Split tools into src and test - add folders

1 files changed, 1345 insertions, 0 deletions

diff --git a/tools/test/h5dump/testh5dump.sh.in b/tools/test/h5dump/testh5dump.sh.in
new file mode 100644
index 0000000..14d753c
--- /dev/null
+++ b/tools/test/h5dump/testh5dump.sh.in
@@ -0,0 +1,1345 @@
+#! /bin/sh
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# Tests for the h5dump tool
+
+srcdir=@srcdir@
+
+USE_FILTER_SZIP="@USE_FILTER_SZIP@"
+USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
+
+TESTNAME=h5dump
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+DUMPER=../../src/h5dump/h5dump                     # The tool name
+DUMPER_BIN=`pwd`/$DUMPER          # The path of the tool binary
+
+H5DIFF=../../src/h5diff/h5diff           # The h5diff tool name
+H5DIFF_BIN=`pwd`/$H5DIFF          # The path of the h5diff  tool binary
+
+H5IMPORT=../../src/h5import/h5import     # The h5import tool name
+H5IMPORT_BIN=`pwd`/$H5IMPORT      # The path of the h5import  tool binary
+
+RM='rm -rf'
+CMP='cmp'
+DIFF='diff -c'
+CP='cp'
+DIRNAME='dirname'
+LS='ls'
+AWK='awk'
+
+# Skip plugin module to test missing filter
+ENVCMD="env HDF5_PLUGIN_PRELOAD=::"
+
+nerrors=0
+verbose=yes
+
+# source dirs
+SRC_TOOLS="$srcdir/../.."
+
+SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
+# testfiles source dirs for tools
+SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DUMP_ERRORFILES="$srcdir/errfiles"
+SRC_H5DIFF_TESTFILES="$SRC_TOOLS/test/h5diff/testfiles"
+SRC_H5COPY_TESTFILES="$SRC_TOOLS/test/h5copy/testfiles"
+SRC_H5REPACK_TESTFILES="$SRC_TOOLS/test/h5repack/testfiles"
+SRC_H5JAM_TESTFILES="$SRC_TOOLS/test/h5jam/testfiles"
+SRC_H5STAT_TESTFILES="$SRC_TOOLS/test/h5stat/testfiles"
+SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/test/h5import/testfiles"
+
+TEST_P_DIR=./testfiles
+TESTDIR=./testfiles/std
+test -d $TEST_P_DIR || mkdir -p $TEST_P_DIR
+test -d $TESTDIR || mkdir -p $TESTDIR
+
+######################################################################
+# test files
+# --------------------------------------------------------------------
+# All the test files copy from source directory to test directory
+# NOTE: Keep this framework to add/remove test files.
+#       Any test files from other tools can be used in this framework.
+#       This list are also used for checking exist.
+#       Comment '#' without space can be used.
+# --------------------------------------------------------------------
+LIST_HDF5_TEST_FILES="
+$SRC_H5DUMP_TESTFILES/charsets.h5
+$SRC_H5DUMP_TESTFILES/file_space.h5
+$SRC_H5DUMP_TESTFILES/filter_fail.h5
+$SRC_H5DUMP_TESTFILES/packedbits.h5
+$SRC_H5DUMP_TESTFILES/taindices.h5
+$SRC_H5DUMP_TESTFILES/tall.h5
+$SRC_H5DUMP_TESTFILES/tarray1.h5
+$SRC_H5DUMP_TESTFILES/tarray1_big.h5
+$SRC_H5DUMP_TESTFILES/tarray2.h5
+$SRC_H5DUMP_TESTFILES/tarray3.h5
+$SRC_H5DUMP_TESTFILES/tarray4.h5
+$SRC_H5DUMP_TESTFILES/tarray5.h5
+$SRC_H5DUMP_TESTFILES/tarray6.h5
+$SRC_H5DUMP_TESTFILES/tarray7.h5
+$SRC_H5DUMP_TESTFILES/tarray8.h5
+$SRC_H5DUMP_TESTFILES/tattr.h5
+$SRC_H5DUMP_TESTFILES/tattr2.h5
+$SRC_H5DUMP_TESTFILES/tattr4_be.h5
+$SRC_H5DUMP_TESTFILES/tattrintsize.h5
+$SRC_H5DUMP_TESTFILES/tattrreg.h5
+$SRC_H5DUMP_TESTFILES/tbigdims.h5
+$SRC_H5DUMP_TESTFILES/tbinary.h5
+$SRC_H5DUMP_TESTFILES/tchar.h5
+$SRC_H5DUMP_TESTFILES/tcmpdattrintsize.h5
+$SRC_H5DUMP_TESTFILES/tcmpdintsize.h5
+$SRC_H5DUMP_TESTFILES/tcompound.h5
+$SRC_H5DUMP_TESTFILES/tcompound_complex.h5
+$SRC_H5DUMP_TESTFILES/tcompound_complex2.h5
+$SRC_H5DUMP_TESTFILES/tdatareg.h5
+$SRC_H5DUMP_TESTFILES/tdset.h5
+$SRC_H5DUMP_TESTFILES/tempty.h5
+$SRC_H5DUMP_TESTFILES/tsoftlinks.h5
+$SRC_H5DUMP_TESTFILES/textlinkfar.h5
+$SRC_H5DUMP_TESTFILES/textlinksrc.h5
+$SRC_H5DUMP_TESTFILES/textlinktar.h5
+$SRC_H5DUMP_TESTFILES/textlink.h5
+$SRC_H5DUMP_TESTFILES/tfamily00000.h5
+$SRC_H5DUMP_TESTFILES/tfamily00001.h5
+$SRC_H5DUMP_TESTFILES/tfamily00002.h5
+$SRC_H5DUMP_TESTFILES/tfamily00003.h5
+$SRC_H5DUMP_TESTFILES/tfamily00004.h5
+$SRC_H5DUMP_TESTFILES/tfamily00005.h5
+$SRC_H5DUMP_TESTFILES/tfamily00006.h5
+$SRC_H5DUMP_TESTFILES/tfamily00007.h5
+$SRC_H5DUMP_TESTFILES/tfamily00008.h5
+$SRC_H5DUMP_TESTFILES/tfamily00009.h5
+$SRC_H5DUMP_TESTFILES/tfamily00010.h5
+$SRC_H5DUMP_TESTFILES/tfcontents1.h5
+$SRC_H5DUMP_TESTFILES/tfcontents2.h5
+$SRC_H5DUMP_TESTFILES/tfilters.h5
+$SRC_H5DUMP_TESTFILES/tfpformat.h5
+$SRC_H5DUMP_TESTFILES/tfvalues.h5
+$SRC_H5DUMP_TESTFILES/tgroup.h5
+$SRC_H5DUMP_TESTFILES/tgrp_comments.h5
+$SRC_H5DUMP_TESTFILES/thlink.h5
+$SRC_H5DUMP_TESTFILES/thyperslab.h5
+$SRC_H5DUMP_TESTFILES/tintsattrs.h5
+$SRC_H5DUMP_TESTFILES/tints4dims.h5
+$SRC_H5DUMP_TESTFILES/tlarge_objname.h5
+#$SRC_H5DUMP_TESTFILES/tldouble.h5
+$SRC_H5DUMP_TESTFILES/tlonglinks.h5
+$SRC_H5DUMP_TESTFILES/tloop.h5
