summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--release_docs/RELEASE.txt8
-rw-r--r--src/H5Dvirtual.c7
-rw-r--r--src/H5Shyper.c1053
-rw-r--r--src/H5Sselect.c11
-rw-r--r--test/vds.c720
5 files changed, 1459 insertions, 340 deletions
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt
index 6d1c8b2..649ae24 100644
--- a/release_docs/RELEASE.txt
+++ b/release_docs/RELEASE.txt
@@ -130,6 +130,14 @@ New Features
Library:
--------
+ - Improved the performance of virtual dataset I/O
+
+ Refactored the internal dataspace routines used by the virtual dataset
+ code to improve performance, especially when one of the selections
+ involved is very long and non-contiguous.
+
+ (NAF - 2019/05/31, HDFFV-10693)
+
- Allow pre-generated H5Tinit.c and H5make_libsettings.c to be used.
Rather than always running H5detect and generating H5Tinit.c and
diff --git a/src/H5Dvirtual.c b/src/H5Dvirtual.c
index e3e0aa5..53640e7 100644
--- a/src/H5Dvirtual.c
+++ b/src/H5Dvirtual.c
@@ -35,6 +35,13 @@
* until the virtual dataset is closed.
*/
+/*
+ * Note: H5S_select_project_intersection has been updated to no longer require
+ * that the source and source intersect spaces have the same extent. This file
+ * should therefore be updated to remove code that ensures this condition, which
+ * should improve both maintainability and performance.
+ */
+
/****************/
/* Module Setup */
/****************/
diff --git a/src/H5Shyper.c b/src/H5Shyper.c
index c2cdf2b..63f457b 100644
--- a/src/H5Shyper.c
+++ b/src/H5Shyper.c
@@ -44,25 +44,13 @@
/* Macro for checking if two ranges overlap one another */
/*
- * Three possible conditions for overlapping:
- * 1. The lower bound of range #1 is between the lower and
- * higher bounds of range #2. In other words, the low
- * part of range #1 will at least overlap with range #2.
- * 2. The higher bound of range #1 is between the lower and
- * higher bounds of range #2. In other words, the upper
- * part of range #1 will at least overlap with range #2.
- * 3. Range #1 includes range #2, i.e. the lower bound
- * is smaller than that of range #2 and the higher bound
- * is larger than that of range #2.
+ * Check for the inverse of whether the ranges are disjoint. If they are
+ * disjoint, then the low bound of one of the ranges must be greater than the
+ * high bound of the other.
*/
/* (Assumes that low & high bounds are _inclusive_) */
#define H5S_RANGE_OVERLAP(L1, H1, L2, H2) \
- /* condition 1 */ \
- (((L1) >= (L2) && (L1) <= (H2)) || \
- /* condition 2 */ \
- ((H1) >= (L2) && (H1) <= (H2)) || \
- /* condition 3 */ \
- ((L1) <= (L2) && (H1) >= (H2)))
+ (!((L1) > (H2) || (L2) > (H1)))
/* Flags for which hyperslab fragments to compute */
#define H5S_HYPER_COMPUTE_B_NOT_A 0x01
@@ -84,6 +72,18 @@
(curr_span) = saved_next_span; \
} while(0)
+/* Macro to add "skipped" elements to projection during the execution of
+ * H5S__hyper_project_intersect() */
+#define H5S_HYPER_PROJ_INT_ADD_SKIP(UDATA, ADD, ERR) \
+ do { \
+ /* If there are any elements to add, we must add them \
+ * to the projection first before adding skip */ \
+ if((UDATA)->nelem > 0) \
+ if(H5S__hyper_proj_int_build_proj(UDATA) < 0) \
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, ERR, "can't add elements to projected selection") \
+ (UDATA)->skip += (ADD); \
+ } while(0) /* end H5S_HYPER_PROJ_INT_ADD_SKIP() */
+
/******************/
/* Local Typedefs */
@@ -93,6 +93,28 @@
/* (Makes it easier to understand the alloc / free calls) */
typedef hsize_t hbounds_t;
+/* Struct for holding persistent information during iteration for
+ * H5S__hyper_project_intersect() */
+typedef struct {
+ const H5S_hyper_span_t *ds_span[H5S_MAX_RANK]; /* Array of the current spans in the destination space in each dimension */
+ hsize_t ds_low[H5S_MAX_RANK]; /* Array of current low bounds (of iteration) for each element in ds_span */
+ H5S_hyper_span_info_t *ps_span_info[H5S_MAX_RANK]; /* Array of span info structs for projected space during iteration */
+ uint32_t ps_clean_bitmap; /* Bitmap of whether the nth rank has a clean projected space since the last time it was set to 1 */
+ unsigned ss_rank; /* Rank of source space */
+ unsigned ds_rank; /* Rank of destination space */
+ unsigned depth; /* Current depth of iterator in destination space */
+ hsize_t skip; /* Number of elements to skip in projected space */
+ hsize_t nelem; /* Number of elements to add to projected space (after skip) */
+ uint64_t op_gen; /* Operation generation for counting elements */
+} H5S_hyper_project_intersect_ud_t;
+
+/* Assert that H5S_MAX_RANK is <= 32 so our trick with using a 32 bit bitmap
+ * (ps_clean_bitmap) works. If H5S_MAX_RANK increases either increase the size
+ * of ps_clean_bitmap or change the algorithm to use an array. */
+#if H5S_MAX_RANK > 32
+#error H5S_MAX_RANK too large for ps_clean_bitmap field in H5S_hyper_project_intersect_ud_t struct
+#endif
+
/********************/
/* Local Prototypes */
@@ -119,6 +141,8 @@ static herr_t H5S__hyper_clip_spans(H5S_hyper_span_info_t *a_spans,
unsigned ndims, H5S_hyper_span_info_t **a_not_b,
H5S_hyper_span_info_t **a_and_b, H5S_hyper_span_info_t **b_not_a);
static herr_t H5S__hyper_merge_spans(H5S_t *space, H5S_hyper_span_info_t *new_spans);
+static hsize_t H5S__hyper_spans_nelem_helper(H5S_hyper_span_info_t *spans,
+ uint64_t op_gen);
static hsize_t H5S__hyper_spans_nelem(H5S_hyper_span_info_t *spans);
static herr_t H5S__hyper_add_disjoint_spans(H5S_t *space, H5S_hyper_span_info_t *new_spans);
static H5S_hyper_span_info_t *H5S__hyper_make_spans(unsigned rank,
@@ -147,6 +171,10 @@ static herr_t H5S__hyper_iter_get_seq_list_opt(H5S_sel_iter_t *iter, size_t maxs
size_t maxelem, size_t *nseq, size_t *nelem, hsize_t *off, size_t *len);
static herr_t H5S__hyper_iter_get_seq_list_single(H5S_sel_iter_t *iter, size_t maxseq,
size_t maxelem, size_t *nseq, size_t *nelem, hsize_t *off, size_t *len);
+static herr_t H5S__hyper_proj_int_build_proj(H5S_hyper_project_intersect_ud_t *udata);
+static herr_t H5S__hyper_proj_int_iterate(const H5S_hyper_span_info_t *ss_span_info,
+ const H5S_hyper_span_info_t *sis_span_info, hsize_t count, unsigned depth,
+ H5S_hyper_project_intersect_ud_t *udata);
static void H5S__hyper_get_clip_diminfo(hsize_t start, hsize_t stride,
hsize_t *count, hsize_t *block, hsize_t clip_size);
static hsize_t H5S__hyper_get_clip_extent_real(const H5S_t *clip_space,
@@ -10442,6 +10470,579 @@ done:
/*--------------------------------------------------------------------------
NAME
+ H5S__hyper_proj_int_build_proj
+ PURPOSE
+ Secondary iteration routine for H5S__hyper_project_intersection
+ USAGE
+ herr_t H5S__hyper_proj_int_build_proj(udata)
+ H5S_hyper_project_intersect_ud_t *udata; IN/OUT: Persistent shared data for iteration
+ RETURNS
+ Non-negative on success/Negative on failure.
