summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MANIFEST2
-rw-r--r--README.txt2
-rw-r--r--c++/src/Makefile.in2
-rw-r--r--config/lt_vers.am2
-rwxr-xr-xconfigure22
-rw-r--r--configure.ac2
-rw-r--r--fortran/src/Makefile.in2
-rw-r--r--hl/c++/src/Makefile.in2
-rw-r--r--hl/fortran/src/Makefile.in2
-rw-r--r--hl/src/Makefile.in2
-rw-r--r--release_docs/RELEASE.txt8
-rw-r--r--src/H5public.h4
-rw-r--r--src/Makefile.in2
-rw-r--r--tools/h5dump/CMakeLists.txt47
-rw-r--r--tools/h5dump/h5dump.c63
-rw-r--r--tools/h5dump/h5dump_ddl.c208
-rw-r--r--tools/h5dump/h5dump_ddl.h1
-rw-r--r--tools/h5dump/testh5dump.sh.in10
-rw-r--r--tools/testfiles/h5dump-help.txt48
-rw-r--r--tools/testfiles/tall-7.ddl9
-rw-r--r--tools/testfiles/tall-7N.ddl17
-rw-r--r--tools/testfiles/tnofilename-with-packed-bits.ddl48
-rw-r--r--tools/testfiles/tpbitsIncomplete.ddl48
-rw-r--r--tools/testfiles/tpbitsLengthExceeded.ddl48
-rw-r--r--tools/testfiles/tpbitsLengthPositive.ddl48
-rw-r--r--tools/testfiles/tpbitsMaxExceeded.ddl48
-rw-r--r--tools/testfiles/tpbitsOffsetExceeded.ddl48
-rw-r--r--tools/testfiles/tpbitsOffsetNegative.ddl48
-rw-r--r--vms/src/h5pubconf.h6
29 files changed, 563 insertions, 236 deletions
diff --git a/MANIFEST b/MANIFEST
index 4ec386b..f269564 100644
--- a/MANIFEST
+++ b/MANIFEST
@@ -1437,6 +1437,8 @@
./tools/testfiles/tall-5s.ddl
./tools/testfiles/tall-6.ddl
./tools/testfiles/tall-6.exp
+./tools/testfiles/tall-7.ddl
+./tools/testfiles/tall-7N.ddl
./tools/testfiles/tall.h5
./tools/testfiles/tarray1.ddl
./tools/testfiles/tarray1.h5
diff --git a/README.txt b/README.txt
index d1f4550..3551695 100644
--- a/README.txt
+++ b/README.txt
@@ -1,4 +1,4 @@
-HDF5 version 1.9.161-FA_a5 currently under development
+HDF5 version 1.9.162-FA_a5 currently under development
Please refer to the release_docs/INSTALL file for installation instructions.
------------------------------------------------------------------------------
diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in
index 6e88509..261a7b0 100644
--- a/c++/src/Makefile.in
+++ b/c++/src/Makefile.in
@@ -467,7 +467,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog
# Add libtool shared library version numbers to the HDF5 library
# See libtool versioning documentation online.
LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 151
+LT_VERS_REVISION = 152
LT_VERS_AGE = 0
# Include src directory
diff --git a/config/lt_vers.am b/config/lt_vers.am
index e9ee77d..710e2a0 100644
--- a/config/lt_vers.am
+++ b/config/lt_vers.am
@@ -17,7 +17,7 @@
# Add libtool shared library version numbers to the HDF5 library
# See libtool versioning documentation online.
LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 151
+LT_VERS_REVISION = 152
LT_VERS_AGE = 0
## If the API changes *at all*, increment LT_VERS_INTERFACE and
diff --git a/configure b/configure
index 352955f..30423a1 100755
--- a/configure
+++ b/configure
@@ -1,7 +1,7 @@
#! /bin/sh
# From configure.ac Id: configure.ac 22697 2012-08-19 14:35:47Z hdftest .
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for HDF5 1.9.161-FA_a5.
+# Generated by GNU Autoconf 2.69 for HDF5 1.9.162-FA_a5.
#
# Report bugs to <help@hdfgroup.org>.
#
@@ -591,8 +591,8 @@ MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='HDF5'
PACKAGE_TARNAME='hdf5'
-PACKAGE_VERSION='1.9.161-FA_a5'
-PACKAGE_STRING='HDF5 1.9.161-FA_a5'
+PACKAGE_VERSION='1.9.162-FA_a5'
+PACKAGE_STRING='HDF5 1.9.162-FA_a5'
PACKAGE_BUGREPORT='help@hdfgroup.org'
PACKAGE_URL=''
@@ -1486,7 +1486,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures HDF5 1.9.161-FA_a5 to adapt to many kinds of systems.
+\`configure' configures HDF5 1.9.162-FA_a5 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1556,7 +1556,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of HDF5 1.9.161-FA_a5:";;
+ short | recursive ) echo "Configuration of HDF5 1.9.162-FA_a5:";;
esac
cat <<\_ACEOF
@@ -1752,7 +1752,7 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-HDF5 configure 1.9.161-FA_a5
+HDF5 configure 1.9.162-FA_a5
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2846,7 +2846,7 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by HDF5 $as_me 1.9.161-FA_a5, which was
+It was created by HDF5 $as_me 1.9.162-FA_a5, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -3678,7 +3678,7 @@ fi
# Define the identity of the package.
PACKAGE='hdf5'
- VERSION='1.9.161-FA_a5'
+ VERSION='1.9.162-FA_a5'
cat >>confdefs.h <<_ACEOF
@@ -31632,7 +31632,7 @@ Usage: $0 [OPTIONS]
Report bugs to <bug-libtool@gnu.org>."
lt_cl_version="\
-HDF5 config.lt 1.9.161-FA_a5
+HDF5 config.lt 1.9.162-FA_a5
configured by $0, generated by GNU Autoconf 2.69.
Copyright (C) 2011 Free Software Foundation, Inc.
@@ -33762,7 +33762,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by HDF5 $as_me 1.9.161-FA_a5, which was
+This file was extended by HDF5 $as_me 1.9.162-FA_a5, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -33828,7 +33828,7 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-HDF5 config.status 1.9.161-FA_a5
+HDF5 config.status 1.9.162-FA_a5
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
diff --git a/configure.ac b/configure.ac
index 8c110f8..9a8e617 100644
--- a/configure.ac
+++ b/configure.ac
@@ -26,7 +26,7 @@ AC_PREREQ([2.69])
## NOTE: Do not forget to change the version number here when we do a
## release!!!
##
-AC_INIT([HDF5], [1.9.161-FA_a5], [help@hdfgroup.org])
+AC_INIT([HDF5], [1.9.162-FA_a5], [help@hdfgroup.org])
AC_CONFIG_SRCDIR([src/H5.c])
AC_CONFIG_HEADER([src/H5config.h])
diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in
index 31d9871..65ebcaf 100644
--- a/fortran/src/Makefile.in
+++ b/fortran/src/Makefile.in
@@ -518,7 +518,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog
# Add libtool shared library version numbers to the HDF5 library
# See libtool versioning documentation online.
LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 151
+LT_VERS_REVISION = 152
LT_VERS_AGE = 0
# Include src directory in both Fortran and C flags (C compiler is used
diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in
index d805db3..369ccc2 100644
--- a/hl/c++/src/Makefile.in
+++ b/hl/c++/src/Makefile.in
@@ -458,7 +458,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog
# Add libtool shared library version numbers to the HDF5 library
# See libtool versioning documentation online.
LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 151
+LT_VERS_REVISION = 152
LT_VERS_AGE = 0
# Include src directory
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
index 353b844..85e4757 100644
--- a/hl/fortran/src/Makefile.in
+++ b/hl/fortran/src/Makefile.in
@@ -474,7 +474,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog
# Add libtool shared library version numbers to the HDF5 library
# See libtool versioning documentation online.
LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 151
+LT_VERS_REVISION = 152
LT_VERS_AGE = 0
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_builddir)/hl/src \
-I$(top_srcdir)/fortran/src -I$(top_builddir)/fortran/src
diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in
index 7c7b708..466449c 100644
--- a/hl/src/Makefile.in
+++ b/hl/src/Makefile.in
@@ -457,7 +457,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog
# Add libtool shared library version numbers to the HDF5 library
# See libtool versioning documentation online.
LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 151
+LT_VERS_REVISION = 152
LT_VERS_AGE = 0
# This library is our main target.
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt
index 359580d..c320061 100644
--- a/release_docs/RELEASE.txt
+++ b/release_docs/RELEASE.txt
@@ -1,4 +1,4 @@
-HDF5 version 1.9.161-FA_a5 currently under development
+HDF5 version 1.9.162-FA_a5 currently under development
INTRODUCTION
@@ -278,7 +278,11 @@ New Features
Tools:
------
- - h5dump: Fixed displaying comporession ratio for unknown or user-defined
+ - h5dump: Added option -N --any_path, which searches the file for paths that
+ match the search path. HDFFV-7989 (ADB - 2013/08/12).
+ - h5dump: Added optional arg 0 to -A, which excludes attributes from display.
+ HDFFV-8134 (ADB - 2013/08/01).
+ - h5dump: Fixed displaying compression ratio for unknown or user-defined
filters. HDFFV-8344 (XCAO 2013/03/19)
- h5dump: Changed UNKNOWN_FILTER to USER_DEFINED_FILTER for user defined filter.
