summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xbin/snapshot581
1 files changed, 465 insertions, 116 deletions
diff --git a/bin/snapshot b/bin/snapshot
index a496edd..081755d4 100755
--- a/bin/snapshot
+++ b/bin/snapshot
@@ -13,13 +13,14 @@
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
-# This script should be run nightly from cron. It checks out hdf5
+# This script should be run nightly from cron. It checks out the source
# from the source repository and compares it against the previous
# snapshot. If anything significant changed then a new snapshot is
# created, the minor version number is incremented, and the change is
# checked back into the source repository.
#
+
# function definitions
TIMESTAMP()
{
@@ -28,7 +29,7 @@ TIMESTAMP()
EXIT_BANNER()
{
-TIMESTAMP "Exit $PROGNAME with status=$?"
+ TIMESTAMP "Exit $PROGNAME with status=$?"
}
# Show current total disk usage.
@@ -38,11 +39,208 @@ DISKUSAGE()
( read x y; echo "Disk Usage=$x KB" )
}
+# function provided for testing software downloaded as tar files. A version of
+# this function that properly extracts the downloaded files can be provided in
+# the snapshots-${sw}-overrides file.
+EXTRACT()
+{
+ echo "Error: ${SWVERSION} is in svn repository - does not need extraction."
+}
+
+# Standard procedure for checking out or updating source code from an hdfgroup
+# git repository. Override the function for other repositories or procedures.
+SOURCE_CHECKOUT()
+{
+ if test -n $GIT_URL; then
+ if [ -n "$AUTOGEN" ]; then
+ echo "Creating fresh clone of $GIT_URL in $BASEDIR/current_src"
+ # Check out the current version from source repository.
+ (cd $BASEDIR; rm -rf current_src
+ if test -z $GIT_BRANCH; then
+ echo "Testing empty branch $GIT_BRANCH."
+ git clone $GIT_URL current_src
+ else
+ echo "Testing branch $GIT_BRANCH."
+ git clone $GIT_URL -b $GIT_BRANCH current_src
+ fi
+ ) || exit 1
+ else
+ echo "Creating fresh clone of $GIT_URL in $BASEDIR/current"
+ # Check out the current version from source repository.
+ (cd $BASEDIR; rm -rf current
+ if test -n $GIT_BRANCH; then
+ git clone $GIT_URL -b $GIT_BRANCH current
+ else
+ git clone $GIT_URL current
+ fi ) || exit 1
+ fi
+ else
+ SVNROOT=https://svn.hdfgroup.org
+ if [ -n "$AUTOGEN" ]; then
+ if [ ! -d $BASEDIR/current_src ]; then
+ mkdir -p $BASEDIR/current_src
+ echo "Checking out from $SVNROOT/${SVNVERSION} into $BASEDIR/current_src"
+ (cd $BASEDIR; svn co ${SVNROOT}/${SVNVERSION} ./current_src ) || exit 1
+ else
+ cd $BASEDIR/current_src;
+ svn -q update
+ echo "Updating $BASEDIR/current_src from svn."
+ fi
+ elif [ ! -d $BASEDIR/current ]; then
+ mkdir $BASEDIR/current
+ echo "Checking out from $SVNROOT/${SVNVERSION} into $BASEDIR/current"
+ # Check out the current version from source repository.
+ (cd $BASEDIR; svn co ${SVNROOT}/${SVNVERSION} current ) || exit 1
+ else
+ cd $BASEDIR/current; svn info
+ # "svn info" returns 0 if $BASEDIR/current was previously checked out from an
+ # svn repository - i.e. it contains .svn directories and files. If so it can
+ # be updated to the current version. If not it can be checked out from the
+ # repository.
+ if [ "$?" = 0 ];then
+ # $BASEDIR/current was checked out from an svn repository, so update
+ # to the current version.
+ svn -q update
+ echo "Updating $BASEDIR/current from svn."
+ else
+ echo "Warning! Source directory ("current") is not checked out from svn."
+ fi
+ fi
+ fi
+}
+
+# Standard procedure for running the configure command in a build (test)
+# directory
+RUNCONFIGURE()
+{
+ if [ "${CURRENT}" != "${TESTDIR}" -a "$CPSRC" = "yes" ]; then
+ echo "Copying source files to ${TESTDIR}."