+$SRC_H5DUMP_TESTFILES/tmulti-b.h5
+$SRC_H5DUMP_TESTFILES/tmulti-g.h5
+$SRC_H5DUMP_TESTFILES/tmulti-l.h5
+$SRC_H5DUMP_TESTFILES/tmulti-o.h5
+$SRC_H5DUMP_TESTFILES/tmulti-r.h5
+$SRC_H5DUMP_TESTFILES/tmulti-s.h5
+$SRC_H5DUMP_TESTFILES/tnamed_dtype_attr.h5
+$SRC_H5DUMP_TESTFILES/tnestedcomp.h5
+$SRC_H5DUMP_TESTFILES/tnestedcmpddt.h5
+$SRC_H5DUMP_TESTFILES/tno-subset.h5
+$SRC_H5DUMP_TESTFILES/tnullspace.h5
+$SRC_H5DUMP_TESTFILES/zerodim.h5
+$SRC_H5DUMP_TESTFILES/torderattr.h5
+$SRC_H5DUMP_TESTFILES/tordergr.h5
+$SRC_H5DUMP_TESTFILES/tsaf.h5
+$SRC_H5DUMP_TESTFILES/tscalarattrintsize.h5
+$SRC_H5DUMP_TESTFILES/tscalarintattrsize.h5
+$SRC_H5DUMP_TESTFILES/tscalarintsize.h5
+$SRC_H5DUMP_TESTFILES/tscalarstring.h5
+$SRC_H5DUMP_TESTFILES/tslink.h5
+$SRC_H5DUMP_TESTFILES/tsplit_file-m.h5
+$SRC_H5DUMP_TESTFILES/tsplit_file-r.h5
+$SRC_H5DUMP_TESTFILES/tstr.h5
+$SRC_H5DUMP_TESTFILES/tstr2.h5
+$SRC_H5DUMP_TESTFILES/tstr3.h5
+$SRC_H5DUMP_TESTFILES/tudlink.h5
+$SRC_H5DUMP_TESTFILES/tvldtypes1.h5
+$SRC_H5DUMP_TESTFILES/tvldtypes2.h5
+$SRC_H5DUMP_TESTFILES/tvldtypes3.h5
+$SRC_H5DUMP_TESTFILES/tvldtypes4.h5
+$SRC_H5DUMP_TESTFILES/tvldtypes5.h5
+$SRC_H5DUMP_TESTFILES/tvlenstr_array.h5
+$SRC_H5DUMP_TESTFILES/tvlstr.h5
+$SRC_H5DUMP_TESTFILES/tvms.h5
+"
+
+LIST_OTHER_TEST_FILES="
+$SRC_H5DUMP_TESTFILES/charsets.ddl
+$SRC_H5DUMP_TESTFILES/file_space.ddl
+$SRC_H5DUMP_TESTFILES/filter_fail.ddl
+$SRC_H5DUMP_TESTFILES/non_existing.ddl
+$SRC_H5DUMP_TESTFILES/packedbits.ddl
+$SRC_H5DUMP_TESTFILES/tall-1.ddl
+$SRC_H5DUMP_TESTFILES/tall-2.ddl
+$SRC_H5DUMP_TESTFILES/tall-2A.ddl
+$SRC_H5DUMP_TESTFILES/tall-2A0.ddl
+$SRC_H5DUMP_TESTFILES/tall-2B.ddl
+$SRC_H5DUMP_TESTFILES/tall-3.ddl
+$SRC_H5DUMP_TESTFILES/tall-4s.ddl
+$SRC_H5DUMP_TESTFILES/tall-5s.ddl
+$SRC_H5DUMP_TESTFILES/tall-6.ddl
+$SRC_H5DUMP_TESTFILES/tall-6.exp
+$SRC_H5DUMP_TESTFILES/tall-7.ddl
+$SRC_H5DUMP_TESTFILES/tall-7N.ddl
+$SRC_H5DUMP_TESTFILES/tallfilters.ddl
+$SRC_H5DUMP_TESTFILES/tarray1.ddl
+$SRC_H5DUMP_TESTFILES/tarray1_big.ddl
+$SRC_H5DUMP_TESTFILES/tarray2.ddl
+$SRC_H5DUMP_TESTFILES/tarray3.ddl
+$SRC_H5DUMP_TESTFILES/tarray4.ddl
+$SRC_H5DUMP_TESTFILES/tarray5.ddl
+$SRC_H5DUMP_TESTFILES/tarray6.ddl
+$SRC_H5DUMP_TESTFILES/tarray7.ddl
+$SRC_H5DUMP_TESTFILES/tarray8.ddl
+$SRC_H5DUMP_TESTFILES/tattr-1.ddl
+$SRC_H5DUMP_TESTFILES/tattr-2.ddl
+$SRC_H5DUMP_TESTFILES/tattr-3.ddl
+$SRC_H5DUMP_TESTFILES/tattr-4_be.ddl
+$SRC_H5DUMP_TESTFILES/tattrcontents1.ddl
+$SRC_H5DUMP_TESTFILES/tattrcontents2.ddl
+$SRC_H5DUMP_TESTFILES/tattrintsize.ddl
+$SRC_H5DUMP_TESTFILES/tattrreg.ddl
+$SRC_H5DUMP_TESTFILES/tattrregR.ddl
+$SRC_H5DUMP_TESTFILES/tbin1.ddl
+$SRC_H5DUMP_TESTFILES/tbin1.ddl
+$SRC_H5DUMP_TESTFILES/tbin2.ddl
+$SRC_H5DUMP_TESTFILES/tbin3.ddl
+$SRC_H5DUMP_TESTFILES/tbin4.ddl
+$SRC_H5DUMP_TESTFILES/tbinregR.ddl
+$SRC_H5DUMP_TESTFILES/tbigdims.ddl
+$SRC_H5DUMP_TESTFILES/tboot1.ddl
+$SRC_H5DUMP_TESTFILES/tboot2.ddl
+$SRC_H5DUMP_TESTFILES/tboot2A.ddl
+$SRC_H5DUMP_TESTFILES/tboot2B.ddl
+$SRC_H5DUMP_TESTFILES/tchar1.ddl
+$SRC_H5DUMP_TESTFILES/tchunked.ddl
+$SRC_H5DUMP_TESTFILES/tcmpdattrintsize.ddl
+$SRC_H5DUMP_TESTFILES/tcmpdintsize.ddl
+$SRC_H5DUMP_TESTFILES/tcomp-1.ddl
+$SRC_H5DUMP_TESTFILES/tcomp-2.ddl
+$SRC_H5DUMP_TESTFILES/tcomp-3.ddl
+$SRC_H5DUMP_TESTFILES/tcomp-4.ddl
+$SRC_H5DUMP_TESTFILES/tcompound_complex2.ddl
+$SRC_H5DUMP_TESTFILES/tcompact.ddl
+$SRC_H5DUMP_TESTFILES/tcontents.ddl
+$SRC_H5DUMP_TESTFILES/tcontiguos.ddl
+$SRC_H5DUMP_TESTFILES/tdatareg.ddl
+$SRC_H5DUMP_TESTFILES/tdataregR.ddl
+$SRC_H5DUMP_TESTFILES/tdeflate.ddl
+$SRC_H5DUMP_TESTFILES/tdset-1.ddl
+$SRC_H5DUMP_TESTFILES/tdset-2.ddl
+$SRC_H5DUMP_TESTFILES/tdset-3s.ddl
+$SRC_H5DUMP_TESTFILES/tempty.ddl
+$SRC_H5DUMP_TESTFILES/texceedsubstart.ddl
+$SRC_H5DUMP_TESTFILES/texceedsubcount.ddl
+$SRC_H5DUMP_TESTFILES/texceedsubstride.ddl
+$SRC_H5DUMP_TESTFILES/texceedsubblock.ddl
+$SRC_H5DUMP_TESTFILES/texternal.ddl
+$SRC_H5DUMP_TESTFILES/textlinksrc.ddl
+$SRC_H5DUMP_TESTFILES/textlinkfar.ddl
+$SRC_H5DUMP_TESTFILES/textlink.ddl
+$SRC_H5DUMP_TESTFILES/tfamily.ddl
+$SRC_H5DUMP_TESTFILES/tfill.ddl
+$SRC_H5DUMP_TESTFILES/tfletcher32.ddl
+$SRC_H5DUMP_TESTFILES/tfpformat.ddl
+$SRC_H5DUMP_TESTFILES/tgroup-1.ddl
+$SRC_H5DUMP_TESTFILES/tgroup-2.ddl
+$SRC_H5DUMP_TESTFILES/tgrp_comments.ddl
+$SRC_H5DUMP_TESTFILES/thlink-1.ddl
+$SRC_H5DUMP_TESTFILES/thlink-2.ddl
+$SRC_H5DUMP_TESTFILES/thlink-3.ddl
+$SRC_H5DUMP_TESTFILES/thlink-4.ddl
+$SRC_H5DUMP_TESTFILES/thlink-5.ddl
+$SRC_H5DUMP_TESTFILES/thyperslab.ddl
+$SRC_H5DUMP_TESTFILES/tindicesno.ddl
+$SRC_H5DUMP_TESTFILES/tindicessub1.ddl
+$SRC_H5DUMP_TESTFILES/tindicessub2.ddl
+$SRC_H5DUMP_TESTFILES/tindicessub3.ddl
+$SRC_H5DUMP_TESTFILES/tindicessub4.ddl
+$SRC_H5DUMP_TESTFILES/tindicesyes.ddl
+$SRC_H5DUMP_TESTFILES/tints4dims.ddl
