diff options
| -rw-r--r-- | MANIFEST | 1 | ||||
| -rw-r--r-- | config/cmake/jvolTest.cmake | 301 | ||||
| -rw-r--r-- | fortran/src/CMakeLists.txt | 4 | ||||
| -rw-r--r-- | fortran/test/CMakeLists.txt | 4 | ||||
| -rw-r--r-- | hl/fortran/src/CMakeLists.txt | 4 | ||||
| -rw-r--r-- | java/test/CMakeLists.txt | 79 | ||||
| -rw-r--r-- | java/test/Makefile.am | 5 | ||||
| -rw-r--r-- | release_docs/RELEASE.txt | 13 |
8 files changed, 405 insertions, 6 deletions
@@ -3358,6 +3358,7 @@ ./config/cmake/HDF5Macros.cmake ./config/cmake/HDF5UseFortran.cmake ./config/cmake/jrunTest.cmake +./config/cmake/jvolTest.cmake ./config/cmake/libh5cc.in ./config/cmake/libhdf5.pc.in ./config/cmake/libhdf5.settings.cmake.in diff --git a/config/cmake/jvolTest.cmake b/config/cmake/jvolTest.cmake new file mode 100644 index 0000000..3a3877b --- /dev/null +++ b/config/cmake/jvolTest.cmake @@ -0,0 +1,301 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +# jrunTest.cmake executes a command and captures the output in a file. File is then compared +# against a reference file. Exit status of command can also be compared. +cmake_policy(SET CMP0007 NEW) + +# arguments checking +if (NOT TEST_TESTER) + message (FATAL_ERROR "Require TEST_TESTER to be defined") +endif () +if (NOT TEST_PROGRAM) + message (FATAL_ERROR "Require TEST_PROGRAM to be defined") +endif () +if (NOT TEST_LIBRARY_DIRECTORY) + message (STATUS "Require TEST_LIBRARY_DIRECTORY to be defined") +endif () +if (NOT TEST_FOLDER) + message (FATAL_ERROR "Require TEST_FOLDER to be defined") +endif () +if (NOT TEST_OUTPUT) + message (FATAL_ERROR "Require TEST_OUTPUT to be defined") +endif () +if (NOT TEST_CLASSPATH) + message (STATUS "Require TEST_CLASSPATH to be defined") +endif () +if (NOT TEST_VOL) + message (FATAL_ERROR "Require TEST_VOL to be defined") +endif () + +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}") + file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}) +endif () + +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") + file (REMOVE ${TEST_FOLDER}/${TEST_OUTPUT}.err) +endif () + +if (NOT TEST_LOG_LEVEL) + set (LOG_LEVEL "info") +else () + set (LOG_LEVEL "${TEST_LOG_LEVEL}") +endif () + +message (STATUS "USING ${TEST_VOL} ON COMMAND: ${TEST_TESTER} -Xmx1024M -Dorg.slf4j.simpleLogger.defaultLog=${LOG_LEVEL} -Djava.library.path=\"${TEST_LIBRARY_DIRECTORY}\" -cp \"${TEST_CLASSPATH}\" ${TEST_ARGS} ${TEST_PROGRAM} ${ARGN}") + +set (ENV{HDF5_VOL_CONNECTOR} "${TEST_VOL}") + +if (WIN32 OR MINGW) + set (ENV{PATH} "$ENV{PATH}\\;${TEST_LIBRARY_DIRECTORY}") +else () + set (ENV{LD_LIBRARY_PATH} "$ENV{LD_LIBRARY_PATH}:${TEST_LIBRARY_DIRECTORY}") +endif () + +# run the test program, capture the stdout/stderr and the result var +execute_process ( + COMMAND ${TEST_TESTER} -Xmx1024M + -Dorg.slf4j.simpleLogger.defaultLogLevel=${LOG_LEVEL} + -Djava.library.path=${TEST_LIBRARY_DIRECTORY} + -cp "${TEST_CLASSPATH}" ${TEST_ARGS} ${TEST_PROGRAM} + ${ARGN} + WORKING_DIRECTORY ${TEST_FOLDER} + RESULT_VARIABLE TEST_RESULT + OUTPUT_FILE ${TEST_OUTPUT} + ERROR_FILE ${TEST_OUTPUT}.err + OUTPUT_VARIABLE TEST_OUT + ERROR_VARIABLE TEST_ERROR +) + +message (STATUS "COMMAND Result: ${TEST_RESULT}") + +# if the .err file exists and ERRROR_APPEND is enabled +if (EXISTS "${TEST_FOLDER}/${TEST_OUTPUT}.err") + file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) + list(LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (TEST_MASK_FILE) + STRING(REGEX REPLACE "CurrentDir is [^\n]+\n" "CurrentDir is (dir name)\n" TEST_STREAM "${TEST_STREAM}") + endif () + + if (NOT ERROR_APPEND) + # write back to original .err file + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + else () + # append error output to the stdout output file + file (APPEND ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + endif () + endif () +endif () + +# if the output file or the .err file needs to mask out error stack info +if (TEST_MASK_ERROR) + if (NOT TEST_ERRREF) + # the error stack has been appended to the output file + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + else () + # the error stack remains in the .err file + file (READ ${TEST_FOLDER}/${TEST_OUTPUT}.err TEST_STREAM) + endif () + string (REGEX REPLACE "Time:[^\n]+\n" "Time: XXXX\n" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "thread [0-9]*:" "thread (IDs):" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE ": ([^\n]*)[.]c " ": (file name) " TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE " line [0-9]*" " line (number)" TEST_STREAM "${TEST_STREAM}") + #string (REGEX REPLACE "v[1-9]*[.][0-9]*[.]" "version (number)." TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "HDF5 .[1-9]*[.][0-9]*[.][0-9]*[^)]*" "HDF5 (version (number)" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "H5Eget_auto[1-2]*" "H5Eget_auto(1 or 2)" TEST_STREAM "${TEST_STREAM}") + string (REGEX REPLACE "H5Eset_auto[1-2]*" "H5Eset_auto(1 or 2)" TEST_STREAM "${TEST_STREAM}") + # write back the changes to the original files + if (NOT TEST_ERRREF) + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT} "${TEST_STREAM}") + else () + file (WRITE ${TEST_FOLDER}/${TEST_OUTPUT}.err "${TEST_STREAM}") + endif () +endif () + +# if the return value is !=expected bail out +if (NOT TEST_RESULT EQUAL TEST_EXPECT) + message (STATUS "ERROR OUTPUT: ${TEST_STREAM}") + message (FATAL_ERROR "Failed: Test program ${TEST_PROGRAM} exited != 0.\n${TEST_ERROR}") +endif () + +message (STATUS "COMMAND Error: ${TEST_ERROR}") + +# compare output files to references unless this must be skipped +set (TEST_COMPARE_RESULT 0) +if (NOT TEST_SKIP_COMPARE) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}") + file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + list(LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_REFERENCE} ${TEST_FOLDER}/${TEST_REFERENCE}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_REFERENCE}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_REFERENCE}.tmp ${TEST_FOLDER}/${TEST_REFERENCE}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_REFERENCE} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_REFERENCE} "${TEST_STREAM}") + endif () + + if (NOT TEST_SORT_COMPARE) + # now compare the output with the reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT} ${TEST_FOLDER}/${TEST_REFERENCE} + RESULT_VARIABLE TEST_COMPARE_RESULT + ) + else () + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} v1) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} v2) + list (SORT v1) + list (SORT v2) + if (NOT v1 STREQUAL v2) + set(TEST_COMPARE_RESULT 1) + endif () + endif () + + if (TEST_COMPARE_RESULT) + set (TEST_COMPARE_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) + list (LENGTH test_ref len_ref) + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_COMPARE_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () + endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") + endif () + endif () + if (NOT len_act EQUAL len_ref) + set (TEST_COMPARE_RESULT 1) + endif () + endif () + endif () + + message (STATUS "COMPARE Result: ${TEST_COMPARE_RESULT}") + + # again, if return value is !