+ DESCRIPTION
+ Takes the skip and nelem amounts listed in udata and converts them to
+ span trees in the projected space, using the destination space. This
+ is a non-recursive algorithm by necessity, it saves the current state
+ of iteration in udata and resumes in the same location on subsequent
+ calls.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+static herr_t
+H5S__hyper_proj_int_build_proj(H5S_hyper_project_intersect_ud_t *udata) {
+ herr_t ret_value = SUCCEED; /* Return value */
+
+ FUNC_ENTER_STATIC
+
+ HDassert(udata->nelem > 0);
+
+ /*
+ * Skip over skipped elements
+ */
+ if(udata->skip > 0) {
+ /* Work upwards, finishing each span tree before moving up */
+ HDassert(udata->ds_span[udata->depth]);
+ do {
+ /* Check for lowest dimension */
+ if(udata->ds_span[udata->depth]->down) {
+ if(udata->ds_low[udata->depth] <= udata->ds_span[udata->depth]->high) {
+ /* If we will run out of elements to skip in this span,
+ * advance to the first not fully skipped span and break
+ * out of this loop (start moving downwards) */
+ if(udata->skip < H5S__hyper_spans_nelem_helper(udata->ds_span[udata->depth]->down, udata->op_gen)
+ * (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1)) {
+ udata->ds_low[udata->depth] += udata->skip / udata->ds_span[udata->depth]->down->u.nelmts;
+ udata->skip %= udata->ds_span[udata->depth]->down->u.nelmts;
+ break;
+ } /* end if */
+
+ /* Skip over this entire span */
+ udata->skip -= udata->ds_span[udata->depth]->down->u.nelmts
+ * (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1);
+ } /* end if */
+ } /* end if */
+ else {
+ HDassert(udata->ds_rank - udata->depth == 1);
+
+ /* If we will run out of elements to skip in this span,
+ * skip the remainder of the skipped elements and break out */
+ HDassert(udata->ds_low[udata->depth] <= udata->ds_span[udata->depth]->high);
+ if(udata->skip < (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1)) {
+ udata->ds_low[udata->depth] += udata->skip;
+ udata->skip = 0;
+ break;
+ } /* end if */
+
+ /* Skip over this entire span */
+ udata->skip -= udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1;
+ } /* end else */
+
+ /* Advance to next span */
+ udata->ds_span[udata->depth] = udata->ds_span[udata->depth]->next;
+ if(udata->ds_span[udata->depth])
+ udata->ds_low[udata->depth] = udata->ds_span[udata->depth]->low;
+ else if(udata->depth > 0) {
+ /* If present, append this span tree to the higher dimension's,
+ * and release ownership of it */
+ if(udata->ps_span_info[udata->depth]) {
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth - 1],
+ udata->ds_rank - udata->depth + 1, udata->ds_low[udata->depth - 1],
+ udata->ds_low[udata->depth - 1],
+ udata->ps_span_info[udata->depth]) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ H5S__hyper_free_span_info(udata->ps_span_info[udata->depth]);
+ udata->ps_span_info[udata->depth] = NULL;
+ } /* end if */
+
+ /* Ran out of spans, move up one dimension */
+ udata->depth--;
+ HDassert(udata->ds_span[udata->depth]);
+ udata->ds_low[udata->depth]++;
+ } /* end if */
+ else
+ HGOTO_ERROR(H5E_DATASPACE, H5E_BADVALUE, FAIL, "insufficient elements in destination selection")
+ } while((udata->skip > 0)
+ || (udata->ds_low[udata->depth] > udata->ds_span[udata->depth]->high));
+
+ /* Work downwards until skip is 0 */
+ HDassert(udata->ds_span[udata->depth]);
+ while(udata->skip > 0) {
+ HDassert(udata->ds_span[udata->depth]->down);
+ udata->depth++;
+ udata->ds_span[udata->depth] = udata->ds_span[udata->depth - 1]->down->head;
+ udata->ds_low[udata->depth] = udata->ds_span[udata->depth]->low;
+ if(udata->ds_span[udata->depth]->down) {
+ do {
+ /* If we will run out of elements to skip in this span,
+ * advance to the first not fully skipped span and
+ * continue down */
+ if(udata->skip < H5S__hyper_spans_nelem_helper(udata->ds_span[udata->depth]->down, udata->op_gen)
+ * (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1)) {
+ udata->ds_low[udata->depth] += udata->skip / udata->ds_span[udata->depth]->down->u.nelmts;
+ udata->skip %= udata->ds_span[udata->depth]->down->u.nelmts;
+ break;
+ } /* end if */
+
+ /* Skip over this entire span */
+ udata->skip -= udata->ds_span[udata->depth]->down->u.nelmts
+ * (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1);
+
+ /* Advance to next span */
+ udata->ds_span[udata->depth] = udata->ds_span[udata->depth]->next;
+ HDassert(udata->ds_span[udata->depth]);
+ udata->ds_low[udata->depth] = udata->ds_span[udata->depth]->low;
+ } while(udata->skip > 0);
+ } /* end if */
+ else {
+ do {
+ /* If we will run out of elements to skip in this span,
+ * skip the remainder of the skipped elements */
+ if(udata->skip < (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1)) {
+ udata->ds_low[udata->depth] += udata->skip;
+ udata->skip = 0;
+ break;
+ } /* end if */
+
+ /* Skip over this entire span */
+ udata->skip -= udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1;
+
+ /* Advance to next span */
+ udata->ds_span[udata->depth] = udata->ds_span[udata->depth]->next;
+ HDassert(udata->ds_span[udata->depth]);
+ udata->ds_low[udata->depth] = udata->ds_span[udata->depth]->low;
+ } while(udata->skip > 0);
+ } /* end else */
+ } /* end while */
+ } /* end if */
+
+ /*
+ * Add requested number of elements to projected space
+ */
+ /* Work upwards, adding all elements of each span tree until it can't fit
+ * all elements */
+ HDassert(udata->ds_span[udata->depth]);
+ do {
+ /* Check for lowest dimension */
+ if(udata->ds_span[udata->depth]->down) {
+ if(udata->ds_low[udata->depth] <= udata->ds_span[udata->depth]->high) {
+ /* If we will run out of elements to add in this span, add
+ * any complete spans, advance to the first not fully added
+ * span, and break out of this loop (start moving downwards)
+ */
+ if(udata->nelem < H5S__hyper_spans_nelem_helper(udata->ds_span[udata->depth]->down, udata->op_gen)
+ * (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1)) {
+ if(udata->nelem >= udata->ds_span[udata->depth]->down->u.nelmts) {
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth],
+ udata->ds_rank - udata->depth, udata->ds_low[udata->depth],
+ udata->ds_low[udata->depth] + (udata->nelem / udata->ds_span[udata->depth]->down->u.nelmts) - 1,
+ udata->ds_span[udata->depth]->down) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ udata->ds_low[udata->depth] += udata->nelem / udata->ds_span[udata->depth]->down->u.nelmts;
+ udata->nelem %= udata->ds_span[udata->depth]->down->u.nelmts;
+ } /* end if */
+ break;
+ } /* end if */
+
+ /* Append span tree for entire span */
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth],
+ udata->ds_rank - udata->depth, udata->ds_low[udata->depth],
+ udata->ds_span[udata->depth]->high,
+ udata->ds_span[udata->depth]->down) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ udata->nelem -= udata->ds_span[udata->depth]->down->u.nelmts
+ * (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1);
+ } /* end if */
+ } /* end if */
+ else {
+ HDassert(udata->ds_rank - udata->depth == 1);
+
+ /* If we will run out of elements to add in this span, add the
+ * remainder of the elements and break out */
+ HDassert(udata->ds_low[udata->depth] <= udata->ds_span[udata->depth]->high);
+ if(udata->nelem < (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1)) {
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth], 1,
+ udata->ds_low[udata->depth], udata->ds_low[udata->depth] + udata->nelem - 1, NULL) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ udata->ds_low[udata->depth] += udata->nelem;
+ udata->nelem = 0;
+ break;
+ } /* end if */
+
+ /* Append span tree for entire span */
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth], 1,
+ udata->ds_low[udata->depth], udata->ds_span[udata->depth]->high, NULL) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ udata->nelem -= udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1;
+ } /* end else */
+
+ /* Advance to next span */
+ udata->ds_span[udata->depth] = udata->ds_span[udata->depth]->next;
+ if(udata->ds_span[udata->depth])
+ udata->ds_low[udata->depth] = udata->ds_span[udata->depth]->low;
+ else if(udata->depth > 0) {
+ /* Append this span tree to the higher dimension's, and release
+ * ownership of it */
+ HDassert(udata->ps_span_info[udata->depth]);
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth - 1],
+ udata->ds_rank - udata->depth + 1, udata->ds_low[udata->depth - 1],
+ udata->ds_low[udata->depth - 1],
+ udata->ps_span_info[udata->depth]) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ H5S__hyper_free_span_info(udata->ps_span_info[udata->depth]);
+ udata->ps_span_info[udata->depth] = NULL;
+
+ /* Ran out of spans, move up one dimension */
+ udata->depth--;
+ HDassert(udata->ds_span[udata->depth]);
+ udata->ds_low[udata->depth]++;
+ } /* end if */
+ else {
+ /* We have finished the entire destination span tree. If there are
+ * still elements to add, issue an error. */
+ if(udata->nelem > 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_BADVALUE, FAIL, "insufficient elements in destination selection")
+ break;
+ } /* end else */
+ } while((udata->nelem > 0)
+ || (udata->ds_low[udata->depth] > udata->ds_span[udata->depth]->high));
+
+ /* Work downwards until nelem is 0 */
+ HDassert(udata->ds_span[udata->depth] || (udata->nelem == 0));
+ while(udata->nelem > 0) {
+ HDassert(udata->ds_span[udata->depth]->down);
+ udata->depth++;
+ udata->ds_span[udata->depth] = udata->ds_span[udata->depth - 1]->down->head;
+ udata->ds_low[udata->depth] = udata->ds_span[udata->depth]->low;
+ if(udata->ds_span[udata->depth]->down) {
+ do {
+ /* If we will run out of elements to add in this span, add
+ * any complete spans, advance to the first not fully added
+ * span and continue down
+ */
+ HDassert(udata->ds_low[udata->depth] <= udata->ds_span[udata->depth]->high);
+ if(udata->nelem < H5S__hyper_spans_nelem_helper(udata->ds_span[udata->depth]->down, udata->op_gen)
+ * (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1)) {
+ if(udata->nelem >= udata->ds_span[udata->depth]->down->u.nelmts) {
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth],
+ udata->ds_rank - udata->depth, udata->ds_low[udata->depth],
+ udata->ds_low[udata->depth] + (udata->nelem / udata->ds_span[udata->depth]->down->u.nelmts) - 1,
+ udata->ds_span[udata->depth]->down) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ udata->ds_low[udata->depth] += udata->nelem / udata->ds_span[udata->depth]->down->u.nelmts;
+ udata->nelem %= udata->ds_span[udata->depth]->down->u.nelmts;
+ } /* end if */
+ break;
+ } /* end if */
+
+ /* Append span tree for entire span */
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth],
+ udata->ds_rank - udata->depth, udata->ds_low[udata->depth],
+ udata->ds_span[udata->depth]->high,
+ udata->ds_span[udata->depth]->down) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ udata->nelem -= udata->ds_span[udata->depth]->down->u.nelmts
+ * (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1);
+
+ /* Advance to next span */
+ udata->ds_span[udata->depth] = udata->ds_span[udata->depth]->next;
+ HDassert(udata->ds_span[udata->depth]);
+ udata->ds_low[udata->depth] = udata->ds_span[udata->depth]->low;
+ } while(udata->nelem > 0);
+ } /* end if */
+ else {
+ HDassert(udata->ds_rank - udata->depth == 1);
+ do {
+ /* If we will run out of elements to add in this span, add
+ * the remainder of the elements and break out */
+ HDassert(udata->ds_low[udata->depth] <= udata->ds_span[udata->depth]->high);
+ if(udata->nelem < (udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1)) {
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth], 1,
+ udata->ds_low[udata->depth], udata->ds_low[udata->depth] + udata->nelem - 1, NULL) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ udata->ds_low[udata->depth] += udata->nelem;
+ udata->nelem = 0;
+ break;
+ } /* end if */
+
+ /* Append span tree for entire span */
+ if(H5S__hyper_append_span(&udata->ps_span_info[udata->depth], 1,
+ udata->ds_low[udata->depth], udata->ds_span[udata->depth]->high, NULL) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ udata->nelem -= udata->ds_span[udata->depth]->high - udata->ds_low[udata->depth] + 1;
+
+ /* Advance to next span */
+ udata->ds_span[udata->depth] = udata->ds_span[udata->depth]->next;
+ HDassert(udata->ds_span[udata->depth]);
+ udata->ds_low[udata->depth] = udata->ds_span[udata->depth]->low;
+ } while(udata->nelem > 0);
+ } /* end else */
+ } /* end while */
+
+ HDassert(udata->skip == 0);
+ HDassert(udata->nelem == 0);
+
+ /* Mark projected space as changed (for all ranks) */
+ udata->ps_clean_bitmap = 0;
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5S__hyper_proj_int_build_proj() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+ H5S__hyper_proj_int_iterate
+ PURPOSE
+ Main iteration routine for H5S__hyper_project_intersection
+ USAGE
+ herr_t H5S__hyper_proj_int_iterate(ss_span_info,sis_span_info,count,depth,udata)
+ const H5S_hyper_span_info_t *ss_span_info; IN: Span tree for source selection
+ const H5S_hyper_span_info_t *sis_span_info; IN: Span tree for source intersect selection
+ hsize_t count; IN: Number of times to compute the intersection of ss_span_info and sis_span_info
+ unsigned depth; IN: Depth of iteration (in terms of rank)
+ H5S_hyper_project_intersect_ud_t *udata; IN/OUT: Persistent shared data for iteration
+ RETURNS
+ Non-negative on success/Negative on failure.
+ DESCRIPTION
+ Computes the intersection of ss_span_info and sis_span_info and projects it
+ to the projected space (held in udata). It accomplishes this by iterating
+ over both spaces and computing the number of elements to skip (in
+ ss_span_info) and the number of elements to add (the intersection) in a
+ sequential fashion (similar to run length encoding). As necessary, this
+ function both recurses into lower dimensions and calls
+ H5S__hyper_proj_int_build_proj to convert the skip/nelem pairs to the
+ projected span tree.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+static herr_t
+H5S__hyper_proj_int_iterate(const H5S_hyper_span_info_t *ss_span_info,
+ const H5S_hyper_span_info_t *sis_span_info, hsize_t count, unsigned depth,
+ H5S_hyper_project_intersect_ud_t *udata)
+{
+ const H5S_hyper_span_t *ss_span; /* Current span in source space */
+ const H5S_hyper_span_t *sis_span; /* Current span in source intersect space */
+ hsize_t ss_low; /* Current low bounds of source span */
+ hsize_t sis_low; /* Current low bounds of source intersect span */
+ hsize_t high; /* High bounds of current intersection */
+ hsize_t low; /* Low bounds of current intersection */
+ hsize_t old_skip; /* Value of udata->skip before main loop */
+ hsize_t old_nelem; /* Value of udata->nelem before main loop */
+ hbool_t check_intersect; /* Whether to check for intersecting elements */
+ unsigned u; /* Local index variable */
+ herr_t ret_value = SUCCEED; /* Return value */
+
+ FUNC_ENTER_STATIC
+
+ /* Check for non-overlapping bounds */
+ check_intersect = TRUE;
+ for(u = 0; u < (udata->ss_rank - depth); u++)
+ if(!H5S_RANGE_OVERLAP(ss_span_info->low_bounds[u],
+ ss_span_info->high_bounds[u],
+ sis_span_info->low_bounds[u],
+ sis_span_info->high_bounds[u])) {
+ check_intersect = FALSE;
+ break;
+ } /* end if */
+
+ /* Only enter main loop if there's something to do */
+ if(check_intersect) {
+ /* Set ps_clean_bitmap */
+ udata->ps_clean_bitmap |= (((uint32_t)1) << depth);
+
+ /* Save old skip and nelem */
+ old_skip = udata->skip;
+ old_nelem = udata->nelem;
+
+ /* Intersect spaces once per count */
+ for(u = 0; u < count; u++) {
+ ss_span = ss_span_info->head;
+ sis_span = sis_span_info->head;
+ HDassert(ss_span && sis_span);
+ ss_low = ss_span->low;
+ sis_low = sis_span->low;
+
+ /* Main loop */
+ do {
+ /* Check if spans overlap */
+ if(H5S_RANGE_OVERLAP(ss_low, ss_span->high,
+ sis_low, sis_span->high)) {
+ high = MIN(ss_span->high, sis_span->high);
+ if(ss_span->down) {
+ /* Add skipped elements if there's a pre-gap */
+ if(ss_low < sis_low) {
+ low = sis_low;
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, H5S__hyper_spans_nelem_helper(ss_span->down, udata->op_gen) * (sis_low - ss_low), FAIL);
+ } /* end if */
+ else
+ low = ss_low;
+
+ /* Recurse into next dimension down */
+ if(H5S__hyper_proj_int_iterate(ss_span->down, sis_span->down, high - low + 1, depth + 1, udata) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTCOMPARE, FAIL, "can't iterate over source selections")
+ } /* end if */
+ else {
+ HDassert(depth == udata->ss_rank - 1);
+
+ /* Add skipped elements if there's a pre-gap */
+ if(ss_low < sis_low) {
+ low = sis_low;
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, sis_low - ss_low, FAIL);
+ } /* end if */
+ else
+ low = ss_low;
+
+ /* Add overlapping elements */
+ udata->nelem += high - low + 1;
+ } /* end else */
+
+ /* Advance spans */
+ if(ss_span->high == sis_span->high) {
+ /* Advance both spans */
+ ss_span = ss_span->next;
+ if(ss_span)
+ ss_low = ss_span->low;
+ sis_span = sis_span->next;
+ if(sis_span)
+ sis_low = sis_span->low;
+ } /* end if */
+ else if(ss_span->high == high) {
+ /* Advance source span */
+ HDassert(ss_span->high < sis_span->high);
+ sis_low = high + 1;
+ ss_span = ss_span->next;
+ if(ss_span)
+ ss_low = ss_span->low;
+ } /* end if */
+ else {
+ /* Advance source intersect span */
+ HDassert(ss_span->high > sis_span->high);
+ ss_low = high + 1;
+ sis_span = sis_span->next;
+ if(sis_span)
+ sis_low = sis_span->low;
+ } /* end else */
+ } /* end if */
+ else {
+ /* Advance spans */
+ if(ss_span->high < sis_low) {
+ /* Add skipped elements */
+ if(ss_span->down)
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, H5S__hyper_spans_nelem_helper(ss_span->down, udata->op_gen) * (ss_span->high - ss_low + 1), FAIL);
+ else
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, ss_span->high - ss_low + 1, FAIL);
+
+ /* Advance source span */
+ ss_span = ss_span->next;
+ if(ss_span)
+ ss_low = ss_span->low;
+ } /* end if */
+ else {
+ /* Advance source intersect span */
+ HDassert(ss_low > sis_span->high);
+ sis_span = sis_span->next;
+ if(sis_span)
+ sis_low = sis_span->low;
+ } /* end else */
+ } /* end else */
+ } while(ss_span && sis_span);
+
+ if(ss_span && !((depth == 0) && (u == count - 1))) {
+ /* Count remaining elements in ss_span_info */
+ if(ss_span->down) {
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, H5S__hyper_spans_nelem_helper(ss_span->down, udata->op_gen) * (ss_span->high - ss_low + 1), FAIL);
+ ss_span = ss_span->next;
+ while(ss_span) {
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, H5S__hyper_spans_nelem_helper(ss_span->down, udata->op_gen) * (ss_span->high - ss_span->low + 1), FAIL);
+ ss_span = ss_span->next;
+ } /* end while */
+ } /* end if */
+ else {
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, ss_span->high - ss_low + 1, FAIL);
+ ss_span = ss_span->next;
+ while(ss_span) {
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, ss_span->high - ss_span->low + 1, FAIL);
+ ss_span = ss_span->next;
+ } /* end while */
+ } /* end else */
+ } /* end if */
+
+ /* Check if the projected space was not changed since we started the
+ * first iteration of the loop, if so we do not need to continue
+ * looping and can just copy the result */
+ if(udata->ps_clean_bitmap & (((uint32_t)1) << depth)) {
+ HDassert(u == 0);
+ if(udata->skip == old_skip) {
+ /* First case: algorithm added only elements */
+ HDassert(udata->nelem >= old_nelem);
+ udata->nelem += (count - 1) * (udata->nelem - old_nelem);
+ } /* end if */
+ else if(udata->nelem == 0) {
+ /* Second case: algorithm added only skip. In this case,
+ * nelem must be 0 since otherwise adding skip would have
+ * triggered a change in the projected space */
+ HDassert(old_nelem == 0);
+ HDassert(udata->skip > old_skip);
+ udata->skip += (count - 1) * (udata->skip - old_skip);
+ } /* end if */
+ else {
+ /* Third case: agorithm added skip and nelem (in that
+ * order). Add the same skip and nelem once for each item
+ * remaining in count. */
+ hsize_t skip_add;
+ hsize_t nelem_add;
+
+ HDassert(udata->nelem > 0);
+ HDassert(udata->skip > old_skip);
+ HDassert(old_nelem == 0);
+
+ skip_add = udata->skip - old_skip;
+ nelem_add = udata->nelem - old_nelem;
+ for(u = 1; u < count; u++) {
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, skip_add, FAIL);
+ udata->nelem += nelem_add;
+ } /* end for */
+ } /* end else */
+
+ /* End loop since we already took care of it */
+ break;
+ } /* end if */
+ } /* end for */
+ } /* end if */
+ else if(depth > 0)
+ /* Just count skipped elements */
+ H5S_HYPER_PROJ_INT_ADD_SKIP(udata, H5S__hyper_spans_nelem_helper((H5S_hyper_span_info_t *)ss_span_info, udata->op_gen) * count, FAIL); /* Casting away const OK -NAF */
+
+ /* Clean up if we are done */
+ if(depth == 0) {
+ /* Add remaining elements */
+ if(udata->nelem > 0)
+ if(H5S__hyper_proj_int_build_proj(udata) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't add elements to projected selection")
+
+ /* Append remaining span trees */
+ for(u = udata->ds_rank - 1; u > 0; u--)
+ if(udata->ps_span_info[u]) {
+ if(H5S__hyper_append_span(&udata->ps_span_info[u - 1],
+ udata->ds_rank - u + 1, udata->ds_low[u - 1],
+ udata->ds_low[u - 1],
+ udata->ps_span_info[u]) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ H5S__hyper_free_span_info(udata->ps_span_info[u]);
+ udata->ps_span_info[u] = NULL;
+ } /* end if */
+ } /* end if */
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5S__hyper_proj_int_iterate() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
H5S__hyper_project_intersection
PURPOSE
Projects the intersection of of the selections of src_space and
@@ -10461,7 +11062,9 @@ done:
within the selection of dst_space. The result is placed in the selection
of proj_space. Note src_space, dst_space, and src_intersect_space do not
need to use hyperslab selections, but they cannot use point selections.
- The result is always a hyperslab selection.
+ The result is always a hyperslab or none selection. Note also that
+ proj_space can share some span trees with dst_space, so proj_space
+ must not be subsequently modified if dst_space must be preserved.
GLOBAL VARIABLES
COMMENTS, BUGS, ASSUMPTIONS
EXAMPLES
@@ -10471,43 +11074,11 @@ herr_t
H5S__hyper_project_intersection(const H5S_t *src_space, const H5S_t *dst_space,
const H5S_t *src_intersect_space, H5S_t *proj_space)
{
- hsize_t ss_off[H5S_PROJECT_INTERSECT_NSEQS]; /* Offset array for src_space */
- size_t ss_len[H5S_PROJECT_INTERSECT_NSEQS]; /* Length array for src_space */
- size_t ss_nseq; /* Number of sequences for src_space */
- size_t ss_nelem; /* Number of elements for src_space */
- size_t ss_i = (size_t)0; /* Index into offset/length arrays for src_space */
- hbool_t advance_ss = FALSE; /* Whether to advance ss_i on the next iteration */
- H5S_sel_iter_t *ss_iter = NULL; /* Selection iterator for src_space */
- hbool_t ss_iter_init = FALSE; /* Whether ss_iter is initialized */
- hsize_t ss_sel_off = (hsize_t)0; /* Offset within src_space selection */
- hsize_t ds_off[H5S_PROJECT_INTERSECT_NSEQS]; /* Offset array for dst_space */
- size_t ds_len[H5S_PROJECT_INTERSECT_NSEQS]; /* Length array for dst_space */
- size_t ds_nseq; /* Number of sequences for dst_space */
- size_t ds_nelem; /* Number of elements for dst_space */
- size_t ds_i = (size_t)0; /* Index into offset/length arrays for dst_space */
- H5S_sel_iter_t *ds_iter = NULL; /* Selection iterator for dst_space */
- hbool_t ds_iter_init = FALSE; /* Whether ds_iter is initialized */
- hsize_t ds_sel_off = (hsize_t)0; /* Offset within dst_space selection */
- hsize_t sis_off[H5S_PROJECT_INTERSECT_NSEQS]; /* Offset array for src_intersect_space */
- size_t sis_len[H5S_PROJECT_INTERSECT_NSEQS]; /* Length array for src_intersect_space */
- size_t sis_nseq; /* Number of sequences for src_intersect_space */
- size_t sis_nelem; /* Number of elements for src_intersect_space */
- size_t sis_i = (size_t)0; /* Index into offset/length arrays for src_intersect_space */
- hbool_t advance_sis = FALSE; /* Whether to advance sis_i on the next iteration */
- H5S_sel_iter_t *sis_iter = NULL; /* Selection iterator for src_intersect_space */
- hbool_t sis_iter_init = FALSE; /* Whether sis_iter is initialized */
- hsize_t int_sel_off; /* Offset within intersected selections (ss/sis and ds/ps) */
- size_t int_len; /* Length of segment in intersected selections */
- hsize_t proj_off; /* Segment offset in proj_space */
- size_t proj_len; /* Segment length in proj_space */
- size_t proj_len_rem; /* Remaining length in proj_space for segment */
- hsize_t proj_down_dims[H5S_MAX_RANK]; /* "Down" dimensions in proj_space */
- H5S_hyper_span_info_t *curr_span_tree[H5S_MAX_RANK]; /* Current span tree being built (in each dimension) */
- hsize_t curr_span_up_dim[H5S_MAX_RANK]; /* "Up" dimensions for current span */
- unsigned proj_rank; /* Rank of proj_space */
- hsize_t low; /* Low value of span */
- size_t nelem; /* Number of elements returned for get_seq_list op */
- unsigned u; /* Local index variable */
+ H5S_hyper_project_intersect_ud_t udata; /* User data for subroutines */
+ const H5S_hyper_span_info_t *ss_span_info;
+ const H5S_hyper_span_info_t *ds_span_info;
+ H5S_hyper_span_info_t *ss_span_info_buf = NULL;
+ H5S_hyper_span_info_t *ds_span_info_buf = NULL;
herr_t ret_value = SUCCEED; /* Return value */
FUNC_ENTER_PACKAGE
@@ -10521,280 +11092,88 @@ H5S__hyper_project_intersection(const H5S_t *src_space, const H5S_t *dst_space,
/* Assert that src_space and src_intersect_space have same extent and there
* are no point selections */
HDassert(H5S_GET_EXTENT_NDIMS(src_space) == H5S_GET_EXTENT_NDIMS(src_intersect_space));
- HDassert(!HDmemcmp(src_space->extent.size, src_intersect_space->extent.size,
- (size_t)H5S_GET_EXTENT_NDIMS(src_space) * sizeof(src_space->extent.size[0])));
+ HDassert(H5S_GET_SELECT_NPOINTS(src_space) == H5S_GET_SELECT_NPOINTS(dst_space));
HDassert(H5S_GET_SELECT_TYPE(src_space) != H5S_SEL_POINTS);
HDassert(H5S_GET_SELECT_TYPE(dst_space) != H5S_SEL_POINTS);
- HDassert(H5S_GET_SELECT_TYPE(src_intersect_space) != H5S_SEL_POINTS);
-
- /* Initialize prev_space, curr_span_tree, and curr_span_up_dim */
- HDmemset(curr_span_tree, 0, sizeof(curr_span_tree));
- HDmemset(curr_span_up_dim, 0, sizeof(curr_span_up_dim));
+ HDassert(H5S_GET_SELECT_TYPE(src_intersect_space) == H5S_SEL_HYPERSLABS);
- /* Save rank of projected space */
- proj_rank = proj_space->extent.rank;
- HDassert(proj_rank > 0);
+ /* Set up ss_span_info */
+ if(H5S_GET_SELECT_TYPE(src_space) == H5S_SEL_HYPERSLABS) {
+ /* Make certain the selection has a span tree */
+ if(NULL == src_space->select.sel_info.hslab->span_lst)
+ if(H5S__hyper_generate_spans((H5S_t *)src_space) < 0) /* Casting away const OK -NAF */
+ HGOTO_ERROR(H5E_DATASPACE, H5E_UNINITIALIZED, FAIL, "can't construct span tree for source hyperslab selection")
- /* Get numbers of elements */
- ss_nelem = (size_t)H5S_GET_SELECT_NPOINTS(src_space);
- ds_nelem = (size_t)H5S_GET_SELECT_NPOINTS(dst_space);
- sis_nelem = (size_t)H5S_GET_SELECT_NPOINTS(src_intersect_space);
- HDassert(ss_nelem == ds_nelem);
-
- /* Calculate proj_down_dims */
- if(H5VM_array_down(proj_rank, proj_space->extent.size, proj_down_dims) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTSET, FAIL, "can't compute 'down' chunk size value")
-
- /* Remove current selection from proj_space */
- if(H5S_SELECT_RELEASE(proj_space) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't release selection")
-
- /* If any selections are empty, skip to the end so "none" is selected */
- if((ss_nelem == 0) || (ds_nelem == 0) || (sis_nelem == 0))
- goto loop_end;
-
- /* Allocate space for the hyperslab selection information (note this sets
- * diminfo_valid to FALSE, diminfo arrays to 0, and span list to NULL) */
- if(NULL == (proj_space->select.sel_info.hslab = H5FL_CALLOC(H5S_hyper_sel_t)))
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTALLOC, FAIL, "can't allocate hyperslab info")
-
- /* Set selection type */
- proj_space->select.type = H5S_sel_hyper;
-
- /* Set unlim_dim */
- proj_space->select.sel_info.hslab->unlim_dim = -1;
-
- /* Allocate the source selection iterator */
- if(NULL == (ss_iter = H5FL_MALLOC(H5S_sel_iter_t)))
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTALLOC, FAIL, "can't allocate source selection iterator")
-
- /* Initialize source space iterator */
- if(H5S_select_iter_init(ss_iter, src_space, (size_t)1, 0) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINIT, FAIL, "unable to initialize selection iterator")
- ss_iter_init = TRUE;
-
- /* Get sequence list for source space */
- if(H5S_SELECT_ITER_GET_SEQ_LIST(ss_iter, H5S_PROJECT_INTERSECT_NSEQS, ss_nelem, &ss_nseq, &nelem, ss_off, ss_len) < 0)
- HGOTO_ERROR(H5E_INTERNAL, H5E_UNSUPPORTED, FAIL, "sequence length generation failed")
- ss_nelem -= nelem;
- HDassert(ss_nseq > 0);
-
- /* Allocate the destination selection iterator */
- if(NULL == (ds_iter = H5FL_MALLOC(H5S_sel_iter_t)))
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTALLOC, FAIL, "can't allocate destination selection iterator")
-
- /* Initialize destination space iterator */
- if(H5S_select_iter_init(ds_iter, dst_space, (size_t)1, 0) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINIT, FAIL, "unable to initialize selection iterator")
- ds_iter_init = TRUE;
-
- /* Get sequence list for destination space */
- if(H5S_SELECT_ITER_GET_SEQ_LIST(ds_iter, H5S_PROJECT_INTERSECT_NSEQS, ds_nelem, &ds_nseq, &nelem, ds_off, ds_len) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINIT, FAIL, "unable to initialize selection iterator")
- ds_nelem -= nelem;
- HDassert(ds_nseq > 0);
-
- /* Allocate the source intersect space iterator */
- if(NULL == (sis_iter = H5FL_MALLOC(H5S_sel_iter_t)))
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTALLOC, FAIL, "can't allocate source intersect space iterator")
-
- /* Initialize source intersect space iterator */
- if(H5S_select_iter_init(sis_iter, src_intersect_space, (size_t)1, 0) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINIT, FAIL, "unable to initialize selection iterator")
- sis_iter_init = TRUE;
-
- /* Get sequence list for source intersect space */
- if(H5S_SELECT_ITER_GET_SEQ_LIST(sis_iter, H5S_PROJECT_INTERSECT_NSEQS, sis_nelem, &sis_nseq, &nelem, sis_off, sis_len) < 0)
- HGOTO_ERROR(H5E_INTERNAL, H5E_UNSUPPORTED, FAIL, "sequence length generation failed")
- sis_nelem -= nelem;
- HDassert(sis_nseq > 0);
-
- /* Loop until we run out of sequences in either the source or source
- * intersect space */
- while(1) {
- while(advance_ss || (ss_off[ss_i] + ss_len[ss_i] <= sis_off[sis_i])) {
- /* Either we finished the current source sequence or the
- * sequences do not intersect. Advance source space. */
- ss_sel_off += (hsize_t)ss_len[ss_i];
- if(++ss_i == ss_nseq) {
- if(ss_nelem > 0) {
- /* Try to grab more sequences from src_space */
- if(H5S_SELECT_ITER_GET_SEQ_LIST(ss_iter, H5S_PROJECT_INTERSECT_NSEQS, ss_nelem, &ss_nseq, &nelem, ss_off, ss_len) < 0)
- HGOTO_ERROR(H5E_INTERNAL, H5E_UNSUPPORTED, FAIL, "sequence length generation failed")
- HDassert(ss_len[0] > 0);
-
- /* Update ss_nelem */
- HDassert(nelem > 0);
- HDassert(nelem <= ss_nelem);
- ss_nelem -= nelem;
-
- /* Reset source space index */
- ss_i = 0;
- } /* end if */
- else
- /* There are no more sequences in src_space, so we can exit
- * the loop. Use goto instead of break so we exit the outer
- * loop. */
- goto loop_end;
- } /* end if */
+ /* Simply point to existing span tree */
+ ss_span_info = src_space->select.sel_info.hslab->span_lst;
+ } /* end if */
+ else {
+ /* Create temporary span tree from all selection */
+ HDassert(H5S_GET_SELECT_TYPE(src_space) == H5S_SEL_ALL);
- /* Reset advance_ss */
- advance_ss = FALSE;
- } /* end while */
- if(advance_sis || (sis_off[sis_i] + sis_len[sis_i] <= ss_off[ss_i])) {
- do {
- /* Either we finished the current source intersect sequence or
- * the sequences do not intersect. Advance source intersect
- * space. */
- if(++sis_i == sis_nseq) {
- if(sis_nelem > 0) {
- /* Try to grab more sequences from src_intersect_space
- */
- if(H5S_SELECT_ITER_GET_SEQ_LIST(sis_iter, H5S_PROJECT_INTERSECT_NSEQS, sis_nelem, &sis_nseq, &nelem, sis_off, sis_len) < 0)
- HGOTO_ERROR(H5E_INTERNAL, H5E_UNSUPPORTED, FAIL, "sequence length generation failed")
- HDassert(sis_len[0] > 0);
+ if(NULL == (ss_span_info_buf = H5S__hyper_make_spans(H5S_GET_EXTENT_NDIMS(src_space),
+ H5S_hyper_zeros_g, H5S_hyper_zeros_g, H5S_hyper_ones_g, src_space->extent.size)))
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINIT, FAIL, "can't create span tree for ALL source space")
+ ss_span_info = ss_span_info_buf;
+ } /* end else */
- /* Update ss_nelem */
- HDassert(nelem > 0);
- HDassert(nelem <= sis_nelem);
- sis_nelem -= nelem;
+ /* Set up ds_span_info */
+ if(H5S_GET_SELECT_TYPE(dst_space) == H5S_SEL_HYPERSLABS) {
+ /* Make certain the selection has a span tree */
+ if(NULL == dst_space->select.sel_info.hslab->span_lst)
+ if(H5S__hyper_generate_spans((H5S_t *)dst_space) < 0) /* Casting away const OK -NAF */
+ HGOTO_ERROR(H5E_DATASPACE, H5E_UNINITIALIZED, FAIL, "can't construct span tree for dsetination hyperslab selection")
- /* Reset source space index */
- sis_i = 0;
- } /* end if */
- else
- /* There are no more sequences in src_intersect_space,
- * so we can exit the loop. Use goto instead of break
- * so we exit the outer loop. */
- goto loop_end;
- } /* end if */
- } while(sis_off[sis_i] + sis_len[sis_i] <= ss_off[ss_i]);
-
- /* Reset advance_sis */
- advance_sis = FALSE;
- } /* end if */
- else {
- /* Sequences intersect, add intersection to projected space */
- /* Calculate intersection sequence in terms of offset within source
- * selection and advance any sequences we complete */
- if(ss_off[ss_i] >= sis_off[sis_i])
- int_sel_off = ss_sel_off;
- else
- int_sel_off = sis_off[sis_i] - ss_off[ss_i] + ss_sel_off;
- if((ss_off[ss_i] + (hsize_t)ss_len[ss_i]) <= (sis_off[sis_i]
- + (hsize_t)sis_len[sis_i])) {
- int_len = (size_t)((hsize_t)ss_len[ss_i] + ss_sel_off - int_sel_off);
- advance_ss = TRUE;
- } /* end if */
- else
- int_len = (size_t)(sis_off[sis_i] + (hsize_t)sis_len[sis_i] - ss_off[ss_i] + ss_sel_off - int_sel_off);
- if((ss_off[ss_i] + (hsize_t)ss_len[ss_i]) >= (sis_off[sis_i]
- + (hsize_t)sis_len[sis_i]))
- advance_sis = TRUE;
-
- /* Project intersection sequence to destination selection */
- while(int_len > (size_t)0) {
- while(ds_sel_off + (hsize_t)ds_len[ds_i] <= int_sel_off) {
- /* Intersection is not projected to this destination
- * sequence, advance destination space */
- ds_sel_off += (hsize_t)ds_len[ds_i];
- if(++ds_i == ds_nseq) {
- HDassert(ds_nelem > 0);
-
- /* Try to grab more sequences from dst_space */
- if(H5S_SELECT_ITER_GET_SEQ_LIST(ds_iter, H5S_PROJECT_INTERSECT_NSEQS, ds_nelem, &ds_nseq, &nelem, ds_off, ds_len) < 0)
- HGOTO_ERROR(H5E_INTERNAL, H5E_UNSUPPORTED, FAIL, "sequence length generation failed")
- HDassert(ds_len[0] > 0);
-
- /* Update ss_nelem */
- HDassert(nelem > 0);
- HDassert(nelem <= ds_nelem);
- ds_nelem -= nelem;
-
- /* Reset source space index */
- ds_i = 0;
- } /* end if */
- } /* end while */
+ /* Simply point to existing span tree */
+ ds_span_info = dst_space->select.sel_info.hslab->span_lst;
+ } /* end if */
+ else {
+ /* Create temporary span tree from all selection */
+ HDassert(H5S_GET_SELECT_TYPE(dst_space) == H5S_SEL_ALL);
- /* Add sequence to projected space */
- HDassert(ds_sel_off <= int_sel_off);
- proj_off = ds_off[ds_i] + int_sel_off - ds_sel_off;
- proj_len = proj_len_rem = (size_t)MIN(int_len,
- (size_t)(ds_sel_off + (hsize_t)ds_len[ds_i] - int_sel_off));
-
- /* Add to span tree */
- while(proj_len_rem > (size_t)0) {
- hsize_t high; /* High value of span */
- size_t span_len; /* Length of span */
-
- /* Append spans in higher dimensions if we're going ouside
- * the plane of the span currently being built (i.e. it's
- * finished being built) */
- /* Check for more than one full row (in every dim) and
- * append multiple spans at once? -NAF */
- for(u = proj_rank - 1; ((u > 0)
- && ((proj_off / proj_down_dims[u - 1])
- != curr_span_up_dim[u - 1])); u--) {
- if(curr_span_tree[u]) {
- /* Append complete lower dimension span tree to
- * current dimension */
- low = curr_span_up_dim[u - 1] % proj_space->extent.size[u - 1];
- if(H5S__hyper_append_span(&curr_span_tree[u - 1], (proj_rank - u) + 1, low, low, curr_span_tree[u]) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ if(NULL == (ds_span_info_buf = H5S__hyper_make_spans(H5S_GET_EXTENT_NDIMS(dst_space),
+ H5S_hyper_zeros_g, H5S_hyper_zeros_g, H5S_hyper_ones_g, dst_space->extent.size)))
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINIT, FAIL, "can't create span tree for ALL destination space")
+ ds_span_info = ds_span_info_buf;
+ } /* end else */
- /* Reset lower dimension's span tree and previous
- * span since we just committed it and will start
- * over with a new one */
- H5S__hyper_free_span_info(curr_span_tree[u]);
- curr_span_tree[u] = NULL;
- } /* end if */
+ /* Make certain the source intersect selection has a span tree */
+ if(NULL == src_intersect_space->select.sel_info.hslab->span_lst)
+ if(H5S__hyper_generate_spans((H5S_t *)src_intersect_space) < 0) /* Casting away const OK -NAF */
+ HGOTO_ERROR(H5E_DATASPACE, H5E_UNINITIALIZED, FAIL, "can't construct span tree for source intersect hyperslab selection")
- /* Update curr_span_up_dim */
- curr_span_up_dim[u - 1] = proj_off / proj_down_dims[u - 1];
- } /* end for */
+ /* Initialize udata */
+ HDmemset(&udata, 0, sizeof(udata));
+ udata.ds_span[0] = ds_span_info->head;
+ udata.ds_low[0] = udata.ds_span[0]->low;
+ udata.ss_rank = H5S_GET_EXTENT_NDIMS(src_space);
+ udata.ds_rank = H5S_GET_EXTENT_NDIMS(dst_space);
+ udata.op_gen = H5S__hyper_get_op_gen();
- /* Compute bounds for new span in lowest dimension */
- low = proj_off % proj_space->extent.size[proj_rank - 1];
- span_len = MIN(proj_len_rem,
- (size_t)(proj_space->extent.size[proj_rank - 1]
- - low));
- HDassert(proj_len_rem >= span_len);
- high = (low + (hsize_t)span_len) - (hsize_t)1;
+ /* Iterate over selections and build projected span tree */
+ if(H5S__hyper_proj_int_iterate(ss_span_info, src_intersect_space->select.sel_info.hslab->span_lst, 1, 0, &udata) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTCOMPARE, FAIL, "selection iteration failed")
- /* Append span in lowest dimension */
- if(H5S__hyper_append_span(&curr_span_tree[proj_rank - 1], 1, low, high, NULL) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ /* Remove current selection from proj_space */
+ if(H5S_SELECT_RELEASE(proj_space) < 0)
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't release selection")
- /* Update remaining offset and length */
- proj_off += (hsize_t)span_len;
- proj_len_rem -= span_len;
- } /* end while */
+ /* Check for elements in projected space */
+ if(udata.ps_span_info[0]) {
+ /* Allocate space for the hyperslab selection information (note this sets
+ * diminfo_valid to FALSE, diminfo arrays to 0, and span list to NULL) */
+ if(NULL == (proj_space->select.sel_info.hslab = H5FL_CALLOC(H5S_hyper_sel_t)))
+ HGOTO_ERROR(H5E_DATASPACE, H5E_CANTALLOC, FAIL, "can't allocate hyperslab info")
- /* Update intersection sequence */
- int_sel_off += (hsize_t)proj_len;
- int_len -= proj_len;
- } /* end while */
- } /* end else */
- } /* end while */
-
-loop_end:
- /* Add remaining spans to span tree */
- for(u = proj_rank - 1; u > 0; u--)
- if(curr_span_tree[u]) {
- /* Append remaining span tree to higher dimension */
- low = curr_span_up_dim[u - 1] % proj_space->extent.size[u - 1];
- if(H5S__hyper_append_span(&curr_span_tree[u - 1], (proj_rank - u) + 1, low, low, curr_span_tree[u]) < 0)
- HGOTO_ERROR(H5E_DATASPACE, H5E_CANTAPPEND, FAIL, "can't allocate hyperslab span")
+ /* Set selection type */
+ proj_space->select.type = H5S_sel_hyper;
- /* Reset span tree */
- H5S__hyper_free_span_info(curr_span_tree[u]);
- curr_span_tree[u] = NULL;
- } /* end if */
+ /* Set unlim_dim */
+ proj_space->select.sel_info.hslab->unlim_dim = -1;
- /* Add span tree to proj_space */
- if(curr_span_tree[0]) {
- proj_space->select.sel_info.hslab->span_lst = curr_span_tree[0];
- curr_span_tree[0] = NULL;
+ /* Set span tree */
+ proj_space->select.sel_info.hslab->span_lst = udata.ps_span_info[0];
+ udata.ps_span_info[0] = NULL;
/* Set the number of elements in current selection */
proj_space->select.num_elem = H5S__hyper_spans_nelem(proj_space->select.sel_info.hslab->span_lst);
@@ -10810,36 +11189,40 @@ loop_end:
HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't convert selection")
done:
- /* Release source selection iterator */
- if(ss_iter_init && H5S_SELECT_ITER_RELEASE(ss_iter) < 0)
- HDONE_ERROR(H5E_DATASPACE, H5E_CANTRELEASE, FAIL, "unable to release selection iterator")
- if(ss_iter)
- ss_iter = H5FL_FREE(H5S_sel_iter_t, ss_iter);
-
- /* Release destination selection iterator */
- if(ds_iter_init && H5S_SELECT_ITER_RELEASE(ds_iter) < 0)
- HDONE_ERROR(H5E_DATASPACE, H5E_CANTRELEASE, FAIL, "unable to release selection iterator")
- if(ds_iter)
- ds_iter = H5FL_FREE(H5S_sel_iter_t, ds_iter);
-
- /* Release source intersect selection iterator */
- if(sis_iter_init && H5S_SELECT_ITER_RELEASE(sis_iter) < 0)
- HDONE_ERROR(H5E_DATASPACE, H5E_CANTRELEASE, FAIL, "unable to release selection iterator")
- if(sis_iter)
- sis_iter = H5FL_FREE(H5S_sel_iter_t, sis_iter);
+ /* Free ss_span_info_buf */
+ if(ss_span_info_buf) {
+ H5S__hyper_free_span_info(ss_span_info_buf);
+ ss_span_info_buf = NULL;
+ } /* end if */
+
+ /* Free ds_span_info_buf */
+ if(ds_span_info_buf) {
+ H5S__hyper_free_span_info(ds_span_info_buf);
+ ds_span_info_buf = NULL;
+ } /* end if */
/* Cleanup on error */
if(ret_value < 0) {
- /* Remove current selection from proj_space */
- if(H5S_SELECT_RELEASE(proj_space) < 0)
- HDONE_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't release selection")
+ unsigned u;
/* Free span trees */
- for(u = 0; u < proj_rank; u++)
- if(curr_span_tree[u])
- H5S__hyper_free_span_info(curr_span_tree[u]);
+ for(u = 0; u < udata.ds_rank; u++)
+ if(udata.ps_span_info[u]) {
+ H5S__hyper_free_span_info(udata.ps_span_info[u]);
+ udata.ps_span_info[u] = NULL;
+ } /* end if */
} /* end if */
+#ifndef NDEBUG
+ /* Verify there are no more span trees */
+ {
+ unsigned u;
+
+ for(u = 0; u < H5S_MAX_RANK; u++)
+ HDassert(!udata.ps_span_info[u]);
+ } /* end block */
+#endif /* NDEBUG */
+
FUNC_LEAVE_NOAPI(ret_value)
} /* end H5S__hyper_project_intersection() */
diff --git a/src/H5Sselect.c b/src/H5Sselect.c
index 80b5ea1..6983c93 100644
--- a/src/H5Sselect.c
+++ b/src/H5Sselect.c
@@ -2374,10 +2374,11 @@ H5S_select_project_intersection(const H5S_t *src_space, const H5S_t *dst_space,
if(H5S_select_copy(new_space, dst_space, FALSE) < 0)
HGOTO_ERROR(H5E_DATASPACE, H5E_CANTCOPY, FAIL, "can't copy destination space selection")
} /* end if */
- /* If any of the spaces are "none", the projection must also be "none" */
- else if((src_intersect_space->select.type->type == H5S_SEL_NONE)
- || (src_space->select.type->type == H5S_SEL_NONE)
- || (dst_space->select.type->type == H5S_SEL_NONE)) {
+ /* If any of the selections contain no elements, the projection must be
+ * "none" */
+ else if((H5S_GET_SELECT_NPOINTS(src_intersect_space) == 0)
+ || (H5S_GET_SELECT_NPOINTS(src_space) == 0)
+ || (H5S_GET_SELECT_NPOINTS(dst_space) == 0)) {
/* Change to "none" selection */
if(H5S_select_none(new_space) < 0)
HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't change selection")
@@ -2389,6 +2390,8 @@ H5S_select_project_intersection(const H5S_t *src_space, const H5S_t *dst_space,
HGOTO_ERROR(H5E_DATASPACE, H5E_UNSUPPORTED, FAIL, "point selections not currently supported")
else {
HDassert(src_intersect_space->select.type->type == H5S_SEL_HYPERSLABS);
+ HDassert(src_space->select.type->type != H5S_SEL_NONE);
+ HDassert(dst_space->select.type->type != H5S_SEL_NONE);
/* Intersecting space is hyperslab selection. Call the hyperslab
* routine to project to another hyperslab selection. */
diff --git a/test/vds.c b/test/vds.c
index c3b6181..af052a8 100644
--- a/test/vds.c
+++ b/test/vds.c
@@ -1409,7 +1409,7 @@ test_basic_io(unsigned config, hid_t fapl)
int erbuf[10][26]; /* Expected read buffer */
int fill = -1; /* Fill value */
herr_t ret; /* Generic return value */
- int i, j;
+ int i, j, u, v;
TESTING("basic virtual dataset I/O")
@@ -3498,6 +3498,724 @@ test_basic_io(unsigned config, hid_t fapl)
memspace = -1;
+ /*
+ * Test 8: For code coverage: Horizontal block virtual mappings, and file
+ * selection, grid memory selection
+ */
+ /* Clear virtual layout in DCPL */
+ if(H5Pset_layout(dcpl, H5D_VIRTUAL) < 0)
+ TEST_ERROR
+
+ /* Create memory dataspace */
+ if((memspace = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Create virtual dataspaces */
+ dims[0] = 8;
+ dims[1] = 15;
+ if((vspace[0] = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+ if((vspace[1] = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Create source dataspace */
+ dims[0] = 4;
+ if((srcspace[0] = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Select all in source space (should not be necessary, but just to be sure)
+ */
+ if(H5Sselect_all(srcspace[0]) < 0)
+ TEST_ERROR
+
+ /* Select hyperslabs in virtual spaces */
+ start[0] = 0;
+ start[1] = 0;
+ if(H5Sselect_hyperslab(vspace[0], H5S_SELECT_SET, start, NULL, dims, NULL) < 0)
+ TEST_ERROR
+ start[0] = 4;
+ if(H5Sselect_hyperslab(vspace[1], H5S_SELECT_SET, start, NULL, dims, NULL) < 0)
+ TEST_ERROR
+
+ /* Add virtual layout mappings */
+ if(H5Pset_virtual(dcpl, vspace[0], config & TEST_IO_DIFFERENT_FILE ? srcfilename_map : ".", "src_dset1", srcspace[0]) < 0)
+ TEST_ERROR
+ if(H5Pset_virtual(dcpl, vspace[1], config & TEST_IO_DIFFERENT_FILE ? srcfilename_map : ".", "src_dset2", srcspace[0]) < 0)
+ TEST_ERROR
+
+ /* Reset dims */
+ dims[0] = 10;
+ dims[1] = 26;
+
+ /* Create virtual file */
+ if((vfile = H5Fcreate(vfilename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
+ TEST_ERROR
+
+ /* Create source file if requested */
+ if(config & TEST_IO_DIFFERENT_FILE) {
+ if((srcfile[0] = H5Fcreate(srcfilename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
+ TEST_ERROR
+ }
+ else {
+ srcfile[0] = vfile;
+ if(H5Iinc_ref(srcfile[0]) < 0)
+ TEST_ERROR
+ }
+
+ /* Create source datasets */
+ if((srcdset[0] = H5Dcreate2(srcfile[0], "src_dset1", H5T_NATIVE_INT, srcspace[0], H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+ if((srcdset[1] = H5Dcreate2(srcfile[0], "src_dset2", H5T_NATIVE_INT, srcspace[0], H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+