HDFFV-8346 (XCAO 2013/03/19)
diff --git a/src/H5public.h b/src/H5public.h
index 9af8296..5087a8c 100644
--- a/src/H5public.h
+++ b/src/H5public.h
@@ -75,10 +75,10 @@ extern "C" {
/* Version numbers */
#define H5_VERS_MAJOR 1 /* For major interface/format changes */
#define H5_VERS_MINOR 9 /* For minor interface/format changes */
-#define H5_VERS_RELEASE 161 /* For tweaks, bug-fixes, or development */
+#define H5_VERS_RELEASE 162 /* For tweaks, bug-fixes, or development */
#define H5_VERS_SUBRELEASE "FA_a5" /* For pre-releases like snap0 */
/* Empty string for real releases. */
-#define H5_VERS_INFO "HDF5 library version: 1.9.161-FA_a5" /* Full version string */
+#define H5_VERS_INFO "HDF5 library version: 1.9.162-FA_a5" /* Full version string */
#define H5check() H5check_version(H5_VERS_MAJOR,H5_VERS_MINOR, \
H5_VERS_RELEASE)
diff --git a/src/Makefile.in b/src/Makefile.in
index 033180a..f5d89b0 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -525,7 +525,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog
# Add libtool shared library version numbers to the HDF5 library
# See libtool versioning documentation online.
LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 151
+LT_VERS_REVISION = 152
LT_VERS_AGE = 0
H5detect_CFLAGS = -g $(AM_CFLAGS)
diff --git a/tools/h5dump/CMakeLists.txt b/tools/h5dump/CMakeLists.txt
index b13bab5..16ee803 100644
--- a/tools/h5dump/CMakeLists.txt
+++ b/tools/h5dump/CMakeLists.txt
@@ -58,6 +58,8 @@ IF (BUILD_TESTING)
${HDF5_TOOLS_SRC_DIR}/testfiles/tall-4s.ddl
${HDF5_TOOLS_SRC_DIR}/testfiles/tall-5s.ddl
${HDF5_TOOLS_SRC_DIR}/testfiles/tall-6.ddl
+ ${HDF5_TOOLS_SRC_DIR}/testfiles/tall-7.ddl
+ ${HDF5_TOOLS_SRC_DIR}/testfiles/tall-7N.ddl
${HDF5_TOOLS_SRC_DIR}/testfiles/tallfilters.ddl
${HDF5_TOOLS_SRC_DIR}/testfiles/tarray1.ddl
${HDF5_TOOLS_SRC_DIR}/testfiles/tarray1_big.ddl
@@ -751,6 +753,39 @@ IF (BUILD_TESTING)
ENDIF (HDF5_ENABLE_USING_MEMCHECKER)
ENDMACRO (ADD_H5_TEST file)
+ MACRO (ADD_H5_TEST_N resultfile resultcode)
+ # If using memchecker add tests without using scripts
+ IF (HDF5_ENABLE_USING_MEMCHECKER)
+ ADD_TEST (NAME H5DUMP-N-${resultfile} COMMAND $<TARGET_FILE:h5dump> ${ARGN})
+ SET_TESTS_PROPERTIES (H5DUMP-N-${resultfile} PROPERTIES WORKING_DIRECTORY "${PROJECT_BINARY_DIR}/testfiles/std")
+ IF (NOT ${resultcode} STREQUAL "0")
+ SET_TESTS_PROPERTIES (H5DUMP-N-${resultfile} PROPERTIES WILL_FAIL "true")
+ ENDIF (NOT ${resultcode} STREQUAL "0")
+ IF (NOT "${last_test}" STREQUAL "")
+ SET_TESTS_PROPERTIES (H5DUMP-N-${resultfile} PROPERTIES DEPENDS ${last_test})
+ ENDIF (NOT "${last_test}" STREQUAL "")
+ ELSE (HDF5_ENABLE_USING_MEMCHECKER)
+ ADD_TEST (
+ NAME H5DUMP-N-${resultfile}-clear-objects
+ COMMAND ${CMAKE_COMMAND}
+ -E remove ${resultfile}-N.bin ${resultfile}-N.out ${resultfile}-N.out.err
+ )
+ SET_TESTS_PROPERTIES (H5DUMP-N-${resultfile}-clear-objects PROPERTIES WORKING_DIRECTORY "${PROJECT_BINARY_DIR}/testfiles/std")
+ ADD_TEST (
+ NAME H5DUMP-N-${resultfile}
+ COMMAND "${CMAKE_COMMAND}"
+ -D "TEST_PROGRAM=$<TARGET_FILE:h5dump>"
+ -D "TEST_ARGS:STRING=${ARGN}"
+ -D "TEST_FOLDER=${PROJECT_BINARY_DIR}/testfiles/std"
+ -D "TEST_OUTPUT=${resultfile}-N.out"
+ -D "TEST_EXPECT=${resultcode}"
+ -D "TEST_REFERENCE=${resultfile}.ddl"
+ -P "${HDF5_RESOURCES_DIR}/runTest.cmake"
+ )
+ SET_TESTS_PROPERTIES (H5DUMP-N-${resultfile} PROPERTIES DEPENDS "H5DUMP-N-${resultfile}-clear-objects")
+ ENDIF (HDF5_ENABLE_USING_MEMCHECKER)
+ ENDMACRO (ADD_H5_TEST_N file)
+
MACRO (ADD_H5_TEST_EXPORT resultfile targetfile resultcode)
# If using memchecker add tests without using scripts
IF (HDF5_ENABLE_USING_MEMCHECKER)
@@ -1086,6 +1121,10 @@ IF (BUILD_TESTING)
tall-6.txt
tall-6.out
tall-6.out.err
+ tall-7.out
+ tall-7.out.err
+ tall-7N.out
+ tall-7N.out.err
tallfilters.out
tallfilters.out.err
tarray1.out
@@ -1414,6 +1453,7 @@ IF (BUILD_TESTING)
ADD_H5_TEST (tattr-1 0 --enable-error-stack tattr.h5)
# test for displaying the selected attributes of string type and scalar space
ADD_H5_TEST (tattr-2 0 --enable-error-stack -a /\\\\/attr1 --attribute /attr4 --attribute=/attr5 tattr.h5)
+ ADD_H5_TEST_N (tattr-2 0 --enable-error-stack -N /\\\\/attr1 --any_object /attr4 --any_object=/attr5 tattr.h5)
# test for header and error messages
ADD_H5ERR_MASK_TEST (tattr-3 1 --enable-error-stack --header -a /attr2 --attribute=/attr tattr.h5)
# test for displaying attributes in shared datatype (also in group and dataset)
@@ -1426,6 +1466,7 @@ IF (BUILD_TESTING)
ADD_H5_TEST (tudlink-1 0 --enable-error-stack tudlink.h5)
# test for displaying the selected link
ADD_H5_TEST (tslink-2 0 --enable-error-stack -l slink2 tslink.h5)
+ ADD_H5_TEST_N (tslink-2 0 --enable-error-stack -N slink2 tslink.h5)
ADD_H5_TEST (tudlink-2 0 --enable-error-stack -l udlink2 tudlink.h5)
# test for displaying dangling soft links
ADD_H5ERR_MASK_TEST (tslink-D 0 --enable-error-stack -d /slink1 tslink.h5)
@@ -1435,12 +1476,15 @@ IF (BUILD_TESTING)
ADD_H5_TEST (thlink-2 0 --enable-error-stack -d /g1/dset2 --dataset /dset1 --dataset=/g1/g1.1/dset3 thlink.h5)
ADD_H5_TEST (thlink-3 0 --enable-error-stack -d /g1/g1.1/dset3 --dataset /g1/dset2 --dataset=/dset1 thlink.h5)
ADD_H5_TEST (thlink-4 0 --enable-error-stack -g /g1 thlink.h5)
+ ADD_H5_TEST_N (thlink-4 0 --enable-error-stack -N /g1 thlink.h5)
ADD_H5_TEST (thlink-5 0 --enable-error-stack -d /dset1 -g /g2 -d /g1/dset2 thlink.h5)
+ ADD_H5_TEST_N (thlink-5 0 --enable-error-stack -N /dset1 -N /g2 -N /g1/dset2 thlink.h5)
# tests for compound data types
ADD_H5_TEST (tcomp-1 0 --enable-error-stack tcompound.h5)
# test for named data types
ADD_H5_TEST (tcomp-2 0 --enable-error-stack -t /type1 --datatype /type2 --datatype=/group1/type3 tcompound.h5)
+ ADD_H5_TEST_N (tcomp-2 0 --enable-error-stack -N /type1 --any_object /type2 --any_object=/group1/type3 tcompound.h5)
# test for unamed type
ADD_H5ERR_MASK_TEST (tcomp-3 0 "--enable-error-stack;-t;/#6632;-g;/group2;tcompound.h5")
# test complicated compound datatype
@@ -1454,6 +1498,9 @@ IF (BUILD_TESTING)
ADD_H5ERR_MASK_TEST (tall-1 0 --enable-error-stack tall.h5)
ADD_H5_TEST (tall-2 0 --enable-error-stack --header -g /g1/g1.1 -a attr2 tall.h5)
ADD_H5_TEST (tall-3 0 --enable-error-stack -d /g2/dset2.1 -l /g1/g1.2/g1.2.1/slink tall.h5)
+ ADD_H5_TEST_N (tall-3 0 --enable-error-stack -N /g2/dset2.1 -N /g1/g1.2/g1.2.1/slink tall.h5)
+ ADD_H5_TEST (tall-7 0 --enable-error-stack -a attr1 tall.h5)
+ ADD_H5_TEST (tall-7N 0 --enable-error-stack -N attr1 tall.h5)
# test for loop detection
ADD_H5_TEST (tloop-1 0 --enable-error-stack tloop.h5)
diff --git a/tools/h5dump/h5dump.c b/tools/h5dump/h5dump.c
index 6218631..618318c 100644
--- a/tools/h5dump/h5dump.c
+++ b/tools/h5dump/h5dump.c
@@ -71,7 +71,7 @@ struct handler_t {
*/
/* The following initialization makes use of C language cancatenating */
/* "xxx" "yyy" into "xxxyyy". */
-static const char *s_opts = "hn*peyBHirVa:c:d:f:g:k:l:t:w:xD:uX:o*b*F:s:S:A*q:z:m:RECM:O*";
