Tools merge from develop-1.10

17 files changed, 696 insertions, 726 deletions

diff --git a/tools/h5repack/CMakeTests.cmake b/tools/h5repack/CMakeTests.cmake
index 0ed2804..3710202 100644
--- a/tools/h5repack/CMakeTests.cmake
+++ b/tools/h5repack/CMakeTests.cmake
@@ -1,3 +1,14 @@
+#
+# Copyright by The HDF Group.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+#
 
 ##############################################################################
 ##############################################################################
diff --git a/tools/h5repack/Makefile.am b/tools/h5repack/Makefile.am
index d7690a8..59a98b8 100644
--- a/tools/h5repack/Makefile.am
+++ b/tools/h5repack/Makefile.am
@@ -5,12 +5,10 @@
 #
 # This file is part of HDF5.  The full HDF5 copyright notice, including
 # terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
 ##
 ## Makefile.am
 ## Run automake to generate a Makefile.in from this file.
diff --git a/tools/h5repack/dynlib_rpk.c b/tools/h5repack/dynlib_rpk.c
index 3469e58..29c3eae 100644
--- a/tools/h5repack/dynlib_rpk.c
+++ b/tools/h5repack/dynlib_rpk.c
@@ -4,12 +4,10 @@
  *                                                                           *
  * This file is part of HDF5. The full HDF5 copyright notice, including      *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic document set and is     *
- * linked from the top-level documents page.  It can also be found at        *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have access   *
- * to either file, you may request a copy from help@hdfgroup.org.            *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 /*
  * Programmer:    Raymond Lu
diff --git a/tools/h5repack/dynlib_vrpk.c b/tools/h5repack/dynlib_vrpk.c
index 8da0270..06d90ff 100644
--- a/tools/h5repack/dynlib_vrpk.c
+++ b/tools/h5repack/dynlib_vrpk.c
@@ -4,12 +4,10 @@
  *                                                                           *
  * This file is part of HDF5. The full HDF5 copyright notice, including      *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic document set and is     *
- * linked from the top-level documents page.  It can also be found at        *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have access   *
- * to either file, you may request a copy from help@hdfgroup.org.            *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 /*
  * Purpose:    Tests the plugin module (H5PL)
diff --git a/tools/h5repack/h5repack.c b/tools/h5repack/h5repack.c
index 0c14992..35cf7a0 100644
--- a/tools/h5repack/h5repack.c
+++ b/tools/h5repack/h5repack.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include <stdlib.h>
@@ -53,19 +51,19 @@ static int have_request(pack_opt_t *options);
  *-------------------------------------------------------------------------
  */
 int h5repack(const char* infile, const char* outfile, pack_opt_t *options) {
-	/* check input */
-	if (check_options(options) < 0)
-		return -1;
+    /* check input */
+    if (check_options(options) < 0)
+        return -1;
 
-	/* check for objects in input that are in the file */
-	if (check_objects(infile, options) < 0)
-		return -1;
+    /* check for objects in input that are in the file */
+    if (check_objects(infile, options) < 0)
+        return -1;
 
-	/* copy the objects  */
-	if (copy_objects(infile, outfile, options) < 0)
-		return -1;
+    /* copy the objects  */
+    if (copy_objects(infile, outfile, options) < 0)
+        return -1;
 
-	return 0;
+    return 0;
 }
 
 /*-------------------------------------------------------------------------
@@ -78,7 +76,8 @@ int h5repack(const char* infile, const char* outfile, pack_opt_t *options) {
  *-------------------------------------------------------------------------
  */
 
-int h5repack_init(pack_opt_t *options, int verbose) {
+h5repack_init(pack_opt_t *options, int verbose)
+{
     int k, n;
 
     HDmemset(options, 0, sizeof(pack_opt_t));
@@ -105,7 +104,7 @@ int h5repack_init(pack_opt_t *options, int verbose) {
  */
 
 int h5repack_end(pack_opt_t *options) {
-	return options_table_free(options->op_tbl);
+    return options_table_free(options->op_tbl);
 }
 
 /*-------------------------------------------------------------------------
@@ -121,10 +120,10 @@ int h5repack_end(pack_opt_t *options) {
 int
 h5repack_addfilter(const char* str, pack_opt_t *options)
 {
-    obj_list_t *obj_list = NULL; /* one object list for the -f and -l option entry */
-    filter_info_t filter;       /* filter info for the current -f option entry */
-    unsigned n_objs;    /* number of objects in the current -f or -l option entry */
-    int is_glb;         /* is the filter global */
+    obj_list_t   *obj_list = NULL; /* one object list for the -f and -l option entry */
+    filter_info_t filter;          /* filter info for the current -f option entry */
+    unsigned      n_objs;          /* number of objects in the current -f or -l option entry */
+    int           is_glb;          /* is the filter global */
 
     /* parse the -f option */
     if (NULL == (obj_list = parse_filter(str, &n_objs, &filter, options, &is_glb)))
@@ -163,10 +162,10 @@ int
 h5repack_addlayout(const char* str, pack_opt_t *options)
 {
     obj_list_t *obj_list = NULL; /*one object list for the -t and -c option entry */
-    unsigned n_objs; /*number of objects in the current -t or -c option entry */
-    pack_info_t pack; /*info about layout to extract from parse */
-    int j;
-    int ret_value = -1;
+    unsigned    n_objs;          /*number of objects in the current -t or -c option entry */
+    pack_info_t pack;            /*info about layout to extract from parse */
+    int         j;
+    int         ret_value = -1;
 
     init_packobject(&pack);
 
@@ -232,87 +231,84 @@ h5repack_addlayout(const char* str, pack_opt_t *options)
  *-------------------------------------------------------------------------
  */
 hid_t copy_named_datatype(hid_t type_in, hid_t fidout,
-		named_dt_t **named_dt_head_p, trav_table_t *travt, pack_opt_t *options) {
-	named_dt_t *dt = *named_dt_head_p; /* Stack pointer */
-	named_dt_t *dt_ret = NULL; /* Datatype to return */
-	H5O_info_t oinfo; /* Object info of input dtype */
-	hid_t ret_value = -1; /* The identifier of the named dtype in the out file */
-
-	if (H5Oget_info(type_in, &oinfo) < 0)
-		goto done;
-
-	if (*named_dt_head_p) {
-		/* Stack already exists, search for the datatype */
-		while (dt && dt->addr_in != oinfo.addr)
-			dt = dt->next;
-
-		dt_ret = dt;
-	}
-	else {
-		/* Create the stack */
-		size_t i;
-
-		for (i = 0; i < travt->nobjs; i++) {
-			if (travt->objs[i].type == H5TRAV_TYPE_NAMED_DATATYPE) {
-				/* Push onto the stack */
-				if (NULL == (dt = (named_dt_t *) HDmalloc(sizeof(named_dt_t)))) {
-					goto done;
-				}
-				dt->next = *named_dt_head_p;
-				*named_dt_head_p = dt;
-
-				/* Update the address and id */
-				dt->addr_in = travt->objs[i].objno;
-				dt->id_out = -1;
-
-				/* Check if this type is the one requested */
-				if (oinfo.addr == dt->addr_in) {
-					HDassert(!dt_ret);
-					dt_ret = dt;
-				} /* end if */
-			} /* end if */
-		} /* end for */
-	} /* end else */
-
-	/* Handle the case that the requested datatype was not found.  This is
-	 * possible if the datatype was committed anonymously in the input file. */
-	if (!dt_ret) {
-		/* Push the new datatype onto the stack */
-		if (NULL == (dt_ret = (named_dt_t *) HDmalloc(sizeof(named_dt_t)))) {
-			goto done;
-		}
-		dt_ret->next = *named_dt_head_p;
-		*named_dt_head_p = dt_ret;
-
-		/* Update the address and id */
-		dt_ret->addr_in = oinfo.addr;
-		dt_ret->id_out = -1;
-	} /* end if */
-
-	/* If the requested datatype does not yet exist in the output file, copy it
-	 * anonymously */
-	if (dt_ret->id_out < 0) {
-		if (options->use_native == 1)
-			dt_ret->id_out = h5tools_get_native_type(type_in);
-		else
-			dt_ret->id_out = H5Tcopy(type_in);
-		if (dt_ret->id_out < 0)
-			goto done;
-		if (H5Tcommit_anon(fidout, dt_ret->id_out, H5P_DEFAULT, H5P_DEFAULT) < 0)
-			goto done;
-	} /* end if */
-
-	/* Set return value */
-	ret_value = dt_ret->id_out;
-
-	/* Increment the ref count on id_out, because the calling function will try
-	 * to close it */
-	if(H5Iinc_ref(ret_value) < 0) {
-		ret_value = -1;
-	}
+        named_dt_t **named_dt_head_p, trav_table_t *travt, pack_opt_t *options) {
+    named_dt_t *dt = *named_dt_head_p; /* Stack pointer */
+    named_dt_t *dt_ret = NULL;         /* Datatype to return */
+    H5O_info_t  oinfo;                 /* Object info of input dtype */
+    hid_t       ret_value = -1;        /* The identifier of the named dtype in the out file */
+
+    if (H5Oget_info(type_in, &oinfo) < 0)
+        goto done;
+
+    if (*named_dt_head_p) {
+        /* Stack already exists, search for the datatype */
+        while (dt && dt->addr_in != oinfo.addr)
+            dt = dt->next;
+
+        dt_ret = dt;
+    }
+    else {
+        /* Create the stack */
+        size_t i;
+
+        for (i = 0; i < travt->nobjs; i++) {
+            if (travt->objs[i].type == H5TRAV_TYPE_NAMED_DATATYPE) {
+                /* Push onto the stack */
+                if (NULL == (dt = (named_dt_t *)HDmalloc(sizeof(named_dt_t))))
+                    goto done;
+                dt->next = *named_dt_head_p;
+                *named_dt_head_p = dt;
+
+                /* Update the address and id */
+                dt->addr_in = travt->objs[i].objno;
+                dt->id_out = -1;
+
+                /* Check if this type is the one requested */
+                if (oinfo.addr == dt->addr_in) {
+                    HDassert(!dt_ret);
+                    dt_ret = dt;
+                } /* end if */
+            } /* end if */
+        } /* end for */
+    } /* end else */
+
+    /* Handle the case that the requested datatype was not found.  This is
+    * possible if the datatype was committed anonymously in the input file. */
+    if (!dt_ret) {
+        /* Push the new datatype onto the stack */
+        if (NULL == (dt_ret = (named_dt_t *)HDmalloc(sizeof(named_dt_t))))
+            goto done;
+        dt_ret->next = *named_dt_head_p;
+        *named_dt_head_p = dt_ret;
+
+        /* Update the address and id */
+        dt_ret->addr_in = oinfo.addr;
+        dt_ret->id_out = -1;
+    } /* end if */
+
+    /* If the requested datatype does not yet exist in the output file, copy it
+    * anonymously */
+    if (dt_ret->id_out < 0) {
+        if (options->use_native == 1)
+            dt_ret->id_out = H5Tget_native_type(type_in, H5T_DIR_DEFAULT);
+        else
+            dt_ret->id_out = H5Tcopy(type_in);
+        if (dt_ret->id_out < 0)
+            goto done;
+        if (H5Tcommit_anon(fidout, dt_ret->id_out, H5P_DEFAULT, H5P_DEFAULT) < 0)
+            goto done;
+    } /* end if */
+
+    /* Set return value */
+    ret_value = dt_ret->id_out;
+
+    /* Increment the ref count on id_out, because the calling function will try
+    * to close it */
+    if(H5Iinc_ref(ret_value) < 0)
+        ret_value = -1;
 
 done:
-	return (ret_value);
+    return (ret_value);
 } /* end copy_named_datatype */
 
 /*-------------------------------------------------------------------------
@@ -327,22 +323,22 @@ done:
  *-------------------------------------------------------------------------
  */
 int named_datatype_free(named_dt_t **named_dt_head_p, int ignore_err) {
-	named_dt_t *dt = *named_dt_head_p;
-	int ret_value = -1;
+    named_dt_t *dt = *named_dt_head_p;
+    int         ret_value = -1;
 
-	while (dt) {
-		/* Pop the datatype off the stack and free it */
-		if (H5Tclose(dt->id_out) < 0 && !ignore_err)
-			goto done;
-		dt = dt->next;
-		HDfree(*named_dt_head_p);
-		*named_dt_head_p = dt;
-	} /* end while */
+    while (dt) {
+        /* Pop the datatype off the stack and free it */
+        if (H5Tclose(dt->id_out) < 0 && !ignore_err)
+            goto done;
+        dt = dt->next;
+        HDfree(*named_dt_head_p);
+        *named_dt_head_p = dt;
+    } /* end while */
 
-	ret_value = 0;
+    ret_value = 0;
 
 done:
-	return (ret_value);
+    return (ret_value);
 } /* end named_datatype_free */
 
 /*-------------------------------------------------------------------------
@@ -363,25 +359,25 @@ done:
  */
 int
 copy_attr(hid_t loc_in, hid_t loc_out, named_dt_t **named_dt_head_p,
-		trav_table_t *travt, pack_opt_t *options)
+        trav_table_t *travt, pack_opt_t *options)
 {
-    int ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
-    hid_t attr_id = -1; /* attr ID */
-    hid_t attr_out = -1; /* attr ID */
-    hid_t space_id = -1; /* space ID */
-    hid_t ftype_id = -1; /* file type ID */
-    hid_t wtype_id = -1; /* read/write type ID */
-    size_t msize; /* size of type */
-    void *buf = NULL; /* data buffer */
-    hsize_t nelmts; /* number of elements in dataset */
-    int rank; /* rank of dataset */
-    htri_t is_named; /* Whether the datatype is named */
-    hsize_t dims[H5S_MAX_RANK];/* dimensions of dataset */
-    char name[255];
-    H5O_info_t oinfo; /* object info */
-    int j;
-    unsigned u;
-    hbool_t is_ref = 0;
+    int         ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
+    hid_t       attr_id = -1;  /* attr ID */
+    hid_t       attr_out = -1; /* attr ID */
+    hid_t       space_id = -1; /* space ID */
+    hid_t       ftype_id = -1; /* file type ID */
+    hid_t       wtype_id = -1; /* read/write type ID */
+    size_t      msize;         /* size of type */
+    void       *buf = NULL;    /* data buffer */
+    hsize_t     nelmts;        /* number of elements in dataset */
+    int         rank;          /* rank of dataset */
+    htri_t      is_named;      /* Whether the datatype is named */
+    hsize_t     dims[H5S_MAX_RANK];/* dimensions of dataset */
+    char        name[255];
+    H5O_info_t  oinfo;         /* object info */
+    int         j;
+    unsigned    u;
+    hbool_t     is_ref = 0;
     H5T_class_t type_class = -1;
 
     if (H5Oget_info(loc_in, &oinfo) < 0)
@@ -425,7 +421,7 @@ copy_attr(hid_t loc_in, hid_t loc_out, named_dt_t **named_dt_head_p,
         } /* end if */
         else {
             if (options->use_native == 1)
-                wtype_id = h5tools_get_native_type(ftype_id);
+                wtype_id = H5Tget_native_type(ftype_id, H5T_DIR_DEFAULT);
             else
                 wtype_id = H5Tcopy(ftype_id);
         } /* end else */
@@ -466,7 +462,7 @@ copy_attr(hid_t loc_in, hid_t loc_out, named_dt_t **named_dt_head_p,
             int nmembers = H5Tget_nmembers(wtype_id);
 
             for (j = 0; j < nmembers; j++) {
-                hid_t mtid = H5Tget_member_type(wtype_id, (unsigned) j);
+                hid_t mtid = H5Tget_member_type(wtype_id, (unsigned)j);
                 H5T_class_t mtclass = H5Tget_class(mtid);
                 H5Tclose(mtid);
 
@@ -477,16 +473,13 @@ copy_attr(hid_t loc_in, hid_t loc_out, named_dt_t **named_dt_head_p,
             } /* for (j=0; i<nmembers; j++) */
         } /* if (type_class == H5T_COMPOUND) */
 
-        if (is_ref) {
-            ; /* handled by copy_refs_attr() */
-        }
-        else {
+        if (!is_ref) {
             /*-------------------------------------------------------------------------
              * read to memory
              *-------------------------------------------------------------------------
              */
 
