp`.out"
+    actual_err="$TESTDIR/`basename $1 .exp`.err"
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+    cat $actual_err >> $actual
+
+    if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $CMP $expect $actual; then
+      if [ ! -f $expectdata ]; then
+      # Create the expect data file if it doesn't yet exist.
+        echo " CREATED"
+        cp $actualdata $expectdata
+      elif $CMP $expectdata $actualdata; then
+        echo " PASSED"
+      else
+        echo "*FAILED*"
+        echo "    Expected datafile (*.exp) differs from actual datafile (*.txt)"
+        nerrors="`expr $nerrors + 1`"
+        test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/    /'
+      fi
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+    
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+     rm -f $actual $actualdata $actual_err
+    fi
+
+}
+
+# same as TOOLTEST but filters error stack outp
+# Extract file name, line number, version and thread IDs because they may be different
+TOOLTEST3() {
+
+    expect="$TESTDIR/$1"
+    actual="$TESTDIR/`basename $1 .ddl`.out"
+    actual_err="$TESTDIR/`basename $1 .ddl`.err"
+    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
+    actual_sav=${actual}-sav
+    actual_err_sav=${actual_err}-sav
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+
+    # save actual and actual_err in case they are needed later.
+    cp $actual $actual_sav
+    STDOUT_FILTER $actual
+    cp $actual_err $actual_err_sav
+    STDERR_FILTER $actual_err
+
+    # Extract file name, line number, version and thread IDs because they may be different
+    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
+        -e 's/line [0-9]*/line (number)/' \
+        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
+        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
+        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
+        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
+     $actual_err > $actual_ext
+    cat $actual_ext >> $actual
+
+    if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $CMP $expect $actual; then
+     echo " PASSED"
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+   rm -f $actual $actual_err $actual_sav $actual_err_sav
+    fi
+
+}
+
+# Print a "SKIP" message
+SKIP() {
+   TESTING $DUMPER $@
+    echo  " -SKIP-"
+}
+  
+# Print a line-line message left justified in a field of 70 characters
+#
+PRINT_H5DIFF() {
+ SPACES="                                                               "
+ echo " Running h5diff $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+
+# Call the h5diff tool
+#
+DIFFTEST() 
+{
+    PRINT_H5DIFF  $@
+    (
+  cd $TESTDIR
+  $RUNSERIAL $H5DIFF_BIN "$@" -q
+    )
+    RET=$?
+    if [ $RET != 0 ] ; then
+         echo "*FAILED*"
+         nerrors="`expr $nerrors + 1`"
+    else
+         echo " PASSED"
+    fi
+        
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+PRINT_H5IMPORT() {
+ SPACES="                                                               "
+ echo " Running h5import $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Call the h5import tool
+#
+IMPORTTEST() 
+{
+    # remove the output hdf5 file if it exists
+    hdf5_file="$TESTDIR/$5"
+    if [ -f $hdf5_file ]; then
+     rm -f $hdf5_file
+    fi
+
+    PRINT_H5IMPORT  $@
+    (
+  cd $TESTDIR
+  $RUNSERIAL $H5IMPORT_BIN "$@" 
+    )
+    RET=$?
+    if [ $RET != 0 ] ; then
+         echo "*FAILED*"
+         nerrors="`expr $nerrors + 1`"
+    else
+         echo " PASSED"
+    fi
+        
+}
+
+
+##############################################################################
+##############################################################################
+###        T H E   T E S T S                                            ###
+##############################################################################
+##############################################################################
+# prepare for test
+COPY_TESTFILES_TO_TESTDIR
+
+####### test for dataset packed bits ######
+
+# test failure handling
+# Missing file name
+TOOLTEST tnofilename-with-packed-bits.ddl --enable-error-stack
+# Limits:
+# Maximum number of packed bits is 8 (for now).
+# Maximum integer size is 64 (for now).
+# Maximun Offset is 63 (Maximum size - 1).
+# Maximum Offset+Length is 64 (Maximum size).
+# Tests:
+# Normal operation on both signed and unsigned int datasets.
+# Sanity check
+# Their rawdata output should be the same.
