diff options
50 files changed, 577 insertions, 339 deletions
diff --git a/Makefile.am b/Makefile.am index 7374a1c..0e3fea4 100755 --- a/Makefile.am +++ b/Makefile.am @@ -82,7 +82,7 @@ DISTCLEANFILES=src/H5config.h src/H5pubconf.h config/stamp1 config/stamp2 # These simply involve recursing into subdirectories. test _test: check -lib progs check-p check-s: +lib progs check-p check-s check-clean: @@SETX@; for d in $(SUBDIRS); do \ if test $$d != .; then \ (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ @@ -91,7 +91,7 @@ lib progs check-p check-s: # Make all, tests, and (un)install also recurse into perform directory all-local: - cd perform && $(MAKE) $(AM_MAKEFLAGS) all + @cd perform && $(MAKE) $(AM_MAKEFLAGS) all tests: @@SETX@; for d in $(SUBDIRS) perform; do \ if test $$d != .; then \ @@ -100,9 +100,9 @@ tests: done install-exec-local: - cd perform && $(MAKE) $(AM_MAKEFLAGS) install + @cd perform && $(MAKE) $(AM_MAKEFLAGS) install uninstall-local: - cd perform && $(MAKE) $(AM_MAKEFLAGS) uninstall + @cd perform && $(MAKE) $(AM_MAKEFLAGS) uninstall # Clean and mostlyclean need to recurse into examples and perform # directories unless they've already been distcleaned. @@ -121,17 +121,17 @@ mostlyclean-local: (cd $$d && $(MAKE) $(AM_MAKEFLAGS) mostlyclean) || exit 1; \ fi; \ done; \ - if test -d ii_files; then \ + @if test -d ii_files; then \ $(RM) -rf ii_files; \ fi # 'make install-all' also installs examples install-all: - $(MAKE) $(AM_MAKEFLAGS) install - $(MAKE) $(AM_MAKEFLAGS) install-examples + @$(MAKE) $(AM_MAKEFLAGS) install + @$(MAKE) $(AM_MAKEFLAGS) install-examples uninstall-all: - $(MAKE) $(AM_MAKEFLAGS) uninstall - $(MAKE) $(AM_MAKEFLAGS) uninstall-examples + @$(MAKE) $(AM_MAKEFLAGS) uninstall + @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples # Install examples in this directory and recursively install-examples uninstall-examples: @@ -141,15 +141,15 @@ install-examples uninstall-examples: # Placeholder to remind users that docs are now in a separate repository. install-doc: - echo "docs no longer live in this tree. Use install-examples to install examples." + @echo "docs no longer live in this tree. Use install-examples to install examples." uninstall-doc: - echo "docs no longer live in this tree. Use install-examples to install examples." + @echo "docs no longer live in this tree. Use install-examples to install examples." # `make check-install' or `make installcheck' checks that examples can # be successfully built installcheck-local: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; # Automake wants to make config.status depend on configure. This # makes sense, but config.status can't always be regenerated diff --git a/Makefile.in b/Makefile.in index 50f5e18..9882685 100644 --- a/Makefile.in +++ b/Makefile.in @@ -314,13 +314,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) @BUILD_PARALLEL_CONDITIONAL_FALSE@TESTPARALLEL_DIR = # Define subdirectories to build. @@ -777,7 +780,7 @@ check-install: installcheck # These simply involve recursing into subdirectories. test _test: check -lib progs check-p check-s: +lib progs check-p check-s check-clean: @@SETX@; for d in $(SUBDIRS); do \ if test $$d != .; then \ (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ @@ -786,7 +789,7 @@ lib progs check-p check-s: # Make all, tests, and (un)install also recurse into perform directory all-local: - cd perform && $(MAKE) $(AM_MAKEFLAGS) all + @cd perform && $(MAKE) $(AM_MAKEFLAGS) all tests: @@SETX@; for d in $(SUBDIRS) perform; do \ if test $$d != .; then \ @@ -795,9 +798,9 @@ tests: done install-exec-local: - cd perform && $(MAKE) $(AM_MAKEFLAGS) install + @cd perform && $(MAKE) $(AM_MAKEFLAGS) install uninstall-local: - cd perform && $(MAKE) $(AM_MAKEFLAGS) uninstall + @cd perform && $(MAKE) $(AM_MAKEFLAGS) uninstall # Clean and mostlyclean need to recurse into examples and perform # directories unless they've already been distcleaned. @@ -816,17 +819,17 @@ mostlyclean-local: (cd $$d && $(MAKE) $(AM_MAKEFLAGS) mostlyclean) || exit 1; \ fi; \ done; \ - if test -d ii_files; then \ + @if test -d ii_files; then \ $(RM) -rf ii_files; \ fi # 'make install-all' also installs examples install-all: - $(MAKE) $(AM_MAKEFLAGS) install - $(MAKE) $(AM_MAKEFLAGS) install-examples + @$(MAKE) $(AM_MAKEFLAGS) install + @$(MAKE) $(AM_MAKEFLAGS) install-examples uninstall-all: - $(MAKE) $(AM_MAKEFLAGS) uninstall - $(MAKE) $(AM_MAKEFLAGS) uninstall-examples + @$(MAKE) $(AM_MAKEFLAGS) uninstall + @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples # Install examples in this directory and recursively install-examples uninstall-examples: @@ -836,15 +839,15 @@ install-examples uninstall-examples: # Placeholder to remind users that docs are now in a separate repository. install-doc: - echo "docs no longer live in this tree. Use install-examples to install examples." + @echo "docs no longer live in this tree. Use install-examples to install examples." uninstall-doc: - echo "docs no longer live in this tree. Use install-examples to install examples." + @echo "docs no longer live in this tree. Use install-examples to install examples." # `make check-install' or `make