-            buf = (void *) HDmalloc((size_t)(nelmts * msize));
+            buf = (void *)HDmalloc((size_t)(nelmts * msize));
             if (buf == NULL) {
                 error_msg("h5repack", "cannot read into memory\n");
                 HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "HDmalloc failed");
@@ -568,190 +561,185 @@ done:
  * Programmer: pvn@ncsa.uiuc.edu
  *
  * Date: September, 22, 2003
- *
- * Modification:
- *   Peter Cao, July 9, 2007
- *   Add "-L, --latest" and other options to pack a file with the latest file format
- *
  *-------------------------------------------------------------------------
  */
 static int check_options(pack_opt_t *options) {
-	unsigned int i;
-	int k, j, has_cp = 0, has_ck = 0;
-	char slayout[30];
-
-	/*-------------------------------------------------------------------------
-	 * objects to layout
-	 *-------------------------------------------------------------------------
-	 */
-	if (options->verbose && have_request(options) /* only print if requested */) {
-		printf("Objects to modify layout are...\n");
-		if (options->all_layout == 1) {
-			switch (options->layout_g) {
-			case H5D_COMPACT:
-				strcpy(slayout, "compact");
-				break;
-			case H5D_CONTIGUOUS:
-				strcpy(slayout, "contiguous");
-				break;
-			case H5D_CHUNKED:
-				strcpy(slayout, "chunked");
-				break;
-			case H5D_LAYOUT_ERROR:
-			case H5D_NLAYOUTS:
-				error_msg("invalid layout\n");
-				return -1;
-			default:
-				strcpy(slayout, "invalid layout\n");
-				return -1;
-			}
-			printf(" Apply %s layout to all\n", slayout);
-			if (H5D_CHUNKED == options->layout_g) {
-				printf("with dimension [");
-				for (j = 0; j < options->chunk_g.rank; j++)
-					printf("%d ", (int) options->chunk_g.chunk_lengths[j]);
-				printf("]\n");
-			}
-		}
-	}/* verbose */
-
-	for (i = 0; i < options->op_tbl->nelems; i++) {
-		char* name = options->op_tbl->objs[i].path;
-
-		if (options->op_tbl->objs[i].chunk.rank > 0) {
-			if (options->verbose) {
-				printf(" <%s> with chunk size ", name);
-				for (k = 0; k < options->op_tbl->objs[i].chunk.rank; k++)
-					printf("%d ",
-							(int) options->op_tbl->objs[i].chunk.chunk_lengths[k]);
-				printf("\n");
-			}
-			has_ck = 1;
-		}
-		else if (options->op_tbl->objs[i].chunk.rank == -2) {
-			if (options->verbose)
-				printf(" <%s> %s\n", name, "NONE (contigous)");
-			has_ck = 1;
-		}
-	}
-
-	if (options->all_layout == 1 && has_ck) {
-		error_msg(
-				"invalid chunking input: 'all' option\
+    unsigned int i;
+    int          k, j, has_cp = 0, has_ck = 0;
+    char         slayout[30];
+
+    /*-------------------------------------------------------------------------
+    * objects to layout
+    *-------------------------------------------------------------------------
+    */
+    if (options->verbose && have_request(options) /* only print if requested */) {
+        printf("Objects to modify layout are...\n");
+        if (options->all_layout == 1) {
+            switch (options->layout_g) {
+            case H5D_COMPACT:
+                strcpy(slayout, "compact");
+                break;
+            case H5D_CONTIGUOUS:
+                strcpy(slayout, "contiguous");
+                break;
+            case H5D_CHUNKED:
+                strcpy(slayout, "chunked");
+                break;
+            case H5D_LAYOUT_ERROR:
+            case H5D_NLAYOUTS:
+                error_msg("invalid layout\n");
+                return -1;
+            default:
+                strcpy(slayout, "invalid layout\n");
+                return -1;
+            }
+            printf(" Apply %s layout to all\n", slayout);
+            if (H5D_CHUNKED == options->layout_g) {
+                printf("with dimension [");
+                for (j = 0; j < options->chunk_g.rank; j++)
+                    printf("%d ", (int) options->chunk_g.chunk_lengths[j]);
+                printf("]\n");
+            }
+        }
+    }/* verbose */
+
+    for (i = 0; i < options->op_tbl->nelems; i++) {
+        char* name = options->op_tbl->objs[i].path;
+
+        if (options->op_tbl->objs[i].chunk.rank > 0) {
+            if (options->verbose) {
+                printf(" <%s> with chunk size ", name);
+                for (k = 0; k < options->op_tbl->objs[i].chunk.rank; k++)
+                    printf("%d ",
+                            (int) options->op_tbl->objs[i].chunk.chunk_lengths[k]);
+                printf("\n");
+            }
+            has_ck = 1;
+        }
+        else if (options->op_tbl->objs[i].chunk.rank == -2) {
+            if (options->verbose)
+                printf(" <%s> %s\n", name, "NONE (contigous)");
+            has_ck = 1;
+        }
+    }
+
+    if (options->all_layout == 1 && has_ck) {
+        error_msg(
+                "invalid chunking input: 'all' option\
                             is present with other objects\n");
-		return -1;
-	}
-
-	/*-------------------------------------------------------------------------
-	 * objects to filter
-	 *-------------------------------------------------------------------------
-	 */
-
-	if (options->verbose && have_request(options) /* only print if requested */) {
-		printf("Objects to apply filter are...\n");
-		if (options->all_filter == 1) {
-			for (k = 0; k < options->n_filter_g; k++) {
-				H5Z_filter_t filtn = options->filter_g[k].filtn;
-				switch (filtn) {
-				case H5Z_FILTER_NONE:
-					printf(" Uncompress all\n");
-					break;
-				case H5Z_FILTER_SHUFFLE:
-				case H5Z_FILTER_FLETCHER32:
-					printf(" All with %s\n", get_sfilter(filtn));
-					break;
-				case H5Z_FILTER_SZIP:
-				case H5Z_FILTER_DEFLATE:
-					printf(" All with %s, parameter %d\n", get_sfilter(filtn),
-							options->filter_g[k].cd_values[0]);
-					break;
-				default:
-					printf(" User Defined %d\n", filtn);
-					break;
-				} /* k */
-			};
-		}
-	} /* verbose */
-
-	for (i = 0; i < options->op_tbl->nelems; i++) {
-		pack_info_t pack = options->op_tbl->objs[i];
-		char* name = pack.path;
-
-		for (j = 0; j < pack.nfilters; j++) {
-			if (options->verbose) {
-				printf(" <%s> with %s filter\n", name,
-						get_sfilter(pack.filter[j].filtn));
-			}
-
-			has_cp = 1;
-
-		} /* j */
-	} /* i */
-
-	if (options->all_filter == 1 && has_cp) {
-		error_msg(
-				"invalid compression input: 'all' option\
+        return -1;
+    }
+
+    /*-------------------------------------------------------------------------
+    * objects to filter
+    *-------------------------------------------------------------------------
+    */
+
+    if (options->verbose && have_request(options) /* only print if requested */) {
+        printf("Objects to apply filter are...\n");
+        if (options->all_filter == 1) {
+            for (k = 0; k < options->n_filter_g; k++) {
+                H5Z_filter_t filtn = options->filter_g[k].filtn;
+                switch (filtn) {
+                case H5Z_FILTER_NONE:
+                    printf(" Uncompress all\n");
+                    break;
+                case H5Z_FILTER_SHUFFLE:
+                case H5Z_FILTER_FLETCHER32:
+                    printf(" All with %s\n", get_sfilter(filtn));
+                    break;
+                case H5Z_FILTER_SZIP:
+                case H5Z_FILTER_DEFLATE:
+                    printf(" All with %s, parameter %d\n", get_sfilter(filtn),
+                            options->filter_g[k].cd_values[0]);
+                    break;
+                default:
+                    printf(" User Defined %d\n", filtn);
+                    break;
+                } /* k */
+            };
+        }
+    } /* verbose */
+
+    for (i = 0; i < options->op_tbl->nelems; i++) {
+        pack_info_t pack = options->op_tbl->objs[i];
+        char* name = pack.path;
+
+        for (j = 0; j < pack.nfilters; j++) {
+            if (options->verbose) {
+                printf(" <%s> with %s filter\n", name,
+                        get_sfilter(pack.filter[j].filtn));
+            }
+
+            has_cp = 1;
+
+        } /* j */
+    } /* i */
+
+    if (options->all_filter == 1 && has_cp) {
+        error_msg(
+                "invalid compression input: 'all' option\
                             is present with other objects\n");
-		return -1;
-	}
-
-	/*-------------------------------------------------------------------------
-	 * check options for the latest format
-	 *-------------------------------------------------------------------------
-	 */
-
-	if (options->grp_compact < 0) {
-		error_msg(
-				"invalid maximum number of links to store as header messages\n");
-		return -1;
-	}
-	if (options->grp_indexed < 0) {
-		error_msg(
-				"invalid minimum number of links to store in the indexed format\n");
-		return -1;
-	}
-	if (options->grp_indexed > options->grp_compact) {
-		error_msg(
-				"minimum indexed size is greater than the maximum compact size\n");
-		return -1;
-	}
-	for (i = 0; i < 8; i++) {
-		if (options->msg_size[i] < 0) {
-			error_msg("invalid shared message size\n");
-			return -1;
-		}
-	}
-
-	/*--------------------------------------------------------------------------------
-	 * verify new user userblock options; file name must be present
-	 *---------------------------------------------------------------------------------
-	 */
-	if (options->ublock_filename != NULL && options->ublock_size == 0) {
-		if (options->verbose) {
-			printf(
-					"Warning: user block size missing for file %s. Assigning a default size of 1024...\n",
-					options->ublock_filename);
-			options->ublock_size = 1024;
-		}
-	}
-
-	if (options->ublock_filename == NULL && options->ublock_size != 0) {
-		error_msg("file name missing for user block\n",
-				options->ublock_filename);
-		return -1;
-	}
-
-	/*--------------------------------------------------------------------------------
-	 * verify alignment options; threshold is zero default but alignment not
-	 *---------------------------------------------------------------------------------
-	 */
-
-	if (options->alignment == 0 && options->threshold != 0) {
-		error_msg("alignment for H5Pset_alignment missing\n");
-		return -1;
-	}
-
-	return 0;
+        return -1;
+    }
+
+    /*-------------------------------------------------------------------------
+    * check options for the latest format
+    *-------------------------------------------------------------------------
+    */
+
+    if (options->grp_compact < 0) {
+        error_msg(
+                "invalid maximum number of links to store as header messages\n");
+        return -1;
+    }
+    if (options->grp_indexed < 0) {
+        error_msg(
+                "invalid minimum number of links to store in the indexed format\n");
+        return -1;
+    }
+    if (options->grp_indexed > options->grp_compact) {
+        error_msg(
+                "minimum indexed size is greater than the maximum compact size\n");
+        return -1;
+    }
+    for (i = 0; i < 8; i++) {
+        if (options->msg_size[i] < 0) {
+            error_msg("invalid shared message size\n");
+            return -1;
+        }
+    }
+
+    /*--------------------------------------------------------------------------------
+    * verify new user userblock options; file name must be present
+    *---------------------------------------------------------------------------------
+    */
+    if (options->ublock_filename != NULL && options->ublock_size == 0) {
+        if (options->verbose) {
+            printf(
+                    "Warning: user block size missing for file %s. Assigning a default size of 1024...\n",
+                    options->ublock_filename);
+            options->ublock_size = 1024;
+        }
+    }
+
+    if (options->ublock_filename == NULL && options->ublock_size != 0) {
+        error_msg("file name missing for user block\n",
+                options->ublock_filename);
+        return -1;
+    }
+
+    /*--------------------------------------------------------------------------------
+    * verify alignment options; threshold is zero default but alignment not
+    *---------------------------------------------------------------------------------
+    */
+
+    if (options->alignment == 0 && options->threshold != 0) {
+        error_msg("alignment for H5Pset_alignment missing\n");
+        return -1;
+    }
+
+    return 0;
 }
 