+static const char *s_opts = "hn*peyBHirVa:c:d:f:g:k:l:t:w:xD:uX:o*b*F:s:S:A*q:z:m:RECM:O*N:";
static struct long_options l_opts[] = {
{ "help", no_arg, 'h' },
{ "hel", no_arg, 'h' },
@@ -188,6 +188,7 @@ static struct long_options l_opts[] = {
{ "packed-bits", require_arg, 'M' },
{ "no-compact-subset", no_arg, 'C' },
{ "ddl", optional_arg, 'O' },
+ { "any_object", require_arg, 'N' },
{ NULL, 0, '\0' }
};
@@ -231,20 +232,6 @@ usage(const char *prog)
PRINTVALSTREAM(rawoutstream, " OPTIONS\n");
PRINTVALSTREAM(rawoutstream, " -h, --help Print a usage message and exit\n");
PRINTVALSTREAM(rawoutstream, " -V, --version Print version number and exit\n");
- PRINTVALSTREAM(rawoutstream, "--------------- Formatting Options ---------------\n");
- PRINTVALSTREAM(rawoutstream, " -e, --escape Escape non printing characters\n");
- PRINTVALSTREAM(rawoutstream, " -r, --string Print 1-byte integer datasets as ASCII\n");
- PRINTVALSTREAM(rawoutstream, " -y, --noindex Do not print array indices with the data\n");
- PRINTVALSTREAM(rawoutstream, " -m T, --format=T Set the floating point output format\n");
- PRINTVALSTREAM(rawoutstream, " -q Q, --sort_by=Q Sort groups and attributes by index Q\n");
- PRINTVALSTREAM(rawoutstream, " -z Z, --sort_order=Z Sort groups and attributes by order Z\n");
- PRINTVALSTREAM(rawoutstream, " --enable-error-stack Prints messages from the HDF5 error stack as they\n");
- PRINTVALSTREAM(rawoutstream, " occur.\n");
- PRINTVALSTREAM(rawoutstream, " --no-compact-subset Disable compact form of subsetting and allow the use\n");
- PRINTVALSTREAM(rawoutstream, " of \"[\" in dataset names.\n");
- PRINTVALSTREAM(rawoutstream, " -w N, --width=N Set the number of columns of output. A value of 0 (zero)\n");
- PRINTVALSTREAM(rawoutstream, " sets the number of columns to the maximum (65535).\n");
- PRINTVALSTREAM(rawoutstream, " Default width is 80 columns.\n");
PRINTVALSTREAM(rawoutstream, "--------------- File Options ---------------\n");
PRINTVALSTREAM(rawoutstream, " -n, --contents Print a list of the file contents and exit\n");
PRINTVALSTREAM(rawoutstream, " Optional value 1 also prints attributes.\n");
@@ -264,6 +251,8 @@ usage(const char *prog)
PRINTVALSTREAM(rawoutstream, " -g P, --group=P Print the specified group and all members\n");
PRINTVALSTREAM(rawoutstream, " -l P, --soft-link=P Print the value(s) of the specified soft link\n");
PRINTVALSTREAM(rawoutstream, " -t P, --datatype=P Print the specified named datatype\n");
+ PRINTVALSTREAM(rawoutstream, " -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P\n");
+ PRINTVALSTREAM(rawoutstream, " P can be the absolute path or just a relative path.\n");
PRINTVALSTREAM(rawoutstream, " -A, --onlyattr Print the header and value of attributes\n");
PRINTVALSTREAM(rawoutstream, " Optional value 0 suppresses printing attributes.\n");
PRINTVALSTREAM(rawoutstream, "--------------- Object Property Options ---------------\n");
@@ -276,6 +265,20 @@ usage(const char *prog)
PRINTVALSTREAM(rawoutstream, " the data value and length is the number of bits of\n");
PRINTVALSTREAM(rawoutstream, " the mask.\n");
PRINTVALSTREAM(rawoutstream, " -R, --region Print dataset pointed by region references\n");
+ PRINTVALSTREAM(rawoutstream, "--------------- Formatting Options ---------------\n");
+ PRINTVALSTREAM(rawoutstream, " -e, --escape Escape non printing characters\n");
+ PRINTVALSTREAM(rawoutstream, " -r, --string Print 1-byte integer datasets as ASCII\n");
+ PRINTVALSTREAM(rawoutstream, " -y, --noindex Do not print array indices with the data\n");
+ PRINTVALSTREAM(rawoutstream, " -m T, --format=T Set the floating point output format\n");
+ PRINTVALSTREAM(rawoutstream, " -q Q, --sort_by=Q Sort groups and attributes by index Q\n");
+ PRINTVALSTREAM(rawoutstream, " -z Z, --sort_order=Z Sort groups and attributes by order Z\n");
+ PRINTVALSTREAM(rawoutstream, " --enable-error-stack Prints messages from the HDF5 error stack as they\n");
+ PRINTVALSTREAM(rawoutstream, " occur.\n");
+ PRINTVALSTREAM(rawoutstream, " --no-compact-subset Disable compact form of subsetting and allow the use\n");
+ PRINTVALSTREAM(rawoutstream, " of \"[\" in dataset names.\n");
+ PRINTVALSTREAM(rawoutstream, " -w N, --width=N Set the number of columns of output. A value of 0 (zero)\n");
+ PRINTVALSTREAM(rawoutstream, " sets the number of columns to the maximum (65535).\n");
+ PRINTVALSTREAM(rawoutstream, " Default width is 80 columns.\n");
PRINTVALSTREAM(rawoutstream, "--------------- XML Options ---------------\n");
PRINTVALSTREAM(rawoutstream, " -x, --xml Output in XML using Schema\n");
PRINTVALSTREAM(rawoutstream, " -u, --use-dtd Output in XML using DTD\n");
@@ -306,15 +309,7 @@ usage(const char *prog)
PRINTVALSTREAM(rawoutstream, " the file driver flag, the file will be opened with each driver in\n");
PRINTVALSTREAM(rawoutstream, " turn and in the order specified above until one driver succeeds\n");
PRINTVALSTREAM(rawoutstream, " in opening the file.\n");
- PRINTVALSTREAM(rawoutstream, " These are the letters that are appended to the file name(without .h5) when opening\n");
- PRINTVALSTREAM(rawoutstream, " names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:\n");
- PRINTVALSTREAM(rawoutstream, " m: All meta data when using the split driver.\n");
- PRINTVALSTREAM(rawoutstream, " s: The userblock, superblock, and driver info block\n");
- PRINTVALSTREAM(rawoutstream, " b: B-tree nodes\n");
- PRINTVALSTREAM(rawoutstream, " r: Dataset raw data\n");
- PRINTVALSTREAM(rawoutstream, " g: Global heap\n");
- PRINTVALSTREAM(rawoutstream, " l: local heap (object names)\n");
- PRINTVALSTREAM(rawoutstream, " o: object headers\n");
+ PRINTVALSTREAM(rawoutstream, " See examples below for family, split, and multi driver special file name usage.\n");
PRINTVALSTREAM(rawoutstream, "\n");
PRINTVALSTREAM(rawoutstream, " F - is a filename.\n");
PRINTVALSTREAM(rawoutstream, " P - is the full path from the root group to the object.\n");
@@ -360,6 +355,14 @@ usage(const char *prog)
PRINTVALSTREAM(rawoutstream, "\n");
PRINTVALSTREAM(rawoutstream, " h5dump -d /foo -f split splitfile\n");
PRINTVALSTREAM(rawoutstream, "\n");
+ PRINTVALSTREAM(rawoutstream, " 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5\n");
+ PRINTVALSTREAM(rawoutstream, "\n");
+ PRINTVALSTREAM(rawoutstream, " h5dump -d /foo -f multi mf\n");
+ PRINTVALSTREAM(rawoutstream, "\n");
+ PRINTVALSTREAM(rawoutstream, " 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5\n");
+ PRINTVALSTREAM(rawoutstream, "\n");
+ PRINTVALSTREAM(rawoutstream, " h5dump -d /foo -f family fam%%05d.h5\n");
+ PRINTVALSTREAM(rawoutstream, "\n");
}
@@ -958,6 +961,18 @@ parse_start:
}
last_was_dset = FALSE;
break;
+ case 'N':
+ display_all = 0;
+
+ for (i = 0; i < argc; i++)
+ if (!hand[i].func) {
+ hand[i].func = handle_paths;
+ hand[i].obj = HDstrdup(opt_arg);
+ break;
+ }
+
+ last_was_dset = FALSE;
+ break;
case 'a':
display_all = 0;
