Moved libdynlib* plugin test libraries to noist_LT_LIBRARIES with added

flag '-rpath /nowhere' to stop them being installed while keeping them
from linking with libhdf5, etc.
Incremented version to 1.8.19-pre1 and ran bin/release to create tar
and zip files for testing.

16 files changed, 233 insertions, 396 deletions

diff --git a/tools/Makefile.in b/tools/Makefile.in
index 877984e..f0fe67c 100644
--- a/tools/Makefile.in
+++ b/tools/Makefile.in
@@ -679,12 +679,10 @@ SUBDIRS = lib h5diff h5ls h5dump misc h5import h5repack h5jam h5copy h5stat \
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -1170,7 +1168,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1178,7 +1175,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/h5copy/Makefile.in b/tools/h5copy/Makefile.in
index f6b7dac..55b4584 100644
--- a/tools/h5copy/Makefile.in
+++ b/tools/h5copy/Makefile.in
@@ -698,12 +698,10 @@ LDADD = $(LIBH5TOOLS) $(LIBHDF5)
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -1231,7 +1229,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1239,7 +1236,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/h5diff/Makefile.am b/tools/h5diff/Makefile.am
index 337261a..4b153d5 100644
--- a/tools/h5diff/Makefile.am
+++ b/tools/h5diff/Makefile.am
@@ -58,14 +58,12 @@ LDADD=$(LIBH5TOOLS) $(LIBHDF5)
 
 if HAVE_SHARED_CONDITIONAL
   # Build it as shared library if configure is enabled for shared library.
-  dyn_LTLIBRARIES=libdynlibdiff.la
+  noinst_LTLIBRARIES=libdynlibdiff.la
   libdynlibdiff_la_SOURCES=dynlib_diff.c
-  libdynlibdiff_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
+  libdynlibdiff_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
 
 libdynlibdiff.la: $(libdynlibdiff_la_OBJECTS) $(libdynlibdiff_la_DEPENDENCIES) $(EXTRA_libdynlibdiff_la_DEPENDENCIES)
 	$(AM_V_CCLD)$(libdynlibdiff_la_LINK) $(am_libdynlibdiff_la_rpath) $(libdynlibdiff_la_OBJECTS) $(libdynlibdiff_la_LIBADD)
-#install-exec-hook:
-#	$(RM) $(DESTDIR)$(libdir)/*dynlib*
 endif
 
 # Temporary files.  *.h5 are generated by h5diff.  They should
diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in
index cea2023..37aeb26 100644
--- a/tools/h5diff/Makefile.in
+++ b/tools/h5diff/Makefile.in
@@ -119,35 +119,7 @@ mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/src/H5config.h
 CONFIG_CLEAN_FILES = h5diff_plugin.sh testh5diff.sh testph5diff.sh
 CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(dyndir)" "$(DESTDIR)$(bindir)"
-LTLIBRARIES = $(dyn_LTLIBRARIES)
+LTLIBRARIES = $(noinst_LTLIBRARIES)
 libdynlibdiff_la_LIBADD =
 am__libdynlibdiff_la_SOURCES_DIST = dynlib_diff.c
 @HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibdiff_la_OBJECTS =  \
@@ -161,9 +133,9 @@ libdynlibdiff_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
 	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
 	$(AM_CFLAGS) $(CFLAGS) $(libdynlibdiff_la_LDFLAGS) $(LDFLAGS) \
 	-o $@
-@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibdiff_la_rpath = -rpath \
-@HAVE_SHARED_CONDITIONAL_TRUE@	$(dyndir)
+@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibdiff_la_rpath =
 @BUILD_PARALLEL_CONDITIONAL_TRUE@am__EXEEXT_1 = ph5diff$(EXEEXT)
+am__installdirs = "$(DESTDIR)$(bindir)"
 am__EXEEXT_2 = h5diffgentest$(EXEEXT)
 PROGRAMS = $(bin_PROGRAMS)
 am_h5diff_OBJECTS = h5diff_main.$(OBJEXT) h5diff_common.$(OBJEXT)
@@ -265,6 +237,33 @@ am__tty_colors = { \
     std=''; \
   fi; \
 }
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__recheck_rx = ^[ 	]*:recheck:[ 	]*
 am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
 am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
@@ -692,8 +691,6 @@ TRACE = perl $(top_srcdir)/bin/trace
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
 # *.clog and *.clog2 are from the MPE option.
-#install-exec-hook:
-#	$(RM) $(DESTDIR)$(libdir)/*dynlib*
 
