summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--c++/Makefile.in111
-rw-r--r--c++/aclocal.m4434
-rwxr-xr-xc++/configure2308
-rw-r--r--c++/configure.in371
4 files changed, 3224 insertions, 0 deletions
diff --git a/c++/Makefile.in b/c++/Makefile.in
new file mode 100644
index 0000000..0c25a90
--- /dev/null
+++ b/c++/Makefile.in
@@ -0,0 +1,111 @@
+## Top-level HDF5-C++ Makefile(.in)
+##
+## Copyright (C) 2000 National Center for Supercomputing Applications.
+## All rights reserved.
+##
+##
+## This makefile mostly just reinvokes make in the various subdirectories
+## but does so in the correct order. You can alternatively invoke make from
+## each subdirectory manually.
+##
+top_srcdir=@top_srcdir@
+top_builddir=..
+srcdir=@srcdir@
+
+@COMMENCE@
+
+# Subdirectories in build-order (not including `examples')
+SUBDIRS=src test
+
+##############################################################################
+## T A R G E T S
+##
+## all: Build libraries, header files, tests, and programs in the
+## various subdirectories but does not run tests or install the
+## library, header files, or programs. The components can be
+## built individually with the targets lib, progs, and tests.
+##
+## check: Test the uninstalled library to make sure it works. You may
+## also say `test' or `_test' (`test' doesn't work from the top
+## level directory for some versions of make because `test' is
+## also a directory).
+##
+## install: Installs libraries, header files, programs, and documentation
+## in the various directories under the prefix directory (lib,
+## include, bin, man, info). Use the `--prefix=PATH' option
+## to `configure' (or `config.status') or say `--help' for
+## other alternatives. The default prefix is `/usr/local'.
+##
+## uninstall: Delete all the installed files that the `install' target
+## created (but not the noninstalled files such as `make all'
+## created).
+##
+## clean: Removes temporary files except those that record the
+## configuration and those that are part of the distribution.
+##
+## mostlyclean: Like `clean' except it doesn't delete a few files like
+## libraries, programs, and/or generated header files because
+## regenerating them is rarely necessary and takes a lot of time.
+##
+## distclean: Deletes all files that are created by configuring or building
+## HDF5. If you have unpacked the source and built HDF5 without
+## creating any other files, then `make distclean' will leave
+## only the files that were in the distrubution.
+##
+## maintainer-clean:
+## Like `distclean' except it deletes more files. It deletes
+## all generated files. This target is not intended for normal
+## users; it deletes files that may require special tools to
+## rebuild.
+##
+## TAGS: Updates the tags table for this program.
+##
+## dep depend: Builds dependencies in all subdirectories. These targets
+## might not be available on certain combinations of make
+## programs and C compilers. At the other extreme, the GNU
+## make used in combination with gcc will maintain dependency
+## information automatically.
+lib progs check test _test uninstall:
+ @@SETX@; for d in $(SUBDIRS); do \
+ (cd $$d && $(MAKE) $@) || exit 1; \
+ done
+
+tests TAGS dep depend:
+ @@SETX@; for d in $(SUBDIRS) examples; do \
+ (cd $$d && $(MAKE) $@) || exit 1; \
+ done
+
+install:
+ @@SETX@; for d in $(SUBDIRS); do \
+ (cd $$d && $(MAKE) $@) || exit 1; \
+ done
+ @$(LT) --mode=finish $(libdir);
+
+.PHONY: all lib progs test _test install uninstall dep depend clean \
+ mostlyclean distclean maintainer-clean
+
+clean mostlyclean:
+ @@SETX@; for d in $(SUBDIRS) examples; do \
+ (cd $$d && $(MAKE) $@); \
+ done
+ -$(RM) conftest conftest.c
+
+distclean:
+ @@SETX@; for d in $(SUBDIRS) examples; do \
+ (cd $$d && $(MAKE) $@); \
+ done
+ -$(RM) config/commence config/conclude
+ -$(RM) config/stamp1 config/stamp2 config/depend?
