Modified Makefile.ams for h5repack, h5watch and gif2h5 to allow

disabling tests.
Moved h5cc.in from tools/src/misc to src directory to always create h5cc
whether or not tools are enabled.
Added configuration status of tools and tests to libhdf5.settings.

1 files changed, 0 insertions, 399 deletions

diff --git a/tools/src/misc/h5cc.in b/tools/src/misc/h5cc.in
deleted file mode 100644
index 9c4e3ca..0000000
--- a/tools/src/misc/h5cc.in
+++ /dev/null
@@ -1,399 +0,0 @@
-#! /bin/sh
-##
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the COPYING file, which can be found at the root of the source code
-# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
-# If you do not have access to either file, you may request a copy from
-# help@hdfgroup.org.
-##
-
-# This tool is adapted from the mpicc command of the MPICH Software.
-
-############################################################################
-##                                                                        ##
-## Things You May Have to Modify:                                         ##
-##                                                                        ##
-## If the following paths don't point to the place were HDF5 is installed ##
-## on your system (i.e., you received a binary distribution or moved the  ##
-## files from the originally installed directory to another directory)    ##
-## then modify them accordingly to represent the new paths.               ##
-##                                                                        ##
-############################################################################
-prefix="@prefix@"
-exec_prefix="@exec_prefix@"
-libdir="@libdir@"
-includedir="@includedir@"
-HL="@HL@"
-
-############################################################################
-##                                                                        ##
-## Things You Can Modify to Override HDF5 Library Build Components:       ##
-##                                                                        ##
-## (Advanced usage - know what you're doing - you're on your own here.)   ##
-## The four variables below can be used to insert paths and flags in      ##
-## CPPFLAGS, CFLAGS, LDFLAGS, or LIBS in the h5cc compile line:           ##
-##    $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS   ##
-##    $LIBS $clibpath $link_objs $link_args $shared_link                  ##
-##                                                                        ##
-## These settings can be overriden by setting HDF5_CFLAGS,                ##
-## HDF5_CPPFLAGS, HDF5_LDFLAGS, or HDF5_LIBS in the environment.          ##
-##                                                                        ##
-############################################################################
-CFLAGSBASE=""
-CPPFLAGSBASE=""
-LDFLAGSBASE=""
-LIBSBASE=""
-
-############################################################################
-##                                                                        ##
-## You shouldn't have to modify anything below this line.                 ##
-##                                                                        ##
-############################################################################
-
-# Constants definitions
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-host_os="@host_os@"
-
-prog_name="`basename $0`"
-
-allargs=""
-compile_args=""
-libraries=""
-link_args=""
-link_objs=""
-clibpath=""
-
-do_link="yes"
-do_compile="no"
-dash_o="no"
-dash_c="no"
-get_output_file="no"
-
-SHOW="eval"
-CCBASE="@CC@"
-CLINKERBASE="@CC@"
-
-# CFLAGS, CPPFLAGS and LDFLAGS are reserved for use by the script user.
-# FLAGS brought from the hdf5 build are put in H5BLD_*FLAGS.
-
-# User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's 
-# LDFLAGS come just before clibpath, user's LIBS come after $link_objs and 
-# before the hdf5 libraries in $link_args, followed by any external library 
-# paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in 
-# from the hdf5 build. The order of the flags is intended to give precedence
-# to the user's flags.
-H5BLD_CFLAGS="@AM_CFLAGS@ @CFLAGS@"
-H5BLD_CPPFLAGS="@AM_CPPFLAGS@ @CPPFLAGS@"
-H5BLD_LDFLAGS="@AM_LDFLAGS@ @LDFLAGS@"
-H5BLD_LIBS="@LIBS@"
-
-CC="${HDF5_CC:-$CCBASE}"
-CLINKER="${HDF5_CLINKER:-$CLINKERBASE}"
-CFLAGS="${HDF5_CFLAGS:-$CFLAGSBASE}"
-CPPFLAGS="${HDF5_CPPFLAGS:-$CPPFLAGSBASE}"
-LDFLAGS="${HDF5_LDFLAGS:-$LDFLAGSBASE}"
-LIBS="${HDF5_LIBS:-$LIBSBASE}"
-
-# If a static library is available, the default will be to use it.  If the only
-# available library is shared, it will be used by default.  The user can 
-# override either default, although choosing an unavailable library will result
-# in link errors.  
-STATIC_AVAILABLE="@enable_static@"
-if test "${STATIC_AVAILABLE}" = "yes"; then
-  USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
-else
-  USE_SHARED_LIB="${HDF5_USE_SHLIB:-yes}"
-fi
-
-
-usage() {
-  # A wonderfully informative "usage" message.
-  echo "usage: $prog_name [OPTIONS] <compile line>"
-  echo "  OPTIONS:"
-  echo "    -help        This help message."
