summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MANIFEST1
-rw-r--r--config/intel-osf1180
-rw-r--r--perform/pio_engine.c5
-rw-r--r--release_docs/RELEASE.txt13
-rw-r--r--test/h5test.c5
-rw-r--r--tools/h5copy/testh5copy.sh12
-rwxr-xr-xtools/h5diff/testh5diff.sh9
-rw-r--r--tools/h5dump/testh5dump.sh.in16
-rw-r--r--tools/h5ls/h5ls.c3
-rwxr-xr-xtools/h5repack/h5repack.sh.in57
10 files changed, 25 insertions, 276 deletions
diff --git a/MANIFEST b/MANIFEST
index 489baab..16714aa 100644
--- a/MANIFEST
+++ b/MANIFEST
@@ -93,7 +93,6 @@
./config/ia64-linux-gnu
./config/intel-fflags
./config/intel-flags
-./config/intel-osf1
./config/irix5.x
./config/irix6.x
./config/linux-gnu
diff --git a/config/intel-osf1 b/config/intel-osf1
deleted file mode 100644
index 27d89cf..0000000
--- a/config/intel-osf1
+++ /dev/null
@@ -1,180 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script. It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# This is for the ASCI RED TFLOPS machine
-
-# The default compiler is `cicc'
-if test "X-" = "X-$CC"; then
- CC=cicc
- CC_BASENAME=cicc
-fi
-
-# The default archiver is `xar'
-AR=${AR:-xar}
-
-# There is no ranlib
-RANLIB=:
-
-# Additional libraries
-LIBS="$LIBS -lnoop_stubs"
-
-# How to run serial and parallel test programs
-# Default parallel tests can fit within 1 processor in -proc 3 mode.
-# You may want to use -proc 3 to use fewer physical nodes.
-RUNSERIAL=${RUNSERIAL:-"yod -sz 1"}
-RUNPARALLEL=${RUNPARALLEL:-"yod -sz 8"}
-
-# CFLAGS must be set else configure set it to -g
-CFLAGS="$CFLAGS"
-
-# What must *always* be present for things to compile correctly?
-# -DH5_TFLOPS: for the Sandia Tflops machine. Had used the builtin
-# __PUMAGON__ but H5_TFLOPS is more meaningful.
-CPPFLAGS="$CPPFLAGS -DH5_TFLOPS"
-
-# What compiler flags should be used for code development?
-DEBUG_CFLAGS=-g
-DEBUG_CPPFLAGS=
-
-# What compiler flags should be used for building a production
-# library?
-PROD_CFLAGS=-O
-PROD_CPPFLAGS=
-
-# What compiler flags enable code profiling?
-PROFILE_CFLAGS=-pg
-PROFILE_CPPFLAGS=
-
-# Turn off shared lib option. It does not work for TFLOPS yet.
-enable_shared="${enable_shared:-no}"
-
-# Disable stream-vfd option. It does not work for TFLOPS.
-enable_stream_vfd="${enable_stream_vfd:-no}"
-
-# Set this to the width required by printf() to print type `long
-# long'. For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# Cache the sizeof of the following types to save configure time.
-# These are verified in test/tconfig in case they change.
-ac_cv_type_char=${ac_cv_type_char=yes}
-ac_cv_sizeof_char=${ac_cv_sizeof_char='1'}
-ac_cv_type_short=${ac_cv_type_short=yes}
-ac_cv_sizeof_short=${ac_cv_sizeof_short='2'}
-ac_cv_type_int=${ac_cv_type_int=yes}
-ac_cv_sizeof_int=${ac_cv_sizeof_int='4'}
-ac_cv_type_long=${ac_cv_type_long=yes}
-ac_cv_sizeof_long=${ac_cv_sizeof_long='4'}
-ac_cv_type_float=${ac_cv_type_float=yes}
-ac_cv_sizeof_float=${ac_cv_sizeof_float='4'}
-ac_cv_type_double=${ac_cv_type_double=yes}
-ac_cv_sizeof_double=${ac_cv_sizeof_double='8'}
-ac_cv_type_long_double=${ac_cv_type_long_double=yes}
-ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double='8'}
-ac_cv_type_long_long=${ac_cv_type_long_long=yes}
-ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long='8'}
-ac_cv_type_size_t=${ac_cv_type_size_t=yes}
-ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t='4'}
-ac_cv_type_ssize_t=${ac_cv_type_ssize_t=yes}
-ac_cv_sizeof_ssize_t=${ac_cv_sizeof_ssize_t='4'}
-ac_cv_type_off_t=${ac_cv_type_off_t=yes}
-ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t='4'}
-
-# Hard set sizeof of the following types to 0 because they are not supported.