+$SRC_H5DUMP_TESTFILES/tints4dimsBlock2.ddl
+$SRC_H5DUMP_TESTFILES/tints4dimsBlockEq.ddl
+$SRC_H5DUMP_TESTFILES/tints4dimsCount2.ddl
+$SRC_H5DUMP_TESTFILES/tints4dimsCountEq.ddl
+$SRC_H5DUMP_TESTFILES/tints4dimsStride2.ddl
+$SRC_H5DUMP_TESTFILES/tintsattrs.ddl
+$SRC_H5DUMP_TESTFILES/tlarge_objname.ddl
+#$SRC_H5DUMP_TESTFILES/tldouble.ddl
+$SRC_H5DUMP_TESTFILES/tlonglinks.ddl
+$SRC_H5DUMP_TESTFILES/tloop-1.ddl
+$SRC_H5DUMP_TESTFILES/tmulti.ddl
+$SRC_H5DUMP_TESTFILES/tmultifile.ddl
+$SRC_H5DUMP_TESTFILES/tqmarkfile.ddl
+$SRC_H5DUMP_TESTFILES/tstarfile.ddl
+$SRC_H5DUMP_TESTFILES/tnamed_dtype_attr.ddl
+$SRC_H5DUMP_TESTFILES/tnestcomp-1.ddl
+$SRC_H5DUMP_TESTFILES/tnestedcmpddt.ddl
+$SRC_H5DUMP_TESTFILES/tnbit.ddl
+$SRC_H5DUMP_TESTFILES/tnoattrdata.ddl
+$SRC_H5DUMP_TESTFILES/tnoattrddl.ddl
+$SRC_H5DUMP_TESTFILES/tnodata.ddl
+$SRC_H5DUMP_TESTFILES/tnoddl.ddl
+$SRC_H5DUMP_TESTFILES/tnoddlfile.ddl
+$SRC_H5DUMP_TESTFILES/tnoddlfile.exp
+$SRC_H5DUMP_TESTFILES/tno-subset.ddl
+$SRC_H5DUMP_TESTFILES/tnullspace.ddl
+$SRC_H5DUMP_TESTFILES/trawdatafile.ddl
+$SRC_H5DUMP_TESTFILES/trawdatafile.exp
+$SRC_H5DUMP_TESTFILES/trawssetfile.ddl
+$SRC_H5DUMP_TESTFILES/trawssetfile.exp
+$SRC_H5DUMP_TESTFILES/zerodim.ddl
+$SRC_H5DUMP_TESTFILES/tordergr1.ddl
+$SRC_H5DUMP_TESTFILES/tordergr2.ddl
+$SRC_H5DUMP_TESTFILES/tordergr3.ddl
+$SRC_H5DUMP_TESTFILES/tordergr4.ddl
+$SRC_H5DUMP_TESTFILES/tordergr5.ddl
+$SRC_H5DUMP_TESTFILES/torderattr1.ddl
+$SRC_H5DUMP_TESTFILES/torderattr2.ddl
+$SRC_H5DUMP_TESTFILES/torderattr3.ddl
+$SRC_H5DUMP_TESTFILES/torderattr4.ddl
+$SRC_H5DUMP_TESTFILES/tordercontents1.ddl
+$SRC_H5DUMP_TESTFILES/tordercontents2.ddl
+$SRC_H5DUMP_TESTFILES/torderlinks1.ddl
+$SRC_H5DUMP_TESTFILES/torderlinks2.ddl
+$SRC_H5DUMP_TESTFILES/tperror.ddl
+$SRC_H5DUMP_TESTFILES/treadfilter.ddl
+$SRC_H5DUMP_TESTFILES/treadintfilter.ddl
+$SRC_H5DUMP_TESTFILES/treference.ddl
+$SRC_H5DUMP_TESTFILES/tsaf.ddl
+$SRC_H5DUMP_TESTFILES/tscalarattrintsize.ddl
+$SRC_H5DUMP_TESTFILES/tscalarintattrsize.ddl
+$SRC_H5DUMP_TESTFILES/tscalarintsize.ddl
+$SRC_H5DUMP_TESTFILES/tscalarstring.ddl
+$SRC_H5DUMP_TESTFILES/tscaleoffset.ddl
+$SRC_H5DUMP_TESTFILES/tshuffle.ddl
+$SRC_H5DUMP_TESTFILES/tslink-1.ddl
+$SRC_H5DUMP_TESTFILES/tslink-2.ddl
+$SRC_H5DUMP_TESTFILES/tslink-D.ddl
+$SRC_H5DUMP_TESTFILES/tsplit_file.ddl
+$SRC_H5DUMP_TESTFILES/tstr-1.ddl
+$SRC_H5DUMP_TESTFILES/tstr-2.ddl
+$SRC_H5DUMP_TESTFILES/tstr2bin2.exp
+$SRC_H5DUMP_TESTFILES/tstr2bin6.exp
+$SRC_H5DUMP_TESTFILES/tstring.ddl
+$SRC_H5DUMP_TESTFILES/tstring2.ddl
+$SRC_H5DUMP_TESTFILES/tstringe.ddl
+$SRC_H5DUMP_TESTFILES/tszip.ddl
+$SRC_H5DUMP_TESTFILES/tudlink-1.ddl
+$SRC_H5DUMP_TESTFILES/tudlink-2.ddl
+$SRC_H5DUMP_TESTFILES/tuserfilter.ddl
+$SRC_H5DUMP_TESTFILES/tvldtypes1.ddl
+$SRC_H5DUMP_TESTFILES/tvldtypes2.ddl
+$SRC_H5DUMP_TESTFILES/tvldtypes3.ddl
+$SRC_H5DUMP_TESTFILES/tvldtypes4.ddl
+$SRC_H5DUMP_TESTFILES/tvldtypes5.ddl
+$SRC_H5DUMP_TESTFILES/tvlenstr_array.ddl
+$SRC_H5DUMP_TESTFILES/tvlstr.ddl
+$SRC_H5DUMP_TESTFILES/tvms.ddl
+$SRC_H5DUMP_TESTFILES/twidedisplay.ddl
+$SRC_H5DUMP_TESTFILES/twithddl.exp
+$SRC_H5DUMP_TESTFILES/twithddlfile.ddl
+$SRC_H5DUMP_TESTFILES/twithddlfile.exp
+$SRC_H5DUMP_TESTFILES/h5dump-help.txt
+$SRC_H5DUMP_TESTFILES/out3.h5import
+$SRC_H5DUMP_TESTFILES/tbinregR.exp
+"
+
+LIST_ERROR_TEST_FILES="
+${SRC_H5DUMP_ERRORFILES}/filter_fail.err
+${SRC_H5DUMP_ERRORFILES}/non_existing.err
+${SRC_H5DUMP_ERRORFILES}/tall-1.err
+${SRC_H5DUMP_ERRORFILES}/tall-2A.err
+${SRC_H5DUMP_ERRORFILES}/tall-2A0.err
+${SRC_H5DUMP_ERRORFILES}/tall-2B.err
+${SRC_H5DUMP_ERRORFILES}/tarray1_big.err
+${SRC_H5DUMP_ERRORFILES}/tattr-3.err
+${SRC_H5DUMP_ERRORFILES}/tattrregR.err
+${SRC_H5DUMP_ERRORFILES}/tcomp-3.err
+${SRC_H5DUMP_ERRORFILES}/tdataregR.err
+${SRC_H5DUMP_ERRORFILES}/tdset-2.err
+${SRC_H5DUMP_ERRORFILES}/texceedsubblock.err
+${SRC_H5DUMP_ERRORFILES}/texceedsubcount.err
+${SRC_H5DUMP_ERRORFILES}/texceedsubstart.err
+${SRC_H5DUMP_ERRORFILES}/texceedsubstride.err
+${SRC_H5DUMP_ERRORFILES}/textlink.err
+${SRC_H5DUMP_ERRORFILES}/textlinkfar.err
+${SRC_H5DUMP_ERRORFILES}/textlinksrc.err
+${SRC_H5DUMP_ERRORFILES}/tgroup-2.err
+${SRC_H5DUMP_ERRORFILES}/torderlinks1.err
+${SRC_H5DUMP_ERRORFILES}/torderlinks2.err
+${SRC_H5DUMP_ERRORFILES}/tperror.err
+${SRC_H5DUMP_ERRORFILES}/tqmarkfile.err
+${SRC_H5DUMP_ERRORFILES}/tslink-D.err
+"
+
+#
+# copy test files and expected output files from source dirs to test dir
+#
+COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES $LIST_ERROR_TEST_FILES"
+
+COPY_TESTFILES_TO_TESTDIR()
+{
+    # copy test files. Used -f to make sure get a new copy
+    for tstfile in $COPY_TESTFILES
+    do
+        # ignore '#' comment
+        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
+        RET=$?
