[svn-r2768] ./hdf5/tools/h5tools.h

    * 2000-10-31 Robb Matzke  <matzke@llnl.gov>
	Reindented.

1 files changed, 293 insertions, 292 deletions

diff --git a/tools/h5tools.h b/tools/h5tools.h
index ffda022..ffd7221 100644
--- a/tools/h5tools.h
+++ b/tools/h5tools.h
@@ -5,7 +5,7 @@
  * Programmer:  Robb Matzke <matzke@llnl.gov>
  *              Thursday, July 23, 1998
  *
- * Purpose:	Support functions for the various tools.
+ * Purpose:     Support functions for the various tools.
  */
 #ifndef _H5TOOLS_H
 #define _H5TOOLS_H
@@ -19,7 +19,7 @@
 #define VERSION13
 #endif
 #endif 
-#define ESCAPE_HTML	1
+#define ESCAPE_HTML     1
 
 
 /*
@@ -33,311 +33,318 @@ typedef struct h5dump_t {
      * data in hexadecimal format without translating from what appears on
      * disk.
      *
-     *	 raw:        If set then print all data as hexadecimal without
-     *		     performing any conversion from disk.
+     *   raw:        If set then print all data as hexadecimal without
+     *               performing any conversion from disk.
      *
-     *	 fmt_raw:    The printf() format for each byte of raw data. The
-     *		     default is `%02x'.
+     *   fmt_raw:    The printf() format for each byte of raw data. The
+     *               default is `%02x'.
      *
-     *	 fmt_int:    The printf() format to use when rendering data which is
-     *		     typed `int'. The default is `%d'.
+     *   fmt_int:    The printf() format to use when rendering data which is
+     *               typed `int'. The default is `%d'.
      *
-     *	 fmt_uint:   The printf() format to use when rendering data which is
-     *		     typed `unsigned'. The default is `%u'.
+     *   fmt_uint:   The printf() format to use when rendering data which is
+     *               typed `unsigned'. The default is `%u'.
      *
-     *	 fmt_schar:  The printf() format to use when rendering data which is
-     *		     typed `signed char'. The default is `%d'. This format is
-     *		     used ony if the `ascii' field is zero.
+     *   fmt_schar:  The printf() format to use when rendering data which is
+     *               typed `signed char'. The default is `%d'. This format is
+     *               used ony if the `ascii' field is zero.
      *
-     *	 fmt_uchar:  The printf() format to use when rendering data which is
-     *		     typed `unsigned char'. The default is `%u'. This format
-     *		     is used only if the `ascii' field is zero.
-     *	 
-     *	 fmt_short:  The printf() format to use when rendering data which is
-     *		     typed `short'. The default is `%d'.
+     *   fmt_uchar:  The printf() format to use when rendering data which is
+     *               typed `unsigned char'. The default is `%u'. This format
+     *               is used only if the `ascii' field is zero.
+     *   
+     *   fmt_short:  The printf() format to use when rendering data which is
+     *               typed `short'. The default is `%d'.
      *
-     *	 fmt_ushort: The printf() format to use when rendering data which is
-     *		     typed `unsigned short'. The default is `%u'.
+     *   fmt_ushort: The printf() format to use when rendering data which is
+     *               typed `unsigned short'. The default is `%u'.
      *
-     *	 fmt_long:   The printf() format to use when rendering data which is
-     *		     typed `long'. The default is `%ld'.
+     *   fmt_long:   The printf() format to use when rendering data which is
+     *               typed `long'. The default is `%ld'.
      *
-     *	 fmt_ulong:  The printf() format to use when rendering data which is
-     *		     typed `unsigned long'. The default is `%lu'.
+     *   fmt_ulong:  The printf() format to use when rendering data which is
+     *               typed `unsigned long'. The default is `%lu'.
      *
-     *	 fmt_llong:  The printf() format to use when rendering data which is
-     *		     typed `long long'. The default depends on what printf()
-     *		     format is available to print this datatype.
+     *   fmt_llong:  The printf() format to use when rendering data which is
+     *               typed `long long'. The default depends on what printf()
+     *               format is available to print this datatype.
      *
-     *	 fmt_ullong: The printf() format to use when rendering data which is
-     *		     typed `unsigned long long'. The default depends on what
-     *		     printf() format is available to print this datatype.
+     *   fmt_ullong: The printf() format to use when rendering data which is
+     *               typed `unsigned long long'. The default depends on what
+     *               printf() format is available to print this datatype.
      *
-     *	 fmt_double: The printf() format to use when rendering data which is