diff --git a/tools/h5dump/h5dump_ddl.c b/tools/h5dump/h5dump_ddl.c
index bb54e3f..765cee4 100644
--- a/tools/h5dump/h5dump_ddl.c
+++ b/tools/h5dump/h5dump_ddl.c
@@ -24,6 +24,16 @@
#include "h5dump_extern.h"
#include "h5dump_ddl.h"
+typedef struct {
+ hid_t fid; /* File ID being traversed */
+ char *op_name; /* Object name wanted */
+} trav_handle_udata_t;
+
+typedef struct {
+ char *path; /* Path of object being searched */
+ char *op_name; /* Object name wanted */
+} trav_attr_udata_t;
+
/*-------------------------------------------------------------------------
* Function: dump_datatype
*
@@ -1288,6 +1298,203 @@ dump_fcontents(hid_t fid)
PRINTSTREAM(rawoutstream, " %s\n",END);
}
+static herr_t
+attr_search(hid_t oid, const char *attr_name, const H5A_info_t UNUSED *ainfo, void *_op_data)
+{
+ herr_t ret = SUCCEED;
+ int i;
+ int j;
+ int k;
+ char *obj_attrname;
+ char *obj_op_name;
+ char *obj_name;
+ trav_attr_udata_t *attr_data = (trav_attr_udata_t*)_op_data;
+ char *buf = attr_data->path;
+ char *op_name = attr_data->op_name;
+
+ j = (int)HDstrlen(op_name) - 1;
+ /* find the last / */
+ while(j >= 0) {
+ if (op_name[j] == '/' && (j==0 || (j>0 && op_name[j-1]!='\\')))
+ break;
+ j--;
+ }
+
+ obj_op_name = h5tools_str_replace(op_name + j + 1, "\\/", "/");
+
+ if(obj_op_name == NULL) {
+ h5tools_setstatus(EXIT_FAILURE);
+ ret = FAIL;
+ }
+ else {
+ if(HDstrcmp(attr_name, obj_op_name)==0) {
+ /* object name */
+ i = (int)HDstrlen(buf);
+ j = (int)HDstrlen(op_name);
+ k = (size_t)i + 1 + (size_t)j + 1 + 2;
+ obj_name = (char *)HDmalloc((size_t)k);
+ if(obj_name == NULL) {
+ h5tools_setstatus(EXIT_FAILURE);
+ ret = FAIL;
+ }
+ else {
+ HDmemset(obj_name, '\0', (size_t)k);
+ if(op_name[0] != '/') {
+ HDstrncat(obj_name, buf, (size_t)i + 1);
+ if(buf[i-1] != '/')
+ HDstrncat(obj_name, "/", 2);
+ }
+ HDstrncat(obj_name, op_name, (size_t)j + 1);
+
+ handle_attributes(oid, obj_name, NULL, 0, NULL);
+ HDfree(obj_name);
+ }
+ }
+ HDfree(obj_op_name);
+ }
+ return ret;
+} /* end attr_search() */
+
+static herr_t
+obj_search(const char *path, const H5O_info_t *oi, const char *already_visited, void *_op_data)
+{
+ trav_handle_udata_t *handle_data = (trav_handle_udata_t*)_op_data;
+ char *op_name = (char*)handle_data->op_name;
+
+ trav_attr_udata_t attr_data;
+ attr_data.path = (char*)path;
+ attr_data.op_name = op_name;
+ H5Aiterate_by_name(handle_data->fid, path, H5_INDEX_NAME, H5_ITER_INC, NULL, attr_search, (void*)&attr_data, H5P_DEFAULT);
+
+ if(HDstrcmp(path, op_name)==0) {
+ switch(oi->type) {
+ case H5O_TYPE_GROUP:
+ handle_groups(handle_data->fid, path, NULL, 0, NULL);
+ break;
+ case H5O_TYPE_DATASET:
+ handle_datasets(handle_data->fid, path, NULL, 0, NULL);
+ break;
+ case H5O_TYPE_NAMED_DATATYPE:
+ handle_datatypes(handle_data->fid, path, NULL, 0, NULL);
+ break;
+ case H5O_TYPE_UNKNOWN:
+ case H5O_TYPE_NTYPES:
+ default:
+ error_msg("unknown object type value\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ } /* end switch */
+ }
+
+ return 0;
+} /* end obj_search() */
+
+static herr_t
+lnk_search(const char *path, const H5L_info_t *li, void *_op_data)
+{
+ int search_len;
+ int k;
+ char *search_name;
+ trav_handle_udata_t *handle_data = (trav_handle_udata_t*)_op_data;
+ char *op_name = (char*)handle_data->op_name;
+
+ search_len = HDstrlen(op_name);
+ if(search_len > 0 && op_name[0] != '/') {
+ k = 2;
+ }
+ else
+ k = 1;
+ search_name = (char *)HDmalloc(search_len + k);
+ if(search_name == NULL) {
+ error_msg("creating temporary link\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ }
+ else {
+ if (k == 2) {
+ HDstrcpy(search_name, "/");
+ HDstrncat(search_name, op_name, (size_t)search_len + 1);
+ }
+ else
+ HDstrncpy(search_name, op_name, (size_t)search_len + 1);
+ search_name[search_len + k - 1] = '\0';
+
+ if(HDstrcmp(path, search_name) == 0) {
+ switch(li->type) {
+ case H5L_TYPE_SOFT:
+ case H5L_TYPE_EXTERNAL:
+ handle_links(handle_data->fid, op_name, NULL, 0, NULL);
+ break;
+
+ case H5L_TYPE_HARD:
+ case H5L_TYPE_MAX:
+ case H5L_TYPE_ERROR:
+ default:
+ error_msg("unknown link type value\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ break;
+ } /* end switch() */
+ }
+ HDfree(search_name);
+ }
+ return 0;
+} /* end lnk_search() */
+
+/*-------------------------------------------------------------------------
+ * Function: handle_paths
+ *
+ * Purpose: Handle objects from the command.
+ *
+ * Return: void
+ *
+ *-------------------------------------------------------------------------
+ */
+void
+handle_paths(hid_t fid, const char *path_name, void* data, int pe, const char *display_name)
+{
+ hid_t obj_id = -1;
+ hid_t gid = -1;
+ H5O_info_t oinfo;
+
+ if((gid = H5Gopen2(fid, "/", H5P_DEFAULT)) < 0) {
+ error_msg("unable to open root group\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ }
+ else {
+ hid_t gcpl_id;
+ unsigned crt_order_flags;
+ unsigned attr_crt_order_flags;
+ trav_handle_udata_t handle_udata; /* User data for traversal */
+
+ if ((gcpl_id = H5Gget_create_plist(gid)) < 0) {
+ error_msg("error in getting group creation property list ID\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ }
+
+ /* query the group creation properties for attributes */
+ if (H5Pget_attr_creation_order(gcpl_id, &attr_crt_order_flags) < 0) {
+ error_msg("error in getting group creation properties\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ }
+
+ /* query the group creation properties */
+ if(H5Pget_link_creation_order(gcpl_id, &crt_order_flags) < 0) {
+ error_msg("error in getting group creation properties\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ }
+
+ if(H5Pclose(gcpl_id) < 0) {
+ error_msg("error in closing group creation property list ID\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ }
+
+ handle_udata.fid = fid;
+ handle_udata.op_name = (char*)path_name;
+ if(h5trav_visit(fid, "/", TRUE, TRUE, obj_search, lnk_search, &handle_udata) < 0) {
+ error_msg("error traversing information\n");
+ h5tools_setstatus(EXIT_FAILURE);
+ }
+ }
+}
+
/*-------------------------------------------------------------------------
* Function: handle_attributes
*
@@ -1363,7 +1570,6 @@ handle_attributes(hid_t fid, const char *attr, void UNUSED * data, int UNUSED pe
attr_name = h5tools_str_replace(attr + j + 1, "\\/", "/");
-
/* handle error case: cannot open the object with the attribute */
if((oid = H5Oopen(fid, obj_name, H5P_DEFAULT)) < 0) {
/* setup */
diff --git a/tools/h5dump/h5dump_ddl.h b/tools/h5dump/h5dump_ddl.h
index c769194..4511f7b 100644
--- a/tools/h5dump/h5dump_ddl.h
+++ b/tools/h5dump/h5dump_ddl.h
@@ -37,6 +37,7 @@ void dump_fcontents(hid_t fid);
/* callback function used by H5Aiterate2() */
herr_t dump_attr_cb(hid_t loc_id, const char *attr_name, const H5A_info_t *info, void *_op_data);
+void handle_paths(hid_t fid, const char *path_name, void *data, int pe, const char *display_name);
void handle_datasets(hid_t fid, const char *dset, void *data, int pe, const char *display_name);
