[svn-r26234] Removed VMS support from the library. A tag (vms_last_support_trunk) was created just before the VMS files were deleted.

1 files changed, 0 insertions, 197 deletions

diff --git a/vms/tools/h5repack/check_h5repack.com b/vms/tools/h5repack/check_h5repack.com
deleted file mode 100644
index 34c122c..0000000
--- a/vms/tools/h5repack/check_h5repack.com
+++ /dev/null
@@ -1,197 +0,0 @@
-$!#
-$!# Copyright by The HDF Group.
-$!# Copyright by the Board of Trustees of the University of Illinois.
-$!# All rights reserved.
-$!#
-$!# This file is part of HDF5.  The full HDF5 copyright notice, including
-$!# terms governing use, modification, and redistribution, is contained in
-$!# the files COPYING and Copyright.html.  COPYING can be found at the root
-$!# of the source code distribution tree; Copyright.html can be found at the
-$!# root level of an installed copy of the electronic HDF5 document set and
-$!# is linked from the top-level documents page.  It can also be found at
-$!# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-$!# access to either file, you may request a copy from help@hdfgroup.org.
-$!#
-$!
-$ !
-$ ! This command file tests h5repack utility. The command file has to
-$ ! run in the [hdf5-top.tools.h5repack.testfiles] directory.
-$ !
-$ !
-$ type sys$input
-
-===================================
-       Testing h5repack utiltity
-===================================
-
-$ ! Define h5repack and h5diff symbols
-$ !
-$! set message/notext/nofacility/noidentification/noseverity
-$ current_dir = F$DIRECTRY()
-$ len = F$LENGTH(current_dir)
-$ temp = F$EXTRACT(0, len-11, current_dir)
-$ temp1 = F$EXTRACT(0, len-19, current_dir)
-$ h5diff_dir = temp1 + "H5DIFF]"
-$ h5diff :== $sys$disk:'h5diff_dir'h5diff.exe
-$ h5repack_dir = temp + "]"
-$ h5repack :== $sys$disk:'h5repack_dir'h5repack.exe
-$ !
-$ !
-$ ! h5repack tests
-$ !
-$
-
-$!# copy files (these files have no filters) 
-$ CALL TOOLTEST "" h5repack_fill.h5
-$ CALL TOOLTEST "" h5repack_objs.h5
-$ CALL TOOLTEST "" h5repack_attr.h5
-$ CALL TOOLTEST "" h5repack_hlink.h5
-$ CALL TOOLTEST "" h5repack_layout.h5
-$ CALL TOOLTEST "" h5repack_early.h5
-
-$! Check repacking file with committed datatypes in odd configurations
-$ CALL TOOLTEST "" h5repack_named_dtypes.h5
-$ 
-$! # use h5repack_layout.h5 to write some filters  (this file has  no filters)
-$ 
-$! # gzip with individual object
-$ CALL TOOLTEST "-f dset1:"""GZIP"""=1  -l dset1:"""CHUNK"""=20x10" h5repack_layout.h5
-$!   
-$
-$! # gzip for all 
-$ CALL TOOLTEST "-f """GZIP"""=1" h5repack_layout.h5
-$! 
-$! # shuffle with individual object
-$ CALL TOOLTEST "-f dset2:"""SHUF"""  -l dset2:"""CHUNK"""=20x10" h5repack_layout.h5
-$ 
-$!   
-$! 
-$! # shuffle for all
-$ CALL TOOLTEST "-f """SHUF"""" h5repack_layout.h5
-$!   
-$! # fletcher32  with individual object
-$ CALL TOOLTEST "-f dset2:"""FLET"""  -l dset2:"""CHUNK"""=20x10" h5repack_layout.h5
-$! 
-$! # fletcher32 for all
-$ CALL TOOLTEST "-f """FLET"""" h5repack_layout.h5
-$ 
-$! ###########################################################
-$! # the following tests assume the input files have filters
-$! ###########################################################
-$! 
-$! # deflate copy
-$ CALL TOOLTEST "" h5repack_deflate.h5
-$! 
-$! # deflate remove
-$ CALL TOOLTEST "-f dset_deflate:"""NONE"""" h5repack_deflate.h5
-$!     
