[svn-r3266] Purpose:

    Name change
Description:
    Changed the names of the testh5toh4 and testh4toh5 scripts to the
    "canonical" form -- testh4toh5.sh and testh5toh4.sh.
Platforms tested:
    Linux

1 files changed, 0 insertions, 273 deletions

diff --git a/tools/testh4toh5 b/tools/testh4toh5
deleted file mode 100644
index 1918851..0000000
--- a/tools/testh4toh5
+++ /dev/null
@@ -1,273 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 1997 National Center for Supercomputing Applications.
-#                    All rights reserved.
-#
-# Test script for the h4toh5 tests.
-# Using the h4toh5 convert to convert a pre-created hdf file to
-# an hdf5 file (output file), then compare it with a pre-created
-# corresponding hdf5 file (expected file).
-# If the same, that particular test passes.
-# If not the same, the output file and expected file are processed
-# by the h5dump tool to see if they produce the same results.
-# If the same, the test passes.
-# If not, show the difference of the two results and report the test failed.
-#
-# h5dump is default to use the one just built.  It can be overridden
-# by setting $H5DUMP to a different value such as /usr/local/bin/h5dump.
-
-h4toh5=h4toh5		# a relative name
-
-COMMAND=`pwd`/"$h4toh5"	# an absolute command name
-
-cmp='cmp -s'
-diff='diff -c'
-
-RM='rm -f'
-SED='sed '
-H5DUMP=${H5DUMP:-`pwd`/'h5dump'}	# Default to use the h5dumper
-					# in the same tools directory
-
-# Verify if $H5DUMP is a valid command.
-tmpfile=/tmp/testh4toh5.$$
-$H5DUMP -V > $tmpfile
-if [ ! -s $tmpfile ]; then
-    echo "    Could not run the '$H5DUMP' command.  The test can still proceed"
-    echo "    but it may fail if '$H5DUMP' is needed to verify the output."
-    echo "    You can make sure '$H5DUMP' is among your shell PATH and run"
-    echo "    the test again.  You may also visit http://hdf.ncsa.uiuc.edu"
-    echo "    or email hdfhelp@ncsa.uiuc.edu for more information."
-    H5DUMP=:
-fi
-$RM $tmpfile
-
-# The build (current) directory might be different than the source directory.
-if test "X$srcdir" = X; then
-    srcdir=.
-fi
-mkdir testfiles >/dev/null 2>&1
-
-SRCDIR="$srcdir/testfiles"
-OUTDIR="./testfiles/Results"
-
-test -d "$OUTDIR" || mkdir $OUTDIR
-
-nerrors=0
-verbose=yes
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-TESTING()
-{
-    SPACES="                                                               "
-    echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
-}
-
-# Run a test and print PASS or *FAIL*.  If a test fails then increment
-# the `nerrors' global variable and (if $verbose is set) display the
-# difference between the actual and the expected hdf4 files. The
-# expected hdf5 files are in testfiles/Expected directory.
-# The actual hdf5 file is not removed if $HDF5_NOCLEANUP is to a non-null
-# value.
-CONVERT()
-{
-    # Run h4toh5 convert.
-    TESTING $h4toh5 $@
-
-    #
-    # Set up arguments to run the conversion test.
-    # The converter assumes all hdf4 files has the .hdf suffix as in the form
-    # of foo.hdf.  It creates the corresponding hdf5 files with the .h5 suffix
-    # as in the form of foo.h5.  One exception is that if exactly two file
-    # names are given, it treats the first argument as an hdf4 file and creates
-    # the corresponding hdf5 file with the name as the second argument, WITOUT
-    # any consideration of the suffix.  (For this test script, in order to
-    # match the output hdf5 file with the expected hdf5 file, it expects the
-    # second file of the two-files tests has the .h5 suffix too.)
-    #
-    # If SRCDIR != OUTDIR, need to copy the input hdf4 files from the SRCDIR
-    # to the OUTDIR and transform the input file pathname because of the suffix
-    # convention mentioned above.  This way, the hdf5 files are always created
-    # in the OUTDIR directory.
-    #
-
-    INFILES=""
-    OUTFILES=""
-    MULTIRUN=""
-
-    case "$1" in
-    "-m")		# multiple files conversion
-	MULTIRUN="-m"
-	shift
-	for f in $*
-	do
-	    if test "$SRCDIR" != "$OUTDIR"; then
-		cp $SRCDIR/$f $OUTDIR/$f
-	    fi
-	    INFILES="$INFILES $f"
-	    OUTFILES="$OUTFILES `basename $f .hdf`.h5"
-	    shift
-	done
-	;;
-    * )			# Single file conversion
-	case $# in
-	1)  if test "$SRCDIR" != "$OUTDIR"; then
-		cp $SRCDIR/$1 $OUTDIR/$1
-	    fi
-	    INFILES="$1"
-	    OUTFILES="`basename $1 .hdf`.h5"
-	    ;;
-	2) 		# hdf4 file specified
-	    if test "$SRCDIR" != "$OUTDIR"; then
-		cp $SRCDIR/$1 $OUTDIR/$1
-	    fi
-	    INFILES="$1"
-	    OUTFILES="$2"
-	    ;;
-	*)		# Illegal
-	    echo "Illegal arguments"
-	    exit 1
-	    ;;
-	esac
-	;;
-    esac
-
-    # run the conversion and remove input files that have been copied over
-    (
-	cd $OUTDIR
-	$COMMAND $INFILES $OUTFILES 2>/dev/null
-	if test "$SRCDIR" != "$OUTDIR"; then
-	    $RM $INFILES
-	fi
-    )
-
-    # Verify results
-    result="passed"
-    for f in $OUTFILES
-    do
-	if $cmp $SRCDIR/Expected/$f $OUTDIR/$f
-	then
-	    :
-	else
-	    # Use h5dump to dump the files and verify the output.
-	    outfile=`basename $f .h5`
-	    expect_out=$outfile.expect
-	    actual_out=$outfile.actual
-
-	    (cd $SRCDIR/Expected
-	    $H5DUMP $outfile.h5 ) > $expect_out
-	    (cd $OUTDIR
-	    $H5DUMP $outfile.h5 ) > $actual_out
-
-	    if [ "passed" = $result -a ! -s $actual_out ] ; then
-		echo "*FAILED*"
-		nerrors="`expr $nerrors + 1`"
-		result=failed
-		test yes = "$verbose" &&
-		echo "    H5DUMP failed to produce valid output"
-	    elif $cmp $expect_out $actual_out; then
-		:
-	    else
-		if test "passed" = $result; then
-		    echo "*FAILED*"
-		    nerrors="`expr $nerrors + 1`"
-		    result=failed
-		fi
-		test yes = "$verbose" &&
-		echo "    Actual result (*.actual) differs from expected result (*.expect)" &&
-		$diff $expect_out $actual_out |sed 's/^/    /'
-	    fi
-	fi
-
-	# Clean up output file
-	if test -z "$HDF5_NOCLEANUP"; then
-	    $RM $expect_out $actual_out
-	    $RM $OUTDIR/$f
-	fi
-    done
-    if test "passed" = "$result"; then
-	    echo " PASSED"
-    fi
-}
-
-##############################################################################
-##############################################################################
-###			  T H E   T E S T S                                ###
-##############################################################################
-##############################################################################
-
-$RM $OUTDIR/*.hdf $OUTDIR/*.tmp
-
-#
-# The HDF5 filenames are created based upon the HDF4 filenames
-# without the extension.
-#
-
-# test for converting H5 groups to H4 Vgroups.
-#CONVERT vg.hdf
-
-
-#
-# The test for conversion are the same as above with the only difference
-# being that the HDF5 filenames are given explicitly.
-#
-
-$RM $OUTDIR/*.tmp
-CONVERT vg.hdf vg.h5
-CONVERT anfile.hdf anfile.h5
-CONVERT anno_obj.hdf anno_obj.h5
-CONVERT image_attr.hdf image_attr.h5
-#CONVERT image_maxsize.hdf image_maxsize.h5
-CONVERT image_pal.hdf image_pal.h5
-CONVERT image_uint16.hdf image_uint16.h5
-CONVERT image_uint161.hdf image_uint161.h5
-CONVERT image_uint32.hdf image_uint32.h5
-CONVERT image_uint321.hdf image_uint321.h5
-CONVERT image_uint8.hdf image_uint8.h5
-CONVERT image_uint81.hdf image_uint81.h5
-CONVERT sds_dimsca_data.hdf sds_dimsca_data.h5
-CONVERT sds_dimscaunl_data.hdf sds_dimscaunl_data.h5
-#CONVERT sds_maxdim.hdf sds_maxdim.h5
-#CONVERT sds_maxdimsizedata.hdf sds_maxdimsizedata.h5
-CONVERT sds_typattr.hdf sds_typattr.h5
-CONVERT sds_typchar8.hdf sds_typchar8.h5
-CONVERT sds_typchunk_comp.hdf sds_typchunk_comp.h5
-CONVERT sds_typfloat32.hdf sds_typfloat32.h5
-CONVERT sds_typfloat64.hdf sds_typfloat64.h5
-CONVERT sds_typnfloat32.hdf sds_typnfloat32.h5
-CONVERT sds_typnfloat64.hdf sds_typnfloat64.h5
-CONVERT sds_typint16.hdf sds_typint16.h5
-CONVERT sds_typint32.hdf sds_typint32.h5
-CONVERT sds_typint8.hdf sds_typint8.h5
-CONVERT sds_typlint16.hdf sds_typlint16.h5
-CONVERT sds_typlint32.hdf sds_typlint32.h5
-CONVERT sds_typlint8.hdf sds_typlint8.h5
-CONVERT sds_typluint16.hdf sds_typluint16.h5
-CONVERT sds_typluint32.hdf sds_typluint32.h5
-CONVERT sds_typluint8.hdf sds_typluint8.h5
-CONVERT sds_typuint16.hdf sds_typuint16.h5
-CONVERT sds_typuint32.hdf sds_typuint32.h5
-CONVERT sds_typuint8.hdf sds_typuint8.h5
-CONVERT vdata_attrtest.hdf vdata_attrtest.h5
-CONVERT vdata_typtest.hdf vdata_typtest.h5
-CONVERT vg_attrtest.hdf vg_attrtest.h5
-CONVERT vg_hl.hdf vg_hl.h5
-CONVERT vg_loop.hdf vg_loop.h5
-CONVERT vg_nameclash.hdf vg_nameclash.h5
-CONVERT vg_nameclash2.hdf vg_nameclash2.h5
-CONVERT vg_simple.hdf vg_simple.h5
-
-#
-# Again, the test for conversion are the same as the first set of test.
-# Here, multiple conversion are done on HDF4 files at one time.
-#
-
-$RM $OUTDIR/*.hdf $OUTDIR/*.tmp
-#CONVERT -m vg.hdf
-
-if test $nerrors -eq 0 ; then
-	echo "All h4toh5 tests passed."
-fi
-
-$RM -r $OUTDIR
-exit $nerrors