+        if [ $RET -eq 1 ]; then
+            # skip cp if srcdir is same as destdir
+            # this occurs when build/test performed in source dir and
+            # make cp fail
+            SDIR=`$DIRNAME $tstfile`
+            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
+            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
+            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
+                $CP -f $tstfile $TESTDIR
+                if [ $? -ne 0 ]; then
+                    echo "Error: FAILED to copy $tstfile ."
+
+                    # Comment out this to CREATE expected file
+                    exit $EXIT_FAILURE
+                fi
+            fi
+        fi
+    done
+}
+
+CLEAN_TESTFILES_AND_TESTDIR()
+{
+    # skip rm if srcdir is same as destdir
+    # this occurs when build/test performed in source dir and
+    # make cp fail
+    SDIR=$SRC_H5DUMP_TESTFILES
+    INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
+    INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
+    if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
+        $RM $TESTDIR
+    fi
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Testing".
+#
+TESTING() {
+   SPACES="                                                               "
+   echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Source in the output filter function definitions.
+. $srcdir/../../../bin/output_filter.sh
+
+# Run a test and print PASS or *FAIL*.  If a test fails then increment
+# the `nerrors' global variable and (if $verbose is set) display the
+# difference between the actual output and the expected output. The
+# expected output is given as the first argument to this function and
+# the actual output file is calculated by replacing the `.ddl' with
+# `.out'.  The actual output is not removed if $HDF5_NOCLEANUP has a
+# non-zero value.
+# If $1 == ignorecase then do caseless CMP and DIFF.
+# ADD_H5_TEST
+TOOLTEST() {
+    # check if caseless compare and diff requested
+    if [ "$1" = ignorecase ]; then
+    caseless="-i"
+    # replace cmp with diff which runs much longer.
+    xCMP="$DIFF -i"
+    shift
+    else
+    caseless=""
+    # stick with faster cmp if ignorecase is not requested.
+    xCMP="$CMP"
+    fi
+
+    expect="$TESTDIR/$1"
+    actual="$TESTDIR/`basename $1 .ddl`.out"
+    actual_err="$TESTDIR/`basename $1 .ddl`.err"
+    actual_sav=${actual}-sav
+    actual_err_sav=${actual_err}-sav
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+    cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+
+    # save actual and actual_err in case they are needed later.
+    cp $actual $actual_sav
+    STDOUT_FILTER $actual
+    cp $actual_err $actual_err_sav
+    STDERR_FILTER $actual_err
+    cat $actual_err >> $actual
+
+  if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $xCMP $expect $actual > /dev/null 2>&1 ; then
+     echo " PASSED"
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $caseless $expect $actual |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+     rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext
+    fi
+
+}
+
+
+# same as TOOLTEST1 but compares generated file to expected output
+#                   and compares the generated data file to the expected data file
+# used for the binary tests that expect a full path in -o without -b
+# ADD_H5_EXPORT_TEST
+TOOLTEST2() {
+
+    expectdata="$TESTDIR/$1"
+    expect="$TESTDIR/`basename $1 .exp`.ddl"
+    actualdata="$TESTDIR/`basename $1 .exp`.txt"
+    actual="$TESTDIR/`basename $1 .exp`.out"
+    actual_err="$TESTDIR/`basename $1 .exp`.err"
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+    cat $actual_err >> $actual
+
+    if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $CMP $expect $actual; then
+      if [ ! -f $expectdata ]; then
+      # Create the expect data file if it doesn't yet exist.
+        echo " CREATED"
+        cp $actualdata $expectdata
+      elif $CMP $expectdata $actualdata; then
+        echo " PASSED"
+      else
+        echo "*FAILED*"
+        echo "    Expected datafile (*.exp) differs from actual datafile (*.txt)"
+        nerrors="`expr $nerrors + 1`"
+        test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/    /'
+      fi
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+     rm -f $actual $actualdata $actual_err
+    fi
+
+}
+
+# same as TOOLTEST2 but compares generated file to expected ddl file
+#                   and compares the generated data file to the expected data file
+# used for the binary tests that expect a full path in -o without -b
+# ADD_H5_TEST_EXPORT
+TOOLTEST2A() {
+
+    expectdata="$TESTDIR/$1"
+    expect="$TESTDIR/`basename $1 .exp`.ddl"
+    actualdata="$TESTDIR/`basename $1 .exp`.txt"
+    actual="$TESTDIR/`basename $1 .exp`.out"
+    actual_err="$TESTDIR/`basename $1 .exp`.err"
+    shift
+    expectmeta="$TESTDIR/$1"
+    actualmeta="$TESTDIR/`basename $1 .exp`.txt"
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+    cat $actual_err >> $actual
+
+    if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $CMP $expect $actual; then
+      if [ ! -f $expectdata ]; then
+      # Create the expect data file if it doesn't yet exist.
+        echo " CREATED"
+        cp $actualdata $expectdata
+      elif $DIFF $expectdata $actualdata; then
+        if [ ! -f $expectmeta ]; then
+        # Create the expect meta file if it doesn't yet exist.
+          echo " CREATED"
+          cp $actualmeta $expectmeta
+        elif $CMP $expectmeta $actualmeta; then
+          echo " PASSED"
+        else
+          echo "*FAILED*"
+          echo "    Expected metafile (*.ddl) differs from actual metafile (*.txt)"
+          nerrors="`expr $nerrors + 1`"
+          test yes = "$verbose" && $DIFF $expectmeta $actualmeta |sed 's/^/    /'
+        fi
+      else
+        echo "*FAILED*"
+        echo "    Expected datafile (*.exp) differs from actual datafile (*.txt)"
+        nerrors="`expr $nerrors + 1`"
+        test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/    /'
+      fi
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+     rm -f $actual $actualdata $actual_err $actualmeta
+    fi
+
+}
+
+# same as TOOLTEST2 but only compares the generated data file to the expected data file
+# used for the binary tests that expect a full path in -o with -b
+# ADD_H5_EXPORT_TEST
+TOOLTEST2B() {
+
+    expectdata="$TESTDIR/$1"
+    actualdata="$TESTDIR/`basename $1 .exp`.txt"
+    actual="$TESTDIR/`basename $1 .exp`.out"
+    actual_err="$TESTDIR/`basename $1 .exp`.err"
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+    cat $actual_err >> $actual
+
+    if [ ! -f $expectdata ]; then
+    # Create the expect data file if it doesn't yet exist.