+ cp -pr ${CURRENT}/* ${TESTDIR}
+ cd ${TESTDIR}
+ ./${CONFIGURE}
+ elif [ -n "${AUTOGEN}" ]; then
+ ${CURRENTSRC}/${CONFIGURE}
+ else
+ ${CURRENT}/${CONFIGURE}
+ fi
+}
+
+# Sometimes "make distclean" doesn't adequately remove files from the previous
+# build. If a build (test) directory was used, its contents can be entirely
+# deleted to provide a clean start. If the test is building in the source
+# directory, the contents can't be deleted, so run "make distclean".
+DISTCLEAN()
+{
+ if [ "${srcdir}" = "yes" -a -n "${SRCDIRNAME}" -a -d ${BASEDIR}/TestDir/${SRCDIRNAME} ]; then
+ echo "Remove contents of $SRCDIRNAME.\n"
+ rm -rf ${BASEDIR}/TestDir/${SRCDIRNAME}/*
+ else
+ echo "$MAKE distclean"
+ (cd ${TESTDIR} && ${MAKE} distclean)
+ fi
+}
+
+# Several of the software packages tested do not support make check-install.
+# Those that support it should have a version of this function in their
+# override with the following lines:
+# TIMESTAMP "check-install $1"
+# ${MAKE} check-install $1
+CHECKINSTALL()
+{
+ echo "check-install is not supported for ${SWVERSION}"
+}
+
+# Function for hdf4 and hdf5 to override to check in changes after snapshot.
+# Safety measure to avoid unintended checkins to other repositories.
+COMMITSNAPSHOT()
+{
+ echo "original hdf5 script checked code back into svn."
+}
+
+DISPLAYUSAGE()
+{
+ set -
+ cat <<EOF
+Usage: $PROGNAME [all] [checkout] [ftp <URL> [diff] [test] [srcdir] [release] [help]
+ [clean] [distclean] [echo] [deploy <dir>] [deploydir <dir>]
+ [zlib <zlib_path>] [releasedir <dir>] [srcdirname <dir>] [check-vfd]
+ [exec <command>] [module-load <module-list>] [op-configure <option>]
+ [--<option>]
+ all: Run all commands (checkout, test & release)
+ [Default is all]
+ checkout: Run source checkout
+ diff: Run diff on current and previous versions. Exit 0 if
+ no significant differences are found. Otherwise, non-zero.
+ deploy: deploy binary to directory <dir>
+ deploydir: use <dir> as the default directory for deployment
+ test: Run test
+ release: Run release
+ clean: Run make clean
+ distclean:Run make distclean
+ echo: Turn on echo mode (set -x)
+ setenv <name> <value>:
+ Set environment variable <name> to <value>.
+ setenvN <N> <name> <value> ...:
+ Set environment variable with <N> values.
+ E.g., setenvN 3 x a b c is same as setenv x="a b c".
+ srcdir: Use srcdir option (does not imply other commands)
+ "snapshot srcdir" is equivalent to "snapshot srcdir all"
+ "snapshot srcdir checkout" is equivalent to "snapshot checkout"
+ srcdirname <dir>:
+ Use <dir> as the srcdir testing directory if srcdir is choosen.
+ If <dir> starts with '-', it is append to the default name
+ E.g., "snapshot srcdir srcdirname -xx" uses hostname-xx
+ [Default is hostname]
+ help: Print this message
+ echo: Turn on shell echo
+ zlib <zlib_path>:
+ Use <zlib_path> as the ZLIB locations
+ [Default is $ZLIB_default]
+ releasedir <dir>:
+ Use <dir> as the release directory
+ [Default is $ReleaseDir_default]
+ check-vfd:
+ Run make check-vfd instead of just make check.
+ exttest <testscript>;
+ Run testscript;
+ exec <command>:
+ Run <command>;
+ module-load <module-list>:
+ Load modules in comma-separated <module-list>;
+ op-configure <option>:
+ Pass <option> to the configure command
+ E.g., "snapshot op-configure --enable-parallel"
+ configures for parallel mode
+ --<option>:
+ Pass --<option> to the configure command
+ E.g., "snapshot --enable-parallel"
+ configures for parallel mode
+EOF
+ exit $errcode
+}
# MAIN
# SGI /bin/sh replaces $0 as function name if used in a function.
# Set the name here to avoid that ambiguity and better style too.
PROGNAME=$0
+SNAPSHOTNAME=
+HDFREPOS=
+DOCVERSION=""
+MODULELIST=""
+
+if [ -f bin/snapshot_params ]; then
+ . bin/snapshot_params
+ echo "Added snapshot_params."
