diff options
| -rw-r--r-- | README.txt | 2 | ||||
| -rwxr-xr-x | configure | 18 | ||||
| -rw-r--r-- | configure.in | 2 | ||||
| -rw-r--r-- | doc/html/ADGuide/RELEASE.txt | 70 | ||||
| -rw-r--r-- | release_docs/RELEASE.txt | 2 | ||||
| -rw-r--r-- | src/H5public.h | 4 |
6 files changed, 80 insertions, 18 deletions
@@ -1,4 +1,4 @@ -HDF5 version 1.7.38 currently under development +HDF5 version 1.7.39 currently under development Please refer to the release_docs/INSTALL file for installation instructions. ------------------------------------------------------------------------------ @@ -1,7 +1,7 @@ #! /bin/sh # From configure.in Id: configure.in. # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.53 for HDF5 1.7.38. +# Generated by GNU Autoconf 2.53 for HDF5 1.7.39. # # Report bugs to <hdfhelp@ncsa.uiuc.edu>. # @@ -416,8 +416,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='HDF5' PACKAGE_TARNAME='hdf5' -PACKAGE_VERSION='1.7.38' -PACKAGE_STRING='HDF5 1.7.38' +PACKAGE_VERSION='1.7.39' +PACKAGE_STRING='HDF5 1.7.39' PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' ac_unique_file="src/H5.c" @@ -935,7 +935,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures HDF5 1.7.38 to adapt to many kinds of systems. +\`configure' configures HDF5 1.7.39 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -996,7 +996,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of HDF5 1.7.38:";; + short | recursive ) echo "Configuration of HDF5 1.7.39:";; esac cat <<\_ACEOF @@ -1146,7 +1146,7 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -HDF5 configure 1.7.38 +HDF5 configure 1.7.39 generated by GNU Autoconf 2.53 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 @@ -1161,7 +1161,7 @@ cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by HDF5 $as_me 1.7.38, which was +It was created by HDF5 $as_me 1.7.39, which was generated by GNU Autoconf 2.53. Invocation command line was $ $0 $@ @@ -34305,7 +34305,7 @@ _ASBOX } >&5 cat >&5 <<_CSEOF -This file was extended by HDF5 $as_me 1.7.38, which was +This file was extended by HDF5 $as_me 1.7.39, which was generated by GNU Autoconf 2.53. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -34367,7 +34367,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -HDF5 config.status 1.7.38 +HDF5 config.status 1.7.39 configured by $0, generated by GNU Autoconf 2.53, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" diff --git a/configure.in b/configure.in index 559db69..56fc810 100644 --- a/configure.in +++ b/configure.in @@ -25,7 +25,7 @@ dnl dnl NOTE: Don't forget to change the version number here when we do a dnl release!!! dnl -AC_INIT([HDF5], [1.7.38], [hdfhelp@ncsa.uiuc.edu]) +AC_INIT([HDF5], [1.7.39], [hdfhelp@ncsa.uiuc.edu]) AC_CONFIG_SRCDIR([src/H5.c]) AC_CONFIG_HEADER([src/H5config.h]) diff --git a/doc/html/ADGuide/RELEASE.txt b/doc/html/ADGuide/RELEASE.txt index c605a34..f20cbff 100644 --- a/doc/html/ADGuide/RELEASE.txt +++ b/doc/html/ADGuide/RELEASE.txt @@ -1,4 +1,4 @@ -HDF5 version 1.7.37 released on Sun Sep 12 04:03:26 CDT 2004 +HDF5 version 1.7.38 released on Sun Sep 26 04:46:18 CDT 2004 ================================================================================ @@ -180,10 +180,15 @@ Bug Fixes since HDF5-1.6.0 release Library ------- + - Fixed parallel bug in which some processes attempted collective + I/O while others did independent I/O. Bug appeared when some + processes used point selections, and others didn't. JRM - 2004/9/15 + - Corrected error where dataset region references were written in an + incorrect way on Cray machines. PVN & QAK - 2004/09/13 - The H5Tget_native_type now determines the native type for integers - based on the precision. This is to avoid cases of wrongly converting - an int to a short in machines that have a short of 8 bytes but with - 32bit precision (e.g Cray SV1). PVN - 2004/09/07 + based on the precision. This is to avoid cases of wrongly