 # Temporary files.  *.h5 are generated by h5diff.  They should
 # be copied to the testfiles/ directory if update is required
@@ -722,9 +719,9 @@ h5diffgentest_SOURCES = h5diffgentest.c
 
 # Programs depend on the main HDF5 library and tools library
 LDADD = $(LIBH5TOOLS) $(LIBHDF5)
-@HAVE_SHARED_CONDITIONAL_TRUE@dyn_LTLIBRARIES = libdynlibdiff.la
+@HAVE_SHARED_CONDITIONAL_TRUE@noinst_LTLIBRARIES = libdynlibdiff.la
 @HAVE_SHARED_CONDITIONAL_TRUE@libdynlibdiff_la_SOURCES = dynlib_diff.c
-@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibdiff_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
+@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibdiff_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
 DISTCLEANFILES = h5diff_plugin.sh
 
 # Automake needs to be taught how to build lib, dyn, progs, and tests targets.
@@ -735,12 +732,10 @@ DISTCLEANFILES = h5diff_plugin.sh
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -789,33 +784,9 @@ testh5diff.sh: $(top_builddir)/config.status $(srcdir)/testh5diff.sh.in
 testph5diff.sh: $(top_builddir)/config.status $(srcdir)/testph5diff.sh.in
 	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 
-install-dynLTLIBRARIES: $(dyn_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(dyn_LTLIBRARIES)'; test -n "$(dyndir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(dyndir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(dyndir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(dyndir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(dyndir)"; \
-	}
-
-uninstall-dynLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dyn_LTLIBRARIES)'; test -n "$(dyndir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(dyndir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(dyndir)/$$f"; \
-	done
-
-clean-dynLTLIBRARIES:
-	-test -z "$(dyn_LTLIBRARIES)" || rm -f $(dyn_LTLIBRARIES)
-	@list='$(dyn_LTLIBRARIES)'; \
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; \
 	locs=`for p in $$list; do echo $$p; done | \
 	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
 	      sort -u`; \
@@ -1176,7 +1147,7 @@ check-am: all-am
 check: check-am
 all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
 installdirs:
-	for dir in "$(DESTDIR)$(dyndir)" "$(DESTDIR)$(bindir)"; do \
+	for dir in "$(DESTDIR)$(bindir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -1215,8 +1186,8 @@ maintainer-clean-generic:
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-dynLTLIBRARIES \
-	clean-generic clean-libtool mostlyclean-am
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool clean-noinstLTLIBRARIES mostlyclean-am
 
 distclean: distclean-am
 	-rm -rf ./$(DEPDIR)
@@ -1236,7 +1207,7 @@ info: info-am
 
 info-am:
 
-install-data-am: install-dynLTLIBRARIES
+install-data-am:
 
 install-dvi: install-dvi-am
 
@@ -1282,26 +1253,25 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-binPROGRAMS uninstall-dynLTLIBRARIES
+uninstall-am: uninstall-binPROGRAMS
 
 .MAKE: check-am install-am install-strip
 
 .PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
 	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-dynLTLIBRARIES clean-generic clean-libtool cscopelist-am \
-	ctags ctags-am distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-dynLTLIBRARIES install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
-	recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-dynLTLIBRARIES
+	clean-generic clean-libtool clean-noinstLTLIBRARIES \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
+	uninstall uninstall-am uninstall-binPROGRAMS
 