-     *		     typed `double'. The default is `%g'.
+     *   fmt_double: The printf() format to use when rendering data which is
+     *               typed `double'. The default is `%g'.
      * 
-     *	 fmt_float:  The printf() format to use when rendering data which is
-     *		     typed `float'. The default is `%g'.
+     *   fmt_float:  The printf() format to use when rendering data which is
+     *               typed `float'. The default is `%g'.
      *
-     *	 ascii:      If set then print 1-byte integer values as an ASCII
-     *		     character (no quotes).  If the character is one of the
-     *		     standard C escapes then print the escaped version.  If
-     *		     the character is unprintable then print a 3-digit octal
-     *		     escape.  If `ascii' is zero then then 1-byte integers are
-     *		     printed as numeric values.  The default is zero.
+     *   ascii:      If set then print 1-byte integer values as an ASCII
+     *               character (no quotes).  If the character is one of the
+     *               standard C escapes then print the escaped version.  If
+     *               the character is unprintable then print a 3-digit octal
+     *               escape.  If `ascii' is zero then then 1-byte integers are
+     *               printed as numeric values.  The default is zero.
      *
-     *	 str_locale: Determines how strings are printed. If zero then strings
-     *		     are printed like in C except. If set to ESCAPE_HTML then
-     *		     strings are printed using HTML encoding where each
-     *		     character not in the class [a-zA-Z0-9] is substituted
-     *		     with `%XX' where `X' is a hexadecimal digit.
+     *   str_locale: Determines how strings are printed. If zero then strings
+     *               are printed like in C except. If set to ESCAPE_HTML then
+     *               strings are printed using HTML encoding where each
+     *               character not in the class [a-zA-Z0-9] is substituted
+     *               with `%XX' where `X' is a hexadecimal digit.
      *
-     *	 str_repeat: If set to non-zero then any character value repeated N
-     *		     or more times is printed as 'C'*N
+     *   str_repeat: If set to non-zero then any character value repeated N
+     *               or more times is printed as 'C'*N
      *
      * Numeric data is also subject to the formats for individual elements.
      */
-    hbool_t	raw;
-    const char	*fmt_raw;
-    const char	*fmt_int;
-    const char	*fmt_uint;
-    const char	*fmt_schar;
-    const char	*fmt_uchar;
-    const char	*fmt_short;
-    const char	*fmt_ushort;
-    const char	*fmt_long;
-    const char	*fmt_ulong;
-    const char	*fmt_llong;
-    const char	*fmt_ullong;
-    const char	*fmt_double;
-    const char	*fmt_float;
-    int		ascii;
-    int		str_locale;
-    int		str_repeat;
+    hbool_t     raw;
+    const char  *fmt_raw;
+    const char  *fmt_int;
+    const char  *fmt_uint;
+    const char  *fmt_schar;
+    const char  *fmt_uchar;
+    const char  *fmt_short;
+    const char  *fmt_ushort;
+    const char  *fmt_long;
+    const char  *fmt_ulong;
+    const char  *fmt_llong;
+    const char  *fmt_ullong;
+    const char  *fmt_double;
+    const char  *fmt_float;
+    int         ascii;
+    int         str_locale;
+    int         str_repeat;
+
     /*
      * Fields associated with compound array members.
      *
-     *	 pre:	    A string to print at the beginning of each array. The
-     *		    default value is the left square bracket `['.
+     *   pre:       A string to print at the beginning of each array. The
+     *              default value is the left square bracket `['.
      *
-     *	 sep:	    A string to print between array values.  The default
-     *		    value is a ",\001" ("\001" indicates an optional line
-     *		    break).
+     *   sep:       A string to print between array values.  The default
+     *              value is a ",\001" ("\001" indicates an optional line
+     *              break).
      *
-     *	 suf:	    A string to print at the end of each array.  The default
-     *		    value is a right square bracket `]'.
+     *   suf:       A string to print at the end of each array.  The default
+     *              value is a right square bracket `]'.
      *
-	 *	 linebreaks: a boolean value to determine if we want to break the line
-	 *               after each row of an array
-	 */
-    const char	*arr_pre;
-    const char	*arr_sep;
-    const char	*arr_suf;
-	int   arr_linebreak;
+     *   linebreaks: a boolean value to determine if we want to break the line
+     *               after each row of an array.
+     */
+    const char  *arr_pre;
+    const char  *arr_sep;
+    const char  *arr_suf;
+    int         arr_linebreak;
     