converting + an int to a short in machines that have a short of 8 bytes but with + 32bit precision (e.g Cray SV1). PVN - 2004/09/07 - Changed H5Dread() to not overwrite data in an application's buffer with garbage when accessing a chunked dataset with an undefined fill value and an unwritten chunk is uncountered. QAK - 2004/08/25 @@ -627,3 +632,60 @@ ftp://hdf.ncsa.uiuc.edu/pub/outgoing/hdf5/hdf5-1.6.2/F90_source_for_Crays * Information about building with PGI and Intel compilers is available in INSTALL file sections 5.7 and 5.8 + +* On at least one system, (SDSC DataStar), the scheduler (in this case + LoadLeveler) sends job status updates to standard error when you run + any executable that was compiled with the parallel compilers. + + This causes problems when running "make check" on parallel builds, as + many of the tool tests function by saving the output from test runs, + and comparing it to an exemplar. + + The best solution is to reconfigure the target system so it no longer + inserts the extra text. However, this may not be practical. + + In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to + the configure and build. This will cause "make check" to continue after + detecting errors in the tool tests. However, in the case of SDSC DataStar, + it also leaves you with some 150 "failed" tests to examine by hand. + + A second solution is to write a script to run serial tests and filter + out the text added by the scheduler. A sample script used on SDSC + DataStar is given below, but you will probably have to customize it + for your installation. + + Observe that the basic idea is to insert the script as the first item + on the command line which executes the the test. The script then + executes the test and filters out the offending text before passing + it on. + + #!/bin/csh + + set STDOUT_FILE=~/bin/serial_filter.stdout + set STDERR_FILE=~/bin/serial_filter.stderr + + rm -f $STDOUT_FILE $STDERR_FILE + + ($* > $STDOUT_FILE) >& $STDERR_FILE + + set RETURN_VALUE=$status + + cat $STDOUT_FILE + + tail +3 $STDERR_FILE + + exit $RETURN_VALUE + + You get the HDF make files and test scipts to execute your filter script + by setting the environment variable "RUNSERIAL" to the full path of the + script prior to running configure for parallel builds. Remember to + "unsetenv RUNSERIAL" before running configure for a serial build. + + Note that the RUNSERIAL environment variable exists so that we can + can prefix serial runs as necessary on the target system. On DataStar, + no prefix is necessary. However on an MPICH system, the prefix might + have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to + get the serial tests to run at all. + + In such cases, you will have to include the regular prefix in your + filter script. diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt index c2666e7..f8252c9 100644 --- a/release_docs/RELEASE.txt +++ b/release_docs/RELEASE.txt @@ -1,4 +1,4 @@ -HDF5 version 1.7.38 currently under development +HDF5 version 1.7.39 currently under development ================================================================================ diff --git a/src/H5public.h b/src/H5public.h index e24eee2..5e1242b 100644 --- a/src/H5public.h +++ b/src/H5public.h @@ -77,10 +77,10 @@ extern "C" { /* Version numbers */ #define H5_VERS_MAJOR 1 /* For major interface/format changes */ #define H5_VERS_MINOR 7 /* For minor interface/format changes */ -#define H5_VERS_RELEASE 38 /* For tweaks, bug-fixes, or development */ +#define H5_VERS_RELEASE 39 /* For tweaks, bug-fixes, or development */ #define H5_VERS_SUBRELEASE "" /* For pre-releases like snap0 */ /* Empty string for real releases. */ -#define H5_VERS_INFO "HDF5 library version: 1.7.38" /* Full version string */ +#define H5_VERS_INFO "HDF5 library version: 1.7.39" /* Full version string */ #define H5check() H5check_version(H5_VERS_MAJOR,H5_VERS_MINOR, \ H5_VERS_RELEASE) |