[svn-r22709] HDFFV-8129: reconfigured on jam, Remove overloading of autotools TESTS var, rename configure.in to configure.ac, convert test scripts from hard *.sh to configure managed *sh.in files.

Tested: h5committest

2 files changed, 20 insertions, 19 deletions

diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in
index 673b625..7aa4329 100644
--- a/tools/h5ls/Makefile.in
+++ b/tools/h5ls/Makefile.in
@@ -73,10 +73,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 	$(top_srcdir)/config/commence.am \
 	$(top_srcdir)/config/conclude.am
 bin_PROGRAMS = h5ls$(EXEEXT)
-TESTS = $(check_SCRIPTS)
+TESTS = $(TEST_SCRIPT)
 subdir = tools/h5ls
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
@@ -144,7 +144,7 @@ am__tty_colors_dummy = \
   am__color_tests=no
 am__tty_colors = $(am__tty_colors_dummy)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
+ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 
@@ -162,12 +162,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
 AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AS = @AS@
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
-AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
-AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
 BYTESEX = @BYTESEX@
 CC = @CC@
@@ -451,6 +448,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
 TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
@@ -815,7 +816,7 @@ help:
 # build files in this directory.
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
@@ -841,7 +842,7 @@ check-clean ::
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
 
 # make install-doc doesn't do anything outside of doc directory, but
 # Makefiles should recognize it.
@@ -865,7 +866,7 @@ check-install: installcheck
 # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
 # The timestamps give a rough idea how much time the tests use.
 #
-# Note that targets in TESTS (defined above) will be built when the user
+# Note that targets in chk_TESTS (defined above) will be built when the user
 # types 'make tests' or 'make check', but only programs in TEST_PROG,
 # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
 check-TESTS: test
@@ -875,7 +876,7 @@ test _test:
 	@$(MAKE) build-check-p
 
 # Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(TESTS)
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
 	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -965,7 +966,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
 	fi
 
 # Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(TESTS)
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
 	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -995,7 +996,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	fi
 
 # Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(TESTS)
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
 	@for vfd in $(VFD_LIST) dummy; do                                     \
 	    if test $$vfd != dummy; then                                      \
 	        echo "============================";                          \
diff --git a/tools/h5ls/testh5ls.sh.in b/tools/h5ls/testh5ls.sh.in
index 02819e2..0904f96 100644
--- a/tools/h5ls/testh5ls.sh.in
+++ b/tools/h5ls/testh5ls.sh.in
@@ -15,6 +15,8 @@
 #
 # Tests for the h5ls tool
 
+srcdir=@srcdir@
+
 TESTNAME=h5ls
 EXIT_SUCCESS=0
 EXIT_FAILURE=1
@@ -35,13 +37,11 @@ WORDS_BIGENDIAN="@WORDS_BIGENDIAN@"
 nerrors=0
 verbose=yes
 h5haveexitcode=yes      # default is yes
-# The build (current) directory might be different than the source directory.
-if test -z "$srcdir"; then
-    srcdir=.
-fi
+
 # source dirs
 SRC_TOOLS="$srcdir/.."
 SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
+
 # testfiles source dirs for tools
 SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
 SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"