summaryrefslogtreecommitdiffstats
path: root/tools/misc/h5cc.in
diff options
context:
space:
mode:
authorAllen Byrne <byrn@hdfgroup.org>2016-10-27 15:04:42 (GMT)
committerAllen Byrne <byrn@hdfgroup.org>2016-10-27 15:04:42 (GMT)
commit5b562d9ce9b2945d0378b9c03e01f42923da80f4 (patch)
tree3fa67d9656f2b32330e3fe31996952f60f71cdb9 /tools/misc/h5cc.in
parentb34423f620b470e1c5dc38cdd3abbd5fe8adc4ec (diff)
downloadhdf5-5b562d9ce9b2945d0378b9c03e01f42923da80f4.zip
hdf5-5b562d9ce9b2945d0378b9c03e01f42923da80f4.tar.gz
hdf5-5b562d9ce9b2945d0378b9c03e01f42923da80f4.tar.bz2
Split tools into src and test - remove folders
Diffstat (limited to 'tools/misc/h5cc.in')
-rw-r--r--tools/misc/h5cc.in401
1 files changed, 0 insertions, 401 deletions
diff --git a/tools/misc/h5cc.in b/tools/misc/h5cc.in
deleted file mode 100644
index 1645855..0000000
--- a/tools/misc/h5cc.in
+++ /dev/null
@@ -1,401 +0,0 @@
-#! /bin/sh
-##
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-##
-
-# This tool is adapted from the mpicc command of the MPICH Software.
-
-############################################################################
-## ##
-## Things You May Have to Modify: ##
-## ##
-## If the following paths don't point to the place were HDF5 is installed ##
-## on your system (i.e., you received a binary distribution or moved the ##
-## files from the originally installed directory to another directory) ##
-## then modify them accordingly to represent the new paths. ##
-## ##
-############################################################################
-prefix="@prefix@"
-exec_prefix="@exec_prefix@"
-libdir="@libdir@"
-includedir="@includedir@"
-HL="@HL@"
-
-############################################################################
-## ##
-## Things You Can Modify to Override HDF5 Library Build Components: ##
-## ##
-## (Advanced usage - know what you're doing - you're on your own here.) ##
-## The four variables below can be used to insert paths and flags in ##
-## CPPFLAGS, CFLAGS, LDFLAGS, or LIBS in the h5cc compile line: ##
-## $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS ##
-## $LIBS $clibpath $link_objs $link_args $shared_link ##
-## ##
-## These settings can be overriden by setting HDF5_CFLAGS, ##
-## HDF5_CPPFLAGS, HDF5_LDFLAGS, or HDF5_LIBS in the environment. ##
-## ##
-############################################################################
-CFLAGSBASE=""
-CPPFLAGSBASE=""
-LDFLAGSBASE=""
-LIBSBASE=""
-
-############################################################################
-## ##
-## You shouldn't have to modify anything below this line. ##
-## ##
-############################################################################
-
-# Constants definitions
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-host_os="@host_os@"
-
-prog_name="`basename $0`"
-
-allargs=""
-compile_args=""
-libraries=""
-link_args=""
-link_objs=""
-clibpath=""
-
-do_link="yes"
-do_compile="no"
-dash_o="no"
-dash_c="no"
-get_output_file="no"
-
-SHOW="eval"
-CCBASE="@CC@"
-CLINKERBASE="@CC@"
-
-# CFLAGS, CPPFLAGS and LDFLAGS are reserved for use by the script user.
-# FLAGS brought from the hdf5 build are put in H5BLD_*FLAGS.
-
-# User's CPPFLAGS and CFLAGS come after their H5BLD counterparts. User's
-# LDFLAGS come just before clibpath, user's LIBS come after $link_objs and
-# before the hdf5 libraries in $link_args, followed by any external library
-# paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in
-# from the hdf5 build. The order of the flags is intended to give precedence
-# to the user's flags.
-H5BLD_CFLAGS="@AM_CFLAGS@ @CFLAGS@"
-H5BLD_CPPFLAGS="@AM_CPPFLAGS@ @CPPFLAGS@"
-H5BLD_LDFLAGS="@AM_LDFLAGS@ @LDFLAGS@"
-H5BLD_LIBS="@LIBS@"
-
-CC="${HDF5_CC:-$CCBASE}"
-CLINKER="${HDF5_CLINKER:-$CLINKERBASE}"
-CFLAGS="${HDF5_CFLAGS:-$CFLAGSBASE}"
-CPPFLAGS="${HDF5_CPPFLAGS:-$CPPFLAGSBASE}"
-LDFLAGS="${HDF5_LDFLAGS:-$LDFLAGSBASE}"
-LIBS="${HDF5_LIBS:-$LIBSBASE}"
-
-# If a static library is available, the default will be to use it. If the only
-# available library is shared, it will be used by default. The user can
-# override either default, although choosing an unavailable library will result
-# in link errors.