void handle_attributes(hid_t fid, const char *attr, void UNUSED * data, int UNUSED pe, const char UNUSED *display_name);
void handle_groups(hid_t fid, const char *group, void UNUSED *data, int pe, const char *display_name);
diff --git a/tools/h5dump/testh5dump.sh.in b/tools/h5dump/testh5dump.sh.in
index 0e3cfda..fc79d28 100644
--- a/tools/h5dump/testh5dump.sh.in
+++ b/tools/h5dump/testh5dump.sh.in
@@ -182,6 +182,8 @@ $SRC_H5DUMP_TESTFILES/tall-4s.ddl
$SRC_H5DUMP_TESTFILES/tall-5s.ddl
$SRC_H5DUMP_TESTFILES/tall-6.ddl
$SRC_H5DUMP_TESTFILES/tall-6.exp
+$SRC_H5DUMP_TESTFILES/tall-7.ddl
+$SRC_H5DUMP_TESTFILES/tall-7N.ddl
$SRC_H5DUMP_TESTFILES/tallfilters.ddl
$SRC_H5DUMP_TESTFILES/tarray1.ddl
$SRC_H5DUMP_TESTFILES/tarray1_big.ddl
@@ -912,6 +914,7 @@ TOOLTEST4 tdset-2.ddl --enable-error-stack -H -d dset1 -d /dset2 --dataset=dset3
TOOLTEST tattr-1.ddl --enable-error-stack tattr.h5
# test for displaying the selected attributes of string type and scalar space
TOOLTEST tattr-2.ddl --enable-error-stack -a "/\/attr1" --attribute /attr4 --attribute=/attr5 tattr.h5
+TOOLTEST tattr-2.ddl --enable-error-stack -N "/\/attr1" --any_object /attr4 --any_object=/attr5 tattr.h5
# test for header and error messages
TOOLTEST4 tattr-3.ddl --enable-error-stack --header -a /attr2 --attribute=/attr tattr.h5
# test for displaying at least 9 attributes on root from a BE machine
@@ -924,6 +927,7 @@ TOOLTEST tslink-1.ddl --enable-error-stack tslink.h5
TOOLTEST tudlink-1.ddl --enable-error-stack tudlink.h5
# test for displaying the selected link
TOOLTEST tslink-2.ddl --enable-error-stack -l slink2 tslink.h5
+TOOLTEST tslink-2.ddl --enable-error-stack -N slink2 tslink.h5
TOOLTEST tudlink-2.ddl --enable-error-stack -l udlink2 tudlink.h5
# test for displaying dangling soft links
TOOLTEST4 tslink-D.ddl --enable-error-stack -d /slink1 tslink.h5
@@ -933,12 +937,15 @@ TOOLTEST thlink-1.ddl --enable-error-stack thlink.h5
TOOLTEST thlink-2.ddl --enable-error-stack -d /g1/dset2 --dataset /dset1 --dataset=/g1/g1.1/dset3 thlink.h5
TOOLTEST thlink-3.ddl --enable-error-stack -d /g1/g1.1/dset3 --dataset /g1/dset2 --dataset=/dset1 thlink.h5
TOOLTEST thlink-4.ddl --enable-error-stack -g /g1 thlink.h5
+TOOLTEST thlink-4.ddl --enable-error-stack -N /g1 thlink.h5
TOOLTEST thlink-5.ddl --enable-error-stack -d /dset1 -g /g2 -d /g1/dset2 thlink.h5
+TOOLTEST thlink-5.ddl --enable-error-stack -N /dset1 -N /g2 -N /g1/dset2 thlink.h5
# tests for compound data types
TOOLTEST tcomp-1.ddl --enable-error-stack tcompound.h5
# test for named data types
TOOLTEST tcomp-2.ddl --enable-error-stack -t /type1 --datatype /type2 --datatype=/group1/type3 tcompound.h5
+TOOLTEST tcomp-2.ddl --enable-error-stack -N /type1 --any_object /type2 --any_object=/group1/type3 tcompound.h5
# test for unamed type
TOOLTEST4 tcomp-3.ddl --enable-error-stack -t /#6632 -g /group2 tcompound.h5
# test complicated compound datatype
@@ -952,6 +959,9 @@ TOOLTEST tnestedcmpddt.ddl --enable-error-stack tnestedcmpddt.h5
TOOLTEST4 tall-1.ddl --enable-error-stack tall.h5
TOOLTEST tall-2.ddl --enable-error-stack --header -g /g1/g1.1 -a attr2 tall.h5
TOOLTEST tall-3.ddl --enable-error-stack -d /g2/dset2.1 -l /g1/g1.2/g1.2.1/slink tall.h5
+TOOLTEST tall-3.ddl --enable-error-stack -N /g2/dset2.1 -N /g1/g1.2/g1.2.1/slink tall.h5
+TOOLTEST tall-7.ddl --enable-error-stack -a attr1 tall.h5
+TOOLTEST tall-7N.ddl --enable-error-stack -N attr1 tall.h5
# test for loop detection
TOOLTEST tloop-1.ddl --enable-error-stack tloop.h5
diff --git a/tools/testfiles/h5dump-help.txt b/tools/testfiles/h5dump-help.txt
index 3a4864e..2a59a32 100644
--- a/tools/testfiles/h5dump-help.txt
+++ b/tools/testfiles/h5dump-help.txt
@@ -2,20 +2,6 @@ usage: h5dump [OPTIONS] files
OPTIONS
-h, --help Print a usage message and exit
-V, --version Print version number and exit
---------------- Formatting Options ---------------
- -e, --escape Escape non printing characters
- -r, --string Print 1-byte integer datasets as ASCII
- -y, --noindex Do not print array indices with the data
- -m T, --format=T Set the floating point output format
- -q Q, --sort_by=Q Sort groups and attributes by index Q
- -z Z, --sort_order=Z Sort groups and attributes by order Z
- --enable-error-stack Prints messages from the HDF5 error stack as they
- occur.
- --no-compact-subset Disable compact form of subsetting and allow the use
- of "[" in dataset names.
- -w N, --width=N Set the number of columns of output. A value of 0 (zero)
- sets the number of columns to the maximum (65535).
- Default width is 80 columns.
--------------- File Options ---------------
-n, --contents Print a list of the file contents and exit
Optional value 1 also prints attributes.
@@ -35,6 +21,8 @@ usage: h5dump [OPTIONS] files
-g P, --group=P Print the specified group and all members
-l P, --soft-link=P Print the value(s) of the specified soft link
-t P, --datatype=P Print the specified named datatype
+ -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P
+ P can be the absolute path or just a relative path.
-A, --onlyattr Print the header and value of attributes
Optional value 0 suppresses printing attributes.
--------------- Object Property Options ---------------
@@ -47,6 +35,20 @@ usage: h5dump [OPTIONS] files
the data value and length is the number of bits of
the mask.
-R, --region Print dataset pointed by region references
+--------------- Formatting Options ---------------
+ -e, --escape Escape non printing characters
+ -r, --string Print 1-byte integer datasets as ASCII
+ -y, --noindex Do not print array indices with the data
+ -m T, --format=T Set the floating point output format
+ -q Q, --sort_by=Q Sort groups and attributes by index Q
+ -z Z, --sort_order=Z Sort groups and attributes by order Z
+ --enable-error-stack Prints messages from the HDF5 error stack as they
+ occur.
+ --no-compact-subset Disable compact form of subsetting and allow the use
+ of "[" in dataset names.
+ -w N, --width=N Set the number of columns of output. A value of 0 (zero)
+ sets the number of columns to the maximum (65535).
+ Default width is 80 columns.
--------------- XML Options ---------------
-x, --xml Output in XML using Schema
-u, --use-dtd Output in XML using DTD
@@ -77,15 +79,7 @@ usage: h5dump [OPTIONS] files
the file driver flag, the file will be opened with each driver in
turn and in the order specified above until one driver succeeds
in opening the file.
- These are the letters that are appended to the file name(without .h5) when opening
- names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:
- m: All meta data when using the split driver.
- s: The userblock, superblock, and driver info block
- b: B-tree nodes
- r: Dataset raw data
- g: Global heap
- l: local heap (object names)
- o: object headers
+ See examples below for family, split, and multi driver special file name usage.
F - is a filename.
P - is the full path from the root group to the object.
