summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--config/cmake/jrunTest.cmake239
-rw-r--r--config/cmake/vfdTest.cmake2
-rw-r--r--config/cmake/volTest.cmake2
-rw-r--r--config/cmake_ext_mod/grepTest.cmake123
-rw-r--r--config/cmake_ext_mod/runTest.cmake234
-rw-r--r--tools/test/perform/CMakeLists.txt6
-rw-r--r--tools/test/perform/pio_engine.c6
-rw-r--r--tools/test/perform/pio_perf.c4
-rw-r--r--tools/test/perform/pio_perf.h3
-rw-r--r--tools/test/perform/pio_standalone.c132
-rw-r--r--tools/test/perform/sio_perf.h3
11 files changed, 469 insertions, 285 deletions
diff --git a/config/cmake/jrunTest.cmake b/config/cmake/jrunTest.cmake
index ee4517c..0315536 100644
--- a/config/cmake/jrunTest.cmake
+++ b/config/cmake/jrunTest.cmake
@@ -75,16 +75,19 @@ message (STATUS "COMMAND Result: ${TEST_RESULT}")
# if the .err file exists and ERRROR_APPEND is enabled
if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err")
file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM)
- if (TEST_MASK_FILE)
- STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}")
- endif ()
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ if (TEST_MASK_FILE)
+ STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}")
+ endif ()
- if (NOT ERROR_APPEND)
- # write back to original .err file
- file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}")
- else ()
- # append error output to the stdout output file
- file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}")
+ if (NOT ERROR_APPEND)
+ # write back to original .err file
+ file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}")
+ else ()
+ # append error output to the stdout output file
+ file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}")
+ endif ()
endif ()
endif ()
@@ -122,150 +125,172 @@ endif ()
message (STATUS "COMMAND Error: ${TEST_ERROR}")
# compare output files to references unless this must be skipped
+set (TEST_COMPARE_RESULT 0)
if (NOT TEST_SKIP_COMPARE)
if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}")
- if (WIN32 OR MINGW)
- configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF)
- if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp")
- file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE})
+ file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ if (WIN32 OR MINGW)
+ configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF)
+ if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp")
+ file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE})
+ endif ()
+ #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
+ #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}")
endif ()
- #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
- #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}")
- endif ()
- if (NOT TEST_SORT_COMPARE)
- # now compare the output with the reference
- execute_process (
- COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE}
- RESULT_VARIABLE TEST_RESULT
- )
- else ()
- file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1)
- file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2)
- list (SORT v1)
- list (SORT v2)
- if (NOT v1 STREQUAL v2)
- set(TEST_RESULT 1)
+ if (NOT TEST_SORT_COMPARE)
+ # now compare the output with the reference
+ execute_process (
+ COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE}
+ RESULT_VARIABLE TEST_COMPARE_RESULT
+ )
+ else ()
+ file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1)
+ file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2)
+ list (SORT v1)
+ list (SORT v2)
+ if (NOT v1 STREQUAL v2)
+ set(TEST_COMPARE_RESULT 1)
+ endif ()
endif ()
- endif ()
- if (TEST_RESULT)
- set (TEST_RESULT 0)
- file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act)
- list (LENGTH test_act len_act)
- file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref)
- list (LENGTH test_ref len_ref)
- if (len_act GREATER 0 AND len_ref GREATER 0)
- math (EXPR _FP_LEN "${len_ref} - 1")
- foreach (line RANGE 0 ${_FP_LEN})
- list (GET test_act ${line} str_act)
- list (GET test_ref ${line} str_ref)
- if (NOT str_act STREQUAL str_ref)
- if (str_act)
- set (TEST_RESULT 1)
- message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ if (TEST_COMPARE_RESULT)
+ set (TEST_COMPARE_RESULT 0)
+ file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act)
+ list (LENGTH test_act len_act)
+ file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref)
+ list (LENGTH test_ref len_ref)
+ if (len_act GREATER 0 AND len_ref GREATER 0)
+ math (EXPR _FP_LEN "${len_ref} - 1")
+ foreach (line RANGE 0 ${_FP_LEN})
+ list (GET test_act ${line} str_act)
+ list (GET test_ref ${line} str_ref)
+ if (NOT str_act STREQUAL str_ref)
+ if (str_act)
+ set (TEST_COMPARE_RESULT 1)
+ message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ endif ()
endif ()
+ endforeach ()
+ else ()
+ if (len_act EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty")
+ endif ()
+ if (len_ref EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty")
endif ()
- endforeach ()
- else ()
- if (len_act EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty")
endif ()
- if (len_ref EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty")
+ if (NOT len_act EQUAL len_ref)
+ set (TEST_COMPARE_RESULT 1)
endif ()
endif ()
- if (NOT len_act EQUAL len_ref)