-$! # shuffle copy
-$ CALL TOOLTEST "" h5repack_shuffle.h5
-$! 
-$! # shuffle remove
-$ CALL TOOLTEST "-f dset_shuffle:"""NONE"""" h5repack_shuffle.h5
-$! 
-$! # fletcher32 copy
-$ CALL TOOLTEST "" h5repack_fletcher.h5
-$! 
-$! # fletcher32 remove
-$ CALL TOOLTEST "-f dset_fletcher32:"""NONE"""" h5repack_fletcher.h5
-$! 
-$! # nbit copy
-$ CALL TOOLTEST "" h5repack_nbit.h5
-$! 
-$! # nbit remove
-$ CALL TOOLTEST "-f dset_nbit:"""NONE"""" h5repack_nbit.h5
-$! 
-$! # nbit add
-$ CALL TOOLTEST "-f dset_int31:"""NBIT"""" h5repack_nbit.h5
-$! 
-$! # scaleoffset add
-$! CALL TOOLTEST "-f dset_none:"""S+O"""=31" h5repack_scaleoffset.h5
-$! 
-$! # scaleoffset copy
-$! CALL TOOLTEST "" h5repack_scaleoffset.h5
-$! 
-$! # scaleoffset remove
-$! CALL TOOLTEST "-f dset_scaleoffset:"""NONE"""" h5repack_scaleoffset.h5
-$! 
-$! #limit
-$ CALL TOOLTEST "-f """GZIP"""=1 -m 1024" h5repack_layout.h5
-$! 
-$! 
-$! 
-$! #########################################################
-$! # layout options (these files have no filters)
-$! #########################################################
-$!
-$ CALL TOOLTEST "-l dset2:"""CHUNK"""=20x10" h5repack_layout.h5
-$ CALL TOOLTEST "-l """CHUNK"""=20x10" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset2:"""CONTI"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l """CONTI"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset2:"""COMPA"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l """COMPA"""" h5repack_layout.h5
-$! 
-$! 
-$! ################################################################
-$! # layout conversions (file has no filters)
-$! ###############################################################
-$! 
-$ CALL TOOLTEST "-l dset_compact:"""CONTI"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset_compact:"""CHUNK"""=2x5" h5repack_layout.h5 
-$ CALL TOOLTEST "-l dset_compact:"""COMPA"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset_contiguous:"""COMPA"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset_contiguous:"""CHUNK"""=3x6" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset_contiguous:"""CONTI"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset_chunk:"""COMPA"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset_chunk:"""CONTI"""" h5repack_layout.h5
-$ CALL TOOLTEST "-l dset_chunk:"""CHUNK"""=18x13" h5repack_layout.h5
-$!
-$!
-$!
-$TOOLTEST: SUBROUTINE
-
-$ len =  F$LENGTH(P2)
-$ base = F$EXTRACT(0,len-3,P2)
-$ output_file = base + "_out.h5"
-$ output_err = base + ".h5repackerr"
-$ output_out = base + ".h5repackout"
-$
-$ begin = "Testing h5repack"
-$ !
-$ ! Run the test and save output in the 'actual' file
-$ !
-$ define/nolog sys$error  'output_err'
-$ define/nolog sys$output 'output_out'
-$
-$ ON ERROR THEN CONTINUE
-$ h5repack 'P1 'P2 'output_file'
-$ h5diff 'P2 'output_file'
-$ deassign sys$error
-$ deassign sys$output
-$ if F$SEARCH(output_err) .EQS. "" 
-$ then
-$    result = "PASSED"
-$    line = F$FAO("!16AS !40AS !22AS !67AS", begin, P1, P2, result) 
-$  else
-$    result = "*FAILED*"
-$    line = F$FAO("!16AS !40AS !22AS !66AS", begin, P1, P2, result) 
-$ endif
-
-$ !
-$ ! Print test result
-$ ! 
-$  write sys$output line
-$ ! 
-$ !
-$ !
-$ ! Cleanup temporary files
-$ !
-$ if F$SEARCH(output_err) .NES. ""
-$ then 
-$  del *.h5repackerr;*
-$ endif 
-$  del *.h5repackout;*
-$  del  *_out.h5;*
-$ENDSUBROUTINE
-
-