Split tools into src and test - remove folders

1 files changed, 0 insertions, 1265 deletions

diff --git a/tools/h5repack/h5repack.sh.in b/tools/h5repack/h5repack.sh.in
deleted file mode 100644
index c2f0459..0000000
--- a/tools/h5repack/h5repack.sh.in
+++ /dev/null
@@ -1,1265 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tests for the h5repack tool
-#
-# Modification:
-#  Pedro Vicente Nunes, 11/15/2006
-#  Added $FILEN variables for file names
-#
-
-srcdir=@srcdir@
-
-USE_FILTER_SZIP="@USE_FILTER_SZIP@"
-USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
-
-TESTNAME=h5repack
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-H5REPACK=h5repack               # The tool name
-H5REPACK_BIN=`pwd`/$H5REPACK    # The path of the tool binary
-
-H5DIFF=../h5diff/h5diff         # The h5diff tool name
-H5DIFF_BIN=`pwd`/$H5DIFF        # The path of the h5diff tool binary
-
-H5DUMP=../h5dump/h5dump         # The h5dump tool name
-H5DUMP_BIN=`pwd`/$H5DUMP        # The path of the h5dump tool binary
-
-RM='rm -rf'
-CMP='cmp'
-DIFF='diff -c'
-GREP='grep'
-CP='cp'
-DIRNAME='dirname'
-LS='ls'
-AWK='awk'
-
-H5DETECTSZIP=testh5repack_detect_szip
-H5DETECTSZIP_BIN=`pwd`/$H5DETECTSZIP
-
-
-nerrors=0
-verbose=yes
-
-# source dirs
-SRC_TOOLS="$srcdir/.."
-SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
-
-# testfiles source dirs for tools
-SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
-SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
-SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
-SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
-SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
-SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
-
-TESTDIR=./testpack
-test -d $TESTDIR || mkdir $TESTDIR
-
-######################################################################
-# test files
-# --------------------------------------------------------------------
-# All the test files copy from source directory to test directory
-# NOTE: Keep this framework to add/remove test files.
-#       Any test files from other tools can be used in this framework.
-#       This list are also used for checking exist.
-#       Comment '#' without space can be used.
-# --------------------------------------------------------------------
-LIST_HDF5_TEST_FILES="
-$SRC_H5REPACK_TESTFILES/h5repack_attr.h5
-$SRC_H5REPACK_TESTFILES/h5repack_attr_refs.h5
-$SRC_H5REPACK_TESTFILES/h5repack_deflate.h5
-$SRC_H5REPACK_TESTFILES/h5repack_early.h5
-$SRC_H5REPACK_TESTFILES/h5repack_ext.h5
-$SRC_H5REPACK_TESTFILES/h5repack_fill.h5
-$SRC_H5REPACK_TESTFILES/h5repack_filters.h5
-$SRC_H5REPACK_TESTFILES/h5repack_fletcher.h5
-$SRC_H5REPACK_TESTFILES/h5repack_hlink.h5
-$SRC_H5REPACK_TESTFILES/h5repack_layout.h5
-$SRC_H5REPACK_TESTFILES/h5repack_layouto.h5
-$SRC_H5REPACK_TESTFILES/h5repack_layout2.h5
-$SRC_H5REPACK_TESTFILES/h5repack_layout3.h5
-$SRC_H5REPACK_TESTFILES/h5repack_named_dtypes.h5
-$SRC_H5REPACK_TESTFILES/h5repack_nested_8bit_enum.h5
-$SRC_H5REPACK_TESTFILES/h5repack_nested_8bit_enum_deflated.h5
-$SRC_H5REPACK_TESTFILES/h5repack_nbit.h5
-$SRC_H5REPACK_TESTFILES/h5repack_objs.h5
-$SRC_H5REPACK_TESTFILES/h5repack_refs.h5
-$SRC_H5REPACK_TESTFILES/h5repack_shuffle.h5
-$SRC_H5REPACK_TESTFILES/h5repack_soffset.h5
-$SRC_H5REPACK_TESTFILES/h5repack_szip.h5
-$SRC_H5DIFF_TESTFILES/h5diff_attr1.h5
-$SRC_TOOLS_TESTFILES/tfamily00000.h5
-$SRC_TOOLS_TESTFILES/tfamily00001.h5
-$SRC_TOOLS_TESTFILES/tfamily00002.h5
-$SRC_TOOLS_TESTFILES/tfamily00003.h5
-$SRC_TOOLS_TESTFILES/tfamily00004.h5
-$SRC_TOOLS_TESTFILES/tfamily00005.h5
-$SRC_TOOLS_TESTFILES/tfamily00006.h5