-STATIC_AVAILABLE="@enable_static@"
-if test "${STATIC_AVAILABLE}" = "yes"; then
- USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
-else
- USE_SHARED_LIB="${HDF5_USE_SHLIB:-yes}"
-fi
-
-
-usage() {
- # A wonderfully informative "usage" message.
- echo "usage: $prog_name [OPTIONS] <compile line>"
- echo " OPTIONS:"
- echo " -help This help message."
- echo " -echo Show all the shell commands executed"
- echo " -prefix=DIR Prefix directory to find HDF5 lib/ and include/"
- echo " subdirectories [default: $prefix]"
- # A wonderfully informative "usage" message.
- echo "usage: $prog_name [OPTIONS] <compile line>"
- echo " OPTIONS:"
- echo " -help This help message."
- echo " -echo Show all the shell commands executed"
- echo " -prefix=DIR Prefix directory to find HDF5 lib/ and include/"
- echo " subdirectories [default: $prefix]"
- echo " -show Show the commands without executing them"
- echo " -showconfig Show the HDF5 library configuration summary"
- echo " -shlib Compile with shared HDF5 libraries [default for hdf5 built"
- echo " without static libraries]"
- echo " -noshlib Compile with static HDF5 libraries [default for hdf5 built"
- echo " with static libraries]"
- echo " "
- echo " <compile line> - the normal compile line options for your compiler."
- echo " $prog_name uses the same compiler you used to compile"
- echo " HDF5. Check with your compiler's man pages for more"
- echo " information on which options are needed."
- echo " "
- echo " You can override the compiler, linker, and whether or not to use static"
- echo " or shared libraries to compile your program by setting the following"
- echo " environment variables accordingly:"
- echo " "
- echo " HDF5_CC - use a different C compiler"
- echo " HDF5_CLINKER - use a different linker"
- echo " HDF5_USE_SHLIB=[yes|no] - use shared or static version of the HDF5 library"
- echo " [default: no except when built with only"
- echo " shared libraries]"
- echo " "
- echo " You can also add or change paths and flags to the compile line using"
- echo " the following environment varibles or by assigning them to their counterparts"
- echo " in the 'Things You Can Modify to Override...'" section of $prog_name
- echo " "
- echo " Variable Current value to be replaced"
- echo " HDF5_CPPFLAGS \"$CPPFLAGSBASE\""
- echo " HDF5_CFLAGS \"$CFLAGSBASE\""
- echo " HDF5_LDFLAGS \"$LDFLAGSBASE\""
- echo " HDF5_LIBS \"$LIBSBASE\""
- echo " "
- echo " Note that adding library paths to HDF5_LDFLAGS where another hdf5 version"
- echo " is located may link your program with that other hdf5 library version."
- echo " "
- exit $EXIT_FAILURE
-}
-
-# Show the configuration summary of the library recorded in the
-# libhdf5.settings file reside in the lib directory.
-showconfigure()
-{
- cat ${libdir}/libhdf5.settings
- status=$?
-}
-
-# Main
-status=$EXIT_SUCCESS
-
-if test "$#" = "0"; then
- # No parameters specified, issue usage statement and exit.
- usage
-fi
-
-case "$CC" in
- gcc)
- kind="gcc"
- ;;
- mpicc|mpcc|mpicc_r)
- # Is this gcc masquarading as an MPI compiler?