- set (TEST_RESULT 1)
- endif ()
endif ()
- message (STATUS "COMPARE Result: ${TEST_RESULT}")
+ message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}")
# again, if return value is !=0 scream and shout
- if (TEST_RESULT)
+ if (TEST_COMPARE_RESULT)
message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}")
endif ()
endif ()
# now compare the .err file with the error reference, if supplied
+ set (TEST_ERRREF_RESULT 0)
if (TEST_ERRREF)
- if (WIN32 OR MINGW)
- configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF)
- if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp")
- file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF})
+ file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM)
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ if (WIN32 OR MINGW)
+ configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF)
+ if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp")
+ file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF})
+ endif ()
+ #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM)
+ #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}")
endif ()
- #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM)
- #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}")
- endif ()
- # now compare the error output with the error reference
- execute_process (
- COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF}
- RESULT_VARIABLE TEST_RESULT
- )
- if (TEST_RESULT)
- set (TEST_RESULT 0)
- file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act)
- list (LENGTH test_act len_act)
- file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref)
- list (LENGTH test_ref len_ref)
- math (EXPR _FP_LEN "${len_ref} - 1")
- if (len_act GREATER 0 AND len_ref GREATER 0)
+ # now compare the error output with the error reference
+ execute_process (
+ COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF}
+ RESULT_VARIABLE TEST_ERRREF_RESULT
+ )
+ if (TEST_ERRREF_RESULT)
+ set (TEST_ERRREF_RESULT 0)
+ file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act)
+ list (LENGTH test_act len_act)
+ file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref)
+ list (LENGTH test_ref len_ref)
math (EXPR _FP_LEN "${len_ref} - 1")
- foreach (line RANGE 0 ${_FP_LEN})
- list (GET test_act ${line} str_act)
- list (GET test_ref ${line} str_ref)
- if (NOT str_act STREQUAL str_ref)
- if (str_act)
- set (TEST_RESULT 1)
- message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ if (len_act GREATER 0 AND len_ref GREATER 0)
+ math (EXPR _FP_LEN "${len_ref} - 1")
+ foreach (line RANGE 0 ${_FP_LEN})
+ list (GET test_act ${line} str_act)
+ list (GET test_ref ${line} str_ref)
+ if (NOT str_act STREQUAL str_ref)
+ if (str_act)
+ set (TEST_ERRREF_RESULT 1)
+ message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ endif ()
endif ()
+ endforeach ()
+ else ()
+ if (len_act EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty")
+ endif ()
+ if (len_ref EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty")
endif ()
- endforeach ()
- else ()
- if (len_act EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty")
endif ()
- if (len_ref EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty")
+ if (NOT len_act EQUAL len_ref)
+ set (TEST_ERRREF_RESULT 1)
endif ()
endif ()
- if (NOT len_act EQUAL len_ref)
- set (TEST_RESULT 1)
- endif ()
endif ()
- message (STATUS "COMPARE Result: ${TEST_RESULT}")
+ message (STATUS "COMPARE Result: ${TEST_ERRREF_RESULT}")
# again, if return value is !=0 scream and shout
- if (TEST_RESULT)
+ if (TEST_ERRREF_RESULT)
message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}")
endif ()
endif ()
endif ()
+set (TEST_GREP_RESULT 0)
if (TEST_GREP_COMPARE)
# now grep the output with the reference
file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM)
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ # TEST_REFERENCE should always be matched
+ string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM})
+ string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT)
+ if (NOT TEST_GREP_RESULT)
+ message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}")
+ endif ()
- # TEST_REFERENCE should always be matched
- string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM})
- string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT)
- if (NOT TEST_RESULT)
- message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}")
- endif ()
-
- string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM})
- if (TEST_EXPECT)
- # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match
- string (LENGTH "${TEST_MATCH}" TEST_RESULT)
- if (TEST_RESULT)
- message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}")
+ string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM})
+ if (TEST_EXPECT)
+ # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match
+ string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT)
+ if (TEST_GREP_RESULT)
+ message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}")
+ endif ()
endif ()
endif ()
endif ()
+# dump the output unless nodisplay option is set
+if (TEST_SKIP_COMPARE AND NOT TEST_NO_DISPLAY)
+ file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM)
+ execute_process (
+ COMMAND ${CMAKE_COMMAND} -E echo ${TEST_STREAM}
+ RESULT_VARIABLE TEST_RESULT
+ )
+endif ()