-$SRC_TOOLS_TESTFILES/tfamily00007.h5
-$SRC_TOOLS_TESTFILES/tfamily00008.h5
-$SRC_TOOLS_TESTFILES/tfamily00009.h5
-$SRC_TOOLS_TESTFILES/tfamily00010.h5
-$SRC_TOOLS_TESTFILES/vds/1_a.h5
-$SRC_TOOLS_TESTFILES/vds/1_b.h5
-$SRC_TOOLS_TESTFILES/vds/1_c.h5
-$SRC_TOOLS_TESTFILES/vds/1_d.h5
-$SRC_TOOLS_TESTFILES/vds/1_e.h5
-$SRC_TOOLS_TESTFILES/vds/1_f.h5
-$SRC_TOOLS_TESTFILES/vds/1_vds.h5
-$SRC_TOOLS_TESTFILES/vds/2_a.h5
-$SRC_TOOLS_TESTFILES/vds/2_b.h5
-$SRC_TOOLS_TESTFILES/vds/2_c.h5
-$SRC_TOOLS_TESTFILES/vds/2_d.h5
-$SRC_TOOLS_TESTFILES/vds/2_e.h5
-$SRC_TOOLS_TESTFILES/vds/2_vds.h5
-$SRC_TOOLS_TESTFILES/vds/3_1_vds.h5
-$SRC_TOOLS_TESTFILES/vds/3_2_vds.h5
-$SRC_TOOLS_TESTFILES/vds/4_0.h5
-$SRC_TOOLS_TESTFILES/vds/4_1.h5
-$SRC_TOOLS_TESTFILES/vds/4_2.h5
-$SRC_TOOLS_TESTFILES/vds/4_vds.h5
-$SRC_TOOLS_TESTFILES/vds/5_a.h5
-$SRC_TOOLS_TESTFILES/vds/5_b.h5
-$SRC_TOOLS_TESTFILES/vds/5_c.h5
-$SRC_TOOLS_TESTFILES/vds/5_vds.h5
-"
-
-LIST_OTHER_TEST_FILES="
-$SRC_H5REPACK_TESTFILES/h5repack-help.txt
-$SRC_H5REPACK_TESTFILES/h5repack_ext.bin
-$SRC_H5REPACK_TESTFILES/ublock.bin
-$SRC_H5REPACK_TESTFILES/h5repack.info
-$SRC_H5REPACK_TESTFILES/deflate_limit.h5repack_layout.h5.ddl
-$SRC_H5REPACK_TESTFILES/h5repack_layout.h5.ddl
-$SRC_H5REPACK_TESTFILES/h5repack_filters.h5-gzip_verbose_filters.tst
-$SRC_H5REPACK_TESTFILES/h5repack_layout.h5-dset2_chunk_20x10-errstk.tst
-$SRC_H5REPACK_TESTFILES/h5repack_layout.h5-plugin_test.ddl
-$SRC_H5REPACK_TESTFILES/plugin_test.h5repack_layout.h5.tst
-$SRC_H5REPACK_TESTFILES/1_vds.h5-vds_dset_chunk20x10x5-v.ddl
-$SRC_H5REPACK_TESTFILES/2_vds.h5-vds_chunk3x6x9-v.ddl
-$SRC_H5REPACK_TESTFILES/3_1_vds.h5-vds_chunk2x5x8-v.ddl
-$SRC_H5REPACK_TESTFILES/4_vds.h5-vds_compa-v.ddl
-$SRC_H5REPACK_TESTFILES/4_vds.h5-vds_conti-v.ddl
-"
-
-#
-# copy test files and expected output files from source dirs to test dir
-#
-COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES"
-
-COPY_TESTFILES_TO_TESTDIR()
-{
-    # copy test files. Used -f to make sure get a new copy
-    for tstfile in $COPY_TESTFILES
-    do
-        # ignore '#' comment
-        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
-        RET=$?
-        if [ $RET -eq 1 ]; then
-            # skip cp if srcdir is same as destdir
-            # this occurs when build/test performed in source dir and
-            # make cp fail
-            SDIR=`$DIRNAME $tstfile`
-            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
-            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
-            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-    	        $CP -f $tstfile $TESTDIR
-                if [ $? -ne 0 ]; then
-                    echo "Error: FAILED to copy $tstfile ."
-
-                    # Comment out this to CREATE expected file
-                    exit $EXIT_FAILURE
-                fi
-            fi
-        fi
-    done
-}
-
-CLEAN_TESTFILES_AND_TESTDIR()
-{
-    # skip rm if srcdir is same as destdir
-    # this occurs when build/test performed in source dir and
-    # make cp fail
-    SDIR=$SRC_H5REPACK_TESTFILES
-    INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
-    INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
-    if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-        $RM $TESTDIR
-    fi
-}
-
-# Print a $* message left justified in a field of 70 characters
-#
-MESSAGE() {
-   SPACES="                                                               "
-   echo "$* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-#
-TESTING() {
-    MESSAGE "Testing $*"
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Verifying".