 /*-------------------------------------------------------------------------
@@ -769,119 +757,119 @@ static int check_options(pack_opt_t *options) {
  *-------------------------------------------------------------------------
  */
 static int check_objects(const char* fname, pack_opt_t *options) {
-	hid_t fid;
-	unsigned int i;
-	trav_table_t *travt = NULL;
-
-	/* nothing to do */
-	if (options->op_tbl->nelems == 0)
-		return 0;
-
-	/*-------------------------------------------------------------------------
-	 * open the file
-	 *-------------------------------------------------------------------------
-	 */
-	if ((fid = h5tools_fopen(fname, H5F_ACC_RDONLY, H5P_DEFAULT, NULL, NULL, 0))
-			< 0) {
-		printf("<%s>: %s\n", fname, H5FOPENERROR);
-		return -1;
-	}
-
-	/*-------------------------------------------------------------------------
-	 * get the list of objects in the file
-	 *-------------------------------------------------------------------------
-	 */
-
-	/* init table */
-	trav_table_init(&travt);
-
-	/* get the list of objects in the file */
-	if (h5trav_gettable(fid, travt) < 0)
-		goto out;
-
-	/*-------------------------------------------------------------------------
-	 * compare with user supplied list
-	 *-------------------------------------------------------------------------
-	 */
-
-	if (options->verbose)
-		printf("Opening file <%s>. Searching for objects to modify...\n",
-				fname);
-
-	for (i = 0; i < options->op_tbl->nelems; i++) {
-		char* name = options->op_tbl->objs[i].path;
-		if (options->verbose)
-			printf(" <%s>", name);
-
-		/* the input object names are present in the file and are valid */
-		if (h5trav_getindext(name, travt) < 0) {
-			error_msg("%s Could not find <%s> in file <%s>. Exiting...\n",
-					(options->verbose ? "\n" : ""), name, fname);
-			goto out;
-		}
-		if (options->verbose)
-			printf("...Found\n");
-
-		/* check for extra filter conditions */
-		switch (options->op_tbl->objs[i].filter->filtn) {
-		/* chunk size must be smaller than pixels per block */
-		case H5Z_FILTER_SZIP:
-			{
-				int j;
-				hsize_t csize = 1;
-				unsigned ppb = options->op_tbl->objs[i].filter->cd_values[0];
-				hsize_t dims[H5S_MAX_RANK];
-				int rank;
-				hid_t did;
-				hid_t sid;
-
-				if (options->op_tbl->objs[i].chunk.rank > 0) {
-					rank = options->op_tbl->objs[i].chunk.rank;
-					for (j = 0; j < rank; j++)
-						csize *= options->op_tbl->objs[i].chunk.chunk_lengths[j];
-				}
-				else {
-					if ((did = H5Dopen2(fid, name, H5P_DEFAULT)) < 0)
-						goto out;
-					if ((sid = H5Dget_space(did)) < 0)
-						goto out;
-					if ((rank = H5Sget_simple_extent_ndims(sid)) < 0)
-						goto out;
-					HDmemset(dims, 0, sizeof dims);
-					if (H5Sget_simple_extent_dims(sid, dims, NULL) < 0)
-						goto out;
-					for (j = 0; j < rank; j++)
-						csize *= dims[j];
-					if (H5Sclose(sid) < 0)
-						goto out;
-					if (H5Dclose(did) < 0)
-						goto out;
-				}
-
-				if (csize < ppb) {
-					printf(
-							" <warning: SZIP settins, chunk size is smaller than pixels per block>\n");
-					goto out;
-				}
-			}
-			break;
-		default:
-			break;
-		}
-	} /* i */
-
-	/*-------------------------------------------------------------------------
-	 * close
-	 *-------------------------------------------------------------------------
-	 */
-	H5Fclose(fid);
-	trav_table_free(travt);
-	return 0;
+    hid_t         fid;
+    unsigned int  i;
+    trav_table_t *travt = NULL;
+
+    /* nothing to do */
+    if (options->op_tbl->nelems == 0)
+        return 0;
+
+    /*-------------------------------------------------------------------------
+    * open the file
+    *-------------------------------------------------------------------------
+    */
+    if ((fid = h5tools_fopen(fname, H5F_ACC_RDONLY, H5P_DEFAULT, NULL, NULL, 0))
+            < 0) {
+        printf("<%s>: %s\n", fname, H5FOPENERROR);
+        return -1;
+    }
+
+    /*-------------------------------------------------------------------------
+    * get the list of objects in the file
+    *-------------------------------------------------------------------------
+    */
+
+    /* init table */
+    trav_table_init(&travt);
+
+    /* get the list of objects in the file */
+    if (h5trav_gettable(fid, travt) < 0)
+        goto out;
+
+    /*-------------------------------------------------------------------------
+    * compare with user supplied list
+    *-------------------------------------------------------------------------
+    */
+
+    if (options->verbose)
+        printf("Opening file <%s>. Searching for objects to modify...\n",
+                fname);
+
+    for (i = 0; i < options->op_tbl->nelems; i++) {
+        char* name = options->op_tbl->objs[i].path;
+        if (options->verbose)
+            printf(" <%s>", name);
+
+        /* the input object names are present in the file and are valid */
+        if (h5trav_getindext(name, travt) < 0) {
+            error_msg("%s Could not find <%s> in file <%s>. Exiting...\n",
+                    (options->verbose ? "\n" : ""), name, fname);
+            goto out;
+        }
+        if (options->verbose)
+            printf("...Found\n");
+
+        /* check for extra filter conditions */
+        switch (options->op_tbl->objs[i].filter->filtn) {
+        /* chunk size must be smaller than pixels per block */
+        case H5Z_FILTER_SZIP:
+            {
+                int j;
+                hsize_t csize = 1;
+                unsigned ppb = options->op_tbl->objs[i].filter->cd_values[0];
+                hsize_t dims[H5S_MAX_RANK];
+                int rank;
+                hid_t did;
+                hid_t sid;
+
+                if (options->op_tbl->objs[i].chunk.rank > 0) {
+                    rank = options->op_tbl->objs[i].chunk.rank;
+                    for (j = 0; j < rank; j++)
+                        csize *= options->op_tbl->objs[i].chunk.chunk_lengths[j];
+                }
+                else {
+                    if ((did = H5Dopen2(fid, name, H5P_DEFAULT)) < 0)
+                        goto out;
+                    if ((sid = H5Dget_space(did)) < 0)
+                        goto out;
+                    if ((rank = H5Sget_simple_extent_ndims(sid)) < 0)
+                        goto out;
+                    HDmemset(dims, 0, sizeof dims);
+                    if (H5Sget_simple_extent_dims(sid, dims, NULL) < 0)
+                        goto out;
+                    for (j = 0; j < rank; j++)
+                        csize *= dims[j];
+                    if (H5Sclose(sid) < 0)
+                        goto out;
+                    if (H5Dclose(did) < 0)
+                        goto out;
+                }
+
+                if (csize < ppb) {
+                    printf(
+                            " <warning: SZIP settins, chunk size is smaller than pixels per block>\n");
+                    goto out;
+                }
+            }
+            break;
+        default:
+            break;
+        }
+    } /* i */
+
+    /*-------------------------------------------------------------------------
+    * close
+    *-------------------------------------------------------------------------
+    */
+    H5Fclose(fid);
+    trav_table_free(travt);
+    return 0;
 
 out:
-	H5Fclose(fid);
-	trav_table_free(travt);
-	return -1;
+    H5Fclose(fid);
+    trav_table_free(travt);
+    return -1;
 }
 
 /*-------------------------------------------------------------------------
@@ -897,10 +885,10 @@ out:
  */
 static int have_request(pack_opt_t *options) {
 
-	if (options->all_filter || options->all_layout || options->op_tbl->nelems)
-		return 1;
+    if (options->all_filter || options->all_layout || options->op_tbl->nelems)
+        return 1;
 
-	return 0;
+    return 0;
 
 }
 
@@ -915,21 +903,21 @@ static int have_request(pack_opt_t *options) {
  */
 
 static const char* get_sfilter(H5Z_filter_t filtn) {
-	if (filtn == H5Z_FILTER_NONE)
-		return "NONE";
-	else if (filtn == H5Z_FILTER_DEFLATE)
-		return "GZIP";
-	else if (filtn == H5Z_FILTER_SZIP)
-		return "SZIP";
-	else if (filtn == H5Z_FILTER_SHUFFLE)
-		return "SHUFFLE";
-	else if (filtn == H5Z_FILTER_FLETCHER32)
-		return "FLETCHER32";
-	else if (filtn == H5Z_FILTER_NBIT)
-		return "NBIT";
-	else if (filtn == H5Z_FILTER_SCALEOFFSET)
-		return "SOFF";
-	else
-		return "UD";
+    if (filtn == H5Z_FILTER_NONE)
+        return "NONE";
+    else if (filtn == H5Z_FILTER_DEFLATE)
+        return "GZIP";
+    else if (filtn == H5Z_FILTER_SZIP)
+        return "SZIP";
+    else if (filtn == H5Z_FILTER_SHUFFLE)
+        return "SHUFFLE";
+    else if (filtn == H5Z_FILTER_FLETCHER32)
+        return "FLETCHER32";
+    else if (filtn == H5Z_FILTER_NBIT)
+        return "NBIT";
+    else if (filtn == H5Z_FILTER_SCALEOFFSET)
+        return "SOFF";
+    else
+        return "UD";
 }
 
diff --git a/tools/h5repack/h5repack.h b/tools/h5repack/h5repack.h
index 6bed05e..9049472 100644
--- a/tools/h5repack/h5repack.h
+++ b/tools/h5repack/h5repack.h
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 
diff --git a/tools/h5repack/h5repack.sh.in b/tools/h5repack/h5repack.sh.in
index 966aedf..d634904 100644
--- a/tools/h5repack/h5repack.sh.in
+++ b/tools/h5repack/h5repack.sh.in
@@ -6,19 +6,17 @@
 #
 # This file is part of HDF5.  The full HDF5 copyright notice, including
 # terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
 #
 # Tests for the h5repack tool
 #
 # Modification:
 #  Pedro Vicente Nunes, 11/15/2006
 #  Added $FILEN variables for file names
-#   
+#
 
 srcdir=@srcdir@
 
@@ -47,8 +45,8 @@ DIRNAME='dirname'
 LS='ls'
 AWK='awk'
 
-H5DETECTSZIP=testh5repack_detect_szip              
-H5DETECTSZIP_BIN=`pwd`/$H5DETECTSZIP    
+H5DETECTSZIP=testh5repack_detect_szip
+H5DETECTSZIP_BIN=`pwd`/$H5DETECTSZIP
 
 
 nerrors=0
@@ -150,10 +148,10 @@ COPY_TESTFILES_TO_TESTDIR()
             INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
             INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
             if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-    	        $CP -f $tstfile $TESTDIR
+                $CP -f $tstfile $TESTDIR
                 if [ $? -ne 0 ]; then
                     echo "Error: FAILED to copy $tstfile ."
-                
+
                     # Comment out this to CREATE expected file
                     exit $EXIT_FAILURE
                 fi
@@ -205,12 +203,12 @@ SKIP() {
 
 # Call the h5diff tool
 #
-DIFFTEST() 
+DIFFTEST()
 {
     VERIFY h5diff output $@
     (
         cd $TESTDIR
-        $RUNSERIAL $H5DIFF_BIN -q  "$@" 
+        $RUNSERIAL $H5DIFF_BIN -q  "$@"
     )
     RET=$?
     if [ $RET != 0 ] ; then
@@ -219,7 +217,7 @@ DIFFTEST()
     else
          echo " PASSED"
     fi
-        
+
 }
 