@@ -131,3 +125,11 @@ usage: h5dump [OPTIONS] files
h5dump -d /foo -f split splitfile
+ 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5
+
+ h5dump -d /foo -f multi mf
+
+ 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5
+
+ h5dump -d /foo -f family fam%05d.h5
+
diff --git a/tools/testfiles/tall-7.ddl b/tools/testfiles/tall-7.ddl
new file mode 100644
index 0000000..f0ad5ea
--- /dev/null
+++ b/tools/testfiles/tall-7.ddl
@@ -0,0 +1,9 @@
+HDF5 "tall.h5" {
+ATTRIBUTE "attr1" {
+ DATATYPE H5T_STD_I8BE
+ DATASPACE SIMPLE { ( 10 ) / ( 10 ) }
+ DATA {
+ (0): 97, 98, 99, 100, 101, 102, 103, 104, 105, 0
+ }
+}
+}
diff --git a/tools/testfiles/tall-7N.ddl b/tools/testfiles/tall-7N.ddl
new file mode 100644
index 0000000..cba5774
--- /dev/null
+++ b/tools/testfiles/tall-7N.ddl
@@ -0,0 +1,17 @@
+HDF5 "tall.h5" {
+ATTRIBUTE "attr1" {
+ DATATYPE H5T_STD_I8BE
+ DATASPACE SIMPLE { ( 10 ) / ( 10 ) }
+ DATA {
+ (0): 97, 98, 99, 100, 101, 102, 103, 104, 105, 0
+ }
+}
+ATTRIBUTE "attr1" {
+ DATATYPE H5T_STD_I8BE
+ DATASPACE SIMPLE { ( 27 ) / ( 27 ) }
+ DATA {
+ (0): 49, 115, 116, 32, 97, 116, 116, 114, 105, 98, 117, 116, 101, 32, 111,
+ (15): 102, 32, 100, 115, 101, 116, 49, 46, 49, 46, 49, 0
+ }
+}
+}
diff --git a/tools/testfiles/tnofilename-with-packed-bits.ddl b/tools/testfiles/tnofilename-with-packed-bits.ddl
index e8df31c..1ad1249 100644
--- a/tools/testfiles/tnofilename-with-packed-bits.ddl
+++ b/tools/testfiles/tnofilename-with-packed-bits.ddl
@@ -2,20 +2,6 @@ usage: h5dump [OPTIONS] files
OPTIONS
-h, --help Print a usage message and exit
-V, --version Print version number and exit
---------------- Formatting Options ---------------
- -e, --escape Escape non printing characters
- -r, --string Print 1-byte integer datasets as ASCII
- -y, --noindex Do not print array indices with the data
- -m T, --format=T Set the floating point output format
- -q Q, --sort_by=Q Sort groups and attributes by index Q
- -z Z, --sort_order=Z Sort groups and attributes by order Z
- --enable-error-stack Prints messages from the HDF5 error stack as they
- occur.
- --no-compact-subset Disable compact form of subsetting and allow the use
- of "[" in dataset names.
- -w N, --width=N Set the number of columns of output. A value of 0 (zero)
- sets the number of columns to the maximum (65535).
- Default width is 80 columns.
--------------- File Options ---------------
-n, --contents Print a list of the file contents and exit
Optional value 1 also prints attributes.
@@ -35,6 +21,8 @@ usage: h5dump [OPTIONS] files
-g P, --group=P Print the specified group and all members
-l P, --soft-link=P Print the value(s) of the specified soft link
-t P, --datatype=P Print the specified named datatype
+ -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P
+ P can be the absolute path or just a relative path.
-A, --onlyattr Print the header and value of attributes
Optional value 0 suppresses printing attributes.
--------------- Object Property Options ---------------
@@ -47,6 +35,20 @@ usage: h5dump [OPTIONS] files
the data value and length is the number of bits of
the mask.
-R, --region Print dataset pointed by region references
+--------------- Formatting Options ---------------
+ -e, --escape Escape non printing characters
+ -r, --string Print 1-byte integer datasets as ASCII
+ -y, --noindex Do not print array indices with the data
+ -m T, --format=T Set the floating point output format
+ -q Q, --sort_by=Q Sort groups and attributes by index Q
+ -z Z, --sort_order=Z Sort groups and attributes by order Z
+ --enable-error-stack Prints messages from the HDF5 error stack as they
+ occur.
+ --no-compact-subset Disable compact form of subsetting and allow the use
+ of "[" in dataset names.
+ -w N, --width=N Set the number of columns of output. A value of 0 (zero)
+ sets the number of columns to the maximum (65535).
+ Default width is 80 columns.
--------------- XML Options ---------------
-x, --xml Output in XML using Schema
-u, --use-dtd Output in XML using DTD
@@ -77,15 +79,7 @@ usage: h5dump [OPTIONS] files
the file driver flag, the file will be opened with each driver in
turn and in the order specified above until one driver succeeds
in opening the file.
- These are the letters that are appended to the file name(without .h5) when opening
- names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:
- m: All meta data when using the split driver.
- s: The userblock, superblock, and driver info block
- b: B-tree nodes
- r: Dataset raw data
- g: Global heap
- l: local heap (object names)
- o: object headers
+ See examples below for family, split, and multi driver special file name usage.
F - is a filename.
P - is the full path from the root group to the object.
@@ -131,4 +125,12 @@ usage: h5dump [OPTIONS] files
h5dump -d /foo -f split splitfile
+ 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5
+
+ h5dump -d /foo -f multi mf
+
+ 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5
+
+ h5dump -d /foo -f family fam%05d.h5
+
h5dump error: missing file name
diff --git a/tools/testfiles/tpbitsIncomplete.ddl b/tools/testfiles/tpbitsIncomplete.ddl
index c27e0ce..1468ad1 100644
--- a/tools/testfiles/tpbitsIncomplete.ddl
+++ b/tools/testfiles/tpbitsIncomplete.ddl
@@ -2,20 +2,6 @@ usage: h5dump [OPTIONS] files
OPTIONS
-h, --help Print a usage message and exit
-V, --version Print version number and exit
---------------- Formatting Options ---------------
- -e, --escape Escape non printing characters
- -r, --string Print 1-byte integer datasets as ASCII
- -y, --noindex Do not print array indices with the data
- -m T, --format=T Set the floating point output format
- -q Q, --sort_by=Q Sort groups and attributes by index Q
- -z Z, --sort_order=Z Sort groups and attributes by order Z
- --enable-error-stack Prints messages from the HDF5 error stack as they
- occur.
- --no-compact-subset Disable compact form of subsetting and allow the use
- of "[" in dataset names.
- -w N, --width=N Set the number of columns of output. A value of 0 (zero)
- sets the number of columns to the maximum (65535).
- Default width is 80 columns.
--------------- File Options ---------------
-n, --contents Print a list of the file contents and exit
Optional value 1 also prints attributes.
@@ -35,6 +21,8 @@ usage: h5dump [OPTIONS] files
-g P, --group=P Print the specified group and all members
-l P, --soft-link=P Print the value(s) of the specified soft link
-t P, --datatype=P Print the specified named datatype
+ -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P
+ P can be the absolute path or just a relative path.
-A, --onlyattr Print the header and value of attributes
Optional value 0 suppresses printing attributes.
--------------- Object Property Options ---------------
@@ -47,6 +35,20 @@ usage: h5dump [OPTIONS] files
the data value and length is the number of bits of
the mask.
-R, --region Print dataset pointed by region references
+--------------- Formatting Options ---------------
+ -e, --escape Escape non printing characters
+ -r, --string Print 1-byte integer datasets as ASCII
+ -y, --noindex Do not print array indices with the data
+ -m T, --format=T Set the floating point output format
+ -q Q, --sort_by=Q Sort groups and attributes by index Q
+ -z Z, --sort_order=Z Sort groups and attributes by order Z
+ --enable-error-stack Prints messages from the HDF5 error stack as they
+ occur.
+ --no-compact-subset Disable compact form of subsetting and allow the use
+ of "[" in dataset names.
+ -w N, --width=N Set the number of columns of output. A value of 0 (zero)
+ sets the number of columns to the maximum (65535).
+ Default width is 80 columns.
--------------- XML Options ---------------
-x, --xml Output in XML using Schema
-u, --use-dtd Output in XML using DTD
@@ -77,15 +79,7 @@ usage: h5dump [OPTIONS] files
the file driver flag, the file will be opened with each driver in
turn and in the order specified above until one driver succeeds
in opening the file.
- These are the letters that are appended to the file name(without .h5) when opening
- names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:
- m: All meta data when using the split driver.
- s: The userblock, superblock, and driver info block
- b: B-tree nodes
- r: Dataset raw data
- g: Global heap
- l: local heap (object names)
- o: object headers
+ See examples below for family, split, and multi driver special file name usage.
F - is a filename.
P - is the full path from the root group to the object.
@@ -131,4 +125,12 @@ usage: h5dump [OPTIONS] files
h5dump -d /foo -f split splitfile
+ 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5
+
+ h5dump -d /foo -f multi mf
+
+ 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5
+
+ h5dump -d /foo -f family fam%05d.h5
+
h5dump error: Bad mask list(0,2,2,1,0,2,2,)
diff --git a/tools/testfiles/tpbitsLengthExceeded.ddl b/tools/testfiles/tpbitsLengthExceeded.ddl
index 58c0e05..557f2a7 100644
--- a/tools/testfiles/tpbitsLengthExceeded.ddl
+++ b/tools/testfiles/tpbitsLengthExceeded.ddl
@@ -2,20 +2,6 @@ usage: h5dump [OPTIONS] files
OPTIONS
-h, --help Print a usage message and exit
-V, --version Print version number and exit
---------------- Formatting Options ---------------
- -e, --escape Escape non printing characters
- -r, --string Print 1-byte integer datasets as ASCII
- -y, --noindex Do not print array indices with the data
- -m T, --format=T Set the floating point output format
- -q Q, --sort_by=Q Sort groups and attributes by index Q
- -z Z, --sort_order=Z Sort groups and attributes by order Z
- --enable-error-stack Prints messages from the HDF5 error stack as they
- occur.
- --no-compact-subset Disable compact form of subsetting and allow the use
- of "[" in dataset names.
- -w N, --width=N Set the number of columns of output. A value of 0 (zero)
- sets the number of columns to the maximum (65535).