-#
-VERIFY() {
-    MESSAGE "Verifying $*"
-}
-
-# Print a message that a test has been skipped (because a required filter
-# was unavailable)
-SKIP() {
-    TESTING $H5REPACK $@
-    echo " -SKIP-"
-}
-
-# Call the h5diff tool
-#
-DIFFTEST()
-{
-    VERIFY h5diff output $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5DIFF_BIN -q  "$@"
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-         echo "*FAILED*"
-         nerrors="`expr $nerrors + 1`"
-    else
-         echo " PASSED"
-    fi
-
-}
-
-# Call h5repack
-#
-
-
-# call TOOLTEST_MAIN and delete $output file
-TOOLTEST()
-{
-    echo $@
-    infile=$2
-    outfile=out-$1.$2
-    shift
-    shift
-
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-        echo "*FAILED*"
-        nerrors="`expr $nerrors + 1`"
-    else
-        echo " PASSED"
-        DIFFTEST $infile $outfile
-    fi
-    rm -f $outfile
-}
-
-#------------------------------------------
-# Verifying layouts of a dataset
-VERIFY_LAYOUT_DSET()
-{
-    layoutfile=layout-$1.$2
-    dset=$3
-    expectlayout=$4
-    infile=$2
-    outfile=out-$1.$2
-    shift
-    shift
-    shift
-    shift
-
-    TESTING  $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-        echo "*FAILED*"
-        nerrors="`expr $nerrors + 1`"
-    else
-        echo " PASSED"
-        DIFFTEST $infile $outfile
-    fi
-
-    #---------------------------------
-    # check the layout from a dataset
-    VERIFY  "a dataset layout"
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5DUMP_BIN -d $dset -pH $outfile > $layoutfile
-    )
-    $GREP $expectlayout $TESTDIR/$layoutfile > /dev/null
-    if [ $? -eq 0 ]; then
-        echo " PASSED"
-    else
-        echo " FAILED"
-        nerrors="`expr $nerrors + 1`"
-    fi
-
-    # clean up tmp files
-    rm -f $outfile
-    rm -f $layoutfile
-}
-
-#------------------------------------------
-# Verifying layouts of a dataset
-VERIFY_LAYOUT_VDS()
-{
-    layoutfile=layout-$1.$2
-    dset=$3
-    expectlayout=$4
-    infile=$2
-    outfile=out-$1.$2
-
-    expect="$TESTDIR/$2-$1-v.ddl"
-    actual="$TESTDIR/$2-$1-v.out"
-    actual_err="$TESTDIR/$2-$1-v.err"
-
-    shift
-    shift
-    shift
-    shift
-
-    TESTING  $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-        echo "*FAILED*"
-        nerrors="`expr $nerrors + 1`"
-    else
-        echo " PASSED"
-    fi
-
-    #---------------------------------
-    # check the layout from a dataset
-    VERIFY  "a dataset layout"
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5DUMP_BIN -d $dset -p $outfile
-    ) >$actual 2>$actual_err
-
-    cat $actual_err >> $actual
-
-    if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-     echo " CREATED"
-     cp $actual $expect
-    elif $CMP $expect $actual > /dev/null 2>&1 ; then
-     echo " PASSED"
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.ddl) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $caseless $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-     rm -f $actual $actual_err
-    fi
-
-    # clean up tmp files
-    rm -f $outfile
-}
-
-#----------------------------------------
-# Verifying layouts from entire file
-VERIFY_LAYOUT_ALL()
-{
-    infile=$2
-    outfile=out-$1.$2
-    layoutfile=layout-$1.$2
-    expectlayout=$3
-    shift
-    shift
-    shift
-
-    TESTING  $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-        echo "*FAILED*"
-        nerrors="`expr $nerrors + 1`"
-    else
-        echo " PASSED"
-        DIFFTEST $infile $outfile
-    fi
-
-
-    #---------------------------------
-    # check the layout from a dataset
-    # check if the other layouts still exsit
-    VERIFY  "layouts"
-    (
-        cd $TESTDIR
-        echo
-        # if CONTIGUOUS
-        if [ $expectlayout = "CONTIGUOUS" ]; then
-            TESTING $H5DUMP_BIN -pH $outfile
-            (
-                $RUNSERIAL $H5DUMP_BIN -pH $outfile > $layoutfile
-            )
-            $GREP "COMPACT" $layoutfile  > /dev/null
-            if [ $? -eq 0 ]; then
-                echo " FAILED"
-                nerrors="`expr $nerrors + 1`"
-            else
-                $GREP "CHUNKED" $layoutfile  > /dev/null
-                if [ $? -eq 0 ]; then
-                    echo " FAILED"
-                    nerrors="`expr $nerrors + 1`"
-                else
-                    echo " PASSED"
-                fi
-            fi
-        else
-            # if COMPACT
-            if [ $expectlayout = "COMPACT" ]; then
-                TESTING $H5DUMP_BIN -pH $outfile
-                (
-                    $RUNSERIAL $H5DUMP_BIN -pH $outfile > $layoutfile
-                )
-                $GREP "CHUNKED" $layoutfile  > /dev/null
-                if [ $? -eq 0 ]; then
-                    echo " FAILED"
-                    nerrors="`expr $nerrors + 1`"
-                else
-                    $GREP "CONTIGUOUS" $layoutfile  > /dev/null
-                    if [ $? -eq 0 ]; then
-                        echo " FAILED"
-                        nerrors="`expr $nerrors + 1`"
-                    else
-                        echo " PASSED"
-                    fi
-                fi
-            else
-                # if CHUNKED
-                if [ $expectlayout = "CHUNKED" ]; then
-                    TESTING $H5DUMP_BIN -pH $outfile
-                    (
-                        $RUNSERIAL $H5DUMP_BIN -pH $outfile > $layoutfile
-                    )
-                    $GREP "CONTIGUOUS" $layoutfile  > /dev/null