=0 scream and shout + if (TEST_COMPARE_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") + endif () + endif () + + # now compare the .err file with the error reference, if supplied + set (TEST_ERRREF_RESULT 0) + if (TEST_ERRREF) + file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + list(LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + if (WIN32 OR MINGW) + configure_file(${TEST_FOLDER}/${TEST_ERRREF} ${TEST_FOLDER}/${TEST_ERRREF}.tmp NEWLINE_STYLE CRLF) + if (EXISTS "${TEST_FOLDER}/${TEST_ERRREF}.tmp") + file(RENAME ${TEST_FOLDER}/${TEST_ERRREF}.tmp ${TEST_FOLDER}/${TEST_ERRREF}) + endif () + #file (READ ${TEST_FOLDER}/${TEST_ERRREF} TEST_STREAM) + #file (WRITE ${TEST_FOLDER}/${TEST_ERRREF} "${TEST_STREAM}") + endif () + + # now compare the error output with the error reference + execute_process ( + COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} + RESULT_VARIABLE TEST_ERRREF_RESULT + ) + if (TEST_ERRREF_RESULT) + set (TEST_ERRREF_RESULT 0) + file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) + list (LENGTH test_act len_act) + file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) + list (LENGTH test_ref len_ref) + math (EXPR _FP_LEN "${len_ref} - 1") + if (len_act GREATER 0 AND len_ref GREATER 0) + math (EXPR _FP_LEN "${len_ref} - 1") + foreach (line RANGE 0 ${_FP_LEN}) + list (GET test_act ${line} str_act) + list (GET test_ref ${line} str_ref) + if (NOT str_act STREQUAL str_ref) + if (str_act) + set (TEST_ERRREF_RESULT 1) + message (STATUS "line = ${line}\n***ACTUAL: ${str_act}\n****REFER: ${str_ref}\n") + endif () + endif () + endforeach () + else () + if (len_act EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") + endif () + if (len_ref EQUAL 0) + message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") + endif () + endif () + if (NOT len_act EQUAL len_ref) + set (TEST_ERRREF_RESULT 1) + endif () + endif () + endif () + + message (STATUS "COMPARE Result: ${TEST_ERRREF_RESULT}") + + # again, if return value is !=0 scream and shout + if (TEST_ERRREF_RESULT) + message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") + endif () + endif () +endif () + +set (TEST_GREP_RESULT 0) +if (TEST_GREP_COMPARE) + # now grep the output with the reference + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + list(LENGTH TEST_STREAM test_len) + if (test_len GREATER 0) + # TEST_REFERENCE should always be matched + string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) + string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_GREP_RESULT) + if (NOT TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") + endif () + + string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) + if (TEST_EXPECT) + # TEST_EXPECT (1) interprets TEST_FILTER as; NOT to match + string (LENGTH "${TEST_MATCH}" TEST_GREP_RESULT) + if (TEST_GREP_RESULT) + message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") + endif () + endif () + endif () +endif () + +# dump the output unless nodisplay option is set +if (TEST_SKIP_COMPARE AND NOT TEST_NO_DISPLAY) + file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) + execute_process ( + COMMAND ${CMAKE_COMMAND} -E echo ${TEST_STREAM} + RESULT_VARIABLE TEST_RESULT + ) +endif () + +# everything went fine... +message (STATUS "${TEST_PROGRAM} program used vol ${TEST_VOL} Passed") + diff --git a/fortran/src/CMakeLists.txt b/fortran/src/CMakeLists.txt index 0ec14ab..b380340 100644 --- a/fortran/src/CMakeLists.txt +++ b/fortran/src/CMakeLists.txt @@ -267,7 +267,7 @@ if (NOT ONLY_SHARED_LIBS) PRIVATE "${HDF5_F90_SRC_SOURCE_DIR};${CMAKE_Fortran_MODULE_DIRECTORY}/static;${HDF5_F90_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_Fortran_INCLUDE_DIRS}>" INTERFACE - "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>" + "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include/static>" ) target_compile_definitions(${HDF5_F90_LIB_TARGET} PRIVATE @@ -307,7 +307,7 @@ if (BUILD_SHARED_LIBS) PRIVATE "${HDF5_F90_SRC_SOURCE_DIR};${CMAKE_Fortran_MODULE_DIRECTORY}/shared;${HDF5_F90_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_Fortran_INCLUDE_DIRS}>" INTERFACE - "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>" + "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include/shared>" ) target_compile_definitions(${HDF5_F90_LIBSH_TARGET} PUBLIC