-ac_cv_type___int64=${ac_cv_type___int64=no}
-ac_cv_sizeof___int64=${ac_cv_sizeof___int64='0'}
-
-# Hard set malloc of zero bytes to no because it does not work.
-hdf5_cv_malloc_works=${hdf5_cv_malloc_works='no'}
-
-# Hard set sizeof_intN_t to 0 because they are not supported.
-ac_cv_type_int8_t=${ac_cv_type_int8_t=no}
-ac_cv_type_int16_t=${ac_cv_type_int16_t=no}
-ac_cv_type_int32_t=${ac_cv_type_int32_t=no}
-ac_cv_type_int64_t=${ac_cv_type_int64_t=no}
-ac_cv_type_uint8_t=${ac_cv_type_uint8_t=no}
-ac_cv_type_uint16_t=${ac_cv_type_uint16_t=no}
-ac_cv_type_uint32_t=${ac_cv_type_uint32_t=no}
-ac_cv_type_uint64_t=${ac_cv_type_uint64_t=no}
-ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t='0'}
-ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t='0'}
-ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t='0'}
-ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t='0'}
-ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t='0'}
-ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t='0'}
-ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t='0'}
-ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t='0'}
-
-# Hard set sizeof_int_leastN_t to 0 because they are not supported.
-ac_cv_type_int_least8_t=${ac_cv_type_int_least8_t=no}
-ac_cv_type_int_least16_t=${ac_cv_type_int_least16_t=no}
-ac_cv_type_int_least32_t=${ac_cv_type_int_least32_t=no}
-ac_cv_type_int_least64_t=${ac_cv_type_int_least64_t=no}
-ac_cv_type_uint_least8_t=${ac_cv_type_uint_least8_t=no}
-ac_cv_type_uint_least16_t=${ac_cv_type_uint_least16_t=no}
-ac_cv_type_uint_least32_t=${ac_cv_type_uint_least32_t=no}
-ac_cv_type_uint_least64_t=${ac_cv_type_uint_least64_t=no}
-ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t='0'}
-ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t='0'}
-ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t='0'}
-ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t='0'}
-ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t='0'}
-ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t='0'}
-ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t='0'}
-ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t='0'}
-
-# Hard set sizeof_int_fastN_t to 0 because they are not supported.
-ac_cv_type_int_fast8_t=${ac_cv_type_int_fast8_t=no}
-ac_cv_type_int_fast16_t=${ac_cv_type_int_fast16_t=no}
-ac_cv_type_int_fast32_t=${ac_cv_type_int_fast32_t=no}
-ac_cv_type_int_fast64_t=${ac_cv_type_int_fast64_t=no}
-ac_cv_type_uint_fast8_t=${ac_cv_type_uint_fast8_t=no}
-ac_cv_type_uint_fast16_t=${ac_cv_type_uint_fast16_t=no}
-ac_cv_type_uint_fast32_t=${ac_cv_type_uint_fast32_t=no}
-ac_cv_type_uint_fast64_t=${ac_cv_type_uint_fast64_t=no}
-ac_cv_sizeof_int_fast8_t=${ac_cv_sizeof_int_fast8_t='0'}
-ac_cv_sizeof_int_fast16_t=${ac_cv_sizeof_int_fast16_t='0'}
-ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t='0'}
-ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t='0'}
-ac_cv_sizeof_uint_fast8_t=${ac_cv_sizeof_uint_fast8_t='0'}
-ac_cv_sizeof_uint_fast16_t=${ac_cv_sizeof_uint_fast16_t='0'}
-ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t='0'}
-ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t='0'}
-
-hdf5_cv_system_scope_threads=${hdf5_cv_system_scope_threads="no"}
-
-# Hard set MPI_File_set_size() working for files over 2GB to no
-hdf5_cv_mpi_file_set_size_big=${hdf5_cv_mpi_file_set_size_big='no'}
-
-# Hard set variables for v1.7 and higher.