-                    if [ $? -eq 0 ]; then
-                        echo " FAILED"
-                        nerrors="`expr $nerrors + 1`"
-                    else
-                        $GREP "COMPACT" $layoutfile  > /dev/null
-                        if [ $? -eq 0 ]; then
-                            echo " FAILED"
-                            nerrors="`expr $nerrors + 1`"
-                        else
-                            echo " PASSED"
-                        fi
-                    fi
-                fi
-           fi
-        fi
-    )
-
-    # clean up tmp files
-    rm -f $outfile
-    rm -f $layoutfile
-}
-
-# same as TOOLTEST, but it uses the old syntax -i input_file -o output_file
-#
-TOOLTEST0()
-{
-    infile=$2
-    outfile=out-$1.$2
-    shift
-    shift
-
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN -i $infile -o $outfile "$@"
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-        echo "*FAILED*"
-        nerrors="`expr $nerrors + 1`"
-    else
-        echo " PASSED"
-        DIFFTEST $infile $outfile
-    fi
-    rm -f $outfile
-}
-
-
-# same as TOOLTEST, but it uses without -i -o options
-# used to test the family driver, where these files reside
-#
-TOOLTEST1()
-{
-    infile=$2
-    outfile=out-$1.$2
-    shift
-    shift
-
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-	echo "*FAILED*"
-	nerrors="`expr $nerrors + 1`"
-    else
-	echo " PASSED"
-	DIFFTEST $infile $outfile
-    fi
-    rm -f $outfile
-}
-
-# This is same as TOOLTEST() with comparing display output
-# from -v option
-#
-TOOLTESTV()
-{
-    expect="$TESTDIR/$2-$1.tst"
-    actual="$TESTDIR/`basename $2 .ddl`.out"
-    actual_err="$TESTDIR/`basename $2 .ddl`.err"
-
-    infile=$2
-    outfile=out-$1.$2
-    shift
-    shift
-
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    ) >$actual 2>$actual_err
-    RET=$?
-    if [ $RET != 0 ] ; then
-	echo "*FAILED*"
-	nerrors="`expr $nerrors + 1`"
-    else
-	echo " PASSED"
-	DIFFTEST $infile $outfile
-    fi
-
-    # display output compare
-    STDOUT_FILTER $actual
-    cat $actual_err >> $actual
-
-    VERIFY output from $H5REPACK $@
-    if cmp -s $expect $actual; then
-     echo " PASSED"
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.tst) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && diff -c $expect $actual |sed 's/^/    /'
-    fi
-
-   rm -f $actual $actual_err
-   rm -f $outfile
-}
-
-# same as TOOLTESTV but filters error stack output and compares to an error file
-# Extract file name, line number, version and thread IDs because they may be different
-# ADD_H5ERR_MASK_TEST
-TOOLTESTM() {
-
-    expect="$TESTDIR/$2-$1.tst"
-    actual="$TESTDIR/`basename $2 .tst`.out"
-    actual_err="$TESTDIR/`basename $2 .tst`.oerr"
-    actual_sav=${actual}-sav
-    actual_err_sav=${actual_err}-sav
-
-    infile=$2
-    outfile=out-$1.$2
-    shift
-    shift
-
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    ) >$actual 2>$actual_err
-
-    # save actual and actual_err in case they are needed later.
-    cp $actual $actual_sav
-    cp $actual_err $actual_err_sav
-
-    # Extract file name, line number, version and thread IDs because they may be different
-    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
-        -e 's/line [0-9]*/line (number)/' \
-        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
-        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
-        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
-        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
-     $actual_err > $actual
-
-    if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-     echo " CREATED"
-     cp $actual $expect
-    elif $CMP $expect $actual; then
-      echo " PASSED"
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.tst) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-   rm -f $actual $actual_err $actual_sav $actual_err_sav
-    fi
-
-}
-
-# This is same as TOOLTESTV() with comparing h5dump output
-# from -pH option
-#
-TOOLTEST_DUMP()
-{
-    infile=$2
-    outfile=out-$1.$2
-    expect="$TESTDIR/$1.$2.ddl"
-    actual="$TESTDIR/out-$1.$2.out"
-    actual_err="$TESTDIR/out-$1.$2.err"
-
-    shift
-    shift
-
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    ) >$actual 2>$actual_err
-    RET=$?
-    if [ $RET != 0 ] ; then
-    echo "*FAILED*"
-    nerrors="`expr $nerrors + 1`"
-    else
-     echo " PASSED"
-     VERIFY h5dump output $@
-     (
-        cd $TESTDIR
-        $RUNSERIAL $H5DUMP_BIN -pH $outfile
-     ) >$actual 2>$actual_err
-     cat $actual_err >> $actual
-
-     RET=$?
-
-    fi
-
-    if cmp -s $expect $actual; then
-     echo " PASSED"
-    else
-     echo "*FAILED*"
-     echo "    Expected result (*.ddl) differs from actual result (*.out)"
-     nerrors="`expr $nerrors + 1`"
-     test yes = "$verbose" && diff -c $expect $actual |sed 's/^/    /'
-    fi
-
-   rm -f $actual $actual_err
-   rm -f $outfile
-}
-
-# TOOLTEST_META:
-# Test metadata block size option.
-# Reason to create a function here is to localize all special steps related to
-# metadata block size option in one place.  This is a quick solution.  More
-# thought out solution needed when there is more time.
-#
-# $1: test input file
-# $2:$: metadata options (either "-M size" or "--metadata_block_size=size")
-#
-# Algorithm:
-# Run it once without the metadata option ($2-$);
-# Save the result output file;
-# Run it second time with the metadata option;
-# Verify the output file of second run is larger than the one of 1st run.