+ -$(RM) config.cache config.log config.status
+ -$(RM) src/H5config.h src/H5pubconf.h
+ -$(RM) libtool Makefile
+
+maintainer-clean:
+ @echo "This target is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ @@SETX@; for d in $(SUBDIRS) examples; do \
+ (cd $$d && $(MAKE) $@); \
+ done
+ -$(RM) config.cache config.log config.status src/H5config.h
+ -$(RM) configure src/H5config.h.in
+
diff --git a/c++/aclocal.m4 b/c++/aclocal.m4
new file mode 100644
index 0000000..c41d84a
--- /dev/null
+++ b/c++/aclocal.m4
@@ -0,0 +1,434 @@
+## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
+## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$lt_target" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
+ # Accept absolute paths.
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ ac_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN(AC_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(ac_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
+ else
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi])
+NM="$ac_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
+ fi
+])
+
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
diff --git a/c++/configure b/c++/configure
new file mode 100755
index 0000000..851f140
--- /dev/null
+++ b/c++/configure
@@ -0,0 +1,2308 @@
+#! /bin/sh
+
+# From configure.in Id: configure.in
+## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
+## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 40 AC_PROG_LIBTOOL
+
+
+
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+
+
+
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+
+
+# AC_CHECK_LIBM - check for math library
+
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+
+
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+ --enable-shared[=PKGS] build shared libraries [default=yes]"
+ac_help="$ac_help
+ --enable-static[=PKGS] build static libraries [default=yes]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
+ac_help="$ac_help
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --disable-libtool-lock avoid locking (might break parallel builds)"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ case "$ac_option" in
+ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) ac_optarg= ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case "$ac_option" in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir="$ac_optarg" ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build="$ac_optarg" ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file="$ac_optarg" ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir="$ac_optarg" ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ eval "enable_${ac_feature}=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix="$ac_optarg" ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he)
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+ --cache-file=FILE cache test results in FILE
+ --help print this message
+ --no-create do not create output files
+ --quiet, --silent do not print \`checking...' messages
+ --version print the version of autoconf that created configure
+Directory and file names:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [same as prefix]
+ --bindir=DIR user executables in DIR [EPREFIX/bin]
+ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+ --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data in DIR
+ [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data in DIR
+ [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+ --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+ --includedir=DIR C header files in DIR [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+ --infodir=DIR info documentation in DIR [PREFIX/info]
+ --mandir=DIR man documentation in DIR [PREFIX/man]
+ --srcdir=DIR find the sources in DIR [configure dir or ..]
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM
+ run sed PROGRAM on installed program names
+EOF
+ cat << EOF
+Host type:
+ --build=BUILD configure for building on BUILD [BUILD=HOST]
+ --host=HOST configure for HOST [guessed]
+ --target=TARGET configure for TARGET [TARGET=HOST]
+Features and packages:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --x-includes=DIR X include files are in DIR
+ --x-libraries=DIR X library files are in DIR
+EOF
+ if test -n "$ac_help"; then
+ echo "--enable and --with options recognized:$ac_help"
+ fi