- Default width is 80 columns.
--------------- File Options ---------------
-n, --contents Print a list of the file contents and exit
Optional value 1 also prints attributes.
@@ -35,6 +21,8 @@ usage: h5dump [OPTIONS] files
-g P, --group=P Print the specified group and all members
-l P, --soft-link=P Print the value(s) of the specified soft link
-t P, --datatype=P Print the specified named datatype
+ -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P
+ P can be the absolute path or just a relative path.
-A, --onlyattr Print the header and value of attributes
Optional value 0 suppresses printing attributes.
--------------- Object Property Options ---------------
@@ -47,6 +35,20 @@ usage: h5dump [OPTIONS] files
the data value and length is the number of bits of
the mask.
-R, --region Print dataset pointed by region references
+--------------- Formatting Options ---------------
+ -e, --escape Escape non printing characters
+ -r, --string Print 1-byte integer datasets as ASCII
+ -y, --noindex Do not print array indices with the data
+ -m T, --format=T Set the floating point output format
+ -q Q, --sort_by=Q Sort groups and attributes by index Q
+ -z Z, --sort_order=Z Sort groups and attributes by order Z
+ --enable-error-stack Prints messages from the HDF5 error stack as they
+ occur.
+ --no-compact-subset Disable compact form of subsetting and allow the use
+ of "[" in dataset names.
+ -w N, --width=N Set the number of columns of output. A value of 0 (zero)
+ sets the number of columns to the maximum (65535).
+ Default width is 80 columns.
--------------- XML Options ---------------
-x, --xml Output in XML using Schema
-u, --use-dtd Output in XML using DTD
@@ -77,15 +79,7 @@ usage: h5dump [OPTIONS] files
the file driver flag, the file will be opened with each driver in
turn and in the order specified above until one driver succeeds
in opening the file.
- These are the letters that are appended to the file name(without .h5) when opening
- names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:
- m: All meta data when using the split driver.
- s: The userblock, superblock, and driver info block
- b: B-tree nodes
- r: Dataset raw data
- g: Global heap
- l: local heap (object names)
- o: object headers
+ See examples below for family, split, and multi driver special file name usage.
F - is a filename.
P - is the full path from the root group to the object.
@@ -131,4 +125,12 @@ usage: h5dump [OPTIONS] files
h5dump -d /foo -f split splitfile
+ 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5
+
+ h5dump -d /foo -f multi mf
+
+ 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5
+
+ h5dump -d /foo -f family fam%05d.h5
+
h5dump error: Packed Bit offset+length value(65) too large. Max is 64
diff --git a/tools/testfiles/tpbitsLengthPositive.ddl b/tools/testfiles/tpbitsLengthPositive.ddl
index 8a93cbc..342e4e8 100644
--- a/tools/testfiles/tpbitsLengthPositive.ddl
+++ b/tools/testfiles/tpbitsLengthPositive.ddl
@@ -2,20 +2,6 @@ usage: h5dump [OPTIONS] files
OPTIONS
-h, --help Print a usage message and exit
-V, --version Print version number and exit
---------------- Formatting Options ---------------
- -e, --escape Escape non printing characters
- -r, --string Print 1-byte integer datasets as ASCII
- -y, --noindex Do not print array indices with the data
- -m T, --format=T Set the floating point output format
- -q Q, --sort_by=Q Sort groups and attributes by index Q
- -z Z, --sort_order=Z Sort groups and attributes by order Z
- --enable-error-stack Prints messages from the HDF5 error stack as they
- occur.
- --no-compact-subset Disable compact form of subsetting and allow the use
- of "[" in dataset names.
- -w N, --width=N Set the number of columns of output. A value of 0 (zero)
- sets the number of columns to the maximum (65535).
- Default width is 80 columns.
--------------- File Options ---------------
-n, --contents Print a list of the file contents and exit
Optional value 1 also prints attributes.
@@ -35,6 +21,8 @@ usage: h5dump [OPTIONS] files
-g P, --group=P Print the specified group and all members
-l P, --soft-link=P Print the value(s) of the specified soft link
-t P, --datatype=P Print the specified named datatype
+ -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P
+ P can be the absolute path or just a relative path.
-A, --onlyattr Print the header and value of attributes
Optional value 0 suppresses printing attributes.
--------------- Object Property Options ---------------
@@ -47,6 +35,20 @@ usage: h5dump [OPTIONS] files
the data value and length is the number of bits of
the mask.
-R, --region Print dataset pointed by region references
+--------------- Formatting Options ---------------
+ -e, --escape Escape non printing characters
+ -r, --string Print 1-byte integer datasets as ASCII
+ -y, --noindex Do not print array indices with the data
+ -m T, --format=T Set the floating point output format
+ -q Q, --sort_by=Q Sort groups and attributes by index Q
+ -z Z, --sort_order=Z Sort groups and attributes by order Z
+ --enable-error-stack Prints messages from the HDF5 error stack as they
+ occur.
+ --no-compact-subset Disable compact form of subsetting and allow the use
+ of "[" in dataset names.
+ -w N, --width=N Set the number of columns of output. A value of 0 (zero)
+ sets the number of columns to the maximum (65535).
+ Default width is 80 columns.
--------------- XML Options ---------------
-x, --xml Output in XML using Schema
-u, --use-dtd Output in XML using DTD
@@ -77,15 +79,7 @@ usage: h5dump [OPTIONS] files
the file driver flag, the file will be opened with each driver in
turn and in the order specified above until one driver succeeds
in opening the file.
- These are the letters that are appended to the file name(without .h5) when opening
- names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:
- m: All meta data when using the split driver.
- s: The userblock, superblock, and driver info block
- b: B-tree nodes
- r: Dataset raw data
- g: Global heap
- l: local heap (object names)
- o: object headers
+ See examples below for family, split, and multi driver special file name usage.
F - is a filename.
P - is the full path from the root group to the object.
@@ -131,4 +125,12 @@ usage: h5dump [OPTIONS] files
h5dump -d /foo -f split splitfile
+ 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5
+
+ h5dump -d /foo -f multi mf
+
+ 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5
+
+ h5dump -d /foo -f family fam%05d.h5
+
h5dump error: Packed Bit length value(0) must be positive.
diff --git a/tools/testfiles/tpbitsMaxExceeded.ddl b/tools/testfiles/tpbitsMaxExceeded.ddl
index 21c5af4..eb569d2 100644
--- a/tools/testfiles/tpbitsMaxExceeded.ddl
+++ b/tools/testfiles/tpbitsMaxExceeded.ddl
@@ -2,20 +2,6 @@ usage: h5dump [OPTIONS] files
OPTIONS
-h, --help Print a usage message and exit
-V, --version Print version number and exit
---------------- Formatting Options ---------------
- -e, --escape Escape non printing characters
- -r, --string Print 1-byte integer datasets as ASCII
- -y, --noindex Do not print array indices with the data
- -m T, --format=T Set the floating point output format
- -q Q, --sort_by=Q Sort groups and attributes by index Q
- -z Z, --sort_order=Z Sort groups and attributes by order Z
- --enable-error-stack Prints messages from the HDF5 error stack as they
- occur.
- --no-compact-subset Disable compact form of subsetting and allow the use
- of "[" in dataset names.
- -w N, --width=N Set the number of columns of output. A value of 0 (zero)
- sets the number of columns to the maximum (65535).
- Default width is 80 columns.
--------------- File Options ---------------
-n, --contents Print a list of the file contents and exit
Optional value 1 also prints attributes.
@@ -35,6 +21,8 @@ usage: h5dump [OPTIONS] files
-g P, --group=P Print the specified group and all members
-l P, --soft-link=P Print the value(s) of the specified soft link
-t P, --datatype=P Print the specified named datatype
+ -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P
+ P can be the absolute path or just a relative path.
-A, --onlyattr Print the header and value of attributes
Optional value 0 suppresses printing attributes.
--------------- Object Property Options ---------------
@@ -47,6 +35,20 @@ usage: h5dump [OPTIONS] files
the data value and length is the number of bits of
the mask.
-R, --region Print dataset pointed by region references
+--------------- Formatting Options ---------------
+ -e, --escape Escape non printing characters
+ -r, --string Print 1-byte integer datasets as ASCII
+ -y, --noindex Do not print array indices with the data
+ -m T, --format=T Set the floating point output format
+ -q Q, --sort_by=Q Sort groups and attributes by index Q
+ -z Z, --sort_order=Z Sort groups and attributes by order Z
+ --enable-error-stack Prints messages from the HDF5 error stack as they
+ occur.
+ --no-compact-subset Disable compact form of subsetting and allow the use
+ of "[" in dataset names.
+ -w N, --width=N Set the number of columns of output. A value of 0 (zero)
+ sets the number of columns to the maximum (65535).
+ Default width is 80 columns.
--------------- XML Options ---------------
-x, --xml Output in XML using Schema
-u, --use-dtd Output in XML using DTD
@@ -77,15 +79,7 @@ usage: h5dump [OPTIONS] files
the file driver flag, the file will be opened with each driver in
turn and in the order specified above until one driver succeeds
in opening the file.
- These are the letters that are appended to the file name(without .h5) when opening
- names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:
- m: All meta data when using the split driver.