     /*
      * Fields associated with compound data types.
      *
-     *	 name:      How the name of the struct member is printed in the
-     *		    values. By default the name is not printed, but a
-     *		    reasonable setting might be "%s=" which prints the name
-     *		    followed by an equal sign and then the value.
+     *   name:      How the name of the struct member is printed in the
+     *              values. By default the name is not printed, but a
+     *              reasonable setting might be "%s=" which prints the name
+     *              followed by an equal sign and then the value.
      *
-     *	 sep:	    A string that separates one member from another.  The
-     *		    default is ", \001" (the \001 indicates an optional
-     *		    line break to allow structs to span multiple lines of
-     *		    output).
+     *   sep:       A string that separates one member from another.  The
+     *              default is ", \001" (the \001 indicates an optional
+     *              line break to allow structs to span multiple lines of
+     *              output).
      *
-     *	 pre:	    A string to print at the beginning of a compound type.
-     *		    The default is a left curly brace.
+     *   pre:       A string to print at the beginning of a compound type.
+     *              The default is a left curly brace.
      *
-     *	 suf:       A string to print at the end of each compound type.  The
-     *		    default is  right curly brace.
-	 *   
-	 *	 end:       a string to print after we reach the last element of 
-	 *          each compound type. prints out before the suf.
+     *   suf:       A string to print at the end of each compound type.  The
+     *              default is  right curly brace.
+     *              
+     *   end:       a string to print after we reach the last element of 
+     *              each compound type. prints out before the suf.
      */
-    const char	*cmpd_name;
-    const char	*cmpd_sep;
-    const char	*cmpd_pre;
-    const char	*cmpd_suf;
-	const char  *cmpd_end;
+    const char  *cmpd_name;
+    const char  *cmpd_sep;
+    const char  *cmpd_pre;
+    const char  *cmpd_suf;
+    const char  *cmpd_end;
 
     /*
      * Fields associated with the individual elements.
      *
-     *	 fmt:       A printf(3c) format to use to print the value string
-     *		    after it has been rendered.  The default is "%s".
+     *   fmt:       A printf(3c) format to use to print the value string
+     *              after it has been rendered.  The default is "%s".
      *
-     *	 suf1:	    This string is appended to elements which are followed by
-     *		    another element whether the following element is on the
-     *		    same line or the next line.  The default is a comma.
+     *   suf1:      This string is appended to elements which are followed by
+     *              another element whether the following element is on the
+     *              same line or the next line.  The default is a comma.
      *
-     *	 suf2:	    This string is appended (after `suf1') to elements which
-     *		    are followed on the same line by another element.  The
-     *		    default is a single space.
+     *   suf2:      This string is appended (after `suf1') to elements which
+     *              are followed on the same line by another element.  The
+     *              default is a single space.
      */
-    const char	*elmt_fmt;
-    const char	*elmt_suf1;
-    const char	*elmt_suf2;
+    const char  *elmt_fmt;
+    const char  *elmt_suf1;
+    const char  *elmt_suf2;
     
