diff options
| -rw-r--r-- | INSTALL.ascired | 107 | ||||
| -rw-r--r-- | INSTALL.ibm.sp.parallel | 88 | ||||
| -rw-r--r-- | INSTALL_parallel.ascired | 58 | ||||
| -rw-r--r-- | MANIFEST | 6 |
4 files changed, 3 insertions, 256 deletions
diff --git a/INSTALL.ascired b/INSTALL.ascired deleted file mode 100644 index 43dea2a..0000000 --- a/INSTALL.ascired +++ /dev/null @@ -1,107 +0,0 @@ - -FOR THE INTEL TFLOPS MACHINE: - -Below are the step-by-step procedures for building, testing, and -installing both the sequential and parallel versions of the HDF5 library. - ---------------- -Sequential HDF5: ---------------- - -The setup process for building the sequential HDF5 library for the -ASCI Red machine is done by a coordination of events from sasn100 and -janus. Though janus can do compiling, it is better to build it -from sasn100 which has more complete building tools and runs faster. -It is also anti-social to tie up janus with compiling. The HDF5 building -requires the use of janus because one of steps is to execute a program -to find out the run-time characteristics of the TFLOPS machine. - -Assuming you have already unpacked the HDF5 tar-file into the -directory <hdf5>, follow the steps below: - -FROM SASN100, - -1) cd <hdf5> - -2) ./configure tflop - -3) make H5detect - - -FROM JANUS, - -4) cd <hdf5> - -5) make H5Tinit.c - - -FROM SASN100, - -6) make - - -When everything is finished compiling and linking, -you can run the tests by -FROM JANUS, - -7.1) Due to a bug, you must first remove the following line from - the file test/Makefile before the next step. - RUNTEST=$(LT_RUN) -7.2) make check - - -Once satisfied with the test results, you can install -the software by -FROM SASN100, - -8) make install - - ---------------- -Parallel HDF5: ---------------- - -The setup process for building the parallel version of the HDF5 library for the -ASCI Red machine is very similar to the sequential version. Since TFLOPS -does not support MPIO, we have prepared a shell-script file that configures -with the appropriate MPI library. - -Assuming you have already unpacked the HDF5 tar-file into the -directory <hdf5>, follow the steps below: -FROM SASN100, - -1) cd <hdf5> - -2) sh INSTALL_parallel.ascired /* this is different from the sequential version */ - -3) make H5detect - - -FROM JANUS, - -4) cd <hdf5> - -5) make H5Tinit.c - - -FROM SASN100, - -6) make - - -When everything is finished compiling and linking, -FROM JANUS, - -7.1) Due to a bug, you must first remove the following line from - the file test/Makefile before the next step. - RUNTEST=$(LT_RUN) -7.2) make check - - -Once satisfied with the parallel test results, as long as you -have the correct permission, -FROM SASN100, - -8) make install - - diff --git a/INSTALL.ibm.sp.parallel b/INSTALL.ibm.sp.parallel deleted file mode 100644 index b269527..0000000 --- a/INSTALL.ibm.sp.parallel +++ /dev/null @@ -1,88 +0,0 @@ -# How to create a parallel version of HDF5 on an IBM SP system -# that uses MPI and MPI-IO. - -# Unfortunately, the configure/make process to create the parallel version of -# HDF5 has not yet been automated to the same extent that the sequential -# version has. -# Read the INSTALL file to understand the configure/make process for the -# sequential (i.e., uniprocess) version of HDF5. -# The process for creating the parallel version of HDF5 using MPI-IO -# is similar, but first you will have to set up some environment variables -# with values specific to your local installation. -# The relevant variables are shown below, with values that work for LLNL's -# ASCI baby blue pacific SP as of the writing of these instructions (980210). - -# In addition to the environment variables, you _might_ also have to -# create a new file in the config directory. -# You will need to create this file only if the execution of the ./configure -# program aborts with an error after printing the message -# "checking whether byte ordering is bigendian..." -# -# If this is the case, create a new file in the config directory -# whose name is of the form architecture-vendor-OSversion -# (e.g., for baby blue pacific, this file is named powerpc-ibm-aix4.2.1.0) -# and which contains the line -# ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} -# if the target architecture is bigendian, or -# ac_cv_c_bigendian=${ac_cv_c_bigendian='no'} -# otherwise. -# Running the program ./bin/config.guess will print out the name -# of the new file you must create. - -# Don't try to make a parallel version of HDF5 from the same hdf5 root -# directory where you made a sequential version of HDF5 -- start with -# a fresh copy. -# Here