- s: The userblock, superblock, and driver info block
- b: B-tree nodes
- r: Dataset raw data
- g: Global heap
- l: local heap (object names)
- o: object headers
+ See examples below for family, split, and multi driver special file name usage.
F - is a filename.
P - is the full path from the root group to the object.
@@ -131,4 +125,12 @@ usage: h5dump [OPTIONS] files
h5dump -d /foo -f split splitfile
+ 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5
+
+ h5dump -d /foo -f multi mf
+
+ 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5
+
+ h5dump -d /foo -f family fam%05d.h5
+
h5dump error: Too many masks requested (max. 8). Mask list(0,1,0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1)
diff --git a/tools/testfiles/tpbitsOffsetExceeded.ddl b/tools/testfiles/tpbitsOffsetExceeded.ddl
index 52d901d..a00b561 100644
--- a/tools/testfiles/tpbitsOffsetExceeded.ddl
+++ b/tools/testfiles/tpbitsOffsetExceeded.ddl
@@ -2,20 +2,6 @@ usage: h5dump [OPTIONS] files
OPTIONS
-h, --help Print a usage message and exit
-V, --version Print version number and exit
---------------- Formatting Options ---------------
- -e, --escape Escape non printing characters
- -r, --string Print 1-byte integer datasets as ASCII
- -y, --noindex Do not print array indices with the data
- -m T, --format=T Set the floating point output format
- -q Q, --sort_by=Q Sort groups and attributes by index Q
- -z Z, --sort_order=Z Sort groups and attributes by order Z
- --enable-error-stack Prints messages from the HDF5 error stack as they
- occur.
- --no-compact-subset Disable compact form of subsetting and allow the use
- of "[" in dataset names.
- -w N, --width=N Set the number of columns of output. A value of 0 (zero)
- sets the number of columns to the maximum (65535).
- Default width is 80 columns.
--------------- File Options ---------------
-n, --contents Print a list of the file contents and exit
Optional value 1 also prints attributes.
@@ -35,6 +21,8 @@ usage: h5dump [OPTIONS] files
-g P, --group=P Print the specified group and all members
-l P, --soft-link=P Print the value(s) of the specified soft link
-t P, --datatype=P Print the specified named datatype
+ -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P
+ P can be the absolute path or just a relative path.
-A, --onlyattr Print the header and value of attributes
Optional value 0 suppresses printing attributes.
--------------- Object Property Options ---------------
@@ -47,6 +35,20 @@ usage: h5dump [OPTIONS] files
the data value and length is the number of bits of
the mask.
-R, --region Print dataset pointed by region references
+--------------- Formatting Options ---------------
+ -e, --escape Escape non printing characters
+ -r, --string Print 1-byte integer datasets as ASCII
+ -y, --noindex Do not print array indices with the data
+ -m T, --format=T Set the floating point output format
+ -q Q, --sort_by=Q Sort groups and attributes by index Q
+ -z Z, --sort_order=Z Sort groups and attributes by order Z
+ --enable-error-stack Prints messages from the HDF5 error stack as they
+ occur.
+ --no-compact-subset Disable compact form of subsetting and allow the use
+ of "[" in dataset names.
+ -w N, --width=N Set the number of columns of output. A value of 0 (zero)
+ sets the number of columns to the maximum (65535).
+ Default width is 80 columns.
--------------- XML Options ---------------
-x, --xml Output in XML using Schema
-u, --use-dtd Output in XML using DTD
@@ -77,15 +79,7 @@ usage: h5dump [OPTIONS] files
the file driver flag, the file will be opened with each driver in
turn and in the order specified above until one driver succeeds
in opening the file.
- These are the letters that are appended to the file name(without .h5) when opening
- names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:
- m: All meta data when using the split driver.
- s: The userblock, superblock, and driver info block
- b: B-tree nodes
- r: Dataset raw data
- g: Global heap
- l: local heap (object names)
- o: object headers
+ See examples below for family, split, and multi driver special file name usage.
F - is a filename.
P - is the full path from the root group to the object.
@@ -131,4 +125,12 @@ usage: h5dump [OPTIONS] files
h5dump -d /foo -f split splitfile
+ 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5
+
+ h5dump -d /foo -f multi mf
+
+ 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5
+
+ h5dump -d /foo -f family fam%05d.h5
+
h5dump error: Packed Bit offset value(64) must be between 0 and 63
diff --git a/tools/testfiles/tpbitsOffsetNegative.ddl b/tools/testfiles/tpbitsOffsetNegative.ddl
index 82b6c88..aa6e79b 100644
--- a/tools/testfiles/tpbitsOffsetNegative.ddl
+++ b/tools/testfiles/tpbitsOffsetNegative.ddl
@@ -2,20 +2,6 @@ usage: h5dump [OPTIONS] files
OPTIONS
-h, --help Print a usage message and exit
-V, --version Print version number and exit
---------------- Formatting Options ---------------
- -e, --escape Escape non printing characters
- -r, --string Print 1-byte integer datasets as ASCII
- -y, --noindex Do not print array indices with the data
- -m T, --format=T Set the floating point output format
- -q Q, --sort_by=Q Sort groups and attributes by index Q
- -z Z, --sort_order=Z Sort groups and attributes by order Z
- --enable-error-stack Prints messages from the HDF5 error stack as they
- occur.
- --no-compact-subset Disable compact form of subsetting and allow the use
- of "[" in dataset names.
- -w N, --width=N Set the number of columns of output. A value of 0 (zero)
- sets the number of columns to the maximum (65535).
- Default width is 80 columns.
--------------- File Options ---------------
-n, --contents Print a list of the file contents and exit
Optional value 1 also prints attributes.
@@ -35,6 +21,8 @@ usage: h5dump [OPTIONS] files
-g P, --group=P Print the specified group and all members
-l P, --soft-link=P Print the value(s) of the specified soft link
-t P, --datatype=P Print the specified named datatype
+ -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P
+ P can be the absolute path or just a relative path.
-A, --onlyattr Print the header and value of attributes
Optional value 0 suppresses printing attributes.
--------------- Object Property Options ---------------
@@ -47,6 +35,20 @@ usage: h5dump [OPTIONS] files
the data value and length is the number of bits of
the mask.
-R, --region Print dataset pointed by region references
+--------------- Formatting Options ---------------
+ -e, --escape Escape non printing characters
+ -r, --string Print 1-byte integer datasets as ASCII
+ -y, --noindex Do not print array indices with the data
+ -m T, --format=T Set the floating point output format
+ -q Q, --sort_by=Q Sort groups and attributes by index Q
+ -z Z, --sort_order=Z Sort groups and attributes by order Z
+ --enable-error-stack Prints messages from the HDF5 error stack as they
+ occur.
+ --no-compact-subset Disable compact form of subsetting and allow the use
+ of "[" in dataset names.
+ -w N, --width=N Set the number of columns of output. A value of 0 (zero)
+ sets the number of columns to the maximum (65535).
+ Default width is 80 columns.
--------------- XML Options ---------------
-x, --xml Output in XML using Schema
-u, --use-dtd Output in XML using DTD
@@ -77,15 +79,7 @@ usage: h5dump [OPTIONS] files
the file driver flag, the file will be opened with each driver in
turn and in the order specified above until one driver succeeds
in opening the file.
- These are the letters that are appended to the file name(without .h5) when opening
- names for the split(m,r) and multi(s,b,r,g,l,o) drivers. They are:
- m: All meta data when using the split driver.
- s: The userblock, superblock, and driver info block
- b: B-tree nodes
- r: Dataset raw data
- g: Global heap
- l: local heap (object names)
- o: object headers
+ See examples below for family, split, and multi driver special file name usage.
F - is a filename.
P - is the full path from the root group to the object.
@@ -131,4 +125,12 @@ usage: h5dump [OPTIONS] files
h5dump -d /foo -f split splitfile
+ 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5
+
+ h5dump -d /foo -f multi mf
+
+ 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5
+
+ h5dump -d /foo -f family fam%05d.h5
+
h5dump error: Bad mask list(-1,1)
diff --git a/vms/src/h5pubconf.h b/vms/src/h5pubconf.h
index 800bf6f..3152e3b 100644
--- a/vms/src/h5pubconf.h
+++ b/vms/src/h5pubconf.h
@@ -511,7 +511,7 @@
#define H5_PACKAGE_NAME "HDF5"
/* Define to the full name and version of this package. */
-#define H5_PACKAGE_STRING "HDF5 1.9.161-FA_a5"
+#define H5_PACKAGE_STRING "HDF5 1.9.162-FA_a5"
/* Define to the one symbol short name of this package. */
#define H5_PACKAGE_TARNAME "hdf5"
@@ -520,7 +520,7 @@
#define H5_PACKAGE_URL ""
/* Define to the version of this package. */
-#define H5_PACKAGE_VERSION "1.9.161-FA_a5"
+#define H5_PACKAGE_VERSION "1.9.162-FA_a5"
/* Width for printf() for type `long long' or `__int64', use `ll' */
#define H5_PRINTF_LL_WIDTH "ll"
@@ -683,7 +683,7 @@
/* #undef H5_USING_MEMCHECKER */
/* Version number of package */
-#define H5_VERSION "1.9.161-FA_a5"
+#define H5_VERSION "1.9.162-FA_a5"
/* Define if vsnprintf() returns the correct value for formatted strings that
don't fit into size allowed */