+      echo " CREATED"
+      cp $actualdata $expectdata
+    elif $CMP $expectdata $actualdata; then
+      echo " PASSED"
+    else
+      echo "*FAILED*"
+      echo "    Expected datafile (*.exp) differs from actual datafile (*.txt)"
+      nerrors="`expr $nerrors + 1`"
+      test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+     rm -f $actual $actualdata $actual_err
+    fi
+
+}
+
+# same as TOOLTEST but filters error stack outp
+# Extract file name, line number, version and thread IDs because they may be different
+TOOLTEST3() {
+
+    expect="$TESTDIR/$1"
+    actual="$TESTDIR/`basename $1 .ddl`.out"
+    actual_err="$TESTDIR/`basename $1 .ddl`.err"
+    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
+    actual_sav=${actual}-sav
+    actual_err_sav=${actual_err}-sav
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+
+    # save actual and actual_err in case they are needed later.
+    cp $actual $actual_sav
+    STDOUT_FILTER $actual
+    cp $actual_err $actual_err_sav
+    STDERR_FILTER $actual_err
+
+    # Extract file name, line number, version and thread IDs because they may be different
+    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
+        -e 's/line [0-9]*/line (number)/' \
+        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
+        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
+        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
+        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
+     $actual_err > $actual_ext
+    cat $actual_ext >> $actual
+
+    if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $CMP $expect $actual; then
+     echo " PASSED"
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+   rm -f $actual $actual_err $actual_sav $actual_err_sav
+    fi
+
+}
+
+# same as TOOLTEST3 but filters error stack output and compares to an error file
+# Extract file name, line number, version and thread IDs because they may be different
+# ADD_H5ERR_MASK_TEST
+TOOLTEST4() {
+
+    expect="$TESTDIR/$1"
+    expect_err="$TESTDIR/`basename $1 .ddl`.err"
+    actual="$TESTDIR/`basename $1 .ddl`.out"
+    actual_err="$TESTDIR/`basename $1 .ddl`.oerr"
+    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
+    actual_sav=${actual}-sav
+    actual_err_sav=${actual_err}-sav
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+
+    # save actual and actual_err in case they are needed later.
+    cp $actual $actual_sav
+    STDOUT_FILTER $actual
+    cp $actual_err $actual_err_sav
+    STDERR_FILTER $actual_err
+
+    # Extract file name, line number, version and thread IDs because they may be different
+    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
+        -e 's/line [0-9]*/line (number)/' \
+        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
+        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
+        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
+        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
+     $actual_err > $actual_ext
+    #cat $actual_ext >> $actual
+
+    if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $CMP $expect $actual; then
+     if $CMP $expect_err $actual_ext; then
+      echo " PASSED"
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.err) differs from actual result (*.oerr)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/    /'
+    fi
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+   rm -f $actual $actual_err $actual_sav $actual_err_sav
+    fi
+
+}
+
+# same as TOOLTEST4 but disables plugin filter loading
+# silences extra error output on some platforms
+# ADD_H5ERR_MASK_TEST
+TOOLTEST5() {
+
+    expect="$TESTDIR/$1"
+    expect_err="$TESTDIR/`basename $1 .ddl`.err"
+    actual="$TESTDIR/`basename $1 .ddl`.out"
+    actual_err="$TESTDIR/`basename $1 .ddl`.oerr"
+    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
+    actual_sav=${actual}-sav
+    actual_err_sav=${actual_err}-sav
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $ENVCMD $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+
+    # save actual and actual_err in case they are needed later.
+    cp $actual $actual_sav
+    STDOUT_FILTER $actual
+    cp $actual_err $actual_err_sav
+    STDERR_FILTER $actual_err
+
+    # Extract file name, line number, version and thread IDs because they may be different
+    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
+        -e 's/line [0-9]*/line (number)/' \
+        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
+        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
+        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
+        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
+     $actual_err > $actual_ext
+    #cat $actual_ext >> $actual
+
+    if [ ! -f $expect ]; then
+    # Create the expect file if it doesn't yet exist.
+     echo " CREATED"
+     cp $actual $expect
+    elif $CMP $expect $actual; then
+     if $CMP $expect_err $actual_ext; then
+      echo " PASSED"
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.err) differs from actual result (*.oerr)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/    /'
+    fi
+    else
+     echo "*FAILED*"
+     echo "    Expected result (*.ddl) differs from actual result (*.out)"
+     nerrors="`expr $nerrors + 1`"
+     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+   rm -f $actual $actual_err $actual_sav $actual_err_sav
+    fi
+
+}
+# ADD_HELP_TEST
+TOOLTEST_HELP() {
+
+    expect="$TESTDIR/$1"
+    actual="$TESTDIR/`basename $1 .txt`.out"
+    actual_err="$TESTDIR/`basename $1 .txt`.err"
+    shift
+
+    # Run test.
+    TESTING $DUMPER $@
+    (
+      cd $TESTDIR
+      $RUNSERIAL $DUMPER_BIN "$@"
+    ) >$actual 2>$actual_err
+    cat $actual_err >> $actual
+
+    if [ ! -f $expectdata ]; then
+    # Create the expect data file if it doesn't yet exist.
+      echo " CREATED"
+      cp $actual $expect-CREATED
+    elif $CMP $expect $actual; then
+      echo " PASSED"
+    else
+      echo "*FAILED*"
+      echo "    Expected output (*.txt) differs from actual output (*.out)"
+      nerrors="`expr $nerrors + 1`"
+    fi
+
+    # Clean up output file
+    if test -z "$HDF5_NOCLEANUP"; then
+     rm -f $actual $actual_err
+    fi
+
+}
+
+# Print a "SKIP" message
+SKIP() {
+   TESTING $DUMPER $@
+    echo  " -SKIP-"
+}
+
+# Print a line-line message left justified in a field of 70 characters
+#
+PRINT_H5DIFF() {
+ SPACES="                                                               "
+ echo " Running h5diff $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+
+# Call the h5diff tool
+#
+DIFFTEST()
+{
+    PRINT_H5DIFF  $@
+    (
+  cd $TESTDIR
+  $RUNSERIAL $H5DIFF_BIN "$@" -q
+    )
+    RET=$?
+    if [ $RET != 0 ] ; then
+         echo "*FAILED*"
+         nerrors="`expr $nerrors + 1`"
+    else
+         echo " PASSED"
+    fi
+
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+PRINT_H5IMPORT() {
+ SPACES="                                                               "
+ echo " Running h5import $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Call the h5import tool
+#
+IMPORTTEST()
+{
+    # remove the output hdf5 file if it exists
+    hdf5_file="$TESTDIR/$5"
+    if [ -f $hdf5_file ]; then
+     rm -f $hdf5_file
+    fi
+
+    PRINT_H5IMPORT  $@
+    (
+  cd $TESTDIR
+  $RUNSERIAL $H5IMPORT_BIN "$@"
+    )
+    RET=$?
