diff options
| -rw-r--r-- | config/cmake/jrunTest.cmake | 46 | ||||
| -rwxr-xr-x | config/cmake/scripts/HDF5config.cmake | 2 | ||||
| -rw-r--r-- | config/cmake/vfdTest.cmake | 2 | ||||
| -rw-r--r-- | config/cmake_ext_mod/grepTest.cmake | 8 | ||||
| -rw-r--r-- | config/cmake_ext_mod/runTest.cmake | 44 | ||||
| -rw-r--r-- | release_docs/RELEASE.txt | 6 | ||||
| -rw-r--r-- | tools/test/misc/CMakeTestsRepart.cmake | 25 |
7 files changed, 73 insertions, 60 deletions
diff --git a/config/cmake/jrunTest.cmake b/config/cmake/jrunTest.cmake index 43aef22..23f297c 100644 --- a/config/cmake/jrunTest.cmake +++ b/config/cmake/jrunTest.cmake @@ -77,10 +77,10 @@ if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}.err) endif () if (NOT ERROR_APPEND) - # append error output to the stdout output file + # write back to original .err file file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") else () - # write back to original .err file + # append error output to the stdout output file file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") endif () endif () @@ -110,8 +110,8 @@ if (TEST_MASK_ERROR) endif () endif () -# if the return value is !=0 bail out -if (NOT "${TEST_RESULT}" STREQUAL "${TEST_EXPECT}") +# if the return value is !=expected bail out +if (NOT TEST_RESULT EQUAL TEST_EXPECT) message (STATUS "ERROR OUTPUT: ${TEST_STREAM}") message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != 0.\n${TEST_ERROR}") endif () @@ -131,33 +131,33 @@ if (NOT TEST_SKIP_COMPARE) COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} RESULT_VARIABLE TEST_RESULT ) - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) set (TEST_RESULT 0) file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) list (LENGTH test_act len_act) file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) list (LENGTH test_ref len_ref) - if (NOT "${len_act}" STREQUAL "0" AND NOT "${len_ref}" STREQUAL "0") + if (len_act GREATER 0 AND len_ref GREATER 0) math (EXPR _FP_LEN "${len_ref} - 1") foreach (line RANGE 0 ${_FP_LEN}) list (GET test_act ${line} str_act) list (GET test_ref ${line} str_ref) - if (NOT "${str_act}" STREQUAL "${str_ref}") - if (NOT "${str_act}" STREQUAL "") + if (NOT ${str_act} STREQUAL ${str_ref}) + if (NOT str_act STREQUAL "") set (TEST_RESULT 1) message ("line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") endif () endif () endforeach () else () - if ("${len_act}" STREQUAL "0") + if (len_act EQUAL 0) message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") endif () - if ("${len_ref}" STREQUAL "0") + if (len_ref EQUAL 0) message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") endif () endif () - if (NOT "${len_act}" STREQUAL "${len_ref}") + if (NOT len_act EQUAL len_ref) set (TEST_RESULT 1) endif () endif () @@ -165,7 +165,7 @@ if (NOT TEST_SKIP_COMPARE) message (STATUS "COMPARE Result: ${TEST_RESULT}") # again, if return value is !=0 scream and shout - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") endif () endif () @@ -182,34 +182,34 @@ if (NOT TEST_SKIP_COMPARE) COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} RESULT_VARIABLE TEST_RESULT ) - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) set (TEST_RESULT 0) file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) list (LENGTH test_act len_act) file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) list (LENGTH test_ref len_ref) math (EXPR _FP_LEN "${len_ref} - 1") - if (NOT "${len_act}" STREQUAL "0" AND NOT "${len_ref}" STREQUAL "0") + if (len_act GREATER 0 AND len_ref GREATER 0) math (EXPR _FP_LEN "${len_ref} - 1") foreach (line RANGE 0 ${_FP_LEN}) list (GET test_act ${line} str_act) list (GET test_ref ${line} str_ref) - if (NOT "${str_act}" STREQUAL "${str_ref}") - if (NOT "${str_act}" STREQUAL "") + if (NOT ${str_act} STREQUAL ${str_ref}) + if (NOT ${str_act} STREQUAL "") set (TEST_RESULT 1) message ("line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") endif () endif () endforeach () else () - if ("${len_act}" STREQUAL "0") + if (len_act EQUAL 0) message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") endif () - if ("${len_ref}" STREQUAL "0") + if (len_ref EQUAL 0) message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") endif () endif () - if (NOT "${len_act}" STREQUAL "${len_ref}") + if (NOT len_act EQUAL len_ref) set (TEST_RESULT 1) endif () endif () @@ -217,7 +217,7 @@ if (NOT TEST_SKIP_COMPARE) message (STATUS "COMPARE Result: ${TEST_RESULT}") # again, if return value is !=0 scream and shout - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") endif () endif () @@ -230,15 +230,15 @@ if (TEST_GREP_COMPARE) # TEST_REFERENCE should always be matched string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) - if ("${TEST_RESULT}" STREQUAL "0") + if (NOT TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") endif () string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) - if ("${TEST_EXPECT}" STREQUAL "1") + if (TEST_EXPECT) # TEST_EXPECT (1) interperts TEST_FILTER as NOT to match string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") endif () endif () diff --git a/config/cmake/scripts/HDF5config.cmake b/config/cmake/scripts/HDF5config.cmake index f9b6401..f8e6f9b 100755 --- a/config/cmake/scripts/HDF5config.cmake +++ b/config/cmake/scripts/HDF5config.cmake @@ -184,7 +184,7 @@ set (MODEL "Experimental") ##### Following controls source update ##### #set (LOCAL_UPDATE "TRUE") set (REPOSITORY_URL "https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5.git") -set (REPOSITORY_BRANCH "hdf5_1_10_4") +set (REPOSITORY_BRANCH "hdf5_1_10_5") #uncomment to use a compressed source file: *.tar on linux or mac *.zip on windows #set(CTEST_USE_TAR_SOURCE "${CTEST_SOURCE_VERSION}") diff --git a/config/cmake/vfdTest.cmake b/config/cmake/vfdTest.cmake index 95a4c40..b616958 100644 --- a/config/cmake/vfdTest.cmake +++ b/config/cmake/vfdTest.cmake @@ -60,7 +60,7 @@ if (ERROR_APPEND AND EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.err) endif () # if the return value is !=${TEST_EXPECT} bail out -if (NOT "${TEST_RESULT}" STREQUAL "${TEST_EXPECT}") +if (NOT TEST_RESULT EQUAL TEST_EXPECT) if (NOT TEST_NOERRDISPLAY) if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out) file (READ ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out TEST_STREAM) diff --git a/config/cmake_ext_mod/grepTest.cmake b/config/cmake_ext_mod/grepTest.cmake index b812d73..1417204 100644 --- a/config/cmake_ext_mod/grepTest.cmake +++ b/config/cmake_ext_mod/grepTest.cmake @@ -57,15 +57,15 @@ file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) # TEST_REFERENCE should always be matched string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) -if ("${TEST_RESULT}" STREQUAL "0") +if (NOT TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") endif () string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) -if ("${TEST_EXPECT}" STREQUAL "1") - # TEST_EXPECT (1) interperts TEST_FILTER as NOT to match +if (TEST_EXPECT) + # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") endif () endif () diff --git a/config/cmake_ext_mod/runTest.cmake b/config/cmake_ext_mod/runTest.cmake index 4ac1dc8..e11852a 100644 --- a/config/cmake_ext_mod/runTest.cmake +++ b/config/cmake_ext_mod/runTest.cmake @@ -80,7 +80,7 @@ if (TEST_REGEX) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) string (REGEX MATCH "${TEST_REGEX}" REGEX_MATCH ${TEST_STREAM}) string (COMPARE EQUAL "${REGEX_MATCH}" "${TEST_MATCH}" REGEX_RESULT) - if ("${REGEX_RESULT}" STREQUAL "0") + if (NOT REGEX_RESULT) message (STATUS "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_MATCH}") endif () endif () @@ -111,7 +111,7 @@ if (TEST_APPEND) endif () # if the return value is !=${TEST_EXPECT} bail out -if (NOT "${TEST_RESULT}" STREQUAL "${TEST_EXPECT}") +if (NOT TEST_RESULT EQUAL TEST_EXPECT) if (NOT TEST_NOERRDISPLAY) if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) @@ -126,7 +126,7 @@ message (STATUS "COMMAND Error: ${TEST_ERROR}") # remove special output file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) string (FIND TEST_STREAM "_pmi_alps" "${TEST_FIND_RESULT}") -if (NOT ${TEST_FIND_RESULT} STREQUAL "0") +if (TEST_FIND_RESULT GREATER 0) string (REGEX REPLACE "^.*_pmi_alps[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}") file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_STREAM}) endif () @@ -207,33 +207,33 @@ if (NOT TEST_SKIP_COMPARE) endif () endif () - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) set (TEST_RESULT 0) file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) list (LENGTH test_act len_act) file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) list (LENGTH test_ref len_ref) - if (NOT "${len_act}" STREQUAL "0" AND NOT "${len_ref}" STREQUAL "0") + if (len_act GREATER 0 AND len_ref GREATER 0) math (EXPR _FP_LEN "${len_ref} - 1") foreach (line RANGE 0 ${_FP_LEN}) list (GET test_act ${line} str_act) list (GET test_ref ${line} str_ref) - if (NOT "${str_act}" STREQUAL "${str_ref}") - if (NOT "${str_act}" STREQUAL "") + if (NOT ${str_act} STREQUAL ${str_ref}) + if (NOT str_act STREQUAL "") set (TEST_RESULT 1) message ("line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") endif () endif () endforeach () else () - if ("${len_act}" STREQUAL "0") + if (len_act EQUAL 0) message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") endif () - if ("${len_ref}" STREQUAL "0") + if (len_ref EQUAL 0) message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") endif () endif () - if (NOT "${len_act}" STREQUAL "${len_ref}") + if (NOT len_act EQUAL len_ref) set (TEST_RESULT 1) endif () endif () @@ -241,7 +241,7 @@ if (NOT TEST_SKIP_COMPARE) message (STATUS "COMPARE Result: ${TEST_RESULT}") # again, if return value is !=0 scream and shout - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") endif () endif () @@ -258,34 +258,34 @@ if (NOT TEST_SKIP_COMPARE) COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} RESULT_VARIABLE TEST_RESULT ) - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) set (TEST_RESULT 0) file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) list (LENGTH test_act len_act) file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) list (LENGTH test_ref len_ref) math (EXPR _FP_LEN "${len_ref} - 1") - if (NOT "${len_act}" STREQUAL "0" AND NOT "${len_ref}" STREQUAL "0") + if (len_act GREATER 0 AND len_ref GREATER 0) math (EXPR _FP_LEN "${len_ref} - 1") foreach (line RANGE 0 ${_FP_LEN}) list (GET test_act ${line} str_act) list (GET test_ref ${line} str_ref) - if (NOT "${str_act}" STREQUAL "${str_ref}") - if (NOT "${str_act}" STREQUAL "") + if (NOT ${str_act} STREQUAL ${str_ref}) + if (NOT ${str_act} STREQUAL "") set (TEST_RESULT 1) message ("line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") endif () endif () endforeach () else () - if ("${len_act}" STREQUAL "0") + if (len_act EQUAL 0) message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") endif () - if ("${len_ref}" STREQUAL "0") + if (len_ref EQUAL 0) message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") endif () endif () - if (NOT "${len_act}" STREQUAL "${len_ref}") + if (NOT len_act EQUAL len_ref) set (TEST_RESULT 1) endif () endif () @@ -293,7 +293,7 @@ if (NOT TEST_SKIP_COMPARE) message (STATUS "COMPARE Result: ${TEST_RESULT}") # again, if return value is !=0 scream and shout - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") endif () endif () @@ -306,15 +306,15 @@ if (TEST_GREP_COMPARE) # TEST_REFERENCE should always be matched string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) - if ("${TEST_RESULT}" STREQUAL "0") + if (NOT TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") endif () string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) - if ("${TEST_EXPECT}" STREQUAL "1") + if (TEST_EXPECT) # TEST_EXPECT (1) interperts TEST_FILTER as NOT to match string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (NOT "${TEST_RESULT}" STREQUAL "0") + if (TEST_RESULT) message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") endif () endif () diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt index 836d1a1..e4a39c9 100644 --- a/release_docs/RELEASE.txt +++ b/release_docs/RELEASE.txt @@ -47,6 +47,12 @@ New Features Configuration: ------------- + - Rework CMake command files to eliminate developer CMP005 warning + + Use variables without quotes in if () statements. + + (ADB - 2019/01/18, TILABS-105) + - Rework CMake configure files to eliminate developer CMP0075 warning Renamed varname to HDF5_REQUIRED_LIBRARIES as the contents were not diff --git a/tools/test/misc/CMakeTestsRepart.cmake b/tools/test/misc/CMakeTestsRepart.cmake index 830de11..8edd243 100644 --- a/tools/test/misc/CMakeTestsRepart.cmake +++ b/tools/test/misc/CMakeTestsRepart.cmake @@ -71,30 +71,37 @@ family_to_single.h5 family_to_sec2.h5 ) - if (NOT "${last_test}" STREQUAL "") - set_tests_properties (H5REPART-clearall-objects PROPERTIES DEPENDS ${last_test}) - endif () - set (last_test "H5REPART-clearall-objects") + set_tests_properties (H5REPART-clearall-objects PROPERTIES FIXTURES_SETUP clear_testrepart) # repartition family member size to 20,000 bytes. add_test (NAME H5REPART-h5repart_20K COMMAND $<TARGET_FILE:h5repart> -m 20000 family_file%05d.h5 fst_family%05d.h5) - set_tests_properties (H5REPART-h5repart_20K PROPERTIES DEPENDS H5REPART-clearall-objects) + set_tests_properties (H5REPART-h5repart_20K PROPERTIES + FIXTURES_REQUIRED clear_testrepart + ) # repartition family member size to 5 KB. add_test (NAME H5REPART-h5repart_5K COMMAND $<TARGET_FILE:h5repart> -m 5k family_file%05d.h5 scd_family%05d.h5) - set_tests_properties (H5REPART-h5repart_5K PROPERTIES DEPENDS H5REPART-clearall-objects) + set_tests_properties (H5REPART-h5repart_5K PROPERTIES + FIXTURES_REQUIRED clear_testrepart + ) # convert family file to sec2 file of 20,000 bytes add_test (NAME H5REPART-h5repart_single COMMAND $<TARGET_FILE:h5repart> -m 20000 -family_to_single family_file%05d.h5 family_to_single.h5) - set_tests_properties (H5REPART-h5repart_single PROPERTIES DEPENDS H5REPART-clearall-objects) + set_tests_properties (H5REPART-h5repart_single PROPERTIES + FIXTURES_REQUIRED clear_testrepart + ) # convert family file to sec2 file of 20,000 bytes (old argument) add_test (NAME H5REPART-h5repart_sec2 COMMAND $<TARGET_FILE:h5repart> -m 20000 -family_to_sec2 family_file%05d.h5 family_to_sec2.h5) - set_tests_properties (H5REPART-h5repart_sec2 PROPERTIES DEPENDS H5REPART-clearall-objects) + set_tests_properties (H5REPART-h5repart_sec2 PROPERTIES + FIXTURES_REQUIRED clear_testrepart + ) # test the output files repartitioned above. add_test (NAME H5REPART-h5repart_test COMMAND $<TARGET_FILE:h5repart_test>) - set_tests_properties (H5REPART-h5repart_test PROPERTIES DEPENDS "H5REPART-clearall-objects;H5REPART-h5repart_20K;H5REPART-h5repart_5K;H5REPART-h5repart_sec2") + set_tests_properties (H5REPART-h5repart_test PROPERTIES + DEPENDS "H5REPART-h5repart_20K;H5REPART-h5repart_5K;H5REPART-h5repart_single;H5REPART-h5repart_sec2" + ) set (H5_DEP_EXECUTABLES ${H5_DEP_EXECUTABLES} h5repart_test |