diff options
44 files changed, 165 insertions, 165 deletions
diff --git a/Makefile.in b/Makefile.in index e0403bf..8587ac7 100644 --- a/Makefile.in +++ b/Makefile.in @@ -356,12 +356,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la diff --git a/c++/Makefile.in b/c++/Makefile.in index 599ac02..424aa15 100644 --- a/c++/Makefile.in +++ b/c++/Makefile.in @@ -329,12 +329,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -859,7 +859,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -930,7 +930,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in index 43296c6..5acaa12 100644 --- a/c++/examples/Makefile.in +++ b/c++/examples/Makefile.in @@ -295,12 +295,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -729,7 +729,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -800,7 +800,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in index 903e301..444baee 100644 --- a/c++/src/Makefile.in +++ b/c++/src/Makefile.in @@ -351,12 +351,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -968,7 +968,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -1039,7 +1039,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in index 6384eec..e6d4f70 100644 --- a/c++/test/Makefile.in +++ b/c++/test/Makefile.in @@ -321,12 +321,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -805,7 +805,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -876,7 +876,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/config/commence.am b/config/commence.am index 667dbb2..7085d8f 100644 --- a/config/commence.am +++ b/config/commence.am @@ -24,12 +24,12 @@ CP=cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS=$(RUNSERIAL) +RUNEXEC=$(RUNSERIAL) # Libraries to link to while building LIBHDF5=$(top_builddir)/src/libhdf5.la diff --git a/config/conclude.am b/config/conclude.am index 446e963..830b60c 100644 --- a/config/conclude.am +++ b/config/conclude.am @@ -134,7 +134,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -205,7 +205,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ @@ -1,5 +1,5 @@ #! /bin/sh -# From configure.in Id: configure.in 18059 2010-01-03 13:39:26Z hdftest . +# From configure.in Id: configure.in 18100 2010-01-10 13:33:23Z hdftest . # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.64 for HDF5 1.9.58. # diff --git a/examples/Makefile.in b/examples/Makefile.in index 9a6dcec..5eb9d55 100644 --- a/examples/Makefile.in +++ b/examples/Makefile.in @@ -295,12 +295,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -759,7 +759,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -830,7 +830,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/fortran/Makefile.in b/fortran/Makefile.in index 65d8c2f..67fce8c 100644 --- a/fortran/Makefile.in +++ b/fortran/Makefile.in @@ -333,12 +333,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -868,7 +868,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -939,7 +939,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in index 684fd92..151bac5 100644 --- a/fortran/examples/Makefile.in +++ b/fortran/examples/Makefile.in @@ -295,12 +295,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -757,7 +757,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -828,7 +828,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in index 5272634..6ed830b 100644 --- a/fortran/src/Makefile.in +++ b/fortran/src/Makefile.in @@ -385,12 +385,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -1087,7 +1087,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -1158,7 +1158,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in index 7d5009a..f586adb 100644 --- a/fortran/test/Makefile.in +++ b/fortran/test/Makefile.in @@ -366,12 +366,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -960,7 +960,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -1031,7 +1031,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in index edb9a66..6dcf2bd 100644 --- a/fortran/testpar/Makefile.in +++ b/fortran/testpar/Makefile.in @@ -319,12 +319,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -762,7 +762,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -833,7 +833,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/Makefile.in b/hl/Makefile.in index addfd5a..8fd29b4 100755 --- a/hl/Makefile.in +++ b/hl/Makefile.in @@ -333,12 +333,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -867,7 +867,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -938,7 +938,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in index 87a582c..d83f520 100644 --- a/hl/c++/Makefile.in +++ b/hl/c++/Makefile.in @@ -329,12 +329,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -859,7 +859,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -930,7 +930,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/c++/examples/Makefile.in b/hl/c++/examples/Makefile.in index 4b11346..9fad167 100644 --- a/hl/c++/examples/Makefile.in +++ b/hl/c++/examples/Makefile.in @@ -295,12 +295,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -715,7 +715,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -786,7 +786,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in index 8b8f9e6..5f48def 100644 --- a/hl/c++/src/Makefile.in +++ b/hl/c++/src/Makefile.in @@ -341,12 +341,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -866,7 +866,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -937,7 +937,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in index 6bb1a99..7266306 100644 --- a/hl/c++/test/Makefile.in +++ b/hl/c++/test/Makefile.in @@ -315,12 +315,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -774,7 +774,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -845,7 +845,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/examples/Makefile.in b/hl/examples/Makefile.in index 0380eaf..44333b5 100644 --- a/hl/examples/Makefile.in +++ b/hl/examples/Makefile.in @@ -295,12 +295,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -748,7 +748,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -819,7 +819,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in index 79e0ce5..4a91756 100644 --- a/hl/fortran/Makefile.in +++ b/hl/fortran/Makefile.in @@ -333,12 +333,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -863,7 +863,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -934,7 +934,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/fortran/examples/Makefile.in b/hl/fortran/examples/Makefile.in index 698ffbf..ef5d165 100644 --- a/hl/fortran/examples/Makefile.in +++ b/hl/fortran/examples/Makefile.in @@ -295,12 +295,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -717,7 +717,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -788,7 +788,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in index 2dcf686..a3bc6d5 100644 --- a/hl/fortran/src/Makefile.in +++ b/hl/fortran/src/Makefile.in @@ -350,12 +350,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -900,7 +900,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -971,7 +971,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in index f395240..c6d1c35 100644 --- a/hl/fortran/test/Makefile.in +++ b/hl/fortran/test/Makefile.in @@ -324,12 +324,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -775,7 +775,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -846,7 +846,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in index bc4af90..4d3d425 100644 --- a/hl/src/Makefile.in +++ b/hl/src/Makefile.in @@ -341,12 +341,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -866,7 +866,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -937,7 +937,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in index 4a5aa5b..a364c75 100644 --- a/hl/test/Makefile.in +++ b/hl/test/Makefile.in @@ -345,12 +345,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -837,7 +837,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -908,7 +908,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/tools/Makefile.in b/hl/tools/Makefile.in index 2738d84..cb80338 100644 --- a/hl/tools/Makefile.in +++ b/hl/tools/Makefile.in @@ -330,12 +330,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -844,7 +844,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -915,7 +915,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in index e43dd07..b4cf901 100644 --- a/hl/tools/gif2h5/Makefile.in +++ b/hl/tools/gif2h5/Makefile.in @@ -330,12 +330,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -853,7 +853,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -924,7 +924,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/perform/Makefile.in b/perform/Makefile.in index da941e3..a5a28f5 100644 --- a/perform/Makefile.in +++ b/perform/Makefile.in @@ -366,12 +366,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -931,7 +931,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -1002,7 +1002,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/src/Makefile.in b/src/Makefile.in index bcdcd1f..2e216cf 100644 --- a/src/Makefile.in +++ b/src/Makefile.in @@ -401,12 +401,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -1376,7 +1376,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -1447,7 +1447,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/test/Makefile.am b/test/Makefile.am index ec1eed7..5a33c82 100644 --- a/test/Makefile.am +++ b/test/Makefile.am @@ -90,7 +90,7 @@ timings _timings: testmeta @for timing in $(TIMINGS) dummy; do \ if test $$timing != dummy; then \ echo "Running $$timing $(TEST_FLAGS)"; \ - $(RUNTEST) ./$$timing $(TEST_FLAGS) || exit 1; \ + $(RUNEXEC) ./$$timing $(TEST_FLAGS) || exit 1; \ fi; \ done; diff --git a/test/Makefile.in b/test/Makefile.in index 0f8adca..ed4cfac 100644 --- a/test/Makefile.in +++ b/test/Makefile.in @@ -624,12 +624,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -1366,7 +1366,7 @@ timings _timings: testmeta @for timing in $(TIMINGS) dummy; do \ if test $$timing != dummy; then \ echo "Running $$timing $(TEST_FLAGS)"; \ - $(RUNTEST) ./$$timing $(TEST_FLAGS) || exit 1; \ + $(RUNEXEC) ./$$timing $(TEST_FLAGS) || exit 1; \ fi; \ done; @@ -1473,7 +1473,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -1544,7 +1544,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/testpar/Makefile.in b/testpar/Makefile.in index c06e6d4..86218ea 100644 --- a/testpar/Makefile.in +++ b/testpar/Makefile.in @@ -339,12 +339,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -835,7 +835,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -906,7 +906,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/Makefile.in b/tools/Makefile.in index e482ea2..f403257 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -330,12 +330,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -845,7 +845,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -916,7 +916,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/h5copy/Makefile.in b/tools/h5copy/Makefile.in index d2a8e0d..113abba 100644 --- a/tools/h5copy/Makefile.in +++ b/tools/h5copy/Makefile.in @@ -322,12 +322,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -839,7 +839,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -910,7 +910,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in index 04a64da..e11ee1f 100644 --- a/tools/h5diff/Makefile.in +++ b/tools/h5diff/Makefile.in @@ -329,12 +329,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -860,7 +860,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -931,7 +931,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in index 8ca6684..1791da5 100644 --- a/tools/h5dump/Makefile.in +++ b/tools/h5dump/Makefile.in @@ -327,12 +327,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -851,7 +851,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -922,7 +922,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in index 15fcf90..620d0c0 100755 --- a/tools/h5import/Makefile.in +++ b/tools/h5import/Makefile.in @@ -322,12 +322,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -833,7 +833,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -904,7 +904,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in index 5509801..fe7fbd7 100644 --- a/tools/h5jam/Makefile.in +++ b/tools/h5jam/Makefile.in @@ -336,12 +336,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -864,7 +864,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -935,7 +935,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in index c11dc43..fdd09c6 100644 --- a/tools/h5ls/Makefile.in +++ b/tools/h5ls/Makefile.in @@ -316,12 +316,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -814,7 +814,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -885,7 +885,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in index dd33879..aa7781e 100644 --- a/tools/h5repack/Makefile.in +++ b/tools/h5repack/Makefile.in @@ -336,12 +336,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -887,7 +887,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -958,7 +958,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/h5stat/Makefile.in b/tools/h5stat/Makefile.in index 08de49b..a9bedaa 100644 --- a/tools/h5stat/Makefile.in +++ b/tools/h5stat/Makefile.in @@ -345,12 +345,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -907,7 +907,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -978,7 +978,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in index 2b269ca..09c8edf 100644 --- a/tools/lib/Makefile.in +++ b/tools/lib/Makefile.in @@ -315,12 +315,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -796,7 +796,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -867,7 +867,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in index a3d3e23..0b8ccb6 100644 --- a/tools/misc/Makefile.in +++ b/tools/misc/Makefile.in @@ -370,12 +370,12 @@ CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. -RUNTESTS = $(RUNSERIAL) +RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la @@ -969,7 +969,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ @@ -1040,7 +1040,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ |