summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--INSTALL24
-rw-r--r--Makefile.in109
-rw-r--r--README2
-rw-r--r--config/commence.in112
-rw-r--r--config/conclude.in78
-rw-r--r--config/depend.in42
-rw-r--r--examples/Makefile.in31
-rw-r--r--pablo/Makefile.in125
-rw-r--r--src/Makefile.in29
-rw-r--r--test/Makefile.in51
-rw-r--r--testpar/Makefile.in27
-rw-r--r--tools/Makefile.in37
12 files changed, 350 insertions, 317 deletions
diff --git a/INSTALL b/INSTALL
index be3862e..4b4d3b8 100644
--- a/INSTALL
+++ b/INSTALL
@@ -96,6 +96,30 @@ INSTALL.ascired for instructions.
*** Bzip'd tar archive (*.tar.bz2)
$ bunzip2 <hdf5-1.2.0.tar.gz |tar xf -
+** Source vs. Build Directories
+ On most systems the build can occur in a directory other than
+ the source directory, allowing multiple concurrent builds
+ and/or read-only source code. In order to accomplish this, one
+ should create a build directory, cd into that directory, and
+ run the `configure' script found in the source directory
+ (configure details are below).
+
+ Unfortunately, this does not work on recent Irix platforms
+ (6.5? and later) because that `make' doesn't understand the
+ VPATH variable. However, hdf5 also supports Irix `pmake' which
+ has a .PATH target which serves a similar purpose. Here's what
+ the man pages say about VPATH, which is the facility used by
+ HDF5 makefiles for this feature:
+
+ The VPATH facility is a derivation of the undocumented
+ VPATH feature in the System V Release 3 version of make.
+ System V Release 4 has a new VPATH implementation, much
+ like the pmake(1) .PATH feature. This new feature is also
+ undocumented in the standard System V Release 4 manual
+ pages. For this reason it is not available in the IRIX
+ version of make. The VPATH facility should not be used
+ with the new parallel make option.
+
** Configuring
HDF5 uses the GNU autoconf system for configuration, which
detects various features of the host system and creates the
diff --git a/Makefile.in b/Makefile.in
index a6079fa..c696704 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,71 +1,62 @@
-# Top-level HDF5 Makefile(.in)
-#
-# Copyright (C) 1997 National Center for Supercomputing Applications.
-# All rights reserved.
-#
-#
-# This makefile mostly just reinvokes make in the various subdirectories
-# but does so in the correct order. You can alternatively invoke make from
-# each subdirectory manually.
-#
+## Top-level HDF5 Makefile(.in)
+##
+## Copyright (C) 1997 National Center for Supercomputing Applications.
+## All rights reserved.
+##
+##
+## This makefile mostly just reinvokes make in the various subdirectories
+## but does so in the correct order. You can alternatively invoke make from
+## each subdirectory manually.
+##
top_srcdir=@top_srcdir@
top_builddir=.
srcdir=@srcdir@
VPATH=.:@srcdir@
+.PATH: . @srcdir@
@COMMENCE@
# Subdirectories in build-order (not including `examples')
SUBDIRS=src test tools @TESTPARALLEL@
##############################################################################
-# T A R G E T S
-#
-# all: Build libraries, header files, tests, and programs in the
-# various subdirectories but does not run tests or install the
-# library, header files, or programs. The components can be
-# built individually with the targets lib, progs, and tests.
-#
-# check: Test the uninstalled library to make sure it works. You may
-# also say `test' or `_test' (`test' doesn't work from the top
-# level directory for some versions of make because `test' is
-# also a directory).
-#
-# install: Installs libraries, header files, programs, and documentation
-# in the various directories under the prefix directory (lib,
-# include, bin, man, info). Use the `--prefix=PATH' option
-# to `configure' (or `config.status') or say `--help' for
-# other alternatives. The default prefix is `/usr/local'.
-#
-# uninstall: Delete all the installed files that the `install' target
-# created (but not the noninstalled files such as `make all'
-# created).
-#
-# clean: Removes temporary files except those that record the
-# configuration and those that are part of the distribution.
-#
-# mostlyclean: Like `clean' except it doesn't delete a few files like
-# libraries, programs, and/or generated header files because
-# regenerating them is rarely necessary and takes a lot of time.
-#
-# distclean: Deletes all files that are created by configuring or building
-# HDF5. If you have unpacked the source and built HDF5 without
-# creating any other files, then `make distclean' will leave
-# only the files that were in the distrubution.
-#
-# maintainer-clean:
-# Like `distclean' except it deletes more files. It deletes
-# all generated files. This target is not intended for normal
-# users; it deletes files that may require special tools to
-# rebuild.
-#
-# TAGS: Updates the tags table for this program.
-#
-# dep depend: Builds dependencies in all subdirectories. These targets
-# might not be available on certain combinations of make
-# programs and C compilers. At the other extreme, the GNU
-# make used in combination with gcc will maintain dependency
-# information automatically.
-#
+## T A R G E T S
+##
+## all: Build libraries, header files, tests, and programs in the
+## various subdirectories but does not run tests or install the
+## library, header files, or programs. The components can be
+## built individually with the targets lib, progs, and tests.
+## check: Test the uninstalled library to make sure it works. You may
+## also say `test' or `_test' (`test' doesn't work from the top
+## level directory for some versions of make because `test' is
+## also a directory).
+## install: Installs libraries, header files, programs, and documentation
+## in the various directories under the prefix directory (lib,
+## include, bin, man, info). Use the `--prefix=PATH' option
+## to `configure' (or `config.status') or say `--help' for
+## other alternatives. The default prefix is `/usr/local'.