diff --git a/fortran/test/CMakeLists.txt b/fortran/test/CMakeLists.txt index 3c46c9e..a3cc552 100644 --- a/fortran/test/CMakeLists.txt +++ b/fortran/test/CMakeLists.txt @@ -132,7 +132,7 @@ if (NOT BUILD_SHARED_LIBS) PRIVATE "${CMAKE_Fortran_MODULE_DIRECTORY}/static;${HDF5_F90_BINARY_DIR};${HDF5_F90_BINARY_DIR}/static" INTERFACE - "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>" + "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include/static>" ) target_compile_definitions(${HDF5_F90_TEST_LIB_TARGET} PRIVATE @@ -165,7 +165,7 @@ else () PRIVATE "${CMAKE_Fortran_MODULE_DIRECTORY}/shared;${HDF5_F90_BINARY_DIR};${HDF5_F90_BINARY_DIR}/shared" INTERFACE - "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>" + "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include/shared>" ) target_compile_definitions(${HDF5_F90_TEST_LIBSH_TARGET} PUBLIC diff --git a/hl/fortran/src/CMakeLists.txt b/hl/fortran/src/CMakeLists.txt index e532fff..91ec669 100644 --- a/hl/fortran/src/CMakeLists.txt +++ b/hl/fortran/src/CMakeLists.txt @@ -164,7 +164,7 @@ if (NOT ONLY_SHARED_LIBS) PRIVATE "${HDF5_F90_BINARY_DIR};${CMAKE_Fortran_MODULE_DIRECTORY}/static;$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_Fortran_INCLUDE_DIRS}>" INTERFACE - "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>" + "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include/static>" ) target_compile_definitions(${HDF5_HL_F90_LIB_TARGET} PUBLIC @@ -201,7 +201,7 @@ if (BUILD_SHARED_LIBS) PRIVATE "${HDF5_F90_BINARY_DIR};${CMAKE_Fortran_MODULE_DIRECTORY}/shared;$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_Fortran_INCLUDE_DIRS}>" INTERFACE - "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>" + "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include/shared>" ) target_compile_definitions(${HDF5_HL_F90_LIBSH_TARGET} PUBLIC diff --git a/java/test/CMakeLists.txt b/java/test/CMakeLists.txt index de7dc62..6275227 100644 --- a/java/test/CMakeLists.txt +++ b/java/test/CMakeLists.txt @@ -142,4 +142,83 @@ if (HDF5_TEST_JAVA AND HDF5_TEST_SERIAL) DEPENDS "JUnit-${test_file}-clearall-objects" ) endforeach () + + + ############################################################################## + ############################################################################## + ### V O L T E S T S ### + ############################################################################## + ############################################################################## + + macro (DO_VOL_TEST voltest volname volinfo volclasspath) + #message(STATUS "${voltest}-${volname} with ${volinfo}") + add_test ( + NAME JUnit-VOL-${volname}-${voltest}-clearall-objects + COMMAND ${CMAKE_COMMAND} -E remove + JUnit-VOL-${volname}-${voltest}.out + JUnit-VOL-${volname}-${voltest}.out.err + WORKING_DIRECTORY ${HDF5_BINARY_DIR}/java/test/${volname} + ) + add_test (NAME JUnit-VOL-${volname}-${voltest} + COMMAND "${CMAKE_COMMAND}" + -D "TEST_TESTER=${CMAKE_Java_RUNTIME};${CMAKE_Java_RUNTIME_FLAGS}" + -D "TEST_CLASSPATH:STRING=${volclasspath}" + -D "TEST_ARGS:STRING=${CMD_ARGS}-ea;org.junit.runner.JUnitCore" + -D "TEST_PROGRAM=test.${voltest}" + -D "TEST_LIBRARY_DIRECTORY=${CMAKE_TEST_OUTPUT_DIRECTORY}" + -D "TEST_FOLDER=${HDF5_BINARY_DIR}/java/test/${volname}" + -D "TEST_VOL:STRING=${volinfo}" + -D "TEST_OUTPUT=JUnit-VOL-${volname}-${voltest}.out" +# -D "TEST_LOG_LEVEL=trace" + -D "TEST_EXPECT=0" + -D "SKIP_APPEND=1" + -D "TEST_MASK_ERROR=TRUE" +# -D "TEST_FILTER:STRING=${testfilter}" + -D "TEST_REFERENCE=JUnit-${volname}-${voltest}.txt" + -P "${HDF_RESOURCES_DIR}/jvolTest.cmake" + ) + set_tests_properties (JUnit-VOL-${volname}-${voltest} PROPERTIES + ENVIRONMENT "HDF5_PLUGIN_PATH=${CMAKE_BINARY_DIR}/testdir2" + DEPENDS "JUnit-VOL-${volname}-${voltest}-clearall-objects" + WORKING_DIRECTORY ${HDF5_BINARY_DIR}/java/test/${volname} + ) + endmacro () + + if (HDF5_TEST_PASSTHROUGH_VOL) + set (VOL_LIST + vol_native + vol_pass_through1 + vol_pass_through2 + ) + + set (vol_native native) + set (vol_pass_through1 "pass_through under_vol=0\;under_info={}") + set (vol_pass_through2 "pass_through under_vol=505\;under_info={under_vol=0\;under_info={}}") + + foreach (voltest ${VOL_LIST}) + file (MAKE_DIRECTORY "${PROJECT_BINARY_DIR}/${voltest}") + foreach (h5_file ${HDF5_JAVA_TEST_SOURCES}) + HDFTEST_COPY_FILE("${PROJECT_SOURCE_DIR}/testfiles/JUnit-${h5_file}.txt" "${PROJECT_BINARY_DIR}/${voltest}/JUnit-${h5_file}.txt" "${HDF5_JAVA_TEST_LIB_TARGET}_${voltest}_files") + endforeach () + + HDFTEST_COPY_FILE("${PROJECT_SOURCE_DIR}/h5ex_g_iterate.orig" "${PROJECT_BINARY_DIR}/${voltest}/h5ex_g_iterate.hdf" "${HDF5_JAVA_TEST_LIB_TARGET}_${voltest}_files") + HDFTEST_COPY_FILE("${PROJECT_SOURCE_DIR}/h5ex_g_iterate.orig" "${PROJECT_BINARY_DIR}/${voltest}/h5ex_g_iterateL1.hdf" "${HDF5_JAVA_TEST_LIB_TARGET}_${voltest}_files") + HDFTEST_COPY_FILE("${PROJECT_SOURCE_DIR}/h5ex_g_iterate.orig" "${PROJECT_BINARY_DIR}/${voltest}/h5ex_g_iterateL2.hdf" "${HDF5_JAVA_TEST_LIB_TARGET}_${voltest}_files") + HDFTEST_COPY_FILE("${PROJECT_SOURCE_DIR}/h5ex_g_iterate.orig" "${PROJECT_BINARY_DIR}/${voltest}/h5ex_g_iterateO1.hdf" "${HDF5_JAVA_TEST_LIB_TARGET}_${voltest}_files") + HDFTEST_COPY_FILE("${PROJECT_SOURCE_DIR}/h5ex_g_iterate.orig" "${PROJECT_BINARY_DIR}/${voltest}/h5ex_g_iterateO2.hdf" "${HDF5_JAVA_TEST_LIB_TARGET}_${voltest}_files") + + add_custom_target(${HDF5_JAVA_TEST_LIB_TARGET}_${voltest}_files ALL COMMENT "Copying files needed by ${HDF5_JAVA_TEST_LIB_TARGET} tests" DEPENDS ${${HDF5_JAVA_TEST_LIB_TARGET}_${voltest}_files_list}) + + foreach (volinfo IN LISTS ${voltest}) + foreach (h5_file ${HDF5_JAVA_TEST_SOURCES}) + set (CMAKE_JAVA_CLASSPATH ".") + foreach (CMAKE_INCLUDE_PATH ${CMAKE_JAVA_INCLUDE_PATH}) + set (CMAKE_JAVA_CLASSPATH "${CMAKE_JAVA_CLASSPATH}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${CMAKE_INCLUDE_PATH}") + endforeach () + set (CMAKE_JAVA_CLASSPATH "${CMAKE_JAVA_CLASSPATH}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${${HDF5_JAVA_TEST_LIB_TARGET}_${h5_file}_JAR_FILE}") + DO_VOL_TEST (${h5_file} ${voltest} "${volinfo}" ${CMAKE_JAVA_CLASSPATH}) + endforeach () + endforeach () + endforeach () + endif () endif () diff --git a/java/test/Makefile.am b/java/test/Makefile.am index c375938..3f11933 100644 --- a/java/test/Makefile.am +++ b/java/test/Makefile.am @@ -84,6 +84,11 @@ noinst_DATA = $(jarfile) .PHONY: classes +# Test with just the native connector, with a single pass-through connector +# and with a doubly-stacked pass-through. +VOL_LIST = native "pass_through under_vol=0;under_info={}" \ + "pass_through under_vol=505;under_info={under_vol=0;under_info={}}" + check_SCRIPTS = junit.sh TEST_SCRIPT = $(check_SCRIPTS) diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt index 33c2cb0..1ad27dd 100644 --- a/release_docs/RELEASE.txt +++ b/release_docs/RELEASE.txt @@ -48,6 +48,13 @@ New Features Configuration: ------------- + - Fixed CMake include properties for Fortran libraries + + Corrected the library properties for Fortran to use the + correct path for the Fortran module files. + + (ADB - 2020/02/04, HDFFV-11012) + - Added common warnings files for gnu and intel Added warnings files to use one common set of flags @@ -391,6 +398,12 @@ New Features Java Library: ---------------- + - Added ability to test java library with VOLs. + + Created new CMake script that combines the java and vol test scripts. + + (ADB - 2020/02/03, HDFFV-10996) + - Tests fail for non-English locale. In the JUnit tests with a non-English locale, only the part before |