+
# everything went fine...
message (STATUS "${TEST_PROGRAM} Passed")
diff --git a/config/cmake/vfdTest.cmake b/config/cmake/vfdTest.cmake
index 12ee40b..c07d005 100644
--- a/config/cmake/vfdTest.cmake
+++ b/config/cmake/vfdTest.cmake
@@ -64,7 +64,7 @@ if (NOT TEST_RESULT EQUAL TEST_EXPECT)
if (NOT TEST_NOERRDISPLAY)
if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out")
file (READ ${TEST_FOLDER}/${TEST_OUTPUT}_${TEST_VFD}.out TEST_STREAM)
- message (STATUS "Output USING ${TEST_VFD}:\n${TEST_STREAM}")
+ message (STATUS "Output USING ${TEST_VFD}:\n${TEST_STREAM}")
endif ()
endif ()
message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != ${TEST_EXPECT}.\n${TEST_ERROR}")
diff --git a/config/cmake/volTest.cmake b/config/cmake/volTest.cmake
index 1dcd2b1..e735109 100644
--- a/config/cmake/volTest.cmake
+++ b/config/cmake/volTest.cmake
@@ -64,7 +64,7 @@ if (NOT TEST_RESULT EQUAL TEST_EXPECT)
if (NOT TEST_NOERRDISPLAY)
if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.out")
file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.out TEST_STREAM)
- message (STATUS "Output USING ${TEST_VOL}:\n${TEST_STREAM}")
+ message (STATUS "Output USING ${TEST_VOL}:\n${TEST_STREAM}")
endif ()
endif ()
message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != ${TEST_EXPECT}.\n${TEST_ERROR}")
diff --git a/config/cmake_ext_mod/grepTest.cmake b/config/cmake_ext_mod/grepTest.cmake
index a6f1c7f..c65c951 100644
--- a/config/cmake_ext_mod/grepTest.cmake
+++ b/config/cmake_ext_mod/grepTest.cmake
@@ -82,93 +82,102 @@ if (TEST_FIND_RESULT GREATER 0)
endif ()
# if the TEST_ERRREF exists grep the error output with the error reference
+set (TEST_ERRREF_RESULT 0)
if (TEST_ERRREF)
# if the .err file exists grep the error output with the error reference before comparing stdout
if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err")
file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_ERR_STREAM)
-
- # TEST_ERRREF should always be matched
- string (REGEX MATCH "${TEST_ERRREF}" TEST_MATCH ${TEST_ERR_STREAM})
- string (COMPARE EQUAL "${TEST_ERRREF}" "${TEST_MATCH}" TEST_RESULT)
- if (NOT TEST_RESULT)
- message (FATAL_ERROR "Failed: The error output of ${TEST_PROGRAM} did not contain ${TEST_ERRREF}")
+ list(LENGTH TEST_ERR_STREAM test_len)
+ if (test_len GREATER 0)
+ # TEST_ERRREF should always be matched
+ string (REGEX MATCH "${TEST_ERRREF}" TEST_MATCH ${TEST_ERR_STREAM})
+ string (COMPARE EQUAL "${TEST_ERRREF}" "${TEST_MATCH}" TEST_ERRREF_RESULT)
+ if (NOT TEST_ERRREF_RESULT)
+ message (FATAL_ERROR "Failed: The error output of ${TEST_PROGRAM} did not contain ${TEST_ERRREF}")
+ endif ()
endif ()
endif ()
#always compare output file to reference unless this must be skipped
+ set (TEST_COMPARE_RESULT 0)
if (NOT TEST_SKIP_COMPARE)
if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}")
- if (WIN32 OR MINGW)
- configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF)
- if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp")
- file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE})
+ file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ if (WIN32 OR MINGW)
+ configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF)
+ if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp")
+ file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE})
+ endif ()
+ #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
+ #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}")
endif ()
- #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
- #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}")
- endif ()
- if (NOT TEST_SORT_COMPARE)
- # now compare the output with the reference
- execute_process (
- COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE}
- RESULT_VARIABLE TEST_RESULT
- )
- else ()
- file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1)
- file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2)
- list (SORT v1)
- list (SORT v2)
- if (NOT v1 STREQUAL v2)
- set(TEST_RESULT 1)
+ if (NOT TEST_SORT_COMPARE)
+ # now compare the output with the reference
+ execute_process (
+ COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE}
+ RESULT_VARIABLE TEST_COMPARE_RESULT
+ )
+ else ()
+ file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1)
+ file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2)
+ list (SORT v1)
+ list (SORT v2)
+ if (NOT v1 STREQUAL v2)
+ set(TEST_COMPARE_RESULT 1)
+ endif ()
endif ()
- endif ()
- if (TEST_RESULT)
- set (TEST_RESULT 0)
- file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act)
- list (LENGTH test_act len_act)
- file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref)
- list (LENGTH test_ref len_ref)
- if (len_act GREATER 0 AND len_ref GREATER 0)
- math (EXPR _FP_LEN "${len_ref} - 1")
- foreach (line RANGE 0 ${_FP_LEN})
- list (GET test_act ${line} str_act)
- list (GET test_ref ${line} str_ref)
