diff options
| -rw-r--r-- | aclocal.m4 | 323 |
1 files changed, 249 insertions, 74 deletions
@@ -1,6 +1,6 @@ ## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*- -## Copyright (C) 1996-1998 Free Software Foundation, Inc. -## Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc. +## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by @@ -21,32 +21,75 @@ ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. -# serial 24 AM_PROG_LIBTOOL -AC_DEFUN(AM_PROG_LIBTOOL, -[AC_REQUIRE([AM_ENABLE_SHARED])dnl -AC_REQUIRE([AM_ENABLE_STATIC])dnl +# serial 40 AC_PROG_LIBTOOL +AC_DEFUN(AC_PROG_LIBTOOL, +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl + +# Save cache, so that ltconfig can load it +AC_CACHE_SAVE + +# Actually configure libtool. ac_aux_dir is where install-sh is found. +CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ +LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ +DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ +|| AC_MSG_ERROR([libtool configure failed]) + +# Reload cache, that may have been modified by ltconfig +AC_CACHE_LOAD + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +# Redirect the config.log output again, so that the ltconfig log is not +# clobbered by the next message. +exec 5>>./config.log +]) + +AC_DEFUN(AC_LIBTOOL_SETUP, +[AC_PREREQ(2.13)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AM_PROG_LD])dnl -AC_REQUIRE([AM_PROG_NM])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl + +case "$target" in +NONE) lt_target="$host" ;; +*) lt_target="$target" ;; +esac # Check for any special flags to pass to ltconfig. -libtool_flags= +libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$silent" = yes && libtool_flags="$libtool_flags --silent" +test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" +ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], +[libtool_flags="$libtool_flags --enable-dlopen"]) +ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], +[libtool_flags="$libtool_flags --enable-win32-dll"]) +AC_ARG_ENABLE(libtool-lock, + [ --disable-libtool-lock avoid locking (might break parallel builds)]) +test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" +test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$host" in +case "$lt_target" in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext @@ -68,30 +111,42 @@ case "$host" in *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi ;; -esac -# Actually configure libtool. ac_aux_dir is where install-sh is found. -AR="$AR" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ -|| AC_MSG_ERROR([libtool configure failed]) +ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; ]) +esac +]) + +# AC_LIBTOOL_DLOPEN - enable checks for dlopen support +AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) + +# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's +AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) -# AM_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AM_ENABLE_SHARED[(DEFAULT)] +# AC_ENABLE_SHARED - implement the --enable-shared flag +# Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AM_ENABLE_SHARED, -[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_SHARED, [dnl +define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl -<< --enable-shared build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT] +<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl -[ --enable-shared=PKGS only build shared libraries if the current package - appears as an element in the PKGS list], [p=${PACKAGE-default} case "$enableval" in yes) enable_shared=yes ;; @@ -108,29 +163,23 @@ no) enable_shared=no ;; IFS="$ac_save_ifs" ;; esac], -enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl +enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) -# AM_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AM_DISABLE_SHARED, -[AM_ENABLE_SHARED(no)]) +# AC_DISABLE_SHARED - set the default shared flag to --disable-shared +AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no)]) -# AM_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AM_DISABLE_STATIC, -[AM_ENABLE_STATIC(no)]) - -# AM_ENABLE_STATIC - implement the --enable-static flag -# Usage: AM_ENABLE_STATIC[(DEFAULT)] +# AC_ENABLE_STATIC - implement the --enable-static flag +# Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AM_ENABLE_STATIC, -[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_STATIC, [dnl +define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl -<< --enable-static build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT] +<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl -[ --enable-static=PKGS only build shared libraries if the current package - appears as an element in the PKGS list], [p=${PACKAGE-default} case "$enableval" in yes) enable_static=yes ;; @@ -147,26 +196,73 @@ no) enable_static=no ;; IFS="$ac_save_ifs" ;; esac], -enable_static=AM_ENABLE_STATIC_DEFAULT)dnl +enable_static=AC_ENABLE_STATIC_DEFAULT)dnl +]) + +# AC_DISABLE_STATIC - set the default static flag to --disable-static +AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no)]) + + +# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag +# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl +define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(fast-install, +changequote(<<, >>)dnl +<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], +changequote([, ])dnl +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) +# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install +AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no)]) -# AM_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AM_PROG_LD, +# AC_PROG_LD - find the path to the GNU or non-GNU linker +AC_DEFUN(AC_PROG_LD, [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC]) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in - # Accept absolute paths. - /* | [A-Za-z]:\\*) - test -z "$LD" && LD="$ac_prog" - ;; + # Accept absolute paths. +changequote(,)dnl + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' +changequote([,])dnl + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld @@ -183,10 +279,10 @@ else fi AC_CACHE_VAL(ac_cv_path_LD, [if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog"; then + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ac_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. @@ -194,7 +290,7 @@ AC_CACHE_VAL(ac_cv_path_LD, if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else - test "$with_gnu_ld" != yes && break + test "$with_gnu_ld" != yes && break fi fi done @@ -209,11 +305,10 @@ else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_SUBST(LD) -AM_PROG_LD_GNU +AC_PROG_LD_GNU ]) -AC_DEFUN(AM_PROG_LD_GNU, +AC_DEFUN(AC_PROG_LD_GNU, [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then @@ -223,37 +318,117 @@ else fi]) ]) -# AM_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AM_PROG_NM, +# AC_PROG_NM - find the path to a BSD-compatible name lister +AC_DEFUN(AC_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, -[case "$NM" in -/* | [A-Za-z]:\\*) - ac_cv_path_NM="$NM" # Let the user override the test with a path. - ;; -*) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do +[if test -n "$NM"; then + # Let the user override the test. + ac_cv_path_NM="$NM" +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm; then + if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" + ac_cv_path_NM="$ac_dir/nm -B" + break elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + ac_cv_path_NM="$ac_dir/nm -p" + break else - ac_cv_path_NM="$ac_dir/nm" + ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags fi - break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm - ;; -esac]) +fi]) NM="$ac_cv_path_NM" AC_MSG_RESULT([$NM]) -AC_SUBST(NM) ]) + +# AC_CHECK_LIBM - check for math library +AC_DEFUN(AC_CHECK_LIBM, +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case "$lt_target" in +*-*-beos* | *-*-cygwin*) + # These system don't have libm + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, main, LIBM="-lm") + ;; +esac +]) + +# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for +# the libltdl convenience library and INCLTDL to the include flags for +# the libltdl header and adds --enable-ltdl-convenience to the +# configure arguments. Note that LIBLTDL and INCLTDL are not +# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not +# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed +# with '${top_builddir}/' and INCLTDL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case "$enable_ltdl_convenience" in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +]) + +# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for +# the libltdl installable library and INCLTDL to the include flags for +# the libltdl header and adds --enable-ltdl-install to the configure +# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is +# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed +# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed +# with '${top_srcdir}/' (note the single quotes!). If your package is +# not flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, main, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + INCLTDL= + fi +]) + +dnl old names +AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl +AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl +AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl +AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl +AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl +AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl +AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl + +dnl This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL])dnl |