+ exit 0 ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host="$ac_optarg" ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir="$ac_optarg" ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir="$ac_optarg" ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir="$ac_optarg" ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir="$ac_optarg" ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir="$ac_optarg" ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir="$ac_optarg" ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir="$ac_optarg" ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix="$ac_optarg" ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix="$ac_optarg" ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix="$ac_optarg" ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name="$ac_optarg" ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir="$ac_optarg" ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir="$ac_optarg" ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site="$ac_optarg" ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir="$ac_optarg" ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir="$ac_optarg" ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target="$ac_optarg" ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers)
+ echo "configure generated by autoconf version 2.13"
+ exit 0 ;;
+
+ -with-* | --with-*)
+ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_${ac_package}='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ eval "with_${ac_package}=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes="$ac_optarg" ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries="$ac_optarg" ;;
+
+ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ ;;
+
+ *)
+ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+ echo "configure: warning: $ac_option: invalid host type" 1>&2
+ fi
+ if test "x$nonopt" != xNONE; then
+ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+ fi
+ nonopt="$ac_option"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+ case "$ac_arg" in
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c) ;;
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=src/H5library.C
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_prog=$0
+ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ else
+ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ echo "loading site script $ac_site_file"
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+
+ac_aux_dir=
+for ac_dir in bin $srcdir/bin; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in bin $srcdir/bin" 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:661: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+
+
+echo $ac_n "checking shell variables initial values""... $ac_c" 1>&6
+echo "configure:684: checking shell variables initial values" >&5
+set >&5
+echo "$ac_t""done" 1>&6
+
+if test -x "/bin/pwd"; then
+ pwd=/bin/pwd
+else
+ pwd=pwd
+fi
+ ROOT=`$pwd`
+
+echo $ac_n "checking for cached host""... $ac_c" 1>&6
+echo "configure:696: checking for cached host" >&5
+if eval "test \"`echo '$''{'hdf5_cv_host'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ hdf5_cv_host="none"
+fi
+
+echo "$ac_t""$hdf5_cv_host" 1>&6;
+if test "X$hdf5_cv_host" = "Xnone"; then
+ hdf5_cv_host=$host
+elif test "$hdf5_cv_host" != "$host"; then
+ echo "The config.cache file was generated on $hdf5_cv_host but"
+ echo "this is $host. Please remove that file and try again."
+ { echo "configure: error: config.cache file is invalid" 1>&2; exit 1; }
+fi
+
+case "$host_os" in
+ aix4.*)
+ host_os_novers=aix4.x
+ ;;
+ freebsd*)
+ host_os_novers=freebsd
+ ;;
+ irix5.*)
+ host_os_novers=irix5.x
+ ;;
+ irix6.*)
+ host_os_novers=irix6.x
+ ;;
+ osf4.*)
+ host_os_novers=osf4.x
+ ;;
+ solaris2.*)
+ host_os_novers=solaris2.x
+ ;;
+ *)
+ host_os_novers=$host_os
+ ;;
+esac
+
+host_config="none"
+for f in $host_cpu-$host_vendor-$host_os \
+ $host_cpu-$host_vendor-$host_os_novers \
+ $host_vendor-$host_os \
+ $host_vendor-$host_os_novers \
+ $host_cpu-$host_os \
+ $host_cpu-$host_os_novers \
+ $host_cpu-$host_vendor \
+ $host_os \
+ $host_os_novers \
+ $host_vendor \
+ $host_cpu ; do
+ echo $ac_n "checking for config $f""... $ac_c" 1>&6
+echo "configure:749: checking for config $f" >&5
+ if test -f $srcdir/config/$f; then
+ host_config=$srcdir/config/$f
+ echo "$ac_t""found" 1>&6
+ break
+ fi
+ echo "$ac_t""no" 1>&6
+done
+if test "X$host_config" != "Xnone"; then
+ CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`"
+ . $host_config
+fi
+
+for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:767: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX="$ac_cv_prog_CXX"
+if test -n "$CXX"; then
+ echo "$ac_t""$CXX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CXX" && break
+done
+test -n "$CXX" || CXX="gcc"
+
+
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:799: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 810 "configure"
+#include "confdefs.h"
+
+int main(){return(0);}
+EOF
+if { (eval echo configure:815: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cxx_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cxx_cross=no
+ else
+ ac_cv_prog_cxx_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cxx_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