-# Set gettimeofday_tz to yes.
-hdf5_cv_gettimeofday_tz=${hdf5_cv_gettimeofday_tz='yes'}
-hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'}
-hdf5_cv_fp_to_ullong_bottom_bit_works=${hdf5_cv_fp_to_ullong_bottom_bit_works='no'}
-hdf5_cv_fp_to_ullong_right_maximum=${hdf5_cv_fp_to_ullong_right_maximum='yes'}
-hdf5_cv_ldouble_to_uint_works=${hdf5_cv_ldouble_to_uint_works='yes'}
-hdf5_cv_sw_ldouble_to_integer_works=${hdf5_cv_sw_ldouble_to_integer_works='yes'}
-hdf5_cv_sw_ulong_to_fp_bottom_bit_works=${hdf5_cv_sw_ulong_to_fp_bottom_bit_works='no'}
-hdf5_cv_ullong_to_fp_cast_works=${hdf5_cv_ullong_to_fp_cast_works='yes'}
-hdf5_cv_ullong_to_ldouble_precision_works=${hdf5_cv_ullong_to_ldouble_precision_works='yes'}
-hdf5_cv_fp_to_integer_overflow_works=${hdf5_cv_fp_to_integer_overflow_works='yes'}
diff --git a/perform/pio_engine.c b/perform/pio_engine.c
index c5214d3..a70ddc3 100644
--- a/perform/pio_engine.c
+++ b/perform/pio_engine.c
@@ -107,12 +107,7 @@ static int clean_file_g = -1; /*whether to cleanup temporary test */
* is about the best guess.
*/
#ifndef HDF5_PARAPREFIX
-# ifdef __PUMAGON__
-/* For the PFS of TFLOPS */
-# define HDF5_PARAPREFIX "pfs:/pfs_grande/multi/tmp_1"
-# else
# define HDF5_PARAPREFIX ""
-# endif /* __PUMAGON__ */
#endif /* !HDF5_PARAPREFIX */
#ifndef MIN
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt
index 5bf22f0..7ab8067 100644
--- a/release_docs/RELEASE.txt
+++ b/release_docs/RELEASE.txt
@@ -315,6 +315,8 @@ Bug Fixes since HDF5-1.8.0 release
Configuration
-------------
+ - Support for TFLOPS, config/intel-osf1, is removed since the TFLOPS
+ machine has long retired. AKC - 2009/10/06.
- Added $(EXEEXT) extension to H5detect when it's executed in the
src/Makfile to generate H5Tinit.c so it works correctly on platforms
that require the full extension when running executables.
@@ -712,17 +714,6 @@ Known Problems
This warning is innocuous and can be safely ignored.
-
-* The Stream VFD was not tested yet under Windows. It is not supported
- in the TFLOPS machine.
-
-
-* The ./dsets tests failed in the TFLOPS machine if the test program,
- dsets.c, is compiled with the -O option. The hdf5 library still works
- correctly with the -O option. The test program works fine if it is
- compiled with -O1 or -O0. Only -O (same as -O2) causes the test
- program to fail.
-
* Certain platforms give false negatives when testing h5ls:
- Cray J90 and Cray T90IEEE give errors during testing when displaying
some floating-point values. These are benign differences due to
diff --git a/test/h5test.c b/test/h5test.c
index 360f1d9..03e857f 100644
--- a/test/h5test.c
+++ b/test/h5test.c
@@ -64,13 +64,8 @@
* is about the best guess.
