Moved h5cc.in and h5redeploy.in from tools/misc to bin directory. They

should always be built and installed whether tools are enabled or
disabled.  Also added Makefile.am to bin to build h5redeploy and
to install and uninstall them.  h5cc is created from h5cc.in by
configure.

2 files changed, 0 insertions, 227 deletions

diff --git a/tools/src/misc/Makefile.am b/tools/src/misc/Makefile.am
index 1353021..f1d2aaf 100644
--- a/tools/src/misc/Makefile.am
+++ b/tools/src/misc/Makefile.am
@@ -23,7 +23,6 @@ AM_CPPFLAGS+=-I$(top_srcdir)/src -I$(top_srcdir)/tools/lib
 
 # These are our main targets, the tools
 bin_PROGRAMS=h5debug h5repart h5mkgrp h5clear
-bin_SCRIPTS=h5redeploy
 
 # Add h5debug, h5repart, and h5mkgrp specific linker flags here
 h5debug_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
@@ -31,17 +30,7 @@ h5repart_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
 h5mkgrp_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
 h5clear_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
 
-# Tell automake to clean h5redeploy script
-CLEANFILES=h5redeploy
-
-# These were generated by configure.  Remove them only when distclean.
-DISTCLEANFILES=h5cc
-
 # All programs rely on hdf5 library and h5tools library
 LDADD=$(LIBH5TOOLS) $(LIBHDF5)
 