+TOOLTEST tpbitsSignedWhole.ddl --enable-error-stack -d /DS08BITS -M 0,8 packedbits.h5
+TOOLTEST tpbitsUnsignedWhole.ddl --enable-error-stack -d /DU08BITS -M 0,8 packedbits.h5
+TOOLTEST tpbitsSignedIntWhole.ddl --enable-error-stack -d /DS16BITS -M 0,16 packedbits.h5
+TOOLTEST tpbitsUnsignedIntWhole.ddl --enable-error-stack -d /DU16BITS -M 0,16 packedbits.h5
+TOOLTEST tpbitsSignedLongWhole.ddl --enable-error-stack -d /DS32BITS -M 0,32 packedbits.h5
+TOOLTEST tpbitsUnsignedLongWhole.ddl --enable-error-stack -d /DU32BITS -M 0,32 packedbits.h5
+TOOLTEST tpbitsSignedLongLongWhole.ddl --enable-error-stack -d /DS64BITS -M 0,64 packedbits.h5
+TOOLTEST tpbitsUnsignedLongLongWhole.ddl --enable-error-stack -d /DU64BITS -M 0,64 packedbits.h5
+TOOLTEST tpbitsSignedLongLongWhole63.ddl --enable-error-stack -d /DS64BITS -M 0,63 packedbits.h5
+TOOLTEST tpbitsUnsignedLongLongWhole63.ddl --enable-error-stack -d /DU64BITS -M 0,63 packedbits.h5
+TOOLTEST tpbitsSignedLongLongWhole1.ddl --enable-error-stack -d /DS64BITS -M 1,63 packedbits.h5
+TOOLTEST tpbitsUnsignedLongLongWhole1.ddl --enable-error-stack -d /DU64BITS -M 1,63 packedbits.h5
+# Half sections
+TOOLTEST tpbitsSigned4.ddl --enable-error-stack -d /DS08BITS -M 0,4,4,4 packedbits.h5
+TOOLTEST tpbitsUnsigned4.ddl --enable-error-stack -d /DU08BITS -M 0,4,4,4 packedbits.h5
+TOOLTEST tpbitsSignedInt8.ddl --enable-error-stack -d /DS16BITS -M 0,8,8,8 packedbits.h5
+TOOLTEST tpbitsUnsignedInt8.ddl --enable-error-stack -d /DU16BITS -M 0,8,8,8 packedbits.h5
+TOOLTEST tpbitsSignedLong16.ddl --enable-error-stack -d /DS32BITS -M 0,16,16,16 packedbits.h5
+TOOLTEST tpbitsUnsignedLong16.ddl --enable-error-stack -d /DU32BITS -M 0,16,16,16 packedbits.h5
+TOOLTEST tpbitsSignedLongLong32.ddl --enable-error-stack -d /DS64BITS -M 0,32,32,32 packedbits.h5
+TOOLTEST tpbitsUnsignedLongLong32.ddl --enable-error-stack -d /DU64BITS -M 0,32,32,32 packedbits.h5
+# Quarter sections
+TOOLTEST tpbitsSigned2.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,2,4,2,6,2 packedbits.h5
+TOOLTEST tpbitsUnsigned2.ddl --enable-error-stack -d /DU08BITS -M 0,2,2,2,4,2,6,2 packedbits.h5
+TOOLTEST tpbitsSignedInt4.ddl --enable-error-stack -d /DS16BITS -M 0,4,4,4,8,4,12,4 packedbits.h5
+TOOLTEST tpbitsUnsignedInt4.ddl --enable-error-stack -d /DU16BITS -M 0,4,4,4,8,4,12,4 packedbits.h5
+TOOLTEST tpbitsSignedLong8.ddl --enable-error-stack -d /DS32BITS -M 0,8,8,8,16,8,24,8 packedbits.h5
+TOOLTEST tpbitsUnsignedLong8.ddl --enable-error-stack -d /DU32BITS -M 0,8,8,8,16,8,24,8 packedbits.h5
+TOOLTEST tpbitsSignedLongLong16.ddl --enable-error-stack -d /DS64BITS -M 0,16,16,16,32,16,48,16 packedbits.h5
+TOOLTEST tpbitsUnsignedLongLong16.ddl --enable-error-stack -d /DU64BITS -M 0,16,16,16,32,16,48,16 packedbits.h5
+# Begin and End
+TOOLTEST tpbitsSigned.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,6 packedbits.h5
+TOOLTEST tpbitsUnsigned.ddl --enable-error-stack -d /DU08BITS -M 0,2,2,6 packedbits.h5
+TOOLTEST tpbitsSignedInt.ddl --enable-error-stack -d /DS16BITS -M 0,2,10,6 packedbits.h5
+TOOLTEST tpbitsUnsignedInt.ddl --enable-error-stack -d /DU16BITS -M 0,2,10,6 packedbits.h5
+TOOLTEST tpbitsSignedLong.ddl --enable-error-stack -d /DS32BITS -M 0,2,26,6 packedbits.h5
+TOOLTEST tpbitsUnsignedLong.ddl --enable-error-stack -d /DU32BITS -M 0,2,26,6 packedbits.h5
+TOOLTEST tpbitsSignedLongLong.ddl --enable-error-stack -d /DS64BITS -M 0,2,58,6 packedbits.h5
+TOOLTEST tpbitsUnsignedLongLong.ddl --enable-error-stack -d /DU64BITS -M 0,2,58,6 packedbits.h5
+# Overlapped packed bits.