 # Call h5repack
@@ -227,7 +225,7 @@ DIFFTEST()
 
 
 # call TOOLTEST_MAIN and delete $output file
-TOOLTEST() 
+TOOLTEST()
 {
     echo $@
     infile=$2
@@ -253,7 +251,7 @@ TOOLTEST()
 }
 
 #------------------------------------------
-# Verifying layouts of a dataset 
+# Verifying layouts of a dataset
 VERIFY_LAYOUT_DSET()
 {
     layoutfile=layout-$1.$2
@@ -265,9 +263,9 @@ VERIFY_LAYOUT_DSET()
     shift
     shift
     shift
-   
+
     TESTING  $H5REPACK $@
-    ( 
+    (
         cd $TESTDIR
         $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
     )
@@ -279,7 +277,7 @@ VERIFY_LAYOUT_DSET()
         echo " PASSED"
         DIFFTEST $infile $outfile
     fi
-    
+
     #---------------------------------
     # check the layout from a dataset
     VERIFY  "a dataset layout"
@@ -311,9 +309,9 @@ VERIFY_LAYOUT_ALL()
     shift
     shift
     shift
-    
+
     TESTING  $H5REPACK $@
-    ( 
+    (
         cd $TESTDIR
         $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
     )
@@ -325,8 +323,8 @@ VERIFY_LAYOUT_ALL()
         echo " PASSED"
         DIFFTEST $infile $outfile
     fi
-    
-    
+
+
     #---------------------------------
     # check the layout from a dataset
     # check if the other layouts still exsit
@@ -353,7 +351,7 @@ VERIFY_LAYOUT_ALL()
                     echo " PASSED"
                 fi
             fi
-        else    
+        else
             # if COMPACT
             if [ $expectlayout = "COMPACT" ]; then
                 TESTING $H5DUMP_BIN -pH $outfile
@@ -405,7 +403,7 @@ VERIFY_LAYOUT_ALL()
 
 # same as TOOLTEST, but it uses the old syntax -i input_file -o output_file
 #
-TOOLTEST0() 
+TOOLTEST0()
 {
     infile=$2
     outfile=out-$1.$2
@@ -433,7 +431,7 @@ TOOLTEST0()
 # same as TOOLTEST, but it uses without -i -o options
 # used to test the family driver, where these files reside
 #
-TOOLTEST1() 
+TOOLTEST1()
 {
     infile=$2
     outfile=out-$1.$2
@@ -448,21 +446,21 @@ TOOLTEST1()
     )
     RET=$?
     if [ $RET != 0 ] ; then
-	echo "*FAILED*"
-	nerrors="`expr $nerrors + 1`"
+    echo "*FAILED*"
+    nerrors="`expr $nerrors + 1`"
     else
-	echo " PASSED"
-	DIFFTEST $infile $outfile
+    echo " PASSED"
+    DIFFTEST $infile $outfile
     fi
     rm -f $outfile
 }
-          
+
 # This is same as TOOLTEST() with comparing display output
 # from -v option
 #
-TOOLTESTV() 
+TOOLTESTV()
 {
-    expect="$TESTDIR/$2.tst"
+    expect="$TESTDIR/$2-$1.tst"
     actual="$TESTDIR/`basename $2 .ddl`.out"
     actual_err="$TESTDIR/`basename $2 .ddl`.err"
 
@@ -470,7 +468,7 @@ TOOLTESTV()
     outfile=out-$1.$2
     shift
     shift
-    
+
     # Run test.
     TESTING $H5REPACK $@
     (
@@ -479,11 +477,11 @@ TOOLTESTV()
     ) >$actual 2>$actual_err
     RET=$?
     if [ $RET != 0 ] ; then
-	echo "*FAILED*"
-	nerrors="`expr $nerrors + 1`"
+    echo "*FAILED*"
+    nerrors="`expr $nerrors + 1`"
     else
-	echo " PASSED"
-	DIFFTEST $infile $outfile
+    echo " PASSED"
+    DIFFTEST $infile $outfile
     fi
 
     # display output compare
@@ -499,7 +497,7 @@ TOOLTESTV()
      nerrors="`expr $nerrors + 1`"
      test yes = "$verbose" && diff -c $expect $actual |sed 's/^/    /'
     fi
-    
+
    rm -f $actual $actual_err
    rm -f $outfile
 }
@@ -507,7 +505,7 @@ TOOLTESTV()
 # This is same as TOOLTESTV() with comparing h5dump output
 # from -pH option
 #
-TOOLTEST_DUMP() 
+TOOLTEST_DUMP()
 {
     infile=$2
     outfile=out-$1.$2
@@ -517,7 +515,7 @@ TOOLTEST_DUMP()
 
     shift
     shift
-    
+
     # Run test.
     TESTING $H5REPACK $@
     (
@@ -533,12 +531,12 @@ TOOLTEST_DUMP()
      VERIFY h5dump output $@
      (
         cd $TESTDIR
-        $RUNSERIAL $H5DUMP_BIN -pH $outfile 
+        $RUNSERIAL $H5DUMP_BIN -pH $outfile
      ) >$actual 2>$actual_err
      cat $actual_err >> $actual
 
      RET=$?
-          
+
     fi
 
     if cmp -s $expect $actual; then
@@ -549,7 +547,7 @@ TOOLTEST_DUMP()
      nerrors="`expr $nerrors + 1`"
      test yes = "$verbose" && diff -c $expect $actual |sed 's/^/    /'
     fi
-    
+
    rm -f $actual $actual_err
    rm -f $outfile
 }
@@ -613,16 +611,17 @@ TOOLTEST_META()
     # verify sizes.
     MESSAGE "Verify the sizes of both output files ($size1 vs $size2)"
     if [ $size1 -lt $size2 ]; then
-    	# pass
-	echo " PASSED"
+        # pass
+    echo " PASSED"
     else
-	#fail
-	echo "*FAILED*"
+    #fail
+    echo "*FAILED*"
         nerrors="`expr $nerrors + 1`"
     fi
-    
+
     rm -f $outfile
 }
+
 # ADD_HELP_TEST
 TOOLTEST_HELP() {
 
@@ -643,6 +642,8 @@ TOOLTEST_HELP() {
     # Create the expect data file if it doesn't yet exist.
       echo " CREATED"
       cp $actual $expect-CREATED
+      echo "    Expected result (*.txt) missing"
+      nerrors="`expr $nerrors + 1`"
     elif cmp -s $expect $actual; then
       echo " PASSED"
     else
@@ -650,7 +651,7 @@ TOOLTEST_HELP() {
       echo "    Expected output (*.txt) differs from actual output (*.out)"
       nerrors="`expr $nerrors + 1`"
     fi
-    
+
     # Clean up output file
     if test -z "$HDF5_NOCLEANUP"; then
      rm -f $actual $actual_err
@@ -676,28 +677,28 @@ STDOUT_FILTER() {
 # Each run generates "<file>.out.h5" and the tool h5diff is used to
 # compare the input and output files
 #
-# the tests are the same as the program h5repacktst, but run from the CLI 
+# the tests are the same as the program h5repacktst, but run from the CLI
 #
 
 # See which filters are usable (and skip tests for filters we
 # don't have).  Do this by searching H5pubconf.h to see which
 # filters are defined.
 
-# detect whether the encoder is present. 
+# detect whether the encoder is present.
 USE_FILTER_SZIP_ENCODER="no";
 if test $USE_FILTER_SZIP = "yes"; then
 USE_FILTER_SZIP_ENCODER=`$RUNSERIAL $H5DETECTSZIP_BIN`
 fi
 
 ##############################################################################
-###			  T H E   T E S T S                               
+###              T H E   T E S T S
 ##############################################################################
 # prepare for test
 COPY_TESTFILES_TO_TESTDIR
 
 TOOLTEST_HELP h5repack-help.txt -h
 
-# copy files (these files have no filters) 
+# copy files (these files have no filters)
 TOOLTEST fill h5repack_fill.h5
 TOOLTEST objs h5repack_objs.h5
 TOOLTEST attr h5repack_attr.h5
@@ -721,8 +722,8 @@ if test  $USE_FILTER_DEFLATE != "yes" ; then
 else
  TOOLTEST gzip_individual $arg
 fi
-  
-# gzip for all 
+
+# gzip for all
 arg="h5repack_layout.h5 -f GZIP=1"
 if test  $USE_FILTER_DEFLATE != "yes" ; then
  SKIP $arg
@@ -735,7 +736,7 @@ arg="h5repack_layout.h5 -f dset2:SZIP=8,EC  -l dset2:CHUNK=20x10"
 if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
  SKIP $arg
 else
- TOOLTEST szip_individual $arg 
+ TOOLTEST szip_individual $arg
 fi
 
 # szip for all
@@ -743,18 +744,18 @@ arg="h5repack_layout.h5 -f SZIP=8,NN"
 if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
  SKIP $arg
 else
- TOOLTEST szip_all $arg 
+ TOOLTEST szip_all $arg
 fi
 
 # shuffle with individual object
 arg="h5repack_layout.h5 -f dset2:SHUF  -l dset2:CHUNK=20x10"
-TOOLTEST shuffle_individual $arg 
-  
+TOOLTEST shuffle_individual $arg
+
 