+fi
+if [ -z "$SWVER" -a -f bin/snapshot_version ]
+then
+ . bin/snapshot_version
+ echo "Added snapshot_version."
+fi
+if [ -n ${HDFREPOS} -a -f bin/snapshot-${HDFREPOS}-overrides ]; then
+ . bin/snapshot-${HDFREPOS}-overrides
+ echo "Added snapshot-${HDFREPOS}-overrides."
+fi
echo "====================================="
echo "$PROGNAME $*"
@@ -51,7 +249,7 @@ TIMESTAMP MAIN
uname -a
# setup exit banner message
-trap EXIT_BANNER 0
+trap EXIT_BANNER 0 1 2 9 15
# Dump environment variables before option parsing
echo ===Dumping environment variables before option parsing ===
@@ -67,8 +265,14 @@ ReleaseDir_default=release_dir
ZLIB_default=
ZLIB=$ZLIB_default
-# What compression methods to use?
-METHODS="gzip zip bzip2 doc"
+# What compression methods to use? (md5 does checksum). Doc was apparently
+# added as a compression method to create a separate tarfile containing the
+# documentation files for v 1.8 and above.
+if [ "${SWVERSION}" = "hdf5_1_6" ]; then
+ METHODS="gzip bzip2 md5"
+else
+ METHODS="gzip bzip2 doc"
+fi
# Use User's MAKE if set. Else use generic make.
MAKE=${MAKE:-make}
@@ -81,15 +285,38 @@ CHECKVAL=check
cmd="all"
test_opt=""
errcode=0
+AUTOGEN=""
+EXTTEST=""
+EXEC_CMD_ARG=""
while [ $# -gt 0 ] ; do
case "$1" in
all)
cmd="all"
;;
+ checkout-autogen)
+ cmdcheckout="checkout"
+ AUTOGEN="autogen"
+ cmd=""
+ ;;
checkout)
cmdcheckout="checkout"
cmd=""
;;
+ ftp)
+ echo "Setting ftp flags in snapshot script"
+ cmdcheckout="checkout"
+ cmdftp="ftp"
+ cmd=""
+ shift
+ if [ $# -lt 1 ]; then
+ echo "URL missing"
+ errcode=1
+ cmd="help"
+ break
+ fi
+ ftp_url="$1"
+ echo "ftp_url is $ftp_url"
+ ;;
diff)
cmddiff="diff"
cmd=""
@@ -164,6 +391,10 @@ while [ $# -gt 0 ] ; do
cmdrel="release"
cmd=""
;;
+ autogen-release)
+ cmdrel="autogen-release"
+ cmd=""
+ ;;
clean | distclean)
cmdclean="$1"
cmd=""
@@ -196,12 +427,43 @@ while [ $# -gt 0 ] ; do
fi
ReleaseDir="$1"
;;
+ exttest)
+ shift
+ if [ $# -lt 1 ]; then
+ echo "exttest script name missing"
+ errcode=1
+ cmd="help"
+ break
+ fi
+ cmd=""
+ EXTTEST="$1"
+ ;;
+ exec)
+ shift
+ if [ $# -lt 1 ]; then
+ echo "exec command name missing"
+ errcode=1
+ cmd="help"
+ break
+ fi
+ cmd=""
+ EXEC_CMD_ARG="$@"
+ # exit the parsing while loop since all arguments have been consummed.
+ break
+ ;;
check-vfd)
CHECKVAL=check-vfd
;;
- yodconfigure)
- YODCONFIGURE=yes
- ;;
+ module-load)
+ shift
+ if [ $# -lt 1 ]; then
+ echo "missing module list to load"
+ errcode=1
+ cmd="help"
+ break
+ fi
+ MODULELIST="$1"
+ ;;
--*)
OP_CONFIGURE="$OP_CONFIGURE $1"
;;
@@ -225,87 +487,39 @@ while [ $# -gt 0 ] ; do
shift
done
+if [ -n "$MODULELIST" ]; then
+ . ~/.bashrc
+ module use /opt/pkgs/modules/all
+ # load module command will take a space separated list of modules.
+ # If we have a comma separated list, convert ',' to ' '.