+ /* Create virtual dataset */
+ if((vdset = H5Dcreate2(vfile, "v_dset", H5T_NATIVE_INT, vspace[0], H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+
+ /* Reset erbuf */
+ HDmemset(erbuf[0], 0, sizeof(rbuf));
+
+ /* Populate write buffer */
+ for(i = 0; i < (int)(sizeof(buf) / sizeof(buf[0])); i++)
+ for(j = 0; j < (int)(sizeof(buf[0]) / sizeof(buf[0][0])); j++)
+ buf[i][j] = (i * (int)(sizeof(buf[0]) / sizeof(buf[0][0]))) + j;
+
+ /* Select hyperslab in memory */
+ start[0] = 0;
+ start[1] = 0;
+ count[0] = 4;
+ count[1] = 15;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Write data directly to first source dataset */
+ if(H5Dwrite(srcdset[0], H5T_NATIVE_INT, memspace, H5S_ALL, H5P_DEFAULT, buf[0]) < 0)
+ TEST_ERROR
+
+ /* Update erbuf */
+ u = 0;
+ v = 0;
+ for(i = 2; i < 4; i++)
+ for(j = 0; j < 15; j++) {
+ erbuf[u][v] = buf[i][j];
+ v += 2;
+ if(v >= 24) {
+ u += 2;
+ v = 0;
+ }
+ }
+
+ /* Select hyperslab in memory */
+ start[0] = 4;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Write data directly to second source dataset */
+ if(H5Dwrite(srcdset[1], H5T_NATIVE_INT, memspace, H5S_ALL, H5P_DEFAULT, buf[0]) < 0)
+ TEST_ERROR
+
+ /* Update erbuf */
+ for(i = 4; i < 6; i++)
+ for(j = 0; j < 15; j++) {
+ erbuf[u][v] = buf[i][j];
+ v += 2;
+ if(v >= 24) {
+ u += 2;
+ v = 0;
+ }
+ }
+
+ /* Close srcdsets and srcfile if config option specified */
+ if(config & TEST_IO_CLOSE_SRC) {
+ if(H5Dclose(srcdset[0]) < 0)
+ TEST_ERROR
+ srcdset[0] = -1;
+ if(H5Dclose(srcdset[1]) < 0)
+ TEST_ERROR
+ srcdset[1] = -1;
+ if(H5Fclose(srcfile[0]) < 0)
+ TEST_ERROR
+ srcfile[0] = -1;
+ }
+
+ /* Reopen virtual dataset and file if config option specified */
+ if(config & TEST_IO_REOPEN_VIRT) {
+ if(H5Dclose(vdset) < 0)
+ TEST_ERROR
+ vdset = -1;
+ if(H5Fclose(vfile) < 0)
+ TEST_ERROR
+ vfile = -1;
+ if((vfile = H5Fopen(vfilename, H5F_ACC_RDWR, fapl)) < 0)
+ TEST_ERROR
+ if((vdset = H5Dopen2(vfile, "v_dset", H5P_DEFAULT)) < 0)
+ TEST_ERROR
+ }
+
+ /* Select hyperslab in memory */
+ start[0] = 0;
+ start[1] = 0;
+ stride[0] = 2;
+ stride[1] = 2;
+ count[0] = 5;
+ count[1] = 12;
+ block[0] = 1;
+ block[1] = 1;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, stride, count, block) < 0)
+ TEST_ERROR
+
+ /* Select hyperslab in file */
+ start[0] = 2;
+ start[1] = 0;
+ count[0] = 4;
+ count[1] = 15;
+ if(H5Sselect_hyperslab(vspace[0], H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Read data through virtual dataset */
+ HDmemset(rbuf[0], 0, sizeof(rbuf));
+ if(H5Dread(vdset, H5T_NATIVE_INT, memspace, vspace[0], H5P_DEFAULT, rbuf[0]) < 0)
+ TEST_ERROR
+
+ /* Verify read data */
+ for(i = 0; i < (int)(sizeof(buf) / sizeof(buf[0])); i++)
+ for(j = 0; j < (int)(sizeof(buf[0]) / sizeof(buf[0][0])); j++)
+ if(rbuf[i][j] != erbuf[i][j])
+ TEST_ERROR
+
+ /* Close */
+ if(!(config & TEST_IO_CLOSE_SRC)) {
+ if(H5Dclose(srcdset[0]) < 0)
+ TEST_ERROR
+ srcdset[0] = -1;
+ if(H5Dclose(srcdset[1]) < 0)
+ TEST_ERROR
+ srcdset[1] = -1;
+ if(H5Fclose(srcfile[0]) < 0)
+ TEST_ERROR
+ srcfile[0] = -1;
+ }
+ if(H5Dclose(vdset) < 0)
+ TEST_ERROR
+ vdset = -1;
+ if(H5Fclose(vfile) < 0)
+ TEST_ERROR
+ vfile = -1;
+ if(H5Sclose(srcspace[0]) < 0)
+ TEST_ERROR
+ srcspace[0] = -1;
+ if(H5Sclose(vspace[0]) < 0)
+ TEST_ERROR
+ vspace[0] = -1;
+ if(H5Sclose(vspace[1]) < 0)
+ TEST_ERROR
+ vspace[1] = -1;
+ if(H5Sclose(memspace) < 0)
+ TEST_ERROR
+ memspace = -1;
+
+
+ /*
+ * Test 9: For code coverage: Horizontal block virtual mappings, and file
+ * selection, grid memory selection, 3 mappings, 3D memory space
+ */
+ /* Clear virtual layout in DCPL */
+ if(H5Pset_layout(dcpl, H5D_VIRTUAL) < 0)
+ TEST_ERROR
+
+ /* Create memory dataspace */
+ dims[1] = 13;
+ dims[2] = 2;
+ if((memspace = H5Screate_simple(3, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Create virtual dataspaces */
+ dims[0] = 6;
+ dims[1] = 10;
+ if((vspace[0] = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+ if((vspace[1] = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+ if((vspace[2] = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Create source dataspace */
+ dims[0] = 2;
+ if((srcspace[0] = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Select all in source space (should not be necessary, but just to be sure)
+ */
+ if(H5Sselect_all(srcspace[0]) < 0)
+ TEST_ERROR
+
+ /* Select hyperslabs in virtual spaces */
+ start[0] = 0;
+ start[1] = 0;
+ if(H5Sselect_hyperslab(vspace[0], H5S_SELECT_SET, start, NULL, dims, NULL) < 0)
+ TEST_ERROR
+ start[0] = 2;
+ if(H5Sselect_hyperslab(vspace[1], H5S_SELECT_SET, start, NULL, dims, NULL) < 0)
+ TEST_ERROR
+ start[0] = 4;
+ if(H5Sselect_hyperslab(vspace[2], H5S_SELECT_SET, start, NULL, dims, NULL) < 0)
+ TEST_ERROR
+
+ /* Add virtual layout mappings */
+ if(H5Pset_virtual(dcpl, vspace[0], config & TEST_IO_DIFFERENT_FILE ? srcfilename_map : ".", "src_dset1", srcspace[0]) < 0)
+ TEST_ERROR
+ if(H5Pset_virtual(dcpl, vspace[1], config & TEST_IO_DIFFERENT_FILE ? srcfilename_map : ".", "src_dset2", srcspace[0]) < 0)
+ TEST_ERROR
+ if(H5Pset_virtual(dcpl, vspace[2], config & TEST_IO_DIFFERENT_FILE ? srcfilename_map : ".", "src_dset3", srcspace[0]) < 0)
+ TEST_ERROR
+
+ /* Reset dims */
+ dims[0] = 10;
+ dims[1] = 26;
+
+ /* Create virtual file */
+ if((vfile = H5Fcreate(vfilename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
+ TEST_ERROR
+
+ /* Create source file if requested */
+ if(config & TEST_IO_DIFFERENT_FILE) {
+ if((srcfile[0] = H5Fcreate(srcfilename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
+ TEST_ERROR
+ }
+ else {
+ srcfile[0] = vfile;
+ if(H5Iinc_ref(srcfile[0]) < 0)
+ TEST_ERROR
+ }
+
+ /* Create source datasets */
+ if((srcdset[0] = H5Dcreate2(srcfile[0], "src_dset1", H5T_NATIVE_INT, srcspace[0], H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+ if((srcdset[1] = H5Dcreate2(srcfile[0], "src_dset2", H5T_NATIVE_INT, srcspace[0], H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+ if((srcdset[2] = H5Dcreate2(srcfile[0], "src_dset3", H5T_NATIVE_INT, srcspace[0], H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+
+ /* Create virtual dataset */
+ if((vdset = H5Dcreate2(vfile, "v_dset", H5T_NATIVE_INT, vspace[0], H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+
+ /* Reset erbuf */
+ HDmemset(erbuf[0], 0, sizeof(rbuf));
+
+ /* Populate write buffer */
+ for(i = 0; i < (int)(sizeof(buf) / sizeof(buf[0])); i++)
+ for(j = 0; j < (int)(sizeof(buf[0]) / sizeof(buf[0][0])); j++)
+ buf[i][j] = (i * (int)(sizeof(buf[0]) / sizeof(buf[0][0]))) + j;
+
+ /* Select hyperslab in memory */
+ start[0] = 0;
+ start[1] = 0;
+ start[2] = 0;
+ count[0] = 2;
+ count[1] = 5;
+ count[2] = 2;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Write data directly to first source dataset */
+ if(H5Dwrite(srcdset[0], H5T_NATIVE_INT, memspace, H5S_ALL, H5P_DEFAULT, buf[0]) < 0)
+ TEST_ERROR
+
+ /* Update erbuf */
+ u = 0;
+ v = 0;
+ for(i = 0; i < 2; i++)
+ for(j = 0; j < 10; j++) {
+ erbuf[u][v] = buf[i][j];
+ if(++v == 6)
+ v += 2;
+ else if(v == 14) {
+ u += 2;
+ v = 0;
+ }
+ }
+
+ /* Select hyperslab in memory */
+ start[0] = 2;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Write data directly to second source dataset */
+ if(H5Dwrite(srcdset[1], H5T_NATIVE_INT, memspace, H5S_ALL, H5P_DEFAULT, buf[0]) < 0)
+ TEST_ERROR
+
+ /* Update erbuf */
+ for(i = 2; i < 4; i++)
+ for(j = 0; j < 10; j++) {
+ erbuf[u][v] = buf[i][j];
+ if(++v == 6)
+ v += 2;
+ else if(v == 14) {
+ u += 2;
+ v = 0;
+ }
+ }
+
+ /* Select hyperslab in memory */
+ start[0] = 4;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Write data directly to third source dataset */
+ if(H5Dwrite(srcdset[2], H5T_NATIVE_INT, memspace, H5S_ALL, H5P_DEFAULT, buf[0]) < 0)
+ TEST_ERROR
+
+ /* Update erbuf */
+ for(i = 4; i < 6; i++)
+ for(j = 0; j < 10; j++) {
+ erbuf[u][v] = buf[i][j];
+ if(++v == 6)
+ v += 2;
+ else if(v == 14) {
+ u += 2;
+ v = 0;
+ }
+ }
+
+ /* Close srcdsets and srcfile if config option specified */
+ if(config & TEST_IO_CLOSE_SRC) {
+ if(H5Dclose(srcdset[0]) < 0)