-# How to build h5redeploy script
-h5redeploy: h5redeploy.in
-	@cp $(srcdir)/$@.in $@
-
 include $(top_srcdir)/config/conclude.am
diff --git a/tools/src/misc/h5redeploy.in b/tools/src/misc/h5redeploy.in
deleted file mode 100644
index 242459a..0000000
--- a/tools/src/misc/h5redeploy.in
+++ /dev/null
@@ -1,216 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the COPYING file, which can be found at the root of the source code
-# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
-# If you do not have access to either file, you may request a copy from
-# help@hdfgroup.org.
-#
-
-## Update HDF5 compiler tools after the HDF5 software has been installed  ##
-## in a new location.							  ##
-## For help page, use "h5redeploy -help"				  ##
-##									  ##
-
-# Constants definitions
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-# Function definitions
-
-# show help page
-usage() {
-  # A wonderfully informative "usage" message.
-  echo "usage: $prog_name [OPTIONS]"
-  echo "  OPTIONS:"
-  echo "    -help|help        This help message"
-  echo "    -echo             Show all the shell commands executed"
-  echo "    -force            No prompt, just do it"
-  echo "    -prefix=DIR       New directory to find HDF5 lib/ and include/"
-  echo "                        subdirectories [default: current directory]"
-  echo "    -exec-prefix=DIR  New directory to find HDF5 lib/"
-  echo "                        subdirectory [default: <prefix>]"
-  echo "    -libdir=DIR       New directory for the HDF5 lib directory"
-  echo "                        [default: <exec-prefix>/lib]"
-  echo "    -includedir=DIR   New directory for the HDF5 header files"
-  echo "                        [default: <prefix>/include]"
-  echo "    -tool=TOOL        Tool to update. TOOL must be in the current"
-  echo "                        directory and writable. [default: $h5tools]"
-  echo "    -show             Show the commands without executing them"
-  echo " "
-  exit $EXIT_FAILURE
-}
-
-# display variable values
-dump_vars(){
-    echo "====Showing all variable values====="
-    echo prefix=$prefix
-    echo h5tools=$h5tools
-    echo "====End Showing====="
-}
-
-# show actions to be taken
-show_action()
-{
-    echo "Update the following tools because they are now installed at a new directory"
-    for t in $foundtools; do
-	echo "${t}:"
-	echo "   current setting=`sed -e '/^prefix=/s/prefix=//p' -e d $t`"
-	echo "   new     setting="\""$prefix"\"
-    done
-}
-
-
-# Report Error message
-ERROR()
-{
-    echo "***ERROR***"
-    echo "$1"
-}
-
-# Main
-#
-############################################################################
-## Installation directories:						  ##
-## prefix	architecture-independent files.				  ##
-## exec_prefix	architecture-dependent files, default is <prefix>.	  ##
-## libdir	libraries, default is <exec_prefix>/lib.		  ##
-## includedir	header files, default is <prefix/include>.		  ##
-## Not used here:							  ##
-## bindir	executables, <exec_prefix/bin>.				  ##
-############################################################################
-# Initialization
-h5tools="h5cc h5pcc h5fc h5pfc h5c++"	# possible hdf5 tools
-foundtools=		# tools found and will be modified
-fmode=			# force mode, default is off
-prefix=
-exec_prefix=
-libdir=
-includedir=
-
-# Parse options
-for arg in $@ ; do
-  case "$arg" in
-    -prefix=*)
-      prefix="`echo $arg | cut -f2 -d=`"
-      ;;
-    -exec-prefix=*)
-      exec_prefix="`echo $arg | cut -f2 -d=`"
-      ;;
-    -libdir=*)
-      libdir="`echo $arg | cut -f2 -d=`"
-      ;;
-    -includedir=*)
-      includedir="`echo $arg | cut -f2 -d=`"
-      ;;
-    -echo)
-      set -x
-      ;;
-    -show)
-      SHOW="echo"
-      ;;
-    -tool=*)
-      h5tools="`echo $arg | cut -f2 -d=`"
-      ;;
-    -help|help)
-      usage
-      ;;
-    -force)
-      fmode=yes
-      ;;
-    *)
-      ERROR "Unknown Option($arg)"
-      usage
-      exit $EXIT_FAILURE
-      ;;
-  esac
-done
-
-# Set to default value, one above where i am, if not given by user
-if [ -z "$prefix" ]; then
-    prefix=`(cd ..;pwd)`
-fi
-if [ -z "$exec_prefix" ]; then
-    exec_prefix='${prefix}'		# use single quotes to prevent expansion of $
-fi
-if [ -z "$libdir" ]; then
-    libdir='${exec_prefix}'/lib	# use single quotes to prevent expansion of $
-fi
-if [ -z "$includedir" ]; then
-    includedir='${prefix}'/include # use single quotes to prevent expansion of $
-fi
-
-for x in $h5tools; do
-    if [ -f $x ]; then
-	foundtools="$foundtools $x"
-	if [ ! -w $x ]; then
-	    ERROR "h5tool($x) is not writable"
-	    exit $EXIT_FAILURE
-	fi
-    fi
-done
-
-if [ -z "$foundtools" ]; then
-    ERROR "found no tools to modify"
-    exit $EXIT_FAILURE
-fi
-
-# Show actions to be taken and get consent
-show_action
-# Ask confirmation unless fmode is on
-if [ x-$fmode = x- ]; then
-    echo "Continue? (yes/no)"
-    read ansx
-    ans=`echo $ansx | tr "[A-Z]" "[a-z]"`
-    if [ x-$ans != x-yes ]; then
-	echo ABORT.  No tools changed.
-	exit $EXIT_FAILURE
-    fi
-fi
-
-
-# Create the update commands
-CMDFILE=/tmp/h5redeploy.$$
-touch $CMDFILE
-chmod 0600 $CMDFILE
-echo "/^prefix=/c"                    >> $CMDFILE
-echo prefix=\""$prefix"\"             >> $CMDFILE
-echo .                                >> $CMDFILE
-echo "/^exec_prefix=/c"               >> $CMDFILE
-echo exec_prefix=\""$exec_prefix"\"   >> $CMDFILE
-echo .                                >> $CMDFILE
-echo "/^libdir=/c"                    >> $CMDFILE
-echo libdir=\""$libdir"\"             >> $CMDFILE
-echo .                                >> $CMDFILE
-echo "/^includedir=/c"                >> $CMDFILE
-echo includedir=\""$includedir"\"     >> $CMDFILE
-echo .                                >> $CMDFILE
-(echo w; echo q)                      >> $CMDFILE
-
-
-# Update them
-if [ "$SHOW" = "echo" ]; then
-    echo "===Update commands are:===="
-    cat $CMDFILE
-    echo "===End Update commands====="
-fi
-
-for t in $foundtools; do
-    echo Update $t ...
-    COMMAND="ed - $t"
-    if [ "$SHOW" = "echo" ]; then
-	echo $COMMAND
-    else
-	$COMMAND < $CMDFILE
-    fi
-done
-
-
-# Cleanup
-rm -f $CMDFILE
-exit $EXIT_SUCCESS