+if test $ac_cv_prog_cxx_works = no; then
+ { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:841: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
+echo "configure:846: checking whether we are using GNU C++" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.C <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:855: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gxx=yes
+else
+ ac_cv_prog_gxx=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gxx" 1>&6
+
+if test $ac_cv_prog_gxx = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+
+ac_test_CXXFLAGS="${CXXFLAGS+set}"
+ac_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS=
+echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
+echo "configure:874: checking whether ${CXX-g++} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.cc
+if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
+ ac_cv_prog_cxx_g=yes
+else
+ ac_cv_prog_cxx_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS="$ac_save_CXXFLAGS"
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+
+echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
+echo "configure:906: checking how to run the C++ preprocessor" >&5
+if test -z "$CXXCPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+ CXXCPP="${CXX-g++} -E"
+ cat > conftest.$ac_ext <<EOF
+#line 919 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:924: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CXXCPP=/lib/cpp
+fi
+rm -f conftest*
+ ac_cv_prog_CXXCPP="$CXXCPP"
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+fi
+fi
+CXXCPP="$ac_cv_prog_CXXCPP"
+echo "$ac_t""$CXXCPP" 1>&6
+ CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`"
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:949: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:987: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=yes
+fi
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=yes
+fi
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:1109: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1129: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1159: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1189: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1240: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1272: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 1283 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:1288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1314: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1319: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1347: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1390: checking for ld used by GCC" >&5
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1414: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1417: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ ac_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1452: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1468: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
+ else
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi
+fi
+
+NM="$ac_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1504: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$lt_target" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 1553 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:1575: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1580 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+if test -z "$AR"; then
+ for ac_prog in ar xar
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1695: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$AR" && break
+done
+test -n "$AR" || AR=":"
+
+fi
+
+
+if test -z "$SEARCH"; then
+ echo $ac_n "checking how make searches directories""... $ac_c" 1>&6
+echo "configure:1730: checking how make searches directories" >&5
+ while true; do #for break
+ cat >maketest <<EOF
+VPATH=$srcdir/config $srcdir/src $srcdir/bin
+.c.o:
+ cp $< H5.o
+
+foo: H5.o
+ /bin/rm -f H5.o
+ @echo works
+EOF
+
+ if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ SEARCH_RULE='VPATH='
+ SEARCH_SEP=' '
+ echo "$ac_t""VPATH=DIR1 DIR2 ..." 1>&6
+ break
+ fi
+
+ cat >maketest <<EOF
+VPATH=$srcdir/config:$srcdir/src:$srcdir/bin
+.c.o:
+ cp $< H5.o
+
+foo: H5.o
+ /bin/rm -f H5.o
+ @echo works
+EOF
+
+ if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ SEARCH_RULE='VPATH='
+ SEARCH_SEP=':'
+ echo "$ac_t""VPATH=DIR1:DIR2:..." 1>&6
+ break
+ fi
+
+ cat >maketest <<EOF
+.PATH: $srcdir/config $srcdir/src $srcdir/bin
+.c.o:
+ cp $< H5.o
+
+foo: H5.o
+ /bin/rm -f H5.o
+ @echo works
+EOF
+ if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ SEARCH_RULE='.PATH: '
+ SEARCH_SEP=' '
+ echo "$ac_t"".PATH: DIR1 DIR2 ..." 1>&6
+ break
+ fi
+
+ SEARCH_RULE='## SEARCH DISABLED: '
+ SEARCH_SEP=' '
+ echo "$ac_t""it doesn't" 1>&6
+ if test ! -f configure; then