 # shuffle for all
 arg="h5repack_layout.h5 -f SHUF"
 TOOLTEST shuffle_all $arg
-  
+
 # fletcher32  with individual object
 arg="h5repack_layout.h5 -f dset2:FLET  -l dset2:CHUNK=20x10"
 TOOLTEST fletcher_individual $arg
@@ -779,7 +780,7 @@ else
  # compare output
  TOOLTESTV gzip_verbose_filters $arg
 fi
-  
+
 ###########################################################
 # the following tests assume the input files have filters
 ###########################################################
@@ -791,7 +792,7 @@ if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
 else
  TOOLTEST szip_copy $arg
 fi
-  
+
 # szip remove
 arg="h5repack_szip.h5 --filter=dset_szip:NONE"
 if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
@@ -799,7 +800,7 @@ if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" ; then
 else
  TOOLTEST szip_remove $arg
 fi
-  
+
 # deflate copy
 arg="h5repack_deflate.h5"
 if test $USE_FILTER_DEFLATE != "yes" ; then
@@ -815,7 +816,7 @@ if test $USE_FILTER_DEFLATE != "yes" ; then
 else
  TOOLTEST deflate_remove $arg
 fi
-    
+
 # shuffle copy
 arg="h5repack_shuffle.h5"
 TOOLTEST shuffle_copy $arg
@@ -870,14 +871,14 @@ arg="h5repack_deflate.h5 -f dset_deflate:SZIP=8,NN"
 if test $USE_FILTER_SZIP_ENCODER != "yes" -o $USE_FILTER_SZIP != "yes" -o $USE_FILTER_DEFLATE != "yes" ; then
  SKIP $arg
 else
- TOOLTEST deflate_convert $arg 
+ TOOLTEST deflate_convert $arg
 fi
 
 arg="h5repack_szip.h5 -f dset_szip:GZIP=1"
 if test $USE_FILTER_SZIP != "yes" -o $USE_FILTER_SZIP_ENCODER != "yes"  -o $USE_FILTER_DEFLATE != "yes" ; then
  SKIP $arg
 else
- TOOLTEST szip_convert $arg 
+ TOOLTEST szip_convert $arg
 fi
 
 
@@ -892,9 +893,9 @@ fi
 #file
 arg="h5repack_layout.h5 -e h5repack.info"
 if test $USE_FILTER_DEFLATE != "yes" ; then
- SKIP $arg 
+ SKIP $arg
 else
- TOOLTEST deflate_file $arg 
+ TOOLTEST deflate_file $arg
 fi
 
 #########################################################
@@ -939,18 +940,18 @@ VERIFY_LAYOUT_DSET contig_small_compa h5repack_layout2.h5 contig_small COMPACT -
 
 VERIFY_LAYOUT_DSET contig_small_fixed_compa h5repack_layout2.h5 chunked_small_fixed COMPACT -l chunked_small_fixed:COMPA
 
-#--------------------------------------------------------------------------- 
-# Test file contains chunked datasets (need multiple dsets) with 
+#---------------------------------------------------------------------------
+# Test file contains chunked datasets (need multiple dsets) with
 # unlimited max dims.   (HDFFV-7933)
 # Use first dset to test.
 #---------------------------------------------------------------------------
 # chunk to chunk - specify chunk dim bigger than any current dim
 VERIFY_LAYOUT_DSET chunk2chunk h5repack_layout3.h5 chunk_unlimit1 CHUNK -l chunk_unlimit1:CHUNK=100x300
 
-# chunk to contiguous 
+# chunk to contiguous
 VERIFY_LAYOUT_DSET chunk2conti h5repack_layout3.h5 chunk_unlimit1 CONTI -l chunk_unlimit1:CONTI
 
-# chunk to compact - convert big dataset (should be > 64k) for this purpose, 
+# chunk to compact - convert big dataset (should be > 64k) for this purpose,
 # should remain as original layout (chunk)
 VERIFY_LAYOUT_DSET chunk2compa h5repack_layout3.h5 chunk_unlimit1 CHUNK -l chunk_unlimit1:COMPA
 
@@ -958,7 +959,7 @@ VERIFY_LAYOUT_DSET chunk2compa h5repack_layout3.h5 chunk_unlimit1 CHUNK -l chunk
 # Test -f for some specific cases. Chunked dataset with unlimited max dims.
 # (HDFFV-8012)
 #--------------------------------------------------------------------------
-# - should not fail 
+# - should not fail
 # - should not change max dims from unlimit
 
 # chunk dim is bigger than dataset dim. ( dset size < 64k )
@@ -974,14 +975,14 @@ VERIFY_LAYOUT_DSET error3 h5repack_layout3.h5 chunk_unlimit3 H5S_UNLIMITED -f ch
 TOOLTEST error4 h5repack_layout3.h5 -f NONE
 
 #--------------------------------------------------------------------------
-# Test base: Convert CHUNK to CONTI for a chunked dataset with small dataset 
+# Test base: Convert CHUNK to CONTI for a chunked dataset with small dataset
 # (dset size < 64K) and with unlimited max dims on a condition as follow.
 # (HDFFV-8214)
 #--------------------------------------------------------------------------
 
 # chunk dim is bigger than dataset dim. should succeed.
 VERIFY_LAYOUT_DSET ckdim_biger h5repack_layout3.h5 chunk_unlimit2 CONTI -l chunk_unlimit2:CONTI
-# chunk dim is smaller than dataset dim. should succeed.  
+# chunk dim is smaller than dataset dim. should succeed.
 VERIFY_LAYOUT_DSET ckdim_smaller h5repack_layout3.h5 chunk_unlimit3 CONTI -l chunk_unlimit3:CONTI
 
 
@@ -1024,7 +1025,7 @@ if test $USE_FILTER_DEFLATE != "yes" ; then
  SKIP $arg
 else
  TOOLTEST0 old_style_layout_short_switches $arg
-fi 
+fi
 
 # add a userblock to file
 arg="h5repack_objs.h5 -u ublock.bin -b 2048"
@@ -1051,17 +1052,17 @@ TOOLTEST1 family tfamily%05d.h5
 TOOLTEST bug1814 h5repack_refs.h5
 
 # test attribute with various references (bug1797 / HDFFV-5932)
-# the references in attribute of compund or vlen datatype 
-TOOLTEST HDFFV-5932 h5repack_attr_refs.h5 
+# the references in attribute of compund or vlen datatype
+TOOLTEST HDFFV-5932 h5repack_attr_refs.h5
 
-# Add test for memory leak in attirbute. This test is verified by CTEST.   
-# 1. leak from vlen string  
+# Add test for memory leak in attirbute. This test is verified by CTEST.
+# 1. leak from vlen string
 # 2. leak from compound type without reference member
 # (HDFFV-7840, )
 # Note: this test is experimental for sharing test file among tools
 TOOLTEST HDFFV-7840 h5diff_attr1.h5
 
-# tests for metadata block size option 
+# tests for metadata block size option
 TOOLTEST_META meta_short h5repack_layout.h5 -M 8192
 TOOLTEST_META meta_long h5repack_layout.h5 --metadata_block_size=8192
 
diff --git a/tools/h5repack/h5repack_copy.c b/tools/h5repack/h5repack_copy.c
index c31f400..40c3888 100644
--- a/tools/h5repack/h5repack_copy.c
+++ b/tools/h5repack/h5repack_copy.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include "h5repack.h"
@@ -54,12 +52,12 @@
  *-------------------------------------------------------------------------
  */
 static int Get_hyperslab(hid_t dcpl_id, int rank_dset, hsize_t dims_dset[],
-		size_t size_datum, hsize_t dims_hslab[], hsize_t * hslab_nbytes_p);
+        size_t size_datum, hsize_t dims_hslab[], hsize_t * hslab_nbytes_p);
 static void print_dataset_info(hid_t dcpl_id, char *objname, double per, int pr);
 static int do_copy_objects(hid_t fidin, hid_t fidout, trav_table_t *travt,
-		pack_opt_t *options);
+        pack_opt_t *options);
 static int copy_user_block(const char *infile, const char *outfile,
-		hsize_t size);
+        hsize_t size);
 #if defined (H5REPACK_DEBUG_USER_BLOCK)
 static void print_user_block(const char *filename, hid_t fid);
 #endif
@@ -67,18 +65,19 @@ static herr_t walk_error_callback(unsigned n, const H5E_error2_t *err_desc, void
 
 /* get the major number from the error stack. */
 static herr_t walk_error_callback(H5_ATTR_UNUSED unsigned n, const H5E_error2_t *err_desc, void *udata) {
-	if (err_desc)
-		*((hid_t *) udata) = err_desc->maj_num;
+    if (err_desc)
+        *((hid_t *) udata) = err_desc->maj_num;
 
-	return 0;
+    return 0;
 }
 
 /*-------------------------------------------------------------------------
  * Function: copy_objects
  *
- * Purpose: duplicate all HDF5 objects in the file
+ * Purpose:  duplicate all HDF5 objects in the file
  *
- * Return: 0, ok, -1 no
+ * Return:   0, ok,
+ *          -1 no
  *
  * Programmer: Pedro Vicente, pvn@ncsa.uiuc.edu
  *
@@ -89,13 +88,13 @@ static herr_t walk_error_callback(H5_ATTR_UNUSED unsigned n, const H5E_error2_t
 
 int copy_objects(const char* fnamein, const char* fnameout, pack_opt_t *options)
 {
-    int   	  ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
+    int           ret_value = 0;          /* no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
     hid_t         fidin;
     hid_t         fidout = -1;
     trav_table_t  *travt = NULL;
-    hsize_t       ub_size = 0;        	/* size of user block */
-    hid_t         fcpl = H5P_DEFAULT; 	/* file creation property list ID */
-    hid_t         fapl = H5P_DEFAULT; 	/* file access property list ID */
+    hsize_t       ub_size = 0;            /* size of user block */
+    hid_t         fcpl = H5P_DEFAULT;     /* file creation property list ID */
+    hid_t         fapl = H5P_DEFAULT;     /* file access property list ID */
 
     /*-------------------------------------------------------------------------
      * open input file
@@ -434,10 +433,10 @@ done:
 int Get_hyperslab(hid_t dcpl_id, int rank_dset, hsize_t dims_dset[],
         size_t size_datum, hsize_t dims_hslab[], hsize_t * hslab_nbytes_p)
 {
-    int ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
-    int k;
+    int     ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
+    int     k;
     H5D_layout_t dset_layout;
-    int rank_chunk;
+    int     rank_chunk;
     hsize_t dims_chunk[H5S_MAX_RANK];
     hsize_t size_chunk = 1;
     hsize_t nchunk_fit; /* number of chunks that fits in hyperslab buffer (H5TOOLS_BUFSIZE) */
@@ -649,36 +648,36 @@ done:
  */
 
 int do_copy_objects(hid_t fidin, hid_t fidout, trav_table_t *travt,
-		pack_opt_t *options) /* repack options */
+        pack_opt_t *options) /* repack options */
 {
     int   ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
-    hid_t grp_in = -1; /* group ID */
-    hid_t grp_out = -1; /* group ID */
-    hid_t dset_in = -1; /* read dataset ID */
+    hid_t grp_in = -1;   /* group ID */
+    hid_t grp_out = -1;  /* group ID */
+    hid_t dset_in = -1;  /* read dataset ID */
     hid_t dset_out = -1; /* write dataset ID */
-    hid_t gcpl_in = -1; /* group creation property list */
+    hid_t gcpl_in = -1;  /* group creation property list */
     hid_t gcpl_out = -1; /* group creation property list */
-    hid_t type_in = -1; /* named type ID */
+    hid_t type_in = -1;  /* named type ID */
     hid_t type_out = -1; /* named type ID */
-    hid_t dcpl_in = -1; /* dataset creation property list ID */
+    hid_t dcpl_in = -1;  /* dataset creation property list ID */
     hid_t dcpl_out = -1; /* dataset creation property list ID */
     hid_t f_space_id = -1; /* file space ID */
     hid_t ftype_id = -1; /* file type ID */
     hid_t wtype_id = -1; /* read/write type ID */
     named_dt_t *named_dt_head = NULL; /* Pointer to the stack of named datatypes copied */
-    size_t msize; /* size of type */
-    hsize_t nelmts; /* number of elements in dataset */
+    size_t msize;        /* size of type */
+    hsize_t nelmts;      /* number of elements in dataset */
     H5D_space_status_t space_status; /* determines whether space has been allocated for the dataset  */
-    int rank; /* rank of dataset */
+    int rank;            /* rank of dataset */
     hsize_t dims[H5S_MAX_RANK];/* dimensions of dataset */
-    hsize_t dsize_in; /* input dataset size before filter */
-    hsize_t dsize_out; /* output dataset size after filter */
-    int apply_s; /* flag for apply filter to small dataset sizes */
-    int apply_f; /* flag for apply filter to return error on H5Dcreate */
-    void *buf = NULL; /* buffer for raw data */
+    hsize_t dsize_in;    /* input dataset size before filter */
+    hsize_t dsize_out;   /* output dataset size after filter */
+    int apply_s;         /* flag for apply filter to small dataset sizes */
+    int apply_f;         /* flag for apply filter to return error on H5Dcreate */
+    void *buf = NULL;    /* buffer for raw data */
     void *hslab_buf = NULL; /* hyperslab buffer for raw data */
-    int has_filter; /* current object has a filter */
-    int req_filter; /* there was a request for a filter */
+    int has_filter;      /* current object has a filter */
+    int req_filter;      /* there was a request for a filter */
     int req_obj_layout = 0; /* request layout to current object */
     unsigned crt_order_flags; /* group creation order flag */
     unsigned i;
@@ -859,7 +858,7 @@ int do_copy_objects(hid_t fidin, hid_t fidout, trav_table_t *travt,
                     /* wtype_id will have already been set if using a named dtype */
                     if (!is_named) {
                         if (options->use_native == 1)
-                            wtype_id = h5tools_get_native_type(ftype_id);
+                            wtype_id = H5Tget_native_type(ftype_id, H5T_DIR_DEFAULT);
                         else
                             wtype_id = H5Tcopy(ftype_id);
                     } /* end if */
@@ -1293,20 +1292,19 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static void print_dataset_info(hid_t dcpl_id, char *objname, double ratio,
-    int pr)
+static void print_dataset_info(hid_t dcpl_id, char *objname, double ratio, int pr)
 {
-    char strfilter[255];
+    char     strfilter[255];
 #if defined (PRINT_DEBUG )
-    char temp[255];
+    char     temp[255];
 #endif
-    int nfilters; /* number of filters */
-    unsigned filt_flags; /* filter flags */
-    H5Z_filter_t filtn; /* filter identification number */
-    unsigned cd_values[20]; /* filter client data values */
-    size_t cd_nelmts; /* filter client number of values */
-    char f_objname[256]; /* filter objname */
-    int i;
+    int      nfilters;       /* number of filters */
+    unsigned filt_flags;     /* filter flags */
+    H5Z_filter_t filtn;      /* filter identification number */
+    unsigned cd_values[20];  /* filter client data values */
+    size_t   cd_nelmts;      /* filter client number of values */
+    char     f_objname[256]; /* filter objname */
+    int     i;
 
     HDstrcpy(strfilter, "\0");
 
@@ -1405,10 +1403,9 @@ static void print_dataset_info(hid_t dcpl_id, char *objname, double ratio,
  *
  *-------------------------------------------------------------------------
  */
-static int copy_user_block(const char *infile, const char *outfile,
-    hsize_t size)
+static int copy_user_block(const char *infile, const char *outfile, hsize_t size)
 {
-    int ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
+    int ret_value = 0;           /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
     int infid = -1, outfid = -1; /* File descriptors */
 
     /* User block must be any power of 2 equal to 512 or greater (512, 1024, 2048, etc.) */
@@ -1485,67 +1482,67 @@ done:
 static
 void print_user_block(const char *filename, hid_t fid)
 {
-    int ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
-    int fh; /* file handle  */
-	hsize_t ub_size; /* user block size */
-	hsize_t size; /* size read */
-	hid_t fcpl; /* file creation property list ID for HDF5 file */
-	int i;
-
-	/* get user block size */
-	if(( fcpl = H5Fget_create_plist(fid)) < 0) {
-		error_msg("failed to retrieve file creation property list\n");
+    int     ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
+    int     fh;   /* file handle  */
+    hsize_t ub_size; /* user block size */
+    hsize_t size; /* size read */
+    hid_t   fcpl; /* file creation property list ID for HDF5 file */
+    int     i;
+
+    /* get user block size */
+    if(( fcpl = H5Fget_create_plist(fid)) < 0) {
+        error_msg("failed to retrieve file creation property list\n");
         HGOTO_ERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Fget_create_plist failed");
     }
 
-	if(H5Pget_userblock(fcpl, &ub_size) < 0) {
-		error_msg("failed to retrieve userblock size\n");
+    if(H5Pget_userblock(fcpl, &ub_size) < 0) {
+        error_msg("failed to retrieve userblock size\n");
         HGOTO_ERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Pget_userblock failed");
     }
 
-	if(H5Pclose(fcpl) < 0) {
-		error_msg("failed to close property list\n");
+    if(H5Pclose(fcpl) < 0) {
+        error_msg("failed to close property list\n");
         HGOTO_ERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Pclose failed");
     }
 
-	/* open file */
-	if((fh = HDopen(filename, O_RDONLY, 0)) < 0) {
+    /* open file */
+    if((fh = HDopen(filename, O_RDONLY, 0)) < 0) {
         HGOTO_ERROR(H5E_tools_g, H5E_tools_min_id_g, "HDopen failed");
     }
 
-	size = ub_size;
+    size = ub_size;
 
-	/* read file */
-	while(size > 0) {
-		ssize_t nread; /* # of bytes read */
-		char rbuf[USERBLOCK_XFER_SIZE]; /* buffer for reading */
+    /* read file */
+    while(size > 0) {
+        ssize_t nread; /* # of bytes read */
+        char rbuf[USERBLOCK_XFER_SIZE]; /* buffer for reading */
 
-		/* read buffer */
-		if(size > USERBLOCK_XFER_SIZE)
-			nread = HDread(fh, rbuf, (size_t)USERBLOCK_XFER_SIZE);
-		else
-			nread = HDread(fh, rbuf, (size_t)size);
+        /* read buffer */
+        if(size > USERBLOCK_XFER_SIZE)
+            nread = HDread(fh, rbuf, (size_t)USERBLOCK_XFER_SIZE);
+        else
+            nread = HDread(fh, rbuf, (size_t)size);
 
-		for(i = 0; i < nread; i++) {
+        for(i = 0; i < nread; i++) {
 
-			printf("%c ", rbuf[i]);
+            printf("%c ", rbuf[i]);
 
-		}
-		printf("\n");
+        }
+        printf("\n");
 
-		if(nread < 0) {
+        if(nread < 0) {
             HGOTO_ERROR(H5E_tools_g, H5E_tools_min_id_g, "nread < 0");
         }
 
-		/* update size of userblock left to transfer */
-		size -= nread;
-	}
+        /* update size of userblock left to transfer */
+        size -= nread;
+    }
 
 done:
-	if(fh > 0)
-		HDclose(fh);
+    if(fh > 0)
+        HDclose(fh);
 
-	return;
+    return;
 }
 #endif
 
diff --git a/tools/h5repack/h5repack_filters.c b/tools/h5repack/h5repack_filters.c
index e873a53..fc8859d 100644
--- a/tools/h5repack/h5repack_filters.c
+++ b/tools/h5repack/h5repack_filters.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include "h5repack.h"
diff --git a/tools/h5repack/h5repack_main.c b/tools/h5repack/h5repack_main.c
index 912126f..d14b604 100644
--- a/tools/h5repack/h5repack_main.c
+++ b/tools/h5repack/h5repack_main.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include "h5tools.h"
diff --git a/tools/h5repack/h5repack_opttable.c b/tools/h5repack/h5repack_opttable.c
index dd0a0e9..e24d479 100644
--- a/tools/h5repack/h5repack_opttable.c
+++ b/tools/h5repack/h5repack_opttable.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include "h5repack.h"
diff --git a/tools/h5repack/h5repack_parse.c b/tools/h5repack/h5repack_parse.c
index 6759169..a9a890d 100644
--- a/tools/h5repack/h5repack_parse.c
+++ b/tools/h5repack/h5repack_parse.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include "h5repack.h"
diff --git a/tools/h5repack/h5repack_plugin.sh.in b/tools/h5repack/h5repack_plugin.sh.in
index ce77e43..eaf6917 100644
--- a/tools/h5repack/h5repack_plugin.sh.in
+++ b/tools/h5repack/h5repack_plugin.sh.in
@@ -5,12 +5,10 @@
 #                                                                          
 # This file is part of HDF5. The full HDF5 copyright notice, including     
 # terms governing use, modification, and redistribution, is contained in   
-# the files COPYING and Copyright.html.  COPYING can be found at the root  
-# of the source code distribution tree; Copyright.html can be found at the 
-# root level of an installed copy of the electronic document set and is    
-# linked from the top-level documents page.  It can also be found at       
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have access  
-# to either file, you may request a copy from help@hdfgroup.org.           
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
 #
 srcdir=@srcdir@
 TOP_BUILDDIR=@top_builddir@
diff --git a/tools/h5repack/h5repack_refs.c b/tools/h5repack/h5repack_refs.c
index fbaeada..89d0f76 100644
--- a/tools/h5repack/h5repack_refs.c
+++ b/tools/h5repack/h5repack_refs.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include "h5repack.h"
@@ -27,7 +25,7 @@ static const char* MapIdToName(hid_t refobj_id,trav_table_t *travt);
 static int copy_refs_attr(hid_t loc_in, hid_t loc_out, pack_opt_t *options,
                           trav_table_t *travt, hid_t fidout);
 static herr_t update_ref_value(hid_t obj_id, H5R_type_t ref_type, void *ref_in,
-		hid_t fid_out, void *ref_out, trav_table_t *travt);
+        hid_t fid_out, void *ref_out, trav_table_t *travt);
 
 /*-------------------------------------------------------------------------
  * Function: do_copy_refobjs
@@ -128,8 +126,8 @@ int do_copy_refobjs(hid_t fidin,
                 for(k = 0; k < rank; k++)
                     nelmts *= dims[k];
 
-                if((mtype_id = h5tools_get_native_type(ftype_id)) < 0)
-                    HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "h5tools_get_native_type failed");
+                if((mtype_id = H5Tget_native_type(ftype_id, H5T_DIR_DEFAULT)) < 0)
+                    HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "H5Tget_native_type failed");
 
                 if((msize = H5Tget_size(mtype_id)) == 0)
                     HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "H5Tget_size failed");
@@ -427,13 +425,13 @@ done:
  * Programmer: Pedro Vicente, pvn@ncsa.uiuc.edu
  *
  * Modifier: xcao@hdfgroup.org, 9/12/2011
- * 	         Update values of references(object and region) for the following types:
+ *              Update values of references(object and region) for the following types:
  *               1) References,
  *               2) ARRAY of reference,
  *               3) VLEN of references.
  *               4) COMPOUND of references.
  *          This function does not handle references in other complicated structures,
- *		    such as references in nested compound datatypes.
+ *            such as references in nested compound datatypes.
  *
  * Date: October, 28, 2003
  *
@@ -474,7 +472,7 @@ static int copy_refs_attr(hid_t loc_in,
         HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "H5Oget_info failed");
 
     for(u = 0; u < (unsigned)oinfo.num_attrs; u++) {
-    	is_ref = is_ref_vlen = is_ref_array = is_ref_comp = 0;
+        is_ref = is_ref_vlen = is_ref_array = is_ref_comp = 0;
 
         /* open attribute */
         if((attr_id = H5Aopen_by_idx(loc_in, ".", H5_INDEX_CRT_ORDER, H5_ITER_INC, (hsize_t)u, H5P_DEFAULT, H5P_DEFAULT)) < 0)
@@ -486,8 +484,8 @@ static int copy_refs_attr(hid_t loc_in,
 
         type_class = H5Tget_class(ftype_id);
 
-        if((mtype_id = h5tools_get_native_type(ftype_id)) < 0)
-            HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "h5tools_get_native_type failed");
+        if((mtype_id = H5Tget_native_type(ftype_id, H5T_DIR_DEFAULT)) < 0)
+            HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "H5Tget_native_type failed");
 
         if((msize = H5Tget_size(mtype_id)) == 0)
             HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "H5Tget_size failed");
@@ -530,9 +528,9 @@ static int copy_refs_attr(hid_t loc_in,
                 }
                 H5Tclose(mtid);
             }
-            
-            /* if compound don't contain reference type member, free the above 
-             * mallocs. Otherwise there can be memory leaks by the 'continue' 
+
+            /* if compound don't contain reference type member, free the above
+             * mallocs. Otherwise there can be memory leaks by the 'continue'
              * statement below. */
             if (!ref_comp_field_n) {
                 if (ref_comp_index) {
@@ -541,7 +539,7 @@ static int copy_refs_attr(hid_t loc_in,
                 }
 
                 if (ref_comp_size) {
-            	    HDfree(ref_comp_size);
+                    HDfree(ref_comp_size);
                     ref_comp_size = NULL;
                 }
             }
@@ -590,7 +588,7 @@ static int copy_refs_attr(hid_t loc_in,
             array_rank = (unsigned)H5Tget_array_ndims(mtype_id);
             H5Tget_array_dims2(mtype_id, array_dims);
             for(j = 0; j <array_rank; j++)
-            	array_size *= array_dims[j];
+                array_size *= array_dims[j];
             nelmts *= array_size;
         }
 
@@ -650,7 +648,7 @@ static int copy_refs_attr(hid_t loc_in,
                 }
             } /* H5T_STD_REF_DSETREG */
             else if (is_ref_vlen) {
-            	/* handle VLEN of references */
+                /* handle VLEN of references */
 
                 buf = (hvl_t *)HDmalloc((unsigned)(nelmts * sizeof(hvl_t)));
                 refbuf = buf; /* reuse the read buffer for write */
@@ -690,7 +688,7 @@ static int copy_refs_attr(hid_t loc_in,
                 }
             } /* else if (is_ref_vlen) */
             else if (is_ref_comp) {
-            	/* handle ref fields in a compound */
+                /* handle ref fields in a compound */
 
                 buf = HDmalloc((unsigned)(nelmts * msize));
                 refbuf = buf; /* reuse the read buffer for write */
@@ -730,7 +728,7 @@ static int copy_refs_attr(hid_t loc_in,
                 HGOTO_ERROR(FAIL, H5E_tools_min_id_g, "H5Awrite failed");
 
             if (is_ref_vlen && buf)
-            	H5Dvlen_reclaim (mtype_id, space_id, H5P_DEFAULT, buf);
+                H5Dvlen_reclaim (mtype_id, space_id, H5P_DEFAULT, buf);
         } /* if (nelmts) */
 
         if (refbuf == buf)
@@ -782,10 +780,10 @@ done:
         HDfree(buf);
 
     if (ref_comp_index)
-    	HDfree(ref_comp_index);
+        HDfree(ref_comp_index);
 
     if (ref_comp_size)
-    	HDfree(ref_comp_size);
+        HDfree(ref_comp_size);
 
     H5E_BEGIN_TRY {
         H5Tclose(ftype_id);
@@ -799,9 +797,9 @@ done:
 }
 
 /*-------------------------------------------------------------------------
- * Function:	MapIdToName
+ * Function:    MapIdToName
  *
- * Purpose:	map a ID from a reference to a dataset name
+ * Purpose:    map a ID from a reference to a dataset name
  *
  *-------------------------------------------------------------------------
  */
@@ -834,16 +832,16 @@ out:
 }
 
 /*-------------------------------------------------------------------------
- * Function:	Update_Ref_value
+ * Function:    Update_Ref_value
  *
- * Purpose:	Update a reference value
+ * Purpose:    Update a reference value
  *
  * Programmer: xcao@hdfgroup.org 9/12/2011
  *
  *-------------------------------------------------------------------------
  */
 static herr_t update_ref_value(hid_t obj_id, H5R_type_t ref_type, void *ref_in,
-		hid_t fid_out, void *ref_out, trav_table_t *travt)
+        hid_t fid_out, void *ref_out, trav_table_t *travt)
 {
     int    ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
     const char* ref_obj_name;
diff --git a/tools/h5repack/h5repack_verify.c b/tools/h5repack/h5repack_verify.c
index 4993cbd..3905842 100644
--- a/tools/h5repack/h5repack_verify.c
+++ b/tools/h5repack/h5repack_verify.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include "h5repack.h"
@@ -46,7 +44,7 @@ static int verify_filters(hid_t pid, hid_t tid, int nfilters, filter_info_t *fil
 int
 h5repack_verify(const char *out_fname, pack_opt_t *options)
 {
-    int          ret_value = 0; /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
+    int          ret_value = 0;     /*no need to LEAVE() on ERROR: HERR_INIT(int, SUCCEED) */
     hid_t        fidout     = -1;   /* file ID for output file*/
     hid_t        did        = -1;   /* dataset ID */
     hid_t        pid        = -1;   /* dataset creation property list ID */
diff --git a/tools/h5repack/h5repacktst.c b/tools/h5repack/h5repacktst.c
index 32d69bb..30b879c 100644
--- a/tools/h5repack/h5repacktst.c
+++ b/tools/h5repack/h5repacktst.c
@@ -5,12 +5,10 @@
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
-* the files COPYING and Copyright.html.  COPYING can be found at the root   *
-* of the source code distribution tree; Copyright.html can be found at the  *
-* root level of an installed copy of the electronic HDF5 document set and   *
-* is linked from the top-level documents page.  It can also be found at     *
-* http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
-* access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include "h5repack.h"
@@ -97,7 +95,6 @@ const char *H5REPACK_FILENAMES[] = {
 /* Name of tool */
 #define PROGRAMNAME "h5repacktst"
 
-
 #define DIM1    40
 #define DIM2    20
 #define CDIM1   DIM1/2
diff --git a/tools/h5repack/testh5repack_detect_szip.c b/tools/h5repack/testh5repack_detect_szip.c
index e91b2f7..e08d5ab 100644
--- a/tools/h5repack/testh5repack_detect_szip.c
+++ b/tools/h5repack/testh5repack_detect_szip.c
@@ -5,12 +5,10 @@
  *                                                                           *
  * This file is part of HDF5.  The full HDF5 copyright notice, including     *
  * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * the COPYING file, which can be found at the root of the source code       *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
+ * If you do not have access to either file, you may request a copy from     *
+ * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 #include <stdio.h>