 .PRECIOUS: Makefile
 
@@ -1324,7 +1294,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1332,7 +1301,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/h5dump/Makefile.am b/tools/h5dump/Makefile.am
index 98e1d1d..bac0f73 100644
--- a/tools/h5dump/Makefile.am
+++ b/tools/h5dump/Makefile.am
@@ -48,15 +48,12 @@ h5dump_SOURCES=h5dump.c h5dump_ddl.c h5dump_xml.c
 
 if HAVE_SHARED_CONDITIONAL
   # Build it as shared library if configure is enabled for shared library.
-  dyn_LTLIBRARIES=libdynlibdump.la
+  noinst_LTLIBRARIES=libdynlibdump.la
   libdynlibdump_la_SOURCES=dynlib_dump.c
-  libdynlibdump_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
+  libdynlibdump_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
 
 libdynlibdump.la: $(libdynlibdump_la_OBJECTS) $(libdynlibdump_la_DEPENDENCIES) $(EXTRA_libdynlibdump_la_DEPENDENCIES)
 	$(AM_V_CCLD)$(libdynlibdump_la_LINK) $(am_libdynlibdump_la_rpath) $(libdynlibdump_la_OBJECTS) $(libdynlibdump_la_LIBADD)
-
-#install-exec-hook:
-#	$(RM) $(DESTDIR)$(libdir)/*dynlib*
 endif
 
 # Temporary files.  *.h5 are generated by h5dumpgentest.  They should
diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in
index 8a42296..82b6011 100644
--- a/tools/h5dump/Makefile.in
+++ b/tools/h5dump/Makefile.in
@@ -120,35 +120,7 @@ CONFIG_HEADER = $(top_builddir)/src/H5config.h
 CONFIG_CLEAN_FILES = h5dump_plugin.sh testh5dump.sh testh5dumppbits.sh \
 	testh5dumpxml.sh
 CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(dyndir)" "$(DESTDIR)$(bindir)"
-LTLIBRARIES = $(dyn_LTLIBRARIES)
+LTLIBRARIES = $(noinst_LTLIBRARIES)
 libdynlibdump_la_LIBADD =
 am__libdynlibdump_la_SOURCES_DIST = dynlib_dump.c
 @HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibdump_la_OBJECTS =  \
@@ -162,8 +134,8 @@ libdynlibdump_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
 	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
 	$(AM_CFLAGS) $(CFLAGS) $(libdynlibdump_la_LDFLAGS) $(LDFLAGS) \
 	-o $@
-@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibdump_la_rpath = -rpath \
-@HAVE_SHARED_CONDITIONAL_TRUE@	$(dyndir)
+@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibdump_la_rpath =
+am__installdirs = "$(DESTDIR)$(bindir)"
 am__EXEEXT_1 = h5dumpgentest$(EXEEXT)
 PROGRAMS = $(bin_PROGRAMS)
 binread_SOURCES = binread.c
@@ -266,6 +238,33 @@ am__tty_colors = { \
     std=''; \
   fi; \
 }
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__recheck_rx = ^[ 	]*:recheck:[ 	]*
 am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
 am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
@@ -695,9 +694,6 @@ TRACE = perl $(top_srcdir)/bin/trace
 # .chklog files are output from those tests.
 # *.clog and *.clog2 are from the MPE option.
 
-#install-exec-hook:
-#	$(RM) $(DESTDIR)$(libdir)/*dynlib*
-
 # Temporary files.  *.h5 are generated by h5dumpgentest.  They should
 # copied to the testfiles/ directory if update is required.
 CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.bin
@@ -717,9 +713,9 @@ LDADD = $(LIBH5TOOLS) $(LIBHDF5)
 
 # Source files for the program
 h5dump_SOURCES = h5dump.c h5dump_ddl.c h5dump_xml.c
-@HAVE_SHARED_CONDITIONAL_TRUE@dyn_LTLIBRARIES = libdynlibdump.la
+@HAVE_SHARED_CONDITIONAL_TRUE@noinst_LTLIBRARIES = libdynlibdump.la
 @HAVE_SHARED_CONDITIONAL_TRUE@libdynlibdump_la_SOURCES = dynlib_dump.c
-@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibdump_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
+@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibdump_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
 DISTCLEANFILES = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh
 
