diff options
| -rw-r--r-- | INSTALL_Windows.txt | 359 |
1 files changed, 192 insertions, 167 deletions
diff --git a/INSTALL_Windows.txt b/INSTALL_Windows.txt index ea00d44..72b4918 100644 --- a/INSTALL_Windows.txt +++ b/INSTALL_Windows.txt @@ -13,99 +13,105 @@ The following sections discuss in detail installation procedures. Section 1: Building from Source Code Release (hdf5-1_2_0.zip) -=============================================== +================================================== STEP I: Preconditions To build the HDF5 and tests, it is assumed that you have done the following: - 1. Installed MicroSoft Developer Studio, and Visual C++ 5.0 or 6.0. + 1. Installed MicroSoft Developer Studio, and Visual C++ 5.0 or + 6.0. + + 2. Set up a directory structure to unpack the library. For example: - 2. Set up a directory structure to unpack the library. For - example: c:\ (any drive) - MyHDFstuff\ (any folder name) + MyHDFstuff\ (any folder name) + + 3. Copied the source distribution archive to that directory and + unpacked it using the appropriate archiver options to create a + directory hierarchy. - 3. Copied the source distribution archive to that directory - and unpacked it using the appropriate archiver options to - create a directory hierarchy. - - Run WinZip on hdf5-1_2_0.zip (the entire source tree). - This creates a directory called 'hdf5' which - contains several files and directories. + Run WinZip on hdf5-1_4_0.zip (the entire source tree). This + creates a directory called 'hdf5' which contains several files and + directories. - 4. You do not have a version of the zlib library and you would like to - use it. If you do not want to use the zlib library or have your own - version read the section about the zlib library. + 4. You do not have a version of the zlib library and you would like + to use it. If you do not want to use the zlib library or have your + own version read the section about the zlib library. STEP II: Building the Libraries and tests. - 1. Rename the directory under C:\myHDFstuff\ from hdf5xxx to hdf5. - 2. Unpack all.zip in 'hdf5' and move the zlib.dll from - c:\myHDFstuff\hdf5\src\zlib\dll to the Windows system directory. + 1. Rename the directory under C:\myHDFstuff\ from hdf5xxx to hdf5. + + 2. Unpack all.zip in 'hdf5' and move the zlib.dll from + c:\myHDFstuff\hdf5\src\zlib\dll to the Windows system directory. + + NOTE TO ALPHA USERS- the version of zlib that is packaged in + all.zip is for Intel platforms. The Alpha versions of the + libraries can be obtained from ftp://hdf.ncsa.uiuc.edu/HDF5/. The + file to download is Alphazlib.zip. After the file is downloaded + replace the src\zlib directory with the files from Alphazlib.zip. - NOTE TO ALPHA USERS- the version of zlib that is packaged in all.zip - is for Intel platforms. The Alpha versions of the libraries can be - obtained from ftp://hdf.ncsa.uiuc.edu/HDF5/. The file to download - is Alphazlib.zip. After the file is downloaded replace the src\zlib - directory with the files from Alphazlib.zip. + 3. Invoke Microsoft Visual C++, go to "File" and select the "Open + Workspace" option. - 3. Invoke Microsoft Visual C++, go to "File" and select - the "Open Workspace" option. + Then open the c:\myHDFstuff\hdf5\proj\all\all.dsw workspace. - Then open the c:\myHDFstuff\hdf5\proj\all\all.dsw workspace. + 4. Select "Build", then Select "Set Active Configuration". - 4. Select "Build", then Select "Set Active Configuration". + On Windows platform select as the active configuration - On Windows platform select as the active configuration + "all -- Win32 Debug" to build debug versions of + single-threaded static libraries, and + tests. + or - "all -- Win32 Debug" to build debug versions of single-threaded - static libraries, and tests. - or + "all -- Win32 Release" to build release versions of + single-threaded static libraries, and + tests. - "all -- Win32 Release" to build release versions of single-threaded - static libraries, and tests. + On the Alpha platform select as the active configuration - On the Alpha platform select as the active configuration + "all -- Win32 AlphaDbg" to build debug versions of + single-threaded static libraries, and + tests. + or - "all -- Win32 AlphaDbg" to build debug versions of single-threaded - static libraries, and tests. - or + "all -- Win32 AlphaRel" to build release versions of + single-threaded static libraries, and + tests. - "all -- Win32 AlphaRel" to build release versions of single-threaded - static libraries, and tests. + Select "Build" and "Build all.exe" to build the corresponding + version of the HDF5 library. - Select "Build" and "Build all.exe" to - build the corresponding version of the HDF5 library. + NOTE: "all" is a dummy target. You will get a link error when + "all.exe." is built: - NOTE: "all" is a dummy