installcheck' checks that examples can # be successfully built installcheck-local: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; # Automake wants to make config.status depend on configure. This # makes sense, but config.status can't always be regenerated diff --git a/c++/Makefile.am b/c++/Makefile.am index a64a215..042fb92 100644 --- a/c++/Makefile.am +++ b/c++/Makefile.am @@ -27,23 +27,23 @@ DIST_SUBDIRS = src test examples # Clean and mostlyclean need to recurse into examples directory clean-local: - if test -f examples/Makefile; then \ + @if test -f examples/Makefile; then \ (cd examples && $(MAKE) $(AM_MAKEFLAGS) clean) || exit 1; \ fi; mostlyclean-local: - if test -f examples/Makefile; then \ + @if test -f examples/Makefile; then \ (cd examples && $(MAKE) $(AM_MAKEFLAGS) mostlyclean) || exit 1; \ fi; # Install examples install-examples uninstall-examples: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; # Check that examples can be successfully built check-install: - $(MAKE) $(AM_MAKEFLAGS) installcheck + @$(MAKE) $(AM_MAKEFLAGS) installcheck installcheck-local: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; include $(top_srcdir)/config/conclude.am diff --git a/c++/Makefile.in b/c++/Makefile.in index cbd29d9..12ad160 100644 --- a/c++/Makefile.in +++ b/c++/Makefile.in @@ -284,13 +284,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) @BUILD_CXX_CONDITIONAL_TRUE@SUBDIRS = src test DIST_SUBDIRS = src test examples @@ -632,24 +635,24 @@ check-install: installcheck # Clean and mostlyclean need to recurse into examples directory clean-local: - if test -f examples/Makefile; then \ + @if test -f examples/Makefile; then \ (cd examples && $(MAKE) $(AM_MAKEFLAGS) clean) || exit 1; \ fi; mostlyclean-local: - if test -f examples/Makefile; then \ + @if test -f examples/Makefile; then \ (cd examples && $(MAKE) $(AM_MAKEFLAGS) mostlyclean) || exit 1; \ fi; # Install examples install-examples uninstall-examples: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; # Check that examples can be successfully built check-install: - $(MAKE) $(AM_MAKEFLAGS) installcheck + @$(MAKE) $(AM_MAKEFLAGS) installcheck installcheck-local: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. @@ -659,7 +662,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -679,6 +682,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/c++/examples/Makefile.am b/c++/examples/Makefile.am index 23757b3..f1664ff 100644 --- a/c++/examples/Makefile.am +++ b/c++/examples/Makefile.am @@ -56,9 +56,9 @@ $(EXAMPLEDIR): -$(top_srcdir)/bin/mkdirs $@ install-data-local: - $(MAKE) install-examples + @$(MAKE) install-examples uninstall-local: - $(MAKE) uninstall-examples + @$(MAKE) uninstall-examples # Install source files, which are the examples with .cpp suffixes. Do the same # for uninstall. @@ -75,9 +75,9 @@ uninstall-examples: fi check-install: - $(MAKE) installcheck + @$(MAKE) $(AM_MAKEFLAGS) installcheck installcheck-local: - $(MAKE) check + @$(MAKE) $(AM_MAKEFLAGS) check # How to build programs using h5c++ $(EXTRA_PROG): $(H5CPP) $(LIBHDF5) $(LIBH5CPP) diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in index 687e5b0..7d8ba45 100644 --- a/c++/examples/Makefile.in +++ b/c++/examples/Makefile.in @@ -276,16 +276,20 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # These are the files that 'make clean' (and derivatives) will remove from this # directory. Since automake doesn't know about the examples, we need to # tell it to clean the example programs, too. -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 $(EXTRA_PROG:=.o) +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) *.h5 $(EXTRA_PROG:=.o) # Use h5c++ to build examples, instead of reguar C++ compiler H5CPP = $(bindir)/h5c++ @@ -506,9 +510,9 @@ $(EXAMPLEDIR): -$(top_srcdir)/bin/mkdirs $@ install-data-local: - $(MAKE) install-examples + @$(MAKE) install-examples uninstall-local: - $(MAKE) uninstall-examples + @$(MAKE) uninstall-examples # Install source files, which are the examples with .cpp suffixes. Do the same # for uninstall. @@ -525,9 +529,9 @@ uninstall-examples: fi check-install: - $(MAKE) installcheck + @$(MAKE) $(AM_MAKEFLAGS) installcheck installcheck-local: - $(MAKE) check + @$(MAKE) $(AM_MAKEFLAGS) check # How to build programs using h5c++ $(EXTRA_PROG): $(H5CPP) $(LIBHDF5) $(LIBH5CPP) @@ -553,7 +557,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -573,6 +577,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/c++/src/Makefile.am b/c++/src/Makefile.am index 5c9a2de..1cd499c 100644 --- a/c++/src/Makefile.am +++ b/c++/src/Makefile.am @@ -57,7 +57,7 @@ DISTCLEANFILES=h5c++ libhdf5.settings # holds *.ii files, which are template entity instantiations. # This entire directory should be cleaned. mostlyclean-local: - if test -d ii_files; then \ + @if test -d ii_files; then \ $(RM) -rf ii_files; \ fi diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in index ffea11b..eed8cba 100644 --- a/c++/src/Makefile.in +++ b/c++/src/Makefile.in @@ -318,13 +318,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include src directory INCLUDES = -I$(top_srcdir)/src @@ -733,7 +736,7 @@ check-install: installcheck # holds *.ii files, which