+    if [ $RET != 0 ] ; then
+         echo "*FAILED*"
+         nerrors="`expr $nerrors + 1`"
+    else
+         echo " PASSED"
+    fi
+
+}
+
+
+##############################################################################
+##############################################################################
+###        T H E   T E S T S                                               ###
+##############################################################################
+##############################################################################
+# prepare for test
+COPY_TESTFILES_TO_TESTDIR
+
+TOOLTEST_HELP h5dump-help.txt -h
+
+# test data output redirection
+TOOLTEST tnoddl.ddl --enable-error-stack --ddl -y packedbits.h5
+TOOLTEST tnodata.ddl --enable-error-stack --output packedbits.h5
+TOOLTEST tnoattrddl.ddl --enable-error-stack -O -y tattr.h5
+TOOLTEST tnoattrdata.ddl --enable-error-stack -A -o tattr.h5
+TOOLTEST2 trawdatafile.exp --enable-error-stack -y -o trawdatafile.txt packedbits.h5
+TOOLTEST2 tnoddlfile.exp --enable-error-stack -O -y -o tnoddlfile.txt packedbits.h5
+TOOLTEST2A twithddlfile.exp twithddl.exp --enable-error-stack --ddl=twithddl.txt -y -o twithddlfile.txt packedbits.h5
+TOOLTEST2 trawssetfile.exp --enable-error-stack -d "/dset1[1,1;;;]" -y -o trawssetfile.txt tdset.h5
+
+# test for maximum display datasets
+TOOLTEST twidedisplay.ddl --enable-error-stack -w0 packedbits.h5
+
+# test for signed/unsigned datasets
+TOOLTEST packedbits.ddl --enable-error-stack packedbits.h5
+# test for compound signed/unsigned datasets
+TOOLTEST tcmpdintsize.ddl --enable-error-stack tcmpdintsize.h5
+# test for signed/unsigned scalar datasets
+TOOLTEST tscalarintsize.ddl --enable-error-stack tscalarintsize.h5
+# test for signed/unsigned attributes
+TOOLTEST tattrintsize.ddl --enable-error-stack tattrintsize.h5
+# test for compound signed/unsigned attributes
+TOOLTEST tcmpdattrintsize.ddl --enable-error-stack tcmpdattrintsize.h5
+# test for signed/unsigned scalar attributes
+TOOLTEST tscalarattrintsize.ddl --enable-error-stack tscalarattrintsize.h5
+# test for signed/unsigned scalar datasets with attributes
+TOOLTEST tscalarintattrsize.ddl --enable-error-stack tscalarintattrsize.h5
+# test for signed/unsigned datasets attributes
+TOOLTEST tintsattrs.ddl --enable-error-stack tintsattrs.h5
+# test for string scalar dataset attribute
+TOOLTEST tscalarstring.ddl --enable-error-stack tscalarstring.h5
+# test for displaying groups
+TOOLTEST tgroup-1.ddl --enable-error-stack tgroup.h5
+# test for displaying the selected groups
+TOOLTEST4 tgroup-2.ddl --enable-error-stack --group=/g2 --group / -g /y tgroup.h5
+
+# test for displaying simple space datasets
+TOOLTEST tdset-1.ddl --enable-error-stack tdset.h5
+# test for displaying selected datasets
+TOOLTEST4 tdset-2.ddl --enable-error-stack -H -d dset1 -d /dset2 --dataset=dset3 tdset.h5
+
+# test for displaying attributes
+TOOLTEST tattr-1.ddl --enable-error-stack tattr.h5
+# test for displaying the selected attributes of string type and scalar space
+TOOLTEST tattr-2.ddl --enable-error-stack -a "/\/attr1" --attribute /attr4 --attribute=/attr5 tattr.h5
+TOOLTEST tattr-2.ddl --enable-error-stack -N "/\/attr1" --any_path /attr4 --any_path=/attr5 tattr.h5
+# test for header and error messages
+TOOLTEST4 tattr-3.ddl --enable-error-stack --header -a /attr2 --attribute=/attr tattr.h5
+# test for displaying at least 9 attributes on root from a BE machine
+TOOLTEST tattr-4_be.ddl --enable-error-stack tattr4_be.h5
+# test for displaying attributes in shared datatype (also in group and dataset)
+TOOLTEST tnamed_dtype_attr.ddl --enable-error-stack tnamed_dtype_attr.h5
+
+# test for displaying soft links and user-defined links
+TOOLTEST tslink-1.ddl --enable-error-stack tslink.h5
+TOOLTEST tudlink-1.ddl --enable-error-stack tudlink.h5
+# test for displaying the selected link
+TOOLTEST tslink-2.ddl --enable-error-stack -l slink2 tslink.h5
+TOOLTEST tslink-2.ddl --enable-error-stack -N slink2 tslink.h5
+TOOLTEST tudlink-2.ddl --enable-error-stack -l udlink2 tudlink.h5
+# test for displaying dangling soft links
+TOOLTEST4 tslink-D.ddl --enable-error-stack -d /slink1 tslink.h5
+
+# tests for hard links
+TOOLTEST thlink-1.ddl --enable-error-stack thlink.h5
+TOOLTEST thlink-2.ddl --enable-error-stack -d /g1/dset2 --dataset /dset1 --dataset=/g1/g1.1/dset3 thlink.h5
+TOOLTEST thlink-3.ddl --enable-error-stack -d /g1/g1.1/dset3 --dataset /g1/dset2 --dataset=/dset1 thlink.h5
+TOOLTEST thlink-4.ddl --enable-error-stack -g /g1 thlink.h5
+TOOLTEST thlink-4.ddl --enable-error-stack -N /g1 thlink.h5
+TOOLTEST thlink-5.ddl --enable-error-stack -d /dset1 -g /g2 -d /g1/dset2 thlink.h5
+TOOLTEST thlink-5.ddl --enable-error-stack -N /dset1 -N /g2 -N /g1/dset2 thlink.h5
+
+# tests for compound data types
+TOOLTEST tcomp-1.ddl --enable-error-stack tcompound.h5
+# test for named data types
+TOOLTEST tcomp-2.ddl --enable-error-stack -t /type1 --datatype /type2 --datatype=/group1/type3 tcompound.h5
+TOOLTEST tcomp-2.ddl --enable-error-stack -N /type1 --any_path /type2 --any_path=/group1/type3 tcompound.h5
+# test for unamed type
+TOOLTEST4 tcomp-3.ddl --enable-error-stack -t /#6632 -g /group2 tcompound.h5
+# test complicated compound datatype
+TOOLTEST tcomp-4.ddl --enable-error-stack tcompound_complex.h5
+TOOLTEST tcompound_complex.ddl --enable-error-stack tcompound_complex2.h5
+# tests for bitfields and opaque data types
+TOOLTEST tbitnopaque.ddl --enable-error-stack tbitnopaque.h5
+
+#test for the nested compound type
+TOOLTEST tnestcomp-1.ddl --enable-error-stack tnestedcomp.h5
+TOOLTEST tnestedcmpddt.ddl --enable-error-stack tnestedcmpddt.h5
+
+# test for options
+TOOLTEST4 tall-1.ddl --enable-error-stack tall.h5
+TOOLTEST tall-2.ddl --enable-error-stack --header -g /g1/g1.1 -a attr2 tall.h5
+TOOLTEST tall-3.ddl --enable-error-stack -d /g2/dset2.1 -l /g1/g1.2/g1.2.1/slink tall.h5
+TOOLTEST tall-3.ddl --enable-error-stack -N /g2/dset2.1 -N /g1/g1.2/g1.2.1/slink tall.h5
+TOOLTEST tall-7.ddl --enable-error-stack -a attr1 tall.h5
+TOOLTEST tall-7N.ddl --enable-error-stack -N attr1 tall.h5
+
+# test for loop detection
+TOOLTEST tloop-1.ddl --enable-error-stack tloop.h5
+
+# test for string
+TOOLTEST tstr-1.ddl --enable-error-stack tstr.h5