- if (NOT str_act STREQUAL str_ref)
- if (str_act)
- set (TEST_RESULT 1)
- message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ if (TEST_COMPARE_RESULT)
+ set (TEST_COMPARE_RESULT 0)
+ file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act)
+ list (LENGTH test_act len_act)
+ file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref)
+ list (LENGTH test_ref len_ref)
+ if (len_act GREATER 0 AND len_ref GREATER 0)
+ math (EXPR _FP_LEN "${len_ref} - 1")
+ foreach (line RANGE 0 ${_FP_LEN})
+ list (GET test_act ${line} str_act)
+ list (GET test_ref ${line} str_ref)
+ if (NOT str_act STREQUAL str_ref)
+ if (str_act)
+ set (TEST_COMPARE_RESULT 1)
+ message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ endif ()
endif ()
+ endforeach ()
+ else ()
+ if (len_act EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty")
+ endif ()
+ if (len_ref EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty")
endif ()
- endforeach ()
- else ()
- if (len_act EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty")
endif ()
- if (len_ref EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty")
+ if (NOT len_act EQUAL len_ref)
+ set (TEST_COMPARE_RESULT 1)
endif ()
endif ()
- if (NOT len_act EQUAL len_ref)
- set (TEST_RESULT 1)
- endif ()
endif ()
- message (STATUS "COMPARE Result: ${TEST_RESULT}")
+ message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}")
# again, if return value is !=0 scream and shout
- if (TEST_RESULT)
+ if (TEST_COMPARE_RESULT)
message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}")
endif ()
endif ()
endif ()
else ()
# else grep the output with the reference
+ set (TEST_GREP_RESULT 0)
file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM)
# TEST_REFERENCE should always be matched
string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM})
- string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT)
- if (NOT TEST_RESULT)
+ string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT)
+ if (NOT TEST_GREP_RESULT)
message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}")
endif ()
endif ()
@@ -178,8 +187,8 @@ if (TEST_FILTER)
string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM})
if (TEST_EXPECT)
# TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match
- string (LENGTH "${TEST_MATCH}" TEST_RESULT)
- if (TEST_RESULT)
+ string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT)
+ if (TEST_GREP_RESULT)
message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}")
endif ()
endif ()
diff --git a/config/cmake_ext_mod/runTest.cmake b/config/cmake_ext_mod/runTest.cmake
index 0c4a5a0..885e4f7 100644
--- a/config/cmake_ext_mod/runTest.cmake
+++ b/config/cmake_ext_mod/runTest.cmake
@@ -90,18 +90,21 @@ message (STATUS "COMMAND Result: ${TEST_RESULT}")
# if the .err file exists and ERRROR_APPEND is enabled
if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err")
file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM)
- if (TEST_MASK_FILE)
- STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}")
- endif ()
- # remove special output
- string (REGEX REPLACE "^.*_pmi_alps[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}")
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ if (TEST_MASK_FILE)
+ STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}")
+ endif ()
+ # remove special output
+ string (REGEX REPLACE "^.*_pmi_alps[^\n]+\n" "" TEST_STREAM "${TEST_STREAM}")
- if (NOT ERROR_APPEND)
- # write back to original .err file
- file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}")
- else ()
- # append error output to the stdout output file
- file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}")
+ if (NOT ERROR_APPEND)
+ # write back to original .err file
+ file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}")
+ else ()
+ # append error output to the stdout output file
+ file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}")
+ endif ()
endif ()
endif ()
@@ -203,146 +206,159 @@ if (TEST_REF_FILTER)
endif ()
# compare output files to references unless this must be skipped
+set (TEST_COMPARE_RESULT 0)
if (NOT TEST_SKIP_COMPARE)
if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}")
- if (WIN32 OR MINGW)
- configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF)
- if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp")
- file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE})
+ file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ if (WIN32 OR MINGW)
+ configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF)
+ if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp")
+ file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE})
+ endif ()
+ #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
+ #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}")
endif ()
- #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM)
- #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}")
- endif ()
- if (NOT TEST_SORT_COMPARE)
- # now compare the output with the reference
- execute_process (
- COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE}
- RESULT_VARIABLE TEST_RESULT
- )
- else ()
- file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1)
- file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2)
- list (SORT v1)
- list (SORT v2)
- if (NOT v1 STREQUAL v2)
- set(TEST_RESULT 1)
+ if (NOT TEST_SORT_COMPARE)
+ # now compare the output with the reference
+ execute_process (
+ COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE}
+ RESULT_VARIABLE TEST_COMPARE_RESULT
+ )
+ else ()
+ file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1)
+ file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2)
+ list (SORT v1)
+ list (SORT v2)
+ if (NOT v1 STREQUAL v2)
+ set(TEST_COMPARE_RESULT 1)
+ endif ()
endif ()
- endif ()
- if (TEST_RESULT)
- set (TEST_RESULT 0)
- file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act)
- list (LENGTH test_act len_act)
- file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref)
- list (LENGTH test_ref len_ref)
- if (len_act GREATER 0 AND len_ref GREATER 0)
- math (EXPR _FP_LEN "${len_ref} - 1")
- foreach (line RANGE 0 ${_FP_LEN})
- list (GET test_act ${line} str_act)
- list (GET test_ref ${line} str_ref)
- if (NOT str_act STREQUAL str_ref)
- if (str_act)
- set (TEST_RESULT 1)
- message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ if (TEST_COMPARE_RESULT)
+ set (TEST_COMPARE_RESULT 0)
+ file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act)
+ list (LENGTH test_act len_act)
+ file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref)
+ list (LENGTH test_ref len_ref)
+ if (len_act GREATER 0 AND len_ref GREATER 0)
+ math (EXPR _FP_LEN "${len_ref} - 1")
+ foreach (line RANGE 0 ${_FP_LEN})
+ list (GET test_act ${line} str_act)
+ list (GET test_ref ${line} str_ref)
+ if (NOT str_act STREQUAL str_ref)
+ if (str_act)
+ set (TEST_COMPARE_RESULT 1)
+ message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ endif ()
endif ()
+ endforeach ()
+ else ()
+ if (len_act EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty")
+ endif ()
+ if (len_ref EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty")
endif ()
- endforeach ()
- else ()
- if (len_act EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty")
endif ()
- if (len_ref EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty")
+ if (NOT len_act EQUAL len_ref)
+ set (TEST_COMPARE_RESULT 1)
endif ()
endif ()
- if (NOT len_act EQUAL len_ref)
- set (TEST_RESULT 1)
- endif ()
endif ()
- message (STATUS "COMPARE Result: ${TEST_RESULT}")
+ message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}")
# again, if return value is !=0 scream and shout
- if (TEST_RESULT)
+ if (TEST_COMPARE_RESULT)
message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}")
endif ()
endif ()
# now compare the .err file with the error reference, if supplied
+ set (TEST_ERRREF_RESULT 0)
if (TEST_ERRREF)
- if (WIN32 OR MINGW)
- configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF)
- if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp")
- file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF})
+ file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM)
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ if (WIN32 OR MINGW)
+ configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF)
+ if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp")
+ file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF})
+ endif ()
+ #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM)
+ #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}")
endif ()
- #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM)
- #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}")
- endif ()
- # now compare the error output with the error reference
- execute_process (
- COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF}
- RESULT_VARIABLE TEST_RESULT
- )
- if (TEST_RESULT)
- set (TEST_RESULT 0)
- file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act)
- list (LENGTH test_act len_act)
- file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref)
- list (LENGTH test_ref len_ref)
- math (EXPR _FP_LEN "${len_ref} - 1")
- if (len_act GREATER 0 AND len_ref GREATER 0)
+ # now compare the error output with the error reference
+ execute_process (
+ COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF}
+ RESULT_VARIABLE TEST_ERRREF_RESULT
+ )
+ if (TEST_ERRREF_RESULT)
+ set (TEST_ERRREF_RESULT 0)
+ file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act)
+ list (LENGTH test_act len_act)
+ file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref)
+ list (LENGTH test_ref len_ref)
math (EXPR _FP_LEN "${len_ref} - 1")
- foreach (line RANGE 0 ${_FP_LEN})
- list (GET test_act ${line} str_act)
- list (GET test_ref ${line} str_ref)
- if (NOT str_act STREQUAL str_ref)
- if (str_act)
- set (TEST_RESULT 1)
- message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ if (len_act GREATER 0 AND len_ref GREATER 0)
+ math (EXPR _FP_LEN "${len_ref} - 1")
+ foreach (line RANGE 0 ${_FP_LEN})
+ list (GET test_act ${line} str_act)
+ list (GET test_ref ${line} str_ref)
+ if (NOT str_act STREQUAL str_ref)
+ if (str_act)
+ set (TEST_ERRREF_RESULT 1)
+ message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n")
+ endif ()
endif ()
+ endforeach ()
+ else ()
+ if (len_act EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty")
+ endif ()
+ if (len_ref EQUAL 0)
+ message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty")
endif ()
- endforeach ()
- else ()
- if (len_act EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty")
endif ()
- if (len_ref EQUAL 0)
- message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty")
+ if (NOT len_act EQUAL len_ref)
+ set (TEST_ERRREF_RESULT 1)
endif ()
endif ()
- if (NOT len_act EQUAL len_ref)
- set (TEST_RESULT 1)
- endif ()
endif ()
- message (STATUS "COMPARE Result: ${TEST_RESULT}")
+ message (STATUS "COMPARE Result: ${TEST_ERRREF_RESULT}")
# again, if return value is !=0 scream and shout
- if (TEST_RESULT)
+ if (TEST_ERRREF_RESULT)
message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}")
endif ()
endif ()
endif ()
+set (TEST_GREP_RESULT 0)
if (TEST_GREP_COMPARE)
# now grep the output with the reference
file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM)
+ list(LENGTH TEST_STREAM test_len)
+ if (test_len GREATER 0)
+ # TEST_REFERENCE should always be matched
+ string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM})
+ string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT)
+ if (NOT TEST_GREP_RESULT)
+ message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}")
+ endif ()
- # TEST_REFERENCE should always be matched
- string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM})
- string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT)
- if (NOT TEST_RESULT)
- message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}")
- endif ()
-
- string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM})
- if (TEST_EXPECT)
- # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match
- string (LENGTH "${TEST_MATCH}" TEST_RESULT)
- if (TEST_RESULT)
- message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}")
+ string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM})
+ if (TEST_EXPECT)
+ # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match
+ string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT)
+ if (TEST_GREP_RESULT)
+ message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}")
+ endif ()
endif ()
endif ()
endif ()
diff --git a/tools/test/perform/CMakeLists.txt b/tools/test/perform/CMakeLists.txt
index f250065..a01a88f 100644
--- a/tools/test/perform/CMakeLists.txt
+++ b/tools/test/perform/CMakeLists.txt
@@ -21,7 +21,7 @@ endif ()
set_target_properties (h5perf_serial PROPERTIES FOLDER perform)
if (HDF5_BUILD_PERFORM_STANDALONE)
- #-- Adding test for h5perf_serial_alone
+ #-- Adding test for h5perf_serial_alone - io_timer.c includes
set (h5perf_serial_alone_SOURCES
${HDF5_TOOLS_DIR}/lib/io_timer.c
${HDF5_TOOLS_TEST_PERFORM_SOURCE_DIR}/sio_perf.c
@@ -32,10 +32,10 @@ if (HDF5_BUILD_PERFORM_STANDALONE)
target_include_directories (h5perf_serial_alone PRIVATE "${HDF5_SRC_DIR};${HDF5_BINARY_DIR};${HDF5_TOOLS_DIR}/lib;$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>")
if (NOT BUILD_SHARED_LIBS)
TARGET_C_PROPERTIES (h5perf_serial_alone STATIC)
- target_link_libraries (h5perf_serial_alone PRIVATE ${HDF5_LIB_TARGET})
+ target_link_libraries (h5perf_serial_alone PRIVATE ${HDF5_LIB_TARGET} "$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_LIBRARIES}>")
else ()
TARGET_C_PROPERTIES (h5perf_serial_alone SHARED)
- target_link_libraries (h5perf_serial_alone PRIVATE ${HDF5_LIBSH_TARGET})
+ target_link_libraries (h5perf_serial_alone PRIVATE ${HDF5_LIBSH_TARGET} "$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_LIBRARIES}>")
endif ()
set_target_properties (h5perf_serial_alone PROPERTIES FOLDER perform)
set_property (TARGET h5perf_serial_alone
diff --git a/tools/test/perform/pio_engine.c b/tools/test/perform/pio_engine.c
index 77c04ab..5d8474b 100644
--- a/tools/test/perform/pio_engine.c
+++ b/tools/test/perform/pio_engine.c
@@ -208,7 +208,7 @@ do_pio(parameters param)
bsize = buf_size; /* Actual buffer size */
}
else {
- snbytes = (off_t)sqrt(nbytes); /* General dataset size */
+ snbytes = (off_t)sqrt((double)nbytes); /* General dataset size */
bsize = buf_size * blk_size; /* Actual buffer size */
}
@@ -601,7 +601,7 @@ do_write(results *res, file_descr *fd, parameters *parms, long ndsets,
/* nbytes is always the number of bytes per dataset (1D or 2D). If the
dataspace is 2D, snbytes is the size of a side of the dataset square.
*/
- snbytes = (off_t)sqrt(nbytes);
+ snbytes = (off_t)sqrt((double)nbytes);
/* Contiguous Pattern: */
if (!parms->interleaved) {
@@ -1577,7 +1577,7 @@ do_read(results *res, file_descr *fd, parameters *parms, long ndsets,
/* nbytes is always the number of bytes per dataset (1D or 2D). If the
dataspace is 2D, snbytes is the size of a side of the 'dataset square'.
*/
- snbytes = (off_t)sqrt(nbytes);
+ snbytes = (off_t)sqrt((double)nbytes);
bsize = buf_size * blk_size;
diff --git a/tools/test/perform/pio_perf.c b/tools/test/perform/pio_perf.c
index 9f4d116..5977731 100644
--- a/tools/test/perform/pio_perf.c
+++ b/tools/test/perform/pio_perf.c
@@ -1155,9 +1155,9 @@ report_parameters(struct options *opts)
recover_size_and_print((long long)(opts->num_bpp * opts->max_num_procs), "\n");
HDfprintf(output, "rank %d: File size=", rank);
- recover_size_and_print((long long)(pow(opts->num_bpp * opts->min_num_procs,2)
+ recover_size_and_print((long long)(pow((double)(opts->num_bpp * opts->min_num_procs),2)
* opts->num_dsets), ":");
- recover_size_and_print((long long)(pow(opts->num_bpp * opts->max_num_procs,2)
+ recover_size_and_print((long long)(pow((double)(opts->num_bpp * opts->max_num_procs),2)
* opts->num_dsets), "\n");
HDfprintf(output, "rank %d: Transfer buffer size=", rank);
diff --git a/tools/test/perform/pio_perf.h b/tools/test/perform/pio_perf.h
index 7605f20..55d721e 100644
--- a/tools/test/perform/pio_perf.h
+++ b/tools/test/perform/pio_perf.h
@@ -13,12 +13,13 @@
#ifndef PIO_PERF_H__
#define PIO_PERF_H__
-#include "io_timer.h"
#ifndef STANDALONE
+#include "io_timer.h"
#include "h5test.h"
#include "h5tools.h"
#include "h5tools_utils.h"
#else
+#include "io_timer.h"
#include "pio_standalone.h"
#endif
diff --git a/tools/test/perform/pio_standalone.c b/tools/test/perform/pio_standalone.c
index 0fba904..8cdca85 100644
--- a/tools/test/perform/pio_standalone.c
+++ b/tools/test/perform/pio_standalone.c
@@ -164,3 +164,135 @@ print_version(const char *progname)
progname, H5_VERS_MAJOR, H5_VERS_MINOR, H5_VERS_RELEASE,
H5_VERS_SUBRELEASE[0] ? "-" : "", H5_VERS_SUBRELEASE);
}
+
+#ifdef STANDALONE
+/*
+ * Function: h5_set_info_object
+ * Purpose: Process environment variables setting to set up MPI Info
+ * object.
+ * Return: 0 if all is fine; otherwise non-zero.
+ * Programmer: Albert Cheng, 2002/05/21.
+ * Modifications:
+ * Bill Wendling, 2002/05/31
+ * Modified so that the HDF5_MPI_INFO environment variable can
+ * be a semicolon separated list of "key=value" pairings. Most
+ * of the code is to remove any whitespaces which might be
+ * surrounding the "key=value" pairs.
+ */
+int
+h5_set_info_object(void)
+{
+ char *envp; /* environment pointer */
+ int ret_value=0;
+
+ /* handle any MPI INFO hints via $HDF5_MPI_INFO */
+ if ((envp = HDgetenv("HDF5_MPI_INFO")) != NULL){
+ char *next, *valp;
+
+ valp = envp = next = HDstrdup(envp);
+
+ if (!valp) return 0;
+
+ /* create an INFO object if not created yet */
+ if (h5_io_info_g == MPI_INFO_NULL)
+ MPI_Info_create(&h5_io_info_g);
+
+ do {
+ size_t len;
+ char *key_val, *endp, *namep;
+
+ if (*valp == ';')
+ valp++;
+
+ /* copy key/value pair into temporary buffer */
+ len = strcspn(valp, ";");
+ next = &valp[len];
+ key_val = (char *)HDcalloc(1, len + 1);
+
+ /* increment the next pointer past the terminating semicolon */
+ if (*next == ';')
+ ++next;
+
+ namep = HDstrncpy(key_val, valp, len);
+
+ /* pass up any beginning whitespaces */
+ while (*namep && (*namep == ' ' || *namep == '\t'))
+ namep++;
+
+ if (!*namep) continue; /* was all white space, so move to next k/v pair */
+
+ /* eat up any ending white spaces */
+ endp = &namep[HDstrlen(namep) - 1];
+
+ while (endp && (*endp == ' ' || *endp == '\t'))
+ *endp-- = '\0';
+
+ /* find the '=' */
+ valp = HDstrchr(namep, '=');
+
+ if (valp != NULL) { /* it's a valid key/value pairing */
+ char *tmp_val = valp + 1;
+
+ /* change '=' to \0, move valp down one */
+ *valp-- = '\0';
+
+ /* eat up ending whitespace on the "key" part */
+ while (*valp == ' ' || *valp == '\t')
+ *valp-- = '\0';
+
+ valp = tmp_val;
+
+ /* eat up beginning whitespace on the "value" part */
+ while (*valp == ' ' || *valp == '\t')
+ *valp++ = '\0';
+
+ /* actually set the darned thing */
+ if (MPI_SUCCESS != MPI_Info_set(h5_io_info_g, namep, valp)) {
+ HDprintf("MPI_Info_set failed\n");
+ ret_value = -1;
+ }
+ }
+
+ valp = next;
+ HDfree(key_val);
+ } while (next && *next);
+
+ HDfree(envp);
+ }
+
+ return ret_value;
+}
+
+
+/*
+ * Function: h5_dump_info_object
+ * Purpose: Display content of an MPI Info object
+ * Return: void
+ * Programmer: Albert Cheng 2002/05/21
+ * Modifications:
+ */
+void
+h5_dump_info_object(MPI_Info info)
+{
+ char key[MPI_MAX_INFO_KEY+1];
+ char value[MPI_MAX_INFO_VAL+1];
+ int flag;
+ int i, nkeys;
+
+ HDprintf("Dumping MPI Info Object (up to %d bytes per item):\n", MPI_MAX_INFO_VAL);
+ if (info==MPI_INFO_NULL){
+ HDprintf("object is MPI_INFO_NULL\n");
+ }
+ else {
+ MPI_Info_get_nkeys(info, &nkeys);
+ HDprintf("object has %d items\n", nkeys);
+ for (i=0; i<nkeys; i++){
+ MPI_Info_get_nthkey(info, i, key);
+ MPI_Info_get(info, key, MPI_MAX_INFO_VAL, value, &flag);
+ HDprintf("%s=%s\n", key, value);
+ }
+
+ }
+}
+#endif /* STANDALONE */
+
diff --git a/tools/test/perform/sio_perf.h b/tools/test/perform/sio_perf.h
index 83caf54..d26c78b 100644
--- a/tools/test/perform/sio_perf.h
+++ b/tools/test/perform/sio_perf.h
@@ -13,12 +13,13 @@
#ifndef SIO_PERF_H__
#define SIO_PERF_H__
-#include "io_timer.h"
#ifndef STANDALONE
+#include "io_timer.h"
#include "h5test.h"
#include "h5tools.h"
#include "h5tools_utils.h"
#else
+#include "io_timer.h"
#include "sio_standalone.h"
#endif
generated by cgit v0.12 at 2024-10-30 22:10:07 (GMT)