+## uninstall: Delete all the installed files that the `install' target
+## created (but not the noninstalled files such as `make all'
+## created).
+## clean: Removes temporary files except those that record the
+## configuration and those that are part of the distribution.
+## mostlyclean: Like `clean' except it doesn't delete a few files like
+## libraries, programs, and/or generated header files because
+## regenerating them is rarely necessary and takes a lot of time.
+## distclean: Deletes all files that are created by configuring or building
+## HDF5. If you have unpacked the source and built HDF5 without
+## creating any other files, then `make distclean' will leave
+## only the files that were in the distrubution.
+## maintainer-clean:
+## Like `distclean' except it deletes more files. It deletes
+## all generated files. This target is not intended for normal
+## users; it deletes files that may require special tools to
+## rebuild.
+## TAGS: Updates the tags table for this program.
+## dep depend: Builds dependencies in all subdirectories. These targets
+## might not be available on certain combinations of make
+## programs and C compilers. At the other extreme, the GNU
+## make used in combination with gcc will maintain dependency
+## information automatically.
lib progs check test _test uninstall:
@@SETX@; for d in $(SUBDIRS); do \
(cd $$d && $(MAKE) $@) || exit 1; \
@@ -82,7 +73,7 @@ install:
done
@$(LT) --mode=finish $(libdir);
-# Number format detection
+## Number format detection
H5detect:
(cd src && $(MAKE) $@)
diff --git a/README b/README
index 4054163..6bf2622 100644
--- a/README
+++ b/README
@@ -1,4 +1,4 @@
-This is hdf5-1.3.0 currently under development
+This is hdf5-1.3.0 released on Mon Jul 19 12:58:17 CDT 1999
Please refer to the INSTALL file for installation instructions.
------------------------------------------------------------------------------
diff --git a/config/commence.in b/config/commence.in
index 33b0d32..99d9f73 100644
--- a/config/commence.in
+++ b/config/commence.in
@@ -1,15 +1,15 @@
-#------------------------------------------------------------- -*- makefile -*-
-# The following section of this makefile comes from the
-# `./config/commence' file which was generated with config.status
-# from `./config/commence.in'.
-#------------------------------------------------------------------------------
+##------------------------------------------------------------ -*- makefile -*-
+## The following section of this makefile comes from the
+## `./config/commence' file which was generated with config.status
+## from `./config/commence.in'.
+##-----------------------------------------------------------------------------
-# Things that Make needs
+## Things that Make needs
.SUFFIXES:
.SUFFIXES: .c .o .lo
@SET_MAKE@
-# Programs
+## Programs
SHELL=/bin/sh
CC=@CC@
CFLAGS=@CFLAGS@
@@ -28,7 +28,7 @@ RUNPARALLEL=@RUNPARALLEL@
RUNTEST=$(RUNSERIAL)
TRACE=:
-# Installation points
+## Installation points
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
@@ -36,7 +36,7 @@ libdir=@libdir@
includedir=@includedir@
PUB_LIB=$(LIB)
-# Shared libraries
+## Shared libraries
LT=$(top_builddir)/libtool
LT_COMPILE=$(LT) --mode=compile $(CC)
LT_LINK_LIB=$(LT) --mode=link $(CC) -rpath $(libdir)
@@ -46,49 +46,60 @@ LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM)
LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA)
LT_UNINSTALL=$(LT) --mode=uninstall $(RM)
+## Optional variables. We must declare them here because Irix pmake
+## complains if it sees a reference to a variable which has never been
+## defined. The main makefile is free to redefine these to something else.
+LIB=
+LIB_SRC=
+LIB_OBJ=
+PUB_HDR=
+PROGS=
+TEST_PROGS=
+TEST_FLAGS=
+TEST_SCRIPTS=
-# The default is to build the library and/or programs. We must build
-# them sequentially.
+## The default is to build the library and/or programs. We must build
+## them sequentially.
all:
$(MAKE) lib
$(MAKE) progs
$(MAKE) tests
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target). We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-#
-# Graphically, the dependencies are:
-#
-# configure.in
-# | |
-# +-----------------+ +------------+
-# | |
-# stamp1 configure
-# (H5config.h.in) |
-# | | |
-# | +---------------+ +-----------+
-# | | |
-# | config.status
-# | |
-# | +------------------+
-# | |
-# stamp2
-# (H5config.h) Makefile.in et al
-# | |
-# +------------------+ +-----------+
-# | |
-# Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h. When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-#
+## The following rules insure that the Makefile is up-to-date by rerunning
+## various autoconf components (although not all versions of make assume
+## that the makefile is implicitly a target). We use time stamp files to
+## keep track of the most recent update of H5config.h.in and H5config.h
+## because autoheader and config.status don't update the modification time
+## if the contents don't change.
+##
+## Graphically, the dependencies are:
+##
+## configure.in
+## | |
+## +-----------------+ +------------+
+## | |
+## stamp1 configure
+## (H5config.h.in) |
+## | | |
+## | +---------------+ +-----------+
+## | | |
+## | config.status
+## | |
+## | +------------------+
+## | |
+## stamp2
+## (H5config.h) Makefile.in et al
+## | |
+## +------------------+ +-----------+
+## | |
+## Makefile
+##
+## A side effect of updating stamp1 is to generate H5config.h.in and a
+## side effect of updating stamp2 is to generate H5config.h. When using
+## a version of make that doesn't treat the makefile as the initial target
+## the user may want to occassionally type `make Makefile' in any source
+## directory.