+ MODULELIST="$( echo -e "$MODULELIST" | tr ',' ' ' )"
+ module load $MODULELIST
+fi
+
# Dump environment variables after option parsing
echo ===Dumping environment variables after option parsing ===
printenv | sort
echo ===Done Dumping environment variables after option parsing ===
if [ "$cmd" = help ]; then
- set -
- cat <<EOF
-Usage: $PROGNAME [all] [checkout] [diff] [test] [srcdir] [release] [help]
- [clean] [distclean] [echo] [deploy <dir>] [deploydir <dir>]
- [zlib <zlib_path>] [releasedir <dir>] [srcdirname <dir>] [check-vfd]
- [op-configure <option>] [--<option>]
- all: Run all commands (checkout, test & release)
- [Default is all]
- checkout: Run source checkout
- diff: Run diff on current and previous versions. Exit 0 if
- no significant differences are found. Otherwise, non-zero.
- deploy: deploy binary to directory <dir>
- deploydir: use <dir> as the default directory for deployment
- test: Run test
- release: Run release
- clean: Run make clean
- distclean:Run make distclean
- echo: Turn on echo mode (set -x)
- setenv <name> <value>:
- Set environment variable <name> to <value>.
- setenvN <N> <name> <value> ...:
- Set environment variable with <N> values.
- E.g., setenvN 3 x a b c is same as setenv x="a b c".
- srcdir: Use srcdir option (does not imply other commands)
- "snapshot srcdir" is equivalent to "snapshot srcdir all"
- "snapshot srcdir checkout" is equivalent to "snapshot checkout"
- srcdirname <dir>:
- Use <dir> as the srcdir testing directory if srcdir is choosen.
- If <dir> starts with '-', it is append to the default name
- E.g., "snapshot srcdir srcdirname -xx" uses hostname-xx
- [Default is hostname]
- help: Print this message
- echo: Turn on shell echo
- zlib <zlib_path>:
- Use <zlib_path> as the ZLIB locations
- [Default is $ZLIB_default]
- releasedir <dir>:
- Use <dir> as the release directory
- [Default is $ReleaseDir_default]
- check-vfd:
- Run make check-vfd instead of just make check.
- op-configure <option>:
- Pass <option> to the configure command
- E.g., "snapshot op-configure --enable-parallel"
- configures for parallel mode
- --<option>:
- Pass --<option> to the configure command
- E.g., "snapshot --enable-parallel"
- configures for parallel mode
-EOF
- exit $errcode
+ DISPLAYUSAGE
fi
# Setup the proper configure option (--with-zlib) to use zlib library
# provide ZLIB is non-empty.
ZLIB=${ZLIB:+"--with-zlib="$ZLIB}
-if [ -n "$YODCONFIGURE" ]; then
- cp configure configure.yod
- bin/yodconfigure configure.yod
- CONFIGURE="./configure.yod"
-else
- CONFIGURE="./configure"
+# Adding --prefix as a configure option will put the path to the deploy
+# directory in the initial libhdf5*.la files
+if [ -n "$DEPLOYDIRNAME" ]; then
+ OP_CONFIGURE="$OP_CONFIGURE --prefix=${deploydir}/${DEPLOYDIRNAME}"
fi
-CONFIGURE="$CONFIGURE $ZLIB $OP_CONFIGURE"
+CONFIGURE="configure $OP_CONFIGURE"
+# echo "Configure command is $CONFIGURE"
# Execute the requests
snapshot=yes
-if [ -f bin/snapshot_version ]; then
- . bin/snapshot_version
-else
- H5VERSION=hdf5
-fi
-
-BASEDIR=${HOME}/snapshots-${H5VERSION}
+BASEDIR=${HOME}/snapshots-${SNAPSHOTNAME}
if [ ! -d ${BASEDIR} ]; then
echo "BASEDIR ($BASEDIR) does not exist"
exit 1
@@ -315,10 +529,10 @@ CURRENT=${BASEDIR}/current
PREVIOUS=${BASEDIR}/previous
ReleaseDir=${ReleaseDir:=${BASEDIR}/${ReleaseDir_default}}
HOSTNAME=`hostname | cut -f1 -d.` # no domain part
-if [ $H5VERSION != hdf5 ]; then
- SVNVERSION="hdf5/branches/$H5VERSION"
+if [ "${SWVERSION}" != "${HDFREPOS}" ]; then
+ SVNVERSION="$HDFREPOS/$SWVERSION"