 # Automake needs to be taught how to build lib, dyn, progs, and tests targets.
@@ -730,12 +726,10 @@ DISTCLEANFILES = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -786,33 +780,9 @@ testh5dumppbits.sh: $(top_builddir)/config.status $(srcdir)/testh5dumppbits.sh.i
 testh5dumpxml.sh: $(top_builddir)/config.status $(srcdir)/testh5dumpxml.sh.in
 	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 
-install-dynLTLIBRARIES: $(dyn_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(dyn_LTLIBRARIES)'; test -n "$(dyndir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(dyndir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(dyndir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(dyndir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(dyndir)"; \
-	}
-
-uninstall-dynLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dyn_LTLIBRARIES)'; test -n "$(dyndir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(dyndir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(dyndir)/$$f"; \
-	done
-
-clean-dynLTLIBRARIES:
-	-test -z "$(dyn_LTLIBRARIES)" || rm -f $(dyn_LTLIBRARIES)
-	@list='$(dyn_LTLIBRARIES)'; \
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; \
 	locs=`for p in $$list; do echo $$p; done | \
 	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
 	      sort -u`; \
@@ -1174,7 +1144,7 @@ check-am: all-am
 check: check-am
 all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
 installdirs:
-	for dir in "$(DESTDIR)$(dyndir)" "$(DESTDIR)$(bindir)"; do \
+	for dir in "$(DESTDIR)$(bindir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -1213,8 +1183,8 @@ maintainer-clean-generic:
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-dynLTLIBRARIES \
-	clean-generic clean-libtool mostlyclean-am
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool clean-noinstLTLIBRARIES mostlyclean-am
 
 distclean: distclean-am
 	-rm -rf ./$(DEPDIR)
@@ -1234,7 +1204,7 @@ info: info-am
 
 info-am:
 
-install-data-am: install-dynLTLIBRARIES
+install-data-am:
 
 install-dvi: install-dvi-am
 
@@ -1280,26 +1250,25 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-binPROGRAMS uninstall-dynLTLIBRARIES
+uninstall-am: uninstall-binPROGRAMS
 
 .MAKE: check-am install-am install-strip
 
 .PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
 	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-dynLTLIBRARIES clean-generic clean-libtool cscopelist-am \
-	ctags ctags-am distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-dynLTLIBRARIES install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
-	recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-dynLTLIBRARIES
+	clean-generic clean-libtool clean-noinstLTLIBRARIES \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
+	uninstall uninstall-am uninstall-binPROGRAMS
 
 .PRECIOUS: Makefile
 
@@ -1322,7 +1291,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1330,7 +1298,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in
index fc9b4ff..f41f144 100644
--- a/tools/h5import/Makefile.in
+++ b/tools/h5import/Makefile.in
@@ -695,12 +695,10 @@ LDADD = $(LIBH5TOOLS) $(LIBHDF5)
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -1228,7 +1226,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1236,7 +1233,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in
index d069943..33510b9 100644
--- a/tools/h5jam/Makefile.in
+++ b/tools/h5jam/Makefile.in
@@ -707,12 +707,10 @@ DISTCLEANFILES = testh5jam.sh
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -1249,7 +1247,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1257,7 +1254,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/h5ls/Makefile.am b/tools/h5ls/Makefile.am
index 1084215..e257fbd 100644
--- a/tools/h5ls/Makefile.am
+++ b/tools/h5ls/Makefile.am
@@ -42,15 +42,12 @@ LDADD=$(LIBH5TOOLS) $(LIBHDF5)
 
 if HAVE_SHARED_CONDITIONAL
   # Build it as shared library if configure is enabled for shared library.
-  dyn_LTLIBRARIES=libdynlibls.la
+  noinst_LTLIBRARIES=libdynlibls.la
   libdynlibls_la_SOURCES=dynlib_ls.c
-  libdynlibls_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
+  libdynlibls_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
 
 libdynlibls.la: $(libdynlibls_la_OBJECTS) $(libdynlibls_la_DEPENDENCIES) $(EXTRA_libdynlibls_la_DEPENDENCIES)
 	$(AM_V_CCLD)$(libdynlibls_la_LINK) $(am_libdynlibls_la_rpath) $(libdynlibls_la_OBJECTS) $(libdynlibls_la_LIBADD)
-
-#install-exec-hook:
-#	$(RM) $(DESTDIR)$(libdir)/*dynlib*
 endif
 