are template entity instantiations. # This entire directory should be cleaned. mostlyclean-local: - if test -d ii_files; then \ + @if test -d ii_files; then \ $(RM) -rf ii_files; \ fi @@ -745,7 +748,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -765,6 +768,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/c++/test/Makefile.am b/c++/test/Makefile.am index 43194e5..8d2627a 100644 --- a/c++/test/Makefile.am +++ b/c++/test/Makefile.am @@ -43,7 +43,7 @@ HDF_CXX=yes # holds *.ii files, which are template entity instantiations. # This entire directory should be cleaned. mostlyclean-local: - if test -d ii_files; then \ + @if test -d ii_files; then \ $(RM) -rf ii_files; \ fi diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in index 5167c34..8c8e472 100644 --- a/c++/test/Makefile.in +++ b/c++/test/Makefile.in @@ -307,13 +307,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include src, test, and c++/src directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/c++/src @@ -621,7 +624,7 @@ check-install: installcheck # holds *.ii files, which are template entity instantiations. # This entire directory should be cleaned. mostlyclean-local: - if test -d ii_files; then \ + @if test -d ii_files; then \ $(RM) -rf ii_files; \ fi @@ -633,7 +636,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -653,6 +656,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/config/commence.am b/config/commence.am index fc13cfb..3325efb 100644 --- a/config/commence.am +++ b/config/commence.am @@ -57,12 +57,16 @@ AUTOCONF=/afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES=$(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES=$(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + +MOSTLYCLEANFILES=$(CHECK_CLEANFILES) # check-install is a synonym for installcheck. # Add this build rule here (rather than in conclude.am, where build rules diff --git a/config/conclude.am b/config/conclude.am index 9553fce..4204d74 100644 --- a/config/conclude.am +++ b/config/conclude.am @@ -22,7 +22,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -42,6 +42,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/examples/Makefile.am b/examples/Makefile.am index 1e4b883..31e1d7a 100644 --- a/examples/Makefile.am +++ b/examples/Makefile.am @@ -70,9 +70,9 @@ $(EXAMPLEDIR): -$(top_srcdir)/bin/mkdirs $@ install-data-local: - $(MAKE) $(AM_MAKEFLAGS) install-examples + @$(MAKE) $(AM_MAKEFLAGS) install-examples uninstall-local: - $(MAKE) $(AM_MAKEFLAGS) uninstall-examples + @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples # We want to install the source files, not the examples themselves. Add '.c' to # each example to get its source. This is a bit kludgy. @@ -89,9 +89,9 @@ uninstall-examples: fi check-install: - $(MAKE) $(AM_MAKEFLAGS) installcheck + @$(MAKE) $(AM_MAKEFLAGS) installcheck installcheck-local: - $(MAKE) $(AM_MAKEFLAGS) check + @$(MAKE) $(AM_MAKEFLAGS) check # List dependencies for each program. Normally, automake would take # care of this for us, but if we tell automake about the programs it diff --git a/examples/Makefile.in b/examples/Makefile.in index dfac23d..77a8d93 100644 --- a/examples/Makefile.in +++ b/examples/Makefile.in @@ -276,15 +276,18 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # We need to tell automake what to clean -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 *.raw *.meta *.clog \ - *.o +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) *.h5 *.raw *.meta *.clog *.o @BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = ph5example # Example programs. @@ -517,9 +520,9 @@ $(EXAMPLEDIR): -$(top_srcdir)/bin/mkdirs $@ install-data-local: - $(MAKE) $(AM_MAKEFLAGS) install-examples + @$(MAKE) $(AM_MAKEFLAGS) install-examples uninstall-local: - $(MAKE) $(AM_MAKEFLAGS) uninstall-examples + @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples # We want to install the source files, not the examples themselves. Add '.c' to # each example to get its source. This is a bit kludgy. @@ -536,9 +539,9 @@ uninstall-examples: fi check-install: - $(MAKE) $(AM_MAKEFLAGS) installcheck + @$(MAKE) $(AM_MAKEFLAGS) installcheck installcheck-local: - $(MAKE) $(AM_MAKEFLAGS) check + @$(MAKE) $(AM_MAKEFLAGS) check # List dependencies for each program. Normally, automake would take # care of this for us, but if we tell automake about the programs it @@ -568,7 +571,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -588,6 +591,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/fortran/Makefile.am b/fortran/Makefile.am index dce1857..9a988d9 100644 --- a/fortran/Makefile.am +++ b/fortran/Makefile.am @@ -38,24 +38,24 @@ DIST_SUBDIRS=src test testpar examples # Clean and mostlyclean need to recurse into examples directory clean-local: - if test -f examples/Makefile; then \ + @if test -f examples/Makefile; then \ (cd examples && $(MAKE) $(AM_MAKEFLAGS) clean) || exit 1; \ fi; mostlyclean-local: - if test -f examples/Makefile; then \ + @if test -f examples/Makefile; then \ (cd examples && $(MAKE) $(AM_MAKEFLAGS) mostlyclean) || exit 1; \ fi; # Install examples install-examples uninstall-examples: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; # Check that