else
- SVNVERSION=hdf5/trunk # use the default (trunk) version
+ SVNVERSION="$HDFREPOS/trunk" # use the default (trunk) version
fi
# Try finding a version of diff that supports the -I option too.
@@ -333,19 +547,48 @@ done
#=============================
if [ "$cmd" = "all" -o -n "$cmdcheckout" ]; then
TIMESTAMP "checkout"
- # If there is a Makefile in ${CURRENT}, the last test done in it
- # has not been distclean'ed. They would interfere with other
- # --srcdir build since make considers the files in ${CURRENT}
- # take precedence over files in its own build-directory. Run
- # a "make distclean" to clean them all out. This is not really
- # part of the "checkout" functions but this is the most convenient
- # spot to do the distclean. We will also continue the checkout process
- # regardless of the return code of distclean.
- ( cd ${CURRENT}; test -f Makefile && ${MAKE} distclean)
-
- SVNROOT=http://svn.hdfgroup.uiuc.edu
- # Check out the current version from source repository.
- (cd $BASEDIR; svn -q co ${SVNROOT}/${SVNVERSION} current ) || exit 1
+ # ${BASEDIR}/bin is now updated from svn by EveningMaint or DailyMaint
+ # to avoid updating the scripts in ${BASEDIR}/bin while they are running.
+
+ if [ -z "$AUTOGEN" ]; then
+ # If there is a Makefile in ${CURRENT}, the last test done in it
+ # has not been distclean'ed. They would interfere with other
+ # --srcdir build since make considers the files in ${CURRENT}
+ # take precedence over files in its own build-directory. Run
+ # a "make distclean" to clean them all out. This is not really
+ # part of the "checkout" functions but this is the most convenient
+ # spot to do the distclean. We will also continue the checkout process
+ # regardless of the return code of distclean.
+ ( cd ${CURRENT}; test -f Makefile && ${MAKE} distclean)
+ fi
+ # echo "cmdftp is $cmdftp; ftp_url is $ftp_url"
+ if [ -n "$cmdftp" ]; then
+ echo "Get the NetCDF4 source from their ftp server."
+ echo "Command executed is: 2>&1 wget -N $ftp_url"
+ cd ${BASEDIR};
+ WGET_OUTPUT="`2>&1 wget -N $ftp_url`"
+ errcode=$?
+ if [[ $errcode -ne 0 ]]; then
+ exit $errcode
+ fi
+
+ if [ $? -ne 0 ];then
+ echo $0: "$WGET_OUTPUT" Exiting.
+ exit 1
+ fi
+
+ # echo "Wget output was $WGET_OUTPUT"
+
+ if echo "$WGET_OUTPUT" | fgrep 'not retrieving' &> /dev/null
+ then
+ echo "Snapshot unchanged"
+ else
+ echo "New snapshot downloaded"
+ EXTRACT
+ fi
+ else
+ SOURCE_CHECKOUT
+ fi
fi # Do source checkout
@@ -353,7 +596,7 @@ fi # Do source checkout
# Run Test the HDF5 library
#=============================
if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then
- TIMESTAMP "diff"
+ TIMESTAMP "Run Tests"
# setup if srcdir is used.
if [ -z "$srcdir" ]; then
TESTDIR=${CURRENT}
@@ -369,10 +612,15 @@ if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then
esac
TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME}
test -d ${TESTDIR} || mkdir ${TESTDIR}
+ # set TESTDIR to use the direct path to the local test directory
+ # rather than the path through ${BASEDIR}.
+ cd ${TESTDIR}
+ TESTDIR=`pwd -P`
+ cd ${CURRENT}
fi
# Make sure current version exists and is clean
if [ -d ${TESTDIR} ]; then
- (cd ${TESTDIR} && ${MAKE} distclean)
+ DISTCLEAN
else
errcode=$?