are the flags you must set before running the ./configure program -# to create the parallel version of HDF5. -# (We use csh here, but of course you can adapt to whatever shell you like.) - -# compile for MPI jobs -setenv CC "/usr/local/mpich-1.1.2+romio_lgfiles/bin/mpicc" - -# -# next 4 for IBM mpi -# -#setenv CC /usr/lpp/ppe.poe/bin/mpcc_r - -# -# for both -# -setenv MP_PROCS 1 - - -# These compiler flags work on ASCI baby blue pacific (IBM SP), -# using IBM's MPI and Argonne's MPI-IO (ROMIO): -# -DHAVE_FUNCTION compiler accepts __FUNCTION__ notation -# -I/usr/local/mpio/include/ibm using ROMIO's MPI-IO header files -# -# The following flags are only needed when compiling/linking a user program -# for execution. -# -bI:/usr/include/piofs/piofs.exp this MPI-IO uses PIOFS file system -# -L/usr /local/mpio/lib/ibm -lmpio link to this MPI-IO lib -# -#setenv CFLAGS "-D_LARGE_FILES $CFLAGS" - -# The configure/make process needs to be able to run some programs, -# need to specify a processor pool. -# Also, don't prepend the process id in the output of the programs -# run by config/make. -setenv MP_RMPOOL 0 -setenv MP_LABELIO no - -# Once these variables are set to the proper values for your installation, -# you can run the configure program (i.e., ./configure) -# to set up the Makefiles, etc. -# After configuring, run the make as described in the INSTALL file. -# Once the configuration is complete, you can set any of your -# environment variables to whatever you like. - -# the files in the config directory, such as -# config/powerpc-ibm-aix4.2.1.0 -# config/powerpc-ibm-aix4.x -# config/powerpc-ibm-aix4.3.2.0 -# sometimes will need some help depending on subtlties of the installation - - -# When compiling and linking your application, don't forget to compile with -# mpcc and link to the MPI-IO library and the parallel version of the HDF5 -# library (that was created and installed with the configure/make process). diff --git a/INSTALL_parallel.ascired b/INSTALL_parallel.ascired deleted file mode 100644 index 648b093..0000000 --- a/INSTALL_parallel.ascired +++ /dev/null @@ -1,58 +0,0 @@ -#! /bin/sh -# How to create a parallel version of HDF5 on the Intel Asci Red System -# that uses MPI and MPI-IO. - -# Read the INSTALL.ascired file to understand the configure/make process -# for the sequential (i.e., uniprocessor) version of HDF5. -# The process for creating the parallel version of HDF5 using MPI-IO -# is similar, but first you will have to set up some environment variables -# with values specific to your local installation. -# The relevant variables are shown below, with values that work for Sandia'a -# ASCI Red Tflops machine as of the writing of these instructions (980421). - -# Don't try to make a parallel version of HDF5 from the same hdf5 root -# directory where you made a sequential version of HDF5 -- start with -# a fresh copy. -# Here are the flags you must set before running the ./configure program -# to create the parallel version of HDF5. -# (We use sh here, but of course you can adapt to whatever shell you like.) - -# compile for MPI jobs -#CC=cicc - -# The following flags are only needed when compiling/linking a user program -# for execution. -# - -# Using the MPICH libary by Daniel Sands. -# It contains both MPI-1 and MPI-IO functions. -ROMIO="${HOME}/MPIO/mpich" -if [ ! -d $ROMIO ] -then - echo "ROMIO directory ($ROMIO) not found" - echo "Aborted" - exit 1 -fi -mpi1_inc="" -mpi1_lib="" -mpio_inc="-I$ROMIO/include" -mpio_lib="-L$ROMIO/lib" - - -MPI_INC="$mpi1_inc $mpio_inc" -MPI_LIB="$mpi1_lib $mpio_lib" - - -# Once these variables are set to the proper values for your installation, -# you can run the configure program (i.e., ./configure tflop --enable-parallel=mpio) -# to set up the Makefiles, etc. -# After configuring, run the make as described in the INSTALL file. - -# When compiling and linking your application, don't forget to compile with -# cicc and link to the MPI-IO library and the parallel version of the HDF5 -# library (that was created and installed with the configure/make process). - -CPPFLAGS=$MPI_INC \ -LDFLAGS=$MPI_LIB \ -LIBS="-lmpich" \ -./configure --enable-parallel tflop $@ @@ -7,11 +7,9 @@ ./COPYING ./INSTALL -./INSTALL.ascired -./INSTALL.ibm.sp.parallel ./INSTALL_MAINT +./INSTALL_TFLOPS ./INSTALL_parallel -./INSTALL_parallel.ascired ./INSTALL_Windows.txt ./MANIFEST ./Makefile.dist @@ -28,6 +26,8 @@ ./bin/checkposix _DO_NOT_DISTRIBUTE_ ./bin/config.guess ./bin/config.sub +./bin/config_para_ibm_sp.sh +./bin/config_para_tflops.sh ./bin/debug-ohdr _DO_NOT_DISTRIBUTE_ ./bin/distdep ./bin/errors _DO_NOT_DISTRIBUTE_ |