+TOOLTEST tpbitsOverlapped.ddl --enable-error-stack -d /DS08BITS -M 0,1,1,1,2,1,0,3 packedbits.h5
+# Maximum number of packed bits.
+TOOLTEST tpbitsMax.ddl --enable-error-stack -d /DS08BITS -M 0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1 packedbits.h5
+# Compound type.
+TOOLTEST tpbitsCompound.ddl --enable-error-stack -d /dset1 -M 0,1,1,1 tcompound.h5
+# Array type.
+TOOLTEST tpbitsArray.ddl --enable-error-stack -d /Dataset1 -M 0,1,1,1 tarray1.h5
+# Test Error handling.
+# Too many packed bits requested. Max is 8 for now.
+TOOLTEST tpbitsMaxExceeded.ddl --enable-error-stack -d /DS08BITS -M 0,1,0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1 packedbits.h5
+# Offset too large. Max is 7 (8-1) for now.
+TOOLTEST tpbitsOffsetExceeded.ddl --enable-error-stack -d /DS08BITS -M 64,1 packedbits.h5
+TOOLTEST tpbitsCharOffsetExceeded.ddl --enable-error-stack -d /DS08BITS -M 8,1 packedbits.h5
+TOOLTEST tpbitsIntOffsetExceeded.ddl --enable-error-stack -d /DS16BITS -M 16,1 packedbits.h5
+TOOLTEST tpbitsLongOffsetExceeded.ddl --enable-error-stack -d /DS32BITS -M 32,1 packedbits.h5
+# Bad offset, must not be negative.
+TOOLTEST tpbitsOffsetNegative.ddl --enable-error-stack -d /DS08BITS -M -1,1 packedbits.h5
+# Bad length, must not be positive.
+TOOLTEST tpbitsLengthPositive.ddl --enable-error-stack -d /DS08BITS -M 4,0 packedbits.h5
+# Offset+Length is too large. Max is 8 for now.
+TOOLTEST tpbitsLengthExceeded.ddl --enable-error-stack -d /DS08BITS -M 37,28 packedbits.h5
+TOOLTEST tpbitsCharLengthExceeded.ddl --enable-error-stack -d /DS08BITS -M 2,7 packedbits.h5
+TOOLTEST tpbitsIntLengthExceeded.ddl --enable-error-stack -d /DS16BITS -M 10,7 packedbits.h5
+TOOLTEST tpbitsLongLengthExceeded.ddl --enable-error-stack -d /DS32BITS -M 26,7 packedbits.h5
+# Incomplete pair of packed bits request.
+TOOLTEST tpbitsIncomplete.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,1,0,2,2, packedbits.h5
+
+
+# Report test results and exit
+if test $nerrors -eq 0 ; then
+    echo "All $TESTNAME tests passed."
+    exit $EXIT_SUCCESS
+else
+    echo "$TESTNAME tests failed with $nerrors errors."
+    exit $EXIT_FAILURE
+fi