-TOOLTEST_META()
-{
-    infile=$2
-    outfile=out-$1.$2
-    shift
-    shift
-
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN $infile $outfile
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-        echo "*FAILED*"
-        nerrors="`expr $nerrors + 1`"
-    else
-        echo " PASSED"
-        DIFFTEST $infile $outfile
-    fi
-    # get the size of the first output file
-    size1=`wc -c $TESTDIR/$outfile | cut -d' ' -f1`
-
-    # 2nd run with metadata option
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-        cd $TESTDIR
-        $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
-    )
-    RET=$?
-    if [ $RET != 0 ] ; then
-        echo "*FAILED*"
-        nerrors="`expr $nerrors + 1`"
-    else
-        echo " PASSED"
-        DIFFTEST $infile $outfile
-    fi
-    # get the size of the second output file
-    size2=`wc -c $TESTDIR/$outfile | cut -d' ' -f1`
-
-    # verify sizes.
-    MESSAGE "Verify the sizes of both output files ($size1 vs $size2)"
-    if [ $size1 -lt $size2 ]; then
-    	# pass
-	echo " PASSED"
-    else
-	#fail
-	echo "*FAILED*"
-        nerrors="`expr $nerrors + 1`"
-    fi
-
-    rm -f $outfile
-}
-
-# ADD_HELP_TEST
-TOOLTEST_HELP() {
-
-    expect="$TESTDIR/$1"
-    actual="$TESTDIR/`basename $1 .txt`.out"
-    actual_err="$TESTDIR/`basename $1 .txt`.err"
-    shift
-
-    # Run test.
-    TESTING $H5REPACK $@
-    (
-      cd $TESTDIR
-      $RUNSERIAL $H5REPACK_BIN "$@"
-    ) >$actual 2>$actual_err
-    cat $actual_err >> $actual
-
-    if [ ! -f $expect ]; then
-    # Create the expect data file if it doesn't yet exist.
-      echo " CREATED"
-      cp $actual $expect-CREATED
-    elif cmp -s $expect $actual; then
-      echo " PASSED"
-    else
-      echo "*FAILED*"
-      echo "    Expected output (*.txt) differs from actual output (*.out)"
-      nerrors="`expr $nerrors + 1`"
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-     rm -f $actual $actual_err
-    fi
-
-}
-
-# This is different from $srcdir/../../bin/output_filter.sh
-STDOUT_FILTER() {
-    result_file=$1
-    tmp_file=/tmp/h5test_tmp_$$
-    # Filter name of files.
-    cp $result_file $tmp_file
-    sed -e '/^Opening file/d' -e '/^Making file/d' \
-    < $tmp_file > $result_file
-    # cleanup
-    rm -f $tmp_file
-}
-
-#
-# The tests
-# We use the files generated by h5repacktst
-# Each run generates "<file>.out.h5" and the tool h5diff is used to
-# compare the input and output files
-#
-# the tests are the same as the program h5repacktst, but run from the CLI
-#
-
-# See which filters are usable (and skip tests for filters we
-# don't have).  Do this by searching H5pubconf.h to see which
-# filters are defined.
-
-# detect whether the encoder is present.
-USE_FILTER_SZIP_ENCODER="no";
-if test $USE_FILTER_SZIP = "yes"; then
-USE_FILTER_SZIP_ENCODER=`$RUNSERIAL $H5DETECTSZIP_BIN`
-fi
-
-##############################################################################
-###			  T H E   T E S T S
-##############################################################################
-# prepare for test
-COPY_TESTFILES_TO_TESTDIR
-
-TOOLTEST_HELP h5repack-help.txt -h
-
-# copy files (these files have no filters)
-TOOLTEST fill h5repack_fill.h5
-TOOLTEST objs h5repack_objs.h5
-TOOLTEST attr h5repack_attr.h5
-TOOLTEST hlink h5repack_hlink.h5
-TOOLTEST layout h5repack_layout.h5
-TOOLTEST early h5repack_early.h5
-
-# nested 8bit enum in both deflated and non-deflated datafiles
-if [ $USE_FILTER_DEFLATE != "yes" ]; then
-TOOLTEST nested_8bit_enum h5repack_nested_8bit_enum.h5
-else
-TOOLTEST nested_8bit_enum h5repack_nested_8bit_enum_deflated.h5
-fi
-
-# use h5repack_layout.h5 to write some filters  (this file has  no filters)
-
-# gzip with individual object
-arg="h5repack_layout.h5 -f dset1:GZIP=1  -l dset1:CHUNK=20x10"
-if test  $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST gzip_individual $arg
-fi
-
-# gzip for all
-arg="h5repack_layout.h5 -f GZIP=1"
-if test  $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST gzip_all $arg
-fi
-
-# szip with individual object
-arg="h5repack_layout.h5 -f dset2:SZIP=8,EC  -l dset2:CHUNK=20x10"
-if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