+##
STAMP1=$(top_builddir)/config/stamp1
STAMP2=$(top_builddir)/config/stamp2
@@ -115,7 +126,8 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
Makefile: $(MAKEFILE_PARTS) $(STAMP2)
-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#------------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of `Makefile.in'
-# from this directory. It was generated by running `config.status'.
-#------------------------------------------------------------------------------
+##-----------------------------------------------------------------------------
+## The following section of this makefile comes from the middle of
+## `Makefile.in' from this directory. It was generated by running
+## `config.status'.
+##-----------------------------------------------------------------------------
diff --git a/config/conclude.in b/config/conclude.in
index 8e47c9e..b3ec16b 100644
--- a/config/conclude.in
+++ b/config/conclude.in
@@ -1,24 +1,24 @@
-#------------------------------------------------------------- -*- makefile -*-
-# The following section of this makefile comes from the
-# `./config/conclude' file which was generated with config.status
-# from `./config/conclude.in'.
-#------------------------------------------------------------------------------
-
-# This is the target for the library described in the main body of the
-# makefile.
-#
+##------------------------------------------------------------ -*- makefile -*-
+## The following section of this makefile comes from the
+## `./config/conclude' file which was generated with config.status
+## from `./config/conclude.in'.
+##-----------------------------------------------------------------------------
+
+## This is the target for the library described in the main body of the
+## makefile.
+##
lib: $(LIB)
$(LIB) __no_library__: $(LIB_OBJ)
@$(LT_LINK_LIB) -o $@ $(CFLAGS) $(LIB_OBJ) $(LIBS)
progs: $(LIB) $(PROGS)
-# Build a tags file in this directory.
+## Build a tags file in this directory.
TAGS: $(LIB_SRC)
$(RM) $@
-etags $(LIB_SRC)
-# Runs each test in order, passing $(TEST_FLAGS) to the program.
+## Runs each test in order, passing $(TEST_FLAGS) to the program.
tests: $(TEST_PROGS) $(LIB)
check test _test: tests
@for test in $(TEST_PROGS) dummy; do \
@@ -45,7 +45,7 @@ check test _test: tests
fi; \
done;
-# Make installation directories directories if they don't exist.
+## Make installation directories directories if they don't exist.
$(libdir):
mkdir $@ && chmod 755 $@
@@ -55,7 +55,7 @@ $(includedir):
$(bindir):
mkdir $@ && chmod 755 $@
-# Install the library, the public header files, and programs.
+## Install the library, the public header files, and programs.
install: $(PUB_LIB) $(PUB_HDR) $(PROGS) $(libdir) $(includedir) $(bindir)
@for f in X $(PUB_LIB); do \
if test $$f != X; then \
@@ -81,7 +81,7 @@ install: $(PUB_LIB) $(PUB_HDR) $(PROGS) $(libdir) $(includedir) $(bindir)
fi; \
done
-# Removes those things that `make install' (would have) installed.
+## Removes those things that `make install' (would have) installed.
uninstall:
@if test "X$(LIB)" != X; then \
for f in $(LIB); do \
@@ -97,27 +97,27 @@ uninstall:
done; \
fi
-# Removes temporary files without removing the final target files. That is,
-# remove things like object files but not libraries or executables.
-#
+## Removes temporary files without removing the final target files. That is,
+## remove things like object files but not libraries or executables.
+##
mostlyclean:
-$(RM) $(LIB_OBJ) $(LIB_OBJ:.lo=.o)
-$(RM) $(TEST_OBJ) $(TEST_OBJ:.lo=.o)
-$(RM) $(PROG_OBJ) $(PROG_OBJ:.lo=.o) $(MOSTLYCLEAN)
-# Like `mostlyclean' except it also removes the final targets: things like
-# libraries and executables. This target doesn't remove any file that
-# is part of the HDF5 distribution.
-#
+## Like `mostlyclean' except it also removes the final targets: things like
+## libraries and executables. This target doesn't remove any file that
+## is part of the HDF5 distribution.
+##
clean: mostlyclean
-$(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN)
-$(RM) -r .libs
-# Like `clean' except it also removes files that were created by running
-# configure. If you've unpacked the source and built HDF5 without creating
-# any other files, then `make distclean' will leave only the files that were
-# in the distribution.
-#
+## Like `clean' except it also removes files that were created by running
+## configure. If you've unpacked the source and built HDF5 without creating
+## any other files, then `make distclean' will leave only the files that were
+## in the distribution.
+##
distclean: clean
-$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
@if test -f $(srcdir)/Makefile.in; then \
@@ -125,28 +125,28 @@ distclean: clean
fi
-# Like `distclean' except it deletes all files that can be regenerated from
-# the makefile, including those generated from autoheader and autoconf.
-#
+## Like `distclean' except it deletes all files that can be regenerated from
+## the makefile, including those generated from autoheader and autoconf.
+##
maintainer-clean: distclean
-$(RM) *~ core core.* *.core *.bak *.contrib gmon.out
-# Implicit rules
+## Implicit rules
.c.o:
$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
.c.lo:
@$(LT_COMPILE) $(CFLAGS) $(CPPFLAGS) -c $<
-#------------------------------------------------------------------------------
-# The following section of this makefile contains dependencies between the
-# source files and the header files. If GNU make and GCC are being used then
-# the dependencies are in the form of rules that cause the information to
-# be kept updated automatically. Otherwise the dependencies are listed
-# explicitly and come from the `.distdep' files in the various directories.
-# These files are part of the distribution and are generated automatically on
-# GNU/GCC systems.