     /*
      * Fields associated with the index values printed at the left edge of
      * each line of output.
      *
-     *	 n_fmt:	    Each index value is printed according to this printf(3c)
-     *		    format string which should include a format for a long
-     *		    integer.  The default is "%lu".
+     *   n_fmt:     Each index value is printed according to this printf(3c)
+     *              format string which should include a format for a long
+     *              integer.  The default is "%lu".
      *
-     *	 sep:	    Each integer in the index list will be separated from the
-     *		    others by this string, which defaults to a comma.
+     *   sep:       Each integer in the index list will be separated from the
+     *              others by this string, which defaults to a comma.
      *
-     *	 fmt:	    After the index values are formated individually and
-     *		    separated from one another by some string, the entire
-     *		    resulting string will be formated according to this
-     *		    printf(3c) format which should include a format for a
-     *		    character string.  The default is "%s".
+     *   fmt:       After the index values are formated individually and
+     *              separated from one another by some string, the entire
+     *              resulting string will be formated according to this
+     *              printf(3c) format which should include a format for a
+     *              character string.  The default is "%s".
      */
-    const char	*idx_n_fmt;		/*index number format		*/
-    const char	*idx_sep;		/*separator between numbers	*/
-    const char	*idx_fmt;		/*entire index format		*/
+    const char  *idx_n_fmt;             /*index number format           */
+    const char  *idx_sep;               /*separator between numbers     */
+    const char  *idx_fmt;               /*entire index format           */
     