+ TEST_ERROR
+ srcdset[0] = -1;
+ if(H5Dclose(srcdset[1]) < 0)
+ TEST_ERROR
+ srcdset[1] = -1;
+ if(H5Dclose(srcdset[2]) < 0)
+ TEST_ERROR
+ srcdset[2] = -1;
+ if(H5Fclose(srcfile[0]) < 0)
+ TEST_ERROR
+ srcfile[0] = -1;
+ }
+
+ /* Reopen virtual dataset and file if config option specified */
+ if(config & TEST_IO_REOPEN_VIRT) {
+ if(H5Dclose(vdset) < 0)
+ TEST_ERROR
+ vdset = -1;
+ if(H5Fclose(vfile) < 0)
+ TEST_ERROR
+ vfile = -1;
+ if((vfile = H5Fopen(vfilename, H5F_ACC_RDWR, fapl)) < 0)
+ TEST_ERROR
+ if((vdset = H5Dopen2(vfile, "v_dset", H5P_DEFAULT)) < 0)
+ TEST_ERROR
+ }
+
+ /* Select hyperslab in memory */
+ start[0] = 0;
+ start[1] = 0;
+ start[2] = 0;
+ stride[0] = 2;
+ stride[1] = 4;
+ stride[2] = 1;
+ count[0] = 5;
+ count[1] = 2;
+ count[2] = 1;
+ block[0] = 1;
+ block[1] = 3;
+ block[2] = 2;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, stride, count, block) < 0)
+ TEST_ERROR
+
+ /* Read data through virtual dataset */
+ HDmemset(rbuf[0], 0, sizeof(rbuf));
+ if(H5Dread(vdset, H5T_NATIVE_INT, memspace, H5S_ALL, H5P_DEFAULT, rbuf[0]) < 0)
+ TEST_ERROR
+
+ /* Verify read data */
+ for(i = 0; i < (int)(sizeof(buf) / sizeof(buf[0])); i++)
+ for(j = 0; j < (int)(sizeof(buf[0]) / sizeof(buf[0][0])); j++)
+ if(rbuf[i][j] != erbuf[i][j])
+ TEST_ERROR
+
+ /* Close */
+ if(!(config & TEST_IO_CLOSE_SRC)) {
+ if(H5Dclose(srcdset[0]) < 0)
+ TEST_ERROR
+ srcdset[0] = -1;
+ if(H5Dclose(srcdset[1]) < 0)
+ TEST_ERROR
+ srcdset[1] = -1;
+ if(H5Dclose(srcdset[2]) < 0)
+ TEST_ERROR
+ srcdset[2] = -1;
+ if(H5Fclose(srcfile[0]) < 0)
+ TEST_ERROR
+ srcfile[0] = -1;
+ }
+ if(H5Dclose(vdset) < 0)
+ TEST_ERROR
+ vdset = -1;
+ if(H5Fclose(vfile) < 0)
+ TEST_ERROR
+ vfile = -1;
+ if(H5Sclose(srcspace[0]) < 0)
+ TEST_ERROR
+ srcspace[0] = -1;
+ if(H5Sclose(vspace[0]) < 0)
+ TEST_ERROR
+ vspace[0] = -1;
+ if(H5Sclose(vspace[1]) < 0)
+ TEST_ERROR
+ vspace[1] = -1;
+ if(H5Sclose(vspace[2]) < 0)
+ TEST_ERROR
+ vspace[2] = -1;
+ if(H5Sclose(memspace) < 0)
+ TEST_ERROR
+ memspace = -1;
+
+
+ /*
+ * Test 10: For code coverage: Vertical stripe virtual mappings, vertical
+ * block file selection, block memory selection, 3D VDS
+ */
+ /* Clear virtual layout in DCPL */
+ if(H5Pset_layout(dcpl, H5D_VIRTUAL) < 0)
+ TEST_ERROR
+
+ /* Create memory dataspace */
+ if((memspace = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Create virtual dataspaces */
+ dims[0] = 10;
+ dims[1] = 9;
+ dims[2] = 6;
+ if((vspace[0] = H5Screate_simple(3, dims, NULL)) < 0)
+ TEST_ERROR
+ if((vspace[1] = H5Screate_simple(3, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Create source dataspace */
+ dims[1] = 12;
+ if((srcspace[0] = H5Screate_simple(2, dims, NULL)) < 0)
+ TEST_ERROR
+
+ /* Select all in source space (should not be necessary, but just to be sure)
+ */
+ if(H5Sselect_all(srcspace[0]) < 0)
+ TEST_ERROR
+
+ /* Select hyperslabs in virtual spaces */
+ start[0] = 0;
+ start[1] = 0;
+ start[2] = 0;
+ count[0] = 1;
+ count[1] = 4;
+ count[2] = 3;
+ stride[0] = 1;
+ stride[1] = 2;
+ stride[2] = 2;
+ block[0] = 10;
+ block[1] = 1;
+ block[2] = 1;
+ if(H5Sselect_hyperslab(vspace[0], H5S_SELECT_SET, start, stride, count, block) < 0)
+ TEST_ERROR
+ start[2] = 1;
+ if(H5Sselect_hyperslab(vspace[1], H5S_SELECT_SET, start, stride, count, block) < 0)
+ TEST_ERROR
+
+ /* Add virtual layout mappings */
+ if(H5Pset_virtual(dcpl, vspace[0], config & TEST_IO_DIFFERENT_FILE ? srcfilename_map : ".", "src_dset1", srcspace[0]) < 0)
+ TEST_ERROR
+ if(H5Pset_virtual(dcpl, vspace[1], config & TEST_IO_DIFFERENT_FILE ? srcfilename_map : ".", "src_dset2", srcspace[0]) < 0)
+ TEST_ERROR
+
+ /* Reset dims */
+ dims[0] = 10;
+ dims[1] = 26;
+
+ /* Create virtual file */
+ if((vfile = H5Fcreate(vfilename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
+ TEST_ERROR
+
+ /* Create source file if requested */
+ if(config & TEST_IO_DIFFERENT_FILE) {
+ if((srcfile[0] = H5Fcreate(srcfilename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
+ TEST_ERROR
+ }
+ else {
+ srcfile[0] = vfile;
+ if(H5Iinc_ref(srcfile[0]) < 0)
+ TEST_ERROR
+ }
+
+ /* Create source datasets */
+ if((srcdset[0] = H5Dcreate2(srcfile[0], "src_dset1", H5T_NATIVE_INT, srcspace[0], H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+ if((srcdset[1] = H5Dcreate2(srcfile[0], "src_dset2", H5T_NATIVE_INT, srcspace[0], H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+
+ /* Create virtual dataset */
+ if((vdset = H5Dcreate2(vfile, "v_dset", H5T_NATIVE_INT, vspace[0], H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0)
+ TEST_ERROR
+
+ /* Initialize erbuf */
+ HDmemset(erbuf[0], 0, sizeof(rbuf));
+ for(i = 0; i < 10; i++)
+ for(j = 0; j < 24; j += 6) {
+ erbuf[i][j] = -1;
+ erbuf[i][j + 1] = -1;
+ }
+
+ /* Populate write buffer */
+ for(i = 0; i < (int)(sizeof(buf) / sizeof(buf[0])); i++)
+ for(j = 0; j < (int)(sizeof(buf[0]) / sizeof(buf[0][0])); j++)
+ buf[i][j] = (i * (int)(sizeof(buf[0]) / sizeof(buf[0][0]))) + j;
+
+ /* Select hyperslab in memory */
+ start[0] = 0;
+ start[1] = 0;
+ count[0] = 10;
+ count[1] = 12;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Write data directly to first source dataset */
+ if(H5Dwrite(srcdset[0], H5T_NATIVE_INT, memspace, H5S_ALL, H5P_DEFAULT, buf[0]) < 0)
+ TEST_ERROR
+
+ /* Update erbuf */
+ u = 0;
+ v = 0;
+ for(i = 0; i < 10; i++)
+ for(j = 0; j < 8; j++) {
+ if(v == 0 || v == 12)
+ erbuf[u][v] = buf[i][j];
+ v += 2;
+ if(!(v % 6))
+ v += 6;
+ if(v >= 28) {
+ u++;
+ v = 0;
+ }
+ }
+
+ /* Select hyperslab in memory */
+ start[1] = 8;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Write data directly to second source dataset */
+ if(H5Dwrite(srcdset[1], H5T_NATIVE_INT, memspace, H5S_ALL, H5P_DEFAULT, buf[0]) < 0)
+ TEST_ERROR
+
+ /* Update erbuf */
+ u = 0;
+ v = 1;
+ for(i = 0; i < 10; i++)
+ for(j = 8; j < 16; j++) {
+ if(v == 1 || v == 13)
+ erbuf[u][v] = buf[i][j];
+ v += 2;
+ if(!((v - 1) % 6))
+ v += 6;
+ if(v >= 28) {
+ u++;
+ v = 1;
+ }
+ }
+
+ /* Close srcdsets and srcfile if config option specified */
+ if(config & TEST_IO_CLOSE_SRC) {
+ if(H5Dclose(srcdset[0]) < 0)
+ TEST_ERROR
+ srcdset[0] = -1;
+ if(H5Dclose(srcdset[1]) < 0)
+ TEST_ERROR
+ srcdset[1] = -1;
+ if(H5Fclose(srcfile[0]) < 0)
+ TEST_ERROR
+ srcfile[0] = -1;
+ }
+
+ /* Reopen virtual dataset and file if config option specified */
+ if(config & TEST_IO_REOPEN_VIRT) {
+ if(H5Dclose(vdset) < 0)
+ TEST_ERROR
+ vdset = -1;
+ if(H5Fclose(vfile) < 0)
+ TEST_ERROR
+ vfile = -1;
+ if((vfile = H5Fopen(vfilename, H5F_ACC_RDWR, fapl)) < 0)
+ TEST_ERROR
+ if((vdset = H5Dopen2(vfile, "v_dset", H5P_DEFAULT)) < 0)
+ TEST_ERROR
+ }
+
+ /* Select hyperslab in memory */
+ start[0] = 0;
+ start[1] = 0;
+ stride[0] = 1;
+ stride[1] = 6;
+ count[0] = 1;
+ count[1] = 4;
+ block[0] = 10;
+ block[1] = 2;
+ if(H5Sselect_hyperslab(memspace, H5S_SELECT_SET, start, stride, count, block) < 0)
+ TEST_ERROR
+
+ /* Select hyperslab in file */
+ start[0] = 0;
+ start[1] = 0;
+ start[2] = 0;
+ count[0] = 10;
+ count[1] = 4;
+ count[2] = 2;
+ if(H5Sselect_hyperslab(vspace[0], H5S_SELECT_SET, start, NULL, count, NULL) < 0)
+ TEST_ERROR
+
+ /* Read data through virtual dataset */
+ HDmemset(rbuf[0], 0, sizeof(rbuf));
+ if(H5Dread(vdset, H5T_NATIVE_INT, memspace, vspace[0], H5P_DEFAULT, rbuf[0]) < 0)
+ TEST_ERROR
+
+ /* Verify read data */
+ for(i = 0; i < (int)(sizeof(buf) / sizeof(buf[0])); i++)
+ for(j = 0; j < (int)(sizeof(buf[0]) / sizeof(buf[0][0])); j++)
+ if(rbuf[i][j] != erbuf[i][j])
+ TEST_ERROR
+
+ /* Close */
+ if(!(config & TEST_IO_CLOSE_SRC)) {
+ if(H5Dclose(srcdset[0]) < 0)
+ TEST_ERROR
+ srcdset[0] = -1;
+ if(H5Dclose(srcdset[1]) < 0)
+ TEST_ERROR
+ srcdset[1] = -1;
+ if(H5Fclose(srcfile[0]) < 0)
+ TEST_ERROR
+ srcfile[0] = -1;
+ }
+ if(H5Dclose(vdset) < 0)
+ TEST_ERROR
+ vdset = -1;
+ if(H5Fclose(vfile) < 0)
+ TEST_ERROR
+ vfile = -1;
+ if(H5Sclose(srcspace[0]) < 0)
+ TEST_ERROR
+ srcspace[0] = -1;
+ if(H5Sclose(vspace[0]) < 0)
+ TEST_ERROR
+ vspace[0] = -1;
+ if(H5Sclose(vspace[1]) < 0)
+ TEST_ERROR
+ vspace[1] = -1;
+ if(H5Sclose(memspace) < 0)
+ TEST_ERROR
+ memspace = -1;
+
+
/* Close */
if(H5Pclose(dcpl) < 0)
TEST_ERROR