-#------------------------------------------------------------------------------
+##-----------------------------------------------------------------------------
+## The following section of this makefile contains dependencies between the
+## source files and the header files. If GNU make and GCC are being used then
+## the dependencies are in the form of rules that cause the information to
+## be kept updated automatically. Otherwise the dependencies are listed
+## explicitly and come from the `.distdep' files in the various directories.
+## These files are part of the distribution and are generated automatically on
+## GNU/GCC systems.
+##-----------------------------------------------------------------------------
@DEPEND1@
@DEPEND2@
diff --git a/config/depend.in b/config/depend.in
index a02ad20..6915524 100644
--- a/config/depend.in
+++ b/config/depend.in
@@ -1,25 +1,25 @@
-# -*- makefile -*-
+## -*- makefile -*-
-# We keep a list of dependencies in `.depend' for each of the source
-# files on which it depends. When one of the source files is modified
-# we remove its record from .depend and regenerate its dependencies,
-# tacking them onto the end of .depend. By including the .depend file
-# into the makefile, we're telling make that the makefile depends on
-# the dependency list in the .depend file.
-#
-# This is as fast as the `.d' method described in the GNU make manual
-# for automatic dependencies, but has the added advantage that all
-# dependencies are stored in one place. The advantage over the
-# `makedepend' program is that only those files that are out of date
-# have dependency information rebuilt, and the Makefile is not
-# modified.
-#
-# This is also where tracing information is updated. The $(TRACE)
-# program is run on each source file to make sure that the H5TRACE()
-# macros are up to date. If they are then the file is not modified,
-# otherwise the file is changed and a backup is saved by appending a
-# tilde to the file name.
-#
+## We keep a list of dependencies in `.depend' for each of the source
+## files on which it depends. When one of the source files is modified
+## we remove its record from .depend and regenerate its dependencies,
+## tacking them onto the end of .depend. By including the .depend file
+## into the makefile, we're telling make that the makefile depends on
+## the dependency list in the .depend file.
+##
+## This is as fast as the `.d' method described in the GNU make manual
+## for automatic dependencies, but has the added advantage that all
+## dependencies are stored in one place. The advantage over the
+## `makedepend' program is that only those files that are out of date
+## have dependency information rebuilt, and the Makefile is not
+## modified.
+##
+## This is also where tracing information is updated. The $(TRACE)
+## program is run on each source file to make sure that the H5TRACE()
+## macros are up to date. If they are then the file is not modified,
+## otherwise the file is changed and a backup is saved by appending a
+## tilde to the file name.
+##
.PRECIOUS: .depend .distdep
dep depend: .distdep
diff --git a/examples/Makefile.in b/examples/Makefile.in
index 04ff350..e77bd7a 100644
--- a/examples/Makefile.in
+++ b/examples/Makefile.in
@@ -1,38 +1,39 @@
-# HDF5 Library Examples Makefile(.in)
-#
-# Copyright (C) 1997 National Center for Supercomputing Applications.
-# All rights reserved.
-#
+## HDF5 Library Examples Makefile(.in)
+##
+## Copyright (C) 1997 National Center for Supercomputing Applications.
+## All rights reserved.
+##
top_srcdir=@top_srcdir@
top_builddir=..
srcdir=@srcdir@
VPATH=.:@srcdir@
+.PATH: . @srcdir@
@COMMENCE@
-# Add include directory to the C preprocessor flags and the hdf5 library
-# to the library list.
+## Add include directory to the C preprocessor flags and the hdf5 library
+## to the library list.
CPPFLAGS=-I. -I$(srcdir) -I../src -I$(top_srcdir)/src @CPPFLAGS@
LIBHDF5=../src/libhdf5.la
-# These are the programs that `make all' or `make tests' will build and which
-# `make check' will run. List them in the order they should be run.
+## These are the programs that `make all' or `make tests' will build and which
+## `make check' will run. List them in the order they should be run.
TEST_PROGS= h5_write h5_read h5_extend_write h5_chunk_read h5_compound \
h5_group h5_select h5_attribute h5_mount h5_reference
-# These are the files that `make clean' (and derivatives) will remove from
-# this directory.
+## These are the files that `make clean' (and derivatives) will remove from
+## this directory.
CLEAN=*.h5
-# List all source files here. The list of object files will be
-# created by replacing the `.c' with a `.o'. This list is necessary
-# for building automatic dependencies.
+## List all source files here. The list of object files will be
+## created by replacing the `.c' with a `.o'. This list is necessary
+## for building automatic dependencies.
TEST_SRC=h5_chunk_read.c h5_compound.c h5_extend_write.c h5_group.c \
h5_read.c h5_write.c h5_select.c h5_attribute.c h5_mount.c \
h5_reference.c
TEST_OBJ=$(TEST_SRC:.c=.lo)
-# How to build the programs... they all depend on the hdf5 library
+## How to build the programs... they all depend on the hdf5 library
$(TEST_PROGS): $(LIBHDF5)
h5_chunk_read: h5_chunk_read.lo
@$(LT_LINK_EXE) $(CFLAGS) -o $@ h5_chunk_read.lo $(LIBHDF5) $(LDFLAGS) $(LIBS)
diff --git a/pablo/Makefile.in b/pablo/Makefile.in
index 1a77d83..d5df455 100644
--- a/pablo/Makefile.in
+++ b/pablo/Makefile.in
@@ -1,33 +1,34 @@
-# HDF5 Library Makefile(.in)
-#
-# Copyright (C) 1997 National Center for Supercomputing Applications.
-# All rights reserved.
-#
-#
+## HDF5 Library Makefile(.in)
+##
+## Copyright (C) 1997 National Center for Supercomputing Applications.
+## All rights reserved.