+ { echo "configure: error: ${MAKE-make} requires the build and source directories to be the same" 1>&2; exit 1; }
+ fi
+ break
+ done
+ rm maketest
+fi
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+
+echo $ac_n "checking if $CXX can handle namespaces""... $ac_c" 1>&6
+echo "configure:1802: checking if $CXX can handle namespaces" >&5
+if test "$cross_compiling" = yes; then
+ { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1807 "configure"
+#include "confdefs.h"
+#ifdef __cplusplus
+extern "C" void exit(int);
+#endif
+
+using namespace std;
+
+namespace H5 {
+
+int main(void) { return 0; }
+
+}
+
+EOF
+if { (eval echo configure:1822: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+
+echo yes
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+
+echo no
+CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE"
+
+fi
+rm -fr conftest*
+fi
+
+
+echo $ac_n "checking if $CXX needs old style header files in includes""... $ac_c" 1>&6
+echo "configure:1841: checking if $CXX needs old style header files in includes" >&5
+if test "$cross_compiling" = yes; then
+ { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1846 "configure"
+#include "confdefs.h"
+#ifdef __cplusplus
+extern "C" void exit(int);
+#endif
+
+#include <iostream>
+
+int main(void) { return 0; }
+
+EOF
+if { (eval echo configure:1857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+
+echo no
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+
+echo yes
+CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME"
+
+fi
+rm -fr conftest*
+fi
+
+
+
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+echo $ac_n "checking make""... $ac_c" 1>&6
+echo "configure:1925: checking make" >&5
+
+if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\
+ sed -n 1p|cut -c1-8`" = "GNU Make"; then
+ echo "$ac_t""GNU make" 1>&6
+ GMAKE=yes
+ if test "X$GCC" = "Xyes"; then
+ DEPEND=config/depend1
+ else
+ DEPEND=config/depend2
+ fi
+else
+ echo "$ac_t""generic" 1>&6
+fi
+
+if test -z "$DEPEND"; then
+ echo $ac_n "checking how to include a makefile""... $ac_c" 1>&6
+echo "configure:1942: checking how to include a makefile" >&5
+
+ cat >makeinc <<EOF
+foo:
+ @:
+EOF
+
+ while true; do echo '.include <makeinc>' >maketest
+ if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ echo "$ac_t"".include <FILE>" 1>&6
+ DEPEND=config/depend3
+ break
+ fi
+
+ echo 'include makeinc' >maketest
+ if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ echo "$ac_t""include FILE" 1>&6
+ DEPEND=config/depend4
+ break;
+ fi
+
+ echo "$ac_t""you have a deficient make command" 1>&6
+ DEPEND=config/dependN
+ break
+ done
+ rm makeinc maketest
+fi
+
+rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files
+
+DYNAMIC_DIRS=""
+if test -n "$LDFLAGS"; then
+ for d in $LDFLAGS ; do
+ case "$d" in
+ -L*)
+ d=`echo $d | sed -e 's/-L//g'`
+ case "$d" in
+ .*)
+ d=${ROOT}/$d
+ ;;
+ esac
+ DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS"
+ ;;
+ esac
+ done
+fi
+
+
+ COMMENCE=config/commence
+ CONCLUDE=config/conclude
+
+if test -z "$SEARCH"; then
+ SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src'
+ cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"'
+ SEARCH="$SEARCH_RULE`eval $cmd`"
+fi
+
+if test "X$GMAKE" = "Xyes"; then
+ SETX=":"
+else
+ SETX="set -x"
+fi
+
+rm -rf conftest* confdefs* core core.* *.core dummy.o
+
+
+mkdir ./config >/dev/null 2>&1
+touch ./config/stamp1
+
+saved_no_create=$no_create
+no_create=yes
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+ case "\$ac_option" in
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+ -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
+ exit 0 ;;
+ -help | --help | --hel | --he | --h)
+ echo "\$ac_cs_usage"; exit 0 ;;
+ *) echo "\$ac_cs_usage"; exit 1 ;;
+ esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "config/depend1 config/depend2 config/depend3 config/depend4 \
+ config/dependN config/commence config/conclude Makefile \
+ src/Makefile test/Makefile examples/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@ROOT@%$ROOT%g
+s%@CXX@%$CXX%g
+s%@CXXCPP@%$CXXCPP%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@RANLIB@%$RANLIB%g
+s%@CC@%$CC%g
+s%@LN_S@%$LN_S%g
+s%@LIBTOOL@%$LIBTOOL%g
+s%@AR@%$AR%g
+/@DEPEND@/r $DEPEND
+s%@DEPEND@%%g
+s%@DYNAMIC_DIRS@%$DYNAMIC_DIRS%g
+/@COMMENCE@/r $COMMENCE
+s%@COMMENCE@%%g
+/@CONCLUDE@/r $CONCLUDE
+s%@CONCLUDE@%%g
+s%@SEARCH@%$SEARCH%g
+s%@SETX@%$SETX%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"config/depend1 config/depend2 config/depend3 config/depend4 \
+ config/dependN config/commence config/conclude Makefile \
+ src/Makefile test/Makefile examples/Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+ case "$ac_given_srcdir" in
+ .) srcdir=.
+ if test -z "$ac_dots"; then top_srcdir=.
+ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+ *) # Relative path.
+ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+ top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+
+ echo creating "$ac_file"
+ rm -f "$ac_file"
+ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+ case "$ac_file" in
+ *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+ *) ac_comsub= ;;
+ esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+no_create=$saved_no_create
+
+touch ./config/stamp2
+
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
diff --git a/c++/configure.in b/c++/configure.in
new file mode 100644
index 0000000..51f74e4
--- /dev/null
+++ b/c++/configure.in
@@ -0,0 +1,371 @@
+dnl ----------------------------------------------------------------------
+dnl Process this file with autoconf to produce configure.
+dnl
+dnl Copyright (C) 2000 National Center for Supercomputing Applications.
+dnl All rights reserved.
+dnl ----------------------------------------------------------------------
+
+dnl ----------------------------------------------------------------------
+dnl Initialize configure.
+dnl
+AC_REVISION($Id$)
+AC_INIT(src/H5library.C)
+dnl AC_CONFIG_HEADER(config.h)
+AC_CONFIG_AUX_DIR(bin)
+AC_CANONICAL_HOST
+AC_SUBST(CPPFLAGS)
+
+dnl ----------------------------------------------------------------------
+dnl Dump all shell variables values.
+dnl
+AC_MSG_CHECKING(shell variables initial values)
+set >&5
+AC_MSG_RESULT(done)
+
+dnl ----------------------------------------------------------------------
+dnl Where is the root of the source tree. Give an absolute address so
+dnl we can find it no matter which directory of the distribution is our
+dnl current directory. The built-in pwd fails on some systems, but the
+dnl /bin/pwd version works OK.
+dnl
+if test -x "/bin/pwd"; then
+ pwd=/bin/pwd
+else
+ pwd=pwd
+fi
+AC_SUBST(ROOT) ROOT=`$pwd`
+
+dnl ----------------------------------------------------------------------
+dnl Check that the cache file was build on the same host as what we're
+dnl running on now.
+dnl
+AC_CACHE_CHECK(for cached host,hdf5_cv_host,hdf5_cv_host="none");
+if test "X$hdf5_cv_host" = "Xnone"; then
+ hdf5_cv_host=$host
+elif test "$hdf5_cv_host" != "$host"; then
+ echo "The config.cache file was generated on $hdf5_cv_host but"
+ echo "this is $host. Please remove that file and try again."
+ AC_MSG_ERROR(config.cache file is invalid)
+fi
+
+dnl ----------------------------------------------------------------------
+dnl Source any special files that we need. These files normally aren't
+dnl present but can be used by the maintainers to fine tune things like
+dnl turning on debug or profiling flags for the compiler. The search order
+dnl is:
+dnl
+dnl CPU-VENDOR-OS
+dnl VENDOR-OS
+dnl CPU-OS
+dnl CPU-VENDOR
+dnl OS
+dnl VENDOR
+dnl CPU
+dnl
+dnl If the `OS' ends with a version number then remove it. For instance,
+dnl `freebsd3.1' would become `freebsd'
+case "$host_os" in
+ aix4.*)
+ host_os_novers=aix4.x
+ ;;
+ freebsd*)
+ host_os_novers=freebsd
+ ;;
+ irix5.*)
+ host_os_novers=irix5.x
+ ;;
+ irix6.*)
+ host_os_novers=irix6.x
+ ;;
+ osf4.*)
+ host_os_novers=osf4.x
+ ;;
+ solaris2.*)
+ host_os_novers=solaris2.x
+ ;;
+ *)
+ host_os_novers=$host_os
+ ;;
+esac
+
+host_config="none"
+for f in $host_cpu-$host_vendor-$host_os \
+ $host_cpu-$host_vendor-$host_os_novers \
+ $host_vendor-$host_os \
+ $host_vendor-$host_os_novers \
+ $host_cpu-$host_os \
+ $host_cpu-$host_os_novers \
+ $host_cpu-$host_vendor \
+ $host_os \
+ $host_os_novers \
+ $host_vendor \
+ $host_cpu ; do
+ AC_MSG_CHECKING(for config $f)
+ if test -f $srcdir/config/$f; then
+ host_config=$srcdir/config/$f
+ AC_MSG_RESULT(found)
+ break
+ fi
+ AC_MSG_RESULT(no)
+done
+if test "X$host_config" != "Xnone"; then
+ CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`"
+ . $host_config
+fi
+
+dnl ----------------------------------------------------------------------
+dnl Check for programs.