*/
#ifndef HDF5_PARAPREFIX
-#ifdef __PUMAGON__
-/* For the PFS of TFLOPS */
-#define HDF5_PARAPREFIX "pfs:/pfs_grande/multi/tmp_1"
-#else
#define HDF5_PARAPREFIX ""
#endif
-#endif
char *paraprefix = NULL; /* for command line option para-prefix */
#ifdef H5_HAVE_PARALLEL
MPI_Info h5_io_info_g=MPI_INFO_NULL;/* MPI INFO object for IO */
diff --git a/tools/h5copy/testh5copy.sh b/tools/h5copy/testh5copy.sh
index c1d0309..c374e08 100644
--- a/tools/h5copy/testh5copy.sh
+++ b/tools/h5copy/testh5copy.sh
@@ -167,11 +167,7 @@ TOOLTEST_FAIL()
H5DIFFTEST()
{
VERIFY $@
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- $RUNSERIAL $H5DIFF_BIN -q $@
- else
- $RUNSERIAL $H5DIFF_BIN -q "$@"
- fi
+ $RUNSERIAL $H5DIFF_BIN -q "$@"
RET=$?
if [ $RET != 0 ] ; then
echo "*FAILED*"
@@ -186,11 +182,7 @@ H5DIFFTEST()
H5DIFFTEST_FAIL()
{
VERIFY $@
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- $RUNSERIAL $H5DIFF_BIN -q $@
- else
- $RUNSERIAL $H5DIFF_BIN -q "$@"
- fi
+ $RUNSERIAL $H5DIFF_BIN -q "$@"
RET=$?
if [ $RET != 1 ] ; then
diff --git a/tools/h5diff/testh5diff.sh b/tools/h5diff/testh5diff.sh
index 005a736..d6550fd 100755
--- a/tools/h5diff/testh5diff.sh
+++ b/tools/h5diff/testh5diff.sh
@@ -201,19 +201,12 @@ TOOLTEST() {
fi
# Run test.
- # Tflops interprets "$@" as "" when no parameter is given (e.g., the
- # case of missing file name). Changed it to use $@ till Tflops fixes it.
- #TESTING $H5DIFF $@
(
#echo "#############################"
#echo "Expected output for '$H5DIFF $@'"
#echo "#############################"
#cd $srcdir/testfiles
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- eval $RUNCMD $H5DIFF_BIN $@
- else
- eval $RUNCMD $H5DIFF_BIN "$@"
- fi
+ eval $RUNCMD $H5DIFF_BIN "$@"
) >$actual 2>$actual_err
# save actual and actual_err in case they are needed later.
cp $actual $actual_sav
diff --git a/tools/h5dump/testh5dump.sh.in b/tools/h5dump/testh5dump.sh.in
index 9dcb562..9e6cb01 100644
--- a/tools/h5dump/testh5dump.sh.in
+++ b/tools/h5dump/testh5dump.sh.in
@@ -161,12 +161,8 @@ DIFFTEST()
{
PRINT_H5DIFF $@
(
- cd $srcdir/../testfiles
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- $RUNSERIAL $H5DIFF_BIN $@ -q
- else
- $RUNSERIAL $H5DIFF_BIN "$@" -q
- fi
+ cd $srcdir/../testfiles
+ $RUNSERIAL $H5DIFF_BIN "$@" -q
)
RET=$?
if [ $RET != 0 ] ; then
@@ -198,12 +194,8 @@ IMPORTTEST()
PRINT_H5IMPORT $@
(
- cd $srcdir/../testfiles
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- $RUNSERIAL $H5IMPORT_BIN $@
- else
- $RUNSERIAL $H5IMPORT_BIN "$@"
- fi
+ cd $srcdir/../testfiles
+ $RUNSERIAL $H5IMPORT_BIN "$@"
)
RET=$?