examples can be successfully built check-install: - $(MAKE) $(AM_MAKEFLAGS) installcheck + @$(MAKE) $(AM_MAKEFLAGS) installcheck installcheck-local: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; include $(top_srcdir)/config/conclude.am diff --git a/fortran/Makefile.in b/fortran/Makefile.in index 127300a..b2da807 100644 --- a/fortran/Makefile.in +++ b/fortran/Makefile.in @@ -288,13 +288,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) @BUILD_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar # Subdirectories in build order, not including examples directory @@ -641,24 +644,24 @@ check-install: installcheck # Clean and mostlyclean need to recurse into examples directory clean-local: - if test -f examples/Makefile; then \ + @if test -f examples/Makefile; then \ (cd examples && $(MAKE) $(AM_MAKEFLAGS) clean) || exit 1; \ fi; mostlyclean-local: - if test -f examples/Makefile; then \ + @if test -f examples/Makefile; then \ (cd examples && $(MAKE) $(AM_MAKEFLAGS) mostlyclean) || exit 1; \ fi; # Install examples install-examples uninstall-examples: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; # Check that examples can be successfully built check-install: - $(MAKE) $(AM_MAKEFLAGS) installcheck + @$(MAKE) $(AM_MAKEFLAGS) installcheck installcheck-local: - (cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. @@ -668,7 +671,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -688,6 +691,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/fortran/examples/Makefile.am b/fortran/examples/Makefile.am index f01629a..09fe83c 100644 --- a/fortran/examples/Makefile.am +++ b/fortran/examples/Makefile.am @@ -75,9 +75,9 @@ $(EXAMPLEDIR): -$(top_srcdir)/bin/mkdirs $@ install-data-local: - $(MAKE) install-examples + @$(MAKE) install-examples uninstall-local: - $(MAKE) uninstall-examples + @$(MAKE) uninstall-examples # We're installing source files, not the example programs. Add .f90 to each # example program to get its source (and do the same when uninstalling). @@ -94,9 +94,9 @@ uninstall-examples: fi check-install: - $(MAKE) installcheck + @$(MAKE) installcheck installcheck-local: - $(MAKE) check + @$(MAKE) check # List dependencies for each example. Normally, automake would take # care of this for us, but if we tell automake about the programs it diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in index b9404dc..df2a7fb 100644 --- a/fortran/examples/Makefile.in +++ b/fortran/examples/Makefile.in @@ -276,14 +276,18 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Tell automake which files to clean -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) $(EXTRA_PROG:=.o) +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) $(EXTRA_PROG:=.o) # Compile parallel fortran examples only if parallel is enabled @BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = ph5example @@ -522,9 +526,9 @@ $(EXAMPLEDIR): -$(top_srcdir)/bin/mkdirs $@ install-data-local: - $(MAKE) install-examples + @$(MAKE) install-examples uninstall-local: - $(MAKE) uninstall-examples + @$(MAKE) uninstall-examples # We're installing source files, not the example programs. Add .f90 to each # example program to get its source (and do the same when uninstalling). @@ -541,9 +545,9 @@ uninstall-examples: fi check-install: - $(MAKE) installcheck + @$(MAKE) installcheck installcheck-local: - $(MAKE) check + @$(MAKE) check # List dependencies for each example. Normally, automake would take # care of this for us, but if we tell automake about the programs it @@ -575,7 +579,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -595,6 +599,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/fortran/src/Makefile.am b/fortran/src/Makefile.am index cc46d1c..8b7a1f5 100644 --- a/fortran/src/Makefile.am +++ b/fortran/src/Makefile.am @@ -65,26 +65,26 @@ MOSTLYCLEANFILES+=H5fortran_types.f90 H5f90i_gen.h H5fort_type_defines.h \ maintainer-clean-local: clean-local distclean-local: clean-local clean-local: - if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ $(RM) *.$(F9XMODEXT); \ fi install-data-local: - if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(includedir)/. ; \ fi uninstall-local: - if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(includedir)/HDF5.$(F9XMODEXT)"; then \ set -x; $(RM) $(includedir)/*.$(F9XMODEXT); \ fi; \ fi; \ - $(RM) $(bindir)/$(H5FC_NAME) + @$(RM) $(bindir)/$(H5FC_NAME) # Also install and uninstall (uninstall-local above) h5fc script install-exec-local: - $(INSTALL) h5fc $(bindir)/$(H5FC_NAME) + @$(INSTALL) h5fc $(bindir)/$(H5FC_NAME) # Install libhdf5_fortran.settings in lib directory settingsdir=$(libdir) diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in index 5fb6ecf..9226e92 100644 --- a/fortran/src/Makefile.in +++ b/fortran/src/Makefile.in @@ -343,16 +343,20 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # H5fortran_types.f90 and H5f90i.h are automatically generaed by # H5match_types, and must be cleaned explicitly. H5fort_type_defines.h # is generated by H5fortran_detect -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) H5fortran_types.f90 \ +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) H5fortran_types.f90 \ H5f90i_gen.h H5fort_type_defines.h H5fortran_detect.f90 # Include src directory in both Fortran and C flags (C compiler is used @@ -786,26 +790,26 @@ check-install: installcheck maintainer-clean-local: clean-local distclean-local: clean-local clean-local: - if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ $(RM) *.