diff options
| -rw-r--r-- | src/H5Ppublic.h | 308 |
1 files changed, 288 insertions, 20 deletions
diff --git a/src/H5Ppublic.h b/src/H5Ppublic.h index d822925..d79c7d7 100644 --- a/src/H5Ppublic.h +++ b/src/H5Ppublic.h @@ -4837,9 +4837,8 @@ H5_DLL herr_t H5Pset_gc_references(hid_t fapl_id, unsigned gc_ref); * enumerated value in #H5F_libver_t, indicating that this is * currently the latest format available. * - * The library supports the following five pairs of - * (\p low, \p high) combinations as derived from the values - * in #H5F_libver_t: + * The library supports the following pairs of (\p low, \p high) + * combinations as derived from the values in #H5F_libver_t: * * <table> * <tr> @@ -4866,11 +4865,53 @@ H5_DLL herr_t H5Pset_gc_references(hid_t fapl_id, unsigned gc_ref); * \li The library will create objects with the earliest possible * format versions. * \li The library will allow objects to be created with the latest - * format versions available to library release 1.10.x. - * Since 1.10.x is also #H5F_LIBVER_LATEST, there is no upper - * limit on the format versions to use. For example, if a newer - * format version is required to support a feature e.g. virtual - * dataset, this setting will allow the object to be created. + * format versions available to library release 1.10.x. Note + * that as 1.10.11 is the last release of the 1.10 series. + * \li API calls that create objects or features that are + * available to versions of the library greater than 1.10.x + * release will fail. + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_EARLIEST<br /> + * \p high=#H5F_LIBVER_V112</td> + * <td> + * \li The library will create objects with the earliest possible + * format versions. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.12.x. Note + * that as 1.12.3 is the last release of the 1.12 series. + * \li API calls that create objects or features that are + * available to versions of the library greater than 1.12.x + * release will fail. + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_EARLIEST<br /> + * \p high=#H5F_LIBVER_V114</td> + * <td> + * \li The library will create objects with the earliest possible + * format versions. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.14.x. + * \li API calls that create objects or features that are + * available to versions of the library greater than 1.14.x + * release will fail. + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_EARLIEST<br /> + * \p high=#H5F_LIBVER_V116</td> + * <td> + * \li The library will create objects with the earliest possible + * format versions. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.16.x. + * Since 1.16.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. That is, if a + * newer format version is required to support a feature + * in 1.16.x series, this setting will allow the object to be + * created. * \li This is the library default setting and provides the greatest * format compatibility. * </td> @@ -4894,11 +4935,54 @@ H5_DLL herr_t H5Pset_gc_references(hid_t fapl_id, unsigned gc_ref); * \li The library will create objects with the latest format * versions available to library release 1.8.x. * \li The library will allow objects to be created with the latest - * format versions available to library release 1.10.x. - * Since 1.10.x is also #H5F_LIBVER_LATEST, there is no upper - * limit on the format versions to use. For example, if a - * newer format version is required to support a feature e.g. - * virtual dataset, this setting will allow the object to be + * format versions available to library release 1.10.x. Note + * that 1.10.11 is the last release of the 1.10 series. + * \li API calls that create objects or features that are + * available to versions of the library greater than 1.10.x + * release will fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V18<br /> + * \p high=#H5F_LIBVER_V112</td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.8.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.12.x. + * \li API calls that create objects or features that are + * available to versions of the library greater than 1.12.x + * release will fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V18<br /> + * \p high=#H5F_LIBVER_V114</td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.8.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.14.x. + * \li API calls that create objects or features that are + * available to versions of the library greater than 1.14.x + * release will fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V18<br /> + * \p high=#H5F_LIBVER_V116</td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.8.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.16.x. + * Since 1.16.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. That is, if a + * newer format version is required to support a feature + * in 1.16.x series, this setting will allow the object to be * created. * \li Earlier versions of the library may not be able to access * objects created with this setting.</td> @@ -4911,11 +4995,196 @@ H5_DLL herr_t H5Pset_gc_references(hid_t fapl_id, unsigned gc_ref); * \li The library will create objects with the latest format * versions available to library release 1.10.x. * \li The library will allow objects to be created with the latest - * format versions available to library release 1.10.x. - * Since 1.10.x is also #H5F_LIBVER_LATEST, there is no upper - * limit on the format versions to use. For example, if a - * newer format version is required to support a feature e.g. - * virtual dataset, this setting will allow the object to be + * format versions available to library release 1.10.x. Note + * that 1.10.11 is the last release of the 1.10 series. + * \li The objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li API calls that create objects or features that are available + * to versions of the library greater than 1.10.x release will + * fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V110<br /> + * \p high=#H5F_LIBVER_V112 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.10.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.12.x. + * \li The objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li API calls that create objects or features that are available + * to versions of the library greater than 1.12.x release will + * fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V110<br /> + * \p high=#H5F_LIBVER_V114 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.10.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.14.x. + * \li The objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li API calls that create objects or features that are available + * to versions of the library greater than 1.14.x release will + * fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V110<br /> + * \p high=#H5F_LIBVER_V116 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.10.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.16.x. + * Since 1.16.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. That is, if a + * newer format version is required to support a feature + * in 1.16.x series, this setting will allow the object to be + * created. + * \li This setting allows users to take advantage of the latest + * features and performance enhancements in the library. + * However, objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li Earlier versions of the library may not be able to access + * objects created with this setting. + * </td> + * <tr> + * <td>\p low=#H5F_LIBVER_V112<br /> + * \p high=#H5F_LIBVER_V112 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.12.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.12.x. + * \li The objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li API calls that create objects or features that are available + * to versions of the library greater than 1.12.x release will + * fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V112<br /> + * \p high=#H5F_LIBVER_V114 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.12.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.14.x. + * \li The objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li API calls that create objects or features that are available + * to versions of the library greater than 1.14.x release will + * fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </td> + * </tr> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V112<br /> + * \p high=#H5F_LIBVER_V116 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.12.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.16.x. + * Since 1.16.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. That is, if a + * newer format version is required to support a feature + * in 1.16.x series, this setting will allow the object to be + * created. + * \li This setting allows users to take advantage of the latest + * features and performance enhancements in the library. + * However, objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li Earlier versions of the library may not be able to access + * objects created with this setting. + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V114<br /> + * \p high=#H5F_LIBVER_V114 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.14.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.14.x. + * \li The objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li API calls that create objects or features that are available + * to versions of the library greater than 1.14.x release will + * fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </td> + * </tr> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V114<br /> + * \p high=#H5F_LIBVER_V116 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.14.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.16.x. + * Since 1.16.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. That is, if a + * newer format version is required to support a feature + * in 1.16.x series, this setting will allow the object to be + * created. + * \li This setting allows users to take advantage of the latest + * features and performance enhancements in the library. + * However, objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li Earlier versions of the library may not be able to access + * objects created with this setting. + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V116<br /> + * \p high=#H5F_LIBVER_V116 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.16.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.16.x. + * Since 1.16.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. That is, if a + * newer format version is required to support a feature + * in 1.16.x series, this setting will allow the object to be * created. * \li This setting allows users to take advantage of the latest * features and performance enhancements in the library. @@ -4923,8 +5192,7 @@ H5_DLL herr_t H5Pset_gc_references(hid_t fapl_id, unsigned gc_ref); * accessible to a smaller range of library versions than * would be the case if low is set to #H5F_LIBVER_EARLIEST. * \li Earlier versions of the library may not be able to access - * objects created with this - * setting. + * objects created with this setting. * </td> * </tr> * </table> |