     /*
      * Fields associated with entire lines.
      *
-     *	 ncols:	    Number of columns per line defaults to 80.
-     *
-     *	 per_line:  If this field has a positive value then every Nth element
-     *	 	    will be printed at the beginning of a line.
-     *
-     *	 pre:       Each line of output contains an optional prefix area
-     *		    before the data. This area can contain the index for the
-     *		    first datum (represented by `%s') as well as other
-     *		    constant text.  The default value is `%s'.
-     *
-     *	 1st:	    This is the format to print at the beginning of the first
-     *		    line of output. The default value is the current value of
-     *		    `pre' described above.
-     *
-     *	 cont:	    This is the format to print at the beginning of each line
-     *		    which was continued because the line was split onto
-     *		    multiple lines. This often happens with compound
-     *		    data which is longer than one line of output. The default
-     *		    value is the current value of the `pre' field
-     *		    described above.
-     *
-     *	 suf:	    This character string will be appended to each line of
-     *		    output.  It should not contain line feeds.  The default
-     *		    is the empty string.
-     *	 
-     *	 sep:	    A character string to be printed after every line feed
-     *		    defaulting to the empty string.  It should end with a
-     *		    line feed.
-     *
-     *	 multi_new: Indicates the algorithm to use when data elements tend to
-     *		    occupy more than one line of output. The possible values
-     *		    are (zero is the default):
-     *
-     *		    0:  No consideration. Each new element is printed
-     *			beginning where the previous element ended.
-     *
-     *		    1:  Print the current element beginning where the
-     *			previous element left off. But if that would result
-     *			in the element occupying more than one line and it
-     *			would only occupy one line if it started at the
-     *			beginning of a line, then it is printed at the
-     *			beginning of the next line.
-     *
-     *	 multi_new: If an element is continued onto additional lines then
-     *		    should the following element begin on the next line? The
-     *		    default is to start the next element on the same line
-     *		    unless it wouldn't fit.
-	 *
-	 *   indentlevel: a string that shows how far to indent if extra spacing
-	 *          is needed. dumper uses it.
+     *   ncols:     Number of columns per line defaults to 80.
+     *
+     *   per_line:  If this field has a positive value then every Nth element
+     *              will be printed at the beginning of a line.
+     *
+     *   pre:       Each line of output contains an optional prefix area
+     *              before the data. This area can contain the index for the
+     *              first datum (represented by `%s') as well as other
+     *              constant text.  The default value is `%s'.
+     *
+     *   1st:       This is the format to print at the beginning of the first
+     *              line of output. The default value is the current value of
+     *              `pre' described above.
+     *
+     *   cont:      This is the format to print at the beginning of each line
+     *              which was continued because the line was split onto
+     *              multiple lines. This often happens with compound
+     *              data which is longer than one line of output. The default
+     *              value is the current value of the `pre' field
+     *              described above.
+     *
+     *   suf:       This character string will be appended to each line of
+     *              output.  It should not contain line feeds.  The default
+     *              is the empty string.
+     *   
+     *   sep:       A character string to be printed after every line feed
+     *              defaulting to the empty string.  It should end with a
+     *              line feed.
+     *
+     *   multi_new: Indicates the algorithm to use when data elements tend to
+     *              occupy more than one line of output. The possible values
+     *              are (zero is the default):
+     *
+     *              0:  No consideration. Each new element is printed
+     *                  beginning where the previous element ended.
+     *
+     *              1:  Print the current element beginning where the
+     *                  previous element left off. But if that would result
+     *                  in the element occupying more than one line and it
+     *                  would only occupy one line if it started at the
+     *                  beginning of a line, then it is printed at the
+     *                  beginning of the next line.
+     *
+     *   multi_new: If an element is continued onto additional lines then
+     *              should the following element begin on the next line? The
+     *              default is to start the next element on the same line
+     *              unless it wouldn't fit.
+     *              
+     * indentlevel: a string that shows how far to indent if extra spacing
+     *              is needed. dumper uses it.
      */
-    int		line_ncols;		/*columns of output		*/
-    size_t	line_per_line;		/*max elements per line		*/
-    const char	*line_pre;		/*prefix at front of each line	*/
-    const char	*line_1st;		/*alternate pre. on first line	*/
-    const char	*line_cont;		/*alternate pre. on continuation*/
-    const char	*line_suf;		/*string to append to each line	*/
-    const char	*line_sep;		/*separates lines		*/
-    int		line_multi_new;		/*split multi-line outputs?	*/
-	const char *line_indent;    /*for extra identation if we need it*/
+    int         line_ncols;             /*columns of output             */
+    size_t      line_per_line;          /*max elements per line         */
+    const char  *line_pre;              /*prefix at front of each line  */
+    const char  *line_1st;              /*alternate pre. on first line  */
+    const char  *line_cont;             /*alternate pre. on continuation*/
+    const char  *line_suf;              /*string to append to each line */
+    const char  *line_sep;              /*separates lines               */
+    int         line_multi_new;         /*split multi-line outputs?     */
+    const char  *line_indent;           /*for extra identation if we need it*/
 
-	int skip_first;				/*used to skip the first set of checks for line length*/
+    /*used to skip the first set of checks for line length*/
+    int skip_first;
 
-	int obj_hidefileno; /*flag used to hide or show the file number for obj refs*/
-	const char *obj_format; /*string used to format the output for the obje refs*/
+    /*flag used to hide or show the file number for obj refs*/
+    int obj_hidefileno;
 
-	int dset_hidefileno;/*flag used to hide or show the file number for dataset regions*/
-	const char *dset_format; /*string used to format the output for the dataset regions*/
+    /*string used to format the output for the obje refs*/
+    const char *obj_format;
 
-	const char *dset_blockformat_pre;
-	const char *dset_ptformat_pre;
-	const char *dset_ptformat;
+    /*flag used to hide or show the file number for dataset regions*/
+    int dset_hidefileno;
 
+    /*string used to format the output for the dataset regions*/
+    const char *dset_format;
 
+    const char *dset_blockformat_pre;
+    const char *dset_ptformat_pre;
+    const char *dset_ptformat;
 