$(F9XMODEXT); \ fi install-data-local: - if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(includedir)/. ; \ fi uninstall-local: - if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(includedir)/HDF5.$(F9XMODEXT)"; then \ set -x; $(RM) $(includedir)/*.$(F9XMODEXT); \ fi; \ fi; \ - $(RM) $(bindir)/$(H5FC_NAME) + @$(RM) $(bindir)/$(H5FC_NAME) # Also install and uninstall (uninstall-local above) h5fc script install-exec-local: - $(INSTALL) h5fc $(bindir)/$(H5FC_NAME) + @$(INSTALL) h5fc $(bindir)/$(H5FC_NAME) #Specify what Automake needs to create: first the H5fort_type_defines.h # header, then H5match_types which includes that header, then @@ -860,7 +864,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -880,6 +884,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/fortran/test/Makefile.am b/fortran/test/Makefile.am index 2370590..6ecee2f 100644 --- a/fortran/test/Makefile.am +++ b/fortran/test/Makefile.am @@ -61,11 +61,4 @@ MOSTLYCLEANFILES+=*.h5 *.tmp # from tests in conclude.am) HDF_FORTRAN=yes -## Fortran dependencies must be hardcoded, unfortunately. -##FORTLIBTEST_OBJ= fortranlib_test.lo \ -## tH5F.lo tH5D.lo tH5R.lo tH5S.lo tH5T.lo tH5VL.lo tH5Z.lo \ -## tH5Sselect.lo tH5P.lo tH5A.lo tH5I.lo tH5G.lo tH5E.lo tf.lo \ -## t.lo -##fortranlib_test$(EXEEXT): $(FORTLIBTEST_OBJ) - include $(top_srcdir)/config/conclude.am diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in index 06dbb96..66dad14 100644 --- a/fortran/test/Makefile.in +++ b/fortran/test/Makefile.in @@ -345,14 +345,18 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 *.tmp +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) *.h5 *.tmp # Include files AM_FCFLAGS = -I$(top_builddir)/fortran/src $(F9XMODFLAG)$(top_builddir)/fortran/src @@ -829,7 +833,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -849,6 +853,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/fortran/testpar/Makefile.am b/fortran/testpar/Makefile.am index 75c1588..30cf60b 100644 --- a/fortran/testpar/Makefile.am +++ b/fortran/testpar/Makefile.am @@ -42,10 +42,4 @@ LDADD=$(LIBH5FTEST) $(LIBH5TEST) $(LIBH5F) $(LIBHDF5) # Mark this directory as part of the Fortran API HDF_FORTRAN=yes -# Put in dependencies to the THDF5 module so that things will be built -# in the correct order. -#thdf5.lo: thdf5.o -#thyperslab_wr.o: $(srcdir)/thyperslab_wr.f90 thdf5.lo -#ptesthdf5_fortran.o: $(srcdir)/ptesthdf5_fortran.f90 thdf5.lo - include $(top_srcdir)/config/conclude.am diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in index 374c2cb..4c0ebd7 100644 --- a/fortran/testpar/Makefile.in +++ b/fortran/testpar/Makefile.in @@ -300,13 +300,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include files AM_FCFLAGS = -I$(top_srcdir)/fortran/src -I$(top_srcdir)/fortran/test $(F9XMODFLAG)$(top_builddir)/fortran/src @@ -598,7 +601,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -618,6 +621,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. @@ -760,12 +767,6 @@ check-vfd: HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check; \ fi; \ done - -# Put in dependencies to the THDF5 module so that things will be built -# in the correct order. -#thdf5.lo: thdf5.o -#thyperslab_wr.o: $(srcdir)/thyperslab_wr.f90 thdf5.lo -#ptesthdf5_fortran.o: $(srcdir)/ptesthdf5_fortran.f90 thdf5.lo # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/hl/Makefile.in b/hl/Makefile.in index 5e6b384..7ca0077 100755 --- a/hl/Makefile.in +++ b/hl/Makefile.in @@ -280,13 +280,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) @BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran @BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++ @BUILD_HDF5_HL_CONDITIONAL_TRUE@SUBDIRS = src test $(CXX_DIR) $(FORTRAN_DIR) @@ -633,7 +636,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -653,6 +656,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in index b5fb124..7da55eb 100644 --- a/hl/c++/Makefile.in +++ b/hl/c++/Makefile.in @@ -285,13 +285,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) SUBDIRS = src test # Automake needs to be taught how to build lib, progs, and tests targets. @@ -636,7 +639,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -656,6 +659,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in index e6b857f..2a20f72 100644 --- a/hl/c++/src/Makefile.in +++ b/hl/c++/src/Makefile.in @@ -307,13 +307,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include src directory INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src @@ -658,7 +661,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -678,6 +681,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in index efce9d9..53d499c 100644 --- a/hl/c++/test/Makefile.in +++ b/hl/c++/test/Makefile.in @@ -301,13 +301,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_srcdir)/hl/c++/src -I$(top_srcdir)/test @@ -607,7 +610,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -627,6 +630,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in index f58bf2f..ba8c2ae 100644 --- a/hl/fortran/Makefile.in +++ b/hl/fortran/Makefile.in @@ -280,13 +280,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) SUBDIRS = src test # Automake needs to be taught how to build lib, progs, and tests targets. @@ -631,7 +634,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -651,6 +654,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/fortran/src/Makefile.am b/hl/fortran/src/Makefile.am index 1462fbb..14076e7 100644 --- a/hl/fortran/src/Makefile.am +++ b/hl/fortran/src/Makefile.am @@ -29,8 +29,6 @@ lib_LTLIBRARIES=libhdf5hl_fortran.la libhdf5hl_fortran_la_SOURCES=H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c H5LTff.f90 \ H5IMff.f90 H5TBff.f90 -#libhdf5hl_fortran_la_LIBADD=$(LIBH5_HL) - # Fortran module files can have different extensions and different names # (e.g., different capitalizations) on different platforms. Write rules # for them explicitly rather than trying to teach automake about them. @@ -38,17 +36,17 @@ libhdf5hl_fortran_la_SOURCES=H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c H5LTff.f90 \ maintainer-clean-local: clean-local distclean-local: clean-local clean-local: - if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ $(RM) *.$(F9XMODEXT); \ fi install-data-local: - if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(includedir)/. ; \ fi uninstall-local: - if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(includedir)/HDF5.$(F9XMODEXT)"; then \ set -x; $(RM) $(includedir)/*.$(F9XMODEXT); \ fi; \ diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in index e945d4e..409bb03 100644 --- a/hl/fortran/src/Makefile.in +++ b/hl/fortran/src/Makefile.in @@ -301,13 +301,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_builddir)/hl/src \ -I$(top_srcdir)/fortran/src -I$(top_builddir)/fortran/src @@ -641,8 +644,6 @@ uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \ # as well. check-install: installcheck -#libhdf5hl_fortran_la_LIBADD=$(LIBH5_HL) - # Fortran module files can have different extensions and different names # (e.g., different capitalizations) on different platforms. Write rules # for them explicitly rather than trying to teach automake about them. @@ -650,17 +651,17 @@ check-install: installcheck maintainer-clean-local: clean-local distclean-local: clean-local clean-local: - if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ $(RM) *.$(F9XMODEXT); \ fi install-data-local: - if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(includedir)/. ; \ fi uninstall-local: - if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ + @if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(includedir)/HDF5.$(F9XMODEXT)"; then \ set -x; $(RM) $(includedir)/*.$(F9XMODEXT); \ fi; \ @@ -682,7 +683,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -702,6 +703,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in index 594253a..891a304 100644 --- a/hl/fortran/test/Makefile.in +++ b/hl/fortran/test/Makefile.in @@ -300,15 +300,18 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files. -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) dsetf[1-4].h5 f1img.h5 \ - f1tab.h5 +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) dsetf[1-4].h5 f1img.h5 f1tab.h5 AM_CPPFLAGS = -I$(top_srcdir)/src -I$(top_builddir)/src -I$(top_srcdir)/hl/src AM_FCFLAGS = -I$(top_builddir)/fortran/src -I$(top_builddir)/hl/fortran/src $(F9XMODFLAG)$(top_builddir)/fortran/src $(F9XMODFLAG)$(top_builddir)/hl/fortran/src @@ -598,7 +601,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -618,6 +621,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in index 56a47b8..c4f5777 100644 --- a/hl/src/Makefile.in +++ b/hl/src/Makefile.in @@ -298,13 +298,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Add include directories to the C preprocessor flags AM_CPPFLAGS = -I$(top_srcdir)/src @@ -646,7 +649,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -666,6 +669,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in index 0e9ee01..c648788 100644 --- a/hl/test/Makefile.in +++ b/hl/test/Makefile.in @@ -310,14 +310,18 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files. These files are the ones created by running `make test'. -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) combine_tables[1-2].h5 \ +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) combine_tables[1-2].h5 \ test_ds[1-6].h5 test_image[1-3].h5 test_lite[1-2].h5 \ test_table.h5 test_packet_table.h5 @@ -631,7 +635,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -651,6 +655,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in index b5b639d..b8c389a 100644 --- a/hl/tools/gif2h5/Makefile.in +++ b/hl/tools/gif2h5/Makefile.in @@ -308,13 +308,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include src and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -641,7 +644,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -661,6 +664,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/perform/Makefile.in b/perform/Makefile.in index b05499f..5c1bca9 100644 --- a/perform/Makefile.in +++ b/perform/Makefile.in @@ -329,13 +329,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib @BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = h5perf @@ -700,7 +703,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -720,6 +723,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/src/Makefile.in b/src/Makefile.in index 81097b0..40ebd40 100644 --- a/src/Makefile.in +++ b/src/Makefile.in @@ -343,15 +343,19 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) H5detect.o H5detect.lo \ - H5detect H5Tinit.o H5Tinit.lo H5Tinit.c +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) H5detect.o H5detect.lo H5detect \ + H5Tinit.o H5Tinit.lo H5Tinit.c # Add libtool shared library version numbers to the HDF5 library # See libtool versioning documentation online. @@ -957,7 +961,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -977,6 +981,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/test/Makefile.in b/test/Makefile.in index df37afe..f16f627 100644 --- a/test/Makefile.in +++ b/test/Makefile.in @@ -496,28 +496,31 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files. These files are the ones created by setting the # HDF5_NOCLEANUP environment variable and running `make test' without # specifying a file prefix or low-level driver. Changing the file # prefix or low-level driver with environment variables will influence # the temporary file name in ways that the makefile is not aware of. -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) cmpd_dset.h5 \ - compact_dataset.h5 dataset.h5 extend.h5 istore.h5 \ - tfile[1-4].h5 th5s[1-3].h5 lheap.h5 ohdr.h5 stab[1-2].h5 \ - extern_[1-3].h5 extern_[1-4][ab].raw gheap[0-4].h5 \ - dt_arith[1-2] links.h5 links[1-3].h5 big.data \ - big[0-9][0-9][0-9][0-9][0-9].h5 dtypes[1-8].h5 \ - dt_arith[1-2].h5 tattr.h5 tselect.h5 mtime.h5 unlink.h5 \ - unicode.h5 fillval_[0-9].h5 fillval.raw mount_[0-9].h5 \ - testmeta.h5 ttime.h5 trefer[1-3].h5 tvltypes.h5 tvlstr.h5 \ - tvlstr2.h5 flush.h5 enum1.h5 titerate.h5 ttsafe.h5 tarray1.h5 \ - tgenprop.h5 tmisc[0-9]*.h5 set_extent_read.h5 \ +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) cmpd_dset.h5 compact_dataset.h5 \ + dataset.h5 extend.h5 istore.h5 tfile[1-4].h5 th5s[1-3].h5 \ + lheap.h5 ohdr.h5 stab[1-2].h5 extern_[1-3].h5 \ + extern_[1-4][ab].raw gheap[0-4].h5 dt_arith[1-2] links.h5 \ + links[1-3].h5 big.data big[0-9][0-9][0-9][0-9][0-9].h5 \ + dtypes[1-8].h5 dt_arith[1-2].h5 tattr.h5 tselect.h5 mtime.h5 \ + unlink.h5 unicode.h5 fillval_[0-9].h5 fillval.raw \ + mount_[0-9].h5 testmeta.h5 ttime.h5 trefer[1-3].h5 tvltypes.h5 \ + tvlstr.h5 tvlstr2.h5 flush.h5 enum1.h5 titerate.h5 ttsafe.h5 \ + tarray1.h5 tgenprop.h5 tmisc[0-9]*.h5 set_extent_read.h5 \ set_extent_create.h5 getname.h5 getname[1-3].h5 sec2_file.h5 \ family_file000[0-3][0-9].h5 multi_file-[rs].h5 core_file \ new_move_[ab].h5 ntypes.h5 dangle.h5 error_test.h5 \ @@ -1060,7 +1063,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -1080,6 +1083,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/testpar/Makefile.in b/testpar/Makefile.in index 147a05f..9940bfe 100644 --- a/testpar/Makefile.in +++ b/testpar/Makefile.in @@ -309,17 +309,21 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files # MPItest.h5 is from t_mpi # Para*.h5 are from testphdf # *.clog are from MPE option -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) MPItest.h5 Para*.h5 *.clog +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) MPItest.h5 Para*.h5 *.clog INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test # Test programs and scripts. These are our main targets. @@ -636,7 +640,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -656,6 +660,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/Makefile.in b/tools/Makefile.in index 4d5182e..b7f255b 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -285,13 +285,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # All subdirectories SUBDIRS = lib h5dump h5diff h5ls misc gifconv h5import h5repack h5jam @@ -638,7 +641,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -658,6 +661,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/gifconv/Makefile.in b/tools/gifconv/Makefile.in index b5b639d..b8c389a 100644 --- a/tools/gifconv/Makefile.in +++ b/tools/gifconv/Makefile.in @@ -308,13 +308,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include src and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -641,7 +644,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -661,6 +664,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in index b5e7c41..10bb0eb 100644 --- a/tools/h5diff/Makefile.in +++ b/tools/h5diff/Makefile.in @@ -316,15 +316,19 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files. *.h5 are generated by h5diff. They should # be copied to the testfiles/ directory if update is required -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 expect_sorted \ +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) *.h5 expect_sorted \ actual_sorted # Include src and tools/lib directories @@ -679,7 +683,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -699,6 +703,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in index f8d1b96..5f129c2 100644 --- a/tools/h5dump/Makefile.in +++ b/tools/h5dump/Makefile.in @@ -309,15 +309,19 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files. *.h5 are generated by h5dumpgentest. They should # copied to the testfiles/ directory if update is required. -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) *.h5 # Include files in /src directory and /tools/lib directory INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -654,7 +658,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -674,6 +678,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in index 4f1a039..062e65d 100755 --- a/tools/h5import/Makefile.in +++ b/tools/h5import/Makefile.in @@ -309,13 +309,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include src and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -648,7 +651,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -668,6 +671,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in index 6d0c4a7..ac870ae 100644 --- a/tools/h5jam/Makefile.in +++ b/tools/h5jam/Makefile.in @@ -304,12 +304,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 *.txt +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) *.h5 *.txt # # Copyright by the Board of Trustees of the University of Illinois. @@ -671,7 +675,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -691,6 +695,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in index 37187e3..65fe002 100644 --- a/tools/h5ls/Makefile.in +++ b/tools/h5ls/Makefile.in @@ -302,13 +302,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include src and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -628,7 +631,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -648,6 +651,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in index cc8452c..cc1fbbc 100644 --- a/tools/h5repack/Makefile.in +++ b/tools/h5repack/Makefile.in @@ -324,15 +324,19 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files. *.h5 are generated by h5repack. They should # copied to the testfiles/ directory if update is required. -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) *.h5 # Include src, test, and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib @@ -704,7 +708,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -724,6 +728,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in index 8509c3d..b628570 100644 --- a/tools/lib/Makefile.in +++ b/tools/lib/Makefile.in @@ -306,13 +306,16 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) # Include files in /src directory INCLUDES = -I$(top_srcdir)/src @@ -645,7 +648,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -665,6 +668,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. diff --git a/tools/misc/Makefile.am b/tools/misc/Makefile.am index 3e2e173..daf2323 100644 --- a/tools/misc/Makefile.am +++ b/tools/misc/Makefile.am @@ -61,12 +61,12 @@ else endif install-exec-local: - $(INSTALL) h5cc $(bindir)/$(H5CC_NAME) + @$(INSTALL) h5cc $(bindir)/$(H5CC_NAME) uninstall-local: - $(RM) $(bindir)/$(H5CC_NAME) + @$(RM) $(bindir)/$(H5CC_NAME) # How to build h5redeploy script h5redeploy: h5redeploy.in - cp $(srcdir)/$@.in $@ + @cp $(srcdir)/$@.in $@ include $(top_srcdir)/config/conclude.am diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in index 0f0eded..8ff5389 100644 --- a/tools/misc/Makefile.in +++ b/tools/misc/Makefile.in @@ -329,16 +329,20 @@ H5FC_PP = $(bindir)/h5pfc # Serial tests create .log and .logsh files. It's important only to clean log # files generated by HDF5's tests, because the .log suffix is used for # other files (e.g., config.log)! +# On the other hand, it is very hard to specify the exact name of .chksh and +# .logsh files because some scripts live in the source tree, not the build +# tree. Thus, we clean all .logsh and .chksh files. +CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ + $(TEST_PROG_CHKEXE:.chkexe_=.log) \ + $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ + *.chksh *.logsh + # Temporary files. *.h5 are generated by h5repart_gentest. They should # copied to the testfiles/ directory if update is required. fst_family*.h5 # and scd_family*.h5 were created by setting the HDF5_NOCLEANUP variable. -MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.chksh) \ - $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_SCRIPT_CHKSH:.chksh_=.logsh) *.h5 \ +MOSTLYCLEANFILES = $(CHECK_CLEANFILES) *.h5 \ ../testfiles/fst_family*.h5 ../testfiles/scd_family*.h5 # Include src directory @@ -721,13 +725,13 @@ uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \ check-install: installcheck install-exec-local: - $(INSTALL) h5cc $(bindir)/$(H5CC_NAME) + @$(INSTALL) h5cc $(bindir)/$(H5CC_NAME) uninstall-local: - $(RM) $(bindir)/$(H5CC_NAME) + @$(RM) $(bindir)/$(H5CC_NAME) # How to build h5redeploy script h5redeploy: h5redeploy.in - cp $(srcdir)/$@.in $@ + @cp $(srcdir)/$@.in $@ # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. @@ -737,7 +741,7 @@ build-lib: $(BUILT_SOURCES) $(LIB) build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p :: +lib progs tests check-s check-p check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -757,6 +761,10 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) install-doc uninstall-doc: @echo "Nothing to be done." +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. |