target. You will get a link error when - "all.exe." is built : - LINK: error LNK2001: unresolved external symbol + LINK: error LNK2001: unresolved external symbol _mainCRTStartup..... - all.exe - 2 error(s), .... + all.exe - 2 error(s), .... - Warning messages can be ignored. The "all.exe" is never created, - so it is OK. + Warning messages can be ignored. The "all.exe" is never created, + so it is OK. - When the debug or release build is done the directories listed - below will contain the following files : + When the debug or release build is done the directories listed + below will contain the following files : c:\MyHDFstuff\hdf5\proj\hdf5\debug - c:\MyHDFstuff\hdf5\proj\hdf5\release - - hdf5.lib- the hdf5 library + hdf5.lib- the hdf5 library c:\MyHDFstuff\hdf5\proj\hdf5dll\debug - c:\MyHDFstuff\hdf5\proj\hdf5dll\release - - hdf5.dll- the hdf5 library + hdf5.dll- the hdf5 library hdf5.lib- the dll export library - c:\MyHDFstuff\hdf5\test\"test directory"- + c:\MyHDFstuff\hdf5\test\"test directory"- where test directory is one of the following: - big bittests @@ -162,60 +168,63 @@ corresponding tests. STEP III: TESTING THE BUILD -In a command prompt window run the test batch file which -resides in the hdf5\test directory to make sure that the library -was built correctly. +In a command prompt window run the test batch file which resides in the +hdf5\test directory to make sure that the library was built correctly. -To test, cd into the hdf5\test directory. Then type: -"hdf5test [debug or release] [dll]" depending on which version you would -like to test. +To test, cd into the hdf5\test directory. Then type: "hdf5test [debug or +release] [dll]" depending on which version you would like to test. -To use the timing tests use the hdf5timingtest.bat file found in the hdf5\test -directory. Type: "hdf5timingtest [debug or release] [dll]" depending on which -version you would like to test. +To use the timing tests use the hdf5timingtest.bat file found in the +hdf5\test directory. Type: "hdf5timingtest [debug or release] [dll]" +depending on which version you would like to test. -To test the h5dump utility, cd into hdf5\tools. Then type: -"dumptest [debug or release] [dll]" depending on which version you would like -to test. Some differences are expected in the output of these 4 tests (the +To test the h5dump utility, cd into hdf5\tools. Then type: "dumptest +[debug or release] [dll]" depending on which version you would like to +test. Some differences are expected in the output of these 4 tests (the errors are in the dimensions of the dataspace). -NOTE: the appropriate dll should be placed in the Windows\system directory -before using the dlls. +NOTE: The appropriate dll should be placed in the Windows\system + directory before using the dlls. + +NOTE: The debug dll tests on the Alpha platform currently are not + completely working. The release dll is fine though. -NOTE: The debug dll tests on the Alpha platform currently are not completely - working. The release dll is fine though. - STEP IV: BUILDING THE EXAMPLES - 1. Invoke Microsoft Visual C++, go to "File" and select - the "Open Workspace" option. - Then open the c:\myHDFstuff\hdf5\examples\allexamples\allexamples.dsw - workspace. + 1. Invoke Microsoft Visual C++, go to "File" and select + the "Open Workspace" option. + Then open the c:\myHDFstuff\hdf5\examples\allexamples\allexamples.dsw + workspace. - 2. Select "Build", then Select "Set Active Configuration". + 2. Select "Build", then Select "Set Active Configuration". - On Windows platform select as the active configuration - "allexamples -- Win32 Debug" to build debug versions of the examples. - - or + On Windows platform select as the active configuration + + "allexamples -- Win32 Debug" to build debug versions of the + examples. + + or - "allexamples -- Win32 Release" to build release versions the examples. + "allexamples -- Win32 Release" to build release versions the + examples. + + On Alpha platform select as the active configuration - On Alpha platform select as the active configuration - "allexamples -- Win32 AlphaDbg" to build debug versions of the examples. + "allexamples -- Win32 AlphaDbg" to build debug versions of the + examples. - or + or - "allexamples -- Win32 AlphaRel" to build release versions the - examples. + "allexamples -- Win32 AlphaRel" to build release versions the + examples. - Select "Build" and "Build allexamples.exe" to - build the corresponding version of the examples. + Select "Build" and "Build allexamples.exe" to build the + corresponding version of the examples. - When the debug build or release build is done there should be the - following subdirectories in C:\myHDFstuff\hdf5\examples\ + When the debug build or release build is done there should be + the following subdirectories in