diff options
109 files changed, 4913 insertions, 4298 deletions
@@ -145,6 +145,8 @@ ./config/solaris #warnings files for both autotools and CMake +./config/clang-cxxflags +./config/clang-flags ./config/clang-warnings/developer-general ./config/clang-warnings/error-general ./config/clang-warnings/general diff --git a/config/apple b/config/apple index 0b15dfe..aba48d1 100644 --- a/config/apple +++ b/config/apple @@ -49,6 +49,7 @@ fi # Figure out compiler flags . $srcdir/config/gnu-flags +. $srcdir/config/clang-flags # temp patch: if GCC 4.2.1 is used in Lion or Mountain Lion systems, do not # use -O option as it causes failures in test/dt_arith. case "$host_os" in @@ -155,11 +156,13 @@ esac # get c++ version info case $CXX in clang++) + . $srcdir/config/clang-cxxflags cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ grep 'Apple' | sed 's/(.*//'` ;; *g++*) + . $srcdir/config/gnu-cxxflags cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ grep 'GCC' | sed 's/.*\((GCC) [-a-z0-9\. ]*.*\)/\1/'` ;; diff --git a/config/clang-cxxflags b/config/clang-cxxflags new file mode 100644 index 0000000..edd62e7 --- /dev/null +++ b/config/clang-cxxflags @@ -0,0 +1,200 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + + +# This file should be sourced into configure if the compiler is the +# Clang clang++ compiler or a derivative. It is careful not to do anything +# if the compiler is not Clang; otherwise 'cxx_flags_set' is set to 'yes' +# + +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/clang-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_clang_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/clang-warnings/${arg} + done) + IFS=' ' echo "$*" +} +# Get the compiler version in a way that works for clang++ +# unless a compiler version is already known +# +# cxx_vendor: The compiler name: clang++ +# cxx_version: Version number: 6.0.0, 7.3.0, ... 10.0.1 +# +if test "X-" = "X-$cxx_flags_set"; then + # clang++ -v will return version number following "clang" on Linux machines, + # but on Macs the version number will follow "Apple LLVM version" + cxx_version="`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cxx_version"; then + cxx_vendor="clang" + else + cxx_version="`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 |\ + grep 'Apple LLVM version' | sed 's/.*Apple LLVM version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cxx_version"; then + cxx_vendor="Apple LLVM" + fi + fi + if test "X-" != "X-$cxx_version"; then + + # Get the compiler version numbers + cxx_vers_major=`echo $cxx_version | cut -f1 -d.` + cxx_vers_minor=`echo $cxx_version | cut -f2 -d.` + cxx_vers_patch=`echo $cxx_version | cut -f3 -d.` + test -n "$cxx_vers_major" || cxx_vers_major=0 + test -n "$cxx_vers_minor" || cxx_vers_minor=0 + test -n "$cxx_vers_patch" || cxx_vers_patch=0 + fi +fi + +if test "X-clang" = "X-$cxx_vendor" -o "X-Apple LLVM" = "X-$cxx_vendor"; then + echo "compiler '$CXX' is $cxx_vendor-$cxx_version" + ############################### + # Architecture-specific flags # + ############################### + + arch= + case "$host_os-$host_cpu" in + # FreeBSD sets the information from "uname -m" to the general machine + # architecture, not the specific CPU for the machine, so even our + # Pentium II Xeon server is set to "i386". Once we know we are on a FreeBSD + # machine, use the "sysctl" command to get the CPU hardware model. + freebsd*-i386) + host_cpu_model=`sysctl -n hw.model` + case "$host_cpu_model" in + # Hmm.. this might not catch Celerons, but it won't hurt them either... + *Pro*|*II*|*III*|*IV*|*Athlon*) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + ;; + + *-i686) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + + case "$host_os-$host_cpu" in + # cygwin needs the "-std=c99" flag removed, so make + # a specific case for Cygwin without the flag and a default + # case to add the flag everywhere else + cygwin-*) + ;; + + *) + H5_CXXFLAGS="$H5_CXXFLAGS -std=c++11" + ;; + esac + + H5_CXXFLAGS="$H5_CXXFLAGS $arch" + + ############## + # Production # + ############## + + # NDEBUG is handled explicitly by the configure script + PROD_CXXFLAGS= + + ######### + # Debug # + ######### + + # NDEBUG is handled explicitly by the configure script + # -g is handled by the symbols flags + DEBUG_CXXFLAGS="-ftrapv -fno-common" + + ########### + # Symbols # + ########### + + NO_SYMBOLS_CXXFLAGS= + SYMBOLS_CXXFLAGS="-g -fno-omit-frame-pointer" + + ############# + # Profiling # + ############# + + PROFILE_CXXFLAGS="-pg" + + ################ + # Optimization # + ################ + + HIGH_OPT_CXXFLAGS="-O3" + DEBUG_OPT_CXXFLAGS="-g" + NO_OPT_CXXFLAGS="-O0" + + ############ + # Warnings # + ############ + + ########### + # General # + ########### + + H5_CXXFLAGS="$H5_CXXFLAGS $(load_clang_arguments general)" + H5_ECXXFLAGS="$H5_ECXXFLAGS $(load_clang_arguments error-general)" + + ###################### + # Developer warnings # + ###################### + + NO_DEVELOPER_WARNING_CXXFLAGS=$(load_clang_arguments no-developer-general) + DEVELOPER_WARNING_CXXFLAGS=$(load_clang_arguments developer-general) + + ############################# + # Version-specific warnings # + ############################# + + + ################# + # Flags are set # + ################# + cxx_flags_set=yes +fi + +# Clear cxx info if no flags set +if test "X$cxx_flags_set" = "X"; then + cxx_vendor= + cxx_version= +fi + diff --git a/config/clang-flags b/config/clang-flags new file mode 100644 index 0000000..b4f5e2e --- /dev/null +++ b/config/clang-flags @@ -0,0 +1,200 @@ +# -*- shell-script -*- +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. + + +# This file should be sourced into configure if the compiler is the +# Clang compiler or a derivative. It is careful not to do anything +# if the compiler is not Clang; otherwise 'cc_flags_set' is set to 'yes' +# + +# +# For now, do not promote any warnings to errors. +# +PROMOTE_ERRORS_DFLT=no + +# +# This filter rewrites -Werror= as -W, in that way demoting warnings +# promoted to errors back to warnings, if PROMOTE_ERRORS is no. +# +demote_errors() +{ + if [ ${PROMOTE_ERRORS:-${PROMOTE_ERRORS_DFLT}} = no ]; then + sed 's,-Werror=,-W,g' + else + cat + fi +} + +# +# Prepend `$srcdir/config/clang-warnings/` to the filename suffix(es) given as +# subroutine argument(s), remove comments starting with # and ending +# at EOL, replace spans of whitespace (including newlines) with spaces, +# and re-emit the file(s) thus filtered on the standard output stream. +# +load_clang_arguments() +{ + set -- $(for arg; do + sed 's,#.*$,,' $srcdir/config/clang-warnings/${arg} + done) + IFS=' ' echo "$*" +} +# Get the compiler version in a way that works for clang +# unless a compiler version is already known +# +# cc_vendor: The compiler name: clang +# cc_version: Version number: 6.0.0, 7.3.0, ... 10.0.1 +# +if test "X-" = "X-$cc_flags_set"; then + # clang -v will return version number following "clang" on Linux machines, + # but on Macs the version number will follow "Apple LLVM version" + cc_version="`$CC $CFLAGS $H5_CFLAGS -v 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cc_version"; then + cc_vendor="clang" + else + cc_version="`$CC $CFLAGS $H5_CFLAGS -v 2>&1 |\ + grep 'Apple LLVM version' | sed 's/.*Apple LLVM version \([-a-z0-9\.]*\).*/\1/'`" + if test -n "$cc_version"; then + cc_vendor="Apple LLVM" + fi + fi + if test "X-" != "X-$cc_version"; then + + # Get the compiler version numbers + cc_vers_major=`echo $cc_version | cut -f1 -d.` + cc_vers_minor=`echo $cc_version | cut -f2 -d.` + cc_vers_patch=`echo $cc_version | cut -f3 -d.` + test -n "$cc_vers_major" || cc_vers_major=0 + test -n "$cc_vers_minor" || cc_vers_minor=0 + test -n "$cc_vers_patch" || cc_vers_patch=0 + fi +fi + +if test "X-clang" = "X-$cc_vendor" -o "X-Apple LLVM" = "X-$cc_vendor"; then + echo "compiler '$CC' is $cc_vendor-$cc_version" + ############################### + # Architecture-specific flags # + ############################### + + arch= + case "$host_os-$host_cpu" in + # FreeBSD sets the information from "uname -m" to the general machine + # architecture, not the specific CPU for the machine, so even our + # Pentium II Xeon server is set to "i386". Once we know we are on a FreeBSD + # machine, use the "sysctl" command to get the CPU hardware model. + freebsd*-i386) + host_cpu_model=`sysctl -n hw.model` + case "$host_cpu_model" in + # Hmm.. this might not catch Celerons, but it won't hurt them either... + *Pro*|*II*|*III*|*IV*|*Athlon*) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + ;; + + *-i686) + # architecture-specific optimizations cause problems + # for some users who build binaries to be used on + # multiple architectures. + # arch="-march=i686" + ;; + esac + + case "$host_os-$host_cpu" in + # cygwin needs the "-std=c99" flag removed, so make + # a specific case for Cygwin without the flag and a default + # case to add the flag everywhere else + cygwin-*) + ;; + + *) + H5_CFLAGS="$H5_CFLAGS -std=c99" + ;; + esac + + H5_CFLAGS="$H5_CFLAGS $arch" + + ############## + # Production # + ############## + + # NDEBUG is handled explicitly by the configure script + PROD_CFLAGS= + + ######### + # Debug # + ######### + + # NDEBUG is handled explicitly by the configure script + # -g is handled by the symbols flags + DEBUG_CFLAGS="-ftrapv -fno-common" + + ########### + # Symbols # + ########### + + NO_SYMBOLS_CFLAGS= + SYMBOLS_CFLAGS="-g" + + ############# + # Profiling # + ############# + + PROFILE_CFLAGS="-pg" + + ################ + # Optimization # + ################ + + HIGH_OPT_CFLAGS="-O3" + DEBUG_OPT_CFLAGS="-g" + NO_OPT_CFLAGS="-O0" + + ############ + # Warnings # + ############ + + ########### + # General # + ########### + + H5_CFLAGS="$H5_CFLAGS $(load_clang_arguments general)" + H5_ECFLAGS="$H5_ECFLAGS $(load_clang_arguments error-general)" + + ###################### + # Developer warnings # + ###################### + + NO_DEVELOPER_WARNING_CFLAGS=$(load_clang_arguments no-developer-general) + DEVELOPER_WARNING_CFLAGS=$(load_clang_arguments developer-general) + + ############################# + # Version-specific warnings # + ############################# + + + ################# + # Flags are set # + ################# + cc_flags_set=yes +fi + +# Clear cc info if no flags set +if test "X$cc_flags_set" = "X"; then + cc_vendor= + cc_version= +fi + diff --git a/config/clang-warnings/developer-general b/config/clang-warnings/developer-general index aa8c32e..74d8404 100644 --- a/config/clang-warnings/developer-general +++ b/config/clang-warnings/developer-general @@ -1,3 +1,4 @@ -Wformat-nonliteral -Wmissing-noreturn +-Wsometimes-uninitialized -Wswitch-enum diff --git a/config/clang-warnings/error-general b/config/clang-warnings/error-general index a9aa516..883dff7 100644 --- a/config/clang-warnings/error-general +++ b/config/clang-warnings/error-general @@ -8,10 +8,11 @@ -Werror=missing-declarations -Werror=packed -Werror=shadow --Werror=sometimes-uninitialized -Werror=switch # -#-Werror=discarded-qualifiers +# NOTE: Following files are not compatible with incompatible-pointer-types as errors +# src/H5Dchunk.c,src/H5Dint.c,src/H5Gint.c,src/H5HFcache.c,src/H5I.c,src/H5T.c +-Wno-error=incompatible-pointer-types-discards-qualifiers # # # NOTE: File Driver files are not compatible with these warnings as errors diff --git a/config/clang-warnings/no-developer-general b/config/clang-warnings/no-developer-general index 2f4e0c5..2bf1703 100644 --- a/config/clang-warnings/no-developer-general +++ b/config/clang-warnings/no-developer-general @@ -1 +1 @@ --Wmissing-noreturn +-Wno-missing-noreturn diff --git a/config/cmake/HDFCXXCompilerFlags.cmake b/config/cmake/HDFCXXCompilerFlags.cmake index 02bf5cd..7bbebbc 100644 --- a/config/cmake/HDFCXXCompilerFlags.cmake +++ b/config/cmake/HDFCXXCompilerFlags.cmake @@ -40,7 +40,7 @@ if (HDF5_DISABLE_COMPILER_WARNINGS) # warning level is given, so remove it. if (MSVC) set (HDF5_WARNINGS_BLOCKED 1) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_LOADED) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W0") endif () @@ -51,7 +51,7 @@ if (HDF5_DISABLE_COMPILER_WARNINGS) # Most compilers use -w to suppress warnings. if (NOT HDF5_WARNINGS_BLOCKED) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_LOADED) set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -w") endif () endif () @@ -65,7 +65,7 @@ endif () # CDash is configured to only allow 3000 warnings, so # break into groups (from the config/gnu-flags file) #----------------------------------------------------------------------------- -if (NOT MSVC) +if (NOT MSVC AND NOT MINGW) if (${CMAKE_SYSTEM_NAME} MATCHES "SunOS") list (APPEND HDF5_CMAKE_CXX_FLAGS "-erroff=%none -DBSD_COMP") else () @@ -85,7 +85,7 @@ if (NOT MSVC) list (APPEND H5_CXXFLAGS0 "-Wsign-compare -Wtrigraphs -Wwrite-strings") endif() elseif (CMAKE_CXX_COMPILER_ID STREQUAL "GNU") - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED + if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER_EQUAL 4.8) # add the general CXX flags for g++ compiler versions 4.8 and above. ADD_H5_FLAGS (HDF5_CMAKE_CXX_FLAGS "${HDF5_SOURCE_DIR}/config/gnu-warnings/cxx-general") @@ -194,7 +194,9 @@ if (NOT MSVC) endif () endif () else () + if (NOT MINGW) list (APPEND HDF5_CMAKE_CXX_FLAGS "/EHsc") + endif () endif () #----------------------------------------------------------------------------- @@ -204,21 +206,19 @@ if (HDF5_ENABLE_ALL_WARNINGS) message (STATUS "....All Warnings are enabled") if (MSVC) if (HDF5_ENABLE_DEV_WARNINGS) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_LOADED) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") list (APPEND HDF5_CMAKE_CXX_FLAGS "/Wall /wd4668") endif () else () - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_LOADED) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") list (APPEND HDF5_CMAKE_CXX_FLAGS "/W3") endif () endif () else () - if (CMAKE_COMPILER_IS_GNUCC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS0} ${H5_CXXFLAGS1} ${H5_CXXFLAGS2} ${H5_CXXFLAGS3} ${H5_CXXFLAGS4}) - endif () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS0} ${H5_CXXFLAGS1} ${H5_CXXFLAGS2} ${H5_CXXFLAGS3} ${H5_CXXFLAGS4}) endif () endif () endif () @@ -229,15 +229,13 @@ endif () if (HDF5_ENABLE_GROUPZERO_WARNINGS) message (STATUS "....Group Zero warnings are enabled") if (MSVC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_LOADED) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") list (APPEND HDF5_CMAKE_CXX_FLAGS "/W1") endif () else () - if (CMAKE_COMPILER_IS_GNUCC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS0}) - endif () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS0}) endif () endif () endif () @@ -248,15 +246,13 @@ endif () if (HDF5_ENABLE_GROUPONE_WARNINGS) message (STATUS "....Group One warnings are enabled") if (MSVC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_LOADED) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") list (APPEND HDF5_CMAKE_CXX_FLAGS "/W2") endif () else () - if (CMAKE_COMPILER_IS_GNUCC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS1}) - endif () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS1}) endif () endif () endif () @@ -267,15 +263,13 @@ endif () if (HDF5_ENABLE_GROUPTWO_WARNINGS) message (STATUS "....Group Two warnings are enabled") if (MSVC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_LOADED) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") list (APPEND HDF5_CMAKE_CXX_FLAGS "/W3") endif () else () - if (CMAKE_COMPILER_IS_GNUCC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS2}) - endif () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS2}) endif () endif () endif () @@ -286,15 +280,13 @@ endif () if (HDF5_ENABLE_GROUPTHREE_WARNINGS) message (STATUS "....Group Three warnings are enabled") if (MSVC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) + if (CMAKE_CXX_COMPILER_LOADED) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_CXX_FLAGS "${HDF5_CMAKE_CXX_FLAGS}") list (APPEND HDF5_CMAKE_CXX_FLAGS "/W4") endif () else () - if (CMAKE_COMPILER_IS_GNUCC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS3}) - endif () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS3}) endif () endif () endif () @@ -305,10 +297,8 @@ endif () if (HDF5_ENABLE_GROUPFOUR_WARNINGS) message (STATUS "....Group Four warnings are enabled") if (NOT MSVC) - if (CMAKE_COMPILER_IS_GNUCC) - if (CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_LOADED) - list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS4}) - endif () + if (CMAKE_CXX_COMPILER_LOADED) + list (APPEND HDF5_CMAKE_CXX_FLAGS ${H5_CXXFLAGS4}) endif () endif () endif () diff --git a/config/cmake/HDFCompilerFlags.cmake b/config/cmake/HDFCompilerFlags.cmake index cd4ab48..31af2f8 100644 --- a/config/cmake/HDFCompilerFlags.cmake +++ b/config/cmake/HDFCompilerFlags.cmake @@ -68,7 +68,7 @@ endif () # CDash is configured to only allow 3000 warnings, so # break into groups (from the config/gnu-flags file) #----------------------------------------------------------------------------- -if (NOT MSVC) +if (NOT MSVC AND NOT MINGW) if (${CMAKE_SYSTEM_NAME} MATCHES "SunOS") list (APPEND HDF5_CMAKE_C_FLAGS "-erroff=%none -DBSD_COMP") else () @@ -209,9 +209,7 @@ if (HDF5_ENABLE_ALL_WARNINGS) list (APPEND HDF5_CMAKE_C_FLAGS "/W3") endif () else () - if (CMAKE_COMPILER_IS_GNUCC) - list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS0} ${H5_CFLAGS1} ${H5_CFLAGS2} ${H5_CFLAGS3} ${H5_CFLAGS4}) - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS0} ${H5_CFLAGS1} ${H5_CFLAGS2} ${H5_CFLAGS3} ${H5_CFLAGS4}) endif () endif () @@ -225,9 +223,7 @@ if (HDF5_ENABLE_GROUPZERO_WARNINGS) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") list (APPEND HDF5_CMAKE_C_FLAGS "/W1") else () - if (CMAKE_COMPILER_IS_GNUCC) - list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS0}) - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS0}) endif () endif () @@ -241,9 +237,7 @@ if (HDF5_ENABLE_GROUPONE_WARNINGS) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") list (APPEND HDF5_CMAKE_C_FLAGS "/W2") else () - if (CMAKE_COMPILER_IS_GNUCC) - list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS1}) - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS1}) endif () endif () @@ -257,9 +251,7 @@ if (HDF5_ENABLE_GROUPTWO_WARNINGS) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") list (APPEND HDF5_CMAKE_C_FLAGS "/W3") else () - if (CMAKE_COMPILER_IS_GNUCC) - list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS2}) - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS2}) endif () endif () @@ -273,9 +265,7 @@ if (HDF5_ENABLE_GROUPTHREE_WARNINGS) string (REGEX REPLACE "(^| )([/-])W[0-9]( |$)" " " HDF5_CMAKE_C_FLAGS "${HDF5_CMAKE_C_FLAGS}") list (APPEND HDF5_CMAKE_C_FLAGS "/W4") else () - if (CMAKE_COMPILER_IS_GNUCC) - list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS3}) - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS3}) endif () endif () @@ -286,9 +276,7 @@ option (HDF5_ENABLE_GROUPFOUR_WARNINGS "Enable group four warnings" OFF) if (HDF5_ENABLE_GROUPFOUR_WARNINGS) message (STATUS "....Group Four warnings are enabled") if (NOT MSVC) - if (CMAKE_COMPILER_IS_GNUCC) - list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS4}) - endif () + list (APPEND HDF5_CMAKE_C_FLAGS ${H5_CFLAGS4}) endif () endif () diff --git a/config/linux-gnulibc1 b/config/linux-gnulibc1 index 39225e7..a6f81ff 100644 --- a/config/linux-gnulibc1 +++ b/config/linux-gnulibc1 @@ -42,6 +42,9 @@ fi # Figure out Intel C compiler flags . $srcdir/config/intel-flags +# Figure out Clang C compiler flags +. $srcdir/config/clang-flags + # Use default Fortran 90 compiler according to what C compiler is used. if test "X-" = "X-$FC"; then case $CC_BASENAME in @@ -61,6 +64,11 @@ if test "X-" = "X-$FC"; then FC=mpif90 FC_BASENAME=mpif90 ;; + clang*) + # clang has no fortran compiler. Use gfortran. + FC=gfortran + FC_BASENAME=gfortran + ;; esac else case $FC in @@ -194,6 +202,9 @@ fi # Figure out GNU CXX compiler flags . $srcdir/config/gnu-cxxflags +# Figure out Clang CXX compiler flags +. $srcdir/config/clang-cxxflags + # compiler version strings # check if the compiler_version_info is already set @@ -223,6 +234,11 @@ case $CC in sed 's/\(Intel.* Compiler\).*\( Version [a-z0-9\.]*\).*\( Build [0-9]*\)/\1\2\3/'` ;; + *clang*) + cc_version_info="`$CC $CFLAGS $H5_CFLAGS --version 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + ;; + *) echo "No match to get cc_version_info for $CC" ;; @@ -317,6 +333,11 @@ case $CXX in cxx_version_info=`echo $cxx_version_info` ;; + *clang++*) + cxx_version_info="`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\ + grep 'clang version' | sed 's/.*clang version \([-a-z0-9\.]*\).*/\1/'`" + ;; + *) echo "No match to get cxx_version_info for $CXX" ;; diff --git a/configure.ac b/configure.ac index db0cddf..9480033 100644 --- a/configure.ac +++ b/configure.ac @@ -289,6 +289,62 @@ while test -n "$hname"; do test "$hname_tmp" = "$hname" && break done +## +## Enable/disable sanitizer checks for clang compilers, initially address sanitizer +## +AC_MSG_CHECKING([for clang sanitizer checks]) +AC_ARG_ENABLE([sanitize-checks], + [AS_HELP_STRING([--enable-sanitize-checks=address], + [(clang/clang++ compilers only) Enable sanitize checks. + Address is useful for detecting issues dealing with + memory. See AddressSanitizer in config/sanitizer/README.md + for more information. + [default=none] + ])], + [CLANG_SANITIZE_CHECKS=$enableval]) + +# Set default +if test "X-$CLANG_SANITIZE_CHECKS" = X- ; then + CLANG_SANITIZE_CHECKS=none +fi + +if test "X$CC_BASENAME" = "Xclang"; then + AC_SUBST([CLANG_SANITIZE_CHECKS]) + + # There are several sanitizer tools. At present we are testing + # and describing only -fsanitizer=address with autotools. + case "X-$CLANG_SANITIZE_CHECKS" in + X-no|X-none) + CLANG_SANITIZE_CHECKS=none + CLANG_SANITIZE_LIST= + ;; + *) + CLANG_SANITIZE_LIST=$CLANG_SANITIZE_CHECKS + ;; + esac + AC_MSG_RESULT([$CLANG_SANITIZE_CHECKS]) + + # Other tools can be added to the list of checks + # The clang compiler doesn't support some of them; they should be + # checked before adding them to the list in the help message. + # The sanitizers/sanitizers.cmake file lists these options: + # address, memory, memoryWithOrigins, undefined, thread, leak, + # 'address;undefined'. Which and which combinations of these are + # supported varies by compiler version, but unsupported options + # or combinations will result in configure errors reported in config.log. + # Comma separated lists of sanitize options wil be entered intact in + # one -fsanitize=<list> flag. Space separated lists will be entered in + # separate -fsanitize=<item> flags. + # NOTE: No sanity checking done here! + if test -n "$CLANG_SANITIZE_LIST"; then + H5_CFLAGS="$H5_CFLAGS -fno-omit-frame-pointer" + H5_CXXFLAGS="$H5_CXXFLAGS -fno-omit-frame-pointer" + for sanitizer in `echo $CLANG_SANITIZE_LIST`; do + H5_CFLAGS="$H5_CFLAGS -fsanitize=${sanitizer}" + H5_CXXFLAGS="$H5_CXXFLAGS -fsanitize=${sanitizer}" + done + fi +fi ## ---------------------------------------------------------------------- ## Determine build mode (debug, production, clean). diff --git a/examples/testh5cc.sh.in b/examples/testh5cc.sh.in index 9f766dd..71e84ed 100644 --- a/examples/testh5cc.sh.in +++ b/examples/testh5cc.sh.in @@ -48,6 +48,10 @@ verbose=${HDF5_VERBOSE:-1} # 0: none; 1: default; 2: chatty; 3: everything test $verbose -gt 2 && set -x H5_NO_DEPRECATED_SYMBOLS=`grep '#define H5_NO_DEPRECATED_SYMBOLS ' ../src/H5pubconf.h` H5_USE_16_API_DEFAULT=`grep '#define H5_USE_16_API_DEFAULT ' ../src/H5pubconf.h` +H5_USE_18_API_DEFAULT=`grep '#define H5_USE_18_API_DEFAULT ' ../src/H5pubconf.h` +H5_USE_110_API_DEFAULT=`grep '#define H5_USE_110_API_DEFAULT ' ../src/H5pubconf.h` +H5_USE_112_API_DEFAULT=`grep '#define H5_USE_112_API_DEFAULT ' ../src/H5pubconf.h` +H5_USE_114_API_DEFAULT=`grep '#define H5_USE_114_API_DEFAULT ' ../src/H5pubconf.h` # setup my machine information. myos=`uname -s` @@ -61,6 +65,10 @@ v16main=${H5TOOL}_v16main.$suffix v16main_o=${H5TOOL}_v16main.o v18main=${H5TOOL}_v18main.$suffix v18main_o=${H5TOOL}_v18main.o +v110main=${H5TOOL}_v110main.$suffix +v110main_o=${H5TOOL}_v110main.o +v112main=${H5TOOL}_v112main.$suffix +v112main_o=${H5TOOL}_v112main.o appmain=${H5TOOL}_appmain.$suffix appmain_o=${H5TOOL}_appmain.o prog1=${H5TOOL}_prog1.$suffix @@ -74,7 +82,7 @@ applib=libapp${H5TOOL}.a # Don't use the wildcard form of *.h5 as it will wipe out even *.h5 generated # by otehr test programs. This will cause a racing condition error when # parallel make (e.g., gmake -j 4) is used. -temp_SRC="$hdf5main $v16main $v18main $appmain $prog1 $prog2" +temp_SRC="$hdf5main $v16main $v18main $v110main $v112main $appmain $prog1 $prog2" temp_OBJ=`echo $temp_SRC | sed -e "s/\.${suffix}/.o/g"` temp_FILES="a.out $applib" @@ -196,6 +204,82 @@ main (void) } EOF +# Generate HDF5 v1.10 Main Program: +# This makes unique V1.10 API calls. +cat > $v110main <<EOF +/* This is a V1.10 API calls example Program. */ +#include "hdf5.h" +#define H5FILE_NAME "tmp.h5" +int +main (void) +{ + hid_t file, group, group2, dset, dset2; /* file and group handles */ + + file = H5Fcreate(H5FILE_NAME, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); + group = H5Gcreate(file, "/Group", H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT); + group2 = H5Gcreate2(file, "/Group1.8", H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT); + dset = H5Dopen(group, "Dataset", H5P_DEFAULT); + dset2 = H5Dopen2(group2, "Dataset2", H5P_DEFAULT); + H5Dclose(dset); + H5Dclose(dset2); + H5Gclose(group2); + H5Gclose(group); + H5Fclose(file); + + printf("HDF5 C program created with V1.10 API ran successfully. " + "File %s generated.\n", H5FILE_NAME); + remove(H5FILE_NAME); + return 0; +} +EOF + +# Generate HDF5 v1.12 Main Program: +# This makes unique V1.12 API calls. +cat > $v112main <<EOF +/* This is a V1.12 API calls example Program. */ +#include "hdf5.h" +#define H5FILE_NAME "tmp.h5" +#define SPACE1_RANK 3 +int +main (void) +{ + hid_t sid; /* Dataspace ID */ + hid_t fapl = -1; /* File access property list ID */ + int rank; /* Logical rank of dataspace */ + hsize_t dims[] = {3, 3, 15}; + size_t sbuf_size=0; + herr_t ret; /* Generic return value */ + hsize_t start[] = {0, 0, 0}; + hsize_t stride[] = {2, 5, 3}; + hsize_t count[] = {2, 2, 2}; + hsize_t block[] = {1, 3, 1}; + + /* Create the file access property list */ + fapl = H5Pcreate(H5P_FILE_ACCESS); + + /* Set low/high bounds in the fapl */ + ret = H5Pset_libver_bounds(fapl, H5F_LIBVER_EARLIEST, + H5F_LIBVER_LATEST); + + /* Create the dataspace */ + sid = H5Screate_simple(SPACE1_RANK, dims, NULL); + + /* Set the hyperslab selection */ + ret = H5Sselect_hyperslab(sid, H5S_SELECT_SET, start, stride, count, block); + + /* Encode simple dataspace in a buffer with the fapl setting */ + ret = H5Sencode(sid, NULL, &sbuf_size, fapl); + + /* Encode simple dataspace in a buffer with the fapl setting */ + ret = H5Sencode2(sid, NULL, &sbuf_size, fapl); + + printf("HDF5 C program created with V1.12 API ran successfully. "); +/* "File %s generated.\n", H5FILE_NAME); + remove(H5FILE_NAME); */ + return 0; +} +EOF + # Parse option # None @@ -304,17 +388,30 @@ TOOLTEST -E $appmain $prog1 $prog2 # Group5: Version compatibility tests. echo "***"Version compatibility tests. -# Test these two cases now. More later. +# 20200610 Updated for versions 1.10 - 1.14. # If H5_NO_DEPRECATED_SYMBOLS; -# then only v18main works. +# then versions v18main, v110main, and v112main work. +# -DH5_USE_<N>_API_DEFAULT flags cannot be used with H5_NO_DEPRECATED_SYMBOLS; # else if H5_USE_16_API_DEFAULT; # then v16main works. # else v18main works and -DH5_USE_16_API_DEFAULT v16main also works. +# as new versions with versioned functions are added, they will work with and +# should be added to H5_NO_DEPRECATED_SYMBOLS and to the else section, with and +# without the -DH5_USE_<N>_API_DEFAULT flag. A new H5_USE_<N>_API_DEFAULT section +# should also be added. # if [ -n "$H5_USE_16_API_DEFAULT" ]; then echo "H5_USE_16_API_DEFAULT is defined." +elif [ -n "$H5_USE_18_API_DEFAULT" ]; then + echo "H5_USE_18_API_DEFAULT is defined." +elif [ -n "$H5_USE_110_API_DEFAULT" ]; then + echo "H5_USE_110_API_DEFAULT is defined." +elif [ -n "$H5_USE_112_API_DEFAULT" ]; then + echo "H5_USE_112_API_DEFAULT is defined." +elif [ -n "$H5_USE_114_API_DEFAULT" ]; then + echo "H5_USE_114_API_DEFAULT is defined." else - echo "H5_USE_16_API_DEFAULT is not defined." + echo "No H5 API_DEFAULT is defined." fi if [ -n "$H5_NO_DEPRECATED_SYMBOLS" ]; then echo "H5_NO_DEPRECATED_SYMBOLS is defined." @@ -324,11 +421,36 @@ fi if [ -n "$H5_NO_DEPRECATED_SYMBOLS" ]; then echo "Skipping $v16main test" TOOLTEST $v18main + TOOLTEST $v18main + TOOLTEST $v110main + TOOLTEST $v112main elif [ -n "$H5_USE_16_API_DEFAULT" ]; then + echo "Testing HDF5 with 16_API_DEFAULT" TOOLTEST $v16main +elif [ -n "$H5_USE_18_API_DEFAULT" ]; then + echo "Testing HDF5 with 18_API_DEFAULT" + TOOLTEST -DH5_USE_16_API_DEFAULT $v16main + TOOLTEST $v18main +elif [ -n "$H5_USE_110_API_DEFAULT" ]; then + echo "Testing HDF5 with 110_API_DEFAULT" + TOOLTEST -DH5_USE_16_API_DEFAULT $v16main + TOOLTEST -DH5_USE_18_API_DEFAULT $v18main + TOOLTEST $v110main +elif [ -n "$H5_USE_112_API_DEFAULT" ]; then + echo "Testing HDF5 with 112_API_DEFAULT" + TOOLTEST -DH5_USE_16_API_DEFAULT $v16main + TOOLTEST -DH5_USE_18_API_DEFAULT $v18main + TOOLTEST -DH5_USE_110_API_DEFAULT $v110main + TOOLTEST $v112main else + echo "Testing HDF5 with 114_API_DEFAULT" TOOLTEST -DH5_USE_16_API_DEFAULT $v16main + TOOLTEST -DH5_USE_18_API_DEFAULT $v18main + TOOLTEST -DH5_USE_110_API_DEFAULT $v110main + TOOLTEST -DH5_USE_112_API_DEFAULT $v112main TOOLTEST $v18main + TOOLTEST $v110main + TOOLTEST $v112main fi ############################################################################## diff --git a/fortran/src/H5Aff.F90 b/fortran/src/H5Aff.F90 index abfaae9..f514c37 100644 --- a/fortran/src/H5Aff.F90 +++ b/fortran/src/H5Aff.F90 @@ -344,7 +344,7 @@ CONTAINS INTEGER(HID_T), INTENT(IN), VALUE :: attr_id END FUNCTION H5Aget_space END INTERFACE - + space_id = H5Aget_space(attr_id) hdferr = 0 @@ -389,7 +389,7 @@ CONTAINS INTEGER(HID_T), INTENT(IN), VALUE :: attr_id END FUNCTION H5Aget_type END INTERFACE - + type_id = H5Aget_type(attr_id) hdferr = 0 @@ -508,7 +508,7 @@ CONTAINS ! Returns attribute name size, ! -1 if fail INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list - INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size ! Indicates the size, in the number of characters, + INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size ! Indicates the size, in the number of characters, ! of the attribute !***** INTEGER(HID_T) :: lapl_id_default @@ -1766,7 +1766,7 @@ CONTAINS ! up to 7 dimensions. ! ! Fortran2003 Interface: -!! SUBROUTINE H5Awrite_f(attr_id, memtype_id, buf, hdferr) +!! SUBROUTINE H5Awrite_f(attr_id, memtype_id, buf, hdferr) !! INTEGER(HID_T) , INTENT(IN) :: attr_id !! INTEGER(HID_T) , INTENT(IN) :: memtype_id !! TYPE(C_PTR) , INTENT(IN) :: buf @@ -1851,7 +1851,7 @@ CONTAINS ! REAL, REAL(KIND=C_DOUBLE) and CHARACTER buffers ! up to 7 dimensions. ! Fortran2003 Interface: -!! SUBROUTINE H5Aread_f(attr_id, memtype_id, buf, hdferr) +!! SUBROUTINE H5Aread_f(attr_id, memtype_id, buf, hdferr) !! INTEGER(HID_T) , INTENT(IN) :: attr_id !! INTEGER(HID_T) , INTENT(IN) :: memtype_id !! TYPE(C_PTR) , INTENT(INOUT) :: buf diff --git a/fortran/src/H5Dff.F90 b/fortran/src/H5Dff.F90 index ec73f60..7128698 100644 --- a/fortran/src/H5Dff.F90 +++ b/fortran/src/H5Dff.F90 @@ -86,7 +86,7 @@ #include <H5config_f.inc> MODULE H5D - + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_CHAR USE H5GLOBAL @@ -1088,7 +1088,7 @@ CONTAINS SUBROUTINE h5dget_offset_f(dset_id, offset, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HADDR_T), INTENT(OUT) :: offset + INTEGER(HADDR_T), INTENT(OUT) :: offset INTEGER, INTENT(OUT) :: hdferr !***** INTERFACE @@ -1100,7 +1100,7 @@ CONTAINS END INTERFACE offset = h5dget_offset(dset_id) - + hdferr = 0 ! never returns a function error because C API never returns a function error. END SUBROUTINE h5dget_offset_f @@ -1164,7 +1164,7 @@ CONTAINS ! plist_id - Dataset access property list identifier ! hdferr - Returns 0 if successful and -1 if fails ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! April 13, 2009 ! @@ -1172,8 +1172,8 @@ CONTAINS SUBROUTINE h5dget_access_plist_f(dset_id, plist_id, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(OUT) :: plist_id - INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T), INTENT(OUT) :: plist_id + INTEGER , INTENT(OUT) :: hdferr !***** INTERFACE INTEGER FUNCTION h5dget_access_plist_c(dset_id, plist_id) BIND(C,NAME='h5dget_access_plist_c') @@ -1183,9 +1183,9 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: plist_id END FUNCTION h5dget_access_plist_c END INTERFACE - + hdferr = h5dget_access_plist_c(dset_id, plist_id) - + END SUBROUTINE h5dget_access_plist_f @@ -1295,7 +1295,7 @@ CONTAINS INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - + CALL h5dwrite_char_scalar_fix(dset_id, mem_type_id, buf, LEN(buf), dims, hdferr, & mem_space_id, file_space_id, xfer_prp) @@ -1483,17 +1483,17 @@ CONTAINS !****s* H5D (F03)/h5dwrite_f_F03 ! -! NAME +! NAME ! h5dwrite_f_F03 ! ! PURPOSE -! Writes raw data from a dataset into a buffer. +! Writes raw data from a dataset into a buffer. ! ! Inputs: ! dset_id - Identifier of the dataset to write to. ! mem_type_id - Identifier of the memory datatype. ! buf - Buffer with data to be written to the file. -! +! ! Outputs: ! hdferr - Returns 0 if successful and -1 if fails ! @@ -1548,16 +1548,16 @@ CONTAINS !****s* H5D (F03)/h5dread_f_F03 ! -! NAME +! NAME ! h5dread_f_F03 ! ! PURPOSE -! Reads raw data from a dataset into a buffer. +! Reads raw data from a dataset into a buffer. ! ! Inputs: ! dset_id - Identifier of the dataset read from. ! mem_type_id - Identifier of the memory datatype. -! +! ! Outputs: ! buf - Buffer to receive data read from file. ! hdferr - Returns 0 if successful and -1 if fails @@ -1612,10 +1612,10 @@ CONTAINS END SUBROUTINE h5dread_ptr ! -! NAME +! NAME ! h5dfill_integer ! -! PURPOSE +! PURPOSE ! Fills dataspace elements with a fill value in a memory buffer. ! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes ! of the fillvalues and buffers are supported. Buffer and fillvalue @@ -1786,10 +1786,10 @@ CONTAINS END SUBROUTINE h5dfill_c_long_double #endif ! -! NAME +! NAME ! h5dfill_char ! -! PURPOSE +! PURPOSE ! Fills dataspace elements with a fill value in a memory buffer. ! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes ! of the fillvalues and buffers are supported. Buffer and fillvalue @@ -1835,15 +1835,15 @@ CONTAINS ! NAME ! h5dvlen_reclaim_f ! -! PURPOSE -! Reclaims VL datatype memory buffers. +! PURPOSE +! Reclaims VL datatype memory buffers. ! ! Inputs: ! -! type_id - Identifier of the datatype. -! space_id - Identifier of the dataspace. -! plist_id - Identifier of the property list used to create the buffer. -! buf - Pointer to the buffer to be reclaimed. +! type_id - Identifier of the datatype. +! space_id - Identifier of the dataspace. +! plist_id - Identifier of the property list used to create the buffer. +! buf - Pointer to the buffer to be reclaimed. ! ! Outputs: ! hdferr - Returns 0 if successful and -1 if fails diff --git a/fortran/src/H5Eff.F90 b/fortran/src/H5Eff.F90 index 435d967..1e94c7a 100644 --- a/fortran/src/H5Eff.F90 +++ b/fortran/src/H5Eff.F90 @@ -254,7 +254,7 @@ CONTAINS ! estack_id - Error stack identifier. ! func - Function to be called upon an error condition. ! client_data - Data passed to the error function -! +! ! Outputs: ! hdferr - Returns 0 if successful and -1 if fails ! diff --git a/fortran/src/H5Fff.F90 b/fortran/src/H5Fff.F90 index 62e8de8..d74400c 100644 --- a/fortran/src/H5Fff.F90 +++ b/fortran/src/H5Fff.F90 @@ -690,7 +690,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(OUT) :: obj_count END FUNCTION h5fget_obj_count_c END INTERFACE - + hdferr = h5fget_obj_count_c(file_id, obj_type, obj_count) ! Don't include objects created by H5open in the H5F_OBJ_ALL_F count @@ -929,7 +929,7 @@ CONTAINS ! h5fget_file_image_f ! ! PURPOSE -! Retrieves a copy of the image of an existing, open file. +! Retrieves a copy of the image of an existing, open file. ! ! INPUTS ! file_id - Target file identifier. @@ -939,7 +939,7 @@ CONTAINS ! OUTPUTS ! hdferr - error code: ! 0 on success and -1 on failure -! OPTIONAL PARAMETERS +! OPTIONAL PARAMETERS ! buf_size - Returns the size in bytes of the buffer required to store the file image, ! no data will be copied. ! @@ -1024,7 +1024,7 @@ CONTAINS hdferr = INT(h5fget_dset_no_attrs_hint_c(file_id, c_minimize)) - ! Transfer value of C C_BOOL type to Fortran LOGICAL + ! Transfer value of C C_BOOL type to Fortran LOGICAL minimize = c_minimize END SUBROUTINE h5fget_dset_no_attrs_hint_f diff --git a/fortran/src/H5Gff.F90 b/fortran/src/H5Gff.F90 index 0684508..942cc51 100644 --- a/fortran/src/H5Gff.F90 +++ b/fortran/src/H5Gff.F90 @@ -64,11 +64,11 @@ CONTAINS ! gcpl_id - Property list for group creation ! gapl_id - Property list for group access ! -! AUTHOR +! AUTHOR ! Elena Pourmal ! August 12, 1999 ! -! HISTORY +! HISTORY ! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows ! port). March 5, 2001 @@ -668,7 +668,7 @@ CONTAINS !***** INTEGER :: namelen ! Lenghth of the current_name string INTEGER :: new_namelen ! Lenghth of the new_name string - + INTERFACE INTEGER FUNCTION h5gmove_c(loc_id, name, namelen, new_name, new_namelen) BIND(C,NAME='h5gmove_c') IMPORT :: C_CHAR @@ -680,7 +680,7 @@ CONTAINS INTEGER :: new_namelen END FUNCTION h5gmove_c END INTERFACE - + namelen = LEN(name) new_namelen = LEN(new_name) hdferr = h5gmove_c(loc_id, name, namelen, new_name, new_namelen) @@ -716,7 +716,7 @@ CONTAINS !***** INTEGER :: src_namelen ! Length of the current_name string INTEGER :: dst_namelen ! Lenghth of the new_name string - + INTERFACE INTEGER FUNCTION h5gmove2_c(src_loc_id, src_name, src_namelen, & dst_loc_id, dst_name, dst_namelen) BIND(C,NAME='h5gmove2_c') @@ -730,7 +730,7 @@ CONTAINS INTEGER :: dst_namelen END FUNCTION h5gmove2_c END INTERFACE - + src_namelen = LEN(src_name) dst_namelen = LEN(dst_name) hdferr = h5gmove2_c(src_loc_id, src_name, src_namelen, dst_loc_id, dst_name, dst_namelen) @@ -777,7 +777,7 @@ CONTAINS INTEGER, INTENT(OUT) :: hdferr ! Error code !***** INTEGER :: namelen ! Lenghth of the current_name string - + INTERFACE INTEGER FUNCTION h5gget_linkval_c(loc_id, name, namelen, size, buffer) BIND(C,NAME='h5gget_linkval_c') IMPORT :: C_CHAR, SIZE_T @@ -789,7 +789,7 @@ CONTAINS CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: buffer END FUNCTION h5gget_linkval_c END INTERFACE - + namelen = LEN(name) hdferr = h5gget_linkval_c(loc_id, name, namelen, size, buffer) END SUBROUTINE h5gget_linkval_f @@ -829,7 +829,7 @@ CONTAINS !***** INTEGER :: namelen ! Lenghth of the current_name string INTEGER :: commentlen ! Lenghth of the comment string - + INTERFACE INTEGER FUNCTION h5gset_comment_c(loc_id, name, namelen, & comment, commentlen) BIND(C,NAME='h5gset_comment_c') @@ -842,7 +842,7 @@ CONTAINS INTEGER :: commentlen END FUNCTION h5gset_comment_c END INTERFACE - + namelen = LEN(name) commentlen = LEN(comment) hdferr = h5gset_comment_c(loc_id, name, namelen, comment, commentlen) @@ -1004,7 +1004,7 @@ CONTAINS ! INPUTS ! group_id - Group identifier ! -! OUTPUTS +! OUTPUTS ! storage_type - Type of storage for links in group ! H5G_STORAGE_TYPE_COMPACT: Compact storage ! H5G_STORAGE_TYPE_DENSE: Indexed storage diff --git a/fortran/src/H5Iff.F90 b/fortran/src/H5Iff.F90 index 351dd4b..d9c3d49 100644 --- a/fortran/src/H5Iff.F90 +++ b/fortran/src/H5Iff.F90 @@ -38,7 +38,7 @@ !***** MODULE H5I - + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_CHAR USE H5GLOBAL @@ -305,10 +305,10 @@ CONTAINS ! Check if an ID is valid without producing an error message ! ! INPUTS -! id - identifier -! OUTPUTS +! id - identifier +! OUTPUTS ! valid - status of id as a valid identifier -! hdferr: - error code +! hdferr: - error code ! Success: 0 ! Failure: -1 ! @@ -318,26 +318,26 @@ CONTAINS ! SOURCE SUBROUTINE h5iis_valid_f(id, valid, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: id ! Identifier + INTEGER(HID_T), INTENT(IN) :: id ! Identifier LOGICAL, INTENT(OUT) :: valid ! Status of id as a valid identifier INTEGER, INTENT(OUT) :: hdferr ! Error code !***** INTEGER :: c_valid ! 0 = .false, 1 = .true. - + INTERFACE INTEGER FUNCTION h5iis_valid_c(id, c_valid) BIND(C, NAME='h5iis_valid_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: id ! Identifier + INTEGER(HID_T), INTENT(IN) :: id ! Identifier INTEGER :: c_valid END FUNCTION h5iis_valid_c END INTERFACE - + hdferr = h5iis_valid_c(id, c_valid) - + valid = .FALSE. ! Default IF(c_valid.EQ.1) valid = .TRUE. - + END SUBROUTINE h5iis_valid_f END MODULE H5I diff --git a/fortran/src/H5Lff.F90 b/fortran/src/H5Lff.F90 index 66f5b5c..2901a16 100644 --- a/fortran/src/H5Lff.F90 +++ b/fortran/src/H5Lff.F90 @@ -64,10 +64,10 @@ MODULE H5L ! H5L_TYPE_HARD Hard link ! H5L_TYPE_SOFT Soft link ! H5L_TYPE_EXTERNAL External link -! H5L_TYPE_ERROR Error +! H5L_TYPE_ERROR Error !cset specifies the character set in which the link name is encoded. Valid values include the following: ! H5T_CSET_ASCII US ASCII -! H5T_CSET_UTF8 UTF-8 Unicode encoding +! H5T_CSET_UTF8 UTF-8 Unicode encoding CONTAINS @@ -593,7 +593,7 @@ CONTAINS ! link_loc_id - File or group identifier. ! link_name - Name of the link for which information is being sought ! -! OUTPUTS +! OUTPUTS ! NOTE: In C these are contained in the structure H5L_info_t ! ! cset - indicates the character set used for link’s name. @@ -605,8 +605,8 @@ CONTAINS ! H5L_TYPE_EXTERNAL_F - External link ! H5L_TYPE_ERROR_ F - Error ! token - If the link is a hard link, token specifies the object token that the link points to -! val_size - If the link is a symbolic link, val_size will be the length of the link value, e.g., -! the length of the name of the pointed-to object with a null terminator. +! val_size - If the link is a symbolic link, val_size will be the length of the link value, e.g., +! the length of the name of the pointed-to object with a null terminator. ! hdferr - Returns 0 if successful and -1 if fails ! ! OPTIONAL PARAMETERS @@ -642,8 +642,8 @@ CONTAINS ! H5L_TYPE_EXTERNAL_F - External link ! H5L_TYPE_ERROR _F - Error TYPE(H5O_TOKEN_T_F), INTENT(OUT), TARGET :: token ! If the link is a hard link, token specifies the object token that the link points to - INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., - ! the length of the name of the pointed-to object with a null terminator. + INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., + ! the length of the name of the pointed-to object with a null terminator. INTEGER, INTENT(OUT) :: hdferr ! Error code: ! 0 on success and -1 on failure INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list @@ -701,13 +701,13 @@ CONTAINS ! order - Order within field or index ! n - Link for which to retrieve information ! -! OUTPUTS +! OUTPUTS ! NOTE: In C these are defined as a structure: H5L_info_t ! corder_valid - Indicates whether the creation order data is valid for this attribute ! corder - Is a positive integer containing the creation order of the attribute -! cset - Indicates the character set used for the attribute’s name +! cset - Indicates the character set used for the attribute’s name ! token - If the link is a hard link, token specifies the object token that the link points to -! val_size - If the link is a symbolic link, val_size will be the length of the link value, e.g., +! val_size - If the link is a symbolic link, val_size will be the length of the link value, e.g., ! the length of the name of the pointed-to object with a null terminator. ! hdferr - Returns 0 if successful and -1 if fails ! @@ -723,13 +723,13 @@ CONTAINS ! H5L_LINK_HARD_F, H5L_LINK_SOFT_F,H5L_LINK_EXTERNAL_F,H5L_LINK_ERROR_F ! to ! H5L_TYPE_HARD_F, H5L_TYPE_SOFT_F,H5L_TYPE_EXTERNAL_F,H5L_TYPE_ERROR_F -! MSB January 8, 2010. +! MSB January 8, 2010. ! ! SOURCE SUBROUTINE h5lget_info_by_idx_f(loc_id, group_name, index_field, order, n, & link_type, f_corder_valid, corder, cset, token, val_size, hdferr, lapl_id) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier specifying location of subject group + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier specifying location of subject group CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group INTEGER, INTENT(IN) :: index_field ! Index or field which determines the order ! H5_INDEX_UNKNOWN_F - Unknown index type @@ -747,12 +747,12 @@ CONTAINS ! H5L_TYPE_SOFT_F - Soft link ! H5L_TYPE_EXTERNAL_F - External link ! H5L_TYPE_ERROR _F - Error - LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute + LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name TYPE(H5O_TOKEN_T_F), INTENT(OUT), TARGET :: token ! If the link is a hard link, token specifies the object token that the link points to - INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., - ! the length of the name of the pointed-to object with a null terminator. + INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., + ! the length of the name of the pointed-to object with a null terminator. INTEGER, INTENT(OUT) :: hdferr ! Error code: ! 0 on success and -1 on failure INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list @@ -1426,11 +1426,11 @@ CONTAINS USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_FUNPTR IMPLICIT NONE INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name + CHARACTER(LEN=*), INTENT(IN) :: group_name INTEGER , INTENT(IN) :: index_type INTEGER , INTENT(IN) :: order INTEGER(HSIZE_T), INTENT(INOUT) :: idx - TYPE(C_FUNPTR) , INTENT(IN) :: op + TYPE(C_FUNPTR) , INTENT(IN) :: op TYPE(C_PTR) , INTENT(IN) :: op_data INTEGER , INTENT(OUT) :: return_value INTEGER , INTENT(OUT) :: hdferr diff --git a/fortran/src/H5Off.F90 b/fortran/src/H5Off.F90 index fb17942..d3b02e5 100644 --- a/fortran/src/H5Off.F90 +++ b/fortran/src/H5Off.F90 @@ -92,7 +92,7 @@ MODULE H5O END TYPE space_t TYPE, BIND(C) :: mesg_t - INTEGER(c_int64_t) :: present ! Flags to indicate presence of message type in header + INTEGER(c_int64_t) :: present ! Flags to indicate presence of message type in header INTEGER(c_int64_t) :: shared ! Flags to indicate message type is shared in header END TYPE mesg_t @@ -341,13 +341,13 @@ CONTAINS END SUBROUTINE h5oopen_by_token_f ! !****s* H5O/h5ocopy_f -! NAME -! h5ocopy_f +! NAME +! h5ocopy_f ! ! PURPOSE ! Copies an object in an HDF5 file. ! -! Inputs: +! Inputs: ! src_loc_id - Object identifier indicating the location of the source object to be copied. ! src_name - Name of the source object to be copied. ! dst_loc_id - Location identifier specifying the destination. @@ -357,13 +357,13 @@ CONTAINS ! ocpypl_id - Object copy property list. ! lcpl_id - Link creation property list for the new hard link. ! -! Outputs: +! Outputs: ! hdferr - Returns 0 if successful and -1 if fails. ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! March 14, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5ocopy_f(src_loc_id, src_name, dst_loc_id, dst_name, hdferr, ocpypl_id, lcpl_id) IMPLICIT NONE @@ -411,22 +411,22 @@ CONTAINS END SUBROUTINE h5ocopy_f !****s* H5O/h5odecr_refcount_f -! NAME +! NAME ! h5odecr_refcount_f ! ! PURPOSE -! Decrements an object reference count. +! Decrements an object reference count. ! -! Inputs: +! Inputs: ! object_id - Object identifier. ! -! Outputs: +! Outputs: ! hdferr - Returns 0 if successful and -1 if fails. ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! May 11, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5odecr_refcount_f(object_id, hdferr) IMPLICIT NONE @@ -442,33 +442,33 @@ CONTAINS END FUNCTION h5odecr_refcount_c END INTERFACE - hdferr = h5odecr_refcount_c(object_id) + hdferr = h5odecr_refcount_c(object_id) END SUBROUTINE h5odecr_refcount_f !****s* H5O/h5oexists_by_name_f -! NAME +! NAME ! h5oexists_by_name_f ! ! PURPOSE ! Determines whether a link resolves to an actual object. ! ! Inputs: -! loc_id - Identifier of the file or group to query. -! name - The name of the link to check. -! +! loc_id - Identifier of the file or group to query. +! name - The name of the link to check. +! ! ! Optional parameters: ! lapl_id - Link access property list identifier. ! -! Outputs: +! Outputs: ! link_exists - Existing link resolves to an object. ! hdferr - Returns 0 if successful and -1 if fails. ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! May 11, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5oexists_by_name_f(loc_id, name, link_exists, hdferr, lapl_id) IMPLICIT NONE @@ -498,7 +498,7 @@ CONTAINS END INTERFACE namelen = LEN(name) - + lapl_id_default = H5P_DEFAULT_F IF(PRESENT(lapl_id)) lapl_id_default = lapl_id @@ -517,11 +517,11 @@ CONTAINS END SUBROUTINE h5oexists_by_name_f !****s* H5O/h5oget_comment_f -! NAME +! NAME ! h5oget_comment_f ! ! PURPOSE -! Retrieves comment for specified object. +! Retrieves comment for specified object. ! ! Inputs: ! obj_id - Identifier for the target object. @@ -529,21 +529,21 @@ CONTAINS ! Optional parameters: ! bufsize - Size of the comment buffer. ! -! Outputs: +! Outputs: ! comment - The comment. ! hdferr - Returns 0 if successful and -1 if fails. ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! May 11, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5oget_comment_f(obj_id, comment, hdferr, bufsize) IMPLICIT NONE INTEGER(HID_T) , INTENT(IN) :: obj_id CHARACTER(LEN=*) , INTENT(OUT) :: comment INTEGER , INTENT(OUT) :: hdferr - INTEGER(HSSIZE_T), INTENT(OUT), OPTIONAL :: bufsize + INTEGER(HSSIZE_T), INTENT(OUT), OPTIONAL :: bufsize !***** INTEGER(SIZE_T) :: commentsize_default @@ -565,13 +565,13 @@ CONTAINS commentsize_default = LEN(comment) hdferr = h5oget_comment_c(obj_id, comment, commentsize_default, bufsize_default) - + IF(PRESENT(bufsize)) bufsize = bufsize_default END SUBROUTINE h5oget_comment_f !****s* H5O/h5oget_comment_by_name_f -! NAME +! NAME ! h5oget_comment_by_name_f ! ! PURPOSE @@ -579,20 +579,20 @@ CONTAINS ! ! Inputs: ! loc_id - Identifier of a file, group, dataset, or named datatype. -! name - Name of the object whose comment is to be retrieved, -! specified as a path relative to loc_id. +! name - Name of the object whose comment is to be retrieved, +! specified as a path relative to loc_id. ! ! Optional parameters: ! bufsize - Size of the comment buffer. ! -! Outputs: +! Outputs: ! comment - The comment. ! hdferr - Returns 0 if successful and -1 if fails. ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! July 6, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5oget_comment_by_name_f(loc_id, name, comment, hdferr, bufsize, lapl_id) IMPLICIT NONE @@ -600,8 +600,8 @@ CONTAINS CHARACTER(LEN=*), INTENT(IN) :: name CHARACTER(LEN=*), INTENT(OUT) :: comment INTEGER , INTENT(OUT) :: hdferr - INTEGER(SIZE_T) , INTENT(OUT), OPTIONAL :: bufsize - INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id + INTEGER(SIZE_T) , INTENT(OUT), OPTIONAL :: bufsize + INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id !***** INTEGER(SIZE_T) :: commentsize_default @@ -632,28 +632,28 @@ CONTAINS hdferr = h5oget_comment_by_name_c(loc_id, name, name_size, & comment, commentsize_default, bufsize_default, lapl_id_default) - + IF(PRESENT(bufsize)) bufsize = bufsize_default END SUBROUTINE h5oget_comment_by_name_f !****s* H5O/h5oincr_refcount_f -! NAME +! NAME ! h5oincr_refcount_f ! ! PURPOSE ! Increments an object reference count. ! -! Inputs: +! Inputs: ! obj_id - Object identifier. ! -! Outputs: +! Outputs: ! hdferr - Returns 0 if successful and -1 if fails. ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! May 15, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5oincr_refcount_f(obj_id, hdferr) IMPLICIT NONE @@ -669,7 +669,7 @@ CONTAINS END FUNCTION h5oincr_refcount_c END INTERFACE - hdferr = h5oincr_refcount_c(obj_id) + hdferr = h5oincr_refcount_c(obj_id) END SUBROUTINE h5oincr_refcount_f @@ -679,7 +679,7 @@ CONTAINS ! h5oopen_by_idx_f ! ! PURPOSE -! Open the nth object in a group. +! Open the nth object in a group. ! ! Inputs: ! loc_id - A file or group identifier. @@ -714,7 +714,7 @@ CONTAINS !***** INTEGER(SIZE_T) :: group_namelen INTEGER(HID_T) :: lapl_id_default - + INTERFACE INTEGER FUNCTION h5oopen_by_idx_c(loc_id, group_name, group_namelen, index_type, order, n, obj_id, lapl_id_default) & BIND(C,NAME='h5oopen_by_idx_c') @@ -743,23 +743,23 @@ CONTAINS END SUBROUTINE H5Oopen_by_idx_f !****s* H5O/h5oset_comment_f -! NAME +! NAME ! h5oset_comment_f ! ! PURPOSE ! Sets comment for specified object. ! -! Inputs: +! Inputs: ! obj_id - Identifier of the target object. ! comment - The new comment. ! -! Outputs: +! Outputs: ! hdferr - Returns 0 if successful and -1 if fails. ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! May 15, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5oset_comment_f(obj_id, comment, hdferr) IMPLICIT NONE @@ -782,34 +782,34 @@ CONTAINS END INTERFACE commentlen = LEN(comment) - + hdferr = h5oset_comment_c(obj_id, comment, commentlen) END SUBROUTINE h5oset_comment_f !****s* H5O/h5oset_comment_by_name_f -! NAME +! NAME ! h5oset_comment_by_name_f ! ! PURPOSE -! Sets comment for specified object. +! Sets comment for specified object. ! -! Inputs: +! Inputs: ! loc_id - Identifier of a file, group, dataset, or named datatype. -! name - Name of the object whose comment is to be set or reset, -! specified as a path relative to loc_id. +! name - Name of the object whose comment is to be set or reset, +! specified as a path relative to loc_id. ! comment - The new comment. ! -! Outputs: +! Outputs: ! hdferr - Returns 0 if successful and -1 if fails. ! ! Optional parameters: ! lapl_id - Link access property list identifier. ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! May 15, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5oset_comment_by_name_f(loc_id, name, comment, hdferr, lapl_id) IMPLICIT NONE @@ -843,7 +843,7 @@ CONTAINS lapl_id_default = H5P_DEFAULT_F IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - + hdferr = h5oset_comment_by_name_c(loc_id, name, namelen, comment, commentlen, lapl_id_default) END SUBROUTINE h5oset_comment_by_name_f @@ -869,7 +869,7 @@ CONTAINS ! op_data - User-defined pointer to data required by the application for its processing of the group ! ! Outputs: -! return_value - returns the return value of the first operator that returns a positive value, or +! return_value - returns the return value of the first operator that returns a positive value, or ! zero if all members were processed with no operator returning non-zero. ! hdferr - Returns 0 if successful and -1 if fails ! @@ -884,14 +884,14 @@ CONTAINS SUBROUTINE h5ovisit_f(object_id, index_type, order, op, op_data, return_value, hdferr, fields) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: object_id - INTEGER, INTENT(IN) :: index_type + INTEGER, INTENT(IN) :: index_type INTEGER, INTENT(IN) :: order TYPE(C_FUNPTR):: op TYPE(C_PTR) :: op_data INTEGER, INTENT(OUT) :: return_value INTEGER, INTENT(OUT) :: hdferr - INTEGER, INTENT(IN), OPTIONAL :: fields + INTEGER, INTENT(IN), OPTIONAL :: fields !