[svn-r3266] Purpose:

    Name change
Description:
    Changed the names of the testh5toh4 and testh4toh5 scripts to the
    "canonical" form -- testh4toh5.sh and testh5toh4.sh.
Platforms tested:
    Linux

1 files changed, 0 insertions, 301 deletions

diff --git a/tools/testh5toh4 b/tools/testh5toh4
deleted file mode 100644
index 7e4e0f2..0000000
--- a/tools/testh5toh4
+++ /dev/null
@@ -1,301 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 1997 National Center for Supercomputing Applications.
-#                    All rights reserved.
-#
-
-h5toh4=h5toh4		# a relative name
-COMMAND=`pwd`/"$h5toh4"	# an absolute command path
-
-cmp='cmp -s'
-diff='diff -c'
-
-RM='rm -f'
-SED='sed '
-H4DUMP='hdp'
-
-# Verify if $H4DUMP is a valid command.
-tmpfile=/tmp/testh5toh4.$$
-$H4DUMP -H > $tmpfile
-if test -s "$tmpfile"; then
-    # Find out which version of hdp is being used.  Over simplified
-    # algorithm but will do the job for now.
-    if ( grep -s 'NCSA HDF Version 4.1 Release [3-9]' $tmpfile > /dev/null )
-    then
-	H4DUMPVER=413
-    else
-	H4DUMPVER=0
-	echo "    Some tests maybe skipped because your version of $H4DUMP does"
-	echo "    not handle loops in Vgroups correctly.  You need version"
-	echo "    4.1 Release 3 or later.  Visit http://hdf.ncsa.uiuc.edu"
-	echo "    or email hdfhelp@ncsa.uiuc.edu for more information."
-    fi
-else
-    echo "    Could not run the '$H4DUMP' command.  The test can still proceed"
-    echo "    but it may fail if '$H4DUMP' is needed to verify the output."
-    echo "    You can make sure '$H4DUMP' is among your shell PATH and run"
-    echo "    the test again.  You may also visit http://hdf.ncsa.uiuc.edu"
-    echo "    or email hdfhelp@ncsa.uiuc.edu for more information."
-    H4DUMP=:
-    H4DUMPVER=0
-fi
-$RM $tmpfile
-
-# The build (current) directory might be different than the source directory.
-if test -z "$srcdir"; then
-   srcdir=.
-fi
-mkdir testfiles >/dev/null 2>&1
-
-SRCDIR="$srcdir/testfiles"
-OUTDIR="./testfiles/Results"
-
-test -d $OUTDIR || mkdir $OUTDIR
-
-nerrors=0
-verbose=yes
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-TESTING()
-{
-    SPACES="                                                               "
-    echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
-}
-
-# Run a test and print PASS or *FAIL*.  If a test fails then increment
-# the `nerrors' global variable and (if $verbose is set) display the
-# difference between the actual and the expected hdf4 files. The
-# expected hdf4 files are in testfiles/Expected directory.
-# The actual hdf4 file is not removed if $HDF5_NOCLEANUP is to a non-null
-# value.
-CONVERT()
-{
-    # Run h5toh4 convert.
-    TESTING $h5toh4 $@
-
-    #
-    # Set up arguments to run the conversion test.
-    # The converter assumes all hdf5 files has the .h5 suffix as in the form
-    # of foo.h5.  It creates the corresponding hdf4 files with the .hdf suffix
-    # as in the form of foo.hdf.  One exception is that if exactly two file
-    # names are given, it treats the first argument as an hdf5 file and creates
-    # the corresponding hdf4 file with the name as the second argument, WITOUT
-    # any consideration of the suffix.  (For this test script, in order to
-    # match the output hdf4 file with the expected hdf4 file, it expects the
-    # second file of the two-files tests has the .hdf suffix too.)
-    #
-    # If SRCDIR != OUTDIR, need to copy the input hdf5 files from the SRCDIR
-    # to the OUTDIR and transform the input file pathname because of the suffix
-    # convention mentioned above.  This way, the hdf4 files are always created
-    # in the OUTDIR directory.
-    #
-
-    INFILES=""
-    OUTFILES=""
-    MULTIRUN=""
-
-    case "$1" in
-    "-m")		# multiple files conversion
-	MULTIRUN="-m"
-	shift
-	for f in $*
-	do
-	    if test "$SRCDIR" != "$OUTDIR"; then
-		cp $SRCDIR/$f $OUTDIR/$f
-	    fi
-	    INFILES="$INFILES $f"
-	    OUTFILES="$OUTFILES `basename $f .h5`.hdf"
-	    shift
-	done
-	;;
-    * )			# Single file conversion
-	case $# in
-	1)  if test "$SRCDIR" != "$OUTDIR"; then
-		cp $SRCDIR/$1 $OUTDIR/$1
-	    fi
-	    INFILES="$1"
-	    OUTFILES="`basename $1 .h5`.hdf"
-	    ;;
-	2) 		# hdf4 file specified
-	    if test "$SRCDIR" != "$OUTDIR"; then
-		cp $SRCDIR/$1 $OUTDIR/$1
-	    fi
-	    INFILES="$1"
-	    OUTFILES="$2"
-	    ;;
-	*)		# Illegal
-	    echo "Illegal arguments"
-	    exit 1
-	    ;;
-	esac
-	;;