C:\myHDFstuff\hdf5\examples\ attributetest @@ -235,70 +244,84 @@ STEP IV: BUILDING THE EXAMPLES - 3. Run the batch file "InstallExamples.bat" which resides in the top - level directory. This file creates 2 new directories, examplesREL and - examplesDBG, in the examples directory and places all the executables - in it. Both the release and debug versions of the examples should be - built before this step is done. The examples should be tested in these - 2 new directories due to some dependencies between the examples. + 3. Run the batch file "InstallExamples.bat" which resides in the + top level directory. This file creates 2 new directories, + examplesREL and examplesDBG, in the examples directory and places + all the executables in it. Both the release and debug versions of + the examples should be built before this step is done. The + examples should be tested in these 2 new directories due to some + dependencies between the examples. + - Section 2: BUILDING AN APPLICATION USING THE HDF5 LIBRARY OR DLL- SOME HELPFUL POINTERS ============================================================================ -If you are building an application that uses the HDF5 library -the following locations will need to be specified for locating -header files and linking in the HDF libraries: +If you are building an application that uses the HDF5 library the +following locations will need to be specified for locating header files +and linking in the HDF libraries: <top-level HDF5 directory>\src where <top-level HDF5 directory> may be - C:\MyHDFstuff\hdf5\ + + C:\MyHDFstuff\hdf5\ To specify this location in the settings for your VC++ project: - 1. Open your VC project in Microsoft Visual C++ and make sure it is the - active project. - 2. Go to the Project menu and chose the 'Settings' option. - 3. Chose the build configuration you would like to modify in the drop down - menu labeled with 'Settings For:' - 4. Chose the C/C++ tab - 5. At the bottom of the window, there should be a text-area labeled with - 'Project Options:'. In this text-area, scroll until you reach the end - and type /I "<top-level HDF5 directory>\src" and then click OK. + 1. Open your VC project in Microsoft Visual C++ and make sure it is + the active project. + + 2. Go to the Project menu and chose the 'Settings' option. + + 3. Chose the build configuration you would like to modify in the + drop down menu labeled with 'Settings For:' + + 4. Chose the C/C++ tab + + 5. At the bottom of the window, there should be a text-area labeled + with 'Project Options:'. In this text-area, scroll until you + reach the end and type /I "<top-level HDF5 directory>\src" and + then click OK. To link the HDF5 library with your application: - 1. Open your VC project in Microsoft Visual C++ and make sure it is the - active project. - 2. Go to the Project menu and chose the 'Add to Project' option and then - 'Files' option. - 3. Change the 'Files of type:' to 'Library Files (.lib)' - 4. Navigate through the directories until you find the location of the - hdf5.lib. - 5. Select hdf5.lib and click OK. + 1. Open your VC project in Microsoft Visual C++ and make sure it is + the active project. + + 2. Go to the Project menu and chose the 'Add to Project' option and + then 'Files' option. + + 3. Change the 'Files of type:' to 'Library Files (.lib)' + + 4. Navigate through the directories until you find the location of the + hdf5.lib. + + 5. Select hdf5.lib and click OK. To use the DLL: - 1. Follow the steps for specifing the location of the header files as shown - above. - 2. Follow the steps for linking the HDF5 library as shown above except now - link the export library that is created with the DLL. The export library - is called hdf5dll.lib. - 3. Place the DLL in a location that Windows will be able to locate it. - The search path and order for DLL's is - a) The directory where the executable module for the current process is - located. - b) The current directory. - c} The Windows system directory. The GetSystemDirectory function - retrieves the path of this directory. - d) The Windows directory. The GetWindowsDirectory function retrieves the - path of this directory. - e) The directories listed in the PATH environment variable. + 1. Follow the steps for specifing the location of the header files + as shown above. + + 2. Follow the steps for linking the HDF5 library as shown above + except now link the export library that is created with the DLL. + The export library is called hdf5dll.lib. + + 3. Place the DLL in a location that Windows will be able to locate it. + The search path and order for DLL's is + + a) The directory where the executable module for the current + process is located. + b) The current directory. + c} The Windows system directory. The GetSystemDirectory function + retrieves the path of this