***** INTEGER :: fields_c @@ -932,11 +932,11 @@ CONTAINS ! Retrieves the metadata for an object, identifying the object by location and relative name. ! ! Inputs: -! loc_id - File or group identifier specifying location of group +! loc_id - File or group identifier specifying location of group ! in which object is located. ! name - Name of group, relative to loc_id. ! -! Outputs: +! Outputs: ! object_info - Buffer in which to return object information. ! hdferr - Returns 0 if successful and -1 if fails. ! @@ -956,13 +956,13 @@ CONTAINS TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info INTEGER , INTENT(OUT) :: hdferr INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id - INTEGER , INTENT(IN) , OPTIONAL :: fields + INTEGER , INTENT(IN) , OPTIONAL :: fields !***** INTEGER(SIZE_T) :: namelen INTEGER(HID_T) :: lapl_id_default TYPE(C_PTR) :: ptr INTEGER :: fields_c - + INTERFACE INTEGER FUNCTION h5oget_info_by_name_c(loc_id, name, namelen, lapl_id_default, object_info, fields) & BIND(C, NAME='h5oget_info_by_name_c') @@ -1022,7 +1022,7 @@ CONTAINS INTEGER(HID_T) , INTENT(IN) :: object_id TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info INTEGER , INTENT(OUT) :: hdferr - INTEGER , INTENT(IN), OPTIONAL :: fields + INTEGER , INTENT(IN), OPTIONAL :: fields !***** TYPE(C_PTR) :: ptr INTEGER :: fields_c @@ -1056,14 +1056,14 @@ CONTAINS ! Retrieves the metadata for an object, identifying the object by an index position. ! ! Inputs: -! loc_id - File or group identifier specifying location of group +! loc_id - File or group identifier specifying location of group ! in which object is located. ! group_name - Name of group in which object is located. ! index_field - Index or field that determines the order. ! order - Order within field or index. ! n - Object for which information is to be returned ! -! Outputs: +! Outputs: ! object_info - Buffer in which to return object information. ! hdferr - Returns 0 if successful and -1 if fails. ! @@ -1089,13 +1089,13 @@ CONTAINS TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info INTEGER , INTENT(OUT) :: hdferr INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id - INTEGER , INTENT(IN) , OPTIONAL :: fields + INTEGER , INTENT(IN) , OPTIONAL :: fields !***** INTEGER(SIZE_T) :: namelen INTEGER(HID_T) :: lapl_id_default TYPE(C_PTR) :: ptr INTEGER :: fields_c - + INTERFACE INTEGER FUNCTION h5oget_info_by_idx_c(loc_id, group_name, namelen, & index_field, order, n, lapl_id_default, object_info, fields) BIND(C, NAME='h5oget_info_by_idx_c') @@ -1137,7 +1137,7 @@ CONTAINS ! ! Inputs: ! loc_id - Identifier of a file or group. -! object_name - Name of the object, generally relative to loc_id, that will serve as root of the iteration +! object_name - Name of the object, generally relative to loc_id, that will serve as root of the iteration ! index_type - Type of index; valid values include: ! H5_INDEX_NAME_F ! H5_INDEX_CRT_ORDER_F @@ -1149,7 +1149,7 @@ CONTAINS ! op_data - User-defined pointer to data required by the application for its processing of the group ! ! Outputs: -! return_value - Returns the return value of the first operator that returns a positive value, or +! return_value - Returns the return value of the first operator that returns a positive value, or ! zero if all members were processed with no operator returning non-zero. ! hdferr - Returns 0 if successful and -1 if fails ! @@ -1167,7 +1167,7 @@ CONTAINS IMPLICIT NONE INTEGER(HID_T) , INTENT(IN) :: loc_id CHARACTER(LEN=*), INTENT(IN) :: object_name - INTEGER , INTENT(IN) :: index_type + INTEGER , INTENT(IN) :: index_type INTEGER , INTENT(IN) :: order TYPE(C_FUNPTR) :: op @@ -1175,7 +1175,7 @@ CONTAINS INTEGER , INTENT(OUT) :: return_value INTEGER , INTENT(OUT) :: hdferr INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id - INTEGER , INTENT(IN) , OPTIONAL :: fields + INTEGER , INTENT(IN) , OPTIONAL :: fields !***** INTEGER(SIZE_T) :: namelen diff --git a/fortran/src/H5Pff.F90 b/fortran/src/H5Pff.F90 index 883e49a..7e06cf3 100644 --- a/fortran/src/H5Pff.F90 +++ b/fortran/src/H5Pff.F90 @@ -141,7 +141,7 @@ MODULE H5P BIND(C, NAME='h5pget_c') IMPORT :: c_char, c_ptr IMPORT :: HID_T - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name INTEGER :: name_len TYPE(C_PTR), VALUE :: value @@ -178,12 +178,12 @@ MODULE H5P CONTAINS -!****s* H5P/h5pcreate_f +!****s* H5P/h5pcreate_f ! NAME -! h5pcreate_f +! h5pcreate_f ! ! PURPOSE -! Creates a new property as an instance of a property +! Creates a new property as an instance of a property ! list class. ! ! INPUTS @@ -208,18 +208,18 @@ CONTAINS ! ! OUTPUTS ! prp_id - property list identifier -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 +! port). March 14, 2001 ! ! Fortran90 Interface: SUBROUTINE h5pcreate_f(class, prp_id, hdferr) @@ -238,15 +238,15 @@ CONTAINS END FUNCTION h5pcreate_c END INTERFACE - hdferr = h5pcreate_c(class, prp_id) + hdferr = h5pcreate_c(class, prp_id) END SUBROUTINE h5pcreate_f -!****s* H5P/h5pset_preserve_f +!****s* H5P/h5pset_preserve_f ! NAME -! h5pset_preserve_f +! h5pset_preserve_f ! ! PURPOSE -! Sets the dataset transfer property list status to +! Sets the dataset transfer property list status to ! TRUE or FALSE for initializing compound datatype ! members during write/read operations. ! @@ -262,20 +262,20 @@ CONTAINS ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Datatype of the flag parameter is changed from +! port). March 14, 2001 +! +! Datatype of the flag parameter is changed from ! INTEGER to LOGICAL June 4, 2003 ! ! Fortran90 Interface: SUBROUTINE h5pset_preserve_f(prp_id, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier LOGICAL, INTENT(IN) :: flag ! TRUE/FALSE flag to set the dataset ! transfer property for partila writing/reading ! compound datatype @@ -295,12 +295,12 @@ CONTAINS END INTERFACE flag_c = 0 IF(flag) flag_c = 1 - hdferr = h5pset_preserve_c(prp_id, flag_c) + hdferr = h5pset_preserve_c(prp_id, flag_c) END SUBROUTINE h5pset_preserve_f -!****s* H5P/h5pget_preserve_f +!****s* H5P/h5pget_preserve_f ! NAME -! h5pget_preserve_f +! h5pget_preserve_f ! ! PURPOSE ! Checks status of the dataset transfer property list. @@ -310,26 +310,26 @@ CONTAINS ! ! OUTPUTS ! flag - status flag -! hdferr - error code +! hdferr - error code ! Success: 0 ! Failure: -1 ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows ! port). March 14, 2001 -! -! Datatype of the flag parameter is changed from -! INTEGER to LOGICAL -! June 4, 2003 -! +! +! Datatype of the flag parameter is changed from +! INTEGER to LOGICAL +! June 4, 2003 +! ! Fortran90 Interface: SUBROUTINE h5pget_preserve_f(prp_id, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier LOGICAL, INTENT(OUT) :: flag ! TRUE/FALSE flag. Shows status of the dataset's ! transfer property for partial writing/reading ! compound datatype @@ -347,15 +347,15 @@ CONTAINS INTEGER :: flag_c END FUNCTION h5pget_preserve_c END INTERFACE - - hdferr = h5pget_preserve_c(prp_id, flag_c) + + hdferr = h5pget_preserve_c(prp_id, flag_c) flag = .FALSE. IF(flag_c .EQ. 1) flag = .TRUE. END SUBROUTINE h5pget_preserve_f -!****s* H5P/h5pget_class_f +!****s* H5P/h5pget_class_f ! NAME -! h5pget_class_f +! h5pget_class_f ! ! PURPOSE ! Returns the property list class for a property list. @@ -365,24 +365,24 @@ CONTAINS ! ! OUTPUTS ! classtype - property list class -! hdferr: - error code +! hdferr: - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 +! port). March 14, 2001 ! ! Fortran90 Interface: SUBROUTINE h5pget_class_f(prp_id, classtype, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(OUT) :: classtype ! The type of the property list + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: classtype ! The type of the property list ! to be created. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -394,42 +394,42 @@ CONTAINS IMPORT :: HID_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(OUT) :: classtype + INTEGER(HID_T), INTENT(OUT) :: classtype END FUNCTION h5pget_class_c END INTERFACE - hdferr = h5pget_class_c(prp_id, classtype) + hdferr = h5pget_class_c(prp_id, classtype) END SUBROUTINE h5pget_class_f -!****s* H5P/h5pcopy_f +!****s* H5P/h5pcopy_f ! NAME -! h5pcopy_f +! h5pcopy_f ! ! PURPOSE -! Copies an existing property list to create a new +! Copies an existing property list to create a new ! property list ! ! INPUTS ! prp_id - property list identifier ! OUTPUTS ! new_prp_id - new property list identifier -! hdferr: - error code +! hdferr: - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows ! port). March 14, 2001 ! ! Fortran90 Interface: SUBROUTINE h5pcopy_f(prp_id, new_prp_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(HID_T), INTENT(OUT) :: new_prp_id ! Identifier of property list INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -444,38 +444,38 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: new_prp_id END FUNCTION h5pcopy_c END INTERFACE - + hdferr = h5pcopy_c(prp_id, new_prp_id) END SUBROUTINE h5pcopy_f -!****s* H5P/h5pclose_f +!****s* H5P/h5pclose_f ! NAME -! h5pclose_f +! h5pclose_f ! ! PURPOSE -! Terminates access to a property list. +! Terminates access to a property list. ! ! INPUTS -! prp_id - identifier of the property list to -! terminate access to. +! prp_id - identifier of the property list to +! terminate access to. ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pclose_f(prp_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -484,45 +484,45 @@ CONTAINS BIND(C,NAME='h5pclose_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id END FUNCTION h5pclose_c END INTERFACE - + hdferr = h5pclose_c(prp_id) END SUBROUTINE h5pclose_f -!****s* H5P/h5pset_chunk_f +!****s* H5P/h5pset_chunk_f ! NAME -! h5pset_chunk_f +! h5pset_chunk_f ! ! PURPOSE -! Sets the size of the chunks used to store -! a chunked layout dataset. +! Sets the size of the chunks used to store +! a chunked layout dataset. ! ! INPUTS ! prp_id - datatset creation property list identifier ! ndims - number of dimensions for each chunk ! dims - array with dimension sizes for each chunk ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_chunk_f(prp_id, ndims, dims, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: ndims ! Number of chunk dimensions - INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims + INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims ! Array containing sizes of ! chunk dimensions INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -538,16 +538,16 @@ CONTAINS INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims END FUNCTION h5pset_chunk_c END INTERFACE - + hdferr = h5pset_chunk_c(prp_id, ndims, dims) END SUBROUTINE h5pset_chunk_f -!****s* H5P/h5pget_chunk_f +!****s* H5P/h5pget_chunk_f ! NAME -! h5pget_chunk_f +! h5pget_chunk_f ! ! PURPOSE -! Retrieves the size of chunks for the raw data of a +! Retrieves the size of chunks for the raw data of a ! chunked layout dataset ! ! INPUTS @@ -555,26 +555,26 @@ CONTAINS ! ndims - size of dims array ! OUTPUTS ! dims - array with dimension sizes for each chunk -! hdferr - error code +! hdferr - error code ! Success: number of chunk dimensions ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_chunk_f(prp_id, ndims, dims, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: ndims ! Number of chunk dimensions to ! to return - INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(OUT) :: dims + INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(OUT) :: dims ! Array containing sizes of ! chunk dimensions INTEGER, INTENT(OUT) :: hdferr ! Error code: @@ -596,19 +596,19 @@ CONTAINS hdferr = h5pget_chunk_c(prp_id, ndims, dims) END SUBROUTINE h5pget_chunk_f -!****s* H5P/h5pset_deflate_f +!****s* H5P/h5pset_deflate_f ! NAME -! h5pset_deflate_f +! h5pset_deflate_f ! ! PURPOSE -! Sets compression method and compression level. +! Sets compression method and compression level. ! ! INPUTS ! prp_id - property list identifier ! level - compression level ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 ! Failure: -1 ! @@ -617,15 +617,15 @@ CONTAINS ! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows ! port). March 14, 2001 -! +! ! Fortran90 Interface: SUBROUTINE h5pset_deflate_f(prp_id, level, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: level ! Compression level + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: level ! Compression level INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -643,15 +643,15 @@ CONTAINS END FUNCTION h5pset_deflate_c END INTERFACE hdferr = h5pset_deflate_c(prp_id, level) - + END SUBROUTINE h5pset_deflate_f -!****s* H5P/h5pget_version_f +!****s* H5P/h5pget_version_f ! NAME -! h5pget_version_f +! h5pget_version_f ! ! PURPOSE -! Retrieves the version information of various objects +! Retrieves the version information of various objects ! for a file creation property list ! ! INPUTS @@ -661,24 +661,24 @@ CONTAINS ! freelist - global freelist version number ! stab - symbol table version number ! shhdr - shared object header version number -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: +! port). March 14, 2001 +! +! Fortran90 Interface: SUBROUTINE h5pget_version_f(prp_id, boot, freelist, & stab, shhdr, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, DIMENSION(:), INTENT(OUT) :: boot ! Array to put boot ! block version number INTEGER, DIMENSION(:), INTENT(OUT) :: freelist ! Array to put global @@ -698,19 +698,19 @@ CONTAINS IMPORT :: HID_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, DIMENSION(*), INTENT(OUT) :: boot - INTEGER, DIMENSION(*), INTENT(OUT) :: freelist + INTEGER, DIMENSION(*), INTENT(OUT) :: boot + INTEGER, DIMENSION(*), INTENT(OUT) :: freelist INTEGER, DIMENSION(*), INTENT(OUT) :: stab INTEGER, DIMENSION(*), INTENT(OUT) :: shhdr END FUNCTION h5pget_version_c END INTERFACE - + hdferr = h5pget_version_c(prp_id, boot, freelist, stab, shhdr) END SUBROUTINE h5pget_version_f -!****s* H5P/h5pset_userblock_f +!****s* H5P/h5pset_userblock_f ! NAME -! h5pset_userblock_f +! h5pset_userblock_f ! ! PURPOSE ! Sets user block size @@ -720,24 +720,24 @@ CONTAINS ! size - size of the user-block in bytes ! ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 +! port). March 14, 2001 ! ! Fortran90 Interface: SUBROUTINE h5pset_userblock_f (prp_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: size ! Size of the user-block in bytes + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Size of the user-block in bytes INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -754,38 +754,38 @@ CONTAINS hdferr = h5pset_userblock_c(prp_id, size) END SUBROUTINE h5pset_userblock_f -!****s* H5P/h5pget_userblock_f +!****s* H5P/h5pget_userblock_f ! NAME -! h5pget_userblock_f +! h5pget_userblock_f ! ! PURPOSE ! Gets user block size. ! ! INPUTS -! +! ! prp_id - file creation property list identifier ! OUTPUTS -! +! ! block_size - size of the user block in bytes -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_userblock_f(prp_id, block_size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: block_size ! Size of the - ! user-block in bytes + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: block_size ! Size of the + ! user-block in bytes INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -801,41 +801,41 @@ CONTAINS hdferr = h5pget_userblock_c(prp_id, block_size) END SUBROUTINE h5pget_userblock_f -!****s* H5P/h5pset_sizes_f +!****s* H5P/h5pset_sizes_f ! NAME -! h5pset_sizes_f +! h5pset_sizes_f ! ! PURPOSE -! Sets the byte size of the offsets and lengths used +! Sets the byte size of the offsets and lengths used ! to address objects in an HDF5 file. ! ! INPUTS ! prp_id - file creation property list identifier -! sizeof_addr - size of an object offset in bytes +! sizeof_addr - size of an object offset in bytes ! sizeof_size - size of an object length in bytes ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_sizes_f (prp_id, sizeof_addr, sizeof_size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr ! Size of an object - ! offset in bytes - INTEGER(SIZE_T), INTENT(IN) :: sizeof_size ! Size of an object - ! length in bytes + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr ! Size of an object + ! offset in bytes + INTEGER(SIZE_T), INTENT(IN) :: sizeof_size ! Size of an object + ! length in bytes INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -844,50 +844,50 @@ CONTAINS BIND(C,NAME='h5pset_sizes_c') IMPORT :: HID_T, SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr INTEGER(SIZE_T), INTENT(IN) :: sizeof_size END FUNCTION h5pset_sizes_c END INTERFACE - + hdferr = h5pset_sizes_c(prp_id, sizeof_addr, sizeof_size) END SUBROUTINE h5pset_sizes_f -!****s* H5P/h5pget_sizes_f +!****s* H5P/h5pget_sizes_f ! NAME -! h5pget_sizes_f +! h5pget_sizes_f ! ! PURPOSE -! Retrieves the size of the offsets and lengths used +! Retrieves the size of the offsets and lengths used ! in an HDF5 file ! ! INPUTS ! prp_id - file creation property list identifier ! OUTPUTS -! -! sizeof_addr - size of an object offset in bytes +! +! sizeof_addr - size of an object offset in bytes ! sizeof_size - size of an object length in bytes -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_sizes_f(prp_id, sizeof_addr, sizeof_size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr ! Size of an object - ! offset in bytes + ! offset in bytes INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size ! Size of an object - ! length in bytes + ! length in bytes INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -896,49 +896,49 @@ CONTAINS BIND(C,NAME='h5pget_sizes_c') IMPORT :: HID_T, SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size END FUNCTION h5pget_sizes_c END INTERFACE - + hdferr = h5pget_sizes_c(prp_id, sizeof_addr, sizeof_size) END SUBROUTINE h5pget_sizes_f -!****s* H5P/h5pset_sym_k_f +!****s* H5P/h5pset_sym_k_f ! NAME -! h5pset_sym_k_f +! h5pset_sym_k_f ! ! PURPOSE -! Sets the size of parameters used to control the +! Sets the size of parameters used to control the !symbol table nodes ! ! INPUTS -! +! ! prp_id - file creation property list identifier ! ik - symbol table tree rank ! lk - symbol table node size ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_sym_k_f (prp_id, ik, lk, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: ik ! Symbol table tree rank - INTEGER, INTENT(IN) :: lk ! Symbol table node size + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ik ! Symbol table tree rank + INTEGER, INTENT(IN) :: lk ! Symbol table node size INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -947,46 +947,46 @@ CONTAINS BIND(C,NAME='h5pset_sym_k_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER, INTENT(IN) :: ik INTEGER, INTENT(IN) :: lk END FUNCTION h5pset_sym_k_c END INTERFACE - + hdferr = h5pset_sym_k_c(prp_id, ik, lk) END SUBROUTINE h5pset_sym_k_f -!****s* H5P/h5pget_sym_k_f +!****s* H5P/h5pget_sym_k_f ! NAME -! h5pget_sym_k_f +! h5pget_sym_k_f ! ! PURPOSE ! Retrieves the size of the symbol table B-tree 1/2 rank -! and the symbol table leaf node 1/2 size. +! and the symbol table leaf node 1/2 size. ! ! INPUTS -! +! ! prp_id - file creation property list identifier ! OUTPUTS -! +! ! ik - symbol table tree 1/2 rank ! lk - symbol table node 1/2 size -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_sym_k_f(prp_id, ik, lk, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: ik ! Symbol table tree rank INTEGER, INTENT(OUT) :: lk ! Symbol table node size INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -997,45 +997,45 @@ CONTAINS BIND(C,NAME='h5pget_sym_k_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER, INTENT(OUT) :: ik INTEGER, INTENT(OUT) :: lk END FUNCTION h5pget_sym_k_c END INTERFACE - + hdferr = h5pget_sym_k_c(prp_id, ik, lk) END SUBROUTINE h5pget_sym_k_f -!****s* H5P/h5pset_istore_k_f +!****s* H5P/h5pset_istore_k_f ! NAME -! h5pset_istore_k_f +! h5pset_istore_k_f ! ! PURPOSE -! Sets the size of the parameter used to control the +! Sets the size of the parameter used to control the ! B-trees for indexing chunked datasets ! ! INPUTS -! +! ! prp_id - file creation property list identifier ! ik - 1/2 rank of chunked storage B-tree ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_istore_k_f (prp_id, ik, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: ik ! 1/2 rank of chunked storage B-tree INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1049,40 +1049,40 @@ CONTAINS INTEGER, INTENT(IN) :: ik END FUNCTION h5pset_istore_k_c END INTERFACE - + hdferr = h5pset_istore_k_c(prp_id, ik) END SUBROUTINE h5pset_istore_k_f -!****s* H5P/h5pget_istore_k_f +!****s* H5P/h5pget_istore_k_f ! NAME -! h5pget_istore_k_f +! h5pget_istore_k_f ! ! PURPOSE -! Queries the 1/2 rank of an indexed storage B-tree. +! Queries the 1/2 rank of an indexed storage B-tree. ! ! INPUTS -! +! ! prp_id - file creation property list identifier ! OUTPUTS -! +! ! ik - 1/2 rank of chunked storage B-tree -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_istore_k_f(prp_id, ik, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: ik ! 1/2 rank of chunked storage B-tree INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1096,41 +1096,41 @@ CONTAINS INTEGER, INTENT(OUT) :: ik END FUNCTION h5pget_istore_k_c END INTERFACE - + hdferr = h5pget_istore_k_c(prp_id, ik) END SUBROUTINE h5pget_istore_k_f -!****s* H5P/h5pget_driver_f +!****s* H5P/h5pget_driver_f ! NAME -! h5pget_driver_f +! h5pget_driver_f ! ! PURPOSE -! Returns low-lever driver identifier. +! Returns low-lever driver identifier. ! ! INPUTS -! -! prp_id - file access or data transfer property -! list identifier. +! +! prp_id - file access or data transfer property +! list identifier. ! OUTPUTS -! +! ! driver - low-level driver identifier -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_driver_f(prp_id, driver, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(HID_T), INTENT(OUT) :: driver ! Low-level file driver identifier INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1144,39 +1144,39 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: driver END FUNCTION h5pget_driver_c END INTERFACE - + hdferr = h5pget_driver_c(prp_id, driver) END SUBROUTINE h5pget_driver_f -!****s* H5P/h5pset_fapl_stdio_f +!****s* H5P/h5pset_fapl_stdio_f ! NAME -! h5pset_fapl_stdio_f +! h5pset_fapl_stdio_f ! ! PURPOSE -! Sets the standard I/O driver. +! Sets the standard I/O driver. ! ! INPUTS -! +! ! prp_id - file access property list identifier ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_fapl_stdio_f (prp_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -1188,34 +1188,34 @@ CONTAINS INTEGER(HID_T), INTENT(IN) :: prp_id END FUNCTION h5pset_fapl_stdio_c END INTERFACE - + hdferr = h5pset_fapl_stdio_c(prp_id) END SUBROUTINE h5pset_fapl_stdio_f -!****s* H5P/h5pget_stdio_f +!****s* H5P/h5pget_stdio_f ! NAME -! h5pget_stdio_f +! h5pget_stdio_f ! ! PURPOSE ! NOT AVAILABLE ! ! INPUTS -! +! ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! SOURCE ! SUBROUTINE h5pget_stdio_f (prp_id, io, hdferr) ! @@ -1231,35 +1231,35 @@ CONTAINS ! hdferr = h5pget_stdio_c(prp_id, io) ! END SUBROUTINE h5pget_stdio_f -!****s* H5P/h5pset_fapl_sec2_f +!****s* H5P/h5pset_fapl_sec2_f ! NAME -! h5pset_fapl_sec2_f +! h5pset_fapl_sec2_f ! ! PURPOSE -! Sets the sec2 driver. +! Sets the sec2 driver. ! ! INPUTS -! +! ! prp_id - file access property list identifier ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_fapl_sec2_f (prp_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -1268,38 +1268,38 @@ CONTAINS BIND(C,NAME='h5pset_fapl_sec2_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier END FUNCTION h5pset_fapl_sec2_c END INTERFACE - + hdferr = h5pset_fapl_sec2_c(prp_id) END SUBROUTINE h5pset_fapl_sec2_f -!****s* H5P/h5pget_sec2_f +!****s* H5P/h5pget_sec2_f ! NAME -! h5pget_sec2_f +! h5pget_sec2_f ! ! PURPOSE ! NOT AVAILABLE ! ! INPUTS -! +! ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! SOURCE! SUBROUTINE h5pget_sec2_f (prp_id, sec2, hdferr) +! port). March 14, 2001 +! +! SOURCE! SUBROUTINE h5pget_sec2_f (prp_id, sec2, hdferr) ! IMPLICIT NONE ! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier ! INTEGER, INTENT(OUT) :: sec2 ! value indicates whether the file @@ -1312,37 +1312,37 @@ CONTAINS ! hdferr = h5pget_sec2_c(prp_id, sec2) ! END SUBROUTINE h5pget_sec2_f -!****s* H5P/h5pset_alignment_f +!****s* H5P/h5pset_alignment_f ! NAME -! h5pset_alignment_f +! h5pset_alignment_f ! ! PURPOSE -! Sets alignment properties of a file access property list. +! Sets alignment properties of a file access property list. ! ! INPUTS -! +! ! prp_id - file access property list identifier -! threshold - threshold value +! threshold - threshold value ! alignment - alignment value ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_alignment_f(prp_id, threshold, alignment, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(HSIZE_T), INTENT(IN) :: threshold ! Threshold value INTEGER(HSIZE_T), INTENT(IN) :: alignment ! alignment value INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -1358,41 +1358,41 @@ CONTAINS INTEGER(HSIZE_T), INTENT(IN) :: alignment END FUNCTION h5pset_alignment_c END INTERFACE - + hdferr = h5pset_alignment_c(prp_id, threshold, alignment) END SUBROUTINE h5pset_alignment_f -!****s* H5P/h5pget_alignment_f +!****s* H5P/h5pget_alignment_f ! NAME -! h5pget_alignment_f +! h5pget_alignment_f ! ! PURPOSE -! Retrieves the current settings for alignment -! properties from a file access property list. +! Retrieves the current settings for alignment +! properties from a file access property list. ! ! INPUTS ! prp_id - file access property list identifier ! ! OUTPUTS -! threshold - threshold value +! threshold - threshold value ! alignment - alignment value -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_alignment_f(prp_id, threshold, alignment, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(HSIZE_T), INTENT(OUT) :: threshold ! Threshold value INTEGER(HSIZE_T), INTENT(OUT) :: alignment ! alignment value INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -1408,44 +1408,44 @@ CONTAINS INTEGER(HSIZE_T), INTENT(OUT) :: alignment END FUNCTION h5pget_alignment_c END INTERFACE - + hdferr = h5pget_alignment_c(prp_id, threshold, alignment) END SUBROUTINE h5pget_alignment_f -!****s* H5P/h5pset_fapl_core_f +!****s* H5P/h5pset_fapl_core_f ! NAME -! h5pset_fapl_core_f +! h5pset_fapl_core_f ! ! PURPOSE -! Modifies the file access property list to use the -! H5FD_CORE driver. +! Modifies the file access property list to use the +! H5FD_CORE driver. ! ! INPUTS ! prp_id - file access property list identifier -! increment - size, in bytes, of memory increments -! backing_store - boolean flag indicating whether to write -! the file contents to disk when the file is closed. +! increment - size, in bytes, of memory increments +! backing_store - boolean flag indicating whether to write +! the file contents to disk when the file is closed. ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_fapl_core_f(prp_id, increment, backing_store, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(SIZE_T), INTENT(IN) :: increment ! File block size in bytes. LOGICAL, INTENT(IN) :: backing_store ! Flag to indicate that - ! entire file contents are flushed to a file + ! entire file contents are flushed to a file ! with the same name as this core file. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1456,9 +1456,9 @@ CONTAINS BIND(C,NAME='h5pset_fapl_core_c') IMPORT :: HID_T, SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(SIZE_T), INTENT(IN) :: increment - INTEGER :: backing_store_flag + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(IN) :: increment + INTEGER :: backing_store_flag END FUNCTION h5pset_fapl_core_c END INTERFACE backing_store_flag = 0 @@ -1466,96 +1466,96 @@ CONTAINS hdferr = h5pset_fapl_core_c(prp_id, increment, backing_store_flag) END SUBROUTINE h5pset_fapl_core_f -!****s* H5P/h5pget_fapl_core_f +!****s* H5P/h5pget_fapl_core_f ! NAME -! h5pget_fapl_core_f +! h5pget_fapl_core_f ! ! PURPOSE -! Queries core file driver properties. +! Queries core file driver properties. ! ! INPUTS ! prp_id - file access property list identifier ! OUTPUTS -! -! increment - size, in bytes, of memory increments -! backing_store - boolean flag indicating whether to write -! the file contents to disk when the file is closed. -! hdferr - error code +! +! increment - size, in bytes, of memory increments +! backing_store - boolean flag indicating whether to write +! the file contents to disk when the file is closed. +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_fapl_core_f(prp_id, increment, backing_store, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(SIZE_T), INTENT(OUT) :: increment ! File block size in bytes. LOGICAL, INTENT(OUT) :: backing_store ! Flag to indicate that - ! entire file contents are flushed to a file + ! entire file contents are flushed to a file ! with the same name as this core file. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** - INTEGER :: backing_store_flag + INTEGER :: backing_store_flag INTERFACE INTEGER FUNCTION h5pget_fapl_core_c(prp_id, increment, backing_store_flag) & BIND(C,NAME='h5pget_fapl_core_c') IMPORT :: HID_T,SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(SIZE_T), INTENT(OUT) :: increment - INTEGER :: backing_store_flag + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(OUT) :: increment + INTEGER :: backing_store_flag END FUNCTION h5pget_fapl_core_c END INTERFACE - + hdferr = h5pget_fapl_core_c(prp_id, increment, backing_store_flag) backing_store =.FALSE. IF (backing_store_flag .EQ. 1) backing_store =.TRUE. END SUBROUTINE h5pget_fapl_core_f -!****s* H5P/ h5pset_fapl_family_f +!****s* H5P/ h5pset_fapl_family_f ! NAME -! h5pset_fapl_family_f +! h5pset_fapl_family_f ! ! PURPOSE -! Sets the file access property list to use the family driver. +! Sets the file access property list to use the family driver. ! ! INPUTS ! prp_id - file access property list identifier -! memb_size - size in bytes of each file member -! memb_plist - identifier of the file access property +! memb_size - size in bytes of each file member +! memb_plist - identifier of the file access property ! list to be used for each family member ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_fapl_family_f(prp_id, memb_size, memb_plist , hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(HSIZE_T), INTENT(IN) :: memb_size ! Logical size, in bytes, ! of each family member - INTEGER(HID_T), INTENT(IN) :: memb_plist ! Identifier of the file - ! access property list for + INTEGER(HID_T), INTENT(IN) :: memb_plist ! Identifier of the file + ! access property list for ! each member of the family INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1574,39 +1574,39 @@ CONTAINS hdferr = h5pset_fapl_family_c(prp_id, memb_size, memb_plist) END SUBROUTINE h5pset_fapl_family_f -!****s* H5P/h5pget_fapl_family_f +!****s* H5P/h5pget_fapl_family_f ! NAME -! h5pget_fapl_family_f +! h5pget_fapl_family_f ! ! PURPOSE -! Returns file access property list information. +! Returns file access property list information. ! ! INPUTS ! prp_id - file access property list identifier ! OUTPUTS -! memb_size - size in bytes of each file member -! memb_plist - identifier of the file access property +! memb_size - size in bytes of each file member +! memb_plist - identifier of the file access property ! list to be used for each family member -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_fapl_family_f(prp_id, memb_size, memb_plist , hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(HSIZE_T), INTENT(OUT) :: memb_size ! Logical size, in bytes, ! of each family member - INTEGER(HID_T), INTENT(OUT) :: memb_plist ! Identifier of the file - ! access property list for + INTEGER(HID_T), INTENT(OUT) :: memb_plist ! Identifier of the file + ! access property list for ! each member of the family INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1621,52 +1621,52 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: memb_plist END FUNCTION h5pget_fapl_family_c END INTERFACE - + hdferr = h5pget_fapl_family_c(prp_id, memb_size, memb_plist) END SUBROUTINE h5pget_fapl_family_f -!****s* H5P/h5pset_cache_f +!****s* H5P/h5pset_cache_f ! NAME -! h5pset_cache_f +! h5pset_cache_f ! ! PURPOSE -! Sets the meta data cache and raw data chunk +! Sets the meta data cache and raw data chunk ! cache parameters ! ! INPUTS -! +! ! prp_id - file access property list identifier -! mdc_nelmts - number of elements (objects) in the meta -! data cache -! rdcc_nelmts - number of elements (objects) in the raw -! data chunk cache -! rdcc_nbytes - total size of the raw data chunk cache, in bytes +! mdc_nelmts - number of elements (objects) in the meta +! data cache +! rdcc_nelmts - number of elements (objects) in the raw +! data chunk cache +! rdcc_nbytes - total size of the raw data chunk cache, in bytes ! rdcc_w0 - preemption policy (0 or 1) ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_cache_f(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: mdc_nelmts ! Number of elements (objects) ! in the meta data cache INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts ! Number of elements (objects) ! in the meta data cache - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! Total size of the raw data - ! chunk cache, in bytes + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! Total size of the raw data + ! chunk cache, in bytes REAL, INTENT(IN) :: rdcc_w0 ! Preemption policy INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1677,8 +1677,8 @@ CONTAINS IMPORT :: HID_T, SIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: mdc_nelmts - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts + INTEGER, INTENT(IN) :: mdc_nelmts + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes REAL, INTENT(IN) :: rdcc_w0 END FUNCTION h5pset_cache_c @@ -1687,50 +1687,50 @@ CONTAINS hdferr = h5pset_cache_c(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0 ) END SUBROUTINE h5pset_cache_f -!****s* H5P/h5pget_cache_f +!****s* H5P/h5pget_cache_f ! NAME -! h5pget_cache_f +! h5pget_cache_f ! ! PURPOSE -! Queries the meta data cache and raw data chunk cache -! parameters. +! Queries the meta data cache and raw data chunk cache +! parameters. ! ! INPUTS ! prp_id - file access property list identifier ! ! OUTPUTS -! mdc_nelmts - number of elements (objects) in the meta -! data cache -! rdcc_nelmts - number of elements (objects) in the raw -! data chunk cache -! rdcc_nbytes - total size of the raw data chunk cache, in bytes +! mdc_nelmts - number of elements (objects) in the meta +! data cache +! rdcc_nelmts - number of elements (objects) in the raw +! data chunk cache +! rdcc_nbytes - total size of the raw data chunk cache, in bytes ! rdcc_w0 - preemption policy (0 or 1) -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 +! port). March 14, 2001 ! ! Bug fix: type of the rdcc_nelmts parameter should be INTEGER -! instead of INTEGER(SIZE_T) October 10, 2003 -! +! instead of INTEGER(SIZE_T) October 10, 2003 +! ! Fortran90 Interface: SUBROUTINE h5pget_cache_f(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: mdc_nelmts ! Number of elements (objects) ! in the meta data cache INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts ! Number of elements (objects) ! in the meta data cache - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data - ! chunk cache, in bytes + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data + ! chunk cache, in bytes REAL, INTENT(OUT) :: rdcc_w0 ! Preemption policy INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1741,58 +1741,58 @@ CONTAINS IMPORT :: HID_T, SIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: mdc_nelmts - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts + INTEGER, INTENT(OUT) :: mdc_nelmts + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes REAL, INTENT(OUT) :: rdcc_w0 END FUNCTION h5pget_cache_c END INTERFACE - + hdferr = h5pget_cache_c(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0 ) END SUBROUTINE h5pget_cache_f -!****s* H5P/h5pset_fapl_split_f +!****s* H5P/h5pset_fapl_split_f ! NAME -! h5pset_fapl_split_f +! h5pset_fapl_split_f ! ! PURPOSE -! Emulates the old split file driver. +! Emulates the old split file driver. ! ! INPUTS -! +! ! prp_id - file access property list identifier -! meta_ext - name of the extension for the metafile +! meta_ext - name of the extension for the metafile ! filename -! meta_plist - identifier of the meta file access property +! meta_plist - identifier of the meta file access property ! list ! raw_ext - name extension for the raw file filename ! raw_plist - identifier of the raw file access property list ! ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_fapl_split_f(prp_id, meta_ext, meta_plist, raw_ext, raw_plist, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier CHARACTER(LEN=*), INTENT(IN) :: meta_ext ! Name of the extension for ! the metafile filename INTEGER(HID_T), INTENT(IN) :: meta_plist ! Identifier of the meta file ! access property list CHARACTER(LEN=*), INTENT(IN) :: raw_ext ! Name extension for the raw file filename - INTEGER(HID_T), INTENT(IN) :: raw_plist ! Identifier of the raw file + INTEGER(HID_T), INTENT(IN) :: raw_plist ! Identifier of the raw file ! access property list INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -1805,10 +1805,10 @@ CONTAINS IMPORT :: HID_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: meta_ext + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: meta_ext INTEGER(HID_T), INTENT(IN) :: meta_plist CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: raw_ext - INTEGER(HID_T), INTENT(IN) :: raw_plist + INTEGER(HID_T), INTENT(IN) :: raw_plist INTEGER :: meta_len, raw_len END FUNCTION h5pset_fapl_split_c END INTERFACE @@ -1818,30 +1818,30 @@ CONTAINS hdferr = h5pset_fapl_split_c(prp_id,meta_len,meta_ext,meta_plist,raw_len,raw_ext,raw_plist) END SUBROUTINE h5pset_fapl_split_f -!****s* H5P/h5pget_split_f +!****s* H5P/h5pget_split_f ! NAME -! h5pget_split_f +! h5pget_split_f ! ! PURPOSE ! NOT AVAILABLE ! ! INPUTS -! +! ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! SOURCE ! SUBROUTINE h5pget_split_f(prp_id, meta_ext_size, meta_ext, meta_plist,raw_ext_size,& ! raw_ext, raw_plist, hdferr) @@ -1870,37 +1870,37 @@ CONTAINS ! raw_ext_size, raw_ext, raw_plist ) ! END SUBROUTINE h5pget_split_f -!****s* H5P/h5pset_gc_references_f +!****s* H5P/h5pset_gc_references_f ! NAME -! h5pset_gc_references_f +! h5pset_gc_references_f ! ! PURPOSE -! Sets garbage collecting references flag. +! Sets garbage collecting references flag. ! ! INPUTS -! +! ! prp_id - file access property list identifier -! gc_reference - flag for stting garbage collection on +! gc_reference - flag for stting garbage collection on ! and off (1 or 0) ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: +! port). March 14, 2001 +! +! Fortran90 Interface: SUBROUTINE h5pset_gc_references_f (prp_id, gc_reference, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: gc_reference ! The flag for garbage collecting ! references for the file INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -1919,37 +1919,37 @@ CONTAINS hdferr = h5pset_gc_references_c(prp_id, gc_reference) END SUBROUTINE h5pset_gc_references_f -!****s* H5P/h5pget_gc_references_f +!****s* H5P/h5pget_gc_references_f ! NAME -! h5pget_gc_references_f +! h5pget_gc_references_f ! ! PURPOSE -! Returns garbage collecting references setting. +! Returns garbage collecting references setting. ! ! INPUTS -! +! ! prp_id - file access property list identifier ! OUTPUTS -! -! gc_reference - flag for stting garbage collection on +! +! gc_reference - flag for stting garbage collection on ! and off (1 or 0) -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_gc_references_f(prp_id, gc_reference, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: gc_reference ! The flag for garbage collecting ! references for the file INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -1964,20 +1964,20 @@ CONTAINS INTEGER, INTENT(OUT) :: gc_reference END FUNCTION h5pget_gc_references_c END INTERFACE - + hdferr = h5pget_gc_references_c(prp_id, gc_reference) END SUBROUTINE h5pget_gc_references_f -!****s* H5P/h5pset_layout_f +!****s* H5P/h5pset_layout_f ! NAME -! h5pset_layout_f +! h5pset_layout_f ! ! PURPOSE -! Sets the type of storage used store the raw data -! for a dataset. +! Sets the type of storage used store the raw data +! for a dataset. ! ! INPUTS -! +! ! prp_id - data creation property list identifier ! layout - type of storage layout for raw data ! possible values are: @@ -1985,24 +1985,24 @@ CONTAINS ! H5D_CONTIGUOUS_F ! H5D_CHUNKED_F ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_layout_f (prp_id, layout, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: layout ! Type of storage layout for raw data ! possible values are: ! H5D_COMPACT_F @@ -2020,44 +2020,44 @@ CONTAINS INTEGER, INTENT(IN) :: layout END FUNCTION h5pset_layout_c END INTERFACE - + hdferr = h5pset_layout_c(prp_id, layout) END SUBROUTINE h5pset_layout_f -!****s* H5P/h5pget_layout_f +!****s* H5P/h5pget_layout_f ! NAME -! h5pget_layout_f +! h5pget_layout_f ! ! PURPOSE -! Returns the layout of the raw data for a dataset. +! Returns the layout of the raw data for a dataset. ! ! INPUTS -! +! ! prp_id - data creation property list identifier ! OUTPUTS -! +! ! layout - type of storage layout for raw data ! possible values are: ! H5D_COMPACT_F ! H5D_CONTIGUOUS_F ! H5D_CHUNKED_F -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_layout_f (prp_id, layout, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: layout ! Type of storage layout for raw data ! possible values are: ! H5D_COMPACT_F(0) @@ -2075,31 +2075,31 @@ CONTAINS INTEGER, INTENT(OUT) :: layout END FUNCTION h5pget_layout_c END INTERFACE - + hdferr = h5pget_layout_c(prp_id, layout) END SUBROUTINE h5pget_layout_f -!****s* H5P/h5pset_filter_f +!****s* H5P/h5pset_filter_f ! NAME -! h5pset_filter_f +! h5pset_filter_f ! ! PURPOSE -! Adds a filter to the filter pipeline. +! Adds a filter to the filter pipeline. ! ! INPUTS -! -! prp_id - data creation or transfer property list +! +! prp_id - data creation or transfer property list ! identifier -! filter - filter to be added to the pipeline +! filter - filter to be added to the pipeline ! flags - bit vector specifying certain general ! properties of the filter ! cd_nelmts - number of elements in cd_values ! cd_values - auxiliary data for the filter ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -2108,7 +2108,7 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pset_filter_f(prp_id, filter, flags, cd_nelmts, cd_values, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: filter ! Filter to be added to the pipeline. INTEGER, INTENT(IN) :: flags ! Bit vector specifying certain general ! properties of the filter. @@ -2122,48 +2122,48 @@ CONTAINS BIND(C,NAME='h5pset_filter_c') IMPORT :: HID_T, SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter - INTEGER, INTENT(IN) :: flags - INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts - INTEGER, DIMENSION(*), INTENT(IN) :: cd_values + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(IN) :: flags + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values END FUNCTION h5pset_filter_c END INTERFACE - + hdferr = h5pset_filter_c(prp_id, filter, flags, cd_nelmts, cd_values ) END SUBROUTINE h5pset_filter_f -!****s* H5P/h5pget_nfilters_f +!****s* H5P/h5pget_nfilters_f ! NAME -! h5pget_nfilters_f +! h5pget_nfilters_f ! ! PURPOSE -! Returns the number of filters in the pipeline. +! Returns the number of filters in the pipeline. ! ! INPUTS -! -! prp_id - data creation or transfer property list +! +! prp_id - data creation or transfer property list ! identifier ! OUTPUTS -! +! ! nfilters - number of filters in the pipeline -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_nfilters_f (prp_id, nfilters, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: nfilters ! The number of filters in the pipeline INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -2177,26 +2177,26 @@ CONTAINS INTEGER, INTENT(OUT) :: nfilters END FUNCTION h5pget_nfilters_c END INTERFACE - + hdferr = h5pget_nfilters_c(prp_id, nfilters) END SUBROUTINE h5pget_nfilters_f -!****s* H5P/h5pget_filter_f +!****s* H5P/h5pget_filter_f ! NAME -! h5pget_filter_f +! h5pget_filter_f ! ! PURPOSE ! Returns information about a filter in a pipeline ! ! INPUTS -! -! prp_id - data creation or transfer property list +! +! prp_id - data creation or transfer property list ! identifier ! filter_number - sequence number within the filter -! pipeline of the filter for which +! pipeline of the filter for which ! information is sought ! OUTPUTS -! +! ! filter_id - filter identification number ! flags - bit vector specifying certain general ! properties of the filter @@ -2204,25 +2204,25 @@ CONTAINS ! cd_values - auxiliary data for the filter ! namelen - number of characters in the name buffer ! name - buffer to retrieve filter name -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_filter_f(prp_id, filter_number, flags, cd_nelmts, cd_values, namelen, name, filter_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: filter_number ! Sequence number within the filter - ! pipeline of the filter for which + ! pipeline of the filter for which ! information is sought INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter. INTEGER, INTENT(OUT) :: flags ! Bit vector specifying certain general @@ -2230,7 +2230,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts ! Number of elements in cd_values. INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters in name. CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of the filter - INTEGER, INTENT(OUT) :: filter_id ! Filter identification number + INTEGER, INTENT(OUT) :: filter_id ! Filter identification number INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -2247,60 +2247,60 @@ CONTAINS IMPORT :: HID_T, SIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter_number + INTEGER, INTENT(IN) :: filter_number INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values - INTEGER, INTENT(OUT) :: flags + INTEGER, INTENT(OUT) :: flags INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts INTEGER(SIZE_T), INTENT(IN) :: namelen CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name INTEGER, INTENT(OUT) :: filter_id END FUNCTION h5pget_filter_c END INTERFACE - - hdferr = h5pget_filter_c(prp_id, filter_number, flags, cd_nelmts, & + + hdferr = h5pget_filter_c(prp_id, filter_number, flags, cd_nelmts, & cd_values, namelen, name, filter_id ) END SUBROUTINE h5pget_filter_f -!****s* H5P/h5pset_external_f +!****s* H5P/h5pset_external_f ! NAME -! h5pset_external_f +! h5pset_external_f ! ! PURPOSE -! Adds an external file to the list of external files. +! Adds an external file to the list of external files. ! ! INPUTS -! +! ! prp_id - dataset creation property list identifier ! name - name of external file -! offset - offset in bytes from the beginning of the +! offset - offset in bytes from the beginning of the ! file to the location in the file ! where the data starts -! bytes - size of the external file data. +! bytes - size of the external file data. ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows ! port). March 14, 2001 ! ! Changed type of 'offset' from integer to off_t -- MSB January 9, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5pset_external_f(prp_id, name, offset, bytes, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier CHARACTER(LEN=*), INTENT(IN) :: name ! Name of an external file - INTEGER(OFF_T), INTENT(IN) :: offset ! Offset, in bytes, from the beginning - ! of the file to the location in the file + INTEGER(OFF_T), INTENT(IN) :: offset ! Offset, in bytes, from the beginning + ! of the file to the location in the file ! where the data starts. - INTEGER(HSIZE_T), INTENT(IN) :: bytes ! Number of bytes reserved in the + INTEGER(HSIZE_T), INTENT(IN) :: bytes ! Number of bytes reserved in the ! file for the data INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -2320,43 +2320,43 @@ CONTAINS INTEGER(HSIZE_T), INTENT(IN) :: bytes END FUNCTION h5pset_external_c END INTERFACE - + namelen = LEN(name) hdferr = h5pset_external_c(prp_id, name, namelen, offset, bytes) END SUBROUTINE h5pset_external_f -!****s* H5P/h5pget_external_count_f +!****s* H5P/h5pget_external_count_f ! NAME -! h5pget_external_count_f +! h5pget_external_count_f ! ! PURPOSE -! Returns the number of external files for a dataset. +! Returns the number of external files for a dataset. ! ! INPUTS -! +! ! prp_id - dataset creation property list identifier ! OUTPUTS -! -! count - number of external files for the +! +! count - number of external files for the ! specified dataset -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_external_count_f (prp_id, count, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: count ! Number of external files for the + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: count ! Number of external files for the ! Specified dataset INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -2366,60 +2366,60 @@ CONTAINS BIND(C,NAME='h5pget_external_count_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER, INTENT(OUT) :: count END FUNCTION h5pget_external_count_c END INTERFACE - + hdferr = h5pget_external_count_c(prp_id, count) END SUBROUTINE h5pget_external_count_f -!****s* H5P/h5pget_external_f +!****s* H5P/h5pget_external_f ! NAME -! h5pget_external_f +! h5pget_external_f ! ! PURPOSE -! Returns information about an external file. +! Returns information about an external file. ! ! INPUTS -! +! ! prp_id - dataset creation property list identifier ! OUTPUTS -! -! idx - external file index +! +! idx - external file index ! name_size - maximum size of name array -! name - name of the external file +! name - name of the external file ! name - name of external file -! offset - offset in bytes from the beginning of the +! offset - offset in bytes from the beginning of the ! file to the location in the file ! where the data starts ! bytes - size of the external file data -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows ! port). March 14, 2001 ! ! Changed type of 'offset' from integer to off_t -- MSB January 9, 2012 -! +! ! Fortran90 Interface: SUBROUTINE h5pget_external_f(prp_id, idx, name_size, name, offset,bytes, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: idx ! External file index. - INTEGER(SIZE_T), INTENT(IN) :: name_size ! Maximum length of name array + INTEGER(SIZE_T), INTENT(IN) :: name_size ! Maximum length of name array CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of an external file - INTEGER(OFF_T), INTENT(OUT) :: offset ! Offset, in bytes, from the beginning - ! of the file to the location in the file + INTEGER(OFF_T), INTENT(OUT) :: offset ! Offset, in bytes, from the beginning + ! of the file to the location in the file ! where the data starts. - INTEGER(HSIZE_T), INTENT(OUT) :: bytes ! Number of bytes reserved in the + INTEGER(HSIZE_T), INTENT(OUT) :: bytes ! Number of bytes reserved in the ! file for the data INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -2431,54 +2431,54 @@ CONTAINS IMPORT :: HID_T, SIZE_T, HSIZE_T, OFF_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: idx + INTEGER, INTENT(IN) :: idx INTEGER(SIZE_T), INTENT(IN) :: name_size CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name INTEGER(OFF_T), INTENT(OUT) :: offset INTEGER(HSIZE_T), INTENT(OUT) :: bytes END FUNCTION h5pget_external_c END INTERFACE - + hdferr = h5pget_external_c(prp_id, idx, name_size, name, offset, bytes) END SUBROUTINE h5pget_external_f -!****s* H5P/h5pset_btree_ratios_f +!****s* H5P/h5pset_btree_ratios_f ! NAME -! h5pset_btree_ratios_f +! h5pset_btree_ratios_f ! ! PURPOSE -! Sets B-tree split ratios for a dataset transfer -! property list. +! Sets B-tree split ratios for a dataset transfer +! property list. ! ! INPUTS -! -! prp_id - the dataset transfer property list -! identifier -! left - the B-tree split ratio for left-most nodes +! +! prp_id - the dataset transfer property list +! identifier +! left - the B-tree split ratio for left-most nodes ! middle - the B-tree split ratio for all other nodes ! right - the B-tree split ratio for right-most nodes ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pset_btree_ratios_f(prp_id, left, middle, right, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier REAL, INTENT(IN) :: left ! The B-tree split ratio for left-most nodes. - REAL, INTENT(IN) :: middle ! The B-tree split ratio for all other nodes - REAL, INTENT(IN) :: right ! The B-tree split ratio for right-most - ! nodes and lone nodes. + REAL, INTENT(IN) :: middle ! The B-tree split ratio for all other nodes + REAL, INTENT(IN) :: right ! The B-tree split ratio for right-most + ! nodes and lone nodes. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -2493,7 +2493,7 @@ CONTAINS REAL, INTENT(IN) :: right END FUNCTION h5pset_btree_ratios_c END INTERFACE - + hdferr = h5pset_btree_ratios_c(prp_id, left, middle, right) END SUBROUTINE h5pset_btree_ratios_f @@ -2505,34 +2505,34 @@ CONTAINS ! Gets B-tree split ratios for a dataset transfer property list ! ! INPUTS -! -! prp_id - the dataset transfer property list -! identifier +! +! prp_id - the dataset transfer property list +! identifier ! OUTPUTS -! -! left - the B-tree split ratio for left-most nodes +! +! left - the B-tree split ratio for left-most nodes ! middle - the B-tree split ratio for all other nodes ! right - the B-tree split ratio for right-most nodes -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! August 12, 1999 +! August 12, 1999 ! ! HISTORY -! Explicit Fortran interfaces were added for +! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows -! port). March 14, 2001 -! +! port). March 14, 2001 +! ! Fortran90 Interface: SUBROUTINE h5pget_btree_ratios_f(prp_id, left, middle, right, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier REAL, INTENT(OUT) :: left ! The B-tree split ratio for left-most nodes. - REAL, INTENT(OUT) :: middle ! The B-tree split ratio for all other nodes - REAL, INTENT(OUT) :: right ! The B-tree split ratio for right-most + REAL, INTENT(OUT) :: middle ! The B-tree split ratio for all other nodes + REAL, INTENT(OUT) :: right ! The B-tree split ratio for right-most ! nodes and lone nodes. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -2548,43 +2548,43 @@ CONTAINS REAL, INTENT(OUT) :: right END FUNCTION h5pget_btree_ratios_c END INTERFACE - + hdferr = h5pget_btree_ratios_c(prp_id, left, middle, right) END SUBROUTINE h5pget_btree_ratios_f -!****s* H5P/h5pget_fclose_degree_f +!****s* H5P/h5pget_fclose_degree_f ! NAME -! h5pget_fclose_degree_f +! h5pget_fclose_degree_f ! ! PURPOSE ! Returns the degree for the file close behavior. ! ! INPUTS -! +! ! fapl_id - File access property list identifier ! OUTPUTS -! +! ! degree - Possible values are: ! H5F_CLOSE_DEFAULT_F ! H5F_CLOSE_WEAK_F ! H5F_CLOSE_SEMI_F ! H5F_CLOSE_STRONG_F -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! September 26, 2002 +! September 26, 2002 ! ! HISTORY -! -! +! +! ! Fortran90 Interface: SUBROUTINE h5pget_fclose_degree_f(fapl_id, degree, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier - INTEGER, INTENT(OUT) :: degree ! Possible values are: + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier + INTEGER, INTENT(OUT) :: degree ! Possible values are: ! H5F_CLOSE_DEFAULT_F ! H5F_CLOSE_WEAK_F ! H5F_CLOSE_SEMI_F @@ -2601,19 +2601,19 @@ CONTAINS INTEGER, INTENT(OUT) :: degree END FUNCTION h5pget_fclose_degree_c END INTERFACE - - hdferr = h5pget_fclose_degree_c(fapl_id, degree) + + hdferr = h5pget_fclose_degree_c(fapl_id, degree) END SUBROUTINE h5pget_fclose_degree_f -!****s* H5P/h5pset_fclose_degree_f +!****s* H5P/h5pset_fclose_degree_f ! NAME -! h5pset_fclose_degree_f +! h5pset_fclose_degree_f ! ! PURPOSE ! Sets the degree for the file close behavior. ! ! INPUTS -! +! ! fapl_id - file access property list identifier ! degree - Possible values are: ! H5F_CLOSE_DEFAULT_F @@ -2621,19 +2621,19 @@ CONTAINS ! H5F_CLOSE_SEMI_F ! H5F_CLOSE_STRONG_F ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! September 26, 2002 +! September 26, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pset_fclose_degree_f(fapl_id, degree, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier - INTEGER, INTENT(IN) :: degree ! Possible values are: + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier + INTEGER, INTENT(IN) :: degree ! Possible values are: ! H5F_CLOSE_DEFAULT_F ! H5F_CLOSE_WEAK_F ! H5F_CLOSE_SEMI_F @@ -2651,43 +2651,43 @@ CONTAINS END FUNCTION h5pset_fclose_degree_c END INTERFACE - hdferr = h5pset_fclose_degree_c(fapl_id, degree) + hdferr = h5pset_fclose_degree_c(fapl_id, degree) END SUBROUTINE h5pset_fclose_degree_f -!****s* H5P/h5pequal_f +!****s* H5P/h5pequal_f ! NAME -! h5pequal_f +! h5pequal_f ! ! PURPOSE ! Checks if two property lists are eqaul ! ! INPUTS -! +! ! plist1_id - property list identifier ! plist2_id - property list identifier ! OUTPUTS -! +! ! flag - flag, possible values ! .TRUE. or .FALSE. -! hdferr: - error code +! hdferr: - error code ! Success: 0 -! Failure: -1, flag is set to .FALSE. +! Failure: -1, flag is set to .FALSE. ! ! AUTHOR ! Elena Pourmal -! September 30, 2002 +! September 30, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pequal_f(plist1_id, plist2_id, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist1_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: plist2_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: plist1_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: plist2_id ! Property list identifier LOGICAL, INTENT(OUT) :: flag ! Flag INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** INTEGER :: c_flag - + INTERFACE INTEGER FUNCTION h5pequal_c(plist1_id, plist2_id, c_flag) & BIND(C,NAME='h5pequal_c') @@ -2700,36 +2700,36 @@ CONTAINS END INTERFACE flag = .FALSE. - hdferr = h5pequal_c(plist1_id, plist2_id, c_flag) + hdferr = h5pequal_c(plist1_id, plist2_id, c_flag) IF (c_flag .GT. 0) flag = .TRUE. END SUBROUTINE h5pequal_f !****s* H5P/h5pset_buffer_f ! NAME -! h5pset_buffer_f +! h5pset_buffer_f ! ! PURPOSE ! Sets sixe for conversion buffer ! ! INPUTS ! plist_id - data transfer property list identifier -! size - buffer size +! size - buffer size ! OUTPUTS -! -! hdferr: - error code +! +! hdferr: - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 2, 2002 +! October 2, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pset_buffer_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: size ! Buffer size in bytes; - ! buffer is allocated and freed by + INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Buffer size in bytes; + ! buffer is allocated and freed by ! the library. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -2745,36 +2745,36 @@ CONTAINS END FUNCTION h5pset_buffer_c END INTERFACE - hdferr = h5pset_buffer_c(plist_id, size) + hdferr = h5pset_buffer_c(plist_id, size) END SUBROUTINE h5pset_buffer_f !****s* H5P/h5pget_buffer_f ! NAME -! h5pget_buffer_f +! h5pget_buffer_f ! ! PURPOSE ! Gets size for conversion buffer ! ! INPUTS -! +! ! plist_id - data transfer property list identifier ! OUTPUTS -! -! size - buffer size -! hdferr - error code +! +! size - buffer size +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 2, 2002 +! October 2, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_buffer_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: size ! Buffer size in bytes; - ! buffer is allocated and freed by + INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Buffer size in bytes; + ! buffer is allocated and freed by ! the library. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -2790,7 +2790,7 @@ CONTAINS END FUNCTION h5pget_buffer_c END INTERFACE - hdferr = h5pget_buffer_c(plist_id, size) + hdferr = h5pget_buffer_c(plist_id, size) END SUBROUTINE h5pget_buffer_f !****s* H5P/h5pfill_value_defined_f @@ -2801,17 +2801,17 @@ CONTAINS ! Check if fill value is defined. ! ! INPUTS -! +! ! plist_id - dataset creation property list identifier ! OUTPUTS -! +! ! flag - fill value status flag ! Possible values are: ! H5D_FILL_VALUE_ERROR_F ! H5D_FILL_VALUE_UNDEFINED_F ! H5D_FILL_VALUE_DEFAULT_F ! H5D_FILL_VALUE_USER_DEFINED_F -! hdferr - error code +! hdferr - error code ! Success: 0 ! Failure: -1 ! @@ -2841,7 +2841,7 @@ CONTAINS END FUNCTION h5pfill_value_defined_c END INTERFACE - hdferr = h5pfill_value_defined_c(plist_id, flag) + hdferr = h5pfill_value_defined_c(plist_id, flag) END SUBROUTINE h5pfill_value_defined_f !****s* H5P/h5pset_alloc_time_f @@ -2852,7 +2852,7 @@ CONTAINS ! Set space allocation time for dataset during creation. ! ! INPUTS -! +! ! plist_id - dataset creation property list identifier ! flag - allocation time flag: ! H5D_ALLOC_TIME_ERROR_F @@ -2861,14 +2861,14 @@ CONTAINS ! H5D_ALLOC_TIME_LATE_F ! H5D_ALLOC_TIME_INCR_F ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 4, 2002 +! October 4, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pset_alloc_time_f(plist_id, flag, hdferr) @@ -2882,8 +2882,8 @@ CONTAINS ! H5D_ALLOC_TIME_INCR_F INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** - +!***** + INTERFACE INTEGER FUNCTION h5pset_alloc_time_c(plist_id, flag) & BIND(C,NAME='h5pset_alloc_time_c') @@ -2893,8 +2893,8 @@ CONTAINS INTEGER, INTENT(IN) :: flag END FUNCTION h5pset_alloc_time_c END INTERFACE - - hdferr = h5pset_alloc_time_c(plist_id, flag) + + hdferr = h5pset_alloc_time_c(plist_id, flag) END SUBROUTINE h5pset_alloc_time_f !****s* H5P/h5pget_alloc_time_f @@ -2905,23 +2905,23 @@ CONTAINS ! Get space allocation time for dataset during creation. ! ! INPUTS -! +! ! plist_id - dataset creation property list identifier ! OUTPUTS -! +! ! flag - allocation time flag: ! H5D_ALLOC_TIME_ERROR_F ! H5D_ALLOC_TIME_DEFAULT_F ! H5D_ALLOC_TIME_EARLY_F ! H5D_ALLOC_TIME_LATE_F ! H5D_ALLOC_TIME_INCR_F -! hdferr: - error code +! hdferr: - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 4, 2002 +! October 4, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_alloc_time_f(plist_id, flag, hdferr) @@ -2946,8 +2946,8 @@ CONTAINS INTEGER, INTENT(OUT) :: flag END FUNCTION h5pget_alloc_time_c END INTERFACE - - hdferr = h5pget_alloc_time_c(plist_id, flag) + + hdferr = h5pget_alloc_time_c(plist_id, flag) END SUBROUTINE h5pget_alloc_time_f !****s* H5P/h5pset_fill_time_f @@ -2958,21 +2958,21 @@ CONTAINS ! Set fill value writing time for dataset ! ! INPUTS -! +! ! plist_id - dataset creation property list identifier ! flag - fill time flag: ! H5D_FILL_TIME_ERROR_F ! H5D_FILL_TIME_ALLOC_F ! H5D_FILL_TIME_NEVER_F ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 4, 2002 +! October 4, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pset_fill_time_f(plist_id, flag, hdferr) @@ -2984,7 +2984,7 @@ CONTAINS ! H5D_FILL_TIME_NEVER_F INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTERFACE INTEGER FUNCTION h5pset_fill_time_c(plist_id, flag) & @@ -2995,8 +2995,8 @@ CONTAINS INTEGER, INTENT(IN) :: flag END FUNCTION h5pset_fill_time_c END INTERFACE - - hdferr = h5pset_fill_time_c(plist_id, flag) + + hdferr = h5pset_fill_time_c(plist_id, flag) END SUBROUTINE h5pset_fill_time_f !****s* H5P/h5pget_fill_time_f @@ -3007,11 +3007,11 @@ CONTAINS ! Get fill value writing time for dataset ! ! INPUTS -! +! ! plist_id - dataset creation property list identifier ! OUTPUTS -! -! hdferr: - error code +! +! hdferr: - error code ! Success: 0 ! Failure: -1 ! OPTIONAL PARAMETERS @@ -3022,7 +3022,7 @@ CONTAINS ! H5D_FILL_TIME_NEVER_F ! AUTHOR ! Elena Pourmal -! October 4, 2002 +! October 4, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_fill_time_f(plist_id, flag, hdferr) @@ -3034,8 +3034,8 @@ CONTAINS ! H5D_FILL_TIME_NEVER_F INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** - +!***** + INTERFACE INTEGER FUNCTION h5pget_fill_time_c(plist_id, flag) & BIND(C,NAME='h5pget_fill_time_c') @@ -3045,36 +3045,36 @@ CONTAINS INTEGER, INTENT(OUT) :: flag END FUNCTION h5pget_fill_time_c END INTERFACE - - hdferr = h5pget_fill_time_c(plist_id, flag) + + hdferr = h5pget_fill_time_c(plist_id, flag) END SUBROUTINE h5pget_fill_time_f -!****s* H5P/ h5pset_meta_block_size_f +!****s* H5P/ h5pset_meta_block_size_f ! NAME -! h5pset_meta_block_size_f +! h5pset_meta_block_size_f ! ! PURPOSE -! Sets the minimum size of metadata block allocations +! Sets the minimum size of metadata block allocations ! ! INPUTS -! +! ! plist_id - file access property list identifier ! size - metatdata block size ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 7, 2002 +! October 7, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pset_meta_block_size_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: size ! Block size in bytes; + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Block size in bytes; INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -3087,78 +3087,78 @@ CONTAINS INTEGER(HSIZE_T), INTENT(IN) :: size END FUNCTION h5pset_meta_block_size_c END INTERFACE - - hdferr = h5pset_meta_block_size_c(plist_id, size) + + hdferr = h5pset_meta_block_size_c(plist_id, size) END SUBROUTINE h5pset_meta_block_size_f -!****s* H5P/h5pget_meta_block_size_f +!****s* H5P/h5pget_meta_block_size_f ! NAME -! h5pget_meta_block_size_f +! h5pget_meta_block_size_f ! ! PURPOSE -! Gets the minimum size of metadata block allocations +! Gets the minimum size of metadata block allocations ! ! INPUTS -! +! ! plist_id - file access property list identifier ! OUTPUTS -! +! ! size - metatdata block size -! hdferr - error code +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 7, 2002 +! October 7, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_meta_block_size_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: size ! Block size in bytes; + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Block size in bytes; INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** INTERFACE INTEGER FUNCTION h5pget_meta_block_size_c(plist_id, size) & BIND(C,NAME='h5pget_meta_block_size_c') - IMPORT :: HID_T, HSIZE_T + IMPORT :: HID_T, HSIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: plist_id INTEGER(HSIZE_T), INTENT(OUT) :: size END FUNCTION h5pget_meta_block_size_c END INTERFACE - - hdferr = h5pget_meta_block_size_c(plist_id, size) + + hdferr = h5pget_meta_block_size_c(plist_id, size) END SUBROUTINE h5pget_meta_block_size_f -!****s* H5P/h5pset_sieve_buf_size_f +!****s* H5P/h5pset_sieve_buf_size_f ! NAME -! h5pset_sieve_buf_size_f +! h5pset_sieve_buf_size_f ! ! PURPOSE ! Sets the maximum size of the data sieve buffer ! ! INPUTS -! +! ! plist_id - file access property list identifier ! size - sieve buffer size ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 7, 2002 +! October 7, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pset_sieve_buf_size_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(SIZE_T), INTENT(IN) :: size ! Buffer size in bytes; + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(IN) :: size ! Buffer size in bytes; INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -3171,36 +3171,36 @@ CONTAINS INTEGER(SIZE_T), INTENT(IN) :: size END FUNCTION h5pset_sieve_buf_size_c END INTERFACE - - hdferr = h5pset_sieve_buf_size_c(plist_id, size) + + hdferr = h5pset_sieve_buf_size_c(plist_id, size) END SUBROUTINE h5pset_sieve_buf_size_f !****s* H5P/h5pget_sieve_buf_size_f ! NAME -! h5pget_sieve_buf_size_f +! h5pget_sieve_buf_size_f ! ! PURPOSE ! Gets the maximum size of the data sieve buffer ! ! INPUTS -! +! ! plist_id - file access property list identifier ! OUTPUTS -! +! ! size - sieve buffer size -! hdferr - error code +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 7, 2002 +! October 7, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_sieve_buf_size_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: size ! Buffer size in bytes + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: size ! Buffer size in bytes INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -3213,35 +3213,35 @@ CONTAINS INTEGER(SIZE_T), INTENT(OUT) :: size END FUNCTION h5pget_sieve_buf_size_c END INTERFACE - - hdferr = h5pget_sieve_buf_size_c(plist_id, size) + + hdferr = h5pget_sieve_buf_size_c(plist_id, size) END SUBROUTINE h5pget_sieve_buf_size_f -!****s* H5P/h5pset_small_data_block_size_f +!****s* H5P/h5pset_small_data_block_size_f ! NAME -! h5pset_small_data_block_size_f +! h5pset_small_data_block_size_f ! ! PURPOSE ! Sets the minimum size of "small" raw data block ! ! INPUTS -! +! ! plist_id - file access property list identifier ! size - small raw data block size ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 7, 2002 +! October 7, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pset_small_data_block_size_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier INTEGER(HSIZE_T), INTENT(IN) :: size ! Small raw data block size INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -3256,34 +3256,34 @@ CONTAINS END FUNCTION h5pset_small_data_block_size_c END INTERFACE - hdferr = h5pset_small_data_block_size_c(plist_id, size) + hdferr = h5pset_small_data_block_size_c(plist_id, size) END SUBROUTINE h5pset_small_data_block_size_f -!****s* H5P/h5pget_small_data_block_size_f +!****s* H5P/h5pget_small_data_block_size_f ! NAME -! h5pget_small_data_block_size_f +! h5pget_small_data_block_size_f ! ! PURPOSE ! Gets the minimum size of "small" raw data block ! ! INPUTS -! +! ! plist_id - file access property list identifier ! OUTPUTS -! +! ! size - small raw data block size -! hdferr - error code +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 7, 2002 +! October 7, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_small_data_block_size_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier INTEGER(HSIZE_T), INTENT(OUT) :: size ! Small raw data block size INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -3297,35 +3297,35 @@ CONTAINS INTEGER(HSIZE_T), INTENT(OUT) :: size END FUNCTION h5pget_small_data_block_size_c END INTERFACE - - hdferr = h5pget_small_data_block_size_c(plist_id, size) + + hdferr = h5pget_small_data_block_size_c(plist_id, size) END SUBROUTINE h5pget_small_data_block_size_f -!****s* H5P/h5pset_hyper_vector_size_f +!****s* H5P/h5pset_hyper_vector_size_f ! NAME -! h5pset_hyper_vector_size_f +! h5pset_hyper_vector_size_f ! ! PURPOSE ! Set the number of "I/O" vectors (vector size) ! ! INPUTS -! +! ! plist_id - dataset transfer property list identifier ! size - vector size ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 7, 2002 +! October 7, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pset_hyper_vector_size_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier INTEGER(SIZE_T), INTENT(IN) :: size ! Vector size INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -3339,35 +3339,35 @@ CONTAINS INTEGER(SIZE_T), INTENT(IN) :: size END FUNCTION h5pset_hyper_vector_size_c END INTERFACE - - hdferr = h5pset_hyper_vector_size_c(plist_id, size) + + hdferr = h5pset_hyper_vector_size_c(plist_id, size) END SUBROUTINE h5pset_hyper_vector_size_f -!****s* H5P/ h5pget_hyper_vector_size_f +!****s* H5P/ h5pget_hyper_vector_size_f ! NAME -! h5pget_hyper_vector_size_f +! h5pget_hyper_vector_size_f ! ! PURPOSE ! Get the number of "I/O" vectors (vector size) ! ! INPUTS -! +! ! plist_id - dataset transfer property list identifier ! OUTPUTS -! +! ! size - vector size -! hdferr - error code +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 7, 2002 +! October 7, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_hyper_vector_size_f(plist_id, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier INTEGER(SIZE_T), INTENT(OUT) :: size ! Vector size INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -3382,42 +3382,42 @@ CONTAINS END FUNCTION h5pget_hyper_vector_size_c END INTERFACE - hdferr = h5pget_hyper_vector_size_c(plist_id, size) + hdferr = h5pget_hyper_vector_size_c(plist_id, size) END SUBROUTINE h5pget_hyper_vector_size_f -!****s* H5P/h5pexist_f +!****s* H5P/h5pexist_f ! NAME -! h5pexist_f +! h5pexist_f ! ! PURPOSE -! Queries whether a property name exists in a property list or class. +! Queries whether a property name exists in a property list or class. ! ! INPUTS -! +! ! prp_id - property list identifier to query ! name - name of property to check for ! OUTPUTS -! +! ! flag - logical flag -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pexist_f(prp_id, name, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify LOGICAL, INTENT(OUT) :: flag ! .TRUE. if exists, .FALSE. otherwise INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** INTEGER :: name_len - + INTERFACE INTEGER FUNCTION h5pexist_c(prp_id, name, name_len) & BIND(C,NAME='h5pexist_c') @@ -3438,43 +3438,43 @@ CONTAINS ENDIF END SUBROUTINE h5pexist_f -!****s* H5P/h5pget_size_f +!****s* H5P/h5pget_size_f ! ! NAME -! h5pget_size_f +! h5pget_size_f ! ! PURPOSE ! Queries the size of a property value in bytes. ! ! INPUTS -! +! ! prp_id - property list identifier to query ! name - name of property to query ! OUTPUTS -! +! ! size - size of property in bytes -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! HISTORY -! -! +! +! ! Fortran90 Interface: SUBROUTINE h5pget_size_f(prp_id, name, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to query INTEGER(SIZE_T), INTENT(OUT) :: size ! Size in bytes INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** INTEGER :: name_len - + INTERFACE INTEGER FUNCTION h5pget_size_c(prp_id, name, name_len, size) & BIND(C,NAME='h5pget_size_c') @@ -3491,31 +3491,31 @@ CONTAINS hdferr = h5pget_size_c(prp_id, name , name_len, size) END SUBROUTINE h5pget_size_f -!****s* H5P/h5pget_npros_f +!****s* H5P/h5pget_npros_f ! NAME -! h5pget_npros_f +! h5pget_npros_f ! ! PURPOSE ! Queries number of properties in property list or class ! ! INPUTS -! +! ! prp_id - iproperty list identifier to query ! OUTPUTS -! +! ! nprops - number of properties in property object -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_nprops_f(prp_id, nprops, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(SIZE_T), INTENT(OUT) :: nprops ! Number of properties INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -3532,18 +3532,18 @@ CONTAINS hdferr = h5pget_nprops_c(prp_id, nprops) END SUBROUTINE h5pget_nprops_f -!****s* H5P/h5pget_class_name_f +!****s* H5P/h5pget_class_name_f ! NAME -! h5pget_class_name_f +! h5pget_class_name_f ! ! PURPOSE ! Queries the name of a class. ! ! INPUTS -! +! ! prp_id - property list identifier to query ! OUTPUTS -! +! ! name - name of a class ! size - Actual length of the class name ! NOTE: If provided buffer "name" is smaller, @@ -3551,26 +3551,26 @@ CONTAINS ! provided user buffer. ! hdferr: - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! HISTORY -! Returned the size of name as an argument -! +! Returned the size of name as an argument +! ! Fortran90 Interface: SUBROUTINE h5pget_class_name_f(prp_id, name, size, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier CHARACTER(LEN=*), INTENT(OUT) :: name ! Buffer to retireve class name INTEGER, INTENT(OUT) :: size ! Actual length of the class name INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** INTEGER :: name_len - + INTERFACE INTEGER FUNCTION h5pget_class_name_c(prp_id, name, name_len) & BIND(C,NAME='h5pget_class_name_c') @@ -3582,42 +3582,42 @@ CONTAINS INTEGER, INTENT(IN) :: name_len END FUNCTION h5pget_class_name_c END INTERFACE - + name_len = LEN(name) size = h5pget_class_name_c(prp_id, name, name_len) - + hdferr = 0 IF(size.LT.0) hdferr = -1 - + END SUBROUTINE h5pget_class_name_f -!****s* H5P/h5pget_class_parent_f +!****s* H5P/h5pget_class_parent_f ! NAME -! h5pget_class_parent_f +! h5pget_class_parent_f ! ! PURPOSE -! Retrieves the parent class of a genric property class. +! Retrieves the parent class of a genric property class. ! ! INPUTS -! +! ! prp_id - property list identifier to query ! OUTPUTS -! +! ! parent_id - identifier of the parent class -! hdferr: - error code +! hdferr: - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pget_class_parent_f(prp_id, parent_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(OUT) :: parent_id ! Parent class property list - ! identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: parent_id ! Parent class property list + ! identifier INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -3633,32 +3633,32 @@ CONTAINS hdferr = h5pget_class_parent_c(prp_id, parent_id) END SUBROUTINE h5pget_class_parent_f -!****s* H5P/h5pisa_class_f +!****s* H5P/h5pisa_class_f ! NAME -! h5pisa_class_f +! h5pisa_class_f ! ! PURPOSE -! Determines whether a property list is a member of a class. +! Determines whether a property list is a member of a class. ! ! INPUTS -! -! plist - property list identifier +! +! plist - property list identifier ! pclass - identifier of the property class ! OUTPUTS -! +! ! flag - .TRUE. if a member, .FALSE. otherwise -! hdferr: - error code +! hdferr: - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pisa_class_f(plist, pclass, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier INTEGER(HID_T), INTENT(IN) :: pclass ! Class identifier LOGICAL, INTENT(OUT) :: flag ! logical flag INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -3681,40 +3681,40 @@ CONTAINS ENDIF END SUBROUTINE h5pisa_class_f -!****s* H5P/h5pcopy_prop_f +!****s* H5P/h5pcopy_prop_f ! NAME -! h5pcopy_prop_f +! h5pcopy_prop_f ! ! PURPOSE ! Copies a property from one list or class to another. ! ! INPUTS -! +! ! dst_id - Identifier of the destination property list -! src_id - Identifier of the source property list +! src_id - Identifier of the source property list ! name - name of the property to copy ! OUTPUTS -! +! ! hdferr: - error code -! Success: 0 -! Failure: -1 +! Success: 0 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pcopy_prop_f(dst_id, src_id, name, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dst_id ! Destination property list - ! identifier - INTEGER(HID_T), INTENT(IN) :: src_id ! Source property list identifier + INTEGER(HID_T), INTENT(IN) :: dst_id ! Destination property list + ! identifier + INTEGER(HID_T), INTENT(IN) :: src_id ! Source property list identifier CHARACTER(LEN=*), INTENT(IN) :: name ! Property name INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** INTEGER :: name_len - + INTERFACE INTEGER FUNCTION h5pcopy_prop_c(dst_id, src_id, name, name_len) & BIND(C,NAME='h5pcopy_prop_c') @@ -3731,27 +3731,27 @@ CONTAINS hdferr = h5pcopy_prop_c(dst_id, src_id, name , name_len) END SUBROUTINE h5pcopy_prop_f -!****s* H5P/h5premove_f +!****s* H5P/h5premove_f ! NAME -! h5premove_f +! h5premove_f ! ! PURPOSE -! Removes a property from a property list. +! Removes a property from a property list. ! ! INPUTS -! +! ! plid - Property list identofoer ! name - name of the property to remove ! OUTPUTS -! +! ! hdferr: - error code -! Success: 0 -! Failure: -1 +! Success: 0 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! Fortran90 Interface: SUBROUTINE h5premove_f(plid, name, hdferr) @@ -3762,14 +3762,14 @@ CONTAINS ! 0 on success and -1 on failure !***** INTEGER :: name_len - + INTERFACE INTEGER FUNCTION h5premove_c(plid, name, name_len) & BIND(C,NAME='h5premove_c') IMPORT :: C_CHAR IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plid + INTEGER(HID_T), INTENT(IN) :: plid CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name INTEGER, INTENT(IN) :: name_len END FUNCTION h5premove_c @@ -3778,26 +3778,26 @@ CONTAINS hdferr = h5premove_c(plid, name , name_len) END SUBROUTINE h5premove_f -!****s* H5P/h5punregister_f +!****s* H5P/h5punregister_f ! NAME -! h5punregister_f +! h5punregister_f ! ! PURPOSE -! Removes a property from a property list class. +! Removes a property from a property list class. ! ! INPUTS -! +! ! class - Property list class identifier ! name - name of the property to remove ! OUTPUTS -! +! ! hdferr: - error code -! Success: 0 -! Failure: -1 +! Success: 0 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! Fortran90 Interface: SUBROUTINE h5punregister_f(class, name, hdferr) @@ -3824,25 +3824,25 @@ CONTAINS hdferr = h5punregister_c(class, name , name_len) END SUBROUTINE h5punregister_f -!****s* H5P/h5pclose_class_f +!****s* H5P/h5pclose_class_f ! NAME -! h5pclose_class_f +! h5pclose_class_f ! ! PURPOSE ! Closes an existing property list class. ! ! INPUTS -! +! ! class - Property list class identifier ! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 +! +! hdferr - error code +! Success: 0 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal -! October 9, 2002 +! October 9, 2002 ! ! Fortran90 Interface: SUBROUTINE h5pclose_class_f(class, hdferr) @@ -3862,9 +3862,9 @@ CONTAINS hdferr = h5pclose_class_c(class) END SUBROUTINE h5pclose_class_f -!****s* H5P/h5pset_shuffle_f +!****s* H5P/h5pset_shuffle_f ! NAME -! h5pset_shuffle_f +! h5pset_shuffle_f ! ! PURPOSE ! Sets shuffling filter @@ -3872,9 +3872,9 @@ CONTAINS ! INPUTS ! prp_id - dataset creation property list identifier ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -3883,7 +3883,7 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pset_shuffle_f(prp_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -3896,26 +3896,26 @@ CONTAINS END FUNCTION h5pset_shuffle_c END INTERFACE hdferr = h5pset_shuffle_c(prp_id) - + END SUBROUTINE h5pset_shuffle_f -!****s* H5P/h5pset_edc_check_f +!****s* H5P/h5pset_edc_check_f ! NAME -! h5pset_edc_check_f +! h5pset_edc_check_f ! ! PURPOSE -! Enables/disables error detecting +! Enables/disables error detecting ! ! INPUTS -! +! ! prp_id - dataset creation property list identifier ! flag - EDC flag; possible values: ! H5Z_DISABLE_EDC_F ! H5Z_ENABLE_EDC_F ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -3924,7 +3924,7 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pset_edc_check_f(prp_id, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: flag ! Checksum filter flag INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -3935,27 +3935,27 @@ CONTAINS IMPORT :: HID_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: flag + INTEGER, INTENT(IN) :: flag END FUNCTION h5pset_edc_check_c END INTERFACE hdferr = h5pset_edc_check_c(prp_id, flag) - + END SUBROUTINE h5pset_edc_check_f !****s* H5P/h5pget_edc_check_f ! NAME -! h5pget_edc_check_f +! h5pget_edc_check_f ! ! PURPOSE -! Queries error detecting +! Queries error detecting ! ! INPUTS -! +! ! prp_id - dataset creation property list identifier ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -3964,7 +3964,7 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pget_edc_check_f(prp_id, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset transfer property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset transfer property list identifier INTEGER, INTENT(OUT) :: flag ! Checksum filter flag ! May have one of the following values: ! H5Z_ERROR_EDC_F @@ -3984,24 +3984,24 @@ CONTAINS END FUNCTION h5pget_edc_check_c END INTERFACE hdferr = h5pget_edc_check_c(prp_id, flag) - + END SUBROUTINE h5pget_edc_check_f !****s* H5P/h5pset_fletcher32_f ! NAME -! h5pset_fletcher32_f +! h5pset_fletcher32_f ! ! PURPOSE -! Sets Fletcher32 checksum of EDC for a dataset creation +! Sets Fletcher32 checksum of EDC for a dataset creation ! property list. ! ! INPUTS -! +! ! prp_id - dataset creation property list identifier ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -4010,7 +4010,7 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pset_fletcher32_f(prp_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure !***** @@ -4028,19 +4028,19 @@ CONTAINS !****s* H5P/ h5pset_family_offset_f ! NAME -! h5pset_family_offset_f +! h5pset_family_offset_f ! ! PURPOSE ! Sets offset for family file driver. ! ! INPUTS -! +! ! prp_id - file creation property list identifier ! offset - file offset ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -4049,42 +4049,42 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pset_family_offset_f(prp_id, offset, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER(HSIZE_T), INTENT(IN) :: offset ! Offset in bytes INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTERFACE INTEGER FUNCTION h5pset_family_offset_c(prp_id, offset) & BIND(C,NAME='h5pset_family_offset_c') IMPORT :: HID_T, HSIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HSIZE_T), INTENT(IN) :: offset + INTEGER(HSIZE_T), INTENT(IN) :: offset END FUNCTION h5pset_family_offset_c END INTERFACE hdferr = h5pset_family_offset_c(prp_id, offset) - + END SUBROUTINE h5pset_family_offset_f !****s* H5P/h5pset_fapl_multi_l ! NAME -! h5pset_fapl_multi_l +! h5pset_fapl_multi_l ! ! PURPOSE -! Sets up use of the multi-file driver. +! Sets up use of the multi-file driver. ! ! INPUTS -! +! ! prp_id - file creation property list identifier ! mem_map - mapping array ! memb_fapl - property list for each memory usage type ! memb_name - names of member file -! relax - flag +! relax - flag ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -4097,10 +4097,10 @@ CONTAINS INTEGER, DIMENSION(*), INTENT(IN) :: memb_map INTEGER(HID_T), DIMENSION(*), INTENT(IN) :: memb_fapl CHARACTER(LEN=*), DIMENSION(*), INTENT(IN) :: memb_name - REAL, DIMENSION(*), INTENT(IN) :: memb_addr + REAL, DIMENSION(*), INTENT(IN) :: memb_addr LOGICAL, INTENT(IN) :: relax INTEGER, INTENT(OUT) :: hdferr -!***** +!***** INTEGER, DIMENSION(1:H5FD_MEM_NTYPES_F) :: lenm INTEGER :: maxlen INTEGER :: flag = 0 @@ -4113,7 +4113,7 @@ CONTAINS IMPORT :: C_CHAR IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier INTEGER, DIMENSION(*), INTENT(IN) :: memb_map INTEGER(HID_T), DIMENSION(*), INTENT(IN) :: memb_fapl CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: memb_name @@ -4132,21 +4132,21 @@ CONTAINS hdferr = h5pset_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, maxlen, memb_addr, flag) END SUBROUTINE h5pset_fapl_multi_l -!****s* H5P/h5pset_fapl_multi_s +!****s* H5P/h5pset_fapl_multi_s ! NAME -! h5pset_fapl_multi_s +! h5pset_fapl_multi_s ! ! PURPOSE -! Sets up use of the multi-file driver. +! Sets up use of the multi-file driver. ! ! INPUTS -! +! ! prp_id - file creation property list identifier -! relax - flag +! relax - flag ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -4155,11 +4155,11 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pset_fapl_multi_s(prp_id, relax, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier LOGICAL, INTENT(IN) :: relax INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTEGER :: flag INTERFACE @@ -4167,37 +4167,37 @@ CONTAINS BIND(C,NAME='h5pset_fapl_multi_sc') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier INTEGER, INTENT(IN) :: flag END FUNCTION h5pset_fapl_multi_sc END INTERFACE flag = 0 IF (relax) flag = 1 - hdferr = h5pset_fapl_multi_sc(prp_id, flag) - + hdferr = h5pset_fapl_multi_sc(prp_id, flag) + END SUBROUTINE h5pset_fapl_multi_s -!****s* H5P/h5pget_fapl_multi_f +!****s* H5P/h5pget_fapl_multi_f ! NAME -! h5pget_fapl_multi_f +! h5pget_fapl_multi_f ! ! PURPOSE -! Sets up use of the multi-file driver. +! Sets up use of the multi-file driver. ! ! INPUTS -! +! ! prp_id - file creation property list identifier ! OUTPUTS -! +! ! mem_map - mapping array ! memb_fapl - property list for each memory usage type ! memb_name - names of member file -! relax - flag -! hdferr - error code +! relax - flag +! hdferr - error code ! Success: 0 ! Failure: -1 ! ! OPTIONAL PARAMETERS -! maxlen_out - maximum length for memb_name array element +! maxlen_out - maximum length for memb_name array element ! ! AUTHOR ! Elena Pourmal @@ -4206,19 +4206,19 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pget_fapl_multi_f(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr, maxlen_out) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier INTEGER, DIMENSION(*), INTENT(OUT) :: memb_map INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: memb_fapl CHARACTER(LEN=*), DIMENSION(*), INTENT(OUT) :: memb_name REAL, DIMENSION(*), INTENT(OUT) :: memb_addr - INTEGER, OPTIONAL, INTENT(OUT) :: maxlen_out + INTEGER, OPTIONAL, INTENT(OUT) :: maxlen_out LOGICAL, INTENT(OUT) :: relax INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTEGER, DIMENSION(1:H5FD_MEM_NTYPES_F) :: lenm INTEGER :: maxlen - INTEGER :: c_maxlen_out + INTEGER :: c_maxlen_out INTEGER :: flag INTEGER :: i ! @@ -4229,14 +4229,14 @@ CONTAINS IMPORT :: C_CHAR IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier INTEGER, DIMENSION(*), INTENT(OUT) :: memb_map INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: memb_fapl CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: memb_name REAL, DIMENSION(*), INTENT(OUT) :: memb_addr INTEGER, DIMENSION(*) :: lenm INTEGER :: maxlen - INTEGER :: c_maxlen_out + INTEGER :: c_maxlen_out INTEGER, INTENT(OUT) :: flag END FUNCTION h5pget_fapl_multi_c END INTERFACE @@ -4246,20 +4246,20 @@ CONTAINS lenm(i) = LEN_TRIM(memb_name(i)) ENDDO hdferr = h5pget_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, maxlen, memb_addr, flag, c_maxlen_out) - + relax = .TRUE. IF(flag .EQ. 0) relax = .FALSE. IF(PRESENT(maxlen_out)) maxlen_out = c_maxlen_out END SUBROUTINE h5pget_fapl_multi_f -!****s* H5P/h5pset_szip_f +!****s* H5P/h5pset_szip_f ! NAME -! h5pset_szip_f +! h5pset_szip_f ! ! PURPOSE ! Sets up use of szip compression ! ! INPUTS -! +! ! prp_id - dataset creation property list identifier ! options_mask - A bit-mask conveying the desired SZIP options. ! Current valid values in Fortran are: @@ -4267,25 +4267,25 @@ CONTAINS ! H5_SZIP_NN_OM_F ! pixels_per_block - szip parameters ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal ! April 10 2003 ! ! Fortran90 Interface: - SUBROUTINE h5pset_szip_f(prp_id, options_mask, pixels_per_block, hdferr) + SUBROUTINE h5pset_szip_f(prp_id, options_mask, pixels_per_block, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property - ! list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property + ! list identifier INTEGER, INTENT(IN) :: options_mask ! A bit-mask conveying the desired ! SZIP options ! Current valid values in Fortran are: ! H5_SZIP_EC_OM_F ! H5_SZIP_NN_OM_F - INTEGER, INTENT(IN) :: pixels_per_block ! The number of pixels or data elements + INTEGER, INTENT(IN) :: pixels_per_block ! The number of pixels or data elements ! in each data block INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure @@ -4295,33 +4295,33 @@ CONTAINS BIND(C,NAME='h5pset_szip_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier INTEGER, INTENT(IN) :: options_mask INTEGER, INTENT(IN) :: pixels_per_block END FUNCTION h5pset_szip_c END INTERFACE - hdferr = h5pset_szip_c(prp_id, options_mask, pixels_per_block) - + hdferr = h5pset_szip_c(prp_id, options_mask, pixels_per_block) + END SUBROUTINE h5pset_szip_f -!****s* H5P/h5pall_filters_avail_f +!****s* H5P/h5pall_filters_avail_f ! NAME -! h5pall_filters_avail_f +! h5pall_filters_avail_f ! ! PURPOSE ! Checks if all filters set in the dataset creation ! property list are available ! ! INPUTS -! +! ! prp_id - data creation property list identifier ! OUTPUTS -! +! ! flag - .TRUE. if all filters are available ! .FALSE. otherwise -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -4330,13 +4330,13 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pall_filters_avail_f(prp_id, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property - ! list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property + ! list identifier LOGICAL, INTENT(OUT) :: flag ! .TRUE. if all filters are available ! .FALSE. otherwise INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTEGER :: status INTERFACE @@ -4349,24 +4349,24 @@ CONTAINS END FUNCTION h5pall_filters_avail_c END INTERFACE flag = .TRUE. - hdferr = h5pall_filters_avail_c(prp_id, status) + hdferr = h5pall_filters_avail_c(prp_id, status) IF (status .EQ. 0 ) flag = .FALSE. - + END SUBROUTINE h5pall_filters_avail_f !****s* H5P/h5pget_filter_by_id_f ! NAME -! h5pget_filter_by_id_f +! h5pget_filter_by_id_f ! ! PURPOSE ! Returns information about a filter in a pipeline ! ! INPUTS -! -! prp_id - data creation or transfer property list +! +! prp_id - data creation or transfer property list ! identifier ! OUTPUTS -! +! ! filter_id - filter identifier ! flags - bit vector specifying certain general ! properties of the filter @@ -4374,9 +4374,9 @@ CONTAINS ! cd_values - auxiliary data for the filter ! namelen - number of characters in the name buffer ! name - buffer to retrieve filter name -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -4385,7 +4385,7 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pget_filter_by_id_f(prp_id, filter_id, flags, cd_nelmts, cd_values, namelen, name, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: filter_id ! Filter identifier INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts ! Number of elements in cd_values. INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter. @@ -4404,29 +4404,29 @@ CONTAINS IMPORT :: HID_T, SIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter_id + INTEGER, INTENT(IN) :: filter_id INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values - INTEGER, INTENT(OUT) :: flags + INTEGER, INTENT(OUT) :: flags INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts INTEGER(SIZE_T), INTENT(IN) :: namelen CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name END FUNCTION h5pget_filter_by_id_c END INTERFACE - - hdferr = h5pget_filter_by_id_c(prp_id, filter_id, flags, cd_nelmts, & + + hdferr = h5pget_filter_by_id_c(prp_id, filter_id, flags, cd_nelmts, & cd_values, namelen, name) END SUBROUTINE h5pget_filter_by_id_f !****s* H5P/h5pmodify_filter_f ! NAME -! h5pmodify_filter_f +! h5pmodify_filter_f ! ! PURPOSE -! Adds a filter to the filter pipeline. +! Adds a filter to the filter pipeline. ! ! INPUTS -! -! prp_id - data creation or transfer property list +! +! prp_id - data creation or transfer property list ! identifier ! filter - filter to be modified ! flags - bit vector specifying certain general @@ -4434,9 +4434,9 @@ CONTAINS ! cd_nelmts - number of elements in cd_values ! cd_values - auxiliary data for the filter ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Elena Pourmal @@ -4445,7 +4445,7 @@ CONTAINS ! Fortran90 Interface: SUBROUTINE h5pmodify_filter_f(prp_id, filter, flags, cd_nelmts, cd_values, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier INTEGER, INTENT(IN) :: filter ! Filter to be modified INTEGER, INTENT(IN) :: flags ! Bit vector specifying certain general ! properties of the filter @@ -4459,33 +4459,33 @@ CONTAINS BIND(C,NAME='h5pmodify_filter_c') IMPORT :: HID_T, SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter - INTEGER, INTENT(IN) :: flags - INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts - INTEGER, DIMENSION(*), INTENT(IN) :: cd_values + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(IN) :: flags + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values END FUNCTION h5pmodify_filter_c END INTERFACE - + hdferr = h5pmodify_filter_c(prp_id, filter, flags, cd_nelmts, cd_values ) END SUBROUTINE h5pmodify_filter_f -!****s* H5P/h5premove_filter_f +!****s* H5P/h5premove_filter_f ! NAME -! h5premove_filter_f +! h5premove_filter_f ! ! PURPOSE -! Delete one or more filters from the filter pipeline. +! Delete one or more filters from the filter pipeline. ! ! INPUTS -! -! prp_id - data creation or transfer property list +! +! prp_id - data creation or transfer property list ! identifier ! filter - filter to be removed ! OUTPUTS -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! Quincey Koziol @@ -4505,39 +4505,39 @@ CONTAINS BIND(C,NAME='h5premove_filter_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter END FUNCTION h5premove_filter_c END INTERFACE - + hdferr = h5premove_filter_c(prp_id, filter) END SUBROUTINE h5premove_filter_f !****s* H5P/H5Pget_attr_phase_change_f ! NAME -! H5Pget_attr_phase_change_f +! H5Pget_attr_phase_change_f ! ! PURPOSE -! Retrieves attribute storage phase change thresholds +! Retrieves attribute storage phase change thresholds ! ! INPUTS -! +! ! ocpl_id - Object (dataset or group) creation property list identifier ! OUTPUTS -! +! ! max_compact - Maximum number of attributes to be stored in compact storage ! (Default: 8) ! min_dense - Minimum number of attributes to be stored in dense storage ! (Default: 6) -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! January, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pget_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier @@ -4563,28 +4563,28 @@ CONTAINS hdferr = h5pget_attr_phase_change_c(ocpl_id, max_compact, min_dense) END SUBROUTINE h5pget_attr_phase_change_f -!****s* H5P/H5Pset_attr_creation_order_f +!****s* H5P/H5Pset_attr_creation_order_f ! NAME -! H5Pset_attr_creation_order_f +! H5Pset_attr_creation_order_f ! ! PURPOSE ! Sets tracking and indexing of attribute creation order ! ! INPUTS -! +! ! ocpl_id - Object creation property list identifier ! crt_order_flags - Flags specifying whether to track and index attribute creation order ! OUTPUTS ! -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! January, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pset_attr_creation_order_f(ocpl_id, crt_order_flags , hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier @@ -4606,36 +4606,36 @@ CONTAINS hdferr = H5Pset_attr_creation_order_c(ocpl_id, crt_order_flags) END SUBROUTINE h5pset_attr_creation_order_f -!****s* H5P/H5Pset_shared_mesg_nindexes_f +!****s* H5P/H5Pset_shared_mesg_nindexes_f ! NAME -! H5Pset_shared_mesg_nindexes_f +! H5Pset_shared_mesg_nindexes_f ! ! PURPOSE -! Sets number of shared object header message indexes +! Sets number of shared object header message indexes ! ! INPUTS -! +! ! plist_id - file creation property list ! nindexes - Number of shared object header message indexes to be available in files created with this property list ! OUTPUTS ! -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! January, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pset_shared_mesg_nindexes_f( plist_id, nindexes, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list - INTEGER, INTENT(IN) :: nindexes ! Number of shared object header message indexes + INTEGER, INTENT(IN) :: nindexes ! Number of shared object header message indexes ! available in files created WITH this property list INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** ! ! MS FORTRAN needs explicit interface for C functions called here. ! @@ -4662,7 +4662,7 @@ CONTAINS ! Configures the specified shared object header message index ! ! INPUTS -! +! ! fcpl_id - File creation property list identifier. ! index_num - Index being configured. ! mesg_type_flags - Types of messages that should be stored in this index. @@ -4670,15 +4670,15 @@ CONTAINS ! ! OUTPUTS ! -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! January, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pset_shared_mesg_index_f(fcpl_id, index_num, mesg_type_flags, min_mesg_size, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fcpl_id ! file creation property list @@ -4687,7 +4687,7 @@ CONTAINS INTEGER, INTENT(IN) :: min_mesg_size ! Minimum message size. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** ! ! MS FORTRAN needs explicit interface for C functions called here. ! @@ -4696,7 +4696,7 @@ CONTAINS BIND(C,NAME='h5pset_shared_mesg_index_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fcpl_id + INTEGER(HID_T), INTENT(IN) :: fcpl_id INTEGER, INTENT(IN) :: index_num INTEGER, INTENT(IN) :: mesg_type_flags INTEGER, INTENT(IN) :: min_mesg_size @@ -4721,22 +4721,22 @@ CONTAINS ! OUTPUTS ! ! crt_order_flags - Flags specifying whether to track and index attribute creation order -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! February, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pget_attr_creation_order_f(ocpl_id, crt_order_flags, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (group or dataset) creation property list identifier - INTEGER, INTENT(OUT) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (group or dataset) creation property list identifier + INTEGER, INTENT(OUT) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** ! ! MS FORTRAN needs explicit interface for C functions called here. ! @@ -4759,7 +4759,7 @@ CONTAINS ! H5Pget_libver_bounds_f ! ! PURPOSE -! Retrieves the lower and upper bounds on the HDF5 library release versions that indirectly +! Retrieves the lower and upper bounds on the HDF5 library release versions that indirectly ! determine the object format versions used when creating objects in the file. ! ! INPUTS @@ -4828,15 +4828,15 @@ CONTAINS ! ! OUTPUTS ! -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! February 18, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pset_libver_bounds_f(fapl_id, low, high, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier @@ -4867,9 +4867,9 @@ CONTAINS END SUBROUTINE h5pset_libver_bounds_f -!****s* H5P/H5Pset_link_creation_order_f +!****s* H5P/H5Pset_link_creation_order_f ! NAME -! H5Pset_link_creation_order_f +! H5Pset_link_creation_order_f ! ! PURPOSE ! Sets creation order tracking and indexing for links in a group. @@ -4881,15 +4881,15 @@ CONTAINS ! ! OUTPUTS ! -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! February 18, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pset_link_creation_order_f(gcpl_id, crt_order_flags, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: gcpl_id ! File access property list identifier @@ -4920,21 +4920,21 @@ CONTAINS ! Queries the settings for conversion between compact and dense groups. ! ! INPUTS -! +! ! gcpl_id - Group creation property list identifier ! OUTPUTS -! +! ! max_compact - Maximum number of attributes to be stored in compact storage ! min_dense - Minimum number of attributes to be stored in dense storage -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! February 20, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pget_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier @@ -4958,37 +4958,37 @@ CONTAINS hdferr = h5pget_link_phase_change_c(gcpl_id, max_compact, min_dense) END SUBROUTINE h5pget_link_phase_change_f -!****s* H5P/H5Pget_obj_track_times_f +!****s* H5P/H5Pget_obj_track_times_f ! NAME -! H5Pget_obj_track_times_f +! H5Pget_obj_track_times_f ! ! PURPOSE ! Returns whether times are tracked for an object. ! ! INPUTS -! +! ! plist_id - property list id ! flag - object timestamp setting ! .TRUE.,.FALSE. ! OUTPUTS ! -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! February 22, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pget_obj_track_times_f(plist_id, flag, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property - ! list identifier + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property + ! list identifier LOGICAL, INTENT(OUT) :: flag ! Object timestamp setting INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTEGER :: status ! ! MS FORTRAN needs explicit interface for C functions called here. @@ -4997,7 +4997,7 @@ CONTAINS INTEGER FUNCTION h5pget_obj_track_times_c(plist_id, status) & BIND(C,NAME='h5pget_obj_track_times_c') IMPORT :: HID_T - INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier + INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier INTEGER, INTENT(OUT) :: status END FUNCTION h5pget_obj_track_times_c END INTERFACE @@ -5007,9 +5007,9 @@ CONTAINS END SUBROUTINE h5pget_obj_track_times_f -!****s* H5P/H5Pset_obj_track_times_f +!****s* H5P/H5Pset_obj_track_times_f ! NAME -! H5Pset_obj_track_times_f +! H5Pset_obj_track_times_f ! ! PURPOSE ! Set whether the birth, access, modification & change times for @@ -5029,22 +5029,22 @@ CONTAINS ! epoch) when queried. ! ! INPUTS -! +! ! plist_id - property list id ! flag - object timestamp setting ! .TRUE.,.FALSE. ! OUTPUTS ! -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! February 22, 2008 -! -! -! Fortran90 Interface: +! +! +! Fortran90 Interface: SUBROUTINE h5pset_obj_track_times_f(plist_id, flag, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property @@ -5052,7 +5052,7 @@ CONTAINS LOGICAL, INTENT(IN) :: flag ! Object timestamp setting INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTEGER :: status ! ! MS FORTRAN needs explicit interface for C functions called here. @@ -5062,7 +5062,7 @@ CONTAINS BIND(C,NAME='h5pset_obj_track_times_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier + INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier INTEGER, INTENT(IN) :: status END FUNCTION h5pset_obj_track_times_c END INTERFACE @@ -5082,22 +5082,22 @@ CONTAINS ! Specifies in property list whether to create missing intermediate groups. ! ! INPUTS -! +! ! lcpl_id - Link creation property list identifier -! crt_intermed_group - crt_intermed_group specifying whether -! to create intermediate groups upon the creation +! crt_intermed_group - crt_intermed_group specifying whether +! to create intermediate groups upon the creation ! of an object ! OUTPUTS ! -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! February 22, 2008 ! -! HISTORY +! HISTORY ! The long subroutine name (>31) on older f90 compilers causes problems ! so had to shorten the name ! Fortran90 Interface: @@ -5137,15 +5137,15 @@ CONTAINS ! OUTPUTS ! ! crt_order_flags - Creation order flag(s) -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! March 3, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pget_link_creation_order_f(gcpl_id, crt_order_flags, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier @@ -5183,15 +5183,15 @@ CONTAINS ! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding ! ! OUTPUTS -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! March 3, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pset_char_encoding_f(plist_id, encoding, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier @@ -5232,15 +5232,15 @@ CONTAINS ! encoding - Valid values for encoding are: ! H5T_CSET_ASCII_F -> US ASCII ! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! March 3, 2008 ! -! Fortran90 Interface: +! Fortran90 Interface: SUBROUTINE h5pget_char_encoding_f(plist_id, encoding, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier @@ -5268,20 +5268,20 @@ CONTAINS !****s* H5P/h5pset_copy_object_f ! NAME -! h5pset_copy_object_f +! h5pset_copy_object_f ! ! PURPOSE ! Sets properties to be used when an object is copied. ! ! INPUTS -! +! ! ocp_plist_id - Object copy property list identifier ! copy_options - Copy option(s) to be set ! OUTPUTS -! -! hdferr - error code +! +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld @@ -5289,8 +5289,8 @@ CONTAINS ! ! HISTORY ! -! -! Fortran90 Interface: +! +! Fortran90 Interface: SUBROUTINE h5pset_copy_object_f(ocp_plist_id, copy_options, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier @@ -5317,20 +5317,20 @@ CONTAINS !****s* H5P/h5pget_copy_object_f ! NAME -! h5pget_copy_object_f +! h5pget_copy_object_f ! ! PURPOSE ! Retrieves the properties to be used when an object is copied. ! ! INPUTS -! +! ! ocp_plist_id - Object copy property list identifier ! OUTPUTS -! +! ! copy_options - Copy option(s) to be get -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld @@ -5338,14 +5338,14 @@ CONTAINS ! ! HISTORY ! -! +! ! Fortran90 Interface: SUBROUTINE h5pget_copy_object_f(ocp_plist_id, copy_options, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier INTEGER, INTENT(OUT) :: copy_options ! Valid copy options returned are: ! H5O_COPY_SHALLOW_HIERARCHY_F - ! H5O_COPY_EXPAND_SOFT_LINK_F + ! H5O_COPY_EXPAND_SOFT_LINK_F ! H5O_COPY_EXPAND_EXT_LINK_F ! H5O_COPY_EXPAND_REFERENCE_F ! H5O_COPY_WITHOUT_ATTR_FLAG_F @@ -5364,23 +5364,23 @@ CONTAINS hdferr = h5pget_copy_object_c(ocp_plist_id, copy_options) END SUBROUTINE h5pget_copy_object_f -!****s* H5P/h5pget_data_transform_f +!****s* H5P/h5pget_data_transform_f ! NAME -! h5pget_data_transform_f +! h5pget_data_transform_f ! ! PURPOSE ! Retrieves a data transform expression. ! ! INPUTS -! +! ! plist_id - Identifier of the property list or class ! OUTPUTS -! +! ! expression - buffer to hold transform expression ! hdferr - Error code ! Success: Actual length of the expression -! If provided buffer "expression" is -! smaller, than expression will be +! If provided buffer "expression" is +! smaller, than expression will be ! truncated to fit into ! provided user buffer ! Failure: -1 @@ -5400,7 +5400,7 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: size ! Registered size of the transform expression INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTEGER :: expression_len INTEGER(SIZE_T) :: size_default @@ -5410,8 +5410,8 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) IMPORT :: C_CHAR IMPORT :: HID_T, SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: expression + INTEGER(HID_T), INTENT(IN) :: plist_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: expression INTEGER(SIZE_T) :: size_default INTEGER :: expression_len END FUNCTION h5pget_data_transform_c @@ -5426,19 +5426,19 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) END SUBROUTINE h5pget_data_transform_f -!****s* H5P/h5pset_data_transform_f +!