-  echo "    -echo        Show all the shell commands executed"
-  echo "    -prefix=DIR  Prefix directory to find HDF5 lib/ and include/"
-  echo "                   subdirectories [default: $prefix]"
-  # A wonderfully informative "usage" message.
-  echo "usage: $prog_name [OPTIONS] <compile line>"
-  echo "  OPTIONS:"
-  echo "    -help        This help message."
-  echo "    -echo        Show all the shell commands executed"
-  echo "    -prefix=DIR  Prefix directory to find HDF5 lib/ and include/"
-  echo "                   subdirectories [default: $prefix]"
-  echo "    -show        Show the commands without executing them"
-  echo "    -showconfig  Show the HDF5 library configuration summary"
-  echo "    -shlib       Compile with shared HDF5 libraries [default for hdf5 built"
-  echo "                                                     without static libraries]"
-  echo "    -noshlib     Compile with static HDF5 libraries [default for hdf5 built"
-  echo "                                                     with static libraries]"
-  echo " "
-  echo "  <compile line>  - the normal compile line options for your compiler."
-  echo "                    $prog_name uses the same compiler you used to compile"
-  echo "                    HDF5. Check with your compiler's man pages for more"
-  echo "                    information on which options are needed."
-  echo " "
-  echo " You can override the compiler, linker, and whether or not to use static"
-  echo " or shared libraries to compile your program by setting the following"
-  echo " environment variables accordingly:"
-  echo " "
-  echo "   HDF5_CC                  -  use a different C compiler"
-  echo "   HDF5_CLINKER             -  use a different linker"
-  echo "   HDF5_USE_SHLIB=[yes|no]  -  use shared or static version of the HDF5 library"
-  echo "                                 [default: no except when built with only" 
-  echo "                                           shared libraries]"
-  echo " "
-  echo " You can also add or change paths and flags to the compile line using"
-  echo " the following environment varibles or by assigning them to their counterparts"
-  echo " in the 'Things You Can Modify to Override...'" section of $prog_name
-  echo " "
-  echo "  Variable              Current value to be replaced"
-  echo "  HDF5_CPPFLAGS         \"$CPPFLAGSBASE\""
-  echo "  HDF5_CFLAGS           \"$CFLAGSBASE\""
-  echo "  HDF5_LDFLAGS          \"$LDFLAGSBASE\""
-  echo "  HDF5_LIBS             \"$LIBSBASE\""
-  echo " "
-  echo " Note that adding library paths to HDF5_LDFLAGS where another hdf5 version"
-  echo " is located may link your program with that other hdf5 library version."
-  echo " "
-  exit $EXIT_FAILURE
-}
-
-# Show the configuration summary of the library recorded in the
-# libhdf5.settings file reside in the lib directory.
-showconfigure()
-{
-  cat ${libdir}/libhdf5.settings
-  status=$?
-}
-
-# Main
-status=$EXIT_SUCCESS
-
-if test "$#" = "0"; then
-  # No parameters specified, issue usage statement and exit.
-  usage
-fi
-
-case "$CC" in
-  gcc)
-    kind="gcc"
-    ;;
-  mpicc|mpcc|mpicc_r)
-    # Is this gcc masquarading as an MPI compiler?
-    if test "`${CC} -v 2>&1 | sed -n 2p | cut -c1-3`" = "gcc"; then
-      kind="gcc"
-    else
-      # Nope
-      kind="$host_os"
-    fi
-    ;;
-  *)
-    kind="$host_os"
-    ;;
-esac
-
-for arg in $@ ; do
-  if test "x$get_output_file" = "xyes"; then
-    link_args="$link_args $arg"
-    output_file="$arg"
-    get_output_file="no"
-    continue
-  fi
-
-  case "$arg" in
-    -c)
-      allargs="$allargs $arg"
-      compile_args="$compile_args $arg"
-
-      if test "x$do_link" = "xyes" -a -n "$output_file"; then
-        compile_args="$compile_args -o $output_file"
-      fi
-
-      do_link="no"
-      dash_c="yes"
-      ;;
-    -o)
-      allargs="$allargs $arg"
-      dash_o="yes"
-
-      if test "x$dash_c" = "xyes"; then
-        compile_args="$compile_args $arg"
-      else
-        link_args="$link_args $arg"
-        do_link="yes"
-        get_output_file="yes"
-      fi
-      ;;
-    -E|-M|-MT)
-      allargs="$allargs $arg"
-      compile_args="$compile_args $arg"
-      dash_c="yes"
-      do_link="no"
-      ;;
-    -l*)
-      libraries=" $libraries $arg "
-      allargs="$allargs $arg"
-      ;;
-    -prefix=*)
-      prefix="`expr "$arg" : '-prefix=\(.*\)'`"
-      ;;
-    -echo)
-      set -x
-      ;;
-    -show)
-      SHOW="echo"
-      ;;
-    -showconfig)
-      showconfigure
-      exit $status
-      ;;
-    -shlib)
-      USE_SHARED_LIB="yes"
-      ;;
-    -noshlib)
-      USE_SHARED_LIB="no"
-      ;;
-    -help)
-      usage
-      ;;
-    *\"*)
-      qarg="'"$arg"'"
-      allargs="$allargs $qarg"
-      ;;
-    *\'*)
-      qarg='\"'"$arg"'\"'
-      allargs="$allargs $qarg"
-      ;;
-    *)
-      allargs="$allargs $qarg"
-
-      if test -s "$arg"; then
-        ext=`expr "$arg" : '.*\(\..*\)'`
-
-        if test "x$ext" = "x.c"; then
-          do_compile="yes"
-          compile_args="$compile_args $arg"
-          fname=`basename $arg .c`
-          link_objs="$link_objs $fname.o"
-        elif test "x$ext" = "x.o"; then
-          if test "x$dash_c" = "xyes"; then
-            compile_args="$compile_args $arg"
-          else
-            do_link="yes"
-            link_objs="$link_objs $arg"
-          fi
-        elif test "x$ext" = "x.a"; then
-          # This is an archive that we're linking in
-          libraries=" $libraries $arg "
-        else
-          compile_args="$compile_args $arg"
-          link_args="$link_args $arg"
-        fi
-      else
-        compile_args="$compile_args $arg"
-        link_args="$link_args $arg"
-      fi
-      ;;
-  esac
-done
-
-if test "$dash_c" = "yes" -a "$do_compile" = no -a "$do_link" = no ; then
-    # -c was specified.  Force do_compile on.
-    do_compile=yes
-fi
-
-if test "x$do_compile" = "xyes"; then
-  if test "x$dash_c" != "xyes"; then
-    compile_args="-c $compile_args"
-  fi
-
-  $SHOW $CC -I$includedir $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $compile_args
-  status=$?
-
-  if test "$status" != "0"; then
-    exit $status
-  fi
-fi
-
-if test "x$do_link" = "xyes"; then
-  shared_link=""
-# conditionnaly link with the hl library  
-  if test "X$HL" = "Xhl"; then
-   libraries=" $libraries -lhdf5_hl -lhdf5 "
-  else
-   libraries=" $libraries  -lhdf5 "
-  fi
-  link_args="$link_args -L${libdir}"
-
-  case "$kind" in
-    gcc|linux*)
-      # MacOS X doesn't support the "-Wl,-rpath -Wl," style of linker flags.
-      # It appears to want none of them specified.
-      case "$host_os" in
-        darwin*)          flag="" ;;
-        *)                flag="-Wl,-rpath -Wl," ;;
-      esac
-      ;;
-    hpux*)                flag="-Wl,+b -Wl," ;;
-    freebsd*|solaris*)    flag="-R" ;;
-    rs6000*|aix*)         flag="-L" ;;
-    sgi)                  flag="-rpath " ;;
-    *)                    flag="" ;;
-  esac
-
-  if test -n "$flag"; then
-    shared_link="${flag}${libdir}"
-  fi
-
-  if test "x$USE_SHARED_LIB" != "xyes"; then
-    # The "-lhdf5" & "-lhdf5_hl" flags are in here already...This is a static
-    # compile though, so change it to the static version (.a) of the library.
-    new_libraries=""
-    for lib in $libraries; do
-      case "$lib" in
-        -lhdf5)
-          new_libraries="$new_libraries ${libdir}/libhdf5.a"
-          ;;
-        -lhdf5_hl)
-          new_libraries="$new_libraries ${libdir}/libhdf5_hl.a"
-          ;;
-        *)
-          new_libraries="$new_libraries $lib"
-          ;;
-      esac
-    done
-    libraries="$new_libraries"
-  fi
-
-  for lib in $libraries; do
-    if echo $link_args | grep " $lib " > /dev/null ||
-       echo $link_args | grep " $lib$" > /dev/null; then
-      :
-    else
-      link_args="$link_args $lib "
-    fi
-  done
-
-  # The LIBS are just a bunch of -l* libraries necessary for the HDF5
-  # module. It's okay if they're included twice in the compile line.
-  link_args="$link_args $H5BLD_LDFLAGS $H5BLD_LIBS"
-
-  # User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's 
-  # LDFLAGS come just before clibpath, user's LIBS come after $link_objs and 
-  # before the hdf5 libraries in $link_args, followed by any external library 
-  # paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in 
-  # from the hdf5 build. The order of the flags is intended to give precedence
-  # to the user's flags.
-  $SHOW $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args $shared_link
-  status=$?
-fi
-
-exit $status