- SKIP $arg
-else
- TOOLTEST szip_individual $arg
-fi
-
-# szip for all
-arg="h5repack_layout.h5 -f SZIP=8,NN"
-if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
- SKIP $arg
-else
- TOOLTEST szip_all $arg
-fi
-
-# shuffle with individual object
-arg="h5repack_layout.h5 -f dset2:SHUF  -l dset2:CHUNK=20x10"
-TOOLTEST shuffle_individual $arg
-
-
-# shuffle for all
-arg="h5repack_layout.h5 -f SHUF"
-TOOLTEST shuffle_all $arg
-
-# fletcher32  with individual object
-arg="h5repack_layout.h5 -f dset2:FLET  -l dset2:CHUNK=20x10"
-TOOLTEST fletcher_individual $arg
-
-# fletcher32 for all
-arg="h5repack_layout.h5 -f FLET"
-TOOLTEST fletcher_all $arg
-
-# all filters
-arg="h5repack_layout.h5 -f dset2:SHUF -f dset2:FLET -f dset2:SZIP=8,NN -f dset2:GZIP=1 -l dset2:CHUNK=20x10"
-if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" -o $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST all_filters $arg
-fi
-
-# verbose gzip with individual object
-arg="h5repack_filters.h5 -v -f /dset_deflate:GZIP=9"
-if test  $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- # compare output
- TOOLTESTV gzip_verbose_filters $arg
-fi
-
-###########################################################
-# the following tests assume the input files have filters
-###########################################################
-
-# szip copy
-arg="h5repack_szip.h5"
-if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
- SKIP $arg
-else
- TOOLTEST szip_copy $arg
-fi
-
-# szip remove
-arg="h5repack_szip.h5 --filter=dset_szip:NONE"
-if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
- SKIP $arg
-else
- TOOLTEST szip_remove $arg
-fi
-
-# deflate copy
-arg="h5repack_deflate.h5"
-if test $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST deflate_copy $arg
-fi
-
-# deflate remove
-arg="h5repack_deflate.h5 -f dset_deflate:NONE"
-if test $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST deflate_remove $arg
-fi
-
-# shuffle copy
-arg="h5repack_shuffle.h5"
-TOOLTEST shuffle_copy $arg
-
-# shuffle remove
-arg="h5repack_shuffle.h5 -f dset_shuffle:NONE"
-TOOLTEST shuffle_remove $arg
-
-# fletcher32 copy
-arg="h5repack_fletcher.h5"
-TOOLTEST fletcher_copy $arg
-
-# fletcher32 remove
-arg="h5repack_fletcher.h5 -f dset_fletcher32:NONE"
-TOOLTEST fletcher_remove $arg
-
-# nbit copy
-arg="h5repack_nbit.h5"
-TOOLTEST nbit_copy $arg
-
-# nbit remove
-arg="h5repack_nbit.h5 -f dset_nbit:NONE"
-TOOLTEST nbit_remove $arg
-
-# nbit add
-arg="h5repack_nbit.h5 -f dset_int31:NBIT"
-TOOLTEST nbit_add $arg
-
-# scaleoffset copy
-arg="h5repack_soffset.h5"
-TOOLTEST scale_copy $arg
-
-# scaleoffset add
-arg="h5repack_soffset.h5 -f dset_none:SOFF=31,IN"
-TOOLTEST scale_add $arg
-
-# scaleoffset remove
-arg="h5repack_soffset.h5 -f dset_scaleoffset:NONE"
-TOOLTEST scale_remove $arg
-
-# remove all  filters
-arg="h5repack_filters.h5 -f NONE"
-if test $USE_FILTER_DEFLATE != "yes" -o $USE_FILTER_SZIP != "yes" -o $USE_FILTER_SZIP_ENCODER != "yes" ; then
- SKIP $arg
-else
- TOOLTEST remove_all $arg
-fi
-
-#filter conversions
-
-arg="h5repack_deflate.h5 -f dset_deflate:SZIP=8,NN"
-if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" -o $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST deflate_convert $arg
-fi
-
-arg="h5repack_szip.h5 -f dset_szip:GZIP=1"
-if test $USE_FILTER_SZIP != "yes" -o $USE_FILTER_SZIP_ENCODER != "yes"  -o $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST szip_convert $arg
-fi
-
-
-#limit
-arg="h5repack_layout.h5 -f GZIP=1 -m 1024"
-if test $USE_FILTER_DEFLATE != "yes"  ; then
- SKIP $arg
-else
- TOOLTEST_DUMP deflate_limit $arg
-fi
-
-#file
-arg="h5repack_layout.h5 -e h5repack.info"
-if test $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST deflate_file $arg
-fi
-
-#########################################################
-# layout options (these files have no filters)
-#########################################################
-VERIFY_LAYOUT_DSET dset2_chunk_20x10 h5repack_layout.h5 dset2 CHUNKED --layout dset2:CHUNK=20x10
-
-VERIFY_LAYOUT_ALL chunk_20x10 h5repack_layout.h5 CHUNKED -l CHUNK=20x10
-
-VERIFY_LAYOUT_DSET dset2_conti h5repack_layout.h5 dset2 CONTIGUOUS -l dset2:CONTI
-
-VERIFY_LAYOUT_ALL conti h5repack_layout.h5 CONTIGUOUS -l CONTI