+##
+##
top_srcdir=@top_srcdir@
top_builddir=..
srcdir=@srcdir@
VPATH=.:@srcdir@
+.PATH: . @srcdir@
@COMMENCE@
TRACE=perl ../bin/trace
###############################################################################
-# *** MODIFICATONS FOR CREATING THE PABLO INSTRUMENTED LIBRARY libhdf5-inst.a #
-# For Pablo instrumenation of parallel code, remove the # from in front of #
-# PABLO_MPIO_FLAGS. #
-# Set PABLO_INC equal to the path of the include directory for the Pablo #
-# TraceLibrary #
+## MODIFICATONS FOR CREATING THE PABLO INSTRUMENTED LIBRARY libhdf5-inst.a
+## For Pablo instrumenation of parallel code, remove the # from in front of
+## PABLO_MPIO_FLAGS.
+## Set PABLO_INC equal to the path of the include directory for the Pablo
+## TraceLibrary
###############################################################################
-#PABLO_MPIO_FLAGS = -DHAVE_PARALLEL -DHAVE_MPIOTRACE
+##PABLO_MPIO_FLAGS = -DHAVE_PARALLEL -DHAVE_MPIOTRACE
PABLO_INC =
PABLO_FLAGS = -I$(PABLO_INC) -DHAVE_PABLO $(PABLO_MPIO_FLAGS)
-# Add `-I.' to the C preprocessor flags.
+## Add `-I.' to the C preprocessor flags.
CPPFLAGS=-I. -I../src $(PABLO_FLAGS) @CPPFLAGS@
-# This is our main target:
+## This is our main target:
LIB=libhdf5-inst.a
-# Source and object files for the library (lexicographically)...
+## Source and object files for the library (lexicographically)...
LIB_SRC=H5.c H5A.c H5AC.c H5B.c H5D.c H5E.c H5F.c H5Farray.c H5Fcore.c \
H5Ffamily.c H5Fistore.c H5Flow.c H5Fmpio.c H5Fsec2.c H5Fsplit.c \
H5Fstdio.c H5G.c H5Gent.c H5Gnode.c H5Gstab.c H5HG.c H5HL.c H5I.c H5MF.c \
@@ -39,61 +40,61 @@ LIB_SRC=H5.c H5A.c H5AC.c H5B.c H5D.c H5E.c H5F.c H5Farray.c H5Fcore.c \
LIB_OBJ=$(LIB_SRC:.c=.o)
-# Temporary files
+## Temporary files
MOSTLYCLEAN=H5detect.o H5detect H5Tinit.o H5Tinit.c
-# Pablo header files (to be installed)...
+## Pablo header files (to be installed)...
PABLO_HDR = HDFentryNames.h HDFidList.h ProcIDs.h HDFTrace.h ProcTrace.h \
ProcTrace.inc
-# Public header files ...
+## Public header files ...
PUB_HDR=H5public.h H5Apublic.h H5ACpublic.h H5Bpublic.h H5Dpublic.h \
H5Epublic.h H5Fpublic.h H5Gpublic.h H5HGpublic.h H5HLpublic.h \
H5Ipublic.h H5MFpublic.h H5MMpublic.h H5Opublic.h H5Ppublic.h \
H5Rpublic.h H5RApublic.h H5Spublic.h H5Tpublic.h H5Zpublic.h H5config.h \
hdf5.h
-# Other header files (not to be installed)...
+## Other header files (not to be installed)...
PRIVATE_HDR=H5private.h H5Aprivate.h H5Apkg.h H5ACprivate.h H5Bprivate.h \
H5Dprivate.h H5Eprivate.h H5Fprivate.h H5Gprivate.h H5Gpkg.h \
H5HGprivate.h H5HLprivate.h H5Iprivate.h H5MFprivate.h H5MMprivate.h \
H5Oprivate.h H5Pprivate.h H5Rprivate.h H5RAprivate.h H5Sprivate.h \
H5Tprivate.h H5TBprivate.h H5Tpkg.h H5Vprivate.h H5Zprivate.h
-# Number format detection
+## Number format detection
H5Tinit.c: ../src/H5Tinit.c
cp ../src/H5Tinit.c .
-#------------------------------------------------------------- -*- makefile -*-
-# The following section of this makefile comes from the
-# `./config/conclude' file which was generated with config.status
-# from `./config/conclude.in'.
-#------------------------------------------------------------------------------
+##------------------------------------------------------------ -*- makefile -*-
+## The following section of this makefile comes from the
+## `./config/conclude' file which was generated with config.status
+## from `./config/conclude.in'.
+##-----------------------------------------------------------------------------
-# This is the target for the library described in the main body of the
-# makefile.
-#
+## This is the target for the library described in the main body of the
+## makefile.
+##
lib: $(LIB)
$(LIB) __no_library__: $(LIB_OBJ)
$(AR) -rc $@ $(LIB_OBJ)
$(RANLIB) $@
-#
-# Dummy this out so that there is no redundant make of the library
-#
+##
+## Dummy this out so that there is no redundant make of the library
+##
progs:
-# Build a tags file in this directory.
+## Build a tags file in this directory.
TAGS: $(LIB_SRC)
$(RM) $@
-etags $(LIB_SRC)
-#
-# Dummy this out so that there is no redundant make of the library
-#
+##
+## Dummy this out so that there is no redundant make of the library
+##
tests:
-# Install the library, the public header files, and programs.
+## Install the library, the public header files, and programs.
install: $(LIB)
@test -d $(libdir) || mkdir $(libdir)
@for f in X $(LIB); do \
@@ -108,42 +109,42 @@ install: $(LIB)
fi \
done
-# Removes those things that `make install' (would have) installed.