- if test "`${CC} -v 2>&1 | sed -n 2p | cut -c1-3`" = "gcc"; then
- kind="gcc"
- else
- # Nope
- kind="$host_os"
- fi
- ;;
- *)
- kind="$host_os"
- ;;
-esac
-
-for arg in $@ ; do
- if test "x$get_output_file" = "xyes"; then
- link_args="$link_args $arg"
- output_file="$arg"
- get_output_file="no"
- continue
- fi
-
- case "$arg" in
- -c)
- allargs="$allargs $arg"
- compile_args="$compile_args $arg"
-
- if test "x$do_link" = "xyes" -a -n "$output_file"; then
- compile_args="$compile_args -o $output_file"
- fi
-
- do_link="no"
- dash_c="yes"
- ;;
- -o)
- allargs="$allargs $arg"
- dash_o="yes"
-
- if test "x$dash_c" = "xyes"; then
- compile_args="$compile_args $arg"
- else
- link_args="$link_args $arg"
- do_link="yes"
- get_output_file="yes"
- fi
- ;;
- -E|-M|-MT)
- allargs="$allargs $arg"
- compile_args="$compile_args $arg"
- dash_c="yes"
- do_link="no"
- ;;
- -l*)
- libraries=" $libraries $arg "
- allargs="$allargs $arg"
- ;;
- -prefix=*)
- prefix="`expr "$arg" : '-prefix=\(.*\)'`"
- ;;
- -echo)
- set -x
- ;;
- -show)
- SHOW="echo"
- ;;
- -showconfig)
- showconfigure
- exit $status
- ;;
- -shlib)
- USE_SHARED_LIB="yes"
- ;;
- -noshlib)
- USE_SHARED_LIB="no"
- ;;
- -help)
- usage
- ;;
- *\"*)
- qarg="'"$arg"'"
- allargs="$allargs $qarg"
- ;;
- *\'*)
- qarg='\"'"$arg"'\"'
- allargs="$allargs $qarg"
- ;;
- *)
- allargs="$allargs $qarg"
-
- if test -s "$arg"; then
- ext=`expr "$arg" : '.*\(\..*\)'`
-
- if test "x$ext" = "x.c"; then
- do_compile="yes"
- compile_args="$compile_args $arg"
- fname=`basename $arg .c`
- link_objs="$link_objs $fname.o"
- elif test "x$ext" = "x.o"; then
- if test "x$dash_c" = "xyes"; then
- compile_args="$compile_args $arg"
- else
- do_link="yes"
- link_objs="$link_objs $arg"
- fi
- elif test "x$ext" = "x.a"; then
- # This is an archive that we're linking in
- libraries=" $libraries $arg "
- else
- compile_args="$compile_args $arg"
- link_args="$link_args $arg"
- fi
- else
- compile_args="$compile_args $arg"
- link_args="$link_args $arg"
- fi
- ;;
- esac
-done
-
-if test "$dash_c" = "yes" -a "$do_compile" = no -a "$do_link" = no ; then
- # -c was specified. Force do_compile on.
- do_compile=yes
-fi
-
-if test "x$do_compile" = "xyes"; then
- if test "x$dash_c" != "xyes"; then
- compile_args="-c $compile_args"
- fi
-
- $SHOW $CC -I$includedir $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $compile_args
- status=$?
-
- if test "$status" != "0"; then
- exit $status
- fi
-fi
-
-if test "x$do_link" = "xyes"; then
- shared_link=""
-# conditionnaly link with the hl library
- if test "X$HL" = "Xhl"; then
- libraries=" $libraries -lhdf5_hl -lhdf5 "
- else
- libraries=" $libraries -lhdf5 "
- fi
- link_args="$link_args -L${libdir}"
-
- case "$kind" in
- gcc|linux*)
- # MacOS X doesn't support the "-Wl,-rpath -Wl," style of linker flags.
- # It appears to want none of them specified.
- case "$host_os" in
- darwin*) flag="" ;;
- *) flag="-Wl,-rpath -Wl," ;;
- esac
- ;;
- hpux*) flag="-Wl,+b -Wl," ;;
- freebsd*|solaris*) flag="-R" ;;
- rs6000*|aix*) flag="-L" ;;
- sgi) flag="-rpath " ;;
- *) flag="" ;;
- esac
-
- if test -n "$flag"; then
- shared_link="${flag}${libdir}"
- fi
-
- if test "x$USE_SHARED_LIB" != "xyes"; then
- # The "-lhdf5" & "-lhdf5_hl" flags are in here already...This is a static
- # compile though, so change it to the static version (.a) of the library.
- new_libraries=""
- for lib in $libraries; do
- case "$lib" in
- -lhdf5)
- new_libraries="$new_libraries ${libdir}/libhdf5.a"
- ;;
- -lhdf5_hl)
- new_libraries="$new_libraries ${libdir}/libhdf5_hl.a"
- ;;
- *)
- new_libraries="$new_libraries $lib"
- ;;
- esac
- done
- libraries="$new_libraries"
- fi
-
- for lib in $libraries; do
- if echo $link_args | grep " $lib " > /dev/null ||
- echo $link_args | grep " $lib$" > /dev/null; then
- :
- else
- link_args="$link_args $lib "
- fi
- done
-
- # The LIBS are just a bunch of -l* libraries necessary for the HDF5
- # module. It's okay if they're included twice in the compile line.
- link_args="$link_args $H5BLD_LDFLAGS $H5BLD_LIBS"
-
- # User's CPPFLAGS and CFLAGS come after their H5BLD counterparts. User's
- # LDFLAGS come just before clibpath, user's LIBS come after $link_objs and
- # before the hdf5 libraries in $link_args, followed by any external library
- # paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in
- # from the hdf5 build. The order of the flags is intended to give precedence
- # to the user's flags.
- $SHOW $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args $shared_link
- status=$?
-fi
-
-exit $status