+dnl
+AC_PROG_CXX
+AC_PROG_CXXCPP dnl this is checked for when AC_HEADER_STDC is done
+CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`"
+AC_PROG_MAKE_SET
+AC_PROG_INSTALL
+AM_PROG_LIBTOOL
+
+if test -z "$AR"; then
+ AC_CHECK_PROGS(AR,ar xar,:,$PATH)
+fi
+AC_SUBST(AR)
+
+dnl ----------------------------------------------------------------------
+dnl Sometimes makes think the `.PATH:' appearing before the first rule
+dnl with an action should override the `all' default target. So we have
+dnl to decide what the proper syntax is.
+dnl
+if test -z "$SEARCH"; then
+ AC_MSG_CHECKING(how make searches directories)
+ while true; do #for break
+ dnl The most common method is `VPATH=DIR1 DIR2 ...'
+ cat >maketest <<EOF
+VPATH=$srcdir/config $srcdir/src $srcdir/bin
+.c.o:
+ cp $< H5.o
+
+foo: H5.o
+ /bin/rm -f H5.o
+ @echo works
+EOF
+
+ if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ SEARCH_RULE='VPATH='
+ SEARCH_SEP=' '
+ AC_MSG_RESULT([VPATH=DIR1 DIR2 ...])
+ break
+ fi
+
+ dnl The second most common method is like above except with the
+ dnl directories separated by colons.
+ cat >maketest <<EOF
+VPATH=$srcdir/config:$srcdir/src:$srcdir/bin
+.c.o:
+ cp $< H5.o
+
+foo: H5.o
+ /bin/rm -f H5.o
+ @echo works
+EOF
+
+ if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ SEARCH_RULE='VPATH='
+ SEARCH_SEP=':'
+ AC_MSG_RESULT([VPATH=DIR1:DIR2:...])
+ break
+ fi
+
+ dnl pmake uses the construct `.PATH: DIR1 DIR2
+ cat >maketest <<EOF
+.PATH: $srcdir/config $srcdir/src $srcdir/bin
+.c.o:
+ cp $< H5.o
+
+foo: H5.o
+ /bin/rm -f H5.o
+ @echo works
+EOF
+ if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ SEARCH_RULE='.PATH: '
+ SEARCH_SEP=' '
+ AC_MSG_RESULT([.PATH: DIR1 DIR2 ...])
+ break
+ fi
+
+ dnl No way for make to search directories
+ SEARCH_RULE='## SEARCH DISABLED: '
+ SEARCH_SEP=' '
+ AC_MSG_RESULT([it doesn't])
+ if test ! -f configure; then
+ AC_MSG_ERROR(${MAKE-make} requires the build and source directories to be the same)
+ fi
+ break
+ done
+ rm maketest
+fi
+
+dnl ----------------------------------------------------------------------
+dnl Checks for compiler characteristics.
+dnl
+AC_LANG_CPLUSPLUS
+
+AC_MSG_CHECKING(if $CXX can handle namespaces)
+AC_TRY_RUN([
+using namespace std;
+
+namespace H5 {
+
+int main(void) { return 0; }
+
+}
+], [
+echo yes
+], [
+echo no
+CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE"
+])
+
+AC_MSG_CHECKING(if $CXX needs old style header files in includes)
+AC_TRY_RUN([
+#include <iostream>
+
+int main(void) { return 0; }
+], [
+echo no
+], [
+echo yes
+CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME"
+])
+
+dnl ----------------------------------------------------------------------
+dnl Checks for header files.