+## Removes those things that `make install' (would have) installed.
uninstall:
@if test "X$(LIB)" != X; then \
set -x; cd $(libdir) && $(RM) $(LIB); \
fi
-# Removes temporary files without removing the final target files. That is,
-# remove things like object files but not libraries or executables.
-#
+## Removes temporary files without removing the final target files. That is,
+## remove things like object files but not libraries or executables.
+##
mostlyclean:
$(RM) $(LIB_OBJ) $(TEST_OBJ) $(PROG_OBJ) $(MOSTLYCLEAN)
-# Like `mostlyclean' except it also removes the final targets: things like
-# libraries and executables. This target doesn't remove any file that
-# is part of the HDF5 distribution.
-#
+## Like `mostlyclean' except it also removes the final targets: things like
+## libraries and executables. This target doesn't remove any file that
+## is part of the HDF5 distribution.
+##
clean: mostlyclean
$(RM) $(LIB) $(TESTS) $(PROGS) $(CLEAN) $(PABLO_CLEAN)
-# Like `clean' except it also removes files that were created by running
-# configure. If you've unpacked the source and built HDF5 without creating
-# any other files, then `make distclean' will leave only the files that were
-# in the distribution.
-#
+## Like `clean' except it also removes files that were created by running
+## configure. If you've unpacked the source and built HDF5 without creating
+## any other files, then `make distclean' will leave only the files that were
+## in the distribution.
+##
distclean: clean
$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
@if test -f $(srcdir)/Makefile.in; then \
(set -x; $(RM) Makefile); \
fi
-# Like `distclean' except it deletes all files that can be regenerated from
-# the makefile, including those generated from autoheader and autoconf.
-#
+## Like `distclean' except it deletes all files that can be regenerated from
+## the makefile, including those generated from autoheader and autoconf.
+##
maintainer-clean: distclean
$(RM) *~ core core.* *.core *.bak *.contrib gmon.out
-# Implicit rules
+## Implicit rules
.c.a:
$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
$(AR) -rc $@ $*.o
@@ -197,15 +198,15 @@ PabloHDF_RT.o: PabloHDF_RT.c $(PABLO_INCLUDES)
PabloHDF_SDDF.o: PabloHDF_SDDF.c $(PABLO_INCLUDES)
$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
-#------------------------------------------------------------------------------
-# The following section of this makefile contains dependencies between the
-# source files and the header files. If GNU make and GCC are being used then
-# the dependencies are in the form of rules that cause the information to
-# be kept updated automatically. Otherwise the dependencies are listed
-# explicitly and come from the `.distdep' files in the various directories.
-# These files are part of the distribution and are generated automatically on
-# GNU/GCC systems.
-#------------------------------------------------------------------------------
+##-----------------------------------------------------------------------------
+## The following section of this makefile contains dependencies between the
+## source files and the header files. If GNU make and GCC are being used then
+## the dependencies are in the form of rules that cause the information to
+## be kept updated automatically. Otherwise the dependencies are listed
+## explicitly and come from the `.distdep' files in the various directories.
+## These files are part of the distribution and are generated automatically on
+## GNU/GCC systems.
+##-----------------------------------------------------------------------------
H5A.c: ../src/H5A.c
H5A.o: \
diff --git a/src/Makefile.in b/src/Makefile.in
index 8b8c9bc..8c1b288 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,24 +1,25 @@
-# HDF5 Library Makefile(.in)
-#
-# Copyright (C) 1997 National Center for Supercomputing Applications.
-# All rights reserved.
-#
-#
+## HDF5 Library Makefile(.in)
+##
+## Copyright (C) 1997 National Center for Supercomputing Applications.
+## All rights reserved.
+##
+##
top_srcdir=@top_srcdir@
top_builddir=..
srcdir=@srcdir@
VPATH=.:@srcdir@
+.PATH: . @srcdir@
@COMMENCE@
TRACE=perl $(top_srcdir)/bin/trace
-# Add `-I.' to the C preprocessor flags.
+## Add `-I.' to the C preprocessor flags.
CPPFLAGS=-I. -I@srcdir@ @CPPFLAGS@
-# This is our main target:
+## This is our main target:
LIB=libhdf5.la
-# Source and object files for the library (lexicographically)...
+## Source and object files for the library (lexicographically)...
LIB_SRC=H5.c H5A.c H5AC.c H5B.c H5D.c H5E.c H5F.c H5Farray.c H5Fcore.c \
H5Ffamily.c H5Fistore.c H5Flow.c H5Fmpio.c H5Fsec2.c H5Fsplit.c \
H5Fstdio.c H5G.c H5Gent.c H5Gnode.c H5Gstab.c H5HG.c H5HL.c H5I.c H5MF.c \
@@ -30,28 +31,28 @@ LIB_SRC=H5.c H5A.c H5AC.c H5B.c H5D.c H5E.c H5F.c H5Farray.c H5Fcore.c \
LIB_OBJ=$(LIB_SRC:.c=.lo)
-# Temporary files
+## Temporary files
MOSTLYCLEAN=H5detect.o H5detect H5Tinit.o H5Tinit.c
-# Public header files (to be installed)...
+## Public header files (to be installed)...
PUB_HDR=H5public.h H5Apublic.h H5ACpublic.h H5Bpublic.h H5Dpublic.h \
H5Epublic.h H5Fpublic.h H5Gpublic.h H5HGpublic.h H5HLpublic.h \
H5Ipublic.h H5MFpublic.h H5MMpublic.h H5Opublic.h H5Ppublic.h \
H5Rpublic.h H5RApublic.h H5Spublic.h H5Tpublic.h H5Zpublic.h H5config.h \
hdf5.h H5api_adpt.h
-# Other header files (not to be installed)...