if [ $RET != 0 ] ; then
diff --git a/tools/h5ls/h5ls.c b/tools/h5ls/h5ls.c
index ca0ddcb..a2dc128 100644
--- a/tools/h5ls/h5ls.c
+++ b/tools/h5ls/h5ls.c
@@ -2109,15 +2109,12 @@ get_width(void)
width = w[0];
}
#elif defined(H5_HAVE_TIOCGWINSZ) && defined(H5_HAVE_IOCTL)
-#ifndef __PUMAGON__
-/* the ioctl() call coredump on TFLOPS. Turn it off for now. */
{
/* Unix with ioctl(TIOCGWINSZ) */
struct winsize w;
if (ioctl(2, TIOCGWINSZ, &w)>=0 && w.ws_col>0)
width = w.ws_col;
}
-#endif
#elif defined(H5_HAVE_TIOCGETD) && defined(H5_HAVE_IOCTL)
{
/* Unix with ioctl(TIOCGETD) */
diff --git a/tools/h5repack/h5repack.sh.in b/tools/h5repack/h5repack.sh.in
index 01c33ef..e9aae81 100755
--- a/tools/h5repack/h5repack.sh.in
+++ b/tools/h5repack/h5repack.sh.in
@@ -96,11 +96,7 @@ SKIP() {
DIFFTEST()
{
VERIFY $@
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- $RUNSERIAL $H5DIFF_BIN -q $@
- else
- $RUNSERIAL $H5DIFF_BIN -q "$@"
- fi
+ $RUNSERIAL $H5DIFF_BIN -q "$@"
RET=$?
if [ $RET != 0 ] ; then
echo "*FAILED*"
@@ -116,27 +112,20 @@ DIFFTEST()
TOOLTEST()
{
# Run test.
- # Tflops interprets "$@" as "" when no parameter is given (e.g., the
- # case of missing file name). Changed it to use $@ till Tflops fixes it.
TESTING $H5REPACK $@
infile=$srcdir/testfiles/$1
path=`pwd`
outfile=$path/out.$1
shift
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- $RUNSERIAL $H5REPACK_BIN $@ $infile $outfile
- else
- $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
- fi
-
+ $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
RET=$?
if [ $RET != 0 ] ; then
- echo "*FAILED*"
- nerrors="`expr $nerrors + 1`"
+ echo "*FAILED*"
+ nerrors="`expr $nerrors + 1`"
else
- echo " PASSED"
- DIFFTEST $infile $outfile
+ echo " PASSED"
+ DIFFTEST $infile $outfile
fi
rm -f $outfile
}
@@ -146,27 +135,20 @@ TOOLTEST()
TOOLTEST0()
{
# Run test.
- # Tflops interprets "$@" as "" when no parameter is given (e.g., the
- # case of missing file name). Changed it to use $@ till Tflops fixes it.
TESTING $H5REPACK $@
infile=$srcdir/testfiles/$1
path=`pwd`
outfile=$path/out.$1
shift
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- $RUNSERIAL $H5REPACK_BIN -i $infile -o $outfile $@
- else
- $RUNSERIAL $H5REPACK_BIN -i $infile -o $outfile "$@"
- fi
-
+ $RUNSERIAL $H5REPACK_BIN -i $infile -o $outfile "$@"
RET=$?
if [ $RET != 0 ] ; then
- echo "*FAILED*"
- nerrors="`expr $nerrors + 1`"
+ echo "*FAILED*"
+ nerrors="`expr $nerrors + 1`"
else
- echo " PASSED"
- DIFFTEST $infile $outfile
+ echo " PASSED"
+ DIFFTEST $infile $outfile
fi
rm -f $outfile
}
@@ -178,27 +160,20 @@ TOOLTEST0()
TOOLTEST1()
{
# Run test.
- # Tflops interprets "$@" as "" when no parameter is given (e.g., the
- # case of missing file name). Changed it to use $@ till Tflops fixes it.
TESTING $H5REPACK $@
infile=$srcdir/../testfiles/$1
path=`pwd`
outfile=$path/out.$1
shift
- if [ "`uname -s`" = "TFLOPS O/S" ]; then
- $RUNSERIAL $H5REPACK_BIN $@ $infile $outfile
- else
- $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
- fi
-
+ $RUNSERIAL $H5REPACK_BIN "$@" $infile $outfile
RET=$?
if [ $RET != 0 ] ; then
- echo "*FAILED*"
- nerrors="`expr $nerrors + 1`"
+ echo "*FAILED*"
+ nerrors="`expr $nerrors + 1`"
else
- echo " PASSED"
- DIFFTEST $infile $outfile
+ echo " PASSED"
+ DIFFTEST $infile $outfile
fi
rm -f $outfile
}
generated by cgit v0.12 at 2024-07-16 15:37:00 (GMT)