snapshot=no
@@ -382,12 +630,17 @@ if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then
# Compare it with the previous version. Compare only files listed in
# the MANIFEST plus the MANIFEST itself.
if [ -d ${PREVIOUS} ]; then
- if (${DIFF} -c ${PREVIOUS}/MANIFEST ${CURRENT}/MANIFEST); then
+ if [ -z "${AUTOGEN}" ]; then
+ CURRENTSRC=${CURRENT}
+ else
+ CURRENTSRC=${BASEDIR}/current_src
+ fi
+ if (${DIFF} -c ${PREVIOUS}/MANIFEST ${CURRENTSRC}/MANIFEST); then
snapshot=no
- for src in `grep '^\.' ${CURRENT}/MANIFEST|expand|cut -f1 -d' '`; do
+ for src in `grep '^\.' ${CURRENTSRC}/MANIFEST|expand|cut -f1 -d' '`; do
if ${DIFF} -I H5_VERS_RELEASE -I " released on " \
-I " currently under development" \
- ${PREVIOUS}/$src ${CURRENT}/$src
+ ${PREVIOUS}/$src ${CURRENTSRC}/$src
then
: #continue
else
@@ -408,44 +661,123 @@ if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then
fi
fi
+ #=============================
+ # Execute command if defined
+ #=============================
+ #echo BEFORE EXEC command
+ #echo EXEC_CMD_ARG=${EXEC_CMD_ARG}
+
+ if [ -n "$EXEC_CMD_ARG" ]; then
+ TIMESTAMP ${EXEC_CMD_ARG}
+ TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME}
+ test -d ${TESTDIR} || mkdir ${TESTDIR}
+ if cd ${TESTDIR}; then
+ # clean up the directory before executing the command
+ # Do we need to clean first?
+ # rm -rf *
+ #
+ # If EXEC_CMD_ARG starts with a '/', it has an absolute path, else it is
+ # relative to the BASEDIR.
+ case "$EXEC_CMD_ARG" in
+ /*)
+ ${EXEC_CMD_ARG}
+ ;;
+ *)
+ ${BASEDIR}/${EXEC_CMD_ARG}
+ ;;
+ esac
+ errcode=$?
+ else
+ echo "${TESTDIR} not accessible"
+ errcode=1
+ fi
+ # exit snapshot since nothing else to do, for now.
+ exit $errcode
+ fi
+
# Build, run tests and install procedures
- if [ "$snapshot" = "yes" ]; then
+ if [ "$snapshot" = "yes" ] && [ "$NOMAKE" != "yes" ]; then
+ FAIL_SECTION=""
+ if [ -f ${TESTDIR}/failsection ]; then
+ rm ${TESTDIR}/failsection
+ fi
if (cd ${TESTDIR} && \
- TIMESTAMP "configure" && \
- ${srcdir:+${CURRENT}/}${CONFIGURE} && \
- TIMESTAMP "make" && \
+ TIMESTAMP "configure" && echo "configure" > ${TESTDIR}/failsection && \
+ RUNCONFIGURE && \
+ sleep 2 && \
+ TIMESTAMP "make" && echo "make" > ${TESTDIR}/failsection && \
${MAKE} && DISKUSAGE \
- TIMESTAMP ${CHECKVAL} && \
+ TIMESTAMP ${CHECKVAL} && echo "make check" > ${TESTDIR}/failsection && \
${MAKE} ${CHECKVAL} && DISKUSAGE \
- TIMESTAMP "install" && \
- ${MAKE} install-all && DISKUSAGE \
- TIMESTAMP "check-install" && \
- ${MAKE} check-install && DISKUSAGE \
- TIMESTAMP "uninstall" && \
- ${MAKE} uninstall-all && DISKUSAGE); then
+ TIMESTAMP "install" && echo "make install" > ${TESTDIR}/failsection && \
+ ${MAKE} install && DISKUSAGE \
+ TIMESTAMP "check-install" && echo "make check-install" > ${TESTDIR}/failsection && \
+ CHECKINSTALL && DISKUSAGE \
+ TIMESTAMP "uninstall" && echo "make uninstall" > ${TESTDIR}/failsection && \
+ ${MAKE} uninstall && DISKUSAGE); then
:
else
errcode=$?
+ FAIL_SECTION=`cat ${TESTDIR}/failsection`
+ echo "Failed running ${FAIL_SECTION}"
snapshot=no
exit $errcode
fi
+ elif [ $CPSRC ]; then
+ cp -pr ${CURRENT}/* ${TESTDIR}
+ else
+ cmdclean=""
fi
fi # Test the HDF5 library
+# Run external test if configured
#=============================
+#=============================
+#if [ -d "$CURRENT" ]; then
+if [ "$EXTTEST" != "" ]; then
+ TIMESTAMP ${EXTTEST}
+ TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME}
+ test -d ${TESTDIR} || mkdir ${TESTDIR}
+ cd ${TESTDIR}
+ sleep 1
+ TIMESTAMP $pwd
+ ls
+ ${BASEDIR}/${EXTTEST}
+ errcode=$?