-
-VERIFY_LAYOUT_DSET dset2_compa h5repack_layout.h5 dset2 COMPACT -l dset2:COMPA
-
-VERIFY_LAYOUT_ALL compa h5repack_layout.h5 COMPACT -l COMPA
-
-TOOLTESTM dset2_chunk_20x10-errstk h5repack_layout.h5 --layout=dset2:CHUNK=20x10x5 --enable-error-stack
-
-################################################################
-# layout conversions (file has no filters)
-###############################################################
-
-VERIFY_LAYOUT_DSET dset_compa_conti h5repack_layout.h5 dset_compact CONTIGUOUS -l dset_compact:CONTI
-
-VERIFY_LAYOUT_DSET dset_compa_chunk h5repack_layout.h5 dset_compact CHUNKED -l dset_compact:CHUNK=2x5
-
-VERIFY_LAYOUT_DSET dset_compa_compa h5repack_layout.h5 dset_compact COMPACT -l dset_compact:COMPA
-
-VERIFY_LAYOUT_DSET dset_conti_compa h5repack_layout.h5 dset_contiguous COMPACT -l dset_contiguous:COMPA
-
-VERIFY_LAYOUT_DSET dset_conti_chunk h5repack_layout.h5 dset_contiguous CHUNKED -l dset_contiguous:CHUNK=3x6
-
-VERIFY_LAYOUT_DSET dset_conti_conti h5repack_layout.h5 dset_contiguous CONTIGUOUS -l dset_contiguous:CONTI
-
-VERIFY_LAYOUT_DSET chunk_compa h5repack_layout.h5 dset_chunk COMPACT -l dset_chunk:COMPA
-
-VERIFY_LAYOUT_DSET chunk_conti h5repack_layout.h5 dset_chunk CONTIGUOUS -l dset_chunk:CONTI
-
-VERIFY_LAYOUT_DSET chunk_18x13 h5repack_layout.h5 dset_chunk CHUNKED -l dset_chunk:CHUNK=18x13
-
-# test convert small size dataset ( < 1k) to compact layout without -m
-VERIFY_LAYOUT_DSET contig_small_compa h5repack_layout2.h5 contig_small COMPACT -l contig_small:COMPA
-
-VERIFY_LAYOUT_DSET contig_small_fixed_compa h5repack_layout2.h5 chunked_small_fixed COMPACT -l chunked_small_fixed:COMPA
-
-#---------------------------------------------------------------------------
-# Test file contains chunked datasets (need multiple dsets) with
-# unlimited max dims.   (HDFFV-7933)
-# Use first dset to test.
-#---------------------------------------------------------------------------
-# chunk to chunk - specify chunk dim bigger than any current dim
-VERIFY_LAYOUT_DSET chunk2chunk h5repack_layout3.h5 chunk_unlimit1 CHUNK -l chunk_unlimit1:CHUNK=100x300
-
-# chunk to contiguous
-VERIFY_LAYOUT_DSET chunk2conti h5repack_layout3.h5 chunk_unlimit1 CONTI -l chunk_unlimit1:CONTI
-
-# chunk to compact - convert big dataset (should be > 64k) for this purpose,
-# should remain as original layout (chunk)
-VERIFY_LAYOUT_DSET chunk2compa h5repack_layout3.h5 chunk_unlimit1 CHUNK -l chunk_unlimit1:COMPA
-
-#--------------------------------------------------------------------------
-# Test -f for some specific cases. Chunked dataset with unlimited max dims.
-# (HDFFV-8012)
-#--------------------------------------------------------------------------
-# - should not fail
-# - should not change max dims from unlimit
-
-# chunk dim is bigger than dataset dim. ( dset size < 64k )
-VERIFY_LAYOUT_DSET error1 h5repack_layout3.h5 chunk_unlimit1 H5S_UNLIMITED -f chunk_unlimit1:NONE
-# chunk dim is bigger than dataset dim. ( dset size > 64k )
-VERIFY_LAYOUT_DSET error2 h5repack_layout3.h5 chunk_unlimit2 H5S_UNLIMITED -f chunk_unlimit2:NONE
-
-# chunk dims are smaller than dataset dims. ( dset size < 64k )
-#TOOLTEST_MAIN h5repack_layout3.h5  -f chunk_unlimit3:NONE
-VERIFY_LAYOUT_DSET error3 h5repack_layout3.h5 chunk_unlimit3 H5S_UNLIMITED -f chunk_unlimit3:NONE
-
-# file input - should not fail
-TOOLTEST error4 h5repack_layout3.h5 -f NONE
-
-#--------------------------------------------------------------------------
-# Test base: Convert CHUNK to CONTI for a chunked dataset with small dataset
-# (dset size < 64K) and with unlimited max dims on a condition as follow.
-# (HDFFV-8214)
-#--------------------------------------------------------------------------
-
-# chunk dim is bigger than dataset dim. should succeed.
-VERIFY_LAYOUT_DSET ckdim_biger h5repack_layout3.h5 chunk_unlimit2 CONTI -l chunk_unlimit2:CONTI
-# chunk dim is smaller than dataset dim. should succeed.
-VERIFY_LAYOUT_DSET ckdim_smaller h5repack_layout3.h5 chunk_unlimit3 CONTI -l chunk_unlimit3:CONTI
-
-
-# Native option
-# Do not use FILE1, as the named dtype will be converted to native, and h5diff will
-# report a difference.