 DISTCLEANFILES=h5ls_plugin.sh
diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in
index 9479c7e..96224e4 100644
--- a/tools/h5ls/Makefile.in
+++ b/tools/h5ls/Makefile.in
@@ -118,35 +118,7 @@ mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/src/H5config.h
 CONFIG_CLEAN_FILES = h5ls_plugin.sh testh5ls.sh
 CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(dyndir)" "$(DESTDIR)$(bindir)"
-LTLIBRARIES = $(dyn_LTLIBRARIES)
+LTLIBRARIES = $(noinst_LTLIBRARIES)
 libdynlibls_la_LIBADD =
 am__libdynlibls_la_SOURCES_DIST = dynlib_ls.c
 @HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibls_la_OBJECTS =  \
@@ -160,8 +132,8 @@ libdynlibls_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
 	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
 	$(AM_CFLAGS) $(CFLAGS) $(libdynlibls_la_LDFLAGS) $(LDFLAGS) -o \
 	$@
-@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibls_la_rpath = -rpath \
-@HAVE_SHARED_CONDITIONAL_TRUE@	$(dyndir)
+@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibls_la_rpath =
+am__installdirs = "$(DESTDIR)$(bindir)"
 PROGRAMS = $(bin_PROGRAMS)
 h5ls_SOURCES = h5ls.c
 h5ls_OBJECTS = h5ls.$(OBJEXT)
@@ -252,6 +224,33 @@ am__tty_colors = { \
     std=''; \
   fi; \
 }
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__recheck_rx = ^[ 	]*:recheck:[ 	]*
 am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
 am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
@@ -689,12 +688,9 @@ h5ls_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
 
 # All programs depend on the hdf5 and h5tools libraries
 LDADD = $(LIBH5TOOLS) $(LIBHDF5)
-@HAVE_SHARED_CONDITIONAL_TRUE@dyn_LTLIBRARIES = libdynlibls.la
+@HAVE_SHARED_CONDITIONAL_TRUE@noinst_LTLIBRARIES = libdynlibls.la
 @HAVE_SHARED_CONDITIONAL_TRUE@libdynlibls_la_SOURCES = dynlib_ls.c
-@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibls_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
-
-#install-exec-hook:
-#	$(RM) $(DESTDIR)$(libdir)/*dynlib*
+@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibls_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
 DISTCLEANFILES = h5ls_plugin.sh
 
 # Automake needs to be taught how to build lib, dyn, progs, and tests targets.
@@ -705,12 +701,10 @@ DISTCLEANFILES = h5ls_plugin.sh
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -757,33 +751,9 @@ h5ls_plugin.sh: $(top_builddir)/config.status $(srcdir)/h5ls_plugin.sh.in
 testh5ls.sh: $(top_builddir)/config.status $(srcdir)/testh5ls.sh.in
 	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 
-install-dynLTLIBRARIES: $(dyn_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(dyn_LTLIBRARIES)'; test -n "$(dyndir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(dyndir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(dyndir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(dyndir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(dyndir)"; \
-	}
-
-uninstall-dynLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dyn_LTLIBRARIES)'; test -n "$(dyndir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(dyndir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(dyndir)/$$f"; \
-	done
-
-clean-dynLTLIBRARIES:
-	-test -z "$(dyn_LTLIBRARIES)" || rm -f $(dyn_LTLIBRARIES)
-	@list='$(dyn_LTLIBRARIES)'; \
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; \
 	locs=`for p in $$list; do echo $$p; done | \
 	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
 	      sort -u`; \
@@ -1117,7 +1087,7 @@ check-am: all-am
 check: check-am
 all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
 installdirs:
-	for dir in "$(DESTDIR)$(dyndir)" "$(DESTDIR)$(bindir)"; do \
+	for dir in "$(DESTDIR)$(bindir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -1156,8 +1126,8 @@ maintainer-clean-generic:
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-clean-am: clean-binPROGRAMS clean-dynLTLIBRARIES clean-generic \
-	clean-libtool mostlyclean-am
+clean-am: clean-binPROGRAMS clean-generic clean-libtool \
+	clean-noinstLTLIBRARIES mostlyclean-am
 