+dnl
+
+dnl Checkpoint the cache
+AC_CACHE_SAVE
+
+AC_MSG_CHECKING(make)
+AC_SUBST_FILE(DEPEND)
+if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\
+ sed -n 1p|cut -c1-8`" = "GNU Make"; then
+ AC_MSG_RESULT(GNU make)
+ GMAKE=yes
+ if test "X$GCC" = "Xyes"; then
+ DEPEND=config/depend1
+ else
+ DEPEND=config/depend2
+ fi
+else
+ AC_MSG_RESULT(generic)
+fi
+
+dnl How do we include another file into a Makefile?
+if test -z "$DEPEND"; then
+ AC_MSG_CHECKING(how to include a makefile)
+
+ dnl The include file contains the target for `foo'
+ cat >makeinc <<EOF
+foo:
+ @:
+EOF
+
+ while true; do dnl for break
+ dnl pmake. We have to be careful because some pmake think that the
+ dnl contents of the MAKE environment variable is a target.
+ echo '.include <makeinc>' >maketest
+ if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ AC_MSG_RESULT([.include <FILE>])
+ DEPEND=config/depend3
+ break
+ fi
+
+ dnl Most make's use `include FILE'
+ echo 'include makeinc' >maketest
+ if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
+ AC_MSG_RESULT(include FILE)
+ DEPEND=config/depend4
+ break;
+ fi
+
+ dnl default
+ AC_MSG_RESULT(you have a deficient make command)
+ DEPEND=config/dependN
+ break
+ done
+ rm makeinc maketest
+fi
+
+dnl Some cleanup stuff
+rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files
+
+dnl ----------------------------------------------------------------------
+dnl Determine the runtime libraries we may need to include in the
+dnl libtools command so that executables will find the correct dynamic
+dnl libraries.
+dnl
+DYNAMIC_DIRS=""
+if test -n "$LDFLAGS"; then
+ for d in $LDFLAGS ; do
+ case "$d" in
+ -L*)
+ d=`echo $d | sed -e 's/-L//g'`
+ case "$d" in
+ .*)
+ dnl If the path isn't absolute, make it so by prepending the
+ dnl ROOT directory to it.
+ d=${ROOT}/$d
+ ;;
+ esac
+ DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS"
+ ;;
+ esac
+ done
+fi
+AC_SUBST(DYNAMIC_DIRS)
+
+dnl ----------------------------------------------------------------------
+dnl Build the Makefiles. Almost every Makefile.in will begin with the line
+dnl `@COMMENCE@' and end with the line `@CONCLUDE@'. These lines insert
+dnl various files from the config directory into the Makefile.
+dnl
+AC_SUBST_FILE(COMMENCE) COMMENCE=config/commence
+AC_SUBST_FILE(CONCLUDE) CONCLUDE=config/conclude
+
+dnl The directory search list
+if test -z "$SEARCH"; then
+ AC_SUBST(SEARCH) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src'
+ cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"'
+ SEARCH="$SEARCH_RULE`eval $cmd`"
+fi
+
+dnl We don't need to say when we're entering directories if we're using
+dnl GNU make becuase make does it for us.
+if test "X$GMAKE" = "Xyes"; then
+ AC_SUBST(SETX) SETX=":"
+else
+ AC_SUBST(SETX) SETX="set -x"
+fi
+
+dnl Some cleanup stuff
+rm -rf conftest* confdefs* core core.* *.core dummy.o
+
+dnl Build config.status, touch the stamp files, and build all the Makefiles.
+dnl The order is such that the first `make' does not need to update any
+dnl configuration information. See config/commence.in for the order in which
+dnl things need to be done.
+
+dnl First the stamp1 file for H5config.h.in
+mkdir ./config >/dev/null 2>&1
+touch ./config/stamp1
+
+dnl Then the config.status file (but not makefiles)
+saved_no_create=$no_create
+no_create=yes
+AC_OUTPUT(config/depend1 config/depend2 config/depend3 config/depend4 \
+ config/dependN config/commence config/conclude Makefile \
+ src/Makefile test/Makefile examples/Makefile)
+no_create=$saved_no_create
+
+dnl Then the stamp2 file for H5config.h
+touch ./config/stamp2
+
+dnl Finally the makefiles
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
generated by cgit v0.12 at 2024-11-10 13:21:48 (GMT)