 } h5dump_t;
 
 
 typedef struct dump_header{
-	const char *name;
-	const char *filebegin;
-	const char *fileend;
-	const char *bootblockbegin;
-	const char *bootblockend;
-	const char *groupbegin;
-	const char *groupend;
-	const char *datasetbegin;
-	const char *datasetend;
-	const char *attributebegin;
-	const char *attributeend;
-	const char *datatypebegin;
-	const char *datatypeend;
-	const char *dataspacebegin;
-	const char *dataspaceend;
-	const char *databegin;
-	const char *dataend;
-	const char *softlinkbegin;
-	const char *softlinkend;
-
-	const char *fileblockbegin;
-	const char *fileblockend;
-	const char *bootblockblockbegin;
-	const char *bootblockblockend;
-	const char *groupblockbegin;
-	const char *groupblockend;
-	const char *datasetblockbegin;
-	const char *datasetblockend;
-	const char *attributeblockbegin;
-	const char *attributeblockend;
-	const char *datatypeblockbegin;
-	const char *datatypeblockend;
-	const char *dataspaceblockbegin;
-	const char *dataspaceblockend;
-	const char *datablockbegin;
-	const char *datablockend;
-	const char *softlinkblockbegin;
-	const char *softlinkblockend;
-	const char *strblockbegin;
-	const char *strblockend;
-	const char *enumblockbegin;
-	const char *enumblockend;
-
-	const char *dataspacedescriptionbegin;
-	const char *dataspacedescriptionend;
-	const char *dataspacedimbegin;
-	const char *dataspacedimend;
+    const char *name;
+    const char *filebegin;
+    const char *fileend;
+    const char *bootblockbegin;
+    const char *bootblockend;
+    const char *groupbegin;
+    const char *groupend;
+    const char *datasetbegin;
+    const char *datasetend;
+    const char *attributebegin;
+    const char *attributeend;
+    const char *datatypebegin;
+    const char *datatypeend;
+    const char *dataspacebegin;
+    const char *dataspaceend;
+    const char *databegin;
+    const char *dataend;
+    const char *softlinkbegin;
+    const char *softlinkend;
+
+    const char *fileblockbegin;
+    const char *fileblockend;
+    const char *bootblockblockbegin;
+    const char *bootblockblockend;
+    const char *groupblockbegin;
+    const char *groupblockend;
+    const char *datasetblockbegin;
+    const char *datasetblockend;
+    const char *attributeblockbegin;
+    const char *attributeblockend;
+    const char *datatypeblockbegin;
+    const char *datatypeblockend;
+    const char *dataspaceblockbegin;
+    const char *dataspaceblockend;
+    const char *datablockbegin;
+    const char *datablockend;
+    const char *softlinkblockbegin;
+    const char *softlinkblockend;
+    const char *strblockbegin;
+    const char *strblockend;
+    const char *enumblockbegin;
+    const char *enumblockend;
+
+    const char *dataspacedescriptionbegin;
+    const char *dataspacedescriptionend;
+    const char *dataspacedimbegin;
+    const char *dataspacedimend;
 
 } dump_header;
 
 hid_t h5dump_fixtype(hid_t f_type);
-int h5dump_dset(FILE *stream, const h5dump_t *info, hid_t dset, hid_t p_typ,int indentlevel);
+int h5dump_dset(FILE *stream, const h5dump_t *info, hid_t dset, hid_t p_typ,
+                int indentlevel);
 int h5dump_mem(FILE *stream, const h5dump_t *info, hid_t type, hid_t space,
-	       void *mem, int indentlevel);
+               void *mem, int indentlevel);
 hid_t h5dump_fopen(const char *fname, char *drivername, size_t drivername_len);
 
 
@@ -351,34 +358,33 @@ typedef enum {
 
 
 /*struct taken from the dumper. needed in table struct*/
-typedef struct obj_t{
-unsigned long objno[2];
-char objname[1024];
-int displayed;
-int recorded;
-int objflag;
+typedef struct obj_t {
+    unsigned long objno[2];
+    char objname[1024];
+    int displayed;
+    int recorded;
+    int objflag;
 } obj_t;
 
