diff options
| -rw-r--r-- | c++/config/sv1-cray | 126 | ||||
| -rw-r--r-- | c++/config/unicos10.0.X | 126 | ||||
| -rw-r--r-- | c++/config/unicosmk2.0.6.X | 126 |
3 files changed, 378 insertions, 0 deletions
diff --git a/c++/config/sv1-cray b/c++/config/sv1-cray new file mode 100644 index 0000000..ff225c2 --- /dev/null +++ b/c++/config/sv1-cray @@ -0,0 +1,126 @@ +# -*- shell-script -*- +# +# This file is part of the HDF5 build script. It is processed shortly +# after configure starts and defines, among other things, flags for +# the various compile modes. + + +#---------------------------------------------------------------------------- +# Compiler flags. The CPPFLAGS values should not include package debug +# flags like `-DH5G_DEBUG' since these are added with the +# `--enable-debug' switch of configure. +#---------------------------------------------------------------------------- + + +# Choosing a C++ Compiler +# ----------------------- +# +# The user should be able to specify the compiler by setting the CXX +# environment variable to the name of the compiler and any switches it +# requires for proper operation. If CXX is unset then this script may +# set it. If CXX is unset by time this script completes then configure +# will try `g++' and `CC' in that order (perhaps some others too). +# +# Note: Code later in this file may depend on the value of $CXX_BASENAME +# in order to distinguish between different compilers when +# deciding which compiler command-line switches to use. This +# variable is set based on the incoming value of $CC and is only +# used within this file. + +if test -z "$CXX"; then + CXX="CC" + CXX_BASENAME=CC +fi + + +# C++ Compiler and Preprocessor Flags +# ----------------------------------- +# +# Flags that end with `_CXXFLAGS' are always passed to the compiler. +# Flags that end with `_CPPFLAGS' are passed to the compiler when +# compiling but not when linking. +# +# DEBUG_CXXFLAGS Flags to pass to the compiler to create a +# DEBUG_CPPFLAGS library suitable for use with debugging +# tools. Usually this list will exclude +# optimization switches (like `-O') and include +# switches that turn on symbolic debugging +# support (like `-g'). +# +# PROD_CXXFLAGS Flags to pass to the compiler to create a +# PROD_CPPFLAGS production version of the library. These +# usualy exclude symbolic debugging switches +# (like `-g') and include optimization switches +# (like `-O'). +# +# PROFILE_CXXFLAGS Flags to pass to the compiler to create a +# PROFILE_CPPFLAGS library suitable for performance testing (like +# `-pg'). This may or may not include debugging +# or production flags. +# +# CXXFLAGS Flags can be added to this variable which +# might already be partially initialized. These +# flags will always be passed to the compiler +# and should include switches to turn on full +# warnings. HDF5 attempts to be ANSI and Posix +# compliant and employ good programming +# practices resulting in few if any +# warnings. +# +# Warning flags do not have to be added to CFLAGS +# variable if the compiler is the GNU gcc +# compiler or a descendent of gcc such as EGCS or PGCC. +# +# The CFLAGS should contains *something* or else +# configure will probably add `-g'. For most +# systems this isn't a problem but some systems +# will disable optimizations in favor of the +# `-g'. +# +# +# These flags should be set according to the compiler being used. +# There are two ways to check the compiler. You can try using `-v' or +# `--version' to see if the compiler will print a version string. You +# can use the value of $CXX_BASENAME which is the base name of the +# first word in $CXX (note that the value of CXX may have changed +# above). + +case $CXX_BASENAME in + g++) + CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CXXFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CXXFLAGS="$CXXFLAGS -h instantiate=used" + DEBUG_CXXFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; +esac + + + +# Overriding Configure Tests +# -------------------------- +# +# Values for overriding configuration tests when cross compiling. +# This includes compiling on some machines where the serial front end +# compiles for a parallel back end. + +# Set this to `yes' or `no' depending on whether the target is big +# endian or little endian. +#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} + +# Set this to the width required by printf() to print type `long +# long'. For instance, if the format would be `%lld' then set it to +# `ll' or if the format would be `%qd' set it to `q'. +#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} diff --git a/c++/config/unicos10.0.X b/c++/config/unicos10.0.X new file mode 100644 index 0000000..ff225c2 --- /dev/null +++ b/c++/config/unicos10.0.X @@ -0,0 +1,126 @@ +# -*- shell-script -*- +# +# This file is part of the HDF5 build script. It is processed shortly +# after configure starts and defines, among other things, flags for +# the various compile modes. + + +#---------------------------------------------------------------------------- +# Compiler flags. The CPPFLAGS values should not include package debug +# flags like `-DH5G_DEBUG' since these are added with the +# `--enable-debug' switch of configure. +#---------------------------------------------------------------------------- + + +# Choosing a C++ Compiler +# ----------------------- +# +# The user should be able to specify the compiler by setting the CXX +# environment variable to the name of the compiler and any switches it +# requires for proper operation. If CXX is unset then this script may +# set it. If CXX is unset by time this script completes then configure +# will try `g++' and `CC' in that order (perhaps some others too). +# +# Note: Code later in this file may depend on the value of $CXX_BASENAME +# in order to distinguish between different compilers when +# deciding which compiler command-line switches to use. This +# variable is set based on the incoming value of $CC and is only +# used within this file. + +if test -z "$CXX"; then + CXX="CC" + CXX_BASENAME=CC +fi + + +# C++ Compiler and Preprocessor Flags +# ----------------------------------- +# +# Flags that end with `_CXXFLAGS' are always passed to the compiler. +# Flags that end with `_CPPFLAGS' are passed to the compiler when +# compiling but not when linking. +# +# DEBUG_CXXFLAGS Flags to pass to the compiler to create a +# DEBUG_CPPFLAGS library suitable for use with debugging +# tools. Usually this list will exclude +# optimization switches (like `-O') and include +# switches that turn on symbolic debugging +# support (like `-g'). +# +# PROD_CXXFLAGS Flags to pass to the compiler to create a +# PROD_CPPFLAGS production version of the library. These +# usualy exclude symbolic debugging switches +# (like `-g') and include optimization switches +# (like `-O'). +# +# PROFILE_CXXFLAGS Flags to pass to the compiler to create a +# PROFILE_CPPFLAGS library suitable for performance testing (like +# `-pg'). This may or may not include debugging +# or production flags. +# +# CXXFLAGS Flags can be added to this variable which +# might already be partially initialized. These +# flags will always be passed to the compiler +# and should include switches to turn on full +# warnings. HDF5 attempts to be ANSI and Posix +# compliant and employ good programming +# practices resulting in few if any +# warnings. +# +# Warning flags do not have to be added to CFLAGS +# variable if the compiler is the GNU gcc +# compiler or a descendent of gcc such as EGCS or PGCC. +# +# The CFLAGS should contains *something* or else +# configure will probably add `-g'. For most +# systems this isn't a problem but some systems +# will disable optimizations in favor of the +# `-g'. +# +# +# These flags should be set according to the compiler being used. +# There are two ways to check the compiler. You can try using `-v' or +# `--version' to see if the compiler will print a version string. You +# can use the value of $CXX_BASENAME which is the base name of the +# first word in $CXX (note that the value of CXX may have changed +# above). + +case $CXX_BASENAME in + g++) + CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CXXFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CXXFLAGS="$CXXFLAGS -h instantiate=used" + DEBUG_CXXFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; +esac + + + +# Overriding Configure Tests +# -------------------------- +# +# Values for overriding configuration tests when cross compiling. +# This includes compiling on some machines where the serial front end +# compiles for a parallel back end. + +# Set this to `yes' or `no' depending on whether the target is big +# endian or little endian. +#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} + +# Set this to the width required by printf() to print type `long +# long'. For instance, if the format would be `%lld' then set it to +# `ll' or if the format would be `%qd' set it to `q'. +#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} diff --git a/c++/config/unicosmk2.0.6.X b/c++/config/unicosmk2.0.6.X new file mode 100644 index 0000000..ff225c2 --- /dev/null +++ b/c++/config/unicosmk2.0.6.X @@ -0,0 +1,126 @@ +# -*- shell-script -*- +# +# This file is part of the HDF5 build script. It is processed shortly +# after configure starts and defines, among other things, flags for +# the various compile modes. + + +#---------------------------------------------------------------------------- +# Compiler flags. The CPPFLAGS values should not include package debug +# flags like `-DH5G_DEBUG' since these are added with the +# `--enable-debug' switch of configure. +#---------------------------------------------------------------------------- + + +# Choosing a C++ Compiler +# ----------------------- +# +# The user should be able to specify the compiler by setting the CXX +# environment variable to the name of the compiler and any switches it +# requires for proper operation. If CXX is unset then this script may +# set it. If CXX is unset by time this script completes then configure +# will try `g++' and `CC' in that order (perhaps some others too). +# +# Note: Code later in this file may depend on the value of $CXX_BASENAME +# in order to distinguish between different compilers when +# deciding which compiler command-line switches to use. This +# variable is set based on the incoming value of $CC and is only +# used within this file. + +if test -z "$CXX"; then + CXX="CC" + CXX_BASENAME=CC +fi + + +# C++ Compiler and Preprocessor Flags +# ----------------------------------- +# +# Flags that end with `_CXXFLAGS' are always passed to the compiler. +# Flags that end with `_CPPFLAGS' are passed to the compiler when +# compiling but not when linking. +# +# DEBUG_CXXFLAGS Flags to pass to the compiler to create a +# DEBUG_CPPFLAGS library suitable for use with debugging +# tools. Usually this list will exclude +# optimization switches (like `-O') and include +# switches that turn on symbolic debugging +# support (like `-g'). +# +# PROD_CXXFLAGS Flags to pass to the compiler to create a +# PROD_CPPFLAGS production version of the library. These +# usualy exclude symbolic debugging switches +# (like `-g') and include optimization switches +# (like `-O'). +# +# PROFILE_CXXFLAGS Flags to pass to the compiler to create a +# PROFILE_CPPFLAGS library suitable for performance testing (like +# `-pg'). This may or may not include debugging +# or production flags. +# +# CXXFLAGS Flags can be added to this variable which +# might already be partially initialized. These +# flags will always be passed to the compiler +# and should include switches to turn on full +# warnings. HDF5 attempts to be ANSI and Posix +# compliant and employ good programming +# practices resulting in few if any +# warnings. +# +# Warning flags do not have to be added to CFLAGS +# variable if the compiler is the GNU gcc +# compiler or a descendent of gcc such as EGCS or PGCC. +# +# The CFLAGS should contains *something* or else +# configure will probably add `-g'. For most +# systems this isn't a problem but some systems +# will disable optimizations in favor of the +# `-g'. +# +# +# These flags should be set according to the compiler being used. +# There are two ways to check the compiler. You can try using `-v' or +# `--version' to see if the compiler will print a version string. You +# can use the value of $CXX_BASENAME which is the base name of the +# first word in $CXX (note that the value of CXX may have changed +# above). + +case $CXX_BASENAME in + g++) + CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CXXFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CXXFLAGS="$CXXFLAGS -h instantiate=used" + DEBUG_CXXFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; +esac + + + +# Overriding Configure Tests +# -------------------------- +# +# Values for overriding configuration tests when cross compiling. +# This includes compiling on some machines where the serial front end +# compiles for a parallel back end. + +# Set this to `yes' or `no' depending on whether the target is big +# endian or little endian. +#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} + +# Set this to the width required by printf() to print type `long +# long'. For instance, if the format would be `%lld' then set it to +# `ll' or if the format would be `%qd' set it to `q'. +#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} |