****s* H5P/h5pset_data_transform_f ! NAME -! h5pset_data_transform_f +! h5pset_data_transform_f ! ! PURPOSE ! Sets a data transform expression. ! ! INPUTS -! -! plist_id - Identifier of the property list or class +! +! plist_id - Identifier of the property list or class ! expression - Buffer to hold transform expression ! OUTPUTS -! +! ! hdferr - error code ! Success: 0 ! Failure: -1 @@ -5454,7 +5454,7 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) CHARACTER(LEN=*), INTENT(IN) :: expression ! Buffer to hold transform expression INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTEGER :: expression_len INTERFACE @@ -5463,7 +5463,7 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) IMPORT :: C_CHAR IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HID_T), INTENT(IN) :: plist_id CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: expression INTEGER :: expression_len END FUNCTION h5pset_data_transform_c @@ -5474,15 +5474,15 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) END SUBROUTINE h5pset_data_transform_f -!****s* H5P/H5Pget_local_heap_size_hint_f +!****s* H5P/H5Pget_local_heap_size_hint_f ! NAME -! H5Pget_local_heap_size_hint_f +! H5Pget_local_heap_size_hint_f ! ! PURPOSE ! Queries the local heap size hint for original-style groups. ! ! INPUTS -! +! ! gcpl_id - Group creation property list identifier ! OUTPUTS ! @@ -5517,18 +5517,18 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) END SUBROUTINE h5pget_local_heap_size_hint_f -!****s* H5P/H5Pget_est_link_info_f +!****s* H5P/H5Pget_est_link_info_f ! NAME -! H5Pget_est_link_info_f +! H5Pget_est_link_info_f ! ! PURPOSE ! Queries data required to estimate required local heap or object header size. ! ! INPUTS -! +! ! gcpl_id - Group creation property list identifier ! OUTPUTS -! +! ! est_num_entries - Estimated number of links to be inserted into group ! est_name_len - Estimated average length of link names ! hdferr - Error code @@ -5541,11 +5541,11 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) ! ! HISTORY ! -! +! ! Fortran90 Interface: SUBROUTINE h5pget_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier INTEGER, INTENT(OUT) :: est_num_entries ! Estimated number of links to be inserted into group INTEGER, INTENT(OUT) :: est_name_len ! Estimated average length of link names INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -5556,7 +5556,7 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) BIND(C,NAME='h5pget_est_link_info_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER(HID_T), INTENT(IN) :: gcpl_id INTEGER, INTENT(OUT) :: est_num_entries INTEGER, INTENT(OUT) :: est_name_len END FUNCTION h5pget_est_link_info_c @@ -5566,15 +5566,15 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) END SUBROUTINE h5pget_est_link_info_f -!****s* H5P/H5Pset_local_heap_size_hint_f +!****s* H5P/H5Pset_local_heap_size_hint_f ! NAME -! H5Pset_local_heap_size_hint_f +! H5Pset_local_heap_size_hint_f ! ! PURPOSE ! Sets the local heap size hint for original-style groups. ! ! INPUTS -! +! ! gcpl_id - Group creation property list identifier ! size_hint - Hint for size of local heap ! OUTPUTS @@ -5598,7 +5598,7 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) INTERFACE INTEGER FUNCTION h5pset_local_heap_size_hint_c(gcpl_id, size_hint) & BIND(C,NAME='h5pset_local_heap_size_hint_c') - IMPORT :: HID_T, SIZE_T + IMPORT :: HID_T, SIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: gcpl_id INTEGER(SIZE_T), INTENT(IN) :: size_hint @@ -5609,16 +5609,16 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) END SUBROUTINE h5pset_local_heap_size_hint_f -!****s* H5P/h5pset_est_link_info_f +!****s* H5P/h5pset_est_link_info_f ! NAME -! h5pset_est_link_info_f +! h5pset_est_link_info_f ! ! PURPOSE ! Sets estimated number of links and length of link names in a group. ! ! INPUTS -! -! gcpl_id - Group creation property list identifier +! +! gcpl_id - Group creation property list identifier ! est_num_entries - Estimated number of links to be inserted into group ! est_name_len - Estimated average length of link names ! OUTPUTS @@ -5634,7 +5634,7 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) ! Fortran90 Interface: SUBROUTINE h5pset_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier INTEGER, INTENT(IN) :: est_num_entries ! Estimated number of links to be inserted into group INTEGER, INTENT(IN) :: est_name_len ! Estimated average length of link names INTEGER, INTENT(OUT) :: hdferr ! Error code @@ -5645,7 +5645,7 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) BIND(C,NAME='h5pset_est_link_info_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER(HID_T), INTENT(IN) :: gcpl_id INTEGER, INTENT(IN) :: est_num_entries INTEGER, INTENT(IN) :: est_name_len END FUNCTION h5pset_est_link_info_c @@ -5663,15 +5663,15 @@ SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) ! Sets the parameters for conversion between compact and dense groups. ! ! INPUTS -! -! gcpl_id - Group creation property list identifier +! +! gcpl_id - Group creation property list identifier ! max_compact - Maximum number of attributes to be stored in compact storage ! min_dense - Minimum number of attributes to be stored in dense storage ! OUTPUTS ! -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld @@ -5708,16 +5708,16 @@ SUBROUTINE h5pset_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) ! Sets up use of the direct I/O driver. ! ! INPUTS -! +! ! fapl_id - File access property list identifier ! alignment - Required memory alignment boundary ! block_size - File system block size ! cbuf_size - Copy buffer size ! OUTPUTS ! -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld @@ -5725,7 +5725,7 @@ SUBROUTINE h5pset_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) ! ! Fortran90 Interface: SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr) - IMPLICIT NONE + IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier INTEGER(SIZE_T), INTENT(IN) :: alignment ! Required memory alignment boundary! INTEGER(SIZE_T), INTENT(IN) :: block_size ! File system block size @@ -5738,7 +5738,7 @@ SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdfer BIND(C,NAME='h5pset_fapl_direct_c') IMPORT :: HID_T, SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER(HID_T), INTENT(IN) :: fapl_id INTEGER(SIZE_T), INTENT(IN) :: alignment INTEGER(SIZE_T), INTENT(IN) :: block_size INTEGER(SIZE_T), INTENT(IN) :: cbuf_size @@ -5756,16 +5756,16 @@ SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdfer ! Gets up use of the direct I/O driver. ! ! INPUTS -! +! ! fapl_id - File access property list identifier ! OUTPUTS ! ! alignment - Required memory alignment boundary ! block_size - File system block size ! cbuf_size - Copy buffer size -! hdferr - error code +! hdferr - error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld @@ -5773,7 +5773,7 @@ SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdfer ! ! Fortran90 Interface: SUBROUTINE h5pget_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr) - IMPLICIT NONE + IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier INTEGER(SIZE_T), INTENT(OUT) :: alignment ! Required memory alignment boundary! INTEGER(SIZE_T), INTENT(OUT) :: block_size ! File system block size @@ -5786,7 +5786,7 @@ SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdfer BIND(C,NAME='h5pget_fapl_direct_c') IMPORT :: HID_T, SIZE_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER(HID_T), INTENT(IN) :: fapl_id INTEGER(SIZE_T), INTENT(OUT) :: alignment INTEGER(SIZE_T), INTENT(OUT) :: block_size INTEGER(SIZE_T), INTENT(OUT) :: cbuf_size @@ -5798,23 +5798,23 @@ SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdfer !****s* H5P/H5Pset_attr_phase_change_f ! NAME -! H5Pset_attr_phase_change_f +! H5Pset_attr_phase_change_f ! ! PURPOSE ! Sets attribute storage phase change thresholds. ! ! INPUTS -! +! ! ocpl_id - Object (dataset or group) creation property list identifier ! OUTPUTS -! +! ! max_compact - Maximum number of attributes to be stored in compact storage ! (Default: 8) ! min_dense - Minimum number of attributes to be stored in dense storage ! (Default: 6) -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld @@ -5850,7 +5850,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) !****s* H5P/H5Pset_nbit_f ! NAME -! H5Pset_nbit_f +! H5Pset_nbit_f ! ! PURPOSE ! Sets up the use of the N-Bit filter. @@ -5886,7 +5886,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) !****s* H5P/h5pset_scaleoffset_f ! NAME -! h5pset_scaleoffset_f +! h5pset_scaleoffset_f ! ! PURPOSE ! Sets up the use of the scale-offset filter. @@ -5914,7 +5914,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) INTEGER , INTENT(IN) :: scale_type INTEGER , INTENT(IN) :: scale_factor INTEGER , INTENT(OUT) :: hdferr -!***** +!***** INTERFACE INTEGER FUNCTION h5pset_scaleoffset_c(plist_id, scale_type, scale_factor) & @@ -5931,15 +5931,15 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) END SUBROUTINE h5pset_scaleoffset_f -!****s* H5P/h5pset_nlinks_f +!****s* H5P/h5pset_nlinks_f ! NAME -! h5pset_nlinks_f +! h5pset_nlinks_f ! ! PURPOSE ! Sets maximum number of soft or user-defined link traversals. ! ! INPUTS -! +! ! lapl_id - File access property list identifier ! nlinks - Maximum number of links to traverse ! @@ -5955,15 +5955,15 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! ! HISTORY ! -! +! ! Fortran90 Interface: SUBROUTINE h5pset_nlinks_f(lapl_id, nlinks, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: lapl_id ! File access property list identifier INTEGER(SIZE_T), INTENT(IN) :: nlinks ! Maximum number of links to traverse - INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTERFACE INTEGER FUNCTION h5pset_nlinks_c(lapl_id, nlinks) & BIND(C,NAME='h5pset_nlinks_c') @@ -5978,15 +5978,15 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) END SUBROUTINE h5pset_nlinks_f -!****s* H5P/h5pget_nlinks_f +!****s* H5P/h5pget_nlinks_f ! NAME -! h5pget_nlinks_f +! h5pget_nlinks_f ! ! PURPOSE ! Gets maximum number of soft or user-defined link traversals. ! ! INPUTS -! +! ! lapl_id - File access property list identifier ! nlinks - Maximum number of links to traverse ! @@ -6011,7 +6011,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) INTERFACE INTEGER FUNCTION h5pget_nlinks_c(lapl_id, nlinks) & BIND(C,NAME='h5pget_nlinks_c') - IMPORT :: HID_T, SIZE_T + IMPORT :: HID_T, SIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: lapl_id INTEGER(SIZE_T), INTENT(OUT) :: nlinks @@ -6030,22 +6030,22 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! Determines whether property is set to enable creating missing intermediate groups. ! ! INPUTS -! +! ! lcpl_id - Link creation property list identifier -! crt_intermed_group - Specifying whether to create intermediate groups upon +! crt_intermed_group - Specifying whether to create intermediate groups upon ! the creation of an object ! OUTPUTS ! -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld ! April 4, 2008 ! ! HISTORY -! +! ! The long subroutine name (>31) on older f90 compilers causes problems ! so the name was shortened ! Fortran90 Interface: @@ -6056,7 +6056,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! upon creation of an object INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTERFACE INTEGER FUNCTION h5pget_create_inter_group_c(lcpl_id, crt_intermed_group) & BIND(C,NAME='h5pget_create_inter_group_c') @@ -6095,16 +6095,16 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! other chunks. ! ! INPUTS -! +! ! dapl_id - Dataset access property list identifier. ! rdcc_nslots - The number of chunk slots in the raw data chunk cache for this dataset. ! rdcc_nbytes - The total size of the raw data chunk cache for this dataset. ! rdcc_w0 - The chunk preemption policy for this dataset. ! OUTPUTS ! -! hdferr - Error code +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld @@ -6116,19 +6116,19 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) SUBROUTINE h5pset_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: dapl_id ! Dataset access property list identifier. - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots ! The number of chunk slots in the raw data + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots ! The number of chunk slots in the raw data ! chunk cache for this dataset. - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! The total size of the raw data chunk cache + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! The total size of the raw data chunk cache ! for this dataset. REAL, INTENT(IN) :: rdcc_w0 ! The chunk preemption policy for this dataset. INTEGER, INTENT(OUT) :: hdferr ! Error code ! 0 on success and -1 on failure -!***** +!***** INTERFACE INTEGER FUNCTION h5pset_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) & BIND(C,NAME='h5pset_chunk_cache_c') - IMPORT :: HID_T, SIZE_T + IMPORT :: HID_T, SIZE_T IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: dapl_id INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots @@ -6155,16 +6155,16 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! file access property list are returned. ! ! INPUTS -! +! ! dapl_id - Dataset access property list identifier. ! OUTPUTS -! -! rdcc_nslots - Number of chunk slots in the raw data chunk cache hash table. -! rdcc_nbytes - Total size of the raw data chunk cache, in bytes. -! rdcc_w0 - Preemption policy. -! hdferr - Error code +! +! rdcc_nslots - Number of chunk slots in the raw data chunk cache hash table. +! rdcc_nbytes - Total size of the raw data chunk cache, in bytes. +! rdcc_w0 - Preemption policy. +! hdferr - Error code ! Success: 0 -! Failure: -1 +! Failure: -1 ! ! AUTHOR ! M. Scot Breitenfeld @@ -6177,11 +6177,11 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: dapl_id ! Dataset access property list identifier. INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nslots ! Number of chunk slots in the raw data chunk cache hash table. - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data chunk cache, in bytes. + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data chunk cache, in bytes. REAL, INTENT(OUT) :: rdcc_w0 ! Preemption policy. INTEGER, INTENT(OUT) :: hdferr ! Error code: ! 0 on success and -1 on failure -!***** +!***** INTERFACE INTEGER FUNCTION h5pget_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) & BIND(C,NAME='h5pget_chunk_cache_c') @@ -6234,7 +6234,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. ! ! Fortran90 Interface: -!! SUBROUTINE h5pset_fill_value_f(prp_id, type_id, fillvalue, hdferr) +!! SUBROUTINE h5pset_fill_value_f(prp_id, type_id, fillvalue, hdferr) !! IMPLICIT NONE !! INTEGER(HID_T), INTENT(IN) :: prp_id !! INTEGER(HID_T), INTENT(IN) :: type_id @@ -6295,7 +6295,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! ! Fortran90 Interface: !! SUBROUTINE h5pget_fill_value_f(prp_id, type_id, fillvalue, hdferr) -!! INTEGER(HID_T), INTENT(IN) :: prp_id +!! INTEGER(HID_T), INTENT(IN) :: prp_id !! INTEGER(HID_T), INTENT(IN) :: type_id !! TYPE(VOID) , INTENT(OUT) :: fillvalue !! INTEGER , INTENT(OUT) :: hdferr @@ -6402,7 +6402,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! ! Fortran2003 Interface: !! SUBROUTINE h5pset_fill_value_f(prp_id, type_id, fillvalue, hdferr) -!! INTEGER(HID_T), INTENT(IN) :: prp_id +!! INTEGER(HID_T), INTENT(IN) :: prp_id !! INTEGER(HID_T), INTENT(IN) :: type_id !! TYPE(C_PTR) , INTENT(IN) :: fillvalue !! INTEGER , INTENT(OUT) :: hdferr @@ -6458,7 +6458,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! ! Fortran2003 Interface: !! SUBROUTINE h5pget_fill_value_f(prp_id, type_id, fillvalue, hdferr) -!! INTEGER(HID_T), INTENT(IN) :: prp_id +!! INTEGER(HID_T), INTENT(IN) :: prp_id !! INTEGER(HID_T), INTENT(IN) :: type_id !! TYPE(C_PTR) :: fillvalue !! INTEGER , INTENT(OUT) :: hdferr @@ -6750,7 +6750,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) !! CHARACTER(LEN=*), INTENT(IN) :: name !! INTEGER(SIZE_T) , INTENT(IN) :: size !! TYPE , INTENT(IN) :: value -!! INTEGER , INTENT(OUT) :: hdferr +!! INTEGER , INTENT(OUT) :: hdferr !***** SUBROUTINE h5pregister_integer(class, name, size, value, hdferr) IMPLICIT NONE @@ -6832,7 +6832,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) !! CHARACTER(LEN=*), INTENT(IN) :: name !! INTEGER(SIZE_T) , INTENT(IN) :: size !! TYPE(C_PTR) , INTENT(IN) :: value -!! INTEGER , INTENT(OUT) :: hdferr +!! INTEGER , INTENT(OUT) :: hdferr !***** SUBROUTINE h5pregister_ptr(class, name, size, value, hdferr) @@ -6951,7 +6951,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! Outputs: ! hdferr - Returns 0 if successful and -1 if fails ! -! AUTHOR +! AUTHOR ! M. Scot Breitenfeld ! June 24, 2008 ! @@ -7077,7 +7077,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! ! Inputs: ! fapl_id - File access property list identifier -! buf_ptr - Pointer to the initial file image, +! buf_ptr - Pointer to the initial file image, ! or C_NULL_PTR if no initial file image is desired ! buf_len - Size of the supplied buffer, or 0 (zero) if no initial image is desired ! @@ -7117,7 +7117,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! h5pget_file_image_f ! ! PURPOSE -! Retrieves a copy of the file image designated as the initial content and structure of a file. +! Retrieves a copy of the file image designated as the initial content and structure of a file. ! ! Inputs: ! fapl_id - File access property list identifier. @@ -7149,7 +7149,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) TYPE(C_PTR) , INTENT(OUT), DIMENSION(*) :: buf_ptr INTEGER(SIZE_T), INTENT(OUT) :: buf_len_ptr INTEGER , INTENT(OUT) :: hdferr - + !***** INTERFACE INTEGER FUNCTION h5pget_file_image_c(fapl_id, buf_ptr, buf_len_ptr) & @@ -7205,7 +7205,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) BIND(C,NAME='h5pset_fapl_mpio_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER , INTENT(IN) :: comm INTEGER , INTENT(IN) :: info END FUNCTION h5pset_fapl_mpio_c @@ -7248,7 +7248,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) BIND(C,NAME='h5pget_fapl_mpio_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER , INTENT(OUT) :: comm INTEGER , INTENT(OUT) :: info END FUNCTION h5pget_fapl_mpio_c @@ -7291,7 +7291,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) BIND(C,NAME='h5pset_dxpl_mpio_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER , INTENT(IN) :: data_xfer_mode END FUNCTION h5pset_dxpl_mpio_c END INTERFACE @@ -7333,7 +7333,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) BIND(C,NAME='h5pget_dxpl_mpio_c') IMPORT :: HID_T IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: prp_id INTEGER , INTENT(OUT) :: data_xfer_mode END FUNCTION h5pget_dxpl_mpio_c END INTERFACE @@ -7346,8 +7346,8 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! h5pget_mpio_actual_io_mode_f ! ! PURPOSE -! Retrieves the type of I/O that HDF5 actually performed on the last -! parallel I/O call. This is not necessarily the type of I/O requested. +! Retrieves the type of I/O that HDF5 actually performed on the last +! parallel I/O call. This is not necessarily the type of I/O requested. ! ! INPUTS ! dxpl_id - Dataset transfer property list identifier. @@ -7367,7 +7367,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) INTEGER(HID_T), INTENT(IN) :: dxpl_id INTEGER , INTENT(OUT) :: actual_io_mode INTEGER , INTENT(OUT) :: hdferr -!***** +!***** INTERFACE INTEGER FUNCTION h5pget_mpio_actual_io_mode_c(dxpl_id, actual_io_mode) & BIND(C,NAME='h5pget_mpio_actual_io_mode_c') @@ -7389,9 +7389,9 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! h5pset_all_coll_metadata_ops_f ! ! PURPOSE -! Sets requirement whether HDF5 metadata read operations using the access property -! list are required to be collective or independent. If collective requirement is -! selected, the HDF5 library will optimize the metadata reads improving performance. +! Sets requirement whether HDF5 metadata read operations using the access property +! list are required to be collective or independent. If collective requirement is +! selected, the HDF5 library will optimize the metadata reads improving performance. ! The default setting is independent (false). ! ! INPUTS @@ -7414,7 +7414,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) INTEGER, INTENT(OUT) :: hdferr !***** LOGICAL(C_BOOL) :: c_is_collective - + INTERFACE INTEGER FUNCTION h5pset_all_coll_metadata_ops(plist_id, is_collective) BIND(C, NAME='H5Pset_all_coll_metadata_ops') IMPORT :: HID_T, C_BOOL @@ -7426,12 +7426,12 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! Transfer value of Fortran LOGICAL to C c_bool type c_is_collective = is_collective - + hdferr = INT(H5Pset_all_coll_metadata_ops(plist_id, c_is_collective)) - + END SUBROUTINE h5pset_all_coll_metadata_ops_f -!****s* H5P/h5pget_all_coll_metadata_ops_f +!****s* H5P/h5pget_all_coll_metadata_ops_f ! NAME ! h5pget_all_coll_metadata_ops_f ! @@ -7452,14 +7452,14 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! ! SOURCE SUBROUTINE h5pget_all_coll_metadata_ops_f(plist_id, is_collective, hdferr) - + IMPLICIT NONE INTEGER(HID_T) , INTENT(IN) :: plist_id LOGICAL, INTENT(OUT) :: is_collective INTEGER, INTENT(OUT) :: hdferr !***** LOGICAL(C_BOOL) :: c_is_collective - + INTERFACE INTEGER FUNCTION h5pget_all_coll_metadata_ops(plist_id, is_collective) BIND(C, NAME='H5Pget_all_coll_metadata_ops') IMPORT :: HID_T, C_BOOL @@ -7468,12 +7468,12 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) LOGICAL(C_BOOL), INTENT(OUT) :: is_collective END FUNCTION h5pget_all_coll_metadata_ops END INTERFACE - + hdferr = INT(H5Pget_all_coll_metadata_ops(plist_id, c_is_collective)) - - ! Transfer value of C c_bool type to Fortran LOGICAL + + ! Transfer value of C c_bool type to Fortran LOGICAL is_collective = c_is_collective - + END SUBROUTINE h5pget_all_coll_metadata_ops_f !****s* H5P/h5pset_coll_metadata_write_f @@ -7503,7 +7503,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) INTEGER, INTENT(OUT) :: hdferr !***** LOGICAL(C_BOOL) :: c_is_collective - + INTERFACE INTEGER FUNCTION h5pset_coll_metadata_write(plist_id, is_collective) BIND(C, NAME='H5Pset_coll_metadata_write') IMPORT :: HID_T, C_BOOL @@ -7512,12 +7512,12 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) LOGICAL(C_BOOL), INTENT(IN), VALUE :: is_collective END FUNCTION h5pset_coll_metadata_write END INTERFACE - + ! Transfer value of Fortran LOGICAL to C c_bool type c_is_collective = is_collective - + hdferr = INT(H5Pset_coll_metadata_write(plist_id, c_is_collective)) - + END SUBROUTINE h5pset_coll_metadata_write_f !****s* H5P/h5pget_coll_metadata_write_f @@ -7541,14 +7541,14 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! ! SOURCE SUBROUTINE h5pget_coll_metadata_write_f(plist_id, is_collective, hdferr) - + IMPLICIT NONE INTEGER(HID_T) , INTENT(IN) :: plist_id LOGICAL, INTENT(OUT) :: is_collective INTEGER, INTENT(OUT) :: hdferr !***** LOGICAL(C_BOOL) :: c_is_collective - + INTERFACE INTEGER FUNCTION h5pget_coll_metadata_write(plist_id, is_collective) BIND(C, NAME='H5Pget_coll_metadata_write') IMPORT :: HID_T, C_BOOL @@ -7557,14 +7557,14 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) LOGICAL(C_BOOL), INTENT(OUT) :: is_collective END FUNCTION h5pget_coll_metadata_write END INTERFACE - + hdferr = INT(H5Pget_coll_metadata_write(plist_id, c_is_collective)) - - ! Transfer value of C c_bool type to Fortran LOGICAL + + ! Transfer value of C c_bool type to Fortran LOGICAL is_collective = c_is_collective - + END SUBROUTINE h5pget_coll_metadata_write_f - + #endif ! @@ -7584,9 +7584,9 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! Valid values are: ! H5D_VDS_FIRST_MISSING_F ! H5D_VDS_LAST_AVAILABLE_F -! +! ! OUTPUTS -! +! ! hdferr - Returns 0 if successful and -1 if fails. ! ! AUTHOR @@ -7601,7 +7601,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) INTEGER(HID_T), INTENT(IN) :: dapl_id INTEGER , INTENT(IN) :: view INTEGER , INTENT(OUT) :: hdferr - + !***** INTERFACE INTEGER FUNCTION h5pset_virtual_view(dapl_id, view) BIND(C,NAME='H5Pset_virtual_view') @@ -7613,7 +7613,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) END INTERFACE hdferr = INT( h5pset_virtual_view(dapl_id, INT(view,ENUM_T)) ) - + END SUBROUTINE h5pset_virtual_view_f !****s* H5P/h5pget_virtual_view_f @@ -7621,7 +7621,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! h5pget_virtual_view_f ! ! PURPOSE -! Retrieves the view of a virtual dataset accessed with dapl_id. +! Retrieves the view of a virtual dataset accessed with dapl_id. ! ! INPUTS ! dapl_id - Dataset access property list identifier for the virtual dataset @@ -7657,7 +7657,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) hdferr = INT( h5pget_virtual_view(dapl_id, view_enum) ) view = INT(view_enum) - + END SUBROUTINE h5pget_virtual_view_f !****s* H5P/h5pset_virtual_printf_gap_f @@ -7665,15 +7665,15 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! h5pset_virtual_printf_gap_f ! ! PURPOSE -! Sets the maximum number of missing source files and/or datasets with the printf-style names -! when getting the extent of an unlimited virtual dataset. +! Sets the maximum number of missing source files and/or datasets with the printf-style names +! when getting the extent of an unlimited virtual dataset. ! ! INPUTS ! dapl_id - Dataset access property list identifier for the virtual dataset. -! gap_size - Maximum number of files and/or datasets allowed to be missing for determining +! gap_size - Maximum number of files and/or datasets allowed to be missing for determining ! the extent of an unlimited virtual dataset with printf-style mappings. ! -! OUTPUTS +! OUTPUTS ! hdferr - Returns 0 if successful and -1 if fails. ! ! AUTHOR @@ -7682,7 +7682,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! ! HISTORY ! -! SOURCE +! SOURCE SUBROUTINE h5pset_virtual_printf_gap_f(dapl_id, gap_size, hdferr) IMPLICIT NONE INTEGER(HID_T) , INTENT(IN) :: dapl_id @@ -7699,7 +7699,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) END INTERFACE hdferr = INT( h5pset_virtual_printf_gap(dapl_id, gap_size) ) - + END SUBROUTINE h5pset_virtual_printf_gap_f !****s* H5P/h5pget_virtual_printf_gap_f @@ -7707,15 +7707,15 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! h5pget_virtual_printf_gap_f ! ! PURPOSE -! Returns the maximum number of missing source files and/or datasets with the +! Returns the maximum number of missing source files and/or datasets with the ! printf-style names when getting the extent for an unlimited virtual dataset. ! ! INPUTS ! dapl_id - Dataset access property list identifier for the virtual dataset ! ! OUTPUTS -! gap_size - Maximum number of the files and/or datasets allowed to be missing for -! determining the extent of an unlimited virtual dataset with printf-style mappings. +! gap_size - Maximum number of the files and/or datasets allowed to be missing for +! determining the extent of an unlimited virtual dataset with printf-style mappings. ! hdferr - Returns 0 if successful and -1 if fails ! ! AUTHOR @@ -7727,7 +7727,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! SOURCE SUBROUTINE h5pget_virtual_printf_gap_f(dapl_id, gap_size, hdferr) IMPLICIT NONE - + INTEGER(HID_T) , INTENT(IN) :: dapl_id INTEGER(HSIZE_T), INTENT(OUT) :: gap_size INTEGER , INTENT(OUT) :: hdferr @@ -7742,7 +7742,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) END INTERFACE hdferr = INT( h5pget_virtual_printf_gap(dapl_id, gap_size) ) - + END SUBROUTINE h5pget_virtual_printf_gap_f !****s* H5P/h5pset_virtual_f @@ -7753,9 +7753,9 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! Sets the mapping between virtual and source datasets. ! ! INPUTS -! dcpl_id - The identifier of the dataset creation property list that will be +! dcpl_id - The identifier of the dataset creation property list that will be ! used when creating the virtual dataset. -! vspace_id - The dataspace identifier with the selection within the virtual +! vspace_id - The dataspace identifier with the selection within the virtual ! dataset applied, possibly an unlimited selection. ! src_file_name - The name of the HDF5 file where the source dataset is located. ! src_dset_name - The path to the HDF5 dataset in the file specified by src_file_name. @@ -7773,7 +7773,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! SOURCE SUBROUTINE h5pset_virtual_f(dcpl_id, vspace_id, src_file_name, src_dset_name, src_space_id, hdferr) IMPLICIT NONE - + INTEGER(HID_T), INTENT(IN) :: dcpl_id INTEGER(HID_T), INTENT(IN) :: vspace_id CHARACTER(LEN=*), INTENT(IN) :: src_file_name @@ -7813,7 +7813,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! Gets the number of mappings for the virtual dataset. ! ! INPUTS -! dcpl_id - The identifier of the virtual dataset creation property list. +! dcpl_id - The identifier of the virtual dataset creation property list. ! ! OUTPUTS ! count - The number of mappings. @@ -7828,7 +7828,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) SUBROUTINE h5pget_virtual_count_f(dcpl_id, count, hdferr) IMPLICIT NONE - + INTEGER(HID_T), INTENT(IN) :: dcpl_id INTEGER(SIZE_T), INTENT(OUT) :: count INTEGER, INTENT(OUT) :: hdferr @@ -7841,7 +7841,7 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) INTEGER(SIZE_T), INTENT(OUT) :: count END FUNCTION h5pget_virtual_count END INTERFACE - + hdferr = INT( h5pget_virtual_count(dcpl_id, count)) END SUBROUTINE h5pget_virtual_count_f @@ -7856,10 +7856,10 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) ! INPUTS ! dcpl_id - The identifier of the virtual dataset creation property list. ! index - Mapping index. -! The value of index is 0 (zero) or greater and less than count (0 ≤ index < count), +! The value of index is 0 (zero) or greater and less than count (0 ≤ index < count), ! where count is the number of mappings returned by h5pget_virtual_count. ! -! OUTPUTS +! OUTPUTS ! hdferr - Returns 0 if successful and -1 if fails. ! ! AUTHOR @@ -7886,9 +7886,9 @@ SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) INTEGER(SIZE_T), INTENT(IN), VALUE :: index END FUNCTION h5pget_virtual_vspace END INTERFACE - + ds_id = h5pget_virtual_vspace(dcpl_id, index) - + hdferr = 0 IF(ds_id.LT.0) hdferr = -1 @@ -7904,7 +7904,7 @@ END SUBROUTINE h5pget_virtual_vspace_f ! INPUTS ! dcpl_id - The identifier of the virtual dataset creation property list. ! index - Mapping index. -! The value of index is 0 (zero) or greater and less than count (0 ≤ index < count), +! The value of index is 0 (zero) or greater and less than count (0 ≤ index < count), ! where count is the number of mappings returned by h5pget_virtual_count. ! ! @@ -7936,7 +7936,7 @@ SUBROUTINE h5pget_virtual_srcspace_f(dcpl_id, index, ds_id, hdferr) INTEGER(SIZE_T), INTENT(IN), VALUE :: index END FUNCTION h5pget_virtual_srcspace END INTERFACE - + ds_id = h5pget_virtual_srcspace(dcpl_id, index) hdferr = 0 @@ -7954,9 +7954,9 @@ END SUBROUTINE h5pget_virtual_srcspace_f ! INPUTS ! dcpl_id - The identifier of the virtual dataset creation property list. ! index - Mapping index. -! The value of index is 0 (zero) or greater and less than count (0 ≤ index < count), +! The value of index is 0 (zero) or greater and less than count (0 ≤ index < count), ! where count is the number of mappings returned by h5pget_virtual_count. -! +! ! OUTPUTS ! name - A buffer containing the name of the file containing the source dataset. ! hdferr - Returns 0 if successful and -1 if fails. @@ -7983,7 +7983,7 @@ SUBROUTINE h5pget_virtual_filename_f(dcpl_id, index, name, hdferr, name_len) CHARACTER(LEN=1,KIND=C_CHAR), DIMENSION(1:LEN(name)+1), TARGET :: c_name TYPE(C_PTR) :: f_ptr - + INTERFACE INTEGER(SIZE_T) FUNCTION h5pget_virtual_filename(dcpl_id, index, name, size) BIND(C, NAME='H5Pget_virtual_filename') IMPORT :: HID_T, SIZE_T, C_PTR @@ -8022,9 +8022,9 @@ END SUBROUTINE h5pget_virtual_filename_f ! INPUTS ! dcpl_id - The identifier of the virtual dataset creation property list. ! index - Mapping index. -! The value of index is 0 (zero) or greater and less than count (0 ≤ index < count), +! The value of index is 0 (zero) or greater and less than count (0 ≤ index < count), ! where count is the number of mappings returned by h5pget_virtual_count. -! +! ! OUTPUTS ! name - A buffer containing the name of the source dataset. ! hdferr - Returns 0 if successful and -1 if fails. @@ -8051,7 +8051,7 @@ SUBROUTINE h5pget_virtual_dsetname_f(dcpl_id, index, name, hdferr, name_len) CHARACTER(LEN=1,KIND=C_CHAR), DIMENSION(1:LEN(name)+1), TARGET :: c_name TYPE(C_PTR) :: f_ptr - + INTERFACE INTEGER(SIZE_T) FUNCTION h5pget_virtual_dsetname(dcpl_id, index, name, size) BIND(C, NAME='H5Pget_virtual_dsetname') IMPORT :: HID_T, SIZE_T, C_PTR @@ -8120,7 +8120,7 @@ END SUBROUTINE h5pget_virtual_dsetname_f hdferr = INT(h5pget_dset_no_attrs_hint_c(dcpl_id, c_minimize)) - ! Transfer value of C C_BOOL type to Fortran LOGICAL + ! Transfer value of C C_BOOL type to Fortran LOGICAL minimize = c_minimize END SUBROUTINE h5pget_dset_no_attrs_hint_f diff --git a/fortran/src/H5Rff.F90 b/fortran/src/H5Rff.F90 index c911b1a..e5cfb1d 100644 --- a/fortran/src/H5Rff.F90 +++ b/fortran/src/H5Rff.F90 @@ -61,7 +61,7 @@ MODULE H5R PRIVATE h5rcreate_object_f, h5rcreate_region_f, h5rcreate_ptr_f PRIVATE h5rdereference_object_f, h5rdereference_region_f, h5rdereference_ptr_f PRIVATE h5rget_name_object_f, h5rget_name_region_f, h5rget_name_ptr_f - + INTERFACE h5rget_object_type_f MODULE PROCEDURE h5rget_object_type_obj_f diff --git a/fortran/src/H5Sff.F90 b/fortran/src/H5Sff.F90 index e6f8e4c..5199ed6 100644 --- a/fortran/src/H5Sff.F90 +++ b/fortran/src/H5Sff.F90 @@ -49,7 +49,7 @@ CONTAINS ! NAME ! h5screate_simple_f ! -! PURPOSE +! PURPOSE ! Creates a new simple data space and opens it for access . ! ! INPUTS @@ -104,7 +104,7 @@ CONTAINS ENDIF hdferr = h5screate_simple_c(rank, dims, f_maxdims, space_id) DEALLOCATE(f_maxdims) - + END SUBROUTINE h5screate_simple_f ! @@ -142,9 +142,9 @@ CONTAINS INTEGER(HID_T), INTENT(IN) :: space_id END FUNCTION h5sclose_c END INTERFACE - + hdferr = h5sclose_c(space_id) - + END SUBROUTINE h5sclose_f ! @@ -193,9 +193,9 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: space_id END FUNCTION h5screate_c END INTERFACE - + hdferr = h5screate_c(classtype, space_id) - + END SUBROUTINE h5screate_f ! @@ -287,7 +287,7 @@ CONTAINS END INTERFACE hdferr = h5sget_select_hyper_nblocks_c (space_id, num_blocks) - + END SUBROUTINE h5sget_select_hyper_nblocks_f ! @@ -319,7 +319,7 @@ CONTAINS SUBROUTINE h5sget_select_hyper_blocklist_f(space_id, startblock, & num_blocks, buf, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T), INTENT(IN) :: space_id INTEGER(HSIZE_T), INTENT(IN) :: startblock INTEGER(HSIZE_T), INTENT(IN) :: num_blocks INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf @@ -432,7 +432,7 @@ CONTAINS END INTERFACE hdferr = h5sget_select_elem_npoints_c (space_id, num_points) - + END SUBROUTINE h5sget_select_elem_npoints_f ! @@ -481,10 +481,10 @@ CONTAINS INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf END FUNCTION h5sget_select_elem_pointlist_c END INTERFACE - + hdferr = h5sget_select_elem_pointlist_c(space_id, startpoint, & num_points, buf ) - + END SUBROUTINE h5sget_select_elem_pointlist_f ! @@ -500,8 +500,8 @@ CONTAINS ! INPUTS ! space_id - dataspace identifier ! operator - flag, valid values are: -! H5S_SELECT_SET_F -! H5S_SELECT_APPEND_F +! H5S_SELECT_SET_F +! H5S_SELECT_APPEND_F ! H5S_SELECT_PREPEND_F ! rank - number of dataspace dimensions ! num_elements - number of elements to be selected @@ -527,7 +527,7 @@ CONTAINS INTEGER, INTENT(IN) :: rank INTEGER(SIZE_T), INTENT(IN) :: num_elements INTEGER(HSIZE_T), INTENT(IN) , DIMENSION(rank,num_elements) :: coord - INTEGER, INTENT(OUT) :: hdferr + INTEGER, INTENT(OUT) :: hdferr !***** INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:,:) :: c_coord INTEGER :: error, i @@ -595,7 +595,7 @@ CONTAINS SUBROUTINE h5sselect_all_f(space_id, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER, INTENT(OUT) :: hdferr + INTEGER, INTENT(OUT) :: hdferr !***** INTERFACE INTEGER FUNCTION h5sselect_all_c(space_id) BIND(C,NAME='h5sselect_all_c') @@ -604,9 +604,9 @@ CONTAINS INTEGER(HID_T), INTENT(IN) :: space_id END FUNCTION h5sselect_all_c END INTERFACE - + hdferr = h5sselect_all_c(space_id) - + END SUBROUTINE h5sselect_all_f ! @@ -646,9 +646,9 @@ CONTAINS INTEGER(HID_T), INTENT(IN) :: space_id END FUNCTION h5sselect_none_c END INTERFACE - + hdferr = h5sselect_none_c(space_id) - + END SUBROUTINE h5sselect_none_f ! @@ -665,8 +665,8 @@ CONTAINS ! space_id - identifier for the dataspace for which ! selection is verified ! OUTPUTS -! status - TRUE if the selection is contained within -! the extent, FALSE otherwise. +! status - TRUE if the selection is contained within +! the extent, FALSE otherwise. ! hdferr - Returns 0 if successful and -1 if fails ! ! AUTHOR @@ -695,11 +695,11 @@ CONTAINS INTEGER :: flag END FUNCTION h5sselect_valid_c END INTERFACE - + hdferr = h5sselect_valid_c(space_id, flag) status = .TRUE. IF (flag .EQ. 0) status = .FALSE. - + END SUBROUTINE h5sselect_valid_f ! @@ -729,7 +729,7 @@ CONTAINS ! SOURCE SUBROUTINE h5sget_simple_extent_npoints_f(space_id, npoints, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T), INTENT(IN) :: space_id INTEGER(HSIZE_T), INTENT(OUT) :: npoints INTEGER, INTENT(OUT) :: hdferr !***** @@ -783,7 +783,7 @@ CONTAINS INTEGER(HSSIZE_T), INTENT(OUT) :: npoints END FUNCTION h5sget_select_npoints_c END INTERFACE - + hdferr = h5sget_select_npoints_c(space_id, npoints) END SUBROUTINE h5sget_select_npoints_f @@ -826,9 +826,9 @@ CONTAINS INTEGER, INTENT(OUT) :: rank END FUNCTION h5sget_simple_extent_ndims_c END INTERFACE - + hdferr = h5sget_simple_extent_ndims_c(space_id, rank) - + END SUBROUTINE h5sget_simple_extent_ndims_f ! !****s* H5S/h5sget_simple_extent_dims_f @@ -873,9 +873,9 @@ CONTAINS INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: maxdims END FUNCTION h5sget_simple_extent_dims_c END INTERFACE - + hdferr = h5sget_simple_extent_dims_c(space_id, dims, maxdims) - + END SUBROUTINE h5sget_simple_extent_dims_f ! @@ -920,9 +920,9 @@ CONTAINS INTEGER, INTENT(OUT) :: classtype END FUNCTION h5sget_simple_extent_type_c END INTERFACE - + hdferr = h5sget_simple_extent_type_c(space_id, classtype) - + END SUBROUTINE h5sget_simple_extent_type_f ! !****s* H5S/h5sset_extent_simple_f @@ -970,7 +970,7 @@ CONTAINS INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: maximum_size END FUNCTION h5sset_extent_simple_c END INTERFACE - + hdferr = h5sset_extent_simple_c(space_id, rank, current_size, & maximum_size) @@ -1016,11 +1016,11 @@ CONTAINS INTEGER :: flag END FUNCTION h5sis_simple_c END INTERFACE - + hdferr = h5sis_simple_c(space_id, flag) status = .TRUE. IF (flag .EQ. 0) status = .FALSE. - + END SUBROUTINE h5sis_simple_f ! @@ -1156,9 +1156,9 @@ CONTAINS INTEGER(HID_T), INTENT(IN) :: space_id END FUNCTION h5sset_extent_none_c END INTERFACE - + hdferr = h5sset_extent_none_c(space_id) - + END SUBROUTINE h5sset_extent_none_f ! !****s* H5S/h5sselect_hyperslab_f @@ -1196,7 +1196,7 @@ CONTAINS SUBROUTINE h5sselect_hyperslab_f(space_id, OPERATOR, start, count, & hdferr, stride, BLOCK) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T), INTENT(IN) :: space_id INTEGER, INTENT(IN) :: OPERATOR INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count @@ -1208,7 +1208,7 @@ CONTAINS INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_stride INTEGER :: rank INTEGER :: error1, error2 - + INTERFACE INTEGER FUNCTION h5sselect_hyperslab_c(space_id, OPERATOR, & start, count, stride, BLOCK) BIND(C,NAME='h5sselect_hyperslab_c') @@ -1248,7 +1248,7 @@ CONTAINS DEALLOCATE(def_block) RETURN ENDIF - + IF (.NOT.PRESENT(stride).AND. PRESENT(BLOCK)) THEN ALLOCATE(def_stride(rank), stat=error2) IF (error2.NE.0) THEN @@ -1273,7 +1273,7 @@ CONTAINS def_stride, def_block) DEALLOCATE(def_block) DEALLOCATE(def_stride) - + END SUBROUTINE h5sselect_hyperslab_f ! !$! ! !$!****s* H5S/h5scombine_hyperslab_f @@ -1618,10 +1618,10 @@ CONTAINS INTEGER, INTENT(OUT) :: TYPE END FUNCTION h5sget_select_type_c END INTERFACE - + hdferr = h5sget_select_type_c(space_id, TYPE) RETURN - + END SUBROUTINE h5sget_select_type_f ! @@ -1779,7 +1779,7 @@ CONTAINS ! January, 28 2016 ! SOURCE SUBROUTINE h5sget_regular_hyperslab_f(space_id, start, stride, count, block, hdferr) - + IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: space_id INTEGER(HSIZE_T), INTENT(OUT), DIMENSION(*), TARGET :: start @@ -1790,7 +1790,7 @@ CONTAINS !***** TYPE(C_PTR) :: start_c, stride_c, count_c, block_c INTEGER :: n - + INTERFACE INTEGER FUNCTION h5sget_regular_hyperslab(space_id, start, stride, count, block) BIND(C,NAME='H5Sget_regular_hyperslab') IMPORT :: HID_T, C_PTR @@ -1809,7 +1809,7 @@ CONTAINS IF(INT(h5sget_regular_hyperslab(space_id, start_c, stride_c, count_c, block_c)).LT.0) hdferr = -1 - ! Reverse the C arrays description values of the hyperslab because + ! Reverse the C arrays description values of the hyperslab because ! the hyperslab was for a C stored hyperslab CALL H5Sget_simple_extent_ndims_f(space_id,n,hdferr) @@ -1848,8 +1848,8 @@ CONTAINS LOGICAL :: IsRegular INTEGER, INTENT(OUT) :: hdferr !***** - INTEGER(C_INT) :: status - + INTEGER(C_INT) :: status + INTERFACE INTEGER(C_INT) FUNCTION H5Sis_regular_hyperslab(space_id) BIND(C,NAME='H5Sis_regular_hyperslab') IMPORT :: HID_T, C_INT diff --git a/fortran/src/H5Tff.F90 b/fortran/src/H5Tff.F90 index 46c8f39..25eb613 100644 --- a/fortran/src/H5Tff.F90 +++ b/fortran/src/H5Tff.F90 @@ -28,7 +28,7 @@ ! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** ! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** ! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| -! +! ! If you add a new function here then you MUST add the function name to the ! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. ! This is needed for Windows based operating systems. @@ -41,7 +41,7 @@ MODULE H5T USE H5GLOBAL IMPLICIT NONE - PRIVATE h5tenum_insert_f03, h5tenum_insert_f90 + PRIVATE h5tenum_insert_f03, h5tenum_insert_f90 !****t* H5T/hvl_t ! Fortran2003 Derived Type: @@ -92,7 +92,7 @@ CONTAINS ! SOURCE SUBROUTINE h5topen_f(loc_id, name, type_id, hdferr, tapl_id) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER(HID_T), INTENT(IN) :: loc_id CHARACTER(LEN=*), INTENT(IN) :: name INTEGER(HID_T), INTENT(OUT) :: type_id INTEGER, INTENT(OUT) :: hdferr @@ -231,7 +231,7 @@ CONTAINS ! SOURCE SUBROUTINE h5tcopy_f(type_id, new_type_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: type_id INTEGER(HID_T), INTENT(OUT) :: new_type_id INTEGER, INTENT(OUT) :: hdferr !***** @@ -242,7 +242,7 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: new_type_id END FUNCTION h5tcopy_c END INTERFACE - + hdferr = h5tcopy_c(type_id, new_type_id) END SUBROUTINE h5tcopy_f ! @@ -288,7 +288,7 @@ CONTAINS INTEGER :: c_flag END FUNCTION h5tequal_c END INTERFACE - + flag = .FALSE. hdferr = h5tequal_c(type1_id, type2_id, c_flag) IF(c_flag .GT. 0) flag = .TRUE. @@ -329,7 +329,7 @@ CONTAINS INTEGER(HID_T), INTENT(IN) :: type_id END FUNCTION h5tclose_c END INTERFACE - + hdferr = h5tclose_c(type_id) END SUBROUTINE h5tclose_f ! @@ -356,7 +356,7 @@ CONTAINS ! H5T_REFERENCE_F (7) ! H5T_ENUM_F (8) ! H5T_VLEN_F (9) -! H5T_ARRAY_F (10) +! H5T_ARRAY_F (10) ! hdferr - Returns 0 if successful and -1 if fails ! ! AUTHOR @@ -372,7 +372,7 @@ CONTAINS SUBROUTINE h5tget_class_f(type_id, class, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: class + INTEGER, INTENT(OUT) :: class INTEGER, INTENT(OUT) :: hdferr !***** INTERFACE @@ -425,7 +425,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(OUT) :: size END FUNCTION h5tget_size_c END INTERFACE - + hdferr = h5tget_size_c(type_id, size) END SUBROUTINE h5tget_size_f @@ -469,7 +469,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(IN) :: size END FUNCTION h5tset_size_c END INTERFACE - + hdferr = h5tset_size_c(type_id, size) END SUBROUTINE h5tset_size_f @@ -519,7 +519,7 @@ CONTAINS INTEGER, INTENT(OUT) :: order END FUNCTION h5tget_order_c END INTERFACE - + hdferr = h5tget_order_c(type_id, order) END SUBROUTINE h5tget_order_f ! @@ -567,7 +567,7 @@ CONTAINS INTEGER, INTENT(IN) :: order END FUNCTION h5tset_order_c END INTERFACE - + hdferr = h5tset_order_c(type_id, order) END SUBROUTINE h5tset_order_f @@ -600,7 +600,7 @@ CONTAINS IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: type_id INTEGER(SIZE_T), INTENT(OUT) :: precision - INTEGER, INTENT(OUT) :: hdferr + INTEGER, INTENT(OUT) :: hdferr !***** INTERFACE INTEGER FUNCTION h5tget_precision_c(type_id, PRECISION) BIND(C,NAME='h5tget_precision_c') @@ -642,7 +642,7 @@ CONTAINS SUBROUTINE h5tset_precision_f(type_id, PRECISION, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(IN) :: PRECISION + INTEGER(SIZE_T), INTENT(IN) :: PRECISION INTEGER, INTENT(OUT) :: hdferr !***** INTERFACE @@ -653,7 +653,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(IN) :: PRECISION END FUNCTION h5tset_precision_c END INTERFACE - + hdferr = h5tset_precision_c(type_id, PRECISION) END SUBROUTINE h5tset_precision_f @@ -695,10 +695,10 @@ CONTAINS INTEGER(SIZE_T), INTENT(OUT) :: offset END FUNCTION h5tget_offset_c END INTERFACE - + hdferr = h5tget_offset_c(type_id, offset) END SUBROUTINE h5tget_offset_f - + ! !****s* H5T/h5tset_offset_f ! @@ -737,10 +737,10 @@ CONTAINS INTEGER(SIZE_T), INTENT(IN) :: offset END FUNCTION h5tset_offset_c END INTERFACE - + hdferr = h5tset_offset_c(type_id, offset) END SUBROUTINE h5tset_offset_f - + ! !****s* H5T/h5tget_pad_f ! @@ -757,7 +757,7 @@ CONTAINS ! lsbpad - least-significant bit padding type ! msbpad - most-significant bit padding type ! Possible values of padding type are: -! H5T_PAD_ERROR_F +! H5T_PAD_ERROR_F ! H5T_PAD_ZERO_F ! H5T_PAD_ONE_F ! H5T_PAD_BACKGROUND_F @@ -790,7 +790,7 @@ CONTAINS INTEGER, INTENT(OUT) :: msbpad END FUNCTION h5tget_pad_c END INTERFACE - + hdferr = h5tget_pad_c(type_id, lsbpad, msbpad) END SUBROUTINE h5tget_pad_f @@ -841,10 +841,10 @@ CONTAINS INTEGER, INTENT(IN) :: msbpad END FUNCTION h5tset_pad_c END INTERFACE - + hdferr = h5tset_pad_c(type_id, lsbpad, msbpad) END SUBROUTINE h5tset_pad_f - + ! !****s* H5T/h5tget_sign_f ! @@ -859,7 +859,7 @@ CONTAINS ! OUTPUTS ! sign - sign type ! Possible values are: -! - Unsigned integer type +! - Unsigned integer type ! H5T_SGN_NONE_F = 0 ! - Two's complement signed integer type ! H5T_SGN_2_F = 1 @@ -877,7 +877,7 @@ CONTAINS ! SOURCE SUBROUTINE h5tget_sign_f(type_id, sign, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: type_id INTEGER, INTENT(OUT) :: sign INTEGER, INTENT(OUT) :: hdferr !***** @@ -890,10 +890,10 @@ CONTAINS INTEGER, INTENT(OUT) :: sign END FUNCTION h5tget_sign_c END INTERFACE - + hdferr = h5tget_sign_c(type_id, sign) END SUBROUTINE h5tget_sign_f - + ! !****s* H5T/h5tset_sign_f ! @@ -907,7 +907,7 @@ CONTAINS ! type_id - datatype identifier ! sign - sign type ! Possible values are: -! - Unsigned integer type +! - Unsigned integer type ! H5T_SGN_NONE_F = 0 ! - Two's complement signed integer type ! H5T_SGN_2_F = 1 @@ -938,7 +938,7 @@ CONTAINS INTEGER, INTENT(IN) :: sign END FUNCTION h5tset_sign_c END INTERFACE - + hdferr = h5tset_sign_c(type_id, sign) END SUBROUTINE h5tset_sign_f @@ -994,7 +994,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(OUT) :: msize END FUNCTION h5tget_fields_c END INTERFACE - + hdferr = h5tget_fields_c(type_id, spos, epos, esize, mpos, msize) END SUBROUTINE h5tget_fields_f @@ -1028,7 +1028,7 @@ CONTAINS ! SOURCE SUBROUTINE h5tset_fields_f(type_id, spos, epos, esize, mpos, msize, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: type_id INTEGER(SIZE_T), INTENT(IN) :: spos INTEGER(SIZE_T), INTENT(IN) :: epos INTEGER(SIZE_T), INTENT(IN) :: esize @@ -1050,10 +1050,10 @@ CONTAINS INTEGER(SIZE_T), INTENT(IN) :: msize END FUNCTION h5tset_fields_c END INTERFACE - + hdferr = h5tset_fields_c(type_id, spos, epos, esize, mpos, msize) END SUBROUTINE h5tset_fields_f - + ! !****s* H5T/h5tget_ebias_f ! @@ -1084,7 +1084,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(OUT) :: ebias INTEGER, INTENT(OUT) :: hdferr !***** - + INTERFACE INTEGER FUNCTION h5tget_ebias_c(type_id, ebias) BIND(C,NAME='h5tget_ebias_c') IMPORT :: HID_T, SIZE_T @@ -1093,7 +1093,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(OUT) :: ebias END FUNCTION h5tget_ebias_c END INTERFACE - + hdferr = h5tget_ebias_c(type_id, ebias) END SUBROUTINE h5tget_ebias_f @@ -1135,7 +1135,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(IN) :: ebias END FUNCTION h5tset_ebias_c END INTERFACE - + hdferr = h5tset_ebias_c(type_id, ebias) END SUBROUTINE h5tset_ebias_f @@ -1182,7 +1182,7 @@ CONTAINS INTEGER, INTENT(OUT) :: norm END FUNCTION h5tget_norm_c END INTERFACE - + hdferr = h5tget_norm_c(type_id, norm) END SUBROUTINE h5tget_norm_f @@ -1228,7 +1228,7 @@ CONTAINS INTEGER, INTENT(IN) :: norm END FUNCTION h5tset_norm_c END INTERFACE - + hdferr = h5tset_norm_c(type_id, norm) END SUBROUTINE h5tset_norm_f @@ -1275,7 +1275,7 @@ CONTAINS INTEGER, INTENT(OUT) :: padtype END FUNCTION h5tget_inpad_c END INTERFACE - + hdferr = h5tget_inpad_c(type_id, padtype) END SUBROUTINE h5tget_inpad_f @@ -1321,7 +1321,7 @@ CONTAINS INTEGER, INTENT(IN) :: padtype END FUNCTION h5tset_inpad_c END INTERFACE - + hdferr = h5tset_inpad_c(type_id, padtype) END SUBROUTINE h5tset_inpad_f @@ -1366,7 +1366,7 @@ CONTAINS INTEGER, INTENT(OUT) :: cset END FUNCTION h5tget_cset_c END INTERFACE - + hdferr = h5tget_cset_c(type_id, cset) END SUBROUTINE h5tget_cset_f @@ -1411,7 +1411,7 @@ CONTAINS INTEGER, INTENT(IN) :: cset END FUNCTION h5tset_cset_c END INTERFACE - + hdferr = h5tset_cset_c(type_id, cset) END SUBROUTINE h5tset_cset_f ! @@ -1457,7 +1457,7 @@ CONTAINS INTEGER, INTENT(OUT) :: strpad END FUNCTION h5tget_strpad_c END INTERFACE - + hdferr = h5tget_strpad_c(type_id, strpad) END SUBROUTINE h5tget_strpad_f @@ -1547,7 +1547,7 @@ CONTAINS INTEGER, INTENT(OUT) :: num_members END FUNCTION h5tget_nmembers_c END INTERFACE - + hdferr = h5tget_nmembers_c(type_id, num_members) END SUBROUTINE h5tget_nmembers_f @@ -1596,7 +1596,7 @@ CONTAINS INTEGER, INTENT(OUT) :: namelen END FUNCTION h5tget_member_name_c END INTERFACE - + hdferr = h5tget_member_name_c(type_id, index, member_name, namelen) END SUBROUTINE h5tget_member_name_f @@ -1641,7 +1641,7 @@ CONTAINS INTEGER(SIZE_T), INTENT(OUT) :: offset END FUNCTION h5tget_member_offset_c END INTERFACE - + hdferr = h5tget_member_offset_c(type_id, member_no, offset ) END SUBROUTINE h5tget_member_offset_f ! @@ -1686,11 +1686,11 @@ CONTAINS INTEGER, INTENT(OUT) :: index END FUNCTION h5tget_member_index_c END INTERFACE - + namelen = LEN(name) hdferr = h5tget_member_index_c(type_id, name, namelen, index) END SUBROUTINE h5tget_member_index_f - + ! !$! ! !$!****s* H5T/h5tget_member_dim_f @@ -1774,9 +1774,9 @@ CONTAINS INTEGER(HSIZE_T),DIMENSION(*), INTENT(OUT) :: dims END FUNCTION h5tget_array_dims_c END INTERFACE - + hdferr = h5tget_array_dims_c(type_id, dims) - + END SUBROUTINE h5tget_array_dims_f ! @@ -1817,9 +1817,9 @@ CONTAINS INTEGER, INTENT(OUT) :: ndims END FUNCTION h5tget_array_ndims_c END INTERFACE - + hdferr = h5tget_array_ndims_c(type_id, ndims) - + END SUBROUTINE h5tget_array_ndims_f ! @@ -1860,9 +1860,9 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: base_type_id END FUNCTION h5tget_super_c END INTERFACE - + hdferr = h5tget_super_c(type_id, base_type_id) - + END SUBROUTINE h5tget_super_f ! @@ -1908,7 +1908,7 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: datatype END FUNCTION h5tget_member_type_c END INTERFACE - + hdferr = h5tget_member_type_c(type_id, field_idx , datatype) END SUBROUTINE h5tget_member_type_f @@ -1992,7 +1992,7 @@ CONTAINS SUBROUTINE h5tinsert_f(type_id, name, offset, field_id, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: name + CHARACTER(LEN=*), INTENT(IN) :: name INTEGER(SIZE_T), INTENT(IN) :: offset INTEGER(HID_T), INTENT(IN) :: field_id INTEGER, INTENT(OUT) :: hdferr @@ -2011,11 +2011,11 @@ CONTAINS INTEGER :: namelen END FUNCTION h5tinsert_c END INTERFACE - + namelen = LEN(name) hdferr = h5tinsert_c(type_id, name, namelen, offset, field_id ) END SUBROUTINE h5tinsert_f - + ! !****s* H5T/h5tpack_f ! @@ -2051,10 +2051,10 @@ CONTAINS INTEGER(HID_T), INTENT(IN) :: type_id END FUNCTION h5tpack_c END INTERFACE - + hdferr = h5tpack_c(type_id) END SUBROUTINE h5tpack_f - + ! !$! ! !$!****s* H5T/h5tinsert_array_f ! !$! @@ -2150,9 +2150,9 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: type_id END FUNCTION h5tarray_create_c END INTERFACE - + hdferr = h5tarray_create_c(base_id, rank, dims, type_id) - + END SUBROUTINE h5tarray_create_f ! @@ -2194,7 +2194,7 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: new_type_id END FUNCTION h5tenum_create_c END INTERFACE - + hdferr = h5tenum_create_c(parent_id, new_type_id) END SUBROUTINE h5tenum_create_f ! @@ -2225,9 +2225,9 @@ CONTAINS ! port). March 7, 2001 ! ! NOTE -! According to the standard: Because an INTENT(OUT) variable is considered undefined -! on entry to the procedure, any default initialization specified for its type will -! be applied. So we need to blank out the "name" to be portable and eliminate any +! According to the standard: Because an INTENT(OUT) variable is considered undefined +! on entry to the procedure, any default initialization specified for its type will +! be applied. So we need to blank out the "name" to be portable and eliminate any ! characters the "name' may contain upon entry, depending on compiler implementation. ! SOURCE SUBROUTINE h5tenum_nameof_f(type_id, value, namelen, name, hdferr) @@ -2249,7 +2249,7 @@ CONTAINS INTEGER, INTENT(IN) :: value END FUNCTION h5tenum_nameof_c END INTERFACE - + name(1:LEN(name)) = ' ' hdferr = h5tenum_nameof_c(type_id, value, name, namelen) @@ -2302,7 +2302,7 @@ CONTAINS INTEGER, INTENT(OUT) :: value END FUNCTION h5tenum_valueof_c END INTERFACE - + namelen = LEN(name) hdferr = h5tenum_valueof_c(type_id, name, namelen, value) END SUBROUTINE h5tenum_valueof_f @@ -2349,10 +2349,10 @@ CONTAINS INTEGER, INTENT(OUT) :: value END FUNCTION h5tget_member_value_c END INTERFACE - + hdferr = h5tget_member_value_c(type_id, member_no, value) END SUBROUTINE h5tget_member_value_f - + ! !****s* H5T/h5tset_tag_f ! @@ -2385,7 +2385,7 @@ CONTAINS INTEGER, INTENT(OUT) :: hdferr !***** INTEGER :: taglen - + INTERFACE INTEGER FUNCTION h5tset_tag_c(type_id, tag, taglen) BIND(C,NAME='h5tset_tag_c') IMPORT :: C_CHAR @@ -2396,11 +2396,11 @@ CONTAINS INTEGER :: taglen END FUNCTION h5tset_tag_c END INTERFACE - + taglen = LEN(tag) hdferr = h5tset_tag_c(type_id, tag, taglen) END SUBROUTINE h5tset_tag_f - + ! !****s* H5T/h5tget_tag_f ! @@ -2434,7 +2434,7 @@ CONTAINS INTEGER, INTENT(OUT) :: taglen INTEGER, INTENT(OUT) :: hdferr !***** - INTEGER(SIZE_T):: tag_size ! Declared character length of tab + INTEGER(SIZE_T):: tag_size ! Declared character length of tab INTERFACE INTEGER FUNCTION h5tget_tag_c(type_id, tag, tag_size, taglen) & BIND(C,NAME='h5tget_tag_c') @@ -2447,11 +2447,11 @@ CONTAINS INTEGER, INTENT(OUT) :: taglen END FUNCTION h5tget_tag_c END INTERFACE - + tag_size = LEN(tag) hdferr = h5tget_tag_c(type_id, tag, tag_size, taglen ) END SUBROUTINE h5tget_tag_f - + ! !