 
 /*struct for the tables that the find_objs function uses*/
-
-typedef struct table_t{
-int size;
-int nobjs;
-obj_t *objs;
+typedef struct table_t {
+    int size;
+    int nobjs;
+    obj_t *objs;
 } table_t;
 
 
 
 /*this struct stores the information that is passed to the find_objs function*/
 typedef struct find_objs_t {
-	int prefix_len; 
-	char *prefix;
-	unsigned int threshold; /* should be 0 or 1 */
-	table_t *group_table;
-	table_t *type_table;
-	table_t *dset_table;
-	int status;
+    int prefix_len; 
+    char *prefix;
+    unsigned int threshold; /* should be 0 or 1 */
+    table_t *group_table;
+    table_t *type_table;
+    table_t *dset_table;
+    int status;
 } find_objs_t;
 
 herr_t find_objs(hid_t group, const char *name, void *op_data);
@@ -386,53 +392,48 @@ int search_obj (table_t *temp, unsigned long *);
 void init_table(table_t **temp);
 void init_prefix(char **temp, int);
 
-/*
-	taken from h5dump.h
-  */
-
+/* taken from h5dump.h */
 #define ATTRIBUTE_DATA 0
-#define DATASET_DATA	1
+#define DATASET_DATA    1
 #define ENUM_DATA 2
 
-
 #define COL 3
 extern int indent;
 extern void indentation(int);
 extern int nCols;
-extern FILE *rawdatastream;		/* output stream for raw data */
+extern FILE *rawdatastream;             /* output stream for raw data */
 
 
 /* taken from h5dump.h*/
-#define BOOT_BLOCK	"BOOT_BLOCK"
-#define GROUPNAME	"GROUP"
-#define DATASET		"DATASET"
-#define ATTRIBUTE	"ATTRIBUTE"
-#define	DATATYPE	"DATATYPE"
-#define DATASPACE	"DATASPACE"
-#define DATA		"DATA"
-#define SCALAR		"SCALAR"
-#define SIMPLE		"SIMPLE"
-#define COMPLEX		"COMPLEX"
-#define STORAGELAYOUT	"STORAGELAYOUT"
-#define COMPRESSION	"COMPRESSION"
-#define EXTERNAL	"EXTERNAL"
-#define SOFTLINK	"SOFTLINK"
-#define HARDLINK	"HARDLINK"
-#define NLINK		"NLINK"
-#define FILENO		"FILENO"
-#define OBJNO		"OBJNO"
-#define STRSIZE		"STRSIZE"
-#define STRPAD		"STRPAD"
-#define CSET		"CSET"
-#define CTYPE		"CTYPE"
-#define CONCATENATOR "//"
-#define DATASET "DATASET"
-#define OBJID "OBJECTID"
-#define BEGIN		"{"
-#define END		"}"
+#define BOOT_BLOCK      "BOOT_BLOCK"
+#define GROUPNAME       "GROUP"
+#define DATASET         "DATASET"
+#define ATTRIBUTE       "ATTRIBUTE"
+#define DATATYPE        "DATATYPE"
+#define DATASPACE       "DATASPACE"
+#define DATA            "DATA"
+#define SCALAR          "SCALAR"
+#define SIMPLE          "SIMPLE"
+#define COMPLEX         "COMPLEX"
+#define STORAGELAYOUT   "STORAGELAYOUT"
+#define COMPRESSION     "COMPRESSION"
+#define EXTERNAL        "EXTERNAL"
+#define SOFTLINK        "SOFTLINK"
+#define HARDLINK        "HARDLINK"
+#define NLINK           "NLINK"
+#define FILENO          "FILENO"
+#define OBJNO           "OBJNO"
+#define STRSIZE         "STRSIZE"
+#define STRPAD          "STRPAD"
+#define CSET            "CSET"
+#define CTYPE           "CTYPE"
+#define CONCATENATOR    "//"
+#define DATASET         "DATASET"
+#define OBJID           "OBJECTID"
+#define BEGIN           "{"
+#define END             "}"
 #endif
 
-
 /* Definitions of useful routines */
 void print_version(const char *program_name);