-TOOLTEST native_fill h5repack_fill.h5 -n
-TOOLTEST native_attr h5repack_attr.h5 -n
-
-
-# latest file format with long switches. use FILE4=h5repack_layout.h5 (no filters)
-arg="h5repack_layout.h5 --layout CHUNK=20x10 --filter GZIP=1 --minimum=10 --native --latest --compact=8 --indexed=6 --ssize=8[:dtype]"
-if test $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- VERIFY_LAYOUT_ALL layout_long_switches h5repack_layout.h5 CHUNKED --layout CHUNK=20x10 --filter GZIP=1 --minimum=10 --native --latest --compact=8 --indexed=6 --ssize=8[:dtype]
-fi
-
-# latest file format with short switches. use FILE4=h5repack_layout.h5 (no filters)
-arg="h5repack_layout.h5 -l CHUNK=20x10 -f GZIP=1 -m 10 -n -L -c 8 -d 6 -s 8[:dtype]"
-if test $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- VERIFY_LAYOUT_ALL layout_short_switches h5repack_layout.h5 CHUNKED -l CHUNK=20x10 -f GZIP=1 -m 10 -n -L -c 8 -d 6 -s 8[:dtype]
-fi
-
-# several global filters
-
-arg="h5repack_layout.h5 --filter GZIP=1 --filter SHUF"
-if test $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST global_filters $arg
-fi
-
-# syntax of -i infile -o outfile
-# latest file format with short switches. use FILE4=h5repack_layout.h5 (no filters)
-arg="h5repack_layout.h5 -l CHUNK=20x10 -f GZIP=1 -m 10 -n -L -c 8 -d 6 -s 8[:dtype]"
-if test $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg
-else
- TOOLTEST0 old_style_layout_short_switches $arg
-fi
-
-# add a userblock to file
-arg="h5repack_objs.h5 -u ublock.bin -b 2048"
-TOOLTEST add_userblock $arg
-
-# add alignment
-arg="h5repack_objs.h5 -t 1 -a 1 "
-TOOLTEST add_alignment $arg
-
-# Check repacking file with old version of layout message (should get upgraded
-#       to new version and be readable, etc.)
-TOOLTEST upgrade_layout h5repack_layouto.h5
-
-# test for datum size > H5TOOLS_MALLOCSIZE
-TOOLTEST gt_mallocsize h5repack_objs.h5 -f GZIP=1
-
-# Check repacking file with committed datatypes in odd configurations
-TOOLTEST committed_dt h5repack_named_dtypes.h5
-
-# tests family driver (file is located in common testfiles folder, uses TOOLTEST1
-TOOLTEST1 family tfamily%05d.h5
-
-# test various references (bug 1814 and 1726)
-TOOLTEST bug1814 h5repack_refs.h5
-
-# test attribute with various references (bug1797 / HDFFV-5932)
-# the references in attribute of compund or vlen datatype
-TOOLTEST HDFFV-5932 h5repack_attr_refs.h5
-
-# Add test for memory leak in attirbute. This test is verified by CTEST.
-# 1. leak from vlen string
-# 2. leak from compound type without reference member
-# (HDFFV-7840, )
-# Note: this test is experimental for sharing test file among tools
-TOOLTEST HDFFV-7840 h5diff_attr1.h5
-
-# tests for metadata block size option
-TOOLTEST_META meta_short h5repack_layout.h5 -M 8192
-TOOLTEST_META meta_long h5repack_layout.h5 --metadata_block_size=8192
-
-# VDS tests
-
-################################################################
-# layout conversions
-###############################################################
-if test  $USE_FILTER_DEFLATE != "yes" ; then
- SKIP vds_dset_chunk_20x10x5
-else
- VERIFY_LAYOUT_VDS vds_dset_chunk_20x10x5 1_vds.h5 vds_dset CHUNKED --layout vds_dset:CHUNK=20x10x5
-fi
-
-if test  $USE_FILTER_DEFLATE != "yes" ; then
- SKIP vds_chunk2x5x8
-else
- VERIFY_LAYOUT_VDS vds_chunk2x5x8 3_1_vds.h5 vds_dset CHUNKED -l vds_dset:CHUNK=2x5x8
-fi
-
-if test  $USE_FILTER_DEFLATE != "yes" ; then
- SKIP vds_chunk3x6x9
-else
- VERIFY_LAYOUT_VDS vds_chunk3x6x9 2_vds.h5 vds_dset CHUNKED -l vds_dset:CHUNK=3x6x9
-fi
-
-if test  $USE_FILTER_DEFLATE != "yes" ; then
- SKIP vds_compa 4_vds.h5
-else
- VERIFY_LAYOUT_VDS vds_compa 4_vds.h5 vds_dset COMPACT -l vds_dset:COMPA
-fi
-
-if test  $USE_FILTER_DEFLATE != "yes" ; then
- SKIP vds_conti 4_vds.h5
-else
- VERIFY_LAYOUT_VDS vds_conti 4_vds.h5 vds_dset CONTIGUOUS -l vds_dset:CONTI
-fi
-
-# Clean up temporary files/directories
-CLEAN_TESTFILES_AND_TESTDIR
-
-if test $nerrors -eq 0 ; then
-    echo "All $TESTNAME tests passed."
-    exit $EXIT_SUCCESS
-else
-    echo "$TESTNAME tests failed with $nerrors errors."
-    exit $EXIT_FAILURE
-fi
-