+TOOLTEST tstr-2.ddl --enable-error-stack tstr2.h5
+
+# test for file created by Lib SAF team
+TOOLTEST tsaf.ddl --enable-error-stack tsaf.h5
+
+# test for file with variable length data
+TOOLTEST tvldtypes1.ddl --enable-error-stack tvldtypes1.h5
+TOOLTEST tvldtypes2.ddl --enable-error-stack tvldtypes2.h5
+TOOLTEST tvldtypes3.ddl --enable-error-stack tvldtypes3.h5
+TOOLTEST tvldtypes4.ddl --enable-error-stack tvldtypes4.h5
+TOOLTEST tvldtypes5.ddl --enable-error-stack tvldtypes5.h5
+
+#test for file with variable length string data
+TOOLTEST tvlstr.ddl --enable-error-stack tvlstr.h5
+TOOLTEST tvlenstr_array.ddl --enable-error-stack tvlenstr_array.h5
+
+# test for files with array data
+TOOLTEST tarray1.ddl --enable-error-stack tarray1.h5
+# # added for bug# 2092 - tarray1_big.h
+TOOLTEST4 tarray1_big.ddl --enable-error-stack -R tarray1_big.h5
+TOOLTEST tarray2.ddl --enable-error-stack tarray2.h5
+TOOLTEST tarray3.ddl --enable-error-stack tarray3.h5
+TOOLTEST tarray4.ddl --enable-error-stack tarray4.h5
+TOOLTEST tarray5.ddl --enable-error-stack tarray5.h5
+TOOLTEST tarray6.ddl --enable-error-stack tarray6.h5
+TOOLTEST tarray7.ddl --enable-error-stack tarray7.h5
+TOOLTEST tarray8.ddl --enable-error-stack tarray8.h5
+
+# test for wildcards in filename (does not work with cmake)
+# inconsistent across platforms TOOLTEST3 tstarfile.ddl --enable-error-stack -H -d Dataset1 tarr*.h5
+#TOOLTEST4 tqmarkfile.ddl --enable-error-stack -H -d Dataset1 tarray?.h5
+TOOLTEST tmultifile.ddl --enable-error-stack -H -d Dataset1 tarray2.h5 tarray3.h5 tarray4.h5 tarray5.h5 tarray6.h5 tarray7.h5
+
+# test for files with empty data
+TOOLTEST tempty.ddl --enable-error-stack tempty.h5
+
+# test for files with groups that have comments
+TOOLTEST tgrp_comments.ddl --enable-error-stack tgrp_comments.h5
+
+# test the --filedriver flag
+TOOLTEST tsplit_file.ddl --enable-error-stack --filedriver=split tsplit_file
+TOOLTEST tfamily.ddl --enable-error-stack --filedriver=family tfamily%05d.h5
+TOOLTEST tmulti.ddl --enable-error-stack --filedriver=multi tmulti
+
+# test for files with group names which reach > 1024 bytes in size
+TOOLTEST tlarge_objname.ddl --enable-error-stack -w157 tlarge_objname.h5
+
+# test '-A' to suppress data but print attr's
+TOOLTEST4 tall-2A.ddl --enable-error-stack -A tall.h5
+
+# test '-A' to suppress attr's but print data
+TOOLTEST4 tall-2A0.ddl --enable-error-stack -A 0 tall.h5
+
+# test '-r' to print attributes in ASCII instead of decimal
+TOOLTEST4 tall-2B.ddl --enable-error-stack -A -r tall.h5
+
+# test Subsetting
+TOOLTEST tall-4s.ddl --enable-error-stack --dataset=/g1/g1.1/dset1.1.1 --start=1,1 --stride=2,3 --count=3,2 --block=1,1 tall.h5
+TOOLTEST tall-5s.ddl --enable-error-stack -d "/g1/g1.1/dset1.1.2[0;2;10;]" tall.h5
+TOOLTEST tdset-3s.ddl --enable-error-stack -d "/dset1[1,1;;;]" tdset.h5
+TOOLTEST tno-subset.ddl --enable-error-stack --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5
+
+TOOLTEST tints4dimsCount2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -c 2,2,2,2 tints4dims.h5
+TOOLTEST tints4dimsBlock2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -c 1,1,1,1 -k 2,2,2,2 tints4dims.h5
+TOOLTEST tints4dimsStride2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,2,2 -c 2,2,2,2 tints4dims.h5
+TOOLTEST tints4dimsCountEq.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,1,1 -k 1,2,1,1 -c 2,2,4,4 tints4dims.h5
+TOOLTEST tints4dimsBlockEq.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,1,1 -c 2,2,1,1 -k 1,2,4,4 tints4dims.h5
+
+# test printing characters in ASCII instead of decimal
+TOOLTEST tchar1.ddl --enable-error-stack -r tchar.h5
+
+# test datatypes in ASCII and UTF8
+TOOLTEST charsets.ddl --enable-error-stack charsets.h5
+
+# rev. 2004
+
+# tests for super block
+TOOLTEST tboot1.ddl --enable-error-stack -H -B -d dset tfcontents1.h5
+TOOLTEST tboot2.ddl --enable-error-stack -B tfcontents2.h5
+TOOLTEST tboot2A.ddl --enable-error-stack --boot-block tfcontents2.h5
+TOOLTEST tboot2B.ddl --enable-error-stack --superblock tfcontents2.h5
+TOOLTEST file_space.ddl --enable-error-stack -B file_space.h5
+
+# test -p with a non existing dataset
+TOOLTEST4 tperror.ddl --enable-error-stack -p -d bogus tfcontents1.h5
+
+# test for file contents
+TOOLTEST tcontents.ddl --enable-error-stack -n tfcontents1.h5
+TOOLTEST tordercontents1.ddl --enable-error-stack -n --sort_by=name --sort_order=ascending tfcontents1.h5
+TOOLTEST tordercontents2.ddl --enable-error-stack -n --sort_by=name --sort_order=descending tfcontents1.h5
+TOOLTEST tattrcontents1.ddl --enable-error-stack -n 1 --sort_order=ascending tall.h5
+TOOLTEST tattrcontents2.ddl --enable-error-stack -n 1 --sort_order=descending tall.h5
+
+# tests for storage layout
+# compact
+TOOLTEST tcompact.ddl --enable-error-stack -H -p -d compact tfilters.h5
+# contiguous
+TOOLTEST tcontiguos.ddl --enable-error-stack -H -p -d contiguous tfilters.h5
+# chunked
+TOOLTEST tchunked.ddl --enable-error-stack -H -p -d chunked tfilters.h5
+# external
+TOOLTEST texternal.ddl --enable-error-stack -H -p -d external tfilters.h5
+
+# fill values
+TOOLTEST tfill.ddl --enable-error-stack -p tfvalues.h5
+
+# several datatype, with references , print path
+TOOLTEST treference.ddl --enable-error-stack tattr2.h5
+
+# escape/not escape non printable characters
+TOOLTEST tstringe.ddl --enable-error-stack -e tstr3.h5
+TOOLTEST tstring.ddl --enable-error-stack tstr3.h5
+# char data as ASCII with non escape
+TOOLTEST tstring2.ddl --enable-error-stack -r -d str4 tstr3.h5
+
+# array indices print/not print
+TOOLTEST tindicesyes.ddl --enable-error-stack taindices.h5
+TOOLTEST tindicesno.ddl --enable-error-stack -y taindices.h5
+
+########## array indices with subsetting
+# 1D case
+TOOLTEST tindicessub1.ddl --enable-error-stack -d 1d -s 1 -S 10 -c 2  -k 3 taindices.h5
+
+# 2D case
+TOOLTEST tindicessub2.ddl --enable-error-stack -d 2d -s 1,2  -S 3,3 -c 3,2 -k 2,2 taindices.h5
+
+# 3D case
+TOOLTEST tindicessub3.ddl --enable-error-stack -d 3d -s 0,1,2 -S 1,3,3 -c 2,2,2  -k 1,2,2  taindices.h5
+
+# 4D case
+TOOLTEST tindicessub4.ddl --enable-error-stack -d 4d -s 0,0,1,2  -c 2,2,3,2 -S 1,1,3,3 -k 1,1,2,2  taindices.h5
+
+#Exceed the dimensions for subsetting
+TOOLTEST texceedsubstart.ddl --enable-error-stack -d 1d -s 1,3 taindices.h5