+## Other header files (not to be installed)...
PRIVATE_HDR=H5private.h H5Aprivate.h H5Apkg.h H5ACprivate.h H5Bprivate.h \
H5Dprivate.h H5Eprivate.h H5Fprivate.h H5Gprivate.h H5Gpkg.h \
H5HGprivate.h H5HLprivate.h H5Iprivate.h H5MFprivate.h H5MMprivate.h \
H5Oprivate.h H5Pprivate.h H5Rprivate.h H5RAprivate.h H5Sprivate.h \
H5Tprivate.h H5TBprivate.h H5Tpkg.h H5Vprivate.h H5Zprivate.h
-# Number format detection
+## Number format detection
H5Tinit.c: H5detect
$(RUNSERIAL) ./H5detect >H5Tinit.c
-# no $(LIB) in the action below since that's being made now.
+## no $(LIB) in the action below since that's being made now.
H5detect: H5detect.o
$(CC) $(CFLAGS) -o $@ H5detect.o $(LDFLAGS) $(LIBS)
diff --git a/test/Makefile.in b/test/Makefile.in
index 20b699b..7ad9478 100644
--- a/test/Makefile.in
+++ b/test/Makefile.in
@@ -1,30 +1,31 @@
-# HDF5 Library Test Makefile(.in)
-#
-# Copyright (C) 1997 National Center for Supercomputing Applications.
-# All rights reserved.
-#
-#
+## HDF5 Library Test Makefile(.in)
+##
+## Copyright (C) 1997 National Center for Supercomputing Applications.
+## All rights reserved.
+##
+##
top_srcdir=@top_srcdir@
top_builddir=..
srcdir=@srcdir@
VPATH=.:@srcdir@
+.PATH: . @srcdir@
@COMMENCE@
-# Add include directory to the C preprocessor flags and the h5test and hdf5
-# libraries to the library list.
+## Add include directory to the C preprocessor flags and the h5test and hdf5
+## libraries to the library list.
CPPFLAGS=-I. -I$(srcdir) -I../src -I$(top_srcdir)/src @CPPFLAGS@
-# These are our main targets. They should be listed in the order to be
-# executed, generally most specific tests to least specific tests.
+## These are our main targets. They should be listed in the order to be
+## executed, generally most specific tests to least specific tests.
RUNTEST=$(LT_RUN)
TEST_PROGS=testhdf5 lheap ohdr stab gheap hyperslab istore bittests dtypes \
dsets cmpd_dset extend external links unlink big mtime fillval mount \
flush1 flush2 enum
TIMINGS=iopipe chunk ragged overhead
-# The libh5test.a library provides common support code for the tests. We link
-# this library statically because some systems can only link executables to
-# a single shared library and libhdf5 is much bigger than libh5test.
+## The libh5test.a library provides common support code for the tests. We link
+## this library statically because some systems can only link executables to
+## a single shared library and libhdf5 is much bigger than libh5test.
LT_LINK_LIB=$(LT) --mode=link $(CC) -static -rpath $(libdir)
LIBHDF5=../src/libhdf5.la
LIB=libh5test.la
@@ -32,11 +33,11 @@ LIB_SRC=h5test.c
LIB_OBJ=$(LIB_SRC:.c=.lo)
PUB_LIB=
-# Temporary files. These files are the ones created by setting the
-# HDF5_NOCLEANUP environment variable and running `make test' without
-# specifying a file prefix or low-level driver. Changing the file
-# prefix or low-level driver with environment variables will influence
-# the temporary file name in ways that the makefile is not aware of.
+## Temporary files. These files are the ones created by setting the
+## HDF5_NOCLEANUP environment variable and running `make test' without
+## specifying a file prefix or low-level driver. Changing the file
+## prefix or low-level driver with environment variables will influence
+## the temporary file name in ways that the makefile is not aware of.
MOSTLYCLEAN=cmpd_dset.h5 dataset.h5 extend.h5 istore.h5 tfile1.h5 tfile2.h5 \
tfile3.h5 th5s1.h5 lheap.h5 ohdr.h5 stab1.h5 stab2.h5 \
extern_1.h5 extern_2.h5 extern_3.h5 extern_1a.raw extern_1b.raw \
@@ -49,10 +50,10 @@ MOSTLYCLEAN=cmpd_dset.h5 dataset.h5 extend.h5 istore.h5 tfile1.h5 tfile2.h5 \
flush.h5 enum1.h5
CLEAN=$(TIMINGS)
-# Source and object files for programs... The TEST_SRC list contains all the
-# source files and is used for things like dependencies, archiving, etc. The
-# other source lists are for the individual tests, the files of which may
-# overlap with other tests.
+## Source and object files for programs... The TEST_SRC list contains all the
+## source files and is used for things like dependencies, archiving, etc. The
+## other source lists are for the individual tests, the files of which may
+## overlap with other tests.
TEST_SRC=big.c bittests.c chunk.c cmpd_dset.c dsets.c dtypes.c extend.c \
external.c fillval.c flush1.c flush2.c gheap.c h5test.c hyperslab.c \
iopipe.c istore.c lheap.c links.c mount.c mtime.c ohdr.c overhead.c \
@@ -60,10 +61,10 @@ TEST_SRC=big.c bittests.c chunk.c cmpd_dset.c dsets.c dtypes.c extend.c \
tselect.c tvltypes.c unlink.c enum.c
TEST_OBJ=$(TEST_SRC:.c=.lo)
-# Private header files (not to be installed)...