 distclean: distclean-am
 	-rm -rf ./$(DEPDIR)
@@ -1177,7 +1147,7 @@ info: info-am
 
 info-am:
 
-install-data-am: install-dynLTLIBRARIES
+install-data-am:
 
 install-dvi: install-dvi-am
 
@@ -1223,26 +1193,25 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-binPROGRAMS uninstall-dynLTLIBRARIES
+uninstall-am: uninstall-binPROGRAMS
 
 .MAKE: check-am install-am install-strip
 
 .PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-dynLTLIBRARIES \
-	clean-generic clean-libtool cscopelist-am ctags ctags-am \
-	distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-dynLTLIBRARIES install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
-	recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-dynLTLIBRARIES
+	check-am clean clean-binPROGRAMS clean-generic clean-libtool \
+	clean-noinstLTLIBRARIES cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
 
 .PRECIOUS: Makefile
 
@@ -1265,7 +1234,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1273,7 +1241,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/h5repack/Makefile.am b/tools/h5repack/Makefile.am
index 59a98b8..0277919 100644
--- a/tools/h5repack/Makefile.am
+++ b/tools/h5repack/Makefile.am
@@ -61,19 +61,16 @@ h5repack.sh.chkexe_: h5repacktst.chkexe_
 
 if HAVE_SHARED_CONDITIONAL
   # Build it as shared library if configure is enabled for shared library.
-  dyn_LTLIBRARIES=libdynlibadd.la libdynlibvers.la
+  noinst_LTLIBRARIES=libdynlibadd.la libdynlibvers.la
   libdynlibadd_la_SOURCES=dynlib_rpk.c
   libdynlibvers_la_SOURCES=dynlib_vrpk.c
-  libdynlibadd_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
-  libdynlibvers_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
+  libdynlibadd_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
+  libdynlibvers_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
 
 libdynlibadd.la: $(libdynlibadd_la_OBJECTS) $(libdynlibadd_la_DEPENDENCIES) $(EXTRA_libdynlibadd_la_DEPENDENCIES)
 	$(AM_V_CCLD)$(libdynlibadd_la_LINK) $(am_libdynlibadd_la_rpath) $(libdynlibadd_la_OBJECTS) $(libdynlibadd_la_LIBADD)
 libdynlibvers.la: $(libdynlibvers_la_OBJECTS) $(libdynlibvers_la_DEPENDENCIES) $(EXTRA_libdynlibvers_la_DEPENDENCIES)
 	$(AM_V_CCLD)$(libdynlibvers_la_LINK) $(am_libdynlibvers_la_rpath) $(libdynlibvers_la_OBJECTS) $(libdynlibvers_la_LIBADD)
-
-#install-exec-hook:
-#	$(RM) $(DESTDIR)$(libdir)/*dynlib*
 endif
 