+TOOLTEST texceedsubcount.ddl --enable-error-stack -d 1d -c 1,3 taindices.h5
+TOOLTEST texceedsubstride.ddl --enable-error-stack -d 1d -S 1,3 taindices.h5
+TOOLTEST texceedsubblock.ddl --enable-error-stack -d 1d -k 1,3 taindices.h5
+
+
+# tests for filters
+# SZIP
+TOOLTEST tszip.ddl --enable-error-stack -H -p -d szip tfilters.h5
+# deflate
+TOOLTEST tdeflate.ddl --enable-error-stack -H -p -d deflate tfilters.h5
+# shuffle
+TOOLTEST tshuffle.ddl --enable-error-stack -H -p -d shuffle tfilters.h5
+# fletcher32
+TOOLTEST tfletcher32.ddl --enable-error-stack -H -p -d fletcher32  tfilters.h5
+# nbit
+TOOLTEST tnbit.ddl --enable-error-stack -H -p -d nbit  tfilters.h5
+# scaleoffset
+TOOLTEST tscaleoffset.ddl --enable-error-stack -H -p -d scaleoffset  tfilters.h5
+# all
+TOOLTEST tallfilters.ddl --enable-error-stack -H -p -d all  tfilters.h5
+# user defined
+TOOLTEST tuserfilter.ddl --enable-error-stack -H  -p -d myfilter  tfilters.h5
+
+if test $USE_FILTER_DEFLATE = "yes" ; then
+  # data read internal filters
+  TOOLTEST treadintfilter.ddl --enable-error-stack -d deflate -d shuffle -d fletcher32 -d nbit -d scaleoffset tfilters.h5
+  if test $USE_FILTER_SZIP = "yes"; then
+    # data read
+    TOOLTEST treadfilter.ddl --enable-error-stack -d all -d szip tfilters.h5
+  fi
+fi
+
+# test for displaying objects with very long names
+TOOLTEST tlonglinks.ddl --enable-error-stack tlonglinks.h5
+
+# dimensions over 4GB, print boundary
+TOOLTEST tbigdims.ddl --enable-error-stack -d dset4gb -s 4294967284 -c 22 tbigdims.h5
+
+# hyperslab read
+TOOLTEST thyperslab.ddl --enable-error-stack thyperslab.h5
+
+
+#
+
+# test for displaying dataset and attribute of null space
+TOOLTEST tnullspace.ddl --enable-error-stack tnullspace.h5
+
+# test for displaying dataset and attribute of space with 0 dimension size
+TOOLTEST zerodim.ddl --enable-error-stack zerodim.h5
+
+# test for long double (some systems do not have long double)
+#TOOLTEST tldouble.ddl --enable-error-stack tldouble.h5
+
+# test for vms
+TOOLTEST tvms.ddl --enable-error-stack tvms.h5
+
+# test for binary output
+TOOLTEST tbin1.ddl --enable-error-stack -d integer -o out1.bin -b LE tbinary.h5
+
+# test for string binary output
+TOOLTEST2B tstr2bin2.exp --enable-error-stack -d /g2/dset2 -b -o tstr2bin2.txt tstr2.h5
+TOOLTEST2B tstr2bin6.exp --enable-error-stack -d /g6/dset6 -b -o tstr2bin6.txt tstr2.h5
+
+# NATIVE default. the NATIVE test can be validated with h5import/h5diff
+TOOLTEST   tbin1.ddl --enable-error-stack -d integer -o out1.bin  -b  tbinary.h5
+IMPORTTEST out1.bin -c out3.h5import -o out1.h5
+DIFFTEST   tbinary.h5 out1.h5 /integer /integer
+# Same but use h5dump as input to h5import
+IMPORTTEST out1.bin -c tbin1.ddl -o out1D.h5
+DIFFTEST   tbinary.h5 out1D.h5 /integer /integer
+
+TOOLTEST   tbin2.ddl --enable-error-stack -b BE -d float  -o out2.bin  tbinary.h5
+
+# the NATIVE test can be validated with h5import/h5diff
+TOOLTEST   tbin3.ddl --enable-error-stack -d integer -o out3.bin -b NATIVE tbinary.h5
+IMPORTTEST out3.bin -c out3.h5import -o out3.h5
+DIFFTEST   tbinary.h5 out3.h5 /integer /integer
+# Same but use h5dump as input to h5import
+IMPORTTEST out3.bin -c tbin3.ddl -o out3D.h5
+DIFFTEST   tbinary.h5 out3D.h5 /integer /integer
+
+TOOLTEST   tbin4.ddl --enable-error-stack -d double  -b FILE -o out4.bin    tbinary.h5
+
+# Clean up binary output files
+if test -z "$HDF5_NOCLEANUP"; then
+ rm -f out[1-4].bin
+ rm -f out1.h5
+ rm -f out3.h5
+fi
+
+# test for dataset region references
+TOOLTEST  tdatareg.ddl --enable-error-stack tdatareg.h5
+TOOLTEST4 tdataregR.ddl --enable-error-stack -R tdatareg.h5
+TOOLTEST  tattrreg.ddl --enable-error-stack tattrreg.h5
+TOOLTEST4 tattrregR.ddl --enable-error-stack -R tattrreg.h5
+TOOLTEST2 tbinregR.exp --enable-error-stack -d /Dataset1 -s 0 -R -y -o tbinregR.txt    tdatareg.h5
+
+# Clean up text output files
+if test -z "$HDF5_NOCLEANUP"; then
+ rm -f tbinregR.txt
+fi
+
+# tests for group creation order
+# "1" tracked, "2" name, root tracked
+TOOLTEST tordergr1.ddl --enable-error-stack --group=1 --sort_by=creation_order --sort_order=ascending tordergr.h5
+TOOLTEST tordergr2.ddl --enable-error-stack --group=1 --sort_by=creation_order --sort_order=descending tordergr.h5
+TOOLTEST tordergr3.ddl --enable-error-stack -g 2 -q name -z ascending tordergr.h5
+TOOLTEST tordergr4.ddl --enable-error-stack -g 2 -q name -z descending tordergr.h5
+TOOLTEST tordergr5.ddl --enable-error-stack -q creation_order tordergr.h5
+
+# tests for attribute order
+TOOLTEST torderattr1.ddl --enable-error-stack -H --sort_by=name --sort_order=ascending torderattr.h5
+TOOLTEST torderattr2.ddl --enable-error-stack -H --sort_by=name --sort_order=descending torderattr.h5
+TOOLTEST torderattr3.ddl --enable-error-stack -H --sort_by=creation_order --sort_order=ascending torderattr.h5
+TOOLTEST torderattr4.ddl --enable-error-stack -H --sort_by=creation_order --sort_order=descending torderattr.h5
+
+# tests for link references and order
+TOOLTEST4 torderlinks1.ddl --enable-error-stack --sort_by=name --sort_order=ascending tfcontents1.h5
+TOOLTEST4 torderlinks2.ddl --enable-error-stack --sort_by=name --sort_order=descending tfcontents1.h5
+
+# tests for floating point user defined printf format
+TOOLTEST tfpformat.ddl --enable-error-stack -m %.7f tfpformat.h5
+
+# tests for traversal of external links
+TOOLTEST4 textlinksrc.ddl --enable-error-stack textlinksrc.h5
+TOOLTEST4 textlinkfar.ddl --enable-error-stack textlinkfar.h5
+
+# test for dangling external links
+TOOLTEST4 textlink.ddl --enable-error-stack textlink.h5
+
+# test for error stack display (BZ2048)
+TOOLTEST5 filter_fail.ddl --enable-error-stack filter_fail.h5
+
+# test for -o -y for dataset with attributes
+TOOLTEST2 tall-6.exp --enable-error-stack -y -o tall-6.txt -d /g1/g1.1/dset1.1.1 tall.h5
+
+# test for non-existing file
+TOOLTEST3 non_existing.ddl --enable-error-stack tgroup.h5 non_existing.h5
+
+# Clean up temporary files/directories
+CLEAN_TESTFILES_AND_TESTDIR
+
+# Report test results and exit
+if test $nerrors -eq 0 ; then
+    echo "All $TESTNAME tests passed."
+    exit $EXIT_SUCCESS
+else
+    echo "$TESTNAME tests failed with $nerrors errors."
+    exit $EXIT_FAILURE
+fi