+## Private header files (not to be installed)...
PRIVATE_HDR=testhdf5.h
-# Additional targets
+## Additional targets
.PHONY: timings _timings
timings _timings: $(TIMINGS)
@for timing in $(TIMINGS) dummy; do \
@@ -73,7 +74,7 @@ timings _timings: $(TIMINGS)
fi; \
done;
-# How to build the tests... They all depend on the test and hdf5 libraries.
+## How to build the tests... They all depend on the test and hdf5 libraries.
$(TEST_PROGS): $(LIB) $(LIBHDF5)
TESTHDF5_OBJ=testhdf5.lo tattr.lo tfile.lo tmeta.lo trefer.lo tselect.lo tvltypes.lo th5s.lo
testhdf5: $(TESTHDF5_OBJ)
diff --git a/testpar/Makefile.in b/testpar/Makefile.in
index 624e5f9..fdb47a6 100644
--- a/testpar/Makefile.in
+++ b/testpar/Makefile.in
@@ -1,36 +1,37 @@
-# hdf5 Parallel Library Test Makefile(.in)
-#
-# Copyright (C) 1998 National Center for Supercomputing Applications
-# All rights reserved
-#
-#
+## hdf5 Parallel Library Test Makefile(.in)
+##
+## Copyright (C) 1998 National Center for Supercomputing Applications
+## All rights reserved
+##
+##
top_srcdir=@top_srcdir@
top_builddir=..
srcdir=@srcdir@
VPATH=.:@srcdir@
+.PATH: . @srcdir@
@COMMENCE@
-# Add the include directory to the C preprocessor flags the the hdf5 library
-# to the library list.
+## Add the include directory to the C preprocessor flags the the hdf5 library
+## to the library list.
CPPFLAGS=-I. -I$(srcdir) -I../src -I$(top_srcdir)/src @CPPFLAGS@
LIBHDF5=../src/libhdf5.la
-# These tests are parallel
+## These tests are parallel
RUNTEST=$(RUNPARALLEL)
-# These are our main targets
+## These are our main targets
TEST_PROGS=testphdf5
-# Temporary files
+## Temporary files
MOSTLYCLEAN=ParaEg[123].h5f
DISTCLEAN=go
-# Test source files
+## Test source files
TEST_SRC=testphdf5.c t_dset.c t_file.c t_mpi.c
TEST_OBJ=$(TEST_SRC:.c=.lo)
TEST_HDR=testphdf5.h
-# How to build the tests... They all depend on the hdf5 library
+## How to build the tests... They all depend on the hdf5 library
$(TEST_PROGS): ../src/libhdf5.la
testphdf5: $(TEST_OBJ)
diff --git a/tools/Makefile.in b/tools/Makefile.in
index 6dab9e9..dfc6c9f 100644
--- a/tools/Makefile.in
+++ b/tools/Makefile.in
@@ -1,51 +1,52 @@
-# HDF5 Library Makefile(.in)
-#
-# Copyright (C) 1997 National Center for Supercomputing Applications.
-# All rights reserved.
-#
-#
+## HDF5 Library Makefile(.in)
+##
+## Copyright (C) 1997 National Center for Supercomputing Applications.
+## All rights reserved.
+##
+##
top_srcdir=@top_srcdir@
top_builddir=..
srcdir=@srcdir@
VPATH=.:@srcdir@
+.PATH: . @srcdir@
@COMMENCE@
-# Add include directory to the C preprocessor flags, add -lh5tools and
-# -lhdf5 to the list of libraries.
+## Add include directory to the C preprocessor flags, add -lh5tools and
+## -lhdf5 to the list of libraries.
CPPFLAGS=-I. -I$(srcdir) -I../src -I$(top_srcdir)/src @CPPFLAGS@
-# Test programs and scripts.
+## Test programs and scripts.
TEST_PROGS=
TEST_SCRIPTS=$(srcdir)/testh5dump.sh @TESTH5TOH4@
-# These are our main targets: library and tools. We link this library
-# statically because some systems can only link executables to a single
-# shared library and libhdf5 is much bigger than libh5tools.
+## These are our main targets: library and tools. We link this library
+## statically because some systems can only link executables to a single
+## shared library and libhdf5 is much bigger than libh5tools.
LT_LINK_LIB=$(LT) --mode=link $(CC) -static -rpath $(libdir)
LIB=libh5tools.la
LIBHDF5=../src/libhdf5.la
PROGS=h5debug h5import h5ls h5repart h5dump h5dumptst @H5TOH4@
-# Source and object files for the library; do not install
+## Source and object files for the library; do not install
LIB_SRC=h5tools.c h5findshd.c
LIB_OBJ=$(LIB_SRC:.c=.lo)
PUB_LIB=
-# Source and object files for programs...
+## Source and object files for programs...
PROG_SRC=h5debug.c h5import.c h5ls.c h5repart.c h5dump.c h5dumputil.c \
h5toh4.c h5dumptst.c
PROG_OBJ=$(PROG_SRC:.c=.lo)
PRIVATE_HDR=h5tools.h
-# Source and object files for the tests
+## Source and object files for the tests
TEST_SRC=
TEST_OBJ=$(TEST_SRC:.c=.lo)
-# Programs have to be built before they can be tested!
+## Programs have to be built before they can be tested!
check test _test: $(PROGS)
-# How to build the programs... They all depend on the hdf5 library and
-# the tools library compiled in this directory.
+## How to build the programs... They all depend on the hdf5 library and
+## the tools library compiled in this directory.
$(PROGS): $(LIB) ../src/libhdf5.la
h5debug: h5debug.lo