+ exit $errcode
+fi
+
+#=============================
# Run deployment if requested.
#=============================
if [ -n "$DEPLOYDIRNAME" ]; then
+ # The daily tests deploy to .../hdf5/... or .../hdf4/... except on cobalt where the
+ # deploy directory is in .../HDF5/... lc will take care of this. If hdf4 or hdf5
+ # either upper or lower case isn't in the path, RELEASE.txt won't be found unless
+ # it is in $CURRENT.
+ POS4=`perl -e "print index(lc(\"${deploydir}/${DEPLOYDIRNAME}\"), 'hdf4')"`
+ POS5=`perl -e "print index(lc(\"${deploydir}/${DEPLOYDIRNAME}\"), 'hdf5')"`
+ if [ "${POS4}" -ge "0" ]; then
+ RELEASE_TXT_LOC="release_notes"
+ elif [ "${POS5}" -ge "0" ]; then
+ RELEASE_TXT_LOC="release_docs"
+ else
+ RELEASE_TXT_LOC=""
+ fi
+
if [ "$snapshot" = "yes" ]; then
TIMESTAMP "deploy"
if (cd ${TESTDIR} &&
- ${CURRENT}/bin/deploy ${deploydir}/${DEPLOYDIRNAME} && \
+ ${BASEDIR}/bin/deploy ${deploydir}/${DEPLOYDIRNAME} && \
TIMESTAMP "clean" && \
${MAKE} clean && \
TIMESTAMP "check-install prefix=${deploydir}/${DEPLOYDIRNAME}" && \
- ${MAKE} check-install prefix=${deploydir}/${DEPLOYDIRNAME}); then
- : #continue
+ CHECKINSTALL prefix=${deploydir}/${DEPLOYDIRNAME}); then
+ cd ${CURRENT}
+ cp ${RELEASE_TXT_LOC}/RELEASE.txt ${deploydir}/${DEPLOYDIRNAME}
+ cp COPYING ${deploydir}/${DEPLOYDIRNAME}
+ #: #continue
else
errcode=$?
exit $errcode
@@ -460,17 +792,34 @@ fi # Deploy
if [ "$cmd" = "all" -o -n "$cmdrel" ]; then
if [ "$snapshot" = "yes" ]; then
TIMESTAMP "release"
- (cd ${CURRENT} && ${MAKE} distclean)
+ DISTCLEAN
(
# Turn on exit on error in the sub-shell so that it does not
# commit source if errors encounter here.
set -e
- cd ${CURRENT}
- RELEASE_VERSION="`perl bin/h5vers -v`"
- echo "Making snapshot release ($RELEASE_VERSION) to ${ReleaseDir}..."
- bin/release -d $ReleaseDir $METHODS
- perl bin/h5vers -i
- svn -q commit -m "Snapshot $RELEASE_VERSION"
+ if [ "$cmdrel" = "autogen-release" ]; then
+ cd ${BASEDIR}/current_src
+ else
+ cd ${CURRENT}
+ fi
+ if [ "$HDFREPOS" = "hdf4" ]; then
+ RELEASE_VERSION="`perl bin/h4vers -v`"
+ echo "Making snapshot release ($RELEASE_VERSION) to ${ReleaseDir}..."
+ bin/release -d $ReleaseDir $METHODS
+ perl bin/h4vers -i
+ elif [ "$HDFREPOS" = "hdf5" ]; then
+ RELEASE_VERSION="`perl bin/h5vers -v`"
+ echo "Making snapshot release ($RELEASE_VERSION) to ${ReleaseDir}..."
+ if [ "${DOCVERSION}" ]; then
+ bin/release -d $ReleaseDir --docver ${DOCVERSION} $METHODS
+ else
+ bin/release -d $ReleaseDir $METHODS
+ fi
+ perl bin/h5vers -i
+ else
+ echo "need real release steps. For now, only move current version to previous"
+ fi
+ COMMITSNAPSHOT
)
errcode=$?
fi
@@ -487,7 +836,7 @@ fi #Release snapshot
#=============================
# Clean the test area. Default is no clean.
#=============================
-if [ -n "$cmdclean" ]; then
+if [ -n "$cmdclean" ] && [ "$NOMAKE" != "yes" ]; then
TIMESTAMP "clean"
# setup if srcdir is used.
if [ -z "$srcdir" ]; then