 # Temporary files.  *.h5 are generated by h5repack.  They should
diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in
index 34873e5..38367d9 100644
--- a/tools/h5repack/Makefile.in
+++ b/tools/h5repack/Makefile.in
@@ -120,35 +120,7 @@ mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/src/H5config.h
 CONFIG_CLEAN_FILES = h5repack.sh h5repack_plugin.sh
 CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(dyndir)" "$(DESTDIR)$(bindir)"
-LTLIBRARIES = $(dyn_LTLIBRARIES)
+LTLIBRARIES = $(noinst_LTLIBRARIES)
 libdynlibadd_la_LIBADD =
 am__libdynlibadd_la_SOURCES_DIST = dynlib_rpk.c
 @HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibadd_la_OBJECTS =  \
@@ -162,8 +134,7 @@ libdynlibadd_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
 	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
 	$(AM_CFLAGS) $(CFLAGS) $(libdynlibadd_la_LDFLAGS) $(LDFLAGS) \
 	-o $@
-@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibadd_la_rpath = -rpath \
-@HAVE_SHARED_CONDITIONAL_TRUE@	$(dyndir)
+@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibadd_la_rpath =
 libdynlibvers_la_LIBADD =
 am__libdynlibvers_la_SOURCES_DIST = dynlib_vrpk.c
 @HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibvers_la_OBJECTS =  \
@@ -173,8 +144,8 @@ libdynlibvers_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
 	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
 	$(AM_CFLAGS) $(CFLAGS) $(libdynlibvers_la_LDFLAGS) $(LDFLAGS) \
 	-o $@
-@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibvers_la_rpath = -rpath \
-@HAVE_SHARED_CONDITIONAL_TRUE@	$(dyndir)
+@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibvers_la_rpath =
+am__installdirs = "$(DESTDIR)$(bindir)"
 am__EXEEXT_1 = h5repacktst$(EXEEXT)
 PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
 am__objects_1 = h5repack.$(OBJEXT) h5repack_copy.$(OBJEXT) \
@@ -285,6 +256,33 @@ am__tty_colors = { \
     std=''; \
   fi; \
 }
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__recheck_rx = ^[ 	]*:recheck:[ 	]*
 am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
 am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
@@ -713,9 +711,6 @@ TRACE = perl $(top_srcdir)/bin/trace
 # .chklog files are output from those tests.
 # *.clog and *.clog2 are from the MPE option.
 
-#install-exec-hook:
-#	$(RM) $(DESTDIR)$(libdir)/*dynlib*
-
 # Temporary files.  *.h5 are generated by h5repack.  They should
 # copied to the testfiles/ directory if update is required.
 CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.bin \
@@ -741,11 +736,11 @@ COMMON_SOURCES = h5repack.c h5repack_copy.c h5repack_filters.c \
 h5repack_SOURCES = $(COMMON_SOURCES) h5repack_main.c
 h5repacktst_SOURCES = $(COMMON_SOURCES) h5repacktst.c 
 testh5repack_detect_szip_SOURCES = testh5repack_detect_szip.c
-@HAVE_SHARED_CONDITIONAL_TRUE@dyn_LTLIBRARIES = libdynlibadd.la libdynlibvers.la
+@HAVE_SHARED_CONDITIONAL_TRUE@noinst_LTLIBRARIES = libdynlibadd.la libdynlibvers.la
 @HAVE_SHARED_CONDITIONAL_TRUE@libdynlibadd_la_SOURCES = dynlib_rpk.c
 @HAVE_SHARED_CONDITIONAL_TRUE@libdynlibvers_la_SOURCES = dynlib_vrpk.c
-@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibadd_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
-@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibvers_la_LDFLAGS = -avoid-version -module -shared -export-dynamic
+@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibadd_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
+@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibvers_la_LDFLAGS = -avoid-version -module -shared -export-dynamic -rpath /nowhere
 DISTCLEANFILES = h5repack.sh h5repack_plugin.sh
 