-    esac
-
-    # run the conversion and remove input files that have been copied over
-    (
-	cd $OUTDIR
-	$COMMAND $MULTIRUN $INFILES 2>/dev/null
-	if test "$SRCDIR" != "$OUTDIR"; then
-	    $RM $INFILES
-	fi
-    )
-
-    # Verify results
-    result="passed"
-    for f in $OUTFILES
-    do
-	if $cmp $SRCDIR/Expected/$f $OUTDIR/$f
-	then
-	    :
-	else
-	    # Use hdp to dump the files and verify the output.
-	    # Filter out the output of "reference = ..." because
-	    # reference numbers are immaterial in general.
-	    outfile=`basename $f .hdf`
-	    expect_out=$outfile.expect
-	    actual_out=$outfile.actual
-
-	    if [ $outfile = "tloop" -a $H4DUMPVER -lt 413 ]
-	    then
-		echo " -SKIP-"
-		result="skipped"
-		touch $expect_out $actual_out	# fake them
-	    else
-		(cd $SRCDIR/Expected
-		$H4DUMP dumpvg $outfile.hdf
-		$H4DUMP dumpvd $outfile.hdf
-		$H4DUMP dumpsds $outfile.hdf ) |
-		sed -e 's/reference = [0-9]*;//' > $expect_out
-		(cd $OUTDIR
-		$H4DUMP dumpvg $outfile.hdf
-		$H4DUMP dumpvd $outfile.hdf
-		$H4DUMP dumpsds $outfile.hdf ) |
-		sed -e 's/reference = [0-9]*;//' > $actual_out
-	    fi
-
-	    if [ "passed" = $result -a ! -s $actual_out ] ; then
-		echo "*FAILED*"
-		nerrors="`expr $nerrors + 1`"
-		result=failed
-		test yes = "$verbose" &&
-		echo "    H4DUMP failed to produce valid output"
-	    elif $cmp $expect_out $actual_out; then
-		:
-	    else
-		if test "passed" = $result; then
-		    echo "*FAILED*"
-		    nerrors="`expr $nerrors + 1`"
-		    result=failed
-		fi
-		test yes = "$verbose" &&
-		echo "    Actual result (*.actual) differs from expected result (*.expect)" &&
-		$diff $expect_out $actual_out |sed 's/^/    /'
-	    fi
-	fi
-
-	# Clean up output file
-	if test -z "$HDF5_NOCLEANUP"; then
-	    $RM $expect_out $actual_out
-	    $RM $OUTDIR/$f
-	fi
-    done
-    if test "passed" = "$result"; then
-	    echo " PASSED"
-    fi
-}
-
-
-
-##############################################################################
-##############################################################################
-###			  T H E   T E S T S                                ###
-##############################################################################
-##############################################################################
-
-$RM $OUTDIR/*.hdf $OUTDIR/*.tmp
-
-#
-# The HDF4 filenames are created based upon the HDF5 filenames
-# without the extension.
-#
-
-# test for converting H5 groups to H4 Vgroups.
-CONVERT tgroup.h5
-
-# test for converting H5 datasets to H4 SDS's.
-CONVERT tdset.h5
-
-# test for converting H5 attributes to H4 attributes.
-CONVERT tattr.h5
-
-# test for converting H5 soft links.
-CONVERT tslink.h5
-
-# test for converting H5 hard links.
-CONVERT thlink.h5
-
-# test for converting H5 compound data type to H4 Vdata.
-CONVERT tcompound.h5
-
-# test for converting all H5 objects at in same file.
-CONVERT tall.h5
-
-# tests for converting H5 objects with loops.
-CONVERT tloop.h5
-
-# test for converting extendable H5 datasets to H4 SDS's.
-CONVERT tdset2.h5
-
-# test for converting extendable H5 datasets with compound data type to H4 Vdata.
-CONVERT tcompound2.h5
-
-# tests for converting H5 objects from many different pathways.
-CONVERT tmany.h5
-
-# tests for converting H5 string objects.
-CONVERT tstr.h5
-
-# tests for converting more H5 string objects.
-CONVERT tstr2.h5
-
-#
-# The test for conversion are the same as above with the only difference
-# being that the HDF4 filenames are given explicitly.
-#
-
-$RM $OUTDIR/*.tmp
-CONVERT tgroup.h5 tgroup.hdf
-CONVERT tdset.h5 tdset.hdf
-CONVERT tattr.h5 tattr.hdf
-CONVERT tslink.h5 tslink.hdf
-CONVERT thlink.h5 thlink.hdf
-CONVERT tcompound.h5 tcompound.hdf
-CONVERT tall.h5 tall.hdf
-CONVERT tloop.h5 tloop.hdf
-CONVERT tdset2.h5 tdset2.hdf
-CONVERT tcompound2.h5 tcompound2.hdf
-CONVERT tmany.h5 tmany.hdf
-CONVERT tstr.h5 tstr.hdf
-CONVERT tstr2.h5 tstr2.hdf
-
-#
-# Again, the test for conversion are the same as the first set of test.
-# Here, multiple conversion are done on HDF5 files at one time.
-#
-
-$RM $OUTDIR/*.hdf $OUTDIR/*.tmp
-CONVERT -m tgroup.h5 tdset.h5 tattr.h5 tslink.h5 thlink.h5
-CONVERT -m tcompound.h5 tall.h5
-CONVERT -m tloop.h5
-CONVERT -m tdset2.h5 tcompound2.h5 tmany.h5
-CONVERT -m tstr.h5 tstr2.h5
-
-if test $nerrors -eq 0 ; then
-	echo "All h5toh4 tests passed."
-fi
-
-if test -z "$HDF5_NOCLEANUP"; then
-    $RM -r $OUTDIR
-fi
-exit $nerrors