directory. + d) The Windows directory. The GetWindowsDirectory function + retrieves the path of this directory. + e) The directories listed in the PATH environment variable. Section 3: @@ -306,31 +329,31 @@ MORE HELPFUL POINTERS ===================== -Here are some notes that may be of help if you are not familiar -with using the Visual C++ Development Environment. +Here are some notes that may be of help if you are not familiar with +using the Visual C++ Development Environment. Project name and location issues: - The files in all.zip must end up in the hdf5\ directory - installed by hdf5-1_2_0.zip + The files in all.zip must end up in the hdf5\ directory installed by + hdf5-1_2_0.zip - If you must install all.dsw and all.dsp in another directory, relative - to hdf5\ , you will be asked to locate the sub-project files, - when you open the project all.dsw. + If you must install all.dsw and all.dsp in another directory, + relative to hdf5\ , you will be asked to locate the sub-project + files, when you open the project all.dsw. - If you want to rename all (the entire project), you will need to modify - two files all.dsw and all.dsp as text (contrary to the explicit warnings - in the files). + If you want to rename all (the entire project), you will need to + modify two files all.dsw and all.dsp as text (contrary to the + explicit warnings in the files). - You can also modify all.dsw and all.dsp as text, to allow these 2 files - to be installed in another directory. + You can also modify all.dsw and all.dsp as text, to allow these 2 + files to be installed in another directory. Settings... details: - If you create your own project, the necessary settings can be - read from the all.dsp file(as text), or from the Project Settings in - the Developer Studio project settings dialog. + If you create your own project, the necessary settings can be read + from the all.dsp file(as text), or from the Project Settings in the + Developer Studio project settings dialog. Project Settings @@ -347,33 +370,35 @@ Section 4: ZLIB LIBRARY- REMOVING OR CHANGING THE PATH ============================================ -If you would like to remove the zlib library from the hdf5 library or -use your own version of the zlib library then follow the steps below. +If you would like to remove the zlib library from the hdf5 library or use +your own version of the zlib library then follow the steps below. Removing the zlib library completely: - Open the all.dsw workspace file in Microsoft Visual C++. Go to the hdf5 - project. Select the zlib.lib file from this project and delete(press the - 'delete' key) it. Next open the H5config.h file from the src directory. - Remove the the following two lines: + Open the all.dsw workspace file in Microsoft Visual C++. Go to the + hdf5 project. Select the zlib.lib file from this project and + delete(press the 'delete' key) it. Next open the H5config.h file + from the src directory. Remove the the following two lines: + #define HAVE_LIBZ 1 #define HAVE_COMPRESS2 - then save the file. + + then save the file. - Next go to the hdf5dll project. Remove the zlib.lib from this project too. - Open the project settings for the hdf5dll project. Go to the C/C++ - settings tab and under the preprocessor definitions remove the ZLIB_DLL - in both the debug and the release settings. Recompile the all project and - then save the workspace. + Next go to the hdf5dll project. Remove the zlib.lib from this project + too. Open the project settings for the hdf5dll project. Go to the + C/C++ settings tab and under the preprocessor definitions remove the + ZLIB_DLL in both the debug and the release settings. Recompile the + all project and then save the workspace. Replacing the zlib library: - Open the all.dsw workspace and go to the hdf5 project. Delete the - zlib.lib file from the file listing. Then select the hdf5 project and - richt click to get a menu. Pick the "add files to project..." option - and find the version of the zlib that you would like to use. Then click OK - in the file chooser dialog. Repeat the steps for the hdf5dll project. - You may also want to replace the zlib.h and zconf.h files which are in - the src directory with your own versions of these files. Then recompile - the all project.
\ No newline at end of file + Open the all.dsw workspace and go to the hdf5 project. Delete the + zlib.lib file from the file listing. Then select the hdf5 project + and richt click to get a menu. Pick the "add files to project..." + option and find the version of the zlib that you would like to use. + Then click OK in the file chooser dialog. Repeat the steps for the + hdf5dll project. You may also want to replace the zlib.h and zconf.h + files which are in the src directory with your own versions of these + files. Then recompile the all project. |