 # Automake needs to be taught how to build lib, dyn, progs, and tests targets.
@@ -756,12 +751,10 @@ DISTCLEANFILES = h5repack.sh h5repack_plugin.sh
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -808,33 +801,9 @@ h5repack.sh: $(top_builddir)/config.status $(srcdir)/h5repack.sh.in
 h5repack_plugin.sh: $(top_builddir)/config.status $(srcdir)/h5repack_plugin.sh.in
 	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 
-install-dynLTLIBRARIES: $(dyn_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(dyn_LTLIBRARIES)'; test -n "$(dyndir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(dyndir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(dyndir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(dyndir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(dyndir)"; \
-	}
-
-uninstall-dynLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dyn_LTLIBRARIES)'; test -n "$(dyndir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(dyndir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(dyndir)/$$f"; \
-	done
-
-clean-dynLTLIBRARIES:
-	-test -z "$(dyn_LTLIBRARIES)" || rm -f $(dyn_LTLIBRARIES)
-	@list='$(dyn_LTLIBRARIES)'; \
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; \
 	locs=`for p in $$list; do echo $$p; done | \
 	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
 	      sort -u`; \
@@ -1214,7 +1183,7 @@ check-am: all-am
 check: check-am
 all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
 installdirs:
-	for dir in "$(DESTDIR)$(dyndir)" "$(DESTDIR)$(bindir)"; do \
+	for dir in "$(DESTDIR)$(bindir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -1253,8 +1222,8 @@ maintainer-clean-generic:
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-dynLTLIBRARIES \
-	clean-generic clean-libtool clean-noinstPROGRAMS \
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
 	mostlyclean-am
 
 distclean: distclean-am
@@ -1275,7 +1244,7 @@ info: info-am
 
 info-am:
 
-install-data-am: install-dynLTLIBRARIES
+install-data-am:
 
 install-dvi: install-dvi-am
 
@@ -1321,27 +1290,26 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-binPROGRAMS uninstall-dynLTLIBRARIES
+uninstall-am: uninstall-binPROGRAMS
 
 .MAKE: check-am install-am install-strip
 
 .PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
 	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-dynLTLIBRARIES clean-generic clean-libtool \
+	clean-generic clean-libtool clean-noinstLTLIBRARIES \
 	clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
 	distclean-compile distclean-generic distclean-libtool \
 	distclean-tags distdir dvi dvi-am html html-am info info-am \
 	install install-am install-binPROGRAMS install-data \
-	install-data-am install-dvi install-dvi-am \
-	install-dynLTLIBRARIES install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
-	recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-dynLTLIBRARIES
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
 
 .PRECIOUS: Makefile
 
@@ -1369,7 +1337,6 @@ h5repack.sh.chkexe_: h5repacktst.chkexe_
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1377,7 +1344,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/h5stat/Makefile.in b/tools/h5stat/Makefile.in
index 5220f4f..6a54005 100644
--- a/tools/h5stat/Makefile.in
+++ b/tools/h5stat/Makefile.in
@@ -706,12 +706,10 @@ LDADD = $(LIBH5TOOLS) $(LIBHDF5)
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -1277,7 +1275,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1285,7 +1282,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in
index 62fa41d..3d8d642 100644
--- a/tools/lib/Makefile.in
+++ b/tools/lib/Makefile.in
@@ -684,12 +684,10 @@ LDADD = libh5tools.la $(LIBHDF5)
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -1173,7 +1171,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1181,7 +1178,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in
index 049171b..ede947b 100644
--- a/tools/misc/Makefile.in
+++ b/tools/misc/Makefile.in
@@ -738,12 +738,10 @@ LDADD = $(LIBH5TOOLS) $(LIBHDF5)
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -1351,7 +1349,6 @@ h5redeploy: h5redeploy.in
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1359,7 +1356,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
diff --git a/tools/perform/Makefile.in b/tools/perform/Makefile.in
index a59f3b0..92a5b94 100644
--- a/tools/perform/Makefile.in
+++ b/tools/perform/Makefile.in
@@ -745,12 +745,10 @@ perf_meta_LDADD = $(LIBH5TEST) $(LIBHDF5)
 LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 
-DYN = $(dyn_LTLIBRARIES)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
 chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-dyndir = $(libdir)
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
 AM_SH_LOG_FLAGS = 
@@ -1344,7 +1342,6 @@ help:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-dyn: $(DYN)
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
 build-tests: $(LIB) $(PROGS) $(chk_TESTS)
@@ -1352,7 +1349,7 @@ build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
 # in the directory (e.g., for Fortran type detection)
-lib dyn progs tests check-s check-p :: $(BUILT_SOURCES)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \