diff options
36 files changed, 570 insertions, 214 deletions
diff --git a/c++/Makefile.in b/c++/Makefile.in index e774512..9e8302b 100644 --- a/c++/Makefile.in +++ b/c++/Makefile.in @@ -669,13 +669,14 @@ installcheck-local: # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -683,6 +684,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in index 3a40616..6e54d86 100644 --- a/c++/examples/Makefile.in +++ b/c++/examples/Makefile.in @@ -582,13 +582,14 @@ h5group: $(srcdir)/h5group.cpp # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -596,6 +597,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in index 7f27c8a..2cd4718 100644 --- a/c++/src/Makefile.in +++ b/c++/src/Makefile.in @@ -763,13 +763,14 @@ mostlyclean-local: # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -777,6 +778,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in index 79ae53f..41fa310 100644 --- a/c++/test/Makefile.in +++ b/c++/test/Makefile.in @@ -653,13 +653,14 @@ mostlyclean-local: # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -667,6 +668,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/config/conclude.am b/config/conclude.am index 479de46..dafea77 100644 --- a/config/conclude.am +++ b/config/conclude.am @@ -28,13 +28,14 @@ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -42,6 +43,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/examples/Makefile.in b/examples/Makefile.in index 6465ef9..084ac5c 100644 --- a/examples/Makefile.in +++ b/examples/Makefile.in @@ -592,13 +592,14 @@ h5_dtransform: $(srcdir)/h5_dtransform.c # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -606,6 +607,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/fortran/Makefile.in b/fortran/Makefile.in index 2016943..3a9c4fc 100644 --- a/fortran/Makefile.in +++ b/fortran/Makefile.in @@ -678,13 +678,14 @@ installcheck-local: # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -692,6 +693,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in index e774fcb..cb78035 100644 --- a/fortran/examples/Makefile.in +++ b/fortran/examples/Makefile.in @@ -600,13 +600,14 @@ ph5example: ph5example.f90 # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -614,6 +615,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/fortran/src/Makefile.am b/fortran/src/Makefile.am index 266186f..52854a3 100644 --- a/fortran/src/Makefile.am +++ b/fortran/src/Makefile.am @@ -22,7 +22,7 @@ include $(top_srcdir)/config/commence.am # Include src directory in both Fortran and C flags (C compiler is used # for linking). INCLUDES = -I$(top_srcdir)/src -AM_FCFLAGS=-I$(top_srcdir)/src -I$(top_srcdir)/src/fortran +AM_FCFLAGS=-I$(top_srcdir)/src -I$(top_srcdir)/fortran/src AM_FCLIBS=$(LIBHDF5) @@ -144,7 +144,7 @@ H5fortran_detect.f90: H5test_kind$(EXEEXT) # H5test_kind.f90 is included in the distribution, and Automake knows # how to compile a fortran program given its sources. -H5test_kind_SOURCES = H5test_kind.f90 +H5test_kind_SOURCES = $(srcdir)/H5test_kind.f90 # Mark this directory as part of the Fortran API HDF_FORTRAN=yes diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in index 5a34175..0578ca1 100644 --- a/fortran/src/Makefile.in +++ b/fortran/src/Makefile.in @@ -373,7 +373,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog # Include src directory in both Fortran and C flags (C compiler is used # for linking). INCLUDES = -I$(top_srcdir)/src -AM_FCFLAGS = -I$(top_srcdir)/src -I$(top_srcdir)/src/fortran +AM_FCFLAGS = -I$(top_srcdir)/src -I$(top_srcdir)/fortran/src AM_FCLIBS = $(LIBHDF5) # This is our main target, the fortran library @@ -429,7 +429,7 @@ H5fortran_detect_SOURCES = H5fortran_detect.f90 # H5test_kind.f90 is included in the distribution, and Automake knows # how to compile a fortran program given its sources. -H5test_kind_SOURCES = H5test_kind.f90 +H5test_kind_SOURCES = $(srcdir)/H5test_kind.f90 # Mark this directory as part of the Fortran API HDF_FORTRAN = yes @@ -586,6 +586,12 @@ distclean-compile: .f90.lo: $(LTFCCOMPILE) -c -o $@ $< +H5test_kind.o: $(srcdir)/H5test_kind.f90 + $(FC) $(AM_FCFLAGS) $(FCFLAGS) -c -o H5test_kind.o `test -f '$(srcdir)/H5test_kind.f90' || echo '$(srcdir)/'`$(srcdir)/H5test_kind.f90 + +H5test_kind.obj: $(srcdir)/H5test_kind.f90 + $(FC) $(AM_FCFLAGS) $(FCFLAGS) -c -o H5test_kind.obj `if test -f '$(srcdir)/H5test_kind.f90'; then $(CYGPATH_W) '$(srcdir)/H5test_kind.f90'; else $(CYGPATH_W) '$(srcdir)/$(srcdir)/H5test_kind.f90'; fi` + mostlyclean-libtool: -rm -f *.lo @@ -886,13 +892,14 @@ HDF5mpio.lo: $(srcdir)/H5FDmpioff.f90 H5f90global.lo H5Aff.lo \ # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -900,6 +907,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in index 7b3ade1..e8b8093 100644 --- a/fortran/test/Makefile.in +++ b/fortran/test/Makefile.in @@ -825,13 +825,14 @@ fflush2.chkexe_: fflush1.chkexe_ # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -839,6 +840,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in index e9df849..3301d1f 100644 --- a/fortran/testpar/Makefile.in +++ b/fortran/testpar/Makefile.in @@ -620,13 +620,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -634,6 +635,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/Makefile.in b/hl/Makefile.in index 3809deb..005019d 100755 --- a/hl/Makefile.in +++ b/hl/Makefile.in @@ -664,13 +664,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -678,6 +679,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in index 6f9983d..3042d0e 100644 --- a/hl/c++/Makefile.in +++ b/hl/c++/Makefile.in @@ -658,13 +658,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -672,6 +673,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in index 9ca6844..ecb35ad 100644 --- a/hl/c++/src/Makefile.in +++ b/hl/c++/src/Makefile.in @@ -677,13 +677,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -691,6 +692,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in index 318cd10..e61a284 100644 --- a/hl/c++/test/Makefile.in +++ b/hl/c++/test/Makefile.in @@ -627,13 +627,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -641,6 +642,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in index 1ed7f2a..d39eb79 100644 --- a/hl/fortran/Makefile.in +++ b/hl/fortran/Makefile.in @@ -662,13 +662,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -676,6 +677,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in index 1fd0bda..5f23b40 100644 --- a/hl/fortran/src/Makefile.in +++ b/hl/fortran/src/Makefile.in @@ -711,13 +711,14 @@ H5TBff.lo: $(srcdir)/H5TBff.f90 # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -725,6 +726,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in index e44d33b..2153462 100644 --- a/hl/fortran/test/Makefile.in +++ b/hl/fortran/test/Makefile.in @@ -630,13 +630,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -644,6 +645,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in index f01dbd8..dd9f4d8 100644 --- a/hl/src/Makefile.in +++ b/hl/src/Makefile.in @@ -680,13 +680,14 @@ distclean-compile: # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -694,6 +695,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in index 3b21ba2..7836aae 100644 --- a/hl/test/Makefile.in +++ b/hl/test/Makefile.in @@ -662,13 +662,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -676,6 +677,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in index 1843e51..20190f3 100644 --- a/hl/tools/gif2h5/Makefile.in +++ b/hl/tools/gif2h5/Makefile.in @@ -661,13 +661,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -675,6 +676,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/perform/Makefile.in b/perform/Makefile.in index 6f426e6..3031c54 100644 --- a/perform/Makefile.in +++ b/perform/Makefile.in @@ -747,13 +747,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -761,6 +762,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/src/Makefile.in b/src/Makefile.in index f694f38..c802bfb 100644 --- a/src/Makefile.in +++ b/src/Makefile.in @@ -1018,13 +1018,14 @@ trace: $(libhdf5_la_SOURCES) # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -1032,6 +1033,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/test/Makefile.in b/test/Makefile.in index b15299e..b89a04a 100644 --- a/test/Makefile.in +++ b/test/Makefile.in @@ -1206,13 +1206,14 @@ flush2.chkexe_: flush1.chkexe_ # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -1220,6 +1221,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/testpar/Makefile.in b/testpar/Makefile.in index 9c763cb..11dfc0e 100644 --- a/testpar/Makefile.in +++ b/testpar/Makefile.in @@ -658,13 +658,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -672,6 +673,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/Makefile.in b/tools/Makefile.in index aebc030..d7962e7 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -660,13 +660,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -674,6 +675,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/gifconv/Makefile.in b/tools/gifconv/Makefile.in index 1843e51..20190f3 100644 --- a/tools/gifconv/Makefile.in +++ b/tools/gifconv/Makefile.in @@ -661,13 +661,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -675,6 +676,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in index 775c764..168fbaf 100644 --- a/tools/h5diff/Makefile.in +++ b/tools/h5diff/Makefile.in @@ -701,13 +701,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -715,6 +716,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in index bab5765..a0bc999 100644 --- a/tools/h5dump/Makefile.in +++ b/tools/h5dump/Makefile.in @@ -676,13 +676,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -690,6 +691,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in index 163bcae..1ca807b 100755 --- a/tools/h5import/Makefile.in +++ b/tools/h5import/Makefile.in @@ -669,13 +669,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -683,6 +684,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in index 3945184..c513703 100644 --- a/tools/h5jam/Makefile.in +++ b/tools/h5jam/Makefile.in @@ -696,13 +696,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -710,6 +711,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in index c274c82..59e1d24 100644 --- a/tools/h5ls/Makefile.in +++ b/tools/h5ls/Makefile.in @@ -649,13 +649,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -663,6 +664,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in index 7a99891..9f20870 100644 --- a/tools/h5repack/Makefile.in +++ b/tools/h5repack/Makefile.in @@ -726,13 +726,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -740,6 +741,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in index 8900ad3..b01a6e2 100644 --- a/tools/lib/Makefile.in +++ b/tools/lib/Makefile.in @@ -659,13 +659,14 @@ check-install: installcheck # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -673,6 +674,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in index ab4fa2b..806d8e2 100644 --- a/tools/misc/Makefile.in +++ b/tools/misc/Makefile.in @@ -754,13 +754,14 @@ h5redeploy: h5redeploy.in # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., Fortran type detection) -build-lib: $(BUILT_SOURCES) $(LIB) -build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS) -build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS) +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) -lib progs tests check-s check-p check-clean :: +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ @@ -768,6 +769,15 @@ lib progs tests check-s check-p check-clean :: fi; \ done +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. |