****s* H5T/h5tvlen_create_f ! @@ -2489,7 +2489,7 @@ CONTAINS INTEGER(HID_T), INTENT(OUT) :: vltype_id END FUNCTION h5tvlen_create_c END INTERFACE - + hdferr = h5tvlen_create_c(type_id, vltype_id) END SUBROUTINE h5tvlen_create_f @@ -2517,11 +2517,11 @@ CONTAINS SUBROUTINE h5tis_variable_str_f(type_id, status, hdferr) IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: type_id - LOGICAL, INTENT(OUT) :: status + LOGICAL, INTENT(OUT) :: status INTEGER, INTENT(OUT) :: hdferr !***** INTEGER :: flag ! "TRUE/FALSE/ERROR from C" - + INTERFACE INTEGER FUNCTION h5tis_variable_str_c(type_id, flag) & BIND(C,NAME='h5tis_variable_str_c') @@ -2531,13 +2531,13 @@ CONTAINS INTEGER :: flag END FUNCTION h5tis_variable_str_c END INTERFACE - + hdferr = h5tis_variable_str_c(type_id, flag) status = .TRUE. IF (flag .EQ. 0) status = .FALSE. - + END SUBROUTINE h5tis_variable_str_f - + ! !****s* H5T/h5tget_member_class_f ! @@ -2728,7 +2728,7 @@ CONTAINS SUBROUTINE h5tdecode_f(buf, obj_id, hdferr) IMPLICIT NONE CHARACTER(LEN=*), INTENT(IN) :: buf - INTEGER(HID_T), INTENT(OUT) :: obj_id + INTEGER(HID_T), INTENT(OUT) :: obj_id INTEGER, INTENT(OUT) :: hdferr !***** INTERFACE @@ -2811,7 +2811,7 @@ CONTAINS ! SOURCE SUBROUTINE h5tget_create_plist_f(dtype_id, dtpl_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dtype_id + INTEGER(HID_T), INTENT(IN) :: dtype_id INTEGER(HID_T), INTENT(OUT) :: dtpl_id INTEGER, INTENT(OUT) :: hdferr !***** @@ -2884,7 +2884,7 @@ CONTAINS ! ! INPUTS ! dtype_id - Datatype identifier for the dataset datatype. -! +! ! direction - Direction of search: ! H5T_DIR_DEFAULT, default direction is inscendent, ! H5T_DIR_ASCEND , in inscendent order, @@ -2901,8 +2901,8 @@ CONTAINS ! SOURCE SUBROUTINE h5tget_native_type_f(dtype_id, direction, native_dtype_id, hdferr) IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dtype_id - INTEGER, INTENT(IN) :: direction + INTEGER(HID_T), INTENT(IN) :: dtype_id + INTEGER, INTENT(IN) :: direction INTEGER(HID_T), INTENT(OUT) :: native_dtype_id INTEGER, INTENT(OUT) :: hdferr !***** @@ -3025,7 +3025,7 @@ CONTAINS INTEGER :: namelen END FUNCTION h5tenum_insert_c END INTERFACE - + namelen = LEN(name) hdferr = h5tenum_insert_c(type_id, name, namelen, value) END SUBROUTINE h5tenum_insert_f90 @@ -3061,7 +3061,7 @@ CONTAINS INTEGER, INTENT(OUT) :: hdferr !***** INTEGER :: namelen - + INTERFACE INTEGER FUNCTION h5tenum_insert_ptr_c(type_id, name, namelen, value) & BIND(C, NAME='h5tenum_insert_ptr_c') @@ -3074,7 +3074,7 @@ CONTAINS TYPE(C_PTR), VALUE :: value END FUNCTION h5tenum_insert_ptr_c END INTERFACE - + namelen = LEN(name) hdferr = h5tenum_insert_ptr_c(type_id, name, namelen, value) END SUBROUTINE h5tenum_insert_f03 diff --git a/fortran/src/H5VLff.F90 b/fortran/src/H5VLff.F90 index 32dd7d7..ae03cee 100644 --- a/fortran/src/H5VLff.F90 +++ b/fortran/src/H5VLff.F90 @@ -82,7 +82,7 @@ CONTAINS INTEGER(HID_T), INTENT(IN), VALUE :: vipl_id END FUNCTION H5VLregister_connector_by_name END INTERFACE - + vipl_id_default = H5P_DEFAULT_F IF(PRESENT(vipl_id)) vipl_id_default = vipl_id @@ -136,7 +136,7 @@ CONTAINS ! INPUTS ! name - Connector name ! OUTPUTS -! registered - state of VOL class registration +! registered - state of VOL class registration ! hdferr - Returns 0 if successful and -1 if fails ! SOURCE @@ -156,7 +156,7 @@ CONTAINS CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name END FUNCTION H5VLis_connector_registered_by_name END INTERFACE - + c_name = TRIM(name)//C_NULL_CHAR registered_c = H5VLis_connector_registered_by_name(c_name) @@ -180,7 +180,7 @@ CONTAINS ! INPUTS ! value - Connector value ! OUTPUTS -! registered - state of VOL class registration +! registered - state of VOL class registration ! hdferr - Returns 0 if successful and -1 if fails ! SOURCE @@ -278,10 +278,10 @@ CONTAINS CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name END FUNCTION H5VLget_connector_id_by_name END INTERFACE - + c_name = TRIM(name)//C_NULL_CHAR vol_id = H5VLget_connector_id_by_name(c_name) - + hdferr = 0 IF(vol_id.LT.0)THEN hdferr = -1 @@ -367,7 +367,7 @@ CONTAINS END SUBROUTINE H5VLget_connector_name_f -! +! ! !****s* H5VL/H5VLclose_f ! diff --git a/fortran/src/H5Zff.F90 b/fortran/src/H5Zff.F90 index 848f047..6bd7b45 100644 --- a/fortran/src/H5Zff.F90 +++ b/fortran/src/H5Zff.F90 @@ -56,7 +56,7 @@ CONTAINS ! H5Z_FILTER_SCALEOFFSET_F ! H5Z_FILTER_SHUFFLE_F ! H5Z_FILTER_FLETCHER32_F -! +! ! OUTPUTS ! hdferr - Error code ! Success: 0 @@ -147,7 +147,7 @@ CONTAINS ! H5Z_FILTER_SHUFFLE_F ! H5Z_FILTER_FLETCHER32_Ffilter ! OUTPUTS -! config_flags - Flag, indicates if filter has its encoder +! config_flags - Flag, indicates if filter has its encoder ! and/or decoder available, possibly containing the ! following values: ! H5Z_FILTER_ENCODE_ENABLED_F diff --git a/fortran/src/H5_buildiface.F90 b/fortran/src/H5_buildiface.F90 index be53806..e81e1c0 100644 --- a/fortran/src/H5_buildiface.F90 +++ b/fortran/src/H5_buildiface.F90 @@ -13,8 +13,8 @@ ! depending on which of the KIND values are found. ! ! NOTES -! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF -! depending on availablity.It generates code that makes use of +! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF +! depending on availablity.It generates code that makes use of ! STORAGE_SIZE/SIZEOF in H5_gen.F90. STORAGE_SIZE is standard ! compliant and should always be chosen over SIZEOF. ! @@ -98,7 +98,7 @@ PROGRAM H5_buildiface ! ! DEVELOPER'S NOTES: ! -! Only interfaces with arrays of rank 7 and less are provided. Even-though, the F2008 +! Only interfaces with arrays of rank 7 and less are provided. Even-though, the F2008 ! standard extended the maximum rank to 15, it was decided that user's should use the ! new APIs to handle those use cases. Handling rank 7 and less is for backward compatibility ! with the Fortran 90/95 APIs codes which could never handle ranks greater than 7. @@ -195,7 +195,7 @@ PROGRAM H5_buildiface DO k = 1, 8 WRITE(11,'(2X,A)') "PRIVATE h5dwrite_ikind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) ENDDO - END DO + END DO DO k = 2, 8 WRITE(11,'(2X,A)') "PRIVATE h5dwrite_ckind_rank"//chr_rank(k) END DO @@ -211,7 +211,7 @@ PROGRAM H5_buildiface WRITE(chr2,'(I2)') j DO k = 1, 8 WRITE(11,'(2X,A)') "PRIVATE h5dread_ikind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) - ENDDO + ENDDO END DO DO k = 2, 8 WRITE(11,'(2X,A)') "PRIVATE h5dread_ckind_rank"//chr_rank(k) @@ -313,7 +313,7 @@ PROGRAM H5_buildiface DO k = 1, 8 WRITE(11,'(5X,A)') "MODULE PROCEDURE h5dwrite_ikind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) ENDDO - END DO + END DO DO k = 2, 8 WRITE(11,'(5X,A)') "MODULE PROCEDURE h5dwrite_ckind_rank"//chr_rank(k) END DO @@ -333,7 +333,7 @@ PROGRAM H5_buildiface WRITE(chr2,'(I2)') j DO k = 1, 8 WRITE(11,'(5X,A)') "MODULE PROCEDURE h5dread_ikind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) - ENDDO + ENDDO END DO DO k = 2, 8 WRITE(11,'(5X,A)') "MODULE PROCEDURE h5dread_ckind_rank"//chr_rank(k) @@ -448,7 +448,7 @@ PROGRAM H5_buildiface ! up to 7 dimensions. ! ! Fortran90 Interface: -!! SUBROUTINE H5Awrite_f(attr_id, memtype_id, buf, dims, hdferr) +!! SUBROUTINE H5Awrite_f(attr_id, memtype_id, buf, dims, hdferr) !! INTEGER(HID_T) , INTENT(IN) :: attr_id !! INTEGER(HID_T) , INTENT(IN) :: memtype_id !! TYPE , INTENT(IN) :: buf @@ -476,7 +476,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' hdferr = H5Awrite_f_c(attr_id, memtype_id, f_ptr)' WRITE(11,'(A)') ' END SUBROUTINE h5awrite_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) @@ -502,7 +502,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' hdferr = H5Awrite_f_c(attr_id, memtype_id, f_ptr)' WRITE(11,'(A)') ' END SUBROUTINE h5awrite_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) @@ -524,7 +524,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' CHARACTER(LEN=*) , INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') fchr_ptr_line(j) WRITE(11,'(A)') ' hdferr = H5Awrite_f_c(attr_id, memtype_id, f_ptr)' WRITE(11,'(A)') ' END SUBROUTINE h5awrite_ckind_rank'//chr_rank(j) @@ -574,7 +574,7 @@ PROGRAM H5_buildiface ! REAL, REAL(KIND=C_DOUBLE) and CHARACTER buffers ! up to 7 dimensions. ! Fortran90 Interface: -!! SUBROUTINE H5Aread_f(attr_id, memtype_id, buf, dims, hdferr) +!! SUBROUTINE H5Aread_f(attr_id, memtype_id, buf, dims, hdferr) !! INTEGER(HID_T) , INTENT(IN) :: attr_id !! INTEGER(HID_T) , INTENT(IN) :: memtype_id !! TYPE , INTENT(INOUT) :: buf @@ -599,7 +599,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' hdferr = H5Aread_f_c(attr_id, memtype_id, f_ptr)' WRITE(11,'(A)') ' END SUBROUTINE h5aread_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) @@ -623,7 +623,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' hdferr = H5Aread_f_c(attr_id, memtype_id, f_ptr)' WRITE(11,'(A)') ' END SUBROUTINE h5aread_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) @@ -643,7 +643,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') fchr_ptr_line(j) WRITE(11,'(A)') ' hdferr = H5Aread_f_c(attr_id, memtype_id, f_ptr)' WRITE(11,'(A)') ' END SUBROUTINE h5aread_ckind_rank'//chr_rank(j) @@ -656,7 +656,7 @@ PROGRAM H5_buildiface ! h5dread_f ! -! NAME +! NAME ! h5dread_f ! ! PURPOSE @@ -683,7 +683,7 @@ PROGRAM H5_buildiface ! Elena Pourmal ! August 12, 1999 ! -! HISTORY +! HISTORY ! Explicit Fortran interfaces were added for ! called C functions (it is needed for Windows ! port). February 28, 2001 @@ -693,7 +693,7 @@ PROGRAM H5_buildiface ! the h5dwrite_reference_obj and h5dwrite_reference_dsetreg ! functions. April 2, 2001 ! -! NOTES +! NOTES ! This function is overloaded to read INTEGER, ! REAL, DOUBLE PRECISION and CHARACTER buffers ! up to 7 dimensions, and one dimensional buffers @@ -886,7 +886,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' file_space_id_default, xfer_prp_default, f_ptr)' WRITE(11,'(A)') ' END SUBROUTINE h5dwrite_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) ENDDO - ENDDO + ENDDO DO j = 2, 8 ! DLL definitions for windows WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' @@ -938,7 +938,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' IMPLICIT NONE' WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: prp_id' WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: type_id' - WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(IN), TARGET :: fillvalue' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(IN), TARGET :: fillvalue' WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr ' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr ' WRITE(11,'(A)') ' f_ptr = C_LOC(fillvalue)' @@ -989,7 +989,7 @@ PROGRAM H5_buildiface WRITE(11,'(A)') ' f_ptr = C_LOC(value)' WRITE(11,'(A)') ' name_len = LEN(name)' WRITE(11,'(A)') ' hdferr = h5pget_c(prp_id, name, name_len, f_ptr)' - + WRITE(11,'(A)') ' END SUBROUTINE h5pset_kind_'//TRIM(ADJUSTL(chr2)) ENDDO diff --git a/fortran/src/H5_ff.F90 b/fortran/src/H5_ff.F90 index 7c7c751..2c32277 100644 --- a/fortran/src/H5_ff.F90 +++ b/fortran/src/H5_ff.F90 @@ -53,7 +53,7 @@ MODULE H5LIB ! INTEGER, PARAMETER :: H5generic_FLAGS_LEN = 9 INTEGER, DIMENSION(1:H5generic_FLAGS_LEN) :: H5generic_flags - + INTEGER, PARAMETER :: H5generic_haddr_FLAGS_LEN = 1 INTEGER(HADDR_T), DIMENSION(1:H5generic_haddr_FLAGS_LEN) :: H5generic_haddr_flags ! @@ -81,7 +81,7 @@ MODULE H5LIB INTEGER, PARAMETER :: H5FD_FLAGS_LEN = 11 INTEGER, DIMENSION(1:H5FD_FLAGS_LEN) :: H5FD_flags ! - ! H5FD file drivers flags declaration + ! H5FD file drivers flags declaration ! INTEGER, PARAMETER :: H5FD_HID_FLAGS_LEN = 7 INTEGER(HID_T), DIMENSION(1:H5FD_HID_FLAGS_LEN) :: H5FD_hid_flags @@ -170,7 +170,7 @@ CONTAINS ! October 13, 2011 ! Fortran90 Interface: SUBROUTINE h5open_f(error) - USE H5F, ONLY : h5fget_obj_count_f, H5OPEN_NUM_OBJ + USE H5F, ONLY : h5fget_obj_count_f, H5OPEN_NUM_OBJ IMPLICIT NONE INTEGER, INTENT(OUT) :: error INTEGER(SIZE_T) :: H5OPEN_NUM_OBJ_LOC = 0 @@ -249,13 +249,13 @@ CONTAINS END FUNCTION h5init1_flags_c END INTERFACE - + error = h5init_types_c(predef_types, floating_types, integer_types) - H5T_NATIVE_INTEGER_KIND(1:5) = predef_types(1:5) + H5T_NATIVE_INTEGER_KIND(1:5) = predef_types(1:5) H5T_NATIVE_INTEGER = predef_types(6) H5T_NATIVE_REAL = predef_types(7) - H5T_NATIVE_DOUBLE = predef_types(8) + H5T_NATIVE_DOUBLE = predef_types(8) H5T_NATIVE_CHARACTER = predef_types(9) H5T_STD_REF_OBJ = predef_types(10) H5T_STD_REF_DSETREG = predef_types(11) @@ -267,12 +267,12 @@ CONTAINS H5T_NATIVE_B32 = predef_types(17) H5T_NATIVE_B64 = predef_types(18) H5T_NATIVE_FLOAT_128 = predef_types(19) - + H5T_IEEE_F32BE = floating_types(1) H5T_IEEE_F32LE = floating_types(2) H5T_IEEE_F64BE = floating_types(3) - H5T_IEEE_F64LE = floating_types(4) - + H5T_IEEE_F64LE = floating_types(4) + H5T_STD_I8BE = integer_types(1) H5T_STD_I8LE = integer_types(2) H5T_STD_I16BE = integer_types(3) @@ -362,12 +362,12 @@ CONTAINS H5_ITER_DEC_F = H5generic_flags(7) H5_ITER_NATIVE_F = H5generic_flags(8) H5_ITER_N_F = H5generic_flags(9) - + HADDR_UNDEF_F = H5generic_haddr_flags(1) ! ! H5G flags ! - H5G_UNKNOWN_F = H5G_flags(1) + H5G_UNKNOWN_F = H5G_flags(1) H5G_GROUP_F = H5G_flags(2) H5G_DATASET_F = H5G_flags(3) H5G_TYPE_F = H5G_flags(4) @@ -411,7 +411,7 @@ CONTAINS H5D_VDS_FIRST_MISSING_F = H5D_flags(27) H5D_VDS_LAST_AVAILABLE_F = H5D_flags(28) H5D_VIRTUAL_F = H5D_flags(29) - + H5D_CHUNK_CACHE_NSLOTS_DFLT_F = H5D_size_flags(1) H5D_CHUNK_CACHE_NBYTES_DFLT_F = H5D_size_flags(2) ! @@ -420,7 +420,7 @@ CONTAINS H5E_DEFAULT_F = H5E_hid_flags(1) H5E_MAJOR_F = H5E_flags(1) - H5E_MINOR_F = H5E_flags(2) + H5E_MINOR_F = H5E_flags(2) H5E_WALK_UPWARD_F = H5E_flags(3) H5E_WALK_DOWNWARD_F = H5E_flags(4) ! @@ -439,7 +439,7 @@ CONTAINS H5FD_MEM_NTYPES_F = H5FD_flags(11) ! ! H5FD file driver flags - ! + ! H5FD_CORE_F = H5FD_hid_flags(1) H5FD_FAMILY_F = H5FD_hid_flags(2) H5FD_LOG_F = H5FD_hid_flags(3) @@ -469,7 +469,7 @@ CONTAINS H5I_INVALID_HID_F = H5I_flags(17) ! ! H5L flags - ! + ! H5L_TYPE_ERROR_F = H5L_flags(1) H5L_TYPE_HARD_F = H5L_flags(2) H5L_TYPE_SOFT_F = H5L_flags(3) @@ -486,25 +486,25 @@ CONTAINS H5O_COPY_WITHOUT_ATTR_FLAG_F = h5o_flags(5) H5O_COPY_PRESERVE_NULL_FLAG_F = h5o_flags(6) H5O_COPY_ALL_F = h5o_flags(7) - H5O_SHMESG_NONE_FLAG_F = h5o_flags(8) + H5O_SHMESG_NONE_FLAG_F = h5o_flags(8) H5O_SHMESG_SDSPACE_FLAG_F = h5o_flags(9) H5O_SHMESG_DTYPE_FLAG_F = h5o_flags(10) - H5O_SHMESG_FILL_FLAG_F = h5o_flags(11) - H5O_SHMESG_PLINE_FLAG_F = h5o_flags(12) - H5O_SHMESG_ATTR_FLAG_F = h5o_flags(13) - H5O_SHMESG_ALL_FLAG_F = h5o_flags(14) - H5O_HDR_CHUNK0_SIZE_F = h5o_flags(15) - H5O_HDR_ATTR_CRT_ORDER_TRACK_F = h5o_flags(16) - H5O_HDR_ATTR_CRT_ORDER_INDEX_F = h5o_flags(17) - H5O_HDR_ATTR_STORE_PHASE_CHA_F = h5o_flags(18) - H5O_HDR_STORE_TIMES_F = h5o_flags(19) + H5O_SHMESG_FILL_FLAG_F = h5o_flags(11) + H5O_SHMESG_PLINE_FLAG_F = h5o_flags(12) + H5O_SHMESG_ATTR_FLAG_F = h5o_flags(13) + H5O_SHMESG_ALL_FLAG_F = h5o_flags(14) + H5O_HDR_CHUNK0_SIZE_F = h5o_flags(15) + H5O_HDR_ATTR_CRT_ORDER_TRACK_F = h5o_flags(16) + H5O_HDR_ATTR_CRT_ORDER_INDEX_F = h5o_flags(17) + H5O_HDR_ATTR_STORE_PHASE_CHA_F = h5o_flags(18) + H5O_HDR_STORE_TIMES_F = h5o_flags(19) H5O_HDR_ALL_FLAGS_F = h5o_flags(20) - H5O_SHMESG_MAX_NINDEXES_F = h5o_flags(21) - H5O_SHMESG_MAX_LIST_SIZE_F = h5o_flags(22) - H5O_TYPE_UNKNOWN_F = h5o_flags(23) - H5O_TYPE_GROUP_F = h5o_flags(24) - H5O_TYPE_DATASET_F = h5o_flags(25) - H5O_TYPE_NAMED_DATATYPE_F = h5o_flags(26) + H5O_SHMESG_MAX_NINDEXES_F = h5o_flags(21) + H5O_SHMESG_MAX_LIST_SIZE_F = h5o_flags(22) + H5O_TYPE_UNKNOWN_F = h5o_flags(23) + H5O_TYPE_GROUP_F = h5o_flags(24) + H5O_TYPE_DATASET_F = h5o_flags(25) + H5O_TYPE_NAMED_DATATYPE_F = h5o_flags(26) H5O_TYPE_NTYPES_F = h5o_flags(27) H5O_INFO_ALL_F = h5o_flags(28) H5O_INFO_BASIC_F = h5o_flags(29) @@ -514,7 +514,7 @@ CONTAINS H5O_INFO_META_SIZE_F = h5o_flags(33) ! ! H5P flags - ! + ! H5P_FILE_CREATE_F = H5P_flags(1) H5P_FILE_ACCESS_F = H5P_flags(2) H5P_DATASET_CREATE_F = H5P_flags(3) @@ -535,21 +535,21 @@ CONTAINS H5P_LINK_ACCESS_F = H5P_flags(18) ! ! H5P integers flags - ! + ! H5P_CRT_ORDER_INDEXED_F = H5P_flags_int(1) H5P_CRT_ORDER_TRACKED_F = H5P_flags_int(2) ! ! H5R flags - ! + ! H5R_OBJECT_F = H5R_flags(1) H5R_DATASET_REGION_F = H5R_flags(2) ! ! H5S flags - ! + ! H5S_ALL_F = H5S_hid_flags(1) - + H5S_UNLIMITED_F = H5S_hsize_flags(1) - + H5S_SCALAR_F = H5S_flags(1) H5S_SIMPLE_F = H5S_flags(2) H5S_NULL_F = H5S_flags(3) @@ -570,7 +570,7 @@ CONTAINS H5S_SEL_ALL_F = H5S_flags(18) ! ! H5T flags declaration - ! + ! H5T_NO_CLASS_F = H5T_flags(1) H5T_INTEGER_F = H5T_flags(2) H5T_FLOAT_F = H5T_flags(3) diff --git a/fortran/src/H5f90global.F90 b/fortran/src/H5f90global.F90 index 46759cf..8cf601e 100644 --- a/fortran/src/H5f90global.F90 +++ b/fortran/src/H5f90global.F90 @@ -49,7 +49,7 @@ MODULE H5GLOBAL ENUMERATOR :: enum_dtype END ENUM INTEGER, PARAMETER :: ENUM_T = KIND(enum_dtype) - + ! Definitions for reference datatypes. ! If you change the value of these parameters, do not forget to change corresponding ! values in the H5f90.h file. @@ -87,7 +87,7 @@ MODULE H5GLOBAL INTEGER(HID_T), DIMENSION(1:PREDEF_TYPES_LEN) :: predef_types = -1 INTEGER(HID_T), DIMENSION(1:FLOATING_TYPES_LEN) :: floating_types = -1 INTEGER(HID_T), DIMENSION(1:INTEGER_TYPES_LEN) :: integer_types = -1 - + !DEC$if defined(BUILD_HDF5_DLL) !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_REAL_C_FLOAT !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_REAL_C_DOUBLE @@ -95,7 +95,7 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_INTEGER !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_REAL !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_DOUBLE - !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_CHARACTER + !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_CHARACTER !DEC$ATTRIBUTES DLLEXPORT :: H5T_STD_REF_OBJ !DEC$ATTRIBUTES DLLEXPORT :: H5T_STD_REF_DSETREG !DEC$ATTRIBUTES DLLEXPORT :: H5T_IEEE_F32BE @@ -136,14 +136,14 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_INTEGER_KIND !DEC$ATTRIBUTES DLLEXPORT :: H5T_NATIVE_FLOAT_128 !DEC$endif - + INTEGER(HID_T) :: H5T_NATIVE_REAL_C_FLOAT INTEGER(HID_T) :: H5T_NATIVE_REAL_C_DOUBLE INTEGER(HID_T) :: H5T_NATIVE_REAL_C_LONG_DOUBLE INTEGER(HID_T) :: H5T_NATIVE_INTEGER INTEGER(HID_T) :: H5T_NATIVE_REAL INTEGER(HID_T) :: H5T_NATIVE_DOUBLE - INTEGER(HID_T) :: H5T_NATIVE_CHARACTER + INTEGER(HID_T) :: H5T_NATIVE_CHARACTER INTEGER(HID_T) :: H5T_STD_REF_OBJ INTEGER(HID_T) :: H5T_STD_REF_DSETREG INTEGER(HID_T) :: H5T_IEEE_F32BE @@ -202,7 +202,7 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5_ITER_N_F !DEC$ATTRIBUTES DLLEXPORT :: HADDR_UNDEF_F !DEC$endif - + INTEGER :: H5_INDEX_UNKNOWN_F INTEGER :: H5_INDEX_NAME_F INTEGER :: H5_INDEX_CRT_ORDER_F @@ -244,7 +244,7 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5F_LIBVER_V112_F !DEC$ATTRIBUTES DLLEXPORT :: H5F_LIBVER_V114_F !DEC$endif - + INTEGER :: H5F_ACC_RDWR_F INTEGER :: H5F_ACC_RDONLY_F INTEGER :: H5F_ACC_TRUNC_F @@ -289,7 +289,7 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5G_STORAGE_TYPE_COMPACT_F !DEC$ATTRIBUTES DLLEXPORT :: H5G_STORAGE_TYPE_DENSE_F !DEC$endif - + INTEGER :: H5G_UNKNOWN_F INTEGER :: H5G_GROUP_F INTEGER :: H5G_DATASET_F @@ -340,7 +340,7 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5D_VDS_LAST_AVAILABLE_F !DEC$ATTRIBUTES DLLEXPORT :: H5D_VIRTUAL_F !DEC$endif - + INTEGER :: H5D_COMPACT_F INTEGER :: H5D_CONTIGUOUS_F INTEGER :: H5D_CHUNKED_F @@ -369,7 +369,7 @@ MODULE H5GLOBAL ! characters for variable names in Fortran. ! shortened "_CONTIGUOUS" to "_CONTIG" to satisfy the limit of 31 ! characters for variable names in Fortran. - + INTEGER(SIZE_T) :: H5D_CHUNK_CACHE_NSLOTS_DFLT_F INTEGER(SIZE_T) :: H5D_CHUNK_CACHE_NBYTES_DFLT_F @@ -493,7 +493,7 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5L_SAME_LOC_F !DEC$ATTRIBUTES DLLEXPORT :: H5L_LINK_CLASS_T_VERS_F !DEC$endif - + INTEGER :: H5L_TYPE_ERROR_F INTEGER :: H5L_TYPE_HARD_F INTEGER :: H5L_TYPE_SOFT_F @@ -539,7 +539,7 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5O_INFO_META_SIZE_F ! !DEC$endif - + INTEGER :: H5O_COPY_SHALLOW_HIERARCHY_F ! *** THESE VARIABLES DO INTEGER :: H5O_COPY_EXPAND_SOFT_LINK_F ! NOT MATCH THE C VARIABLE INTEGER :: H5O_COPY_EXPAND_EXT_LINK_F ! IN ORDER @@ -655,7 +655,7 @@ MODULE H5GLOBAL !DEC$ATTRIBUTES DLLEXPORT :: H5S_SEL_HYPERSLABS_F !DEC$ATTRIBUTES DLLEXPORT :: H5S_SEL_ALL_F !DEC$endif - + INTEGER(HSIZE_T) :: H5S_UNLIMITED_F INTEGER(HID_T) :: H5S_ALL_F @@ -831,11 +831,11 @@ CONTAINS f_len = LEN(f_string) ! CASE (1): C string is equal to or larger than Fortran character buffer, - ! so fill the entire Fortran buffer. + ! so fill the entire Fortran buffer. IF(c_len.GE.f_len)THEN ! f_string(1:f_len) = c_string(1:f_len) - ! CASE (2): C string is smaller than Fortran character buffer, + ! CASE (2): C string is smaller than Fortran character buffer, ! so copy C string and blank pad remaining characters. ELSE f_string(1:c_len) = c_string(1:c_len) @@ -902,6 +902,6 @@ CONTAINS !!$ fstring(j:j) = ' ' !!$ end do !!$end subroutine MPIR_Fortran_string_c2f - + END MODULE H5GLOBAL diff --git a/fortran/src/H5fortkit.F90 b/fortran/src/H5fortkit.F90 index f5eba8a..7710a4d 100644 --- a/fortran/src/H5fortkit.F90 +++ b/fortran/src/H5fortkit.F90 @@ -51,8 +51,8 @@ CONTAINS INTEGER :: i INTEGER :: len CHARACTER(LEN=len) :: fstring - CHARACTER(LEN=1), DIMENSION(1:len) :: cstring - + CHARACTER(LEN=1), DIMENSION(1:len) :: cstring + fstring = '' DO i = 1, len IF (cstring(i)(1:1)==CHAR(0)) EXIT diff --git a/fortran/test/H5_test_buildiface.F90 b/fortran/test/H5_test_buildiface.F90 index 636ded4..6cbeb68 100644 --- a/fortran/test/H5_test_buildiface.F90 +++ b/fortran/test/H5_test_buildiface.F90 @@ -13,8 +13,8 @@ ! depending on which of the KIND values are found. ! ! NOTES -! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF -! depending on availablity.It generates code that makes use of +! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF +! depending on availablity.It generates code that makes use of ! STORAGE_SIZE/SIZEOF in H5fortran_detect.f90. STORAGE_SIZE is standard ! compliant and should always be chosen over SIZEOF. ! @@ -94,7 +94,7 @@ PROGRAM H5_test_buildiface WRITE(11,'(a)') "MODULE TH5_MISC_gen" WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' - + ! Interfaces for validating REALs, INTEGERs, CHARACTERs, LOGICALs WRITE(11,'(A)') ' INTERFACE verify' @@ -156,8 +156,8 @@ PROGRAM H5_test_buildiface WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_TEST_DLL)' WRITE(11,'(A)') '!DEC$attributes dllexport :: verify_real_kind_'//TRIM(ADJUSTL(chr2)) WRITE(11,'(A)') '!DEC$endif' - -! Subroutine API + +! Subroutine API WRITE(11,'(A)') ' SUBROUTINE verify_real_kind_'//TRIM(ADJUSTL(chr2))//'(string,value,correct_value,total_error)' WRITE(11,'(A)') ' IMPLICIT NONE' WRITE(11,'(A)') ' CHARACTER(LEN=*) :: string' @@ -186,7 +186,7 @@ PROGRAM H5_test_buildiface ! { EXPONENT(x)-DIGITS(x) ! { 2.0 for x /= 0 ! SPACING(x) = { -! { +! { ! { TINY(x) for x == 0 ! ! The ULP optional argument scales the comparison: @@ -228,7 +228,7 @@ PROGRAM H5_test_buildiface WRITE(11,'(A)') '!DEC$attributes dllexport :: verify_character' WRITE(11,'(A)') '!DEC$endif' -! Subroutine API +! Subroutine API WRITE(11,'(A)') ' SUBROUTINE verify_character(string,value,correct_value,total_error)' WRITE(11,'(A)') ' IMPLICIT NONE' WRITE(11,'(A)') ' CHARACTER*(*) :: string' @@ -258,7 +258,7 @@ PROGRAM H5_test_buildiface WRITE(11,'(A)') ' total_error = total_error + 1' WRITE(11,'(A)') ' WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string' WRITE(11,'(A)') ' ENDIF' - + WRITE(11,'(A)') ' END SUBROUTINE verify_logical' WRITE(11,'(A)') "END MODULE TH5_MISC_gen" diff --git a/fortran/test/fflush1.F90 b/fortran/test/fflush1.F90 index bd1f551..0916813 100644 --- a/fortran/test/fflush1.F90 +++ b/fortran/test/fflush1.F90 @@ -6,7 +6,7 @@ ! FUNCTION ! This is the first half of a two-part test that makes sure ! that a file can be read after an application crashes as long -! as the file was flushed first. We simulate by exit the +! as the file was flushed first. We simulate by exit the ! the program using stop statement ! ! COPYRIGHT diff --git a/fortran/test/fortranlib_test.F90 b/fortran/test/fortranlib_test.F90 index 8d5b32b..92f9279 100644 --- a/fortran/test/fortranlib_test.F90 +++ b/fortran/test/fortranlib_test.F90 @@ -81,7 +81,7 @@ PROGRAM fortranlibtest CALL file_space("file_space",cleanup, ret_total_error) CALL write_test_status(ret_total_error, ' File free space test', total_error) -! +! ! '=========================================' ! 'Testing DATASET Interface ' ! '=========================================' @@ -97,7 +97,7 @@ PROGRAM fortranlibtest CALL test_userblock_offset(cleanup, ret_total_error) CALL write_test_status(ret_total_error, ' Dataset offset with user block', total_error) -! +! ! '=========================================' ! 'Testing DATASPACE Interface ' ! '=========================================' @@ -106,7 +106,7 @@ PROGRAM fortranlibtest CALL dataspace_basic_test(cleanup, ret_total_error) CALL write_test_status(ret_total_error, ' Basic dataspace test', total_error) -! +! ! '=========================================' ! 'Testing REFERENCE Interface ' ! '=========================================' @@ -119,7 +119,7 @@ PROGRAM fortranlibtest CALL refregtest(cleanup, ret_total_error) CALL write_test_status(ret_total_error, ' Reference to dataset region test', total_error) -! +! ! '=========================================' ! 'Testing selection functionalities ' ! '=========================================' @@ -148,8 +148,8 @@ PROGRAM fortranlibtest ret_total_error = 0 CALL test_select_bounds(ret_total_error) CALL write_test_status(ret_total_error, ' Selection bounds test ', total_error) - -! + +! ! '=========================================' ! 'Testing DATATYPE interface ' ! '=========================================' @@ -169,7 +169,7 @@ PROGRAM fortranlibtest CALL test_derived_flt(cleanup, ret_total_error) CALL write_test_status(ret_total_error, ' Derived float datatype test', total_error) -! +! ! '=========================================' ! 'Testing PROPERTY interface ' ! '=========================================' @@ -186,7 +186,7 @@ PROGRAM fortranlibtest CALL test_chunk_cache (cleanup, ret_total_error) CALL write_test_status(ret_total_error, ' Dataset chunk cache configuration', total_error) -! +! ! '=========================================' ! 'Testing ATTRIBUTE interface ' ! '=========================================' @@ -195,7 +195,7 @@ PROGRAM fortranlibtest CALL attribute_test(cleanup, ret_total_error) CALL write_test_status(ret_total_error, ' Attribute test', total_error) -! +! ! '=========================================' ! 'Testing IDENTIFIER interface ' ! '=========================================' @@ -217,7 +217,7 @@ PROGRAM fortranlibtest CALL write_test_status(ret_total_error, ' SZIP filter test', total_error) ENDIF -! +! ! '=========================================' ! 'Testing GROUP interface ' ! '=========================================' diff --git a/fortran/test/fortranlib_test_F03.F90 b/fortran/test/fortranlib_test_F03.F90 index 808cb4d..377645d 100644 --- a/fortran/test/fortranlib_test_F03.F90 +++ b/fortran/test/fortranlib_test_F03.F90 @@ -24,7 +24,7 @@ !***** PROGRAM fortranlibtest_F03 - + USE HDF5 USE THDF5_F03 @@ -48,7 +48,7 @@ PROGRAM fortranlibtest_F03 IF(total_error .EQ. 0) THEN WRITE(*, '(" FORTRANLIB_TEST is linked with HDF5 Library version ")', advance="NO") WRITE(*, '(I0)', advance="NO") majnum - WRITE(*, '(".")', advance="NO") + WRITE(*, '(".")', advance="NO") WRITE(*, '(I0)', advance="NO") minnum WRITE(*, '(" release ")', advance="NO") WRITE(*, '(I0)') relnum @@ -77,11 +77,11 @@ PROGRAM fortranlibtest_F03 ret_total_error = 0 CALL t_enum(ret_total_error) - CALL write_test_status(ret_total_error, ' Testing writing/reading enum dataset, using C_LOC', total_error) + CALL write_test_status(ret_total_error, ' Testing writing/reading enum dataset, using C_LOC', total_error) ret_total_error = 0 CALL t_enum_conv(ret_total_error) - CALL write_test_status(ret_total_error, ' Testing enumeration conversions', total_error) + CALL write_test_status(ret_total_error, ' Testing enumeration conversions', total_error) ret_total_error = 0 CALL t_bit(ret_total_error) @@ -89,7 +89,7 @@ PROGRAM fortranlibtest_F03 ret_total_error = 0 CALL t_opaque(ret_total_error) - CALL write_test_status(ret_total_error, ' Testing writing/reading opaque datatypes, using C_LOC', total_error) + CALL write_test_status(ret_total_error, ' Testing writing/reading opaque datatypes, using C_LOC', total_error) ret_total_error = 0 CALL t_objref(ret_total_error) @@ -97,7 +97,7 @@ PROGRAM fortranlibtest_F03 ret_total_error = 0 CALL t_regref(ret_total_error) - CALL write_test_status(ret_total_error, ' Testing writing/reading region references, using C_LOC', total_error) + CALL write_test_status(ret_total_error, ' Testing writing/reading region references, using C_LOC', total_error) ret_total_error = 0 CALL t_vlen(ret_total_error) @@ -150,7 +150,7 @@ PROGRAM fortranlibtest_F03 ret_total_error = 0 CALL test_h5p_file_image(ret_total_error) CALL write_test_status(ret_total_error, ' Testing h5pset/get file image', total_error) - + ! write(*,*) ! write(*,*) '=========================================' ! write(*,*) 'Testing OBJECT interface ' @@ -188,7 +188,7 @@ PROGRAM fortranlibtest_F03 WRITE(*, fmt = '(i4)', advance='NO') total_error WRITE(*, fmt = '(12a)' ) ' error(s) ! ' WRITE(*,*) ' ============================================ ' - + CALL h5close_f(error) ! if errors detected, exit with non-zero code. diff --git a/fortran/test/tH5A.F90 b/fortran/test/tH5A.F90 index 1e6fdeb..8968f59 100644 --- a/fortran/test/tH5A.F90 +++ b/fortran/test/tH5A.F90 @@ -21,7 +21,7 @@ ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ! ! CONTAINS SUBROUTINES -! attribute_test +! attribute_test ! ! !***** diff --git a/fortran/test/tH5A_1_8.F90 b/fortran/test/tH5A_1_8.F90 index f2f11aa..8e59483 100644 --- a/fortran/test/tH5A_1_8.F90 +++ b/fortran/test/tH5A_1_8.F90 @@ -25,7 +25,7 @@ ! test_attr_create_by_name, test_attr_info_by_idx, attr_info_by_idx_check, ! test_attr_shared_rename, test_attr_delete_by_idx, test_attr_shared_delete, ! test_attr_dense_open, test_attr_dense_verify, test_attr_corder_create_basic, -! test_attr_basic_write, test_attr_many, attr_open_check, +! test_attr_basic_write, test_attr_many, attr_open_check, ! !***** MODULE TH5A_1_8 @@ -157,7 +157,7 @@ SUBROUTINE attribute_test_1_8(cleanup, total_error) ' - Testing creating attributes by name', & total_error) - ! More complex tests with both "new format" and "shared" attributes + ! More complex tests with both "new format" and "shared" attributes IF( use_shared(j) ) THEN ret_total_error = 0 CALL test_attr_shared_rename(my_fcpl, my_fapl, ret_total_error) @@ -243,17 +243,17 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) data_dims = 0 ! WRITE(*,*) " - Testing Compact Storage of Attributes with Creation Order Info" - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Create dataset creation property list + ! Create dataset creation property list CALL H5Pcreate_f(H5P_DATASET_CREATE_F,dcpl,error) CALL check("h5Pcreate_f",error,total_error) CALL H5Pset_attr_creation_order_f(dcpl, IOR(H5P_CRT_ORDER_TRACKED_F, H5P_CRT_ORDER_INDEXED_F), error) CALL check("H5Pset_attr_creation_order",error,total_error) - ! Query the attribute creation properties + ! Query the attribute creation properties CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f",error,total_error) @@ -279,7 +279,7 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) my_dataset = dset3 END SELECT DO u = 0, max_compact - 1 - ! Create attribute + ! Create attribute WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 @@ -296,7 +296,7 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) END DO END DO - ! Close Datasets + ! Close Datasets CALL h5dclose_f(dset1, error) CALL check("h5dclose_f",error,total_error) CALL h5dclose_f(dset2, error) @@ -304,15 +304,15 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) CALL h5dclose_f(dset3, error) CALL check("h5dclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Close dataspace + ! Close dataspace CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) - ! Close property list + ! Close property list CALL h5pclose_f(dcpl, error) CALL check("h5pclose_f",error,total_error) @@ -339,34 +339,34 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) DO u = 0,max_compact-1 WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 - ! Retrieve information for attribute + ! Retrieve information for attribute CALL H5Aget_info_by_name_f(my_dataset, ".", attrname, & f_corder_valid, corder, cset, data_size, error, lapl_id = H5P_DEFAULT_F ) !with optional CALL check("H5Aget_info_by_name_f", error, total_error) - ! Verify creation order of attribute + ! Verify creation order of attribute CALL verify("H5Aget_info_by_name_f", f_corder_valid, .TRUE., total_error) CALL verify("H5Aget_info_by_name_f", corder, u, total_error) - ! Retrieve information for attribute + ! Retrieve information for attribute CALL H5Aget_info_by_name_f(my_dataset, ".", attrname, & f_corder_valid, corder, cset, data_size, error) ! without optional CALL check("H5Aget_info_by_name_f", error, total_error) - ! Verify creation order of attribute + ! Verify creation order of attribute CALL verify("H5Aget_info_by_name_f", f_corder_valid, .TRUE., total_error) CALL verify("H5Aget_info_by_name_f", corder, u, total_error) END DO END DO - ! Close Datasets + ! Close Datasets CALL h5dclose_f(dset1, error) CALL check("h5dclose_f",error,total_error) CALL h5dclose_f(dset2, error) @@ -374,7 +374,7 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) CALL h5dclose_f(dset3, error) CALL check("h5dclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) @@ -423,33 +423,33 @@ SUBROUTINE test_attr_null_space(fcpl, fapl, total_error) data_dims = 0 - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Re-open file + ! Re-open file CALL h5fopen_f(FileName, H5F_ACC_RDWR_F, fid, error) CALL check("h5open_f",error,total_error) - ! Create dataspace for dataset attributes + ! Create dataspace for dataset attributes CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Create "null" dataspace for attribute + ! Create "null" dataspace for attribute CALL h5screate_f(H5S_NULL_F, null_sid, error) CALL check("h5screate_f",error,total_error) - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(fid, DSET1_NAME, H5T_NATIVE_CHARACTER, sid, dataset, error) CALL check("h5dcreate_f",error,total_error) - ! Add attribute with 'null' dataspace + ! Add attribute with 'null' dataspace - ! Create attribute + ! Create attribute CALL h5acreate_f(dataset, "null attr", H5T_NATIVE_INTEGER, null_sid, attr, error) CALL check("h5acreate_f",error,total_error) - ! Try to read data from the attribute - ! (shouldn't fail, but should leave buffer alone) + ! Try to read data from the attribute + ! (shouldn't fail, but should leave buffer alone) value(1) = 103 data_dims(1) = 1 CALL h5aread_f(attr, H5T_NATIVE_INTEGER, value, data_dims, error) @@ -457,7 +457,7 @@ SUBROUTINE test_attr_null_space(fcpl, fapl, total_error) CALL verify("h5aread_f",value(1),103,total_error) ! Try to read data from the attribute again but -! for a scalar +! for a scalar value_scalar = 104 data_dims(1) = 1 @@ -479,7 +479,7 @@ SUBROUTINE test_attr_null_space(fcpl, fapl, total_error) CALL h5aget_info_f(attr, f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_f", error, total_error) - ! Check the attribute's information + ! Check the attribute's information CALL verify("h5aget_info_f.corder",corder,0,total_error) CALL verify("h5aget_info_f.cset", cset, H5T_CSET_ASCII_F, total_error) @@ -557,32 +557,32 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) data_dims = 0 - ! Create dataspace for dataset & attributes + ! Create dataspace for dataset & attributes CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Create dataset creation property list + ! Create dataset creation property list CALL H5Pcreate_f(H5P_DATASET_CREATE_F,dcpl,error) CALL check("h5Pcreate_f",error,total_error) - ! Query the attribute creation properties + ! Query the attribute creation properties CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f",error,total_error) - ! Loop over using index for creation order value + ! Loop over using index for creation order value DO i = 1, 2 - ! Print appropriate test message + ! Print appropriate test message IF(use_index(i))THEN WRITE(*,*) " - Testing Creating Attributes By Name w/Creation Order Index" ELSE WRITE(*,*) " - Testing Creating Attributes By Name w/o Creation Order Index" ENDIF - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Set attribute creation order tracking & indexing for object + ! Set attribute creation order tracking & indexing for object IF(new_format)THEN IF(use_index(i))THEN @@ -596,7 +596,7 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) ENDIF - ! Create datasets + ! Create datasets CALL h5dcreate_f(fid, DSET1_NAME, H5T_NATIVE_CHARACTER, sid, dset1, error, dcpl_id=dcpl ) CALL check("h5dcreate_f2",error,total_error) @@ -608,7 +608,7 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) CALL check("h5dcreate_f4",error,total_error) - ! Work on all the datasets + ! Work on all the datasets DO curr_dset = 0,NUM_DSETS-1 SELECT CASE (curr_dset) @@ -626,39 +626,39 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) END SELECT - ! Create attributes, up to limit of compact form + ! Create attributes, up to limit of compact form DO u = 0, max_compact - 1 - ! Create attribute + ! Create attribute WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 CALL H5Acreate_by_name_f(fid, dsetname, attrname, H5T_NATIVE_INTEGER, sid, & attr, error, lapl_id=H5P_DEFAULT_F, acpl_id=H5P_DEFAULT_F, aapl_id=H5P_DEFAULT_F) CALL check("H5Acreate_by_name_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute data_dims(1) = 1 CALL h5awrite_f(attr, H5T_NATIVE_INTEGER, u, data_dims, error) CALL check("h5awrite_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Verify information for NEW attribute + ! Verify information for NEW attribute CALL attr_info_by_idx_check(my_dataset, attrname, INT(u,HSIZE_T), use_index(i), total_error) ! CALL check("FAILED IN attr_info_by_idx_check",total_error) ENDDO - ! Test opening attributes stored compactly + ! Test opening attributes stored compactly CALL attr_open_check(fid, dsetname, my_dataset, u, total_error) ENDDO - ! Work on all the datasets + ! Work on all the datasets DO curr_dset = 0,NUM_DSETS-1 SELECT CASE (curr_dset) CASE (0) @@ -672,7 +672,7 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) dsetname = DSET3_NAME END SELECT - ! Create more attributes, to push into dense form + ! Create more attributes, to push into dense form DO u = max_compact, max_compact* 2 - 1 WRITE(chr2,'(I2.2)') u @@ -682,12 +682,12 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) attr, error, lapl_id=H5P_DEFAULT_F) CALL check("H5Acreate_by_name",error,total_error) - ! Write data into the attribute + ! Write data into the attribute data_dims(1) = 1 CALL h5awrite_f(attr, H5T_NATIVE_INTEGER, u, data_dims, error) CALL check("h5awrite_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) @@ -695,7 +695,7 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) ENDDO - ! Close Datasets + ! Close Datasets CALL h5dclose_f(dset1, error) CALL check("h5dclose_f",error,total_error) CALL h5dclose_f(dset2, error) @@ -704,16 +704,16 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) CALL check("h5dclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) ENDDO - ! Close property list + ! Close property list CALL h5pclose_f(dcpl, error) CALL check("h5pclose_f",error,total_error) - ! Close dataspace + ! Close dataspace CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) @@ -781,31 +781,31 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) data_dims = 0 - ! Create dataspace for dataset & attributes + ! Create dataspace for dataset & attributes CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Create dataset creation property list + ! Create dataset creation property list CALL H5Pcreate_f(H5P_DATASET_CREATE_F,dcpl,error) CALL check("h5Pcreate_f",error,total_error) - ! Query the attribute creation properties + ! Query the attribute creation properties CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f",error,total_error) - ! Loop over using index for creation order value + ! Loop over using index for creation order value DO i = 1, 2 - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Set attribute creation order tracking & indexing for object + ! Set attribute creation order tracking & indexing for object IF(new_format)THEN IF(use_index(i))THEN Input1 = H5P_CRT_ORDER_INDEXED_F @@ -816,7 +816,7 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) CALL check("H5Pset_attr_creation_order",error,total_error) ENDIF - ! Create datasets + ! Create datasets CALL h5dcreate_f(fid, DSET1_NAME, H5T_NATIVE_CHARACTER, sid, dset1, error ) CALL check("h5dcreate_f",error,total_error) @@ -827,7 +827,7 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) CALL h5dcreate_f(fid, DSET3_NAME, H5T_NATIVE_CHARACTER, sid, dset3, error ) CALL check("h5dcreate_f",error,total_error) - ! Work on all the datasets + ! Work on all the datasets DO curr_dset = 0,NUM_DSETS-1 @@ -840,7 +840,7 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) my_dataset = dset3 END SELECT - ! Check for query on non-existant attribute + ! Check for query on non-existant attribute n = 0 @@ -870,10 +870,10 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) CALL verify("h5aget_name_by_idx_f",error,minusone,total_error) - ! Create attributes, up to limit of compact form + ! Create attributes, up to limit of compact form DO j = 0, max_compact-1 - ! Create attribute + ! Create attribute WRITE(chr2,'(I2.2)') j attrname = 'attr '//chr2 @@ -881,19 +881,19 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) CALL h5acreate_f(my_dataset, attrname, H5T_NATIVE_INTEGER, sid, attr, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute attr_integer_data(1) = j data_dims(1) = 1 CALL h5awrite_f(attr, H5T_NATIVE_INTEGER, attr_integer_data, data_dims, error) CALL check("h5awrite_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Verify information for new attribute + ! Verify information for new attribute !EP CALL attr_info_by_idx_check(my_dataset, attrname, INT(j,HSIZE_T), use_index(i), total_error ) htmp = j @@ -905,7 +905,7 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) ENDDO - ! Close Datasets + ! Close Datasets CALL h5dclose_f(dset1, error) CALL check("h5dclose_f",error,total_error) CALL h5dclose_f(dset2, error) @@ -913,17 +913,17 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) CALL h5dclose_f(dset3, error) CALL check("h5dclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) END DO - ! Close property list + ! Close property list CALL h5pclose_f(dcpl,error) CALL check("h5pclose_f", error, total_error) - ! Close dataspace + ! Close dataspace CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) @@ -950,13 +950,13 @@ SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) INTEGER(HSIZE_T) :: hzero = 0_HSIZE_T - ! Verify the information for first attribute, in increasing creation order + ! Verify the information for first attribute, in increasing creation order CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, hzero, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) CALL verify("h5aget_info_by_idx_f",corder,0,total_error) - ! Verify the information for new attribute, in increasing creation order + ! Verify the information for new attribute, in increasing creation order CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, n, & f_corder_valid, corder, cset, data_size, error) @@ -964,7 +964,7 @@ SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) CALL check("h5aget_info_by_idx_f",error,total_error) CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) - ! Verify the name for new link, in increasing creation order + ! Verify the name for new link, in increasing creation order ! Try with the correct buffer size @@ -981,21 +981,21 @@ SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) ! Don't test "native" order if there is no creation order index, since ! * there's not a good way to easily predict the attribute's order in the name ! * index. - ! + ! IF (use_index) THEN - ! Verify the information for first attribute, in native creation order + ! Verify the information for first attribute, in native creation order CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_NATIVE_F, hzero, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) CALL verify("h5aget_info_by_idx_f",corder,0,total_error) - ! Verify the information for new attribute, in native creation order + ! Verify the information for new attribute, in native creation order CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_NATIVE_F, n, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) - ! Verify the name for new link, in increasing native order + ! Verify the name for new link, in increasing native order CALL h5aget_name_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_NATIVE_F, & n, tmpname, error) ! check with no optional parameters CALL check("h5aget_name_by_idx_f",error,total_error) @@ -1113,114 +1113,114 @@ SUBROUTINE test_attr_shared_rename( fcpl, fapl, total_error) INTEGER(HSIZE_T), DIMENSION(1) :: adims2 = (/1/) ! Attribute dimension INTEGER :: arank = 1 ! Attribure rank - ! Initialize "big" attribute data + ! Initialize "big" attribute data - ! Create dataspace for dataset + ! Create dataspace for dataset CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Create "big" dataspace for "large" attributes + ! Create "big" dataspace for "large" attributes CALL h5screate_simple_f(arank, adims2, big_sid, error) CALL check("h5screate_simple_f",error,total_error) - ! Loop over type of shared components + ! Loop over type of shared components DO test_shared = 0, 2 - ! Make copy of file creation property list + ! Make copy of file creation property list CALL H5Pcopy_f(fcpl, my_fcpl, error) CALL check("H5Pcopy",error,total_error) - ! Set up datatype for attributes + ! Set up datatype for attributes CALL H5Tcopy_f(H5T_NATIVE_INTEGER, attr_tid, error) CALL check("H5Tcopy",error,total_error) - ! Special setup for each type of shared components + ! Special setup for each type of shared components IF( test_shared .EQ. 0) THEN - ! Make attributes > 500 bytes shared + ! Make attributes > 500 bytes shared CALL H5Pset_shared_mesg_nindexes_f(my_fcpl,1,error) CALL check("H5Pset_shared_mesg_nindexes_f",error, total_error) CALL H5Pset_shared_mesg_index_f(my_fcpl, 0, H5O_SHMESG_ATTR_FLAG_F, 500,error) CALL check(" H5Pset_shared_mesg_index_f",error, total_error) ELSE - ! Set up copy of file creation property list + ! Set up copy of file creation property list CALL H5Pset_shared_mesg_nindexes_f(my_fcpl,3,error) - ! Make attributes > 500 bytes shared + ! Make attributes > 500 bytes shared CALL H5Pset_shared_mesg_index_f(my_fcpl, 0, H5O_SHMESG_ATTR_FLAG_F, 500,error) - ! Make datatypes & dataspaces > 1 byte shared (i.e. all of them :-) + ! Make datatypes & dataspaces > 1 byte shared (i.e. all of them :-) CALL H5Pset_shared_mesg_index_f(my_fcpl, 1, H5O_SHMESG_DTYPE_FLAG_F, 1,error) CALL H5Pset_shared_mesg_index_f(my_fcpl, 2, H5O_SHMESG_SDSPACE_FLAG_F, 1,error) ENDIF - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, my_fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Close FCPL copy + ! Close FCPL copy CALL h5pclose_f(my_fcpl, error) CALL check("h5pclose_f", error, total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Re-open file + ! Re-open file CALL h5fopen_f(FileName, H5F_ACC_RDWR_F, fid, error,fapl) CALL check("h5open_f",error,total_error) - ! Commit datatype to file + ! Commit datatype to file IF(test_shared.EQ.2) THEN CALL H5Tcommit_f(fid, TYPE1_NAME, attr_tid, error, H5P_DEFAULT_F, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("H5Tcommit",error,total_error) ENDIF - ! Set up to query the object creation properties + ! Set up to query the object creation properties CALL H5Pcreate_f(H5P_DATASET_CREATE_F,dcpl,error) CALL check("h5Pcreate_f",error,total_error) - ! Create datasets + ! Create datasets CALL h5dcreate_f(fid, DSET1_NAME, H5T_NATIVE_CHARACTER, sid, dataset, error, dcpl_id=dcpl ) CALL check("h5dcreate_f",error,total_error) CALL h5dcreate_f(fid, DSET2_NAME, H5T_NATIVE_CHARACTER, sid, dataset2, error, dcpl_id=dcpl ) CALL check("h5dcreate_f",error,total_error) - ! Retrieve limits for compact/dense attribute storage + ! Retrieve limits for compact/dense attribute storage CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f",error,total_error) - ! Close property list + ! Close property list CALL h5pclose_f(dcpl,error) CALL check("h5pclose_f", error, total_error) - ! Add attributes to each dataset, until after converting to dense storage + ! Add attributes to each dataset, until after converting to dense storage DO u = 0, (max_compact * 2) - 1 - ! Create attribute name + ! Create attribute name WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 - ! Alternate between creating "small" & "big" attributes + ! Alternate between creating "small" & "big" attributes IF(MOD(u+1,2).EQ.0)THEN - ! Create "small" attribute on first dataset + ! Create "small" attribute on first dataset CALL h5acreate_f(dataset, attrname, attr_tid, sid, attr, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute attr_integer_data(1) = u + 1 data_dims(1) = 1 CALL h5awrite_f(attr, attr_tid, attr_integer_data, data_dims, error) CALL check("h5awrite_f",error,total_error) ELSE - ! Create "big" attribute on first dataset + ! Create "big" attribute on first dataset CALL h5acreate_f(dataset, attrname, attr_tid, big_sid, attr, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute data_dims(1) = 1 attr_integer_data(1) = u + 1 @@ -1229,19 +1229,19 @@ SUBROUTINE test_attr_shared_rename( fcpl, fapl, total_error) ENDIF - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Alternate between creating "small" & "big" attributes + ! Alternate between creating "small" & "big" attributes IF(MOD(u+1,2).EQ.0)THEN - ! Create "small" attribute on second dataset + ! Create "small" attribute on second dataset CALL h5acreate_f(dataset2, attrname, attr_tid, sid, attr, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute attr_integer_data(1) = u + 1 data_dims(1) = 1 @@ -1249,12 +1249,12 @@ SUBROUTINE test_attr_shared_rename( fcpl, fapl, total_error) CALL check("h5awrite_f",error,total_error) ELSE - ! Create "big" attribute on second dataset + ! Create "big" attribute on second dataset CALL h5acreate_f(dataset2, attrname, attr_tid, big_sid, attr, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) -! Write data into the attribute +! Write data into the attribute attr_integer_data(1) = u + 1 @@ -1263,103 +1263,103 @@ SUBROUTINE test_attr_shared_rename( fcpl, fapl, total_error) ! CALL check("h5awrite_f",error,total_error) -! Check refcount for attribute +! Check refcount for attribute ENDIF - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Create new attribute name + ! Create new attribute name WRITE(chr2,'(I2.2)') u attrname2 = 'new attr '//chr2 - ! Change second dataset's attribute's name + ! Change second dataset's attribute's name CALL H5Arename_by_name_f(fid, DSET2_NAME, attrname, attrname2, error, lapl_id=H5P_DEFAULT_F) CALL check("H5Arename_by_name_f",error,total_error) - ! Check refcount on attributes now + ! Check refcount on attributes now - ! Check refcount on renamed attribute + ! Check refcount on renamed attribute CALL H5Aopen_f(dataset2, attrname2, attr, error, aapl_id=H5P_DEFAULT_F) CALL check("H5Aopen_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Check refcount on original attribute + ! Check refcount on original attribute CALL H5Aopen_f(dataset, attrname, attr, error) CALL check("H5Aopen",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Change second dataset's attribute's name back to original + ! Change second dataset's attribute's name back to original CALL H5Arename_by_name_f(fid, DSET2_NAME, attrname2, attrname, error) CALL check("H5Arename_by_name_f",error,total_error) - ! Check refcount on attributes now + ! Check refcount on attributes now - ! Check refcount on renamed attribute + ! Check refcount on renamed attribute CALL H5Aopen_f(dataset2, attrname, attr, error) CALL check("H5Aopen",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Check refcount on original attribute + ! Check refcount on original attribute - ! Check refcount on renamed attribute + ! Check refcount on renamed attribute CALL H5Aopen_f(dataset, attrname, attr, error) CALL check("H5Aopen",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) ENDDO - ! Close attribute's datatype + ! Close attribute's datatype CALL h5tclose_f(attr_tid, error) CALL check("h5tclose_f",error,total_error) - ! Close attribute's datatype + ! Close attribute's datatype CALL h5dclose_f(dataset, error) CALL check("h5dclose_f",error,total_error) CALL h5dclose_f(dataset2, error) CALL check("h5dclose_f",error,total_error) - ! Unlink datasets with attributes + ! Unlink datasets with attributes CALL H5Ldelete_f(fid, DSET1_NAME, error, H5P_DEFAULT_F) CALL check("HLdelete",error,total_error) CALL H5Ldelete_f(fid, DSET2_NAME, error) CALL check("HLdelete",error,total_error) - ! Unlink committed datatype + ! Unlink committed datatype IF(test_shared == 2)THEN CALL H5Ldelete_f(fid, TYPE1_NAME, error) CALL check("HLdelete_f",error,total_error) ENDIF - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Check size of file + ! Check size of file !filesize = h5_get_file_size(FILENAME); !verify(filesize, empty_filesize, "h5_get_file_size"); ENDDO - ! Close dataspaces + ! Close dataspaces CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) CALL h5sclose_f(big_sid, error) @@ -1384,9 +1384,9 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) INTEGER(HID_T), INTENT(IN) :: fapl INTEGER, INTENT(INOUT) :: total_error CHARACTER(LEN=8) :: FileName = "tattr.h5" - INTEGER(HID_T) :: fid ! HDF5 File ID - INTEGER(HID_T) :: dcpl ! Dataset creation property list ID - INTEGER(HID_T) :: sid ! Dataspace ID + INTEGER(HID_T) :: fid ! HDF5 File ID + INTEGER(HID_T) :: dcpl ! Dataset creation property list ID + INTEGER(HID_T) :: sid ! Dataspace ID CHARACTER(LEN=8) :: DSET1_NAME = "Dataset1" CHARACTER(LEN=8) :: DSET2_NAME = "Dataset2" @@ -1424,40 +1424,40 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) INTEGER :: idx_type INTEGER :: order - INTEGER :: u ! Local index variable + INTEGER :: u ! Local index variable INTEGER :: Input1 INTEGER(HSIZE_T) :: hzero = 0_HSIZE_T INTEGER :: minusone = -1 data_dims = 0 - ! Create dataspace for dataset & attributes + ! Create dataspace for dataset & attributes CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Create dataset creation property list + ! Create dataset creation property list CALL H5Pcreate_f(H5P_DATASET_CREATE_F,dcpl,error) CALL check("h5Pcreate_f",error,total_error) - ! Query the attribute creation properties + ! Query the attribute creation properties CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f",error,total_error) - ! Loop over operating on different indices on link fields + ! Loop over operating on different indices on link fields DO idx_type = H5_INDEX_NAME_F, H5_INDEX_CRT_ORDER_F - ! Loop over operating in different orders + ! Loop over operating in different orders DO order = H5_ITER_INC_F, H5_ITER_DEC_F - ! Loop over using index for creation order value + ! Loop over using index for creation order value DO i = 1, 2 - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Set attribute creation order tracking & indexing for object + ! Set attribute creation order tracking & indexing for object IF(new_format)THEN IF(use_index(i))THEN @@ -1471,7 +1471,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ENDIF - ! Create datasets + ! Create datasets CALL h5dcreate_f(fid, DSET1_NAME, H5T_NATIVE_CHARACTER, sid, dset1, error, dcpl ) CALL check("h5dcreate_f2",error,total_error) @@ -1482,7 +1482,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) CALL h5dcreate_f(fid, DSET3_NAME, H5T_NATIVE_CHARACTER, sid, dset3, error, dcpl ) CALL check("h5dcreate_f4",error,total_error) - ! Work on all the datasets + ! Work on all the datasets DO curr_dset = 0,NUM_DSETS-1 SELECT CASE (curr_dset) @@ -1497,36 +1497,36 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) END SELECT - ! Check for deleting non-existant attribute + ! Check for deleting non-existant attribute !EP CALL H5Adelete_by_idx_f(my_dataset, '.', idx_type, order, 0_HSIZE_T,error, lapl_id=H5P_DEFAULT_F) CALL H5Adelete_by_idx_f(my_dataset, '.', idx_type, order, hzero,error, lapl_id=H5P_DEFAULT_F) CALL verify("H5Adelete_by_idx_f",error,minusone,total_error) - ! Create attributes, up to limit of compact form + ! Create attributes, up to limit of compact form DO u = 0, max_compact - 1 - ! Create attribute + ! Create attribute WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 CALL h5acreate_f(my_dataset, attrname, H5T_NATIVE_INTEGER, sid, attr, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute attr_integer_data(1) = u data_dims(1) = 1 CALL h5awrite_f(attr, H5T_NATIVE_INTEGER, attr_integer_data, data_dims, error) CALL check("h5awrite_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Verify information for new attribute + ! Verify information for new attribute CALL attr_info_by_idx_check(my_dataset, attrname, INT(u,HSIZE_T), use_index(i), total_error ) ENDDO - ! Check for out of bound deletions + ! Check for out of bound deletions CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, INT(u,HSIZE_T), error, lapl_id=H5P_DEFAULT_F) CALL verify("H5Adelete_by_idx_f",error,minusone,total_error) @@ -1545,11 +1545,11 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ! CALL HDassert(0.AND."Toomanydatasets!") END SELECT - ! Delete attributes from compact storage + ! Delete attributes from compact storage DO u = 0, max_compact - 2 - ! Delete first attribute in appropriate order + ! Delete first attribute in appropriate order !EP CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, 0_HSIZE_T, error) @@ -1557,7 +1557,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) CALL check("H5Adelete_by_idx_f",error,total_error) - ! Verify the attribute information for first attribute in appropriate order + ! Verify the attribute information for first attribute in appropriate order ! HDmemset(&ainfo, 0, sizeof(ainfo)); !EP CALL h5aget_info_by_idx_f(my_dataset, ".", idx_type, order, 0_HSIZE_T, & @@ -1572,7 +1572,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) CALL verify("H5Aget_info_by_idx_f",corder, max_compact-(u + 2),total_error) ENDIF - ! Verify the name for first attribute in appropriate order + ! Verify the name for first attribute in appropriate order size = 7 ! *CHECK* IF NOT THE SAME SIZE CALL h5aget_name_by_idx_f(my_dataset, ".", idx_type, order,INT(0,hsize_t), & @@ -1589,7 +1589,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) CALL verify("h5aget_name_by_idx_f",error,0,total_error) ENDDO - ! Delete last attribute + ! Delete last attribute !EP CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, 0_HSIZE_T, error) CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, hzero, error) @@ -1597,7 +1597,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ENDDO -! Work on all the datasets +! Work on all the datasets DO curr_dset = 0,NUM_DSETS-1 SELECT CASE (curr_dset) @@ -1611,11 +1611,11 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ! CALL HDassert(0.AND."Toomanydatasets!") END SELECT - ! Create more attributes, to push into dense form + ! Create more attributes, to push into dense form DO u = 0, (max_compact * 2) - 1 - ! Create attribute + ! Create attribute WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 @@ -1623,24 +1623,24 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute attr_integer_data(1) = u data_dims(1) = 1 CALL h5awrite_f(attr, H5T_NATIVE_INTEGER, attr_integer_data, data_dims, error) CALL check("h5awrite_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) ENDDO - ! Check for out of bound deletion + ! Check for out of bound deletion CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, INT(u,HSIZE_T), error) CALL verify("H5Adelete_by_idx_f",error,minusone,total_error) ENDDO - ! Work on all the datasets + ! Work on all the datasets DO curr_dset = 0,NUM_DSETS-1 SELECT CASE (curr_dset) @@ -1652,15 +1652,15 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) my_dataset = dset3 END SELECT - ! Delete attributes from dense storage + ! Delete attributes from dense storage DO u = 0, (max_compact * 2) - 1 - 1 - ! Delete first attribute in appropriate order + ! Delete first attribute in appropriate order CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, INT(0,HSIZE_T), error) CALL check("H5Adelete_by_idx_f",error,total_error) - ! Verify the attribute information for first attribute in appropriate order + ! Verify the attribute information for first attribute in appropriate order CALL h5aget_info_by_idx_f(my_dataset, ".", idx_type, order, INT(0,HSIZE_T), & f_corder_valid, corder, cset, data_size, error) @@ -1672,7 +1672,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) CALL verify("H5Aget_info_by_idx_f",corder, ((max_compact * 2) - (u + 2)), total_error) ENDIF - ! Verify the name for first attribute in appropriate order + ! Verify the name for first attribute in appropriate order ! HDmemset(tmpname, 0, (size_t)NAME_BUF_SIZE); size = 7 ! *CHECK* if not the correct size @@ -1691,17 +1691,17 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ENDDO - ! Delete last attribute + ! Delete last attribute CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, INT(0,HSIZE_T), error, lapl_id=H5P_DEFAULT_F) CALL check("H5Adelete_by_idx_f",error,total_error) - ! Check for deletion on empty attribute storage again + ! Check for deletion on empty attribute storage again CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, INT(0,HSIZE_T), error) CALL verify("H5Adelete_by_idx_f",error,minusone,total_error) ENDDO - ! Close Datasets + ! Close Datasets CALL h5dclose_f(dset1, error) CALL check("h5dclose_f",error,total_error) CALL h5dclose_f(dset2, error) @@ -1709,18 +1709,18 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) CALL h5dclose_f(dset3, error) CALL check("h5dclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) ENDDO ENDDO ENDDO - ! Close property list + ! Close property list CALL h5pclose_f(dcpl,error) CALL check("h5pclose_f", error, total_error) - ! Close dataspace + ! Close dataspace CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) @@ -1775,77 +1775,77 @@ SUBROUTINE test_attr_shared_delete(fcpl, fapl, total_error) INTEGER(HSIZE_T), DIMENSION(1) :: adims2 = (/1/) ! Attribute dimension INTEGER :: arank = 1 ! Attribure rank - ! Output message about test being performed + ! Output message about test being performed - ! Initialize "big" attribute DATA - ! Create dataspace for dataset + ! Initialize "big" attribute DATA + ! Create dataspace for dataset CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Create "big" dataspace for "large" attributes + ! Create "big" dataspace for "large" attributes CALL h5screate_simple_f(arank, adims2, big_sid, error) CALL check("h5screate_simple_f",error,total_error) - ! Loop over type of shared components + ! Loop over type of shared components DO test_shared = 0, 2 - ! Make copy of file creation property list + ! Make copy of file creation property list CALL H5Pcopy_f(fcpl, my_fcpl, error) CALL check("H5Pcopy",error,total_error) - ! Set up datatype for attributes + ! Set up datatype for attributes CALL H5Tcopy_f(H5T_NATIVE_INTEGER, attr_tid, error) CALL check("H5Tcopy",error,total_error) - ! Special setup for each type of shared components + ! Special setup for each type of shared components IF( test_shared .EQ. 0) THEN - ! Make attributes > 500 bytes shared + ! Make attributes > 500 bytes shared CALL H5Pset_shared_mesg_nindexes_f(my_fcpl,1,error) CALL check("H5Pset_shared_mesg_nindexes_f",error, total_error) CALL H5Pset_shared_mesg_index_f(my_fcpl, 0, H5O_SHMESG_ATTR_FLAG_F, 500,error) CALL check(" H5Pset_shared_mesg_index_f",error, total_error) ELSE - ! Set up copy of file creation property list + ! Set up copy of file creation property list CALL H5Pset_shared_mesg_nindexes_f(my_fcpl,3,error) - ! Make attributes > 500 bytes shared + ! Make attributes > 500 bytes shared CALL H5Pset_shared_mesg_index_f(my_fcpl, 0, H5O_SHMESG_ATTR_FLAG_F, 500,error) - ! Make datatypes & dataspaces > 1 byte shared (i.e. all of them :-) + ! Make datatypes & dataspaces > 1 byte shared (i.e. all of them :-) CALL H5Pset_shared_mesg_index_f(my_fcpl, 1, H5O_SHMESG_DTYPE_FLAG_F, 1,error) CALL H5Pset_shared_mesg_index_f(my_fcpl, 2, H5O_SHMESG_SDSPACE_FLAG_F, 1,error) ENDIF - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, my_fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Close FCPL copy + ! Close FCPL copy CALL h5pclose_f(my_fcpl, error) CALL check("h5pclose_f", error, total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Re-open file + ! Re-open file CALL h5fopen_f(FileName, H5F_ACC_RDWR_F, fid, error,fapl) CALL check("h5open_f",error,total_error) - ! Commit datatype to file + ! Commit datatype to file IF(test_shared.EQ.2) THEN CALL H5Tcommit_f(fid, TYPE1_NAME, attr_tid, error, H5P_DEFAULT_F, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("H5Tcommit",error,total_error) ENDIF - ! Set up to query the object creation properties + ! Set up to query the object creation properties CALL H5Pcreate_f(H5P_DATASET_CREATE_F,dcpl,error) CALL check("h5Pcreate_f",error,total_error) - ! Create datasets + ! Create datasets CALL h5dcreate_f(fid, DSET1_NAME, H5T_NATIVE_CHARACTER, sid, dataset, error, dcpl_id=dcpl ) CALL check("h5dcreate_f",error,total_error) @@ -1853,42 +1853,42 @@ SUBROUTINE test_attr_shared_delete(fcpl, fapl, total_error) CALL h5dcreate_f(fid, DSET2_NAME, H5T_NATIVE_CHARACTER, sid, dataset2, error, dcpl_id=dcpl ) CALL check("h5dcreate_f",error,total_error) - ! Retrieve limits for compact/dense attribute storage + ! Retrieve limits for compact/dense attribute storage CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f",error,total_error) - ! Close property list + ! Close property list CALL h5pclose_f(dcpl,error) CALL check("h5pclose_f", error, total_error) - ! Add attributes to each dataset, until after converting to dense storage + ! Add attributes to each dataset, until after converting to dense storage DO u = 0, (max_compact * 2) - 1 - ! Create attribute name + ! Create attribute name WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 - ! Alternate between creating "small" & "big" attributes + ! Alternate between creating "small" & "big" attributes IF(MOD(u+1,2).EQ.0)THEN - ! Create "small" attribute on first dataset + ! Create "small" attribute on first dataset CALL h5acreate_f(dataset, attrname, attr_tid, sid, attr, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute attr_integer_data(1) = u + 1 data_dims(1) = 1 CALL h5awrite_f(attr, attr_tid, attr_integer_data, data_dims, error) CALL check("h5awrite_f",error,total_error) ELSE - ! Create "big" attribute on first dataset + ! Create "big" attribute on first dataset CALL h5acreate_f(dataset, attrname, attr_tid, big_sid, attr, error) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute attr_integer_data(1) = u + 1 data_dims(1) = 1 @@ -1897,31 +1897,31 @@ SUBROUTINE test_attr_shared_delete(fcpl, fapl, total_error) ENDIF - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Alternate between creating "small" & "big" attributes + ! Alternate between creating "small" & "big" attributes IF(MOD(u+1,2).EQ.0)THEN - ! Create "small" attribute on second dataset + ! Create "small" attribute on second dataset CALL h5acreate_f(dataset2, attrname, attr_tid, sid, attr, error) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute attr_integer_data(1) = u + 1 data_dims(1) = 1 CALL h5awrite_f(attr, attr_tid, attr_integer_data, data_dims, error) CALL check("h5awrite_f",error,total_error) ELSE - ! Create "big" attribute on second dataset + ! Create "big" attribute on second dataset CALL h5acreate_f(dataset2, attrname, attr_tid, big_sid, attr, error, acpl_id=H5P_DEFAULT_F, aapl_id=H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) -! Write data into the attribute +! Write data into the attribute attr_integer_data(1) = u + 1 @@ -1930,21 +1930,21 @@ SUBROUTINE test_attr_shared_delete(fcpl, fapl, total_error) CALL check("h5awrite_f",error,total_error) ENDIF - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) ENDDO - ! Delete attributes from second dataset + ! Delete attributes from second dataset DO u = 0, max_compact*2-1 - ! Create attribute name + ! Create attribute name WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 - ! Delete second dataset's attribute + ! Delete second dataset's attribute CALL H5Adelete_by_name_f(fid, DSET2_NAME, attrname,error,lapl_id=H5P_DEFAULT_F) CALL check("H5Adelete_by_name", error, total_error) @@ -1952,31 +1952,31 @@ SUBROUTINE test_attr_shared_delete(fcpl, fapl, total_error) CALL check("h5aopen_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) ENDDO - ! Close attribute's datatype + ! Close attribute's datatype CALL h5tclose_f(attr_tid, error) CALL check("h5tclose_f",error,total_error) - ! Close Datasets + ! Close Datasets CALL h5dclose_f(dataset, error) CALL check("h5dclose_f",error,total_error) CALL h5dclose_f(dataset2, error) CALL check("h5dclose_f",error,total_error) - ! Unlink datasets WITH attributes + ! Unlink datasets WITH attributes CALL h5ldelete_f(fid, DSET1_NAME, error, H5P_DEFAULT_F) CALL check("H5Ldelete_f", error, total_error) CALL h5ldelete_f(fid, DSET2_NAME, error) CALL check("H5Ldelete_f", error, total_error) - ! Unlink committed datatype + ! Unlink committed datatype IF( test_shared == 2) THEN CALL h5ldelete_f(fid, TYPE1_NAME, error) @@ -1984,13 +1984,13 @@ SUBROUTINE test_attr_shared_delete(fcpl, fapl, total_error) ENDIF - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) ENDDO - ! Close dataspaces + ! Close dataspaces CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) CALL h5sclose_f(big_sid, error) @@ -2040,73 +2040,73 @@ SUBROUTINE test_attr_dense_open( fcpl, fapl, total_error) data_dims = 0 - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Re-open file + ! Re-open file CALL h5fopen_f(FileName, H5F_ACC_RDWR_F, fid, error, fapl) CALL check("h5open_f",error,total_error) - ! Create dataspace for dataset + ! Create dataspace for dataset CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Query the group creation properties + ! Query the group creation properties CALL H5Pcreate_f(H5P_DATASET_CREATE_F,dcpl,error) CALL check("h5Pcreate_f",error,total_error) - ! Enable creation order tracking on attributes, so creation order tests work + ! Enable creation order tracking on attributes, so creation order tests work CALL H5Pset_attr_creation_order_f(dcpl, H5P_CRT_ORDER_TRACKED_F, error) CALL check("H5Pset_attr_creation_order",error,total_error) - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(fid, DSET1_NAME, H5T_NATIVE_CHARACTER, sid, dataset, error, & lcpl_id=H5P_DEFAULT_F, dcpl_id=dcpl, dapl_id=H5P_DEFAULT_F) CALL check("h5dcreate_f",error,total_error) - ! Retrieve limits for compact/dense attribute storage + ! Retrieve limits for compact/dense attribute storage CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f",error,total_error) - ! Close property list + ! Close property list CALL h5pclose_f(dcpl, error) CALL check("h5pclose_f",error,total_error) - ! Add attributes, until just before converting to dense storage + ! Add attributes, until just before converting to dense storage DO u = 0, max_compact - 1 - ! Create attribute + ! Create attribute WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 CALL h5acreate_f(dataset, attrname, H5T_NATIVE_INTEGER, sid, attr, error, aapl_id=H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute data_dims(1) = 1 CALL h5awrite_f(attr, H5T_NATIVE_INTEGER, u, data_dims, error) CALL check("h5awrite_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Verify attributes written so far + ! Verify attributes written so far CALL test_attr_dense_verify(dataset, u, total_error) ENDDO ! -! Add one more attribute, to push into "dense" storage -! Create attribute +! Add one more attribute, to push into "dense" storage +! Create attribute WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 @@ -2114,36 +2114,36 @@ SUBROUTINE test_attr_dense_open( fcpl, fapl, total_error) CALL h5acreate_f(dataset, attrname, H5T_NATIVE_INTEGER, sid, attr, error, aapl_id=H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write data into the attribute + ! Write data into the attribute data_dims(1) = 1 CALL h5awrite_f(attr, H5T_NATIVE_INTEGER, u, data_dims, error) CALL check("h5awrite_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Close dataspace + ! Close dataspace CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) - ! Verify all the attributes written + ! Verify all the attributes written ! ret = test_attr_dense_verify(dataset, (u + 1)); ! CHECK(ret, FAIL, "test_attr_dense_verify"); - ! CLOSE Dataset + ! CLOSE Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f",error,total_error) - ! Unlink dataset with attributes + ! Unlink dataset with attributes CALL h5ldelete_f(fid, DSET1_NAME, error, H5P_DEFAULT_F) CALL check("H5Ldelete_f", error, total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Check size of file + ! Check size of file ! filesize = h5_get_file_size(FILENAME); ! verify(filesize, empty_filesize, "h5_get_file_size") @@ -2179,21 +2179,21 @@ SUBROUTINE test_attr_dense_verify(loc_id, max_attr, total_error) data_dims = 0 - ! Retrieve the current # of reported errors + ! Retrieve the current # of reported errors ! old_nerrs = GetTestNumErrs(); - ! Re-open all the attributes by name and verify the data + ! Re-open all the attributes by name and verify the data DO u = 0, max_attr -1 - ! Open attribute + ! Open attribute WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 CALL h5aopen_f(loc_id, attrname, attr, error) CALL check("h5aopen_f",error,total_error) - ! Read data from the attribute + ! Read data from the attribute ! value = 103 data_dims(1) = 1 @@ -2202,22 +2202,22 @@ SUBROUTINE test_attr_dense_verify(loc_id, max_attr, total_error) CALL CHECK("H5Aread_F", error, total_error) CALL verify("H5Aread_F", value, u, total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) ENDDO - ! Re-open all the attributes by index and verify the data + ! Re-open all the attributes by index and verify the data DO u=0, max_attr-1 - ! Open attribute + ! Open attribute CALL H5Aopen_by_idx_f(loc_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(u,HSIZE_T), & attr, error, aapl_id=H5P_DEFAULT_F) - ! Verify Name + ! Verify Name WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 @@ -2228,14 +2228,14 @@ SUBROUTINE test_attr_dense_verify(loc_id, max_attr, total_error) WRITE(*,*) 'ERROR: attribute name different: attr_name = ',check_name, ', should be ', attrname total_error = total_error + 1 ENDIF - ! Read data from the attribute + ! Read data from the attribute data_dims(1) = 1 CALL h5aread_f(attr, H5T_NATIVE_INTEGER, value, data_dims, error) CALL CHECK("H5Aread_f", error, total_error) CALL verify("H5Aread_f", value, u, total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) ENDDO @@ -2270,30 +2270,30 @@ SUBROUTINE test_attr_corder_create_basic( fcpl, fapl, total_error ) INTEGER :: crt_order_flags INTEGER :: minusone = -1 - ! Output message about test being performed + ! Output message about test being performed ! WRITE(*,*) " - Testing Basic Code for Attributes with Creation Order Info" - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Create dataset creation property list + ! Create dataset creation property list CALL H5Pcreate_f(H5P_DATASET_CREATE_F,dcpl,error) CALL check("h5Pcreate_f",error,total_error) - ! Get creation order indexing on object + ! Get creation order indexing on object CALL H5Pget_attr_creation_order_f(dcpl, crt_order_flags, error) CALL check("H5Pget_attr_creation_order_f",error,total_error) CALL verify("H5Pget_attr_creation_order_f",crt_order_flags , 0, total_error) - ! Setting invalid combination of a attribute order creation order indexing on should fail + ! Setting invalid combination of a attribute order creation order indexing on should fail CALL H5Pset_attr_creation_order_f(dcpl, H5P_CRT_ORDER_INDEXED_F, error) CALL verify("H5Pset_attr_creation_order_f",error , minusone, total_error) CALL H5Pget_attr_creation_order_f(dcpl, crt_order_flags, error) CALL check("H5Pget_attr_creation_order_f",error,total_error) CALL verify("H5Pget_attr_creation_order_f",crt_order_flags , 0, total_error) - ! Set attribute creation order tracking & indexing for object + ! Set attribute creation order tracking & indexing for object CALL h5pset_attr_creation_order_f(dcpl, IOR(H5P_CRT_ORDER_TRACKED_F, H5P_CRT_ORDER_INDEXED_F), error) CALL check("H5Pset_attr_creation_order_f",error,total_error) @@ -2302,60 +2302,60 @@ SUBROUTINE test_attr_corder_create_basic( fcpl, fapl, total_error ) CALL verify("H5Pget_attr_creation_order_f",crt_order_flags , & IOR(H5P_CRT_ORDER_TRACKED_F, H5P_CRT_ORDER_INDEXED_F), total_error) - ! Create dataspace for dataset + ! Create dataspace for dataset CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(fid, DSET1_NAME, H5T_NATIVE_CHARACTER, sid, dataset, error, & lcpl_id=H5P_DEFAULT_F, dapl_id=H5P_DEFAULT_F, dcpl_id=dcpl) CALL check("h5dcreate_f",error,total_error) - ! Close dataspace + ! Close dataspace CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) - ! Close Dataset + ! Close Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f",error,total_error) - ! Close property list + ! Close property list CALL h5pclose_f(dcpl, error) CALL check("h5pclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Re-open file + ! Re-open file CALL h5fopen_f(FileName, H5F_ACC_RDWR_F, fid, error, fapl) CALL check("h5open_f",error,total_error) - ! Open dataset created + ! Open dataset created CALL h5dopen_f(fid, DSET1_NAME, dataset, error, H5P_DEFAULT_F ) CALL check("h5dopen_f",error,total_error) - ! Retrieve dataset creation property list for group + ! Retrieve dataset creation property list for group CALL H5Dget_create_plist_f(dataset, dcpl, error) CALL check("H5Dget_create_plist_f",error,total_error) - ! Query the attribute creation properties + ! Query the attribute creation properties CALL H5Pget_attr_creation_order_f(dcpl, crt_order_flags, error) CALL check("H5Pget_attr_creation_order_f",error,total_error) CALL verify("H5Pget_attr_creation_order_f",crt_order_flags , & IOR(H5P_CRT_ORDER_TRACKED_F, H5P_CRT_ORDER_INDEXED_F), total_error ) - ! Close property list + ! Close property list CALL h5pclose_f(dcpl, error) CALL check("h5pclose_f",error,total_error) - ! Close Dataset + ! Close Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) @@ -2418,97 +2418,97 @@ SUBROUTINE test_attr_basic_write(fapl, total_error) attr_data1a(3) = -99890 - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid1, error, H5P_DEFAULT_F, fapl) CALL check("h5fcreate_f",error,total_error) - ! Create dataspace for dataset + ! Create dataspace for dataset CALL h5screate_simple_f(rank1, dims1, sid1, error, maxdims1) CALL check("h5screate_simple_f",error,total_error) - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(fid1, DSET1_NAME, H5T_NATIVE_CHARACTER, sid1, dataset, error, H5P_DEFAULT_F, H5P_DEFAULT_F, H5P_DEFAULT_F ) CALL check("h5dcreate_f",error,total_error) - ! Create dataspace for attribute + ! Create dataspace for attribute CALL h5screate_simple_f(ATTR1_RANK, dimsa, sid2, error) CALL check("h5screate_simple_f",error,total_error) - ! Try to create an attribute on the file (should create an attribute on root group) + ! Try to create an attribute on the file (should create an attribute on root group) CALL h5acreate_f(fid1, ATTR1_NAME, H5T_NATIVE_INTEGER, sid2, attr, error, aapl_id=H5P_DEFAULT_F, acpl_id=H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Open the root group + ! Open the root group CALL H5Gopen_f(fid1, "/", group, error, H5P_DEFAULT_F) CALL check("H5Gopen_f",error,total_error) - ! Open attribute again + ! Open attribute again CALL h5aopen_f(group, ATTR1_NAME, attr, error) CALL check("h5aopen_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Close root group + ! Close root group CALL H5Gclose_f(group, error) CALL check("h5gclose_f",error,total_error) - ! Create an attribute for the dataset + ! Create an attribute for the dataset CALL h5acreate_f(dataset, ATTR1_NAME, H5T_NATIVE_INTEGER, sid2, attr, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write attribute information + ! Write attribute information CALL h5awrite_f(attr, H5T_NATIVE_INTEGER, attr_data1, dimsa, error) CALL check("h5awrite_f",error,total_error) - ! Create an another attribute for the dataset + ! Create an another attribute for the dataset CALL h5acreate_f(dataset, ATTR1A_NAME, H5T_NATIVE_INTEGER, sid2, attr2, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) - ! Write attribute information + ! Write attribute information CALL h5awrite_f(attr2, H5T_NATIVE_INTEGER, attr_data1a, dimsa, error) CALL check("h5awrite_f",error,total_error) - ! Check storage size for attribute + ! Check storage size for attribute CALL h5aget_storage_size_f(attr, attr_size, error) CALL check("h5aget_storage_size_f",error,total_error) !EP CALL verify("h5aget_storage_size_f", INT(attr_size), 2*HSIZE_T, total_error) - ! Read attribute information immediately, without closing attribute + ! Read attribute information immediately, without closing attribute CALL h5aread_f(attr, H5T_NATIVE_INTEGER, read_data1, dimsa, error) CALL check("h5aread_f",error,total_error) - ! Verify values read in + ! Verify values read in DO i = 1, ATTR1_DIM1 CALL verify('h5aread_f',attr_data1(i),read_data1(i), total_error) ENDDO - ! CLOSE attribute + ! CLOSE attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr2, error) CALL check("h5aclose_f",error,total_error) - ! change attribute name + ! change attribute name CALL H5Arename_f(dataset, ATTR1_NAME, ATTR_TMP_NAME, error) CALL check("H5Arename_f", error, total_error) - ! Open attribute again + ! Open attribute again CALL h5aopen_f(dataset, ATTR_TMP_NAME, attr, error) CALL check("h5aopen_f",error,total_error) - ! Verify new attribute name + ! Verify new attribute name ! Set a deliberately small size check_name = ' ' ! need to initialize or does not pass test @@ -2539,7 +2539,7 @@ SUBROUTINE test_attr_basic_write(fapl, total_error) CALL check('H5Aget_name_f',error,total_error) CALL verify('H5Aget_name_f',chr_exact_size,ATTR_TMP_NAME, total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr, error) CALL check("h5aclose_f",error,total_error) @@ -2547,11 +2547,11 @@ SUBROUTINE test_attr_basic_write(fapl, total_error) CALL check("h5sclose_f",error,total_error) CALL h5sclose_f(sid2, error) CALL check("h5sclose_f",error,total_error) - ! Close Dataset + ! Close Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid1, error) CALL check("h5fclose_f",error,total_error) @@ -2594,20 +2594,20 @@ SUBROUTINE test_attr_many(new_format, fcpl, fapl, total_error) data_dims = 0 - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, fcpl, fapl) CALL check("h5fcreate_f",error,total_error) - ! Create dataspace for attribute + ! Create dataspace for attribute CALL h5screate_f(H5S_SCALAR_F, sid, error) CALL check("h5screate_f",error,total_error) - ! Create group for attributes + ! Create group for attributes CALL H5Gcreate_f(fid, GROUP1_NAME, gid, error) CALL check("H5Gcreate_f", error, total_error) - ! Create many attributes + ! Create many attributes IF(new_format)THEN nattr = 250 @@ -2651,15 +2651,15 @@ SUBROUTINE test_attr_many(new_format, fcpl, fapl, total_error) ENDDO - ! Close group + ! Close group CALL H5Gclose_f(gid, error) CALL check("h5gclose_f",error,total_error) - ! Close file + ! Close file CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Close dataspaces + ! Close dataspaces CALL h5sclose_f(sid, error) CALL check("h5sclose_f",error,total_error) @@ -2677,7 +2677,7 @@ END SUBROUTINE test_attr_many ! * March 21, 2008 ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) @@ -2699,10 +2699,10 @@ SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) INTEGER(HSIZE_T) :: storage_size ! attributes storage requirements CHARACTER(LEN=2) :: chr2 INTEGER(HID_T) attr_id - ! Open each attribute on object by index and check that it's the correct one + ! Open each attribute on object by index and check that it's the correct one DO u = 0, max_attrs-1 - ! Open the attribute + ! Open the attribute WRITE(chr2,'(I2.2)') u attrname = 'attr '//chr2 @@ -2712,12 +2712,12 @@ SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) CALL check("h5aopen_f",error,total_error) - ! Get the attribute's information + ! Get the attribute's information CALL h5aget_info_f(attr_id, f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_f",error,total_error) - ! Check that the object's attributes are correct + ! Check that the object's attributes are correct CALL verify("h5aget_info_f.corder",corder,u,total_error) CALL verify("h5aget_info_f.corder_valid",f_corder_valid,.TRUE.,total_error) CALL verify("h5aget_info_f.cset", cset, H5T_CSET_ASCII_F, total_error) @@ -2727,18 +2727,18 @@ SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) CALL verify("h5aget_info_f.data_size", INT(data_size), INT(storage_size), total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr_id, error) CALL check("h5aclose_f",error,total_error) - ! Open the attribute + ! Open the attribute CALL H5Aopen_by_name_f(obj_id, ".", attrname, attr_id, error, lapl_id=H5P_DEFAULT_F, aapl_id=H5P_DEFAULT_F) CALL check("H5Aopen_by_name_f", error, total_error) CALL h5aget_info_f(attr_id, f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_f",error,total_error) - ! Check the attribute's information + ! Check the attribute's information CALL verify("h5aget_info_f",corder,u,total_error) CALL verify("h5aget_info_f",f_corder_valid,.TRUE.,total_error) CALL verify("h5aget_info_f", cset, H5T_CSET_ASCII_F, total_error) @@ -2746,21 +2746,21 @@ SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) CALL check("h5aget_storage_size_f",error,total_error) CALL verify("h5aget_info_f", INT(data_size), INT(storage_size), total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr_id, error) CALL check("h5aclose_f",error,total_error) - ! Open the attribute + ! Open the attribute CALL H5Aopen_by_name_f(fid, dsetname, attrname, attr_id, error) CALL check("H5Aopen_by_name_f", error, total_error) - ! Get the attribute's information + ! Get the attribute's information CALL h5aget_info_f(attr_id, f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_f",error,total_error) - ! Check the attribute's information + ! Check the attribute's information CALL verify("h5aget_info_f",corder,u,total_error) CALL verify("h5aget_info_f",f_corder_valid,.TRUE.,total_error) CALL verify("h5aget_info_f", cset, H5T_CSET_ASCII_F, total_error) @@ -2768,7 +2768,7 @@ SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) CALL check("h5aget_storage_size_f",error,total_error) CALL verify("h5aget_info_f", INT(data_size), INT(storage_size), total_error) - ! Close attribute + ! Close attribute CALL h5aclose_f(attr_id, error) CALL check("h5aclose_f",error,total_error) ENDDO diff --git a/fortran/test/tH5D.F90 b/fortran/test/tH5D.F90 index 7001b98..7f8a988 100644 --- a/fortran/test/tH5D.F90 +++ b/fortran/test/tH5D.F90 @@ -44,31 +44,31 @@ CONTAINS IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(OUT) :: total_error - + CHARACTER(LEN=5), PARAMETER :: filename = "dsetf" ! File name CHARACTER(LEN=80) :: fix_filename CHARACTER(LEN=4), PARAMETER :: dsetname = "dset" ! Dataset name CHARACTER(LEN=9), PARAMETER :: null_dsetname = "null_dset" ! Dataset name - + INTEGER(HID_T) :: file_id ! File identifier INTEGER(HID_T) :: dset_id ! Dataset identifier INTEGER(HID_T) :: null_dset ! Null dataset identifier INTEGER(HID_T) :: dspace_id ! Dataspace identifier INTEGER(HID_T) :: null_dspace ! Null dataspace identifier INTEGER(HID_T) :: dtype_id ! Datatype identifier - + INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions INTEGER :: rank = 2 ! Dataset rank - + INTEGER, DIMENSION(4,6) :: dset_data, data_out ! Data buffers INTEGER :: error ! Error flag - + INTEGER :: i, j !general purpose integers INTEGER(HSIZE_T), DIMENSION(2) :: data_dims INTEGER(HSIZE_T), DIMENSION(1) :: null_data_dim INTEGER :: null_dset_data = 1 ! null data INTEGER :: flag ! Space allocation status - + ! ! Initialize the dset_data array. ! @@ -157,10 +157,10 @@ CONTAINS CALL h5dget_space_status_f(dset_id, flag, error) CALL check("h5dget_space_status_f",error, total_error) CALL VERIFY("h5dget_space_status_f", flag, H5D_SPACE_STS_ALLOCATED_F, total_error) - + CALL h5dget_space_status_f(null_dset, flag, error) CALL check("h5dget_space_status_f",error, total_error) - CALL VERIFY("h5dget_space_status_f", flag, H5D_SPACE_STS_NOT_ALLOCATED_F, total_error) + CALL VERIFY("h5dget_space_status_f", flag, H5D_SPACE_STS_NOT_ALLOCATED_F, total_error) ! ! Get the dataset type. ! @@ -210,7 +210,7 @@ CONTAINS ! CALL h5sclose_f(dspace_id, error) CALL check("h5sclose_f", error, total_error) - + ! ! Terminate access to the data type. ! @@ -223,86 +223,86 @@ CONTAINS CALL check("h5fclose_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) - + RETURN END SUBROUTINE datasettest - + ! !the following subroutine tests h5dextend_f functionality ! SUBROUTINE extenddsettest(cleanup, total_error) - + IMPLICIT NONE - + LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(OUT) :: total_error - + ! !the dataset is stored in file "extf.h5" ! CHARACTER(LEN=4), PARAMETER :: filename = "extf" CHARACTER(LEN=80) :: fix_filename - + ! !dataset name is "ExtendibleArray" ! CHARACTER(LEN=15), PARAMETER :: dsetname = "ExtendibleArray" - + ! !dataset rank is 2 ! INTEGER :: RANK = 2 - + INTEGER(HID_T) :: file_id ! File identifier INTEGER(HID_T) :: dset_id ! Dataset identifier INTEGER(HID_T) :: dataspace ! Dataspace identifier INTEGER(HID_T) :: memspace ! memory Dataspace identifier INTEGER(HID_T) :: crp_list ! dataset creatation property identifier - + ! !dataset dimensions at creation time ! INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/3,3/) - + ! !data dimensions ! INTEGER(HSIZE_T), DIMENSION(2) :: dims1 = (/10,3/) - + ! !Maximum dimensions ! INTEGER(HSIZE_T), DIMENSION(2) :: maxdims - + ! !data arrays for reading and writing ! INTEGER, DIMENSION(10,3) :: data_in, data_out - + ! !Size of data in the file ! INTEGER(HSIZE_T), DIMENSION(2) :: size - + ! !general purpose integer ! INTEGER :: i, j INTEGER(HSIZE_T) :: ih, jh - + ! !flag to check operation success ! INTEGER :: error - + ! !Variables used in reading data back ! INTEGER(HSIZE_T), DIMENSION(2) :: dimsr, maxdimsr INTEGER :: rankr INTEGER(HSIZE_T), DIMENSION(2) :: data_dims - + ! !data initialization ! @@ -311,7 +311,7 @@ CONTAINS data_in(i,j) = 2 END DO END DO - + ! !Initialize FORTRAN predifined datatypes ! @@ -328,24 +328,24 @@ CONTAINS ENDIF CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error) CALL check("h5fcreate_f",error,total_error) - + ! !Create the data space with unlimited dimensions. ! maxdims = (/H5S_UNLIMITED_F, H5S_UNLIMITED_F/) - + CALL h5screate_simple_f(RANK, dims, dataspace, error, maxdims) CALL check("h5screate_simple_f",error,total_error) - + ! !Modify dataset creation properties, i.e. enable chunking ! CALL h5pcreate_f(H5P_DATASET_CREATE_F, crp_list, error) CALL check("h5pcreate_f",error,total_error) - + CALL h5pset_chunk_f(crp_list, RANK, dims1, error) CALL check("h5pset_chunk_f",error,total_error) - + ! !Create a dataset with 3X3 dimensions using cparms creation propertie . ! @@ -359,8 +359,8 @@ CONTAINS SIZE(2) = 3 CALL h5dextend_f(dset_id, size, error) CALL check("h5dextend_f",error,total_error) - - + + ! !Extend the dataset. Dataset becomes 10 x 3. ! @@ -368,7 +368,7 @@ CONTAINS SIZE(2) = 3; CALL h5dextend_f(dset_id, size, error) CALL check("h5dextend_f",error,total_error) - + ! !Write the data of size 10X3 to the extended dataset. ! @@ -376,13 +376,13 @@ CONTAINS data_dims(2) = 3 CALL H5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data_in, data_dims, error) CALL check("h5dwrite_f",error,total_error) - + ! !Close the dataspace for the dataset. ! CALL h5sclose_f(dataspace, error) CALL check("h5sclose_f",error,total_error) - + ! !Close the property list. ! @@ -393,13 +393,13 @@ CONTAINS ! CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f",error,total_error) - + ! !Close the file. ! CALL h5fclose_f(file_id, error) CALL check("h5fclose_f",error,total_error) - + ! !read the data back ! @@ -407,19 +407,19 @@ CONTAINS ! CALL h5fopen_f (fix_filename, H5F_ACC_RDONLY_F, file_id, error) CALL check("hfopen_f",error,total_error) - + ! !Open the dataset. ! CALL h5dopen_f(file_id, dsetname, dset_id, error) CALL check("h5dopen_f",error,total_error) - + ! !Get dataset's dataspace handle. ! CALL h5dget_space_f(dset_id, dataspace, error) CALL check("h5dget_space_f",error,total_error) - + ! !Get dataspace's rank. ! @@ -429,7 +429,7 @@ CONTAINS WRITE(*,*) "dataset rank error occured" STOP END IF - + ! !Get dataspace's dimensinons. ! @@ -439,27 +439,27 @@ CONTAINS WRITE(*,*) "dataset dimensions error occured" STOP END IF - + ! !Get creation property list. ! CALL h5dget_create_plist_f(dset_id, crp_list, error) CALL check("h5dget_create_plist_f",error,total_error) - + ! !create memory dataspace. ! CALL h5screate_simple_f(rankr, dimsr, memspace, error) CALL check("h5screate_simple_f",error,total_error) - + ! !Read data ! CALL H5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error, memspace, dataspace) CALL check("h5dread_f",error,total_error) - + ! !Compare the data. ! @@ -471,31 +471,31 @@ CONTAINS END IF END DO END DO - + ! !Close the dataspace for the dataset. ! CALL h5sclose_f(dataspace, error) CALL check("h5sclose_f",error,total_error) - + ! !Close the memspace for the dataset. ! CALL h5sclose_f(memspace, error) CALL check("h5sclose_f",error,total_error) - + ! !Close the property list. ! CALL h5pclose_f(crp_list, error) CALL check("h5pclose_f",error,total_error) - + ! !Close the dataset. ! CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f",error,total_error) - + ! !Close the file. ! @@ -503,7 +503,7 @@ CONTAINS CALL check("h5fclose_f",error,total_error) IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) - + RETURN END SUBROUTINE extenddsettest @@ -549,7 +549,7 @@ CONTAINS DO i = 1, dset_dim1 DO j = 1, dset_dim2 n = n + 1 - data_in(i,j) = n + data_in(i,j) = n END DO END DO CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file, error, fcpl) @@ -557,7 +557,7 @@ CONTAINS ! Create the data space dims(1:2) = (/dset_dim1,dset_dim2/) - + CALL h5screate_simple_f(2, dims, space, error) CALL check("h5screate_simple_f",error,total_error) @@ -596,7 +596,7 @@ CONTAINS total_error = total_error + 1 RETURN ENDIF - ! The pos= specifier illustrates that positions are in bytes, + ! The pos= specifier illustrates that positions are in bytes, ! starting from byte 1 (as opposed to C, where they start from byte 0) READ(10, POS=offset+1, IOSTAT=ios) rdata IF(ios.NE.0)THEN @@ -625,7 +625,7 @@ CONTAINS CALL check("h5_cleanup_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) - + END SUBROUTINE test_userblock_offset END MODULE TH5D diff --git a/fortran/test/tH5E_F03.F90 b/fortran/test/tH5E_F03.F90 index 1878966..a8ca103 100644 --- a/fortran/test/tH5E_F03.F90 +++ b/fortran/test/tH5E_F03.F90 @@ -5,7 +5,7 @@ ! ! FUNCTION ! Test FORTRAN HDF5 H5E APIs which are dependent on FORTRAN 2003 -! features. +! features. ! ! COPYRIGHT ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -168,10 +168,10 @@ SUBROUTINE test_error(total_error) !!$#ifdef H5_USE_16_API !!$ if (old_func != (H5E_auto_t)H5Eprint) !!$ TEST_ERROR; -!!$#else H5_USE_16_API +!!$#else H5_USE_16_API !!$ if (old_func != (H5E_auto2_t)H5Eprint2) !!$ TEST_ERROR; -!!$#endif H5_USE_16_API +!!$#endif H5_USE_16_API ! set the customized error handling routine diff --git a/fortran/test/tH5F.F90 b/fortran/test/tH5F.F90 index b898c21..16464dd 100644 --- a/fortran/test/tH5F.F90 +++ b/fortran/test/tH5F.F90 @@ -25,10 +25,10 @@ ! !***** ! -! In the mountingtest subroutine we create one file with a group in it, +! In the mountingtest subroutine we create one file with a group in it, ! and another file with a dataset. Mounting is used to -! access the dataset from the second file as a member of a group -! in the first file. +! access the dataset from the second file as a member of a group +! in the first file. MODULE TH5F @@ -148,7 +148,7 @@ CONTAINS CALL check(" h5tcopy_f",error,total_error) CALL h5tcopy_f(H5T_NATIVE_CHARACTER, t4, error) CALL check(" h5tcopy_f",error,total_error) - + CALL h5fget_obj_count_f(INT(H5F_OBJ_ALL_F,HID_T), H5F_OBJ_ALL_F, obj_count, error) CALL check(" h5fget_obj_count_f",error,total_error) @@ -280,7 +280,7 @@ CONTAINS IF(obj_count.NE.1)THEN total_error = total_error + 1 - ENDIF + ENDIF CALL h5fopen_f (fix_filename2, H5F_ACC_RDWR_F, file2_id, error) CALL check("h5fopen_f",error,total_error) @@ -290,7 +290,7 @@ CONTAINS IF(obj_count.NE.2)THEN total_error = total_error + 1 - ENDIF + ENDIF ! !Check file numbers diff --git a/fortran/test/tH5F_F03.F90 b/fortran/test/tH5F_F03.F90 index 8cc6b83..f938565 100644 --- a/fortran/test/tH5F_F03.F90 +++ b/fortran/test/tH5F_F03.F90 @@ -5,7 +5,7 @@ ! ! FUNCTION ! Test FORTRAN HDF5 H5F APIs which are dependent on FORTRAN 2003 -! features. +! features. ! ! COPYRIGHT ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -37,8 +37,8 @@ MODULE TH5F_F03 USE HDF5 - USE TH5_MISC - USE TH5_MISC_GEN + USE TH5_MISC + USE TH5_MISC_GEN USE ISO_C_BINDING CONTAINS @@ -79,21 +79,21 @@ SUBROUTINE test_get_file_image(total_error) CALL h5fcreate_f("tget_file_image.h5", H5F_ACC_TRUNC_F, file_id, error, H5P_DEFAULT_F, fapl) CALL check("h5fcreate_f", error, total_error) - ! Set up data space for new data set + ! Set up data space for new data set dims(1:2) = (/10,10/) - + CALL h5screate_simple_f(2, dims, space_id, error) CALL check("h5screate_simple_f", error, total_error) - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(file_id, "dset 0", H5T_NATIVE_INTEGER, space_id, dset_id, error) CALL check("h5dcreate_f", error, total_error) - ! Write some data to the data set + ! Write some data to the data set DO i = 1, 100 data(i) = INT(i) ENDDO - + f_ptr = C_LOC(data(1)) CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, f_ptr, error) CALL check("h5dwrite_f",error, total_error) @@ -102,7 +102,7 @@ SUBROUTINE test_get_file_image(total_error) CALL h5fflush_f(file_id, H5F_SCOPE_GLOBAL_F, error) CALL check("h5fflush_f",error, total_error) - ! Open the test file using standard I/O calls + ! Open the test file using standard I/O calls OPEN(UNIT=10,FILE='tget_file_image.h5', ACCESS='STREAM') ! Get the size of the test file ! @@ -110,8 +110,8 @@ SUBROUTINE test_get_file_image(total_error) ! may be larger. This is OK, as long as (in this specialized instance) ! the remainder of the file is all '\0's. ! - ! With latest mods to truncate call in core file drive, - ! file size should match image size; get the file size + ! With latest mods to truncate call in core file drive, + ! file size should match image size; get the file size INQUIRE(UNIT=10, SIZE=file_sz) CLOSE(UNIT=10) @@ -131,7 +131,7 @@ SUBROUTINE test_get_file_image(total_error) CALL verify("h5fget_file_image_f", INT(itmp_a), 1, total_error) ! Routine should not change the value CALL verify("h5fget_file_image_f", file_sz, INT(image_size), total_error) - ! Allocate a buffer of the appropriate size + ! Allocate a buffer of the appropriate size ALLOCATE(image_ptr(1:image_size)) ! Load the image of the file into the buffer @@ -139,7 +139,7 @@ SUBROUTINE test_get_file_image(total_error) CALL h5fget_file_image_f(file_id, f_ptr, image_size, error) CALL check("h5fget_file_image_f",error, total_error) - ! Close dset and space + ! Close dset and space CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f", error, total_error) CALL h5sclose_f(space_id, error) @@ -151,7 +151,7 @@ SUBROUTINE test_get_file_image(total_error) ! Allocate a buffer for the test file image ALLOCATE(file_image_ptr(1:image_size)) - ! Open the test file using standard I/O calls + ! Open the test file using standard I/O calls OPEN(UNIT=10,FILE='tget_file_image.h5', FORM='UNFORMATTED', ACCESS='STREAM') ! Read the test file from disk into the buffer diff --git a/fortran/test/tH5G_1_8.F90 b/fortran/test/tH5G_1_8.F90 index 58431a1..c35edad 100644 --- a/fortran/test/tH5G_1_8.F90 +++ b/fortran/test/tH5G_1_8.F90 @@ -22,7 +22,7 @@ ! ! CONTAINS SUBROUTINES ! group_test, group_info, timestamps, mklinks, test_move_preserves, lifecycle -! cklinks, delete_by_idx, link_info_by_idx_check, test_lcpl, objcopy, +! cklinks, delete_by_idx, link_info_by_idx_check, test_lcpl, objcopy, ! lapl_nlinks ! !***** @@ -41,7 +41,7 @@ SUBROUTINE group_test(cleanup, total_error) LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error - INTEGER(HID_T) :: fapl, fapl2, my_fapl ! File access property lists + INTEGER(HID_T) :: fapl, fapl2, my_fapl ! File access property lists INTEGER :: error, ret_total_error @@ -49,15 +49,15 @@ SUBROUTINE group_test(cleanup, total_error) CALL H5Pcreate_f(H5P_FILE_ACCESS_F, fapl, error) CALL check("H5Pcreate_f",error, total_error) - ! Copy the file access property list + ! Copy the file access property list CALL H5Pcopy_f(fapl, fapl2, error) CALL check("H5Pcopy_f",error, total_error) - ! Set the "use the latest version of the format" bounds for creating objects in the file + ! Set the "use the latest version of the format" bounds for creating objects in the file CALL H5Pset_libver_bounds_f(fapl2, H5F_LIBVER_LATEST_F, H5F_LIBVER_LATEST_F, error) CALL check("H5Pset_libver_bounds_f",error, total_error) - ! Check for FAPL to USE + ! Check for FAPL to USE my_fapl = fapl2 ret_total_error = 0 @@ -135,7 +135,7 @@ END SUBROUTINE group_test ! * February 18, 2008 ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE group_info(cleanup, fapl, total_error) @@ -143,21 +143,21 @@ SUBROUTINE group_info(cleanup, fapl, total_error) INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl - INTEGER(HID_T) :: gcpl_id ! Group creation property list ID + INTEGER(HID_T) :: gcpl_id ! Group creation property list ID - INTEGER :: max_compact ! Maximum # of links to store in group compactly - INTEGER :: min_dense ! Minimum # of links to store in group "densely" + INTEGER :: max_compact ! Maximum # of links to store in group compactly + INTEGER :: min_dense ! Minimum # of links to store in group "densely" - INTEGER :: idx_type ! Type of index to operate on - INTEGER :: order, iorder ! Order within in the index - LOGICAL, DIMENSION(1:2) :: use_index = (/.FALSE.,.TRUE./) ! Use index on creation order values + INTEGER :: idx_type ! Type of index to operate on + INTEGER :: order, iorder ! Order within in the index + LOGICAL, DIMENSION(1:2) :: use_index = (/.FALSE.,.TRUE./) ! Use index on creation order values CHARACTER(LEN=6), PARAMETER :: prefix = 'links0' - CHARACTER(LEN=9), PARAMETER :: filename = prefix//'.h5' ! File name + CHARACTER(LEN=9), PARAMETER :: filename = prefix//'.h5' ! File name INTEGER :: Input1 - INTEGER(HID_T) :: group_id ! Group ID - INTEGER(HID_T) :: soft_group_id ! Group ID for soft links + INTEGER(HID_T) :: group_id ! Group ID + INTEGER(HID_T) :: soft_group_id ! Group ID for soft links - INTEGER :: i ! Local index variables + INTEGER :: i ! Local index variables INTEGER :: storage_type ! Type of storage for links in group: ! H5G_STORAGE_TYPE_COMPACT: Compact storage ! H5G_STORAGE_TYPE_DENSE: Indexed storage @@ -165,34 +165,34 @@ SUBROUTINE group_info(cleanup, fapl, total_error) INTEGER :: nlinks ! Number of links in group INTEGER :: max_corder ! Current maximum creation order value for group - INTEGER :: u,v ! Local index variables + INTEGER :: u,v ! Local index variables CHARACTER(LEN=2) :: chr2 - INTEGER(HID_T) :: group_id2, group_id3 ! Group IDs - CHARACTER(LEN=7) :: objname ! Object name - CHARACTER(LEN=7) :: objname2 ! Object name - CHARACTER(LEN=19) :: valname ! Link value + INTEGER(HID_T) :: group_id2, group_id3 ! Group IDs + CHARACTER(LEN=7) :: objname ! Object name + CHARACTER(LEN=7) :: objname2 ! Object name + CHARACTER(LEN=19) :: valname ! Link value CHARACTER(LEN=12), PARAMETER :: CORDER_GROUP_NAME = "corder_group" CHARACTER(LEN=17), PARAMETER :: CORDER_SOFT_GROUP_NAME = "corder_soft_group" - INTEGER(HID_T) :: file_id ! File ID - INTEGER :: error ! Generic return value + INTEGER(HID_T) :: file_id ! File ID + INTEGER :: error ! Generic return value LOGICAL :: mounted LOGICAL :: cleanup - ! Create group creation property list + ! Create group creation property list CALL H5Pcreate_f(H5P_GROUP_CREATE_F, gcpl_id, error ) CALL check("H5Pcreate_f", error, total_error) - ! Query the group creation properties + ! Query the group creation properties CALL H5Pget_link_phase_change_f(gcpl_id, max_compact, min_dense, error) CALL check("H5Pget_link_phase_change_f", error, total_error) - ! Loop over operating on different indices on link fields + ! Loop over operating on different indices on link fields DO idx_type = H5_INDEX_NAME_F, H5_INDEX_CRT_ORDER_F - ! Loop over operating in different orders + ! Loop over operating in different orders DO iorder = H5_ITER_INC_F, H5_ITER_NATIVE_F - ! Loop over using index for creation order value + ! Loop over using index for creation order value DO i = 1, 2 - ! Print appropriate test message + ! Print appropriate test message IF(idx_type == H5_INDEX_CRT_ORDER_F)THEN IF(iorder == H5_ITER_INC_F)THEN order = H5_ITER_INC_F @@ -241,11 +241,11 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ENDIF END IF - ! Create file + ! Create file CALL H5Fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error, H5P_DEFAULT_F, fapl) CALL check("H5Fcreate_f", error, total_error) - ! Set creation order tracking & indexing on group + ! Set creation order tracking & indexing on group IF(use_index(i))THEN Input1 = H5P_CRT_ORDER_INDEXED_F ELSE @@ -254,103 +254,103 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL H5Pset_link_creation_order_f(gcpl_id, IOR(H5P_CRT_ORDER_TRACKED_F, Input1), error) CALL check("H5Pset_link_creation_order_f", error, total_error) - ! Create group with creation order tracking on + ! Create group with creation order tracking on CALL H5Gcreate_f(file_id, CORDER_GROUP_NAME, group_id, error, gcpl_id=gcpl_id) CALL check("H5Gcreate_f", error, total_error) - ! Create group with creation order tracking on for soft links + ! Create group with creation order tracking on for soft links CALL H5Gcreate_f(file_id, CORDER_SOFT_GROUP_NAME, soft_group_id, error, & OBJECT_NAMELEN_DEFAULT_F, H5P_DEFAULT_F, gcpl_id) CALL check("H5Gcreate_f", error, total_error) - ! Check for out of bound query by index on empty group, should fail + ! Check for out of bound query by index on empty group, should fail CALL H5Gget_info_by_idx_f(group_id, ".", H5_INDEX_NAME_F, order, INT(0,HSIZE_T), & storage_type, nlinks, max_corder, error) CALL verify("H5Gget_info_by_idx_f", error, -1, total_error) - ! Create several links, up to limit of compact form + ! Create several links, up to limit of compact form DO u = 0, max_compact-1 - ! Make name for link + ! Make name for link WRITE(chr2,'(I2.2)') u objname = 'fill '//chr2 - ! Create hard link, with group object + ! Create hard link, with group object CALL H5Gcreate_f(group_id, objname, group_id2, error, OBJECT_NAMELEN_DEFAULT_F, H5P_DEFAULT_F, gcpl_id) CALL check("H5Gcreate_f", error, total_error) - ! Retrieve group's information + ! Retrieve group's information CALL H5Gget_info_f(group_id2, storage_type, nlinks, max_corder, error, mounted) CALL check("H5Gget_info_f", error, total_error) - ! Check (new/empty) group's information + ! Check (new/empty) group's information CALL verify("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_f", max_corder, 0, total_error) CALL verify("H5Gget_info_f", nlinks, 0, total_error) CALL verify("H5Gget_info_f.mounted", mounted,.FALSE.,total_error) - ! Retrieve group's information + ! Retrieve group's information CALL H5Gget_info_by_name_f(group_id, objname, storage_type, nlinks, max_corder, error, mounted=mounted) CALL check("H5Gget_info_by_name_f", error, total_error) - ! Check (new/empty) group's information + ! Check (new/empty) group's information CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_by_name_f", max_corder, 0, total_error) CALL verify("H5Gget_info_by_name_f", nlinks, 0, total_error) CALL verify("H5Gget_info_by_name_f.mounted", mounted,.FALSE.,total_error) - ! Retrieve group's information + ! Retrieve group's information CALL H5Gget_info_by_name_f(group_id2, ".", storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_by_name", error, total_error) - ! Check (new/empty) group's information + ! Check (new/empty) group's information CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_by_name_f", max_corder, 0, total_error) CALL verify("H5Gget_info_by_name_f", nlinks, 0, total_error) - ! Create objects in new group created + ! Create objects in new group created DO v = 0, u - ! Make name for link + ! Make name for link WRITE(chr2,'(I2.2)') v objname2 = 'fill '//chr2 - ! Create hard link, with group object + ! Create hard link, with group object CALL H5Gcreate_f(group_id2, objname2, group_id3, error ) CALL check("H5Gcreate_f", error, total_error) - ! Close group created + ! Close group created CALL H5Gclose_f(group_id3, error) CALL check("H5Gclose_f", error, total_error) ENDDO - ! Retrieve group's information + ! Retrieve group's information CALL H5Gget_info_f(group_id2, storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_f", error, total_error) - ! Check (new) group's information + ! Check (new) group's information CALL verify("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_f", max_corder, u+1, total_error) CALL verify("H5Gget_info_f", nlinks, u+1, total_error) - ! Retrieve group's information + ! Retrieve group's information CALL H5Gget_info_by_name_f(group_id, objname, storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_by_name_f", error, total_error) - ! Check (new) group's information + ! Check (new) group's information CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_by_name_f",max_corder, u+1, total_error) CALL verify("H5Gget_info_by_name_f", nlinks, u+1, total_error) - ! Retrieve group's information + ! Retrieve group's information CALL H5Gget_info_by_name_f(group_id2, ".", storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_by_name_f", error, total_error) - ! Check (new) group's information + ! Check (new) group's information CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_by_name_f", max_corder, u+1, total_error) CALL verify("H5Gget_info_by_name_f", nlinks, u+1, total_error) - ! Retrieve group's information + ! Retrieve group's information IF(order.NE.H5_ITER_NATIVE_F)THEN IF(order.EQ.H5_ITER_INC_F) THEN CALL H5Gget_info_by_idx_f(group_id, ".", idx_type, order, INT(u,HSIZE_T), & @@ -363,72 +363,72 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL verify("H5Gget_info_by_idx_f", mounted,.FALSE.,total_error) CALL check("H5Gget_info_by_idx_f", error, total_error) ENDIF - ! Check (new) group's information + ! Check (new) group's information CALL verify("H5Gget_info_by_idx_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_by_idx_f", max_corder, u+1, total_error) CALL verify("H5Gget_info_by_idx_f", nlinks, u+1, total_error) ENDIF - ! Close group created + ! Close group created CALL H5Gclose_f(group_id2, error) CALL check("H5Gclose_f", error, total_error) - ! Retrieve main group's information + ! Retrieve main group's information CALL H5Gget_info_f(group_id, storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_f", error, total_error) - ! Check main group's information + ! Check main group's information CALL verify("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_f", max_corder, u+1, total_error) CALL verify("H5Gget_info_f", nlinks, u+1, total_error) - ! Retrieve main group's information, by name + ! Retrieve main group's information, by name CALL H5Gget_info_by_name_f(file_id, CORDER_GROUP_NAME, storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_by_name_f", error, total_error) - ! Check main group's information + ! Check main group's information CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_by_name_f", max_corder, u+1, total_error) CALL verify("H5Gget_info_by_name_f", nlinks, u+1, total_error) - ! Retrieve main group's information, by name + ! Retrieve main group's information, by name CALL H5Gget_info_by_name_f(group_id, ".", storage_type, nlinks, max_corder, error, H5P_DEFAULT_F) CALL check("H5Gget_info_by_name_f", error, total_error) - ! Check main group's information + ! Check main group's information CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_by_name_f", max_corder, u+1, total_error) CALL verify("H5Gget_info_by_name_f", nlinks, u+1, total_error) - ! Create soft link in another group, to objects in main group + ! Create soft link in another group, to objects in main group valname = CORDER_GROUP_NAME//objname CALL H5Lcreate_soft_f(valname, soft_group_id, objname, error, H5P_DEFAULT_F, H5P_DEFAULT_F) - ! Retrieve soft link group's information, by name + ! Retrieve soft link group's information, by name CALL H5Gget_info_f(soft_group_id, storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_f", error, total_error) - ! Check soft link group's information + ! Check soft link group's information CALL verify("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) CALL verify("H5Gget_info_f", max_corder, u+1, total_error) CALL verify("H5Gget_info_f", nlinks, u+1, total_error) ENDDO - ! Close the groups + ! Close the groups CALL H5Gclose_f(group_id, error) CALL check("H5Gclose_f", error, total_error) CALL H5Gclose_f(soft_group_id, error) CALL check("H5Gclose_f", error, total_error) - ! Close the file + ! Close the file CALL H5Fclose_f(file_id, error) CALL check("H5Fclose_f", error, total_error) ENDDO ENDDO ENDDO - ! Free resources + ! Free resources CALL H5Pclose_f(gcpl_id, error) CALL check("H5Pclose_f", error, total_error) @@ -449,7 +449,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! * February 20, 2008 ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE timestamps(cleanup, fapl, total_error) @@ -457,15 +457,15 @@ SUBROUTINE group_info(cleanup, fapl, total_error) INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl - INTEGER(HID_T) :: file_id ! File ID - INTEGER(HID_T) :: group_id ! Group ID - INTEGER(HID_T) :: group_id2 ! Group ID - INTEGER(HID_T) :: gcpl_id ! Group creation property list ID - INTEGER(HID_T) :: gcpl_id2 ! Group creation property list ID + INTEGER(HID_T) :: file_id ! File ID + INTEGER(HID_T) :: group_id ! Group ID + INTEGER(HID_T) :: group_id2 ! Group ID + INTEGER(HID_T) :: gcpl_id ! Group creation property list ID + INTEGER(HID_T) :: gcpl_id2 ! Group creation property list ID CHARACTER(LEN=6), PARAMETER :: prefix = 'links9' - CHARACTER(LEN=9), PARAMETER :: filename = prefix//'.h5' ! File name - ! Timestamp macros + CHARACTER(LEN=9), PARAMETER :: filename = prefix//'.h5' ! File name + ! Timestamp macros CHARACTER(LEN=10), PARAMETER :: TIMESTAMP_GROUP_1="timestamp1" CHARACTER(LEN=10), PARAMETER :: TIMESTAMP_GROUP_2="timestamp2" LOGICAL :: track_times @@ -473,58 +473,58 @@ SUBROUTINE group_info(cleanup, fapl, total_error) INTEGER :: error - ! Print test message + ! Print test message ! WRITE(*,*) "timestamps on objects" - ! Create group creation property list + ! Create group creation property list CALL H5Pcreate_f(H5P_GROUP_CREATE_F, gcpl_id, error ) CALL check("H5Pcreate_f", error, total_error) - ! Query the object timestamp setting + ! Query the object timestamp setting CALL H5Pget_obj_track_times_f(gcpl_id, track_times, error) CALL check("H5Pget_obj_track_times_f", error, total_error) - ! Check default timestamp information + ! Check default timestamp information CALL verify("H5Pget_obj_track_times",track_times,.TRUE.,total_error) - ! Set a non-default object timestamp setting + ! Set a non-default object timestamp setting CALL H5Pset_obj_track_times_f(gcpl_id, .FALSE., error) CALL check("H5Pset_obj_track_times_f", error, total_error) - ! Query the object timestamp setting + ! Query the object timestamp setting CALL H5Pget_obj_track_times_f(gcpl_id, track_times, error) CALL check("H5Pget_obj_track_times_f", error, total_error) - ! Check default timestamp information + ! Check default timestamp information CALL verify("H5Pget_obj_track_times",track_times,.FALSE.,total_error) - ! Create file + ! Create file !h5_fixname(FILENAME[0], fapl, filename, sizeof filename); CALL H5Fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error, H5P_DEFAULT_F, fapl) CALL check("h5fcreate_f",error,total_error) - ! Create group with non-default object timestamp setting + ! Create group with non-default object timestamp setting CALL h5gcreate_f(file_id, TIMESTAMP_GROUP_1, group_id, error, & OBJECT_NAMELEN_DEFAULT_F, H5P_DEFAULT_F, gcpl_id, H5P_DEFAULT_F) CALL check("h5fcreate_f",error,total_error) - ! Close the group creation property list + ! Close the group creation property list CALL H5Pclose_f(gcpl_id, error) CALL check("H5Pclose_f", error, total_error) - ! Create group with default object timestamp setting + ! Create group with default object timestamp setting CALL h5gcreate_f(file_id, TIMESTAMP_GROUP_2, group_id2, error, & OBJECT_NAMELEN_DEFAULT_F, H5P_DEFAULT_F, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5fcreate_f",error,total_error) - ! Retrieve the new groups' creation properties + ! Retrieve the new groups' creation properties CALL H5Gget_create_plist_f(group_id, gcpl_id, error) CALL check("H5Gget_create_plist", error, total_error) CALL H5Gget_create_plist_f(group_id2, gcpl_id2, error) CALL check("H5Gget_create_plist", error, total_error) - ! Query & verify the object timestamp settings + ! Query & verify the object timestamp settings CALL H5Pget_obj_track_times_f(gcpl_id, track_times, error) CALL check("H5Pget_obj_track_times_f", error, total_error) CALL verify("H5Pget_obj_track_times1",track_times,.FALSE.,total_error) @@ -532,11 +532,11 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Pget_obj_track_times_f", error, total_error) CALL verify("H5Pget_obj_track_times2",track_times,.TRUE.,total_error) -! Query the object information for each group +! Query the object information for each group ! if(H5Oget_info(group_id, &oinfo) < 0) TEST_ERROR ! if(H5Oget_info(group_id2, &oinfo2) < 0) TEST_ERROR -!!$ Sanity check object information for each group +!!$ Sanity check object information for each group !!$ if(oinfo.atime != 0) TEST_ERROR !!$ if(oinfo.mtime != 0) TEST_ERROR !!$ if(oinfo.ctime != 0) TEST_ERROR @@ -550,40 +550,40 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ if(oinfo.hdr.space.total >= oinfo2.hdr.space.total) TEST_ERROR !!$ if(oinfo.hdr.space.meta >= oinfo2.hdr.space.meta) TEST_ERROR - ! Close the property lists + ! Close the property lists CALL H5Pclose_f(gcpl_id, error) CALL check("H5Pclose_f", error, total_error) CALL H5Pclose_f(gcpl_id2, error) CALL check("H5Pclose_f", error, total_error) - ! Close the groups + ! Close the groups CALL H5Gclose_f(group_id, error) CALL check("H5Gclose_f", error, total_error) CALL H5Gclose_f(group_id2, error) CALL check("H5Gclose_f", error, total_error) - ! Close the file + ! Close the file CALL H5Fclose_f(file_id, error) CALL check("H5Fclose_f", error, total_error) - ! Re-open the file + ! Re-open the file CALL h5fopen_f(FileName, H5F_ACC_RDONLY_F, file_id, error, H5P_DEFAULT_F) CALL check("h5fopen_f",error,total_error) - ! Open groups + ! Open groups CALL H5Gopen_f(file_id, TIMESTAMP_GROUP_1, group_id, error) ! with no optional param. CALL check("H5Gopen_f", error, total_error) CALL H5Gopen_f(file_id, TIMESTAMP_GROUP_2, group_id2, error, H5P_DEFAULT_F) ! with optional param. CALL check("H5Gopen_f", error, total_error) - ! Retrieve the new groups' creation properties + ! Retrieve the new groups' creation properties CALL H5Gget_create_plist_f(group_id, gcpl_id, error) CALL check("H5Gget_create_plist", error, total_error) CALL H5Gget_create_plist_f(group_id2, gcpl_id2, error) CALL check("H5Gget_create_plist", error, total_error) - ! Query & verify the object timestamp settings + ! Query & verify the object timestamp settings CALL H5Pget_obj_track_times_f(gcpl_id, track_times, error) CALL check("H5Pget_obj_track_times_f", error, total_error) @@ -592,11 +592,11 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Pget_obj_track_times_f", error, total_error) CALL verify("H5Pget_obj_track_times2",track_times,.TRUE.,total_error) !!$ -!!$ Query the object information for each group +!!$ Query the object information for each group !!$ if(H5Oget_info(group_id, &oinfo) < 0) TEST_ERROR !!$ if(H5Oget_info(group_id2, &oinfo2) < 0) TEST_ERROR !!$ -!!$ Sanity check object information for each group +!!$ Sanity check object information for each group !!$ if(oinfo.atime != 0) TEST_ERROR !!$ if(oinfo.mtime != 0) TEST_ERROR !!$ if(oinfo.ctime != 0) TEST_ERROR @@ -610,19 +610,19 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ if(oinfo.hdr.space.total >= oinfo2.hdr.space.total) TEST_ERROR !!$ if(oinfo.hdr.space.meta >= oinfo2.hdr.space.meta) TEST_ERROR - ! Close the property lists + ! Close the property lists CALL H5Pclose_f(gcpl_id, error) CALL check("H5Pclose_f", error, total_error) CALL H5Pclose_f(gcpl_id2, error) CALL check("H5Pclose_f", error, total_error) - ! Close the groups + ! Close the groups CALL H5Gclose_f(group_id, error) CALL check("H5Gclose_f", error, total_error) CALL H5Gclose_f(group_id2, error) CALL check("H5Gclose_f", error, total_error) - ! Close the file + ! Close the file CALL H5Fclose_f(file_id, error) CALL check("H5Fclose_f", error, total_error) @@ -643,7 +643,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! * Modifications: ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE mklinks(fapl, total_error) @@ -671,29 +671,29 @@ SUBROUTINE group_info(cleanup, fapl, total_error) WRITE(*,*) "link creation (w/new group format)" - ! Create a file + ! Create a file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, file, error, H5P_DEFAULT_F, fapl) CALL check("mklinks.h5fcreate_f",error,total_error) CALL h5screate_simple_f(arank, adims2, scalar, error) CALL check("mklinks.h5screate_simple_f",error,total_error) - ! Create a group + ! Create a group CALL H5Gcreate_f(file, "grp1", grp, error) CALL check("H5Gcreate_f", error, total_error) CALL H5Gclose_f(grp, error) CALL check("h5gclose_f",error,total_error) - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(file, "d1", H5T_NATIVE_INTEGER, scalar, d1, error) CALL check("h5dcreate_f",error,total_error) CALL h5dclose_f(d1, error) CALL check("h5dclose_f",error,total_error) - ! Create a hard link + ! Create a hard link CALL H5Lcreate_hard_f(file, "d1", INT(H5L_SAME_LOC_F,HID_T), "grp1/hard", error) CALL check("H5Lcreate_hard_f", error, total_error) - ! Create a symbolic link + ! Create a symbolic link CALL H5Lcreate_soft_f("/d1", file, "grp1/soft",error) CALL check("H5Lcreate_soft_f", error, total_error) @@ -709,14 +709,14 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! should be '/d1' + NULL character = 4 CALL verify("H5Lget_info_by_idx_f", INT(val_size), 4, total_error) - ! Create a symbolic link to something that doesn't exist + ! Create a symbolic link to something that doesn't exist CALL H5Lcreate_soft_f("foobar", file, "grp1/dangle",error) - ! Create a recursive symbolic link + ! Create a recursive symbolic link CALL H5Lcreate_soft_f("/grp1/recursive", file, "/grp1/recursive",error) - ! Close + ! Close CALL h5sclose_f(scalar, error) CALL check("h5sclose_f",error,total_error) CALL h5fclose_f(file, error) @@ -736,7 +736,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! * Modifications: ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE test_move_preserves(fapl_id, total_error) @@ -746,20 +746,20 @@ SUBROUTINE group_info(cleanup, fapl, total_error) INTEGER(HID_T):: file_id INTEGER(HID_T):: group_id - INTEGER(HID_T):: fcpl_id ! Group creation property list ID + INTEGER(HID_T):: fcpl_id ! Group creation property list ID INTEGER(HID_T):: lcpl_id !H5O_info_t oinfo; !H5L_info_t linfo; INTEGER :: old_cset INTEGER :: old_corder !H5T_cset_t old_cset; - !int64_t old_corder; Creation order value of link + !int64_t old_corder; Creation order value of link !time_t old_modification_time; !time_t curr_time; - !unsigned crt_order_flags; Status of creation order info for GCPL + !unsigned crt_order_flags; Status of creation order info for GCPL !char filename[1024]; - INTEGER :: crt_order_flags ! Status of creation order info for GCPL + INTEGER :: crt_order_flags ! Status of creation order info for GCPL CHARACTER(LEN=12), PARAMETER :: filename = 'TestLinks.h5' INTEGER :: cset ! Indicates the character set used for the link’s name. @@ -779,7 +779,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! Create a file creation property list with creation order stored for links ! * in the root group - ! + ! CALL H5Pcreate_f(H5P_FILE_CREATE_F, fcpl_id, error) CALL check("H5Pcreate_f",error, total_error) @@ -795,26 +795,26 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Pget_link_creation_order_f",error, total_error) CALL verify("H5Pget_link_creation_order_f",crt_order_flags, H5P_CRT_ORDER_TRACKED_F, total_error) - ! Create file - ! (with creation order tracking for the root group) + ! Create file + ! (with creation order tracking for the root group) CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, file_id, error, fcpl_id, fapl_id) CALL check("h5fcreate_f",error,total_error) - ! Create a link creation property list with the UTF-8 character encoding + ! Create a link creation property list with the UTF-8 character encoding CALL H5Pcreate_f(H5P_LINK_CREATE_F, lcpl_id, error) CALL check("H5Pcreate_f",error, total_error) CALL H5Pset_char_encoding_f(lcpl_id, H5T_CSET_UTF8_F, error) CALL check("H5Pset_char_encoding_f",error, total_error) - ! Create a group with that lcpl + ! Create a group with that lcpl CALL H5Gcreate_f(file_id, "group", group_id, error,lcpl_id=lcpl_id, gcpl_id=H5P_DEFAULT_F, gapl_id=H5P_DEFAULT_F) CALL check("H5Gcreate_f", error, total_error) CALL H5Gclose_f(group_id, error) CALL check("H5Gclose_f", error, total_error) - ! Get the group's link's information + ! Get the group's link's information CALL H5Lget_info_f(file_id, "group", & cset, corder, f_corder_valid, link_type, token, val_size, & error, H5P_DEFAULT_F) @@ -830,18 +830,18 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! old_modification_time = oinfo.mtime; -! If this test happens too quickly, the times will all be the same. Make sure the time changes. +! If this test happens too quickly, the times will all be the same. Make sure the time changes. ! curr_time = HDtime(NULL); ! while(HDtime(NULL) <= curr_time) ! ; -! Close the file and reopen it +! Close the file and reopen it CALL H5Fclose_f(file_id, error) CALL check("H5Fclose_f", error, total_error) !!$ if((file_id = H5Fopen(filename, H5F_ACC_RDWR, fapl_id)) < 0) TEST_ERROR !!$ -!!$ Get the link's character set & modification time . They should be unchanged +!!$ Get the link's character set & modification time . They should be unchanged !!$ if(H5Lget_info(file_id, "group", &linfo, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(H5Oget_info_by_name(file_id, "group", &oinfo, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(old_modification_time != oinfo.mtime) TEST_ERROR @@ -849,7 +849,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ if(linfo.corder_valid != TRUE) TEST_ERROR !!$ if(old_corder != linfo.corder) TEST_ERROR !!$ -!!$ Create a new link to the group. It should have a different creation order value but the same modification time +!!$ Create a new link to the group. It should have a different creation order value but the same modification time !!$ if(H5Lcreate_hard(file_id, "group", file_id, "group2", H5P_DEFAULT, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(H5Oget_info_by_name(file_id, "group2", &oinfo, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(old_modification_time != oinfo.mtime) TEST_ERROR @@ -862,7 +862,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ Copy the first link to a UTF-8 name. !!$ * Its creation order value should be different, but modification time !!$ * should not change. -!!$ +!!$ !!$ if(H5Lcopy(file_id, "group", file_id, "group_copied", lcpl_id, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(H5Oget_info_by_name(file_id, "group_copied", &oinfo, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(old_modification_time != oinfo.mtime) TEST_ERROR @@ -870,10 +870,10 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ if(linfo.corder_valid != TRUE) TEST_ERROR !!$ if(linfo.corder != 2) TEST_ERROR !!$ -!!$ Check that its character encoding is UTF-8 +!!$ Check that its character encoding is UTF-8 !!$ if(linfo.cset != H5T_CSET_UTF8) TEST_ERROR !!$ -!!$ Move the link with the default property list. +!!$ Move the link with the default property list. !!$ if(H5Lmove(file_id, "group_copied", file_id, "group_copied2", H5P_DEFAULT, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(H5Oget_info_by_name(file_id, "group_copied2", &oinfo, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(old_modification_time != oinfo.mtime) TEST_ERROR @@ -881,10 +881,10 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ if(linfo.corder_valid != TRUE) TEST_ERROR !!$ if(linfo.corder != 3) TEST_ERROR !!$ -!!$ Check that its character encoding is not UTF-8 +!!$ Check that its character encoding is not UTF-8 !!$ if(linfo.cset == H5T_CSET_UTF8) TEST_ERROR !!$ -!!$ Check that the original link is unchanged +!!$ Check that the original link is unchanged !!$ if(H5Oget_info_by_name(file_id, "group", &oinfo, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(old_modification_time != oinfo.mtime) TEST_ERROR !!$ if(H5Lget_info(file_id, "group", &linfo, H5P_DEFAULT) < 0) TEST_ERROR @@ -894,7 +894,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ !!$ Move the first link to a UTF-8 name. !!$ * Its creation order value will change, but modification time should not -!!$ * change. +!!$ * change. !!$ if(H5Lmove(file_id, "group", file_id, "group_moved", lcpl_id, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(H5Oget_info_by_name(file_id, "group_moved", &oinfo, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(old_modification_time != oinfo.mtime) TEST_ERROR @@ -902,10 +902,10 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ if(linfo.corder_valid != TRUE) TEST_ERROR !!$ if(linfo.corder != 4) TEST_ERROR !!$ -!!$ Check that its character encoding is UTF-8 +!!$ Check that its character encoding is UTF-8 !!$ if(linfo.cset != H5T_CSET_UTF8) TEST_ERROR !!$ -!!$ Move the link again using the default property list. +!!$ Move the link again using the default property list. !!$ if(H5Lmove(file_id, "group_moved", file_id, "group_moved_again", H5P_DEFAULT, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(H5Oget_info_by_name(file_id, "group_moved_again", &oinfo, H5P_DEFAULT) < 0) TEST_ERROR !!$ if(old_modification_time != oinfo.mtime) TEST_ERROR @@ -913,10 +913,10 @@ SUBROUTINE group_info(cleanup, fapl, total_error) !!$ if(linfo.corder_valid != TRUE) TEST_ERROR !!$ if(linfo.corder != 5) TEST_ERROR !!$ -!!$ Check that its character encoding is not UTF-8 +!!$ Check that its character encoding is not UTF-8 !!$ if(linfo.cset == H5T_CSET_UTF8) TEST_ERROR - ! Close open IDs + ! Close open IDs CALL H5Pclose_f(fcpl_id, error) CALL check("H5Pclose_f", error, total_error) CALL H5Pclose_f(lcpl_id, error) @@ -941,7 +941,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! * Monday, October 17, 2005 ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE lifecycle(cleanup, fapl2, total_error) IMPLICIT NONE @@ -951,14 +951,14 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) INTEGER, PARAMETER :: NAME_BUF_SIZE =7 - INTEGER(HID_T) :: fid ! File ID - INTEGER(HID_T) :: gid ! Group ID - INTEGER(HID_T) :: gcpl ! Group creation property list ID - INTEGER(size_t) :: lheap_size_hint ! Local heap size hint - INTEGER :: max_compact ! Maximum # of links to store in group compactly - INTEGER :: min_dense ! Minimum # of links to store in group "densely" - INTEGER :: est_num_entries ! Estimated # of entries in group - INTEGER :: est_name_len ! Estimated length of entry name + INTEGER(HID_T) :: fid ! File ID + INTEGER(HID_T) :: gid ! Group ID + INTEGER(HID_T) :: gcpl ! Group creation property list ID + INTEGER(size_t) :: lheap_size_hint ! Local heap size hint + INTEGER :: max_compact ! Maximum # of links to store in group compactly + INTEGER :: min_dense ! Minimum # of links to store in group "densely" + INTEGER :: est_num_entries ! Estimated # of entries in group + INTEGER :: est_name_len ! Estimated length of entry name CHARACTER(LEN=NAME_BUF_SIZE) :: filename = 'fixx.h5' INTEGER(SIZE_T) :: LIFECYCLE_LOCAL_HEAP_SIZE_HINT = 256 INTEGER :: LIFECYCLE_MAX_COMPACT = 4 @@ -975,29 +975,29 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) ! WRITE(*,*) 'group lifecycle' - ! Create file + ! Create file CALL H5Fcreate_f(filename, H5F_ACC_TRUNC_F, fid, error, access_prp=fapl2) CALL check("H5Fcreate_f",error,total_error) - ! Close file + ! Close file CALL H5Fclose_f(fid,error) CALL check("H5Fclose_f",error,total_error) - ! Get size of file as empty + ! Get size of file as empty ! if((empty_size = h5_get_file_size(filename)) < 0) TEST_ERROR - ! Re-open file + ! Re-open file CALL H5Fopen_f(filename, H5F_ACC_RDWR_F, fid, error,access_prp=fapl2) CALL check("H5Fopen_f",error,total_error) - ! Set up group creation property list + ! Set up group creation property list CALL H5Pcreate_f(H5P_GROUP_CREATE_F,gcpl,error) CALL check("H5Pcreate_f",error,total_error) - ! Query default group creation property settings + ! Query default group creation property settings CALL H5Pget_local_heap_size_hint_f(gcpl, lheap_size_hint, error) CALL check("H5Pget_local_heap_size_hint_f",error,total_error) CALL verify("H5Pget_local_heap_size_hint_f", INT(lheap_size_hint),0,total_error) @@ -1014,7 +1014,7 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) CALL verify("H5Pget_est_link_info_f", est_name_len, H5G_CRT_GINFO_EST_NAME_LEN,total_error) - ! Set GCPL parameters + ! Set GCPL parameters CALL H5Pset_local_heap_size_hint_f(gcpl, LIFECYCLE_LOCAL_HEAP_SIZE_HINT, error) CALL check("H5Pset_local_heap_size_hint_f", error, total_error) @@ -1023,12 +1023,12 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) CALL H5Pset_est_link_info_f(gcpl, LIFECYCLE_EST_NUM_ENTRIES, LIFECYCLE_EST_NAME_LEN, error) CALL check("H5Pset_est_link_info_f", error, total_error) - ! Create group for testing lifecycle + ! Create group for testing lifecycle CALL H5Gcreate_f(fid, LIFECYCLE_TOP_GROUP, gid, error, gcpl_id=gcpl) CALL check("H5Gcreate_f", error, total_error) - ! Query group creation property settings + ! Query group creation property settings CALL H5Pget_local_heap_size_hint_f(gcpl, lheap_size_hint, error) CALL check("H5Pget_local_heap_size_hint_f",error,total_error) @@ -1046,20 +1046,20 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) - ! Close top group + ! Close top group CALL H5Gclose_f(gid, error) CALL check("H5Gclose_f", error, total_error) - ! Unlink top group + ! Unlink top group CALL H5Ldelete_f(fid, LIFECYCLE_TOP_GROUP, error) CALL check("H5Ldelete_f", error, total_error) - ! Close GCPL + ! Close GCPL CALL H5Pclose_f(gcpl, error) CALL check("H5Pclose_f", error, total_error) - ! Close file + ! Close file CALL H5Fclose_f(fid,error) CALL check("H5Fclose_f",error,total_error) @@ -1084,7 +1084,7 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) ! * Modifications: Modified original C code ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE cklinks(fapl, total_error) @@ -1104,25 +1104,25 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) LOGICAL :: Lexists - ! Open the file + ! Open the file CALL H5Fopen_f(filename, H5F_ACC_RDONLY_F, file, error,access_prp=fapl) CALL check("H5Fopen_f",error,total_error) - ! Hard link + ! Hard link !!$ IF(H5Oget_info_by_name(file, "d1", &oinfo1, H5P_DEFAULT) < 0) FAIL_STACK_ERROR !!$ IF(H5Oget_info_by_name(file, "grp1/hard", &oinfo2, H5P_DEFAULT) < 0) FAIL_STACK_ERROR !!$ IF(H5O_TYPE_DATASET != oinfo2.type) { !!$ H5_FAILED(); !!$ printf(" %d: Unexpected object type should have been a dataset\n", __LINE__); !!$ TEST_ERROR -!!$ } end if +!!$ } end if !!$ if(H5F_addr_ne(oinfo1.addr, oinfo2.addr)) { !!$ H5_FAILED(); !!$ puts(" Hard link test failed. Link seems not to point to the "); !!$ puts(" expected file location."); !!$ TEST_ERROR -!!$ } end if +!!$ } end if CALL H5Lexists_f(file,"d1",Lexists, error) @@ -1131,7 +1131,7 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) CALL H5Lexists_f(file,"grp1/hard",Lexists, error) CALL verify("H5Lexists", Lexists,.TRUE.,total_error) - ! Cleanup + ! Cleanup CALL H5Fclose_f(file,error) CALL check("H5Fclose_f",error,total_error) @@ -1153,25 +1153,25 @@ END SUBROUTINE cklinks ! * March 3, 2008 ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE delete_by_idx(cleanup, fapl, total_error) IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl - INTEGER(HID_T) :: file_id ! File ID - INTEGER(HID_T) :: group_id ! Group ID - INTEGER(HID_T) :: gcpl_id ! Group creation property list ID + INTEGER(HID_T) :: file_id ! File ID + INTEGER(HID_T) :: group_id ! Group ID + INTEGER(HID_T) :: gcpl_id ! Group creation property list ID - INTEGER :: idx_type ! Type of index to operate on + INTEGER :: idx_type ! Type of index to operate on LOGICAL, DIMENSION(1:2) :: use_index = (/.FALSE.,.TRUE./) - ! Use index on creation order values - INTEGER :: max_compact ! Maximum # of links to store in group compactly - INTEGER :: min_dense ! Minimum # of links to store in group "densely" + ! Use index on creation order values + INTEGER :: max_compact ! Maximum # of links to store in group compactly + INTEGER :: min_dense ! Minimum # of links to store in group "densely" - CHARACTER(LEN=7) :: objname ! Object name - CHARACTER(LEN=8) :: filename = 'file0.h5' ! File name + CHARACTER(LEN=7) :: objname ! Object name + CHARACTER(LEN=8) :: filename = 'file0.h5' ! File name CHARACTER(LEN=12), PARAMETER :: CORDER_GROUP_NAME = "corder_group" LOGICAL :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute @@ -1181,11 +1181,11 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) INTEGER :: link_type TYPE(H5O_TOKEN_T_F) :: token - INTEGER :: u ! Local index variable + INTEGER :: u ! Local index variable INTEGER :: Input1, i INTEGER(HID_T) :: group_id2 INTEGER(HID_T) :: grp - INTEGER :: iorder ! Order within in the index + INTEGER :: iorder ! Order within in the index CHARACTER(LEN=2) :: chr2 INTEGER :: error INTEGER :: id_type @@ -1203,13 +1203,13 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) fix_filename2(i:i) = " " ENDDO - ! Loop over operating on different indices on link fields + ! Loop over operating on different indices on link fields DO idx_type = H5_INDEX_NAME_F, H5_INDEX_CRT_ORDER_F - ! Loop over operating in different orders + ! Loop over operating in different orders DO iorder = H5_ITER_INC_F, H5_ITER_DEC_F - ! Loop over using index for creation order value + ! Loop over using index for creation order value DO i = 1, 2 - ! Print appropriate test message + ! Print appropriate test message !!$ IF(idx_type == H5_INDEX_CRT_ORDER_F)THEN !!$ IF(iorder == H5_ITER_INC_F)THEN !!$ IF(use_index(i))THEN @@ -1240,15 +1240,15 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) !!$ ENDIF !!$ ENDIF - ! Create file + ! Create file CALL H5Fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error, access_prp=fapl) CALL check("delete_by_idx.H5Fcreate_f", error, total_error) - ! Create group creation property list + ! Create group creation property list CALL H5Pcreate_f(H5P_GROUP_CREATE_F, gcpl_id, error ) CALL check("delete_by_idx.H5Pcreate_f", error, total_error) - ! Set creation order tracking & indexing on group + ! Set creation order tracking & indexing on group IF(use_index(i))THEN Input1 = H5P_CRT_ORDER_INDEXED_F ELSE @@ -1258,54 +1258,54 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) CALL H5Pset_link_creation_order_f(gcpl_id, IOR(H5P_CRT_ORDER_TRACKED_F, Input1), error) CALL check("delete_by_idx.H5Pset_link_creation_order_f", error, total_error) - ! Create group with creation order tracking on + ! Create group with creation order tracking on CALL H5Gcreate_f(file_id, CORDER_GROUP_NAME, group_id, error, gcpl_id=gcpl_id) CALL check("delete_by_idx.H5Gcreate_f", error, total_error) - ! Query the group creation properties + ! Query the group creation properties CALL H5Pget_link_phase_change_f(gcpl_id, max_compact, min_dense, error) CALL check("delete_by_idx.H5Pget_link_phase_change_f", error, total_error) - ! Delete links from one end + ! Delete links from one end - ! Check for deletion on empty group + ! Check for deletion on empty group CALL H5Ldelete_by_idx_f(group_id, ".", idx_type, iorder, INT(0,HSIZE_T), error) CALL verify("delete_by_idx.H5Ldelete_by_idx_f", error, -1, total_error) ! test should fail (error = -1) - ! Create several links, up to limit of compact form + ! Create several links, up to limit of compact form DO u = 0, max_compact-1 - ! Make name for link + ! Make name for link WRITE(chr2,'(I2.2)') u objname = 'fill '//chr2 - ! Create hard link, with group object + ! Create hard link, with group object CALL H5Gcreate_f(group_id, objname, group_id2, error) CALL check("delete_by_idx.H5Gcreate_f", error, total_error) CALL H5Gclose_f(group_id2, error) CALL check("delete_by_idx.H5Gclose_f", error, total_error) - ! Verify link information for new link + ! Verify link information for new link CALL link_info_by_idx_check(group_id, objname, u, & .TRUE., use_index(i), total_error) ENDDO - ! Verify state of group (compact) + ! Verify state of group (compact) ! IF(H5G_has_links_test(group_id, NULL) != TRUE) TEST_ERROR - ! Check for out of bound deletion + ! Check for out of bound deletion htmp =9 !EP CALL H5Ldelete_by_idx_f(group_id, ".", idx_type, iorder, INT(u,HSIZE_T), error) CALL H5Ldelete_by_idx_f(group_id, ".", idx_type, iorder, htmp, error) CALL verify("H5Ldelete_by_idx_f", error, -1, total_error) ! test should fail (error = -1) - ! Delete links from compact group + ! Delete links from compact group DO u = 0, (max_compact - 1) -1 - ! Delete first link in appropriate order + ! Delete first link in appropriate order CALL H5Ldelete_by_idx_f(group_id, ".", idx_type, iorder, INT(0,HSIZE_T), error) CALL check("H5Ldelete_by_idx_f", error, total_error) - ! Verify the link information for first link in appropriate order + ! Verify the link information for first link in appropriate order ! HDmemset(&linfo, 0, sizeof(linfo)); CALL H5Lget_info_by_idx_f(group_id, ".", idx_type, iorder, INT(0,HSIZE_T), & @@ -1335,7 +1335,7 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) - ! Verify the name for first link in appropriate order + ! Verify the name for first link in appropriate order ! HDmemset(tmpname, 0, (size_t)NAME_BUF_SIZE); !!$ size_tmp = 20 !!$ CALL H5Lget_name_by_idx_f(group_id, ".", idx_type, order, INT(0,HSIZE_T), size_tmp, tmpname, error) @@ -1351,15 +1351,15 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) !!$ CALL verify("delete_by_idx.H5Lget_name_by_idx_f", objname, tmpname, total_error) ENDDO - ! Close the group + ! Close the group CALL H5Gclose_f(group_id, error) CALL check("delete_by_idx.H5Gclose_f", error, total_error) - ! Close the group creation property list + ! Close the group creation property list CALL H5Pclose_f(gcpl_id, error) CALL check("delete_by_idx.H5Pclose_f", error, total_error) - ! Close the file + ! Close the file CALL H5Fclose_f(file_id, error) CALL check("delete_by_idx.H5Fclose_f", error, total_error) @@ -1391,7 +1391,7 @@ END SUBROUTINE delete_by_idx ! * Tuesday, November 7, 2006 ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & hard_link, use_index, total_error) @@ -1410,35 +1410,35 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & TYPE(H5O_TOKEN_T_F) :: token INTEGER(SIZE_T) :: val_size ! Indicates the size, in the number of characters, of the attribute - CHARACTER(LEN=7) :: tmpname ! Temporary link name - CHARACTER(LEN=3) :: tmpname_small ! to small temporary link name - CHARACTER(LEN=10) :: tmpname_big ! to big temporary link name + CHARACTER(LEN=7) :: tmpname ! Temporary link name + CHARACTER(LEN=3) :: tmpname_small ! to small temporary link name + CHARACTER(LEN=10) :: tmpname_big ! to big temporary link name - CHARACTER(LEN=7) :: valname ! Link value name + CHARACTER(LEN=7) :: valname ! Link value name CHARACTER(LEN=2) :: chr2 INTEGER(SIZE_T) :: size_tmp INTEGER :: error - ! Make link value for increasing/native order queries + ! Make link value for increasing/native order queries WRITE(chr2,'(I2.2)') n valname = 'valn.'//chr2 - ! Verify the link information for first link, in increasing creation order + ! Verify the link information for first link, in increasing creation order ! HDmemset(&linfo, 0, sizeof(linfo)); CALL H5Lget_info_by_idx_f(group_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(0,HSIZE_T), & link_type, f_corder_valid, corder, cset, token, val_size, error) CALL check("H5Lget_info_by_idx_f", error, total_error) CALL verify("H5Lget_info_by_idx_f", corder, 0, total_error) - ! Verify the link information for new link, in increasing creation order + ! Verify the link information for new link, in increasing creation order ! HDmemset(&linfo, 0, sizeof(linfo)); CALL H5Lget_info_by_idx_f(group_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(n,HSIZE_T), & link_type, f_corder_valid, corder, cset, token, val_size, error) CALL check("H5Lget_info_by_idx_f", error, total_error) CALL verify("H5Lget_info_by_idx_f", corder, n, total_error) - ! Verify value for new soft link, in increasing creation order + ! Verify value for new soft link, in increasing creation order !!$ IF(hard_link)THEN !!$ ! HDmemset(tmpval, 0, (size_t)NAME_BUF_SIZE); !!$ @@ -1448,7 +1448,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & !!$! IF(HDstrcmp(valname, tmpval)) TEST_ERROR !!$ ENDIF - ! Verify the name for new link, in increasing creation order + ! Verify the name for new link, in increasing creation order ! HDmemset(tmpname, 0, (size_t)NAME_BUF_SIZE); ! The actual size of tmpname should be 7 @@ -1492,7 +1492,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & ! * Modifications: ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE test_lcpl(cleanup, fapl, total_error) @@ -1537,34 +1537,34 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & ! Actually, intermediate group creation is tested elsewhere (tmisc). - ! * Here we only need to test the character encoding property + ! * Here we only need to test the character encoding property - ! Create file + ! Create file ! h5_fixname(FILENAME[0], fapl, filename, sizeof filename); CALL H5Fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error, H5P_DEFAULT_F, fapl) CALL check("H5Fcreate_f", error, total_error) - ! Create and link a group with the default LCPL + ! Create and link a group with the default LCPL CALL H5Gcreate_f(file_id, "/group", group_id, error) CALL check("H5Gcreate_f", error, total_error) - ! Check that its character encoding is the default + ! Check that its character encoding is the default CALL H5Lget_info_f(file_id, "group", & cset, corder, f_corder_valid, link_type, token, val_size, & error, H5P_DEFAULT_F) ! File-wide default character encoding can not yet be set via the file -! * creation property list and is always ASCII. +! * creation property list and is always ASCII. !#define H5F_DEFAULT_CSET H5T_CSET_ASCII -- FROM H5Fprivate.h -- CALL verify("H5Lget_info_f",cset, H5T_CSET_ASCII_F,total_error) - ! Create and commit a datatype with the default LCPL + ! Create and commit a datatype with the default LCPL CALL h5tcopy_f(H5T_NATIVE_INTEGER, type_id, error) CALL check("h5tcopy_f",error,total_error) CALL h5tcommit_f(file_id, "/type", type_id, error) @@ -1573,19 +1573,19 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL check("h5tclose_f", error, total_error) - ! Check that its character encoding is the default + ! Check that its character encoding is the default CALL H5Lget_info_f(file_id, "type", & cset, corder, f_corder_valid, link_type, token, val_size, & error) CALL check("h5tclose_f", error, total_error) ! File-wide default character encoding can not yet be set via the file -! * creation property list and is always ASCII. +! * creation property list and is always ASCII. !#define H5F_DEFAULT_CSET H5T_CSET_ASCII -- FROM H5Fprivate.h -- CALL verify("H5Lget_info_f",cset, H5T_CSET_ASCII_F,total_error) - ! Create a dataspace + ! Create a dataspace CALL h5screate_simple_f(2, dims, space_id, error) CALL check("h5screate_simple_f",error,total_error) CALL h5pcreate_f(H5P_DATASET_CREATE_F, crp_list, error) @@ -1595,7 +1595,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL h5pcreate_f(H5P_DATASET_CREATE_F, crp_list, error) CALL h5pset_chunk_f(crp_list, 2, dims, error) - ! Create a dataset using the default LCPL + ! Create a dataset using the default LCPL CALL h5dcreate_f(file_id, "/dataset", H5T_NATIVE_INTEGER, space_id, dset_id, error, crp_list) CALL check("h5dcreate_f", error, total_error) @@ -1607,10 +1607,10 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL H5Dopen_f(file_id, "/dataset", dset_id, error) CALL check("h5dopen_f", error, total_error) - ! Extend the dataset + ! Extend the dataset CALL H5Dset_extent_f(dset_id, extend_dim, error) CALL check("H5Dset_extent_f", error, total_error) - ! Verify the dataspaces + ! Verify the dataspaces ! !Get dataset's dataspace handle. ! @@ -1629,37 +1629,37 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL verify("H5Sget_simple_extent_dims", tmp1, tmp2, total_error) ENDDO - ! close data set + ! close data set CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f", error, total_error) - ! Check that its character encoding is the default + ! Check that its character encoding is the default CALL H5Lget_info_f(file_id, "dataset", & cset, corder, f_corder_valid, link_type, token, val_size, & error) CALL check("H5Lget_info_f", error, total_error) ! File-wide default character encoding can not yet be set via the file -! * creation property list and is always ASCII. +! * creation property list and is always ASCII. !#define H5F_DEFAULT_CSET H5T_CSET_ASCII -- FROM H5Fprivate.h -- CALL verify("h5tclose_f",cset, H5T_CSET_ASCII_F,total_error) - ! Create a link creation property list with the UTF-8 character encoding + ! Create a link creation property list with the UTF-8 character encoding CALL H5Pcreate_f(H5P_LINK_CREATE_F,lcpl_id,error) CALL check("h5Pcreate_f",error,total_error) CALL H5Pset_char_encoding_f(lcpl_id, H5T_CSET_UTF8_F, error) CALL check("H5Pset_char_encoding_f",error, total_error) - ! Create and link a group with the new LCPL + ! Create and link a group with the new LCPL CALL H5Gcreate_f(file_id, "/group2", group_id, error,lcpl_id=lcpl_id) CALL check("H5Gcreate_f", error, total_error) CALL H5Gclose_f(group_id, error) CALL check("H5Gclose_f", error, total_error) - ! Check that its character encoding is UTF-8 + ! Check that its character encoding is UTF-8 CALL H5Lget_info_f(file_id, "group2", & cset, corder, f_corder_valid, link_type, token, val_size, & error) @@ -1667,7 +1667,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL verify("H5Lget_info_f",cset, H5T_CSET_UTF8_F,total_error) - ! Create and commit a datatype with the new LCPL + ! Create and commit a datatype with the new LCPL CALL h5tcopy_f(H5T_NATIVE_INTEGER, type_id, error) CALL check("h5tcopy_f",error,total_error) @@ -1677,14 +1677,14 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL check("h5tclose_f", error, total_error) - ! Check that its character encoding is UTF-8 + ! Check that its character encoding is UTF-8 CALL H5Lget_info_f(file_id, "type2", & cset, corder, f_corder_valid, link_type, token, val_size, & error) CALL check("H5Lget_info_f", error, total_error) CALL verify("H5Lget_info_f",cset, H5T_CSET_UTF8_F,total_error) - ! Create a dataset using the new LCPL + ! Create a dataset using the new LCPL CALL h5dcreate_f(file_id, "/dataset2", H5T_NATIVE_INTEGER, space_id, dset_id, error,lcpl_id=lcpl_id) CALL check("h5dcreate_f", error, total_error) @@ -1695,14 +1695,14 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL check("H5Pget_char_encoding_f", error, total_error) CALL verify("H5Pget_char_encoding_f", encoding, H5T_CSET_UTF8_F, total_error) - ! Check that its character encoding is UTF-8 + ! Check that its character encoding is UTF-8 CALL H5Lget_info_f(file_id, "dataset2", & cset, corder, f_corder_valid, link_type, token, val_size, & error) CALL check("H5Lget_info_f", error, total_error) CALL verify("H5Lget_info_f2",cset, H5T_CSET_UTF8_F,total_error) - ! Create a new link to the dataset with a different character encoding. + ! Create a new link to the dataset with a different character encoding. CALL H5Pclose_f(lcpl_id, error) CALL check("H5Pclose_f", error, total_error) @@ -1717,14 +1717,14 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL check("H5Lexists",error, total_error) CALL verify("H5Lexists", Lexists,.TRUE.,total_error) - ! Check that its character encoding is ASCII + ! Check that its character encoding is ASCII CALL H5Lget_info_f(file_id, "/dataset2_link", & cset, corder, f_corder_valid, link_type, token, val_size, & error) CALL check("H5Lget_info_f", error, total_error) CALL verify("H5Lget_info_f",cset, H5T_CSET_ASCII_F,total_error) - ! Check that the first link's encoding hasn't changed + ! Check that the first link's encoding hasn't changed CALL H5Lget_info_f(file_id, "/dataset2", & cset, corder, f_corder_valid, link_type, token, val_size, & @@ -1733,8 +1733,8 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL verify("H5Lget_info_f3",cset, H5T_CSET_UTF8_F,total_error) - ! Make sure that LCPLs work properly for other API calls: - ! H5Lcreate_soft + ! Make sure that LCPLs work properly for other API calls: + ! H5Lcreate_soft CALL H5Pset_char_encoding_f(lcpl_id, H5T_CSET_UTF8_F, error) CALL check("H5Pset_char_encoding_f",error, total_error) @@ -1748,7 +1748,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL verify("H5Lget_info_f",cset, H5T_CSET_UTF8_F,total_error) - ! H5Lmove + ! H5Lmove CALL H5Pset_char_encoding_f(lcpl_id, H5T_CSET_ASCII_F, error) CALL check("H5Pset_char_encoding_f",error, total_error) @@ -1762,7 +1762,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL verify("H5Lget_info_f",cset, H5T_CSET_ASCII_F,total_error) - ! H5Lcopy + ! H5Lcopy CALL H5Pset_char_encoding_f(lcpl_id, H5T_CSET_UTF8_F, error) CALL check("H5Pset_char_encoding_f",error, total_error) @@ -1776,7 +1776,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL verify("H5Lget_info_f",cset, H5T_CSET_UTF8_F,total_error) - ! H5Lcreate_external + ! H5Lcreate_external CALL H5Lcreate_external_f("filename", "path", file_id, "extlink", error, lcpl_id) CALL check("H5Lcreate_external_f", error, total_error) @@ -1788,7 +1788,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL verify("H5Lget_info_f",cset, H5T_CSET_UTF8_F,total_error) - ! Close open IDs + ! Close open IDs CALL H5Pclose_f(lcpl_id, error) CALL check("H5Pclose_f", error, total_error) @@ -1817,22 +1817,22 @@ SUBROUTINE objcopy(fapl, total_error) flag = H5O_COPY_SHALLOW_HIERARCHY_F -! Copy the file access property list +! Copy the file access property list CALL H5Pcopy_f(fapl, fapl2, error) CALL check("H5Pcopy_f", error, total_error) -! Set the "use the latest version of the format" bounds for creating objects in the file +! Set the "use the latest version of the format" bounds for creating objects in the file CALL H5Pset_libver_bounds_f(fapl2, H5F_LIBVER_LATEST_F, H5F_LIBVER_LATEST_F, error) - ! create property to pass copy options + ! create property to pass copy options CALL h5pcreate_f(H5P_OBJECT_COPY_F, pid, error) CALL check("h5pcreate_f",error, total_error) - ! set options for object copy + ! set options for object copy CALL H5Pset_copy_object_f(pid, flag, error) CALL check("H5Pset_copy_object_f",error, total_error) - ! Verify object copy flags + ! Verify object copy flags CALL H5Pget_copy_object_f(pid, cpy_flags, error) CALL check("H5Pget_copy_object_f",error, total_error) CALL verify("H5Pget_copy_object_f", cpy_flags, flag, total_error) @@ -1862,7 +1862,7 @@ END SUBROUTINE objcopy ! * Modifications: ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE lapl_nlinks( fapl, total_error) @@ -1872,30 +1872,30 @@ SUBROUTINE lapl_nlinks( fapl, total_error) INTEGER :: error - INTEGER(HID_T) :: fid = (-1) ! File ID - INTEGER(HID_T) :: gid = (-1), gid2 = (-1) ! Group IDs - INTEGER(HID_T) :: plist = (-1) ! lapl ID - INTEGER(HID_T) :: tid = (-1) ! Other IDs - INTEGER(HID_T) :: gapl = (-1), dapl = (-1), tapl = (-1) ! Other property lists + INTEGER(HID_T) :: fid = (-1) ! File ID + INTEGER(HID_T) :: gid = (-1), gid2 = (-1) ! Group IDs + INTEGER(HID_T) :: plist = (-1) ! lapl ID + INTEGER(HID_T) :: tid = (-1) ! Other IDs + INTEGER(HID_T) :: gapl = (-1), dapl = (-1), tapl = (-1) ! Other property lists - CHARACTER(LEN=7) :: objname ! Object name - INTEGER(size_t) :: name_len ! Length of object name + CHARACTER(LEN=7) :: objname ! Object name + INTEGER(size_t) :: name_len ! Length of object name CHARACTER(LEN=12) :: filename = 'TestLinks.h5' - INTEGER(size_t) :: nlinks ! nlinks for H5Pset_nlinks + INTEGER(size_t) :: nlinks ! nlinks for H5Pset_nlinks INTEGER(size_t) :: buf_size = 7 ! WRITE(*,*) "adjusting nlinks with LAPL (w/new group format)" - ! Create file + ! Create file CALL h5fcreate_f(FileName, H5F_ACC_TRUNC_F, fid, error, access_prp=fapl) CALL check(" lapl_nlinks.h5fcreate_f",error,total_error) - ! Create group with short name in file (used as target for links) + ! Create group with short name in file (used as target for links) CALL H5Gcreate_f(fid, "final", gid, error) CALL check(" lapl_nlinks.H5Gcreate_f", error, total_error) - ! Create chain of soft links to existing object (limited) + ! Create chain of soft links to existing object (limited) CALL H5Lcreate_soft_f("final", fid, "soft1", error) CALL H5Lcreate_soft_f("soft1", fid, "soft2", error) CALL H5Lcreate_soft_f("soft2", fid, "soft3", error) @@ -1914,26 +1914,26 @@ SUBROUTINE lapl_nlinks( fapl, total_error) CALL H5Lcreate_soft_f("soft15", fid, "soft16", error) CALL H5Lcreate_soft_f("soft16", fid, "soft17", error) - ! Close objects + ! Close objects CALL H5Gclose_f(gid, error) CALL check("h5gclose_f",error,total_error) CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Open file + ! Open file CALL h5fopen_f(FileName, H5F_ACC_RDWR_F, fid, error, fapl) CALL check("h5open_f",error,total_error) - ! Create LAPL with higher-than-usual nlinks value - ! Create a non-default lapl with udata set to point to the first group + ! Create LAPL with higher-than-usual nlinks value + ! Create a non-default lapl with udata set to point to the first group CALL H5Pcreate_f(H5P_LINK_ACCESS_F,plist,error) CALL check("h5Pcreate_f",error,total_error) nlinks = 20 CALL H5Pset_nlinks_f(plist, nlinks, error) CALL check("H5Pset_nlinks_f",error,total_error) - ! Ensure that nlinks was set successfully + ! Ensure that nlinks was set successfully nlinks = 0 CALL H5Pget_nlinks_f(plist, nlinks, error) CALL check("H5Pset_nlinks_f",error,total_error) @@ -1941,71 +1941,71 @@ SUBROUTINE lapl_nlinks( fapl, total_error) ! Open object through what is normally too many soft links using - ! * new property list + ! * new property list CALL H5Oopen_f(fid,"soft17",gid,error,plist) CALL check("H5Oopen_f",error,total_error) - ! Check name + ! Check name CALL h5iget_name_f(gid, objname, buf_size, name_len, error) CALL check("h5iget_name_f",error,total_error) CALL verify("h5iget_name_f", TRIM(objname),"/soft17", total_error) - ! Create group using soft link + ! Create group using soft link CALL H5Gcreate_f(gid, "new_soft", gid2, error) CALL check("H5Gcreate_f", error, total_error) - ! Close groups + ! Close groups CALL H5Gclose_f(gid2, error) CALL check("H5Gclose_f", error, total_error) CALL H5Gclose_f(gid, error) CALL check("H5Gclose_f", error, total_error) - ! Set nlinks to a smaller number + ! Set nlinks to a smaller number nlinks = 4 CALL H5Pset_nlinks_f(plist, nlinks, error) CALL check("H5Pset_nlinks_f", error, total_error) - ! Ensure that nlinks was set successfully + ! Ensure that nlinks was set successfully nlinks = 0 CALL H5Pget_nlinks_f(plist, nlinks, error) CALL check("H5Pget_nlinks_f",error,total_error) CALL verify("H5Pget_nlinks_f", INT(nlinks), 4, total_error) - ! Try opening through what is now too many soft links + ! Try opening through what is now too many soft links CALL H5Oopen_f(fid,"soft5",gid,error,plist) CALL verify("H5Oopen_f", error, -1, total_error) ! should fail - ! Open object through lesser soft link + ! Open object through lesser soft link CALL H5Oopen_f(fid,"soft4",gid,error,plist) CALL check("H5Oopen_",error,total_error) - ! Check name + ! Check name CALL h5iget_name_f(gid, objname, buf_size, name_len, error) CALL check("h5iget_name_f",error,total_error) CALL verify("h5iget_name_f", TRIM(objname),"/soft4", total_error) - ! Test other functions that should use a LAPL + ! Test other functions that should use a LAPL nlinks = 20 CALL H5Pset_nlinks_f(plist, nlinks, error) CALL check("H5Pset_nlinks_f", error, total_error) ! Try copying and moving when both src and dst contain many soft links ! * using a non-default LAPL - ! + ! CALL H5Lcopy_f(fid, "soft17", fid, "soft17/newer_soft", error, H5P_DEFAULT_F, plist) CALL check("H5Lcopy_f",error,total_error) CALL H5Lmove_f(fid, "soft17/newer_soft", fid, "soft17/newest_soft", error, lapl_id=plist) CALL check("H5Lmove_f",error, total_error) - ! H5Olink + ! H5Olink CALL H5Olink_f(gid, fid, "soft17/link_to_group", error, H5P_DEFAULT_F, plist) CALL check("H5Olink_f", error, total_error) - ! H5Lcreate_hard and H5Lcreate_soft + ! H5Lcreate_hard and H5Lcreate_soft CALL H5Lcreate_hard_f(fid, "soft17", fid, "soft17/link2_to_group", error, H5P_DEFAULT_F, plist) CALL check("H5Lcreate_hard_f", error, total_error) @@ -2013,27 +2013,27 @@ SUBROUTINE lapl_nlinks( fapl, total_error) CALL H5Lcreate_soft_f("/soft4", fid, "soft17/soft_link",error, H5P_DEFAULT_F, plist) CALL check("H5Lcreate_soft_f", error, total_error) - ! H5Ldelete + ! H5Ldelete CALL h5ldelete_f(fid, "soft17/soft_link", error, plist) CALL check("H5Ldelete_f", error, total_error) -!!$ H5Lget_val and H5Lget_info +!!$ H5Lget_val and H5Lget_info !!$ if(H5Lget_val(fid, "soft17", NULL, (size_t)0, plist) < 0) TEST_ERROR !!$ if(H5Lget_info(fid, "soft17", NULL, plist) < 0) TEST_ERROR !!$ - ! H5Lcreate_external and H5Lcreate_ud + ! H5Lcreate_external and H5Lcreate_ud CALL H5Lcreate_external_f("filename", "path", fid, "soft17/extlink", error, H5P_DEFAULT_F, plist) CALL check("H5Lcreate_external_f", error, total_error) !!$ if(H5Lregister(UD_rereg_class) < 0) TEST_ERROR !!$ if(H5Lcreate_ud(fid, "soft17/udlink", UD_HARD_TYPE, NULL, (size_t)0, H5P_DEFAULT, plist) < 0) TEST_ERROR !!$ - ! Close plist + ! Close plist CALL h5pclose_f(plist, error) CALL check("h5pclose_f", error, total_error) - ! Create a datatype and dataset as targets inside the group + ! Create a datatype and dataset as targets inside the group CALL h5tcopy_f(H5T_NATIVE_INTEGER, tid, error) CALL check("h5tcopy_f",error,total_error) CALL h5tcommit_f(gid, "datatype", tid, error) @@ -2048,12 +2048,12 @@ SUBROUTINE lapl_nlinks( fapl, total_error) !!$ if((did = H5Dcreate2(gid, "dataset", H5T_NATIVE_INT, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR !!$ if(H5Dclose(did) < 0) TEST_ERROR !!$ - ! Close group + ! Close group CALL h5gclose_f(gid, error) CALL check("h5gclose_f",error,total_error) !!$ -!!$ Try to open the objects using too many symlinks with default *APLs +!!$ Try to open the objects using too many symlinks with default *APLs !!$ H5E_BEGIN_TRY { !!$ if((gid = H5Gopen2(fid, "soft17", H5P_DEFAULT)) >= 0) !!$ FAIL_PUTS_ERROR(" Should have failed for too many nested links.") @@ -2063,7 +2063,7 @@ SUBROUTINE lapl_nlinks( fapl, total_error) !!$ FAIL_PUTS_ERROR(" Should have failed for too many nested links.") !!$ } H5E_END_TRY !!$ - ! Create property lists with nlinks set + ! Create property lists with nlinks set CALL H5Pcreate_f(H5P_GROUP_ACCESS_F,gapl,error) CALL check("h5Pcreate_f",error,total_error) @@ -2083,7 +2083,7 @@ SUBROUTINE lapl_nlinks( fapl, total_error) ! We should now be able to use these property lists to open each kind ! * of object. - ! + ! CALL H5Gopen_f(fid, "soft17", gid, error, gapl) CALL check("H5Gopen_f",error,total_error) @@ -2093,7 +2093,7 @@ SUBROUTINE lapl_nlinks( fapl, total_error) !!$ if((did = H5Dopen2(fid, "soft17/dataset", dapl)) < 0) TEST_ERROR - ! Close objects + ! Close objects CALL h5gclose_f(gid, error) CALL check("h5gclose_f",error,total_error) @@ -2102,7 +2102,7 @@ SUBROUTINE lapl_nlinks( fapl, total_error) !!$ if(H5Dclose(did) < 0) TEST_ERROR !!$ - ! Close plists + ! Close plists CALL h5pclose_f(gapl, error) CALL check("h5pclose_f", error, total_error) @@ -2111,11 +2111,11 @@ SUBROUTINE lapl_nlinks( fapl, total_error) !!$ if(H5Pclose(dapl) < 0) TEST_ERROR !!$ -!!$ Unregister UD hard link class +!!$ Unregister UD hard link class !!$ if(H5Lunregister(UD_HARD_TYPE) < 0) TEST_ERROR !!$ - ! Close file + ! Close file CALL H5Fclose_f(fid, error) CALL check("H5Fclose_f", error, total_error) diff --git a/fortran/test/tH5I.F90 b/fortran/test/tH5I.F90 index 5ce37fd..1934acf 100644 --- a/fortran/test/tH5I.F90 +++ b/fortran/test/tH5I.F90 @@ -25,8 +25,8 @@ ! !***** MODULE TH5I - - USE HDF5 ! This module contains all necessary modules + + USE HDF5 ! This module contains all necessary modules USE TH5_MISC USE TH5_MISC_GEN @@ -87,21 +87,21 @@ CONTAINS ! check that the ID is not valid dtype = -1 CALL H5Iis_valid_f(dtype, tri_ret, error) - CALL check("H5Iis_valid_f", error, total_error) + CALL check("H5Iis_valid_f", error, total_error) CALL verify("H5Iis_valid_f", tri_ret, .FALSE., total_error) - + ! Create a datatype id CALL H5Tcopy_f(H5T_NATIVE_INTEGER,dtype,error) - CALL check("H5Tcopy_f", error, total_error) - + CALL check("H5Tcopy_f", error, total_error) + ! Check that the ID is valid CALL H5Iis_valid_f(dtype, tri_ret, error) - CALL check("H5Iis_valid_f", error, total_error) + CALL check("H5Iis_valid_f", error, total_error) CALL verify("H5Tequal_f", tri_ret, .TRUE., total_error) - + CALL H5Tclose_f(dtype, error) - CALL check("H5Tclose_f", error, total_error) - + CALL check("H5Tclose_f", error, total_error) + ! ! Create a new file using default properties. ! diff --git a/fortran/test/tH5L_F03.F90 b/fortran/test/tH5L_F03.F90 index bdb5c55..a8a8c65 100644 --- a/fortran/test/tH5L_F03.F90 +++ b/fortran/test/tH5L_F03.F90 @@ -5,7 +5,7 @@ ! ! FUNCTION ! Test FORTRAN HDF5 H5L APIs which are dependent on FORTRAN 2003 -! features. +! features. ! ! COPYRIGHT ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -30,8 +30,8 @@ !***** MODULE liter_cb_mod - USE HDF5 - USE TH5_MISC + USE HDF5 + USE TH5_MISC USE TH5_MISC_GEN USE, INTRINSIC :: ISO_C_BINDING IMPLICIT NONE @@ -43,11 +43,11 @@ MODULE liter_cb_mod INTEGER RET_CHANGE2 END TYPE iter_enum - ! Custom group iteration callback data + ! Custom group iteration callback data TYPE, bind(c) :: iter_info - CHARACTER(KIND=C_CHAR), DIMENSION(1:10) :: name ! The name of the object - INTEGER(c_int) :: TYPE ! The TYPE of the object - INTEGER(c_int) :: command ! The TYPE of RETURN value + CHARACTER(KIND=C_CHAR), DIMENSION(1:10) :: name ! The name of the object + INTEGER(c_int) :: TYPE ! The TYPE of the object + INTEGER(c_int) :: command ! The TYPE of RETURN value END TYPE iter_info CONTAINS @@ -73,7 +73,7 @@ CONTAINS INTEGER, SAVE :: count INTEGER, SAVE :: count2 -!!$ +!!$ !!$ iter_info *info = (iter_info *)op_data; !!$ static int count = 0; !!$ static int count2 = 0; @@ -126,17 +126,17 @@ SUBROUTINE test_iter_group(total_error) INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T) :: fapl - INTEGER(HID_T) :: file ! File ID - INTEGER(hid_t) :: dataset ! Dataset ID - INTEGER(hid_t) :: datatype ! Common datatype ID - INTEGER(hid_t) :: filespace ! Common dataspace ID - INTEGER(hid_t) :: grp ! Group ID - INTEGER i,j ! counting variable - INTEGER(hsize_t) idx ! Index in the group + INTEGER(HID_T) :: file ! File ID + INTEGER(hid_t) :: dataset ! Dataset ID + INTEGER(hid_t) :: datatype ! Common datatype ID + INTEGER(hid_t) :: filespace ! Common dataspace ID + INTEGER(hid_t) :: grp ! Group ID + INTEGER i,j ! counting variable + INTEGER(hsize_t) idx ! Index in the group CHARACTER(LEN=11) :: DATAFILE = "titerate.h5" INTEGER, PARAMETER :: ndatasets = 50 - CHARACTER(LEN=10) :: name ! temporary name buffer - CHARACTER(LEN=10), DIMENSION(1:ndatasets+2) :: lnames ! Names of the links created + CHARACTER(LEN=10) :: name ! temporary name buffer + CHARACTER(LEN=10), DIMENSION(1:ndatasets+2) :: lnames ! Names of the links created TYPE(iter_info), TARGET :: info @@ -147,15 +147,15 @@ SUBROUTINE test_iter_group(total_error) CHARACTER(LEN=2) :: ichr2 CHARACTER(LEN=10) :: ichr10 - ! Get the default FAPL + ! Get the default FAPL CALL H5Pcreate_f(H5P_FILE_ACCESS_F, fapl, error) CALL check("h5pcreate_f", error, total_error) - ! Set the "use the latest version of the format" bounds for creating objects in the file + ! Set the "use the latest version of the format" bounds for creating objects in the file CALL H5Pset_libver_bounds_f(fapl, H5F_LIBVER_LATEST_F, H5F_LIBVER_LATEST_F, error) CALL check("H5Pset_libver_bounds_f",error, total_error) - ! Create the test file with the datasets + ! Create the test file with the datasets CALL h5fcreate_f(DATAFILE, H5F_ACC_TRUNC_F, file, error, H5P_DEFAULT_F, fapl) CALL check("h5fcreate_f", error, total_error) @@ -190,12 +190,12 @@ SUBROUTINE test_iter_group(total_error) ENDDO - ! Create a group and named datatype under root group for testing + ! Create a group and named datatype under root group for testing CALL H5Gcreate_f(file, "grp0000000", grp, error) CALL check("H5Gcreate_f", error, total_error) - lnames(ndatasets+2) = "grp0000000" + lnames(ndatasets+2) = "grp0000000" !!$ !!$ lnames[NDATASETS] = HDstrdup("grp"); @@ -205,9 +205,9 @@ SUBROUTINE test_iter_group(total_error) CALL H5Tcommit_f(file, "dtype00000", datatype, error) CALL check("H5Tcommit_f", error, total_error) - lnames(ndatasets+1) = "dtype00000" + lnames(ndatasets+1) = "dtype00000" - ! Close everything up + ! Close everything up CALL H5Tclose_f(datatype, error) CALL check("H5Tclose_f", error, total_error) @@ -221,11 +221,11 @@ SUBROUTINE test_iter_group(total_error) CALL H5Fclose_f(file, error) CALL check("H5Fclose_f", error, total_error) - ! Iterate through the datasets in the root group in various ways + ! Iterate through the datasets in the root group in various ways CALL H5Fopen_f(DATAFILE, H5F_ACC_RDONLY_F, file, error, access_prp=fapl) CALL check("h5fopen_f", error, total_error) - ! Test all objects in group, when callback always returns 0 + ! Test all objects in group, when callback always returns 0 info%command = 0 idx = 0 CALL H5Literate_f(file, H5_INDEX_NAME_F, H5_ITER_INC_F, idx, f1, f2, ret_value, error) @@ -234,28 +234,28 @@ SUBROUTINE test_iter_group(total_error) CALL verify("H5Literate_f", error, -1, total_error) ENDIF - ! Test all objects in group, when callback always returns 1 - ! This also tests the "restarting" ability, because the index changes + ! Test all objects in group, when callback always returns 1 + ! This also tests the "restarting" ability, because the index changes info%command = 2 idx = 0 i = 0 f1 = C_FUNLOC(liter_cb) f2 = C_LOC(info) - DO + DO CALL H5Literate_f(file, H5_INDEX_NAME_F, H5_ITER_INC_F, idx, f1, f2, ret_value, error) IF(error.LT.0) EXIT - ! Verify return value from iterator gets propagated correctly + ! Verify return value from iterator gets propagated correctly CALL verify("H5Literate", ret_value, 2, total_error) - ! Increment the number of times "2" is returned + ! Increment the number of times "2" is returned i = i + 1 - ! Verify that the index is the correct value + ! Verify that the index is the correct value CALL verify("H5Literate", INT(idx), INT(i), total_error) IF(idx .GT.ndatasets+2)THEN PRINT*,"ERROR: Group iteration function walked too far!" ENDIF - ! Verify the correct name is retrieved + ! Verify the correct name is retrieved DO j = 1, 10 ichr10(j:j) = info%name(j)(1:1) ENDDO @@ -270,8 +270,8 @@ SUBROUTINE test_iter_group(total_error) PRINT*,"ERROR: Group iteration function didn't perform multiple iterations correctly" ENDIF - ! Test all objects in group, when callback changes return value - ! This also tests the "restarting" ability, because the index changes + ! Test all objects in group, when callback changes return value + ! This also tests the "restarting" ability, because the index changes info%command = 3 idx = 0 @@ -285,10 +285,10 @@ SUBROUTINE test_iter_group(total_error) IF(error.LT.0) EXIT CALL verify("H5Literate_f", ret_value, 1, total_error) - ! Increment the number of times "1" is returned + ! Increment the number of times "1" is returned i = i + 1 - ! Verify that the index is the correct value + ! Verify that the index is the correct value CALL verify("H5Literate_f", INT(idx), INT(i+10), total_error) IF(idx .GT.ndatasets+2)THEN @@ -298,7 +298,7 @@ SUBROUTINE test_iter_group(total_error) DO j = 1, 10 ichr10(j:j) = info%name(j)(1:1) ENDDO - ! Verify that the correct name is retrieved + ! Verify that the correct name is retrieved CALL verify("H5Literate_f", ichr10, lnames(INT(idx)), total_error) IF(i.EQ.42)EXIT ! prints out error message otherwise (for gcc/gfortran/g95) not intel (why) -FIX- scot ENDDO diff --git a/fortran/test/tH5MISC_1_8.F90 b/fortran/test/tH5MISC_1_8.F90 index b8c777c..bad77d0 100644 --- a/fortran/test/tH5MISC_1_8.F90 +++ b/fortran/test/tH5MISC_1_8.F90 @@ -95,18 +95,18 @@ SUBROUTINE test_genprop_basic_class(total_error) IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error - INTEGER(HID_T) :: cid1 ! Generic Property class ID - INTEGER(HID_T) :: cid2 ! Generic Property class ID + INTEGER(HID_T) :: cid1 ! Generic Property class ID + INTEGER(HID_T) :: cid2 ! Generic Property class ID CHARACTER(LEN=7) :: CLASS1_NAME = "Class 1" - CHARACTER(LEN=7) :: name ! Name of class - CHARACTER(LEN=10) :: name_big ! Name of class bigger buffer + CHARACTER(LEN=7) :: name ! Name of class + CHARACTER(LEN=10) :: name_big ! Name of class bigger buffer CHARACTER(LEN=4) :: name_small ! Name of class smaller buffer INTEGER :: error INTEGER :: size LOGICAL :: flag - ! Output message about test being performed + ! Output message about test being performed !WRITE(*,*) "Testing Basic Generic Property List Class Creation Functionality" @@ -116,11 +116,11 @@ SUBROUTINE test_genprop_basic_class(total_error) CALL H5Pget_class_name_f(cid1, name, size, error) CALL verify("H5Pget_class_name", error, -1, error) - ! Create a new generic class, derived from the root of the class hierarchy + ! Create a new generic class, derived from the root of the class hierarchy CALL H5Pcreate_class_f(H5P_ROOT_F, CLASS1_NAME, cid1, error) CALL check("H5Pcreate_class", error, total_error) - ! Check class name + ! Check class name CALL H5Pget_class_name_f(cid1, name, size, error) CALL check("H5Pget_class_name", error, total_error) CALL verify("H5Pget_class_name", size,7,error) @@ -150,27 +150,27 @@ SUBROUTINE test_genprop_basic_class(total_error) total_error = total_error + 1 ENDIF - ! Check class parent + ! Check class parent CALL H5Pget_class_parent_f(cid1, cid2, error) CALL check("H5Pget_class_parent_f", error, total_error) - ! Verify class parent correct + ! Verify class parent correct CALL H5Pequal_f(cid2, H5P_ROOT_F, flag, error) CALL check("H5Pequal_f", error, total_error) CALL verify("H5Pequal_f", flag, .TRUE., total_error) - ! Make certain false postives aren't being returned + ! Make certain false postives aren't being returned CALL H5Pequal_f(cid2, H5P_FILE_CREATE_F, flag, error) CALL check("H5Pequal_f", error, total_error) CALL verify("H5Pequal_f", flag, .FALSE., total_error) - ! Close parent class + ! Close parent class CALL H5Pclose_class_f(cid2, error) CALL check("H5Pclose_class_f", error, total_error) - ! Close class + ! Close class CALL H5Pclose_class_f(cid1, error) CALL check("H5Pclose_class_f", error, total_error) @@ -187,17 +187,17 @@ SUBROUTINE test_h5s_encode(total_error) IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error - INTEGER(hid_t) :: sid1, sid3! Dataspace ID + INTEGER(hid_t) :: sid1, sid3! Dataspace ID INTEGER(hid_t) :: decoded_sid1, decoded_sid3 INTEGER(hid_t) :: fapl ! File access property - INTEGER :: rank ! LOGICAL rank of dataspace + INTEGER :: rank ! LOGICAL rank of dataspace INTEGER(size_t) :: new_size = 0, old_size = 0, orig_size=0, scalar_size=0 ! Make sure the size is large CHARACTER(LEN=288) :: sbuf CHARACTER(LEN=288) :: scalar_buf - INTEGER(hsize_t) :: n ! Number of dataspace elements + INTEGER(hsize_t) :: n ! Number of dataspace elements INTEGER(hsize_t), DIMENSION(1:3) :: start = (/0, 0, 0/) INTEGER(hsize_t), DIMENSION(1:3) :: stride = (/2, 5, 3/) @@ -217,7 +217,7 @@ SUBROUTINE test_h5s_encode(total_error) !------------------------------------------------------------------------- ! * Test encoding and decoding of simple dataspace and hyperslab selection. ! *------------------------------------------------------------------------- - ! + ! CALL H5Screate_simple_f(SPACE1_RANK, dims1, sid1, error) CALL check("H5Screate_simple", error, total_error) @@ -227,13 +227,13 @@ SUBROUTINE test_h5s_encode(total_error) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Encode simple data space in a buffer + ! Encode simple data space in a buffer ! Find the buffer size without fapl CALL H5Sencode_f(sid1, sbuf, orig_size, error) CALL check("H5Sencode_f", error, total_error) CALL verify("H5Sencode_f", INT(orig_size), 279, total_error) - + ! Create file access property list CALL h5pcreate_f(H5P_FILE_ACCESS_F, fapl, error) CALL check("h5pcreate_f", error, total_error) @@ -252,7 +252,7 @@ SUBROUTINE test_h5s_encode(total_error) CALL check("H5Sencode_f", error, total_error) CALL verify("H5Sencode_f", INT(new_size), 101, total_error) - ! Try decoding bogus buffer + ! Try decoding bogus buffer CALL H5Sdecode_f(sbuf, decoded_sid1, error) CALL verify("H5Sdecode", error, -1, total_error) @@ -260,12 +260,12 @@ SUBROUTINE test_h5s_encode(total_error) CALL H5Sencode_f(sid1, sbuf, new_size, error, fapl) CALL check("H5Sencode_f", error, total_error) - ! Decode from the dataspace buffer and return an object handle + ! Decode from the dataspace buffer and return an object handle CALL H5Sdecode_f(sbuf, decoded_sid1, error) CALL check("H5Sdecode", error, total_error) - ! Verify the decoded dataspace + ! Verify the decoded dataspace CALL h5sget_simple_extent_npoints_f(decoded_sid1, n, error) CALL check("h5sget_simple_extent_npoints_f", error, total_error) CALL verify("h5sget_simple_extent_npoints_f", INT(n), INT(SPACE1_DIM1 * SPACE1_DIM2 * SPACE1_DIM3), & @@ -283,13 +283,13 @@ SUBROUTINE test_h5s_encode(total_error) ! ------------------------------------------------------------------------- ! * Test encoding and decoding of scalar dataspace. ! *------------------------------------------------------------------------- - ! - ! Create scalar dataspace + ! + ! Create scalar dataspace CALL H5Screate_f(H5S_SCALAR_F, sid3, error) CALL check("H5Screate_f",error, total_error) - ! Encode scalar data space in a buffer + ! Encode scalar data space in a buffer ! First find the buffer size CALL H5Sencode_f(sid3, scalar_buf, scalar_size, error) @@ -301,19 +301,19 @@ SUBROUTINE test_h5s_encode(total_error) CALL check("H5Sencode_f", error, total_error) - ! Decode from the dataspace buffer and return an object handle + ! Decode from the dataspace buffer and return an object handle CALL H5Sdecode_f(scalar_buf, decoded_sid3, error) CALL check("H5Sdecode_f", error, total_error) - ! Verify extent type + ! Verify extent type CALL H5Sget_simple_extent_type_f(decoded_sid3, space_type, error) CALL check("H5Sget_simple_extent_type_f", error, total_error) CALL verify("H5Sget_simple_extent_type_f", space_type, H5S_SCALAR_F, total_error) - ! Verify decoded dataspace + ! Verify decoded dataspace CALL h5sget_simple_extent_npoints_f(decoded_sid3, n, error) CALL check("h5sget_simple_extent_npoints_f", error, total_error) CALL verify("h5sget_simple_extent_npoints_f", INT(n), 1, total_error) @@ -359,7 +359,7 @@ SUBROUTINE test_scaleoffset(cleanup, total_error ) INTEGER(hsize_t), DIMENSION(1:2) :: chunk_dim = (/2, 5/) INTEGER, DIMENSION(1:2,1:5) :: orig_data INTEGER, DIMENSION(1:2,1:5) :: new_data - INTEGER(hsize_t), DIMENSION(1:2) :: start ! Start of hyperslab + INTEGER(hsize_t), DIMENSION(1:2) :: start ! Start of hyperslab INTEGER(hsize_t), DIMENSION(1:2) :: stride ! Stride of hyperslab INTEGER(hsize_t), DIMENSION(1:2) :: count ! BLOCK count INTEGER(hsize_t), DIMENSION(1:2) :: BLOCK ! BLOCK sizes @@ -390,11 +390,11 @@ SUBROUTINE test_scaleoffset(cleanup, total_error ) CALL H5Screate_simple_f(2, dims, space, error) CALL CHECK(" H5Screate_simple_f", error, total_error) - ! Create the dataset property list + ! Create the dataset property list CALL H5Pcreate_f(H5P_DATASET_CREATE_F, dc, error) CALL CHECK(" H5Pcreate_f", error, total_error) - ! Set fill value + ! Set fill value fillval = 10000 CALL H5Pset_fill_value_f(dc, H5T_NATIVE_INTEGER, fillval, error) CALL CHECK(" H5Pset_fill_value_f", error, total_error) @@ -402,10 +402,10 @@ SUBROUTINE test_scaleoffset(cleanup, total_error ) ! Set up to use scaleoffset filter, let library calculate minbits CALL H5Pset_chunk_f(dc, 2, chunk_dim, error) CALL CHECK(" H5Pset_chunk_f", error, total_error) - + CALL H5Pset_scaleoffset_f(dc, H5Z_SO_INT_F, H5Z_SO_INT_MINBITS_DEFAULT_F, error) CALL CHECK(" H5Pset_scaleoffset_f", error, total_error) - + ! Create the dataset CALL H5Dcreate_f(file, "scaleoffset_int", datatype, & space, dataset, error, dc) @@ -417,7 +417,7 @@ SUBROUTINE test_scaleoffset(cleanup, total_error ) ! Select hyperslab for data to write, using 1x5 blocks, ! (1,1) stride and (1,1) count starting at the position (0,0) - + start(1:2) = (/0,0/) stride(1:2) = (/1,1/) COUNT(1:2) = (/1,1/) @@ -441,21 +441,21 @@ SUBROUTINE test_scaleoffset(cleanup, total_error ) ! STEP 1: Test scaleoffset by setting up a chunked dataset and writing ! to it. !---------------------------------------------------------------------- - - ! Only data in the hyperslab will be written, other value should be fill value + + ! Only data in the hyperslab will be written, other value should be fill value CALL H5Dwrite_f(dataset, H5T_NATIVE_INTEGER, orig_data, dims, error, mspace, mspace, H5P_DEFAULT_F) CALL CHECK(" H5Dwrite_f", error, total_error) !---------------------------------------------------------------------- ! STEP 2: Try to read the data we just wrote. !---------------------------------------------------------------------- - + ! Read the dataset back - + CALL H5Dread_f(dataset, H5T_NATIVE_INTEGER, new_data, dims, error, mspace, mspace, H5P_DEFAULT_F) CALL CHECK(" H5Dread_f", error, total_error) - ! Check that the values read are the same as the values written + ! Check that the values read are the same as the values written DO j = 1, INT(dims(2)) IF(new_data(1,j) .NE. orig_data(1,j))THEN total_error = total_error + 1 diff --git a/fortran/test/tH5O.F90 b/fortran/test/tH5O.F90 index fa3787e..e8a226e 100644 --- a/fortran/test/tH5O.F90 +++ b/fortran/test/tH5O.F90 @@ -77,22 +77,22 @@ SUBROUTINE test_h5o_link(total_error) INTEGER, PARAMETER :: TRUE = 1 - LOGICAL :: committed ! Whether the named datatype is committed + LOGICAL :: committed ! Whether the named datatype is committed INTEGER :: i, j - INTEGER :: error ! Value returned from API calls + INTEGER :: error ! Value returned from API calls CHARACTER(LEN=14) :: NAME_DATATYPE_SIMPLE="H5T_NATIVE_INT" CHARACTER(LEN=16) :: NAME_DATATYPE_SIMPLE2="H5T_NATIVE_INT-2" INTEGER(HID_T) :: tid, tid2 LOGICAL :: flag - + ! Data for tested h5ocopy_f CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" INTEGER , PARAMETER :: dim0 = 4 INTEGER(HSIZE_T), DIMENSION(1:1) :: dims2 = (/dim0/) ! size read/write buffer - INTEGER , DIMENSION(1:dim0) :: wdata2 ! Write buffer + INTEGER , DIMENSION(1:dim0) :: wdata2 ! Write buffer LOGICAL :: link_exists CHARACTER(LEN=8) :: chr_exact CHARACTER(LEN=10) :: chr_lg @@ -107,45 +107,45 @@ SUBROUTINE test_h5o_link(total_error) INTEGER(HSSIZE_T) :: comment_size INTEGER(SIZE_T) :: comment_size2 - ! Initialize the raw data + ! Initialize the raw data DO i = 1, TEST6_DIM1 DO j = 1, TEST6_DIM2 wdata(i,j) = i*j ENDDO ENDDO - ! Create the dataspace + ! Create the dataspace CALL h5screate_simple_f(2, dims, space_id, error) CALL check("h5screate_simple_f",error,total_error) - ! Create LCPL with intermediate group creation flag set + ! Create LCPL with intermediate group creation flag set CALL H5Pcreate_f(H5P_LINK_CREATE_F, lcpl_id, error) CALL check("h5Pcreate_f",error,total_error) CALL H5Pset_create_inter_group_f(lcpl_id, TRUE, error) CALL check("H5Pset_create_inter_group_f",error,total_error) - ! Loop over using new group format + ! Loop over using new group format ! for(new_format = FALSE; new_format <= TRUE; new_format++) { - ! Make a FAPL that uses the "use the latest version of the format" bounds + ! Make a FAPL that uses the "use the latest version of the format" bounds CALL H5Pcreate_f(H5P_FILE_ACCESS_F,fapl_id,error) CALL check("h5Pcreate_f",error,total_error) - ! Set the "use the latest version of the format" bounds for creating objects in the file + ! Set the "use the latest version of the format" bounds for creating objects in the file CALL H5Pset_libver_bounds_f(fapl_id, H5F_LIBVER_LATEST_F, H5F_LIBVER_LATEST_F, error) CALL check("H5Pset_libver_bounds_f",error, total_error) - ! Create a new HDF5 file + ! Create a new HDF5 file CALL H5Fcreate_f(TEST_FILENAME, H5F_ACC_TRUNC_F, file_id, error, H5P_DEFAULT_F, fapl_id) CALL check("H5Fcreate_f", error, total_error) - ! Close the FAPL + ! Close the FAPL CALL h5pclose_f(fapl_id, error) CALL check("h5pclose_f",error,total_error) - ! Create and commit a datatype with no name + ! Create and commit a datatype with no name CALL H5Tcopy_f( H5T_NATIVE_INTEGER, type_id, error) CALL check("H5Tcopy_F",error,total_error) @@ -160,22 +160,22 @@ SUBROUTINE test_h5o_link(total_error) CALL H5Dcreate_anon_f(file_id, type_id, space_id, dset_id, error ) ! using no optional parameters CALL check("H5Dcreate_anon_f",error,total_error) ! - ! Verify that we can write to and read from the dataset + ! Verify that we can write to and read from the dataset ! - ! Write the data to the dataset + ! Write the data to the dataset !EP CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, wdata, dims, error, & !EP mem_space_id=H5S_ALL_F, file_space_id=H5S_ALL_F, xfer_prp = H5P_DEFAULT_F) CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, wdata, dims, error) CALL check("h5dwrite_f", error, total_error) - ! Read the data back + ! Read the data back !EP CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, rdata, dims, error, & !EP mem_space_id=H5S_ALL_F, file_space_id=H5S_ALL_F, xfer_prp = H5P_DEFAULT_F) CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, rdata, dims, error) CALL check("h5dread_f", error, total_error) - ! Verify the data + ! Verify the data DO i = 1, TEST6_DIM1 DO j = 1, TEST6_DIM2 CALL verify("H5Dread_f",wdata(i,j),rdata(i,j),total_error) @@ -188,21 +188,21 @@ SUBROUTINE test_h5o_link(total_error) CALL H5Gcreate_anon_f(file_id, group_id, error) CALL check("H5Gcreate_anon", error, total_error) - ! Link nameless datatype into nameless group + ! Link nameless datatype into nameless group CALL H5Olink_f(type_id, group_id, "datatype", error, H5P_DEFAULT_F) CALL check("H5Olink_f", error, total_error) - ! Link nameless dataset into nameless group with intermediate group + ! Link nameless dataset into nameless group with intermediate group CALL H5Olink_f(dset_id, group_id, "inter_group/dataset", error, lcpl_id, H5P_DEFAULT_F) CALL check("H5Olink_f", error, total_error) - ! Close IDs for dataset and datatype + ! Close IDs for dataset and datatype CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f", error, total_error) CALL h5tclose_f(type_id, error) CALL check("h5tclose_f", error, total_error) - ! Re-open datatype using new link + ! Re-open datatype using new link CALL H5Topen_f(group_id, "datatype", type_id, error) CALL check("h5topen_f", error, total_error) @@ -213,30 +213,30 @@ SUBROUTINE test_h5o_link(total_error) CALL h5gclose_f(group_id, error) CALL check("h5gclose_f",error,total_error) - ! Open dataset through root group and verify its data + ! Open dataset through root group and verify its data CALL H5Dopen_f(file_id, "/group/inter_group/dataset", dset_id, error) CALL check("test_lcpl.h5dopen_f", error, total_error) - ! Read data from dataset + ! Read data from dataset !EP CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, rdata, dims, error, & !EP H5S_ALL_F, H5S_ALL_F, xfer_prp = H5P_DEFAULT_F) CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, rdata, dims, error) CALL check("h5dread_f", error, total_error) - ! Verify the data + ! Verify the data DO i = 1, TEST6_DIM1 DO j = 1, TEST6_DIM2 CALL verify("H5Dread",wdata(i,j),rdata(i,j),total_error) ENDDO ENDDO - ! Close open IDs + ! Close open IDs CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f",error,total_error) CALL h5tclose_f(type_id, error) CALL check("h5tclose_f",error,total_error) - ! Close remaining IDs + ! Close remaining IDs CALL h5sclose_f(space_id, error) CALL check("h5sclose_f",error,total_error) CALL h5pclose_f(lcpl_id,error) @@ -270,7 +270,7 @@ SUBROUTINE test_h5o_link(total_error) comment_lg = ' ' - CALL h5oget_comment_by_name_f(file_id, "/G1/G2/G3", comment_lg, error) + CALL h5oget_comment_by_name_f(file_id, "/G1/G2/G3", comment_lg, error) CALL check("h5oget_comment_by_name_f", error, total_error) IF(comment_lg(1:13).NE.grp_comment)THEN @@ -287,7 +287,7 @@ SUBROUTINE test_h5o_link(total_error) comment_lg = ' ' - CALL h5oget_comment_by_name_f(file_id, "/G1/G2/G3"//' ', comment_lg, error) + CALL h5oget_comment_by_name_f(file_id, "/G1/G2/G3"//' ', comment_lg, error) CALL check("h5oget_comment_by_name_f", error, total_error) IF(comment_lg(1:13).NE.grp_comment)THEN @@ -309,7 +309,7 @@ SUBROUTINE test_h5o_link(total_error) ! Try reading into a buffer that is the correct size - CALL h5oget_comment_f(dset_id, comment, error) + CALL h5oget_comment_f(dset_id, comment, error) CALL check("h5oget_comment_f", error, total_error) IF(comment(1:15).NE.dset_comment(1:15))THEN @@ -318,18 +318,18 @@ SUBROUTINE test_h5o_link(total_error) ! Try reading into a buffer that is to small - CALL h5oget_comment_f(dset_id, comment_sm, error) + CALL h5oget_comment_f(dset_id, comment_sm, error) CALL check("h5oget_comment_f", error, total_error) IF(comment_sm(1:10).NE.dset_comment(1:10))THEN CALL check("h5oget_comment_f", -1, total_error) - ENDIF + ENDIF ! Try reading into a buffer that is larger then needed comment_lg = ' ' - CALL h5oget_comment_f(dset_id, comment_lg, error) + CALL h5oget_comment_f(dset_id, comment_lg, error) CALL check("h5oget_comment_f", error, total_error) IF(comment_lg(1:15).NE.dset_comment)THEN @@ -341,7 +341,7 @@ SUBROUTINE test_h5o_link(total_error) ! ! Check optional parameter ! - CALL h5oget_comment_f(dset_id, comment_lg, error, comment_size) + CALL h5oget_comment_f(dset_id, comment_lg, error, comment_size) CALL check("h5oget_comment_f", error, total_error) IF( comment_size.NE.15)THEN @@ -352,7 +352,7 @@ SUBROUTINE test_h5o_link(total_error) ! Try reading into a buffer that is the correct size - CALL h5oget_comment_by_name_f(dset_id, ".", comment, error) + CALL h5oget_comment_by_name_f(dset_id, ".", comment, error) CALL check("h5oget_comment_by_name_f", error, total_error) IF(comment(1:15).NE.dset_comment(1:15))THEN @@ -361,7 +361,7 @@ SUBROUTINE test_h5o_link(total_error) ! Try with trailing blanks in the name - CALL h5oget_comment_by_name_f(dset_id, ". ", comment, error) + CALL h5oget_comment_by_name_f(dset_id, ". ", comment, error) CALL check("h5oget_comment_by_name_f", error, total_error) IF(comment(1:15).NE.dset_comment(1:15))THEN @@ -371,7 +371,7 @@ SUBROUTINE test_h5o_link(total_error) ! ! Check optional parameter ! - CALL h5oget_comment_by_name_f(dset_id, ". ", comment_lg, error, comment_size2) + CALL h5oget_comment_by_name_f(dset_id, ". ", comment_lg, error, comment_size2) CALL check("h5oget_comment_by_name_f", error, total_error) IF( comment_size2.NE.15)THEN @@ -481,7 +481,7 @@ SUBROUTINE test_h5o_link(total_error) CALL h5gclose_f(group_id, error) CALL check("h5gclose_f", error, total_error) - ! Test opening an object by index, note + ! Test opening an object by index, note CALL h5oopen_by_idx_f(file_id, "/G1/G2/G3", H5_INDEX_NAME_F, H5_ITER_INC_F, 0_hsize_t, group_id, error) CALL check("h5oopen_by_idx_f", error, total_error) @@ -508,13 +508,13 @@ SUBROUTINE test_h5o_link(total_error) CALL h5pcreate_f(H5P_OBJECT_COPY_F, ocpypl_id, error) CALL check("h5Pcreate_f",error,total_error) - CALL h5pset_copy_object_f(ocpypl_id, H5O_COPY_SHALLOW_HIERARCHY_F, error) + CALL h5pset_copy_object_f(ocpypl_id, H5O_COPY_SHALLOW_HIERARCHY_F, error) CALL check("H5Pset_copy_object_f",error,total_error) - CALL h5ocopy_f(file_id, "/G1/G2", file_id, "/G1/G_cp2", error, ocpypl_id=ocpypl_id) + CALL h5ocopy_f(file_id, "/G1/G2", file_id, "/G1/G_cp2", error, ocpypl_id=ocpypl_id) CALL check("h5ocopy_f",error,total_error) - ! Makes sure the "DS1" dataset was not copied since we set a + ! Makes sure the "DS1" dataset was not copied since we set a ! flag to copy only immediate members of a group. ! Therefore, this should fail. CALL h5dopen_f(file_id, "/G1/G_cp2/DS1", dset_id, error) @@ -578,31 +578,31 @@ SUBROUTINE test_h5o_plist(total_error) IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error - INTEGER(hid_t) :: fid ! HDF5 File ID - INTEGER(hid_t) :: grp, dset, dtype, dspace ! Object identifiers - INTEGER(hid_t) :: fapl ! File access property list - INTEGER(hid_t) :: gcpl, dcpl, tcpl ! Object creation properties - INTEGER :: def_max_compact, def_min_dense ! Default phase change parameters - INTEGER :: max_compact, min_dense ! Actual phase change parameters - INTEGER :: error ! Value returned from API calls + INTEGER(hid_t) :: fid ! HDF5 File ID + INTEGER(hid_t) :: grp, dset, dtype, dspace ! Object identifiers + INTEGER(hid_t) :: fapl ! File access property list + INTEGER(hid_t) :: gcpl, dcpl, tcpl ! Object creation properties + INTEGER :: def_max_compact, def_min_dense ! Default phase change parameters + INTEGER :: max_compact, min_dense ! Actual phase change parameters + INTEGER :: error ! Value returned from API calls CHARACTER(LEN=7), PARAMETER :: TEST_FILENAME = 'test.h5' ! PRINT*,'Testing object creation properties' - ! Make a FAPL that uses the "use the latest version of the format" flag + ! Make a FAPL that uses the "use the latest version of the format" flag CALL H5Pcreate_f(H5P_FILE_ACCESS_F, fapl, error) CALL check("H5Pcreate_f", error, total_error) - ! Set the "use the latest version of the format" bounds for creating objects in the file + ! Set the "use the latest version of the format" bounds for creating objects in the file CALL H5Pset_libver_bounds_f(fapl, H5F_LIBVER_LATEST_F, H5F_LIBVER_LATEST_F, error) CALL check("H5Pcreate_f", error, total_error) - ! Create a new HDF5 file + ! Create a new HDF5 file CALL H5Fcreate_f(TEST_FILENAME, H5F_ACC_TRUNC_F, fid, error, access_prp=fapl) CALL check("H5Fcreate_f", error, total_error) - ! Create group, dataset & named datatype creation property lists + ! Create group, dataset & named datatype creation property lists CALL H5Pcreate_f(H5P_GROUP_CREATE_F, gcpl, error) CALL check("H5Pcreate_f", error, total_error) CALL H5Pcreate_f(H5P_DATASET_CREATE_F, dcpl, error) @@ -610,11 +610,11 @@ SUBROUTINE test_h5o_plist(total_error) CALL H5Pcreate_f(H5P_DATATYPE_CREATE_F, tcpl, error) CALL check("H5Pcreate_f", error, total_error) - ! Retrieve default attribute phase change values + ! Retrieve default attribute phase change values CALL H5Pget_attr_phase_change_f(gcpl, def_max_compact, def_min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - ! Set non-default attribute phase change values on each creation property list + ! Set non-default attribute phase change values on each creation property list CALL H5Pset_attr_phase_change_f(gcpl, def_max_compact+1, def_min_dense-1, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) CALL H5Pset_attr_phase_change_f(dcpl, def_max_compact+1, def_min_dense-1, error) @@ -622,7 +622,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL H5Pset_attr_phase_change_f(tcpl, def_max_compact+1, def_min_dense-1, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - ! Retrieve attribute phase change values on each creation property list and verify + ! Retrieve attribute phase change values on each creation property list and verify CALL H5Pget_attr_phase_change_f(gcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) @@ -640,16 +640,16 @@ SUBROUTINE test_h5o_plist(total_error) ! Create a group, dataset, and committed datatype within the file, ! using the respective type of creation property lists. - ! + ! - ! Create the group anonymously and link it in + ! Create the group anonymously and link it in CALL H5Gcreate_anon_f(fid, grp, error, gcpl_id=gcpl) CALL check("H5Gcreate_anon_f", error, total_error) CALL H5Olink_f(grp, fid, "group", error) CALL check("H5Olink_f", error, total_error) - ! Commit the type inside the group anonymously and link it in + ! Commit the type inside the group anonymously and link it in CALL h5tcopy_f(H5T_NATIVE_INTEGER, dtype, error) CALL check("h5tcopy_f", error, total_error) @@ -659,11 +659,11 @@ SUBROUTINE test_h5o_plist(total_error) CALL H5Olink_f(dtype, fid, "datatype", error) CALL check("H5Olink_f", error, total_error) - ! Create the dataspace for the dataset. + ! Create the dataspace for the dataset. CALL h5screate_f(H5S_SCALAR_F, dspace, error) CALL check("h5screate_f",error,total_error) - ! Create the dataset anonymously and link it in + ! Create the dataset anonymously and link it in CALL H5Dcreate_anon_f(fid, H5T_NATIVE_INTEGER, dspace, dset, error, dcpl ) CALL check("H5Dcreate_anon_f",error,total_error) @@ -673,7 +673,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL h5sclose_f(dspace, error) CALL check("h5sclose_f",error,total_error) - ! Close current creation property lists + ! Close current creation property lists CALL h5pclose_f(gcpl,error) CALL check("h5pclose_f", error, total_error) CALL h5pclose_f(dcpl,error) @@ -681,7 +681,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL h5pclose_f(tcpl,error) CALL check("h5pclose_f", error, total_error) - ! Retrieve each object's creation property list + ! Retrieve each object's creation property list CALL H5Gget_create_plist_f(grp, gcpl, error) CALL check("H5Gget_create_plist", error, total_error) @@ -691,7 +691,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL H5Dget_create_plist_f(dset, dcpl, error) CALL check("H5Dget_create_plist_f", error, total_error) - ! Retrieve attribute phase change values on each creation property list and verify + ! Retrieve attribute phase change values on each creation property list and verify CALL H5Pget_attr_phase_change_f(gcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) @@ -707,7 +707,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) - ! Close current objects + ! Close current objects CALL h5pclose_f(gcpl,error) CALL check("h5pclose_f", error, total_error) CALL h5pclose_f(dcpl,error) @@ -724,11 +724,11 @@ SUBROUTINE test_h5o_plist(total_error) CALL check("h5dclose_f",error,total_error) CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Re-open the file and check that the object creation properties persist + ! Re-open the file and check that the object creation properties persist CALL h5fopen_f(TEST_FILENAME, H5F_ACC_RDONLY_F, fid, error, access_prp=fapl) CALL check("H5fopen_f",error,total_error) - ! Re-open objects + ! Re-open objects CALL H5Gopen_f(fid, "group", grp, error) CALL check("h5gopen_f", error, total_error) @@ -738,7 +738,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL H5Dopen_f(fid, "dataset", dset, error) CALL check("h5dopen_f", error, total_error) - ! Retrieve each object's creation property list + ! Retrieve each object's creation property list CALL H5Gget_create_plist_f(grp, gcpl, error) CALL check("H5Gget_create_plist", error, total_error) @@ -748,7 +748,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL H5Dget_create_plist_f(dset, dcpl, error) CALL check("H5Dget_create_plist_f", error, total_error) - ! Retrieve attribute phase change values on each creation property list and verify + ! Retrieve attribute phase change values on each creation property list and verify CALL H5Pget_attr_phase_change_f(gcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) @@ -764,7 +764,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) - ! Close current objects + ! Close current objects CALL h5pclose_f(gcpl,error) CALL check("h5pclose_f", error, total_error) CALL h5pclose_f(dcpl,error) @@ -782,7 +782,7 @@ SUBROUTINE test_h5o_plist(total_error) CALL h5fclose_f(fid, error) CALL check("h5fclose_f",error,total_error) - ! Close the FAPL + ! Close the FAPL CALL H5Pclose_f(fapl, error) CALL check("H5Pclose_f", error, total_error) diff --git a/fortran/test/tH5O_F03.F90 b/fortran/test/tH5O_F03.F90 index c9ecccc..cb6273e 100644 --- a/fortran/test/tH5O_F03.F90 +++ b/fortran/test/tH5O_F03.F90 @@ -5,7 +5,7 @@ ! ! FUNCTION ! Test FORTRAN HDF5 H5O APIs which are dependent on FORTRAN 2003 -! features. +! features. ! ! COPYRIGHT ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -28,9 +28,9 @@ ! ***************************************** MODULE visit_cb - USE HDF5 + USE HDF5 USE, INTRINSIC :: ISO_C_BINDING - + IMPLICIT NONE INTEGER, PARAMETER :: info_size = 9 @@ -283,7 +283,7 @@ CONTAINS SUBROUTINE test_h5o_refcount(total_error) - USE HDF5 + USE HDF5 USE TH5_MISC USE ISO_C_BINDING IMPLICIT NONE @@ -301,7 +301,7 @@ SUBROUTINE test_h5o_refcount(total_error) ! Create a new HDF5 file CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid,error) - CALL check("h5fcreate_f", error, total_error) + CALL check("h5fcreate_f", error, total_error) ! Create a group, dataset, and committed datatype within the file ! Create the group @@ -567,13 +567,13 @@ SUBROUTINE test_obj_info(total_error) INTEGER, INTENT(INOUT) :: total_error - INTEGER(hid_t) :: fid = -1 ! File ID - INTEGER(hid_t) :: gid = -1, gid2 = -1 ! Group IDs - INTEGER(hid_t) :: did ! Dataset ID - INTEGER(hid_t) :: sid ! Dataspace ID - TYPE(hobj_ref_t_f), TARGET :: wref ! Reference to write + INTEGER(hid_t) :: fid = -1 ! File ID + INTEGER(hid_t) :: gid = -1, gid2 = -1 ! Group IDs + INTEGER(hid_t) :: did ! Dataset ID + INTEGER(hid_t) :: sid ! Dataspace ID + TYPE(hobj_ref_t_f), TARGET :: wref ! Reference to write TYPE(hobj_ref_t_f), TARGET :: rref ! Reference to read - TYPE(H5O_info_t) :: oinfo ! Object info struct + TYPE(H5O_info_t) :: oinfo ! Object info struct INTEGER :: error TYPE(C_PTR) :: f_ptr @@ -595,7 +595,7 @@ SUBROUTINE test_obj_info(total_error) CALL h5gcreate_f(fid, GROUPNAME, gid, error) CALL check("h5gcreate_f",error,total_error) - ! Create nested groups + ! Create nested groups CALL h5gcreate_f(gid, GROUPNAME2, gid2, error) CALL check("h5gcreate_f",error,total_error) CALL h5gclose_f(gid2, error) @@ -630,7 +630,7 @@ SUBROUTINE test_obj_info(total_error) CALL h5dwrite_f(did, H5T_STD_REF_OBJ, f_ptr, error) CALL check("h5dwrite_f",error, total_error) - ! Close objects + ! Close objects CALL h5dclose_f(did, error) CALL check("h5dclose_f", error, total_error) CALL h5sclose_f(sid, error) @@ -718,7 +718,7 @@ SUBROUTINE build_visit_file(fid) USE TH5_MISC IMPLICIT NONE - INTEGER(hid_t) :: fid ! File ID + INTEGER(hid_t) :: fid ! File ID INTEGER(hid_t) :: gid = -1, gid2 = -1 ! Group IDs INTEGER(hid_t) :: sid = -1 ! Dataspace ID INTEGER(hid_t) :: did = -1 ! Dataset ID @@ -726,7 +726,7 @@ SUBROUTINE build_visit_file(fid) INTEGER(hid_t) :: aid = -1, aid2 = -1, aid3 = -1 ! Attribute ID CHARACTER(LEN=20) :: filename = 'visit.h5' INTEGER :: error - + ! Create file for visiting CALL H5Fcreate_f(filename, H5F_ACC_TRUNC_F, fid, error) diff --git a/fortran/test/tH5P.F90 b/fortran/test/tH5P.F90 index c42dd7e..7fe3971 100644 --- a/fortran/test/tH5P.F90 +++ b/fortran/test/tH5P.F90 @@ -25,7 +25,7 @@ ! !***** MODULE TH5P - USE HDF5 ! This module contains all necessary modules + USE HDF5 ! This module contains all necessary modules USE TH5_MISC USE TH5_MISC_GEN @@ -37,11 +37,11 @@ SUBROUTINE external_test(cleanup, total_error) ! h5pset_external_f, h5pget_external_count_f, ! h5pget_external_f - + IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error - + CHARACTER(LEN=8), PARAMETER :: filename = "external" CHARACTER(LEN=80) :: fix_filename INTEGER(HID_T) :: file_id @@ -75,7 +75,7 @@ SUBROUTINE external_test(cleanup, total_error) ENDIF CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error) CALL check("h5fcreate_f",error,total_error) - + CALL h5pcreate_f(H5P_DATASET_XFER_F, plist_id, error) CALL check("h5pcreate_f", error, total_error) CALL h5pset_buffer_f(plist_id, buf_size, error) @@ -88,7 +88,7 @@ SUBROUTINE external_test(cleanup, total_error) ENDIF CALL h5pclose_f(plist_id, error) CALL check("h5pclose_f", error, total_error) - + CALL h5pcreate_f(H5P_DATASET_CREATE_F, plist_id, error) CALL check("h5pcreate_f",error,total_error) cur_size(1) =100 @@ -103,7 +103,7 @@ SUBROUTINE external_test(cleanup, total_error) CALL h5dcreate_f(file_id, "dset1", H5T_NATIVE_INTEGER, space_id, & dataset_id, error, plist_id) CALL check("h5dcreate_f", error, total_error) - + CALL h5dclose_f(dataset_id, error) CALL check("h5dclose_f", error, total_error) CALL h5pclose_f(plist_id, error) @@ -111,11 +111,11 @@ SUBROUTINE external_test(cleanup, total_error) CALL h5sclose_f(space_id, error) CALL check("h5sclose_f", error, total_error) CALL h5fclose_f(file_id, error) - + CALL h5fopen_f(fix_filename, H5F_ACC_RDWR_F, file_id, error) CALL h5dopen_f(file_id, "dset1", dataset_id, error) CALL check("h5dopen_f",error,total_error) - + ! Read dataset creation information CALL h5dget_create_plist_f(dataset_id, plist_id, error) CALL check("h5dget_create_plist_f",error,total_error) @@ -138,7 +138,7 @@ SUBROUTINE external_test(cleanup, total_error) WRITE (*,*) "got external file size is not correct" total_error = total_error + 1 END IF - + CALL h5dclose_f(dataset_id, error) CALL check("h5dclose_f", error, total_error) CALL h5pclose_f(plist_id, error) @@ -152,15 +152,15 @@ SUBROUTINE external_test(cleanup, total_error) END SUBROUTINE external_test SUBROUTINE multi_file_test(cleanup, total_error) - + IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error - + CHARACTER(LEN=9), PARAMETER :: filename = "multidset" ! File name CHARACTER(LEN=80) :: fix_filename CHARACTER(LEN=4), PARAMETER :: dsetname = "dset" ! Dataset name - + INTEGER(HID_T) :: file_id ! File identifier INTEGER(HID_T) :: dset_id ! Dataset identifier INTEGER(HID_T) :: dspace_id ! Dataspace identifier @@ -173,10 +173,10 @@ SUBROUTINE multi_file_test(cleanup, total_error) !INTEGER(HADDR_T), DIMENSION(0:H5FD_MEM_NTYPES_F) :: memb_addr LOGICAL :: relax = .TRUE. LOGICAL :: relax_out = .TRUE. - + INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions INTEGER :: rank = 2 ! Dataset rank - + INTEGER, DIMENSION(4,6) :: dset_data, data_out ! Data buffers INTEGER :: error ! Error flag INTEGER(HID_T) :: driver @@ -201,7 +201,7 @@ SUBROUTINE multi_file_test(cleanup, total_error) memb_addr(H5FD_MEM_LHEAP_F) = 0.3 memb_map(H5FD_MEM_OHDR_F) = H5FD_MEM_OHDR_F memb_addr(H5FD_MEM_OHDR_F) = 0.4 - + memb_name = ' ' memb_name(H5FD_MEM_SUPER_F) = '%s-s.h5' memb_name(H5FD_MEM_BTREE_F) = '%s-b.h5' @@ -218,7 +218,7 @@ SUBROUTINE multi_file_test(cleanup, total_error) dset_data(i,j) = (i-1)*6 + j END DO END DO - + ! ! Create a new file using default properties. ! @@ -244,8 +244,8 @@ SUBROUTINE multi_file_test(cleanup, total_error) ! CALL h5pget_cache_f(fapl, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, & rdcc_w0, error) - CALL check("h5pget_cache_f", error, total_error) - + CALL check("h5pget_cache_f", error, total_error) + ! ! Set cache to some number ! @@ -284,13 +284,13 @@ SUBROUTINE multi_file_test(cleanup, total_error) ! CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f", error, total_error) - + ! ! Terminate access to the data space. ! CALL h5sclose_f(dspace_id, error) CALL check("h5sclose_f", error, total_error) - + ! ! Close the file. ! @@ -318,31 +318,31 @@ SUBROUTINE multi_file_test(cleanup, total_error) ! write(*,*) memb_name_out ! write(*,*) memb_addr_out ! CALL check("h5pget_fapl_multi_f", error, total_error) - + ! ! Open the existing dataset. ! CALL h5dopen_f(file_id, dsetname, dset_id, error) CALL check("h5dopen_f", error, total_error) - + ! ! Get the dataset type. ! CALL h5dget_type_f(dset_id, dtype_id, error) CALL check("h5dget_type_f", error, total_error) - + ! ! Get the data space. ! CALL h5dget_space_f(dset_id, dspace_id, error) CALL check("h5dget_space_f", error, total_error) - + ! ! Read the dataset. ! CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error) CALL check("h5dread_f", error, total_error) - + ! !Compare the data. ! @@ -354,19 +354,19 @@ SUBROUTINE multi_file_test(cleanup, total_error) END IF END DO END DO - + ! ! End access to the dataset and release resources used by it. ! CALL h5dclose_f(dset_id, error) CALL check("h5dclose_f", error, total_error) - + ! ! Terminate access to the data space. ! CALL h5sclose_f(dspace_id, error) CALL check("h5sclose_f", error, total_error) - + ! ! Terminate access to the data type. ! @@ -383,7 +383,7 @@ SUBROUTINE multi_file_test(cleanup, total_error) CALL check("h5pclose_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) - + IF(cleanup) CALL h5_cleanup_f(filename//'.h5-b', H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename//'.h5-g', H5P_DEFAULT_F, error) @@ -396,7 +396,7 @@ SUBROUTINE multi_file_test(cleanup, total_error) CALL check("h5_cleanup_f", error, total_error) IF(cleanup) CALL h5_cleanup_f(filename//'.h5-s', H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) - + RETURN END SUBROUTINE multi_file_test @@ -419,27 +419,27 @@ END SUBROUTINE multi_file_test !------------------------------------------------------------------------- ! SUBROUTINE test_chunk_cache(cleanup, total_error) - + IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error - + CHARACTER(LEN=14), PARAMETER :: filename="chunk_cache" CHARACTER(LEN=80) :: fix_filename - INTEGER(hid_t) :: fid = -1 ! File ID - INTEGER(hid_t) :: fapl_local = -1 ! Local fapl - INTEGER(hid_t) :: fapl_def = -1 ! Default fapl - INTEGER(hid_t) :: dcpl = -1 ! Dataset creation property list ID - INTEGER(hid_t) :: dapl1 = -1 ! Dataset access property list ID - INTEGER(hid_t) :: dapl2 = -1 ! Dataset access property list ID - INTEGER(hid_t) :: sid = -1 ! Dataspace ID - INTEGER(hid_t) :: dsid = -1 ! Dataset ID - INTEGER(hsize_t), DIMENSION(1:1) :: chunk_dim, NDIM = (/100/) ! Dataset and chunk dimensions - INTEGER(size_t) :: nslots_1, nslots_2, nslots_3, nslots_4 ! rdcc number of elements - INTEGER(size_t) :: nbytes_1, nbytes_2, nbytes_3, nbytes_4 ! rdcc number of bytes + INTEGER(hid_t) :: fid = -1 ! File ID + INTEGER(hid_t) :: fapl_local = -1 ! Local fapl + INTEGER(hid_t) :: fapl_def = -1 ! Default fapl + INTEGER(hid_t) :: dcpl = -1 ! Dataset creation property list ID + INTEGER(hid_t) :: dapl1 = -1 ! Dataset access property list ID + INTEGER(hid_t) :: dapl2 = -1 ! Dataset access property list ID + INTEGER(hid_t) :: sid = -1 ! Dataspace ID + INTEGER(hid_t) :: dsid = -1 ! Dataset ID + INTEGER(hsize_t), DIMENSION(1:1) :: chunk_dim, NDIM = (/100/) ! Dataset and chunk dimensions + INTEGER(size_t) :: nslots_1, nslots_2, nslots_3, nslots_4 ! rdcc number of elements + INTEGER(size_t) :: nbytes_1, nbytes_2, nbytes_3, nbytes_4 ! rdcc number of bytes INTEGER :: mdc_nelmts - INTEGER(size_t) ::nlinks ! Number of link traversals - REAL :: w0_1, w0_2, w0_3, w0_4 ! rdcc preemption policy + INTEGER(size_t) ::nlinks ! Number of link traversals + REAL :: w0_1, w0_2, w0_3, w0_4 ! rdcc preemption policy INTEGER :: error INTEGER(size_t) rdcc_nelmts INTEGER(size_t) rdcc_nbytes @@ -452,7 +452,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) STOP ENDIF - ! Create a default fapl and dapl + ! Create a default fapl and dapl CALL H5Pcreate_f(H5P_FILE_ACCESS_F, fapl_def, error) CALL check("H5Pcreate_f", error, total_error) CALL H5Pcreate_f(H5P_DATASET_ACCESS_F, dapl1, error) @@ -460,7 +460,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) ! Verify that H5Pget_chunk_cache(dapl) returns the same values as are in ! the default fapl. - ! + ! CALL H5Pget_cache_f(fapl_def, mdc_nelmts, nslots_1, nbytes_1, w0_1, error) CALL check("H5Pget_cache_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl1, nslots_4, nbytes_4, w0_4, error) @@ -469,7 +469,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL verify("H5Pget_chunk_cache_f", nbytes_1, nbytes_4, total_error) CALL verify("H5Pget_chunk_cache_f", w0_1, w0_4, total_error) - ! Set a lapl property on dapl1 (to verify inheritance) + ! Set a lapl property on dapl1 (to verify inheritance) CALL H5Pset_nlinks_f(dapl1, 134_size_t , error) CALL check("H5Pset_nlinks_f", error, total_error) CALL H5Pget_nlinks_f(dapl1, nlinks, error) @@ -494,29 +494,29 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL H5Pset_cache_f(fapl_local, 0, nslots_2, nbytes_2, w0_2, error) CALL check("H5Pset_cache_f", error, total_error) - ! Create file + ! Create file CALL H5Fcreate_f(fix_filename, H5F_ACC_TRUNC_F, fid, error, H5P_DEFAULT_F, fapl_local) CALL check("H5Fcreate_f", error, total_error) - ! Create dataset creation property list + ! Create dataset creation property list CALL H5Pcreate_f(H5P_DATASET_CREATE_F, dcpl, error) CALL check("H5Pcreate_f", error, total_error) - ! Set chunking + ! Set chunking chunk_dim(1) = 10 CALL H5Pset_chunk_f(dcpl, 1, chunk_dim, error) CALL check("H5Pset_chunk_f", error, total_error) - ! Create 1-D dataspace + ! Create 1-D dataspace ndim(1) = 100 CALL H5Screate_simple_f(1, ndim, sid, error) CALL check("H5Pcreate_f", error, total_error) - ! Create dataset with default dapl + ! Create dataset with default dapl CALL H5Dcreate_f(fid, "dset", H5T_NATIVE_INTEGER, sid, dsid, error, dcpl, H5P_DEFAULT_F, dapl1) CALL check("H5Pcreate_f", error, total_error) - - ! Retrieve dapl from dataset, verify cache values are the same as on fapl_local + + ! Retrieve dapl from dataset, verify cache values are the same as on fapl_local CALL H5Dget_access_plist_f(dsid, dapl2, error) CALL check("H5Dget_access_plist_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) @@ -524,9 +524,9 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL verify("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) CALL verify("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) CALL verify("H5Pget_chunk_cache_f", w0_2, w0_4, total_error) - CALL H5Pclose_f(dapl2,error) + CALL H5Pclose_f(dapl2,error) CALL check("H5Pclose_f", error, total_error) - + ! Set new values on dapl1. nbytes will be set to default, so the file ! property will override this setting @@ -537,7 +537,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL H5Pset_chunk_cache_f(dapl1, nslots_3, nbytes_3, w0_3, error) CALL check("H5Pset_chunk_cache_f", error, total_error) - ! Close dataset, reopen with dapl1. Note the use of a dapl with H5Oopen + ! Close dataset, reopen with dapl1. Note the use of a dapl with H5Oopen CALL H5Dclose_f(dsid, error) CALL H5Oopen_f(fid, "dset", dsid, error, dapl1) @@ -572,11 +572,11 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL verify("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) CALL verify("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) CALL verify("H5Pget_chunk_cache_f", w0_2, w0_4, total_error) - CALL H5Pclose_f(dapl2,error) + CALL H5Pclose_f(dapl2,error) CALL check("H5Pclose_f", error, total_error) ! Similary, test use of H5Dcreate2 with H5P_DEFAULT - CALL H5Dclose_f(dsid, error) + CALL H5Dclose_f(dsid, error) CALL check("H5Dclose_f", error, total_error) CALL H5Dcreate_f(fid, "dset2", H5T_NATIVE_INTEGER, sid, dsid, error, dcpl, H5P_DEFAULT_F, H5P_DEFAULT_F) @@ -599,7 +599,7 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL check("H5Pset_cache_f", error, total_error) ! Close and reopen file with new fapl_local - + CALL H5Dclose_f(dsid, error) CALL check("H5Dclose_f", error, total_error) CALL H5Fclose_f(fid,error) @@ -611,13 +611,13 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) ! Verify that dapl2 retrieved earlier (using values from the old fapl) ! sets its values in the new file (test use of H5Dopen2 with a dapl) ! - + CALL h5dopen_f (fid, "dset", dsid, error, dapl2) CALL check("h5dopen_f", error, total_error) - + CALL H5Pclose_f(dapl2,error) CALL check("H5Pclose_f", error, total_error) ! Close dapl2, to avoid id leak - + CALL H5Dget_access_plist_f(dsid, dapl2, error) CALL check("H5Dget_access_plist_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) @@ -707,15 +707,15 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL H5Sclose_f(sid,error) CALL check("H5Sclose_f", error, total_error) CALL H5Pclose_f(fapl_local,error) - CALL check("H5Pclose_f", error, total_error) + CALL check("H5Pclose_f", error, total_error) CALL H5Pclose_f(fapl_def,error) - CALL check("H5Pclose_f", error, total_error) + CALL check("H5Pclose_f", error, total_error) CALL H5Pclose_f(dapl1,error) - CALL check("H5Pclose_f", error, total_error) + CALL check("H5Pclose_f", error, total_error) CALL H5Pclose_f(dapl2,error) - CALL check("H5Pclose_f", error, total_error) + CALL check("H5Pclose_f", error, total_error) CALL H5Pclose_f(dcpl,error) - CALL check("H5Pclose_f", error, total_error) + CALL check("H5Pclose_f", error, total_error) CALL H5Fclose_f(fid,error) CALL check("H5Fclose_f", error, total_error) diff --git a/fortran/test/tH5P_F03.F90 b/fortran/test/tH5P_F03.F90 index 083c312..3e7c552 100644 --- a/fortran/test/tH5P_F03.F90 +++ b/fortran/test/tH5P_F03.F90 @@ -5,7 +5,7 @@ ! ! FUNCTION ! Test FORTRAN HDF5 H5P APIs which are dependent on FORTRAN 2003 -! features. +! features. ! ! COPYRIGHT ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -40,35 +40,35 @@ MODULE test_genprop_cls_cb1_mod USE HDF5 USE ISO_C_BINDING IMPLICIT NONE - - TYPE, BIND(C) :: cop_cb_struct_ ! Struct for iterations + + TYPE, BIND(C) :: cop_cb_struct_ ! Struct for iterations INTEGER :: count INTEGER(HID_T) :: id END TYPE cop_cb_struct_ CONTAINS - + INTEGER FUNCTION test_genprop_cls_cb1_f(list_id, create_data ) bind(C) - + IMPLICIT NONE INTEGER(HID_T), INTENT(IN), VALUE :: list_id - + TYPE(cop_cb_struct_) :: create_data create_data%count = create_data%count + 1 create_data%id = list_id test_genprop_cls_cb1_f = 0 - + END FUNCTION test_genprop_cls_cb1_f END MODULE test_genprop_cls_cb1_mod MODULE TH5P_F03 - USE HDF5 - USE TH5_MISC + USE HDF5 + USE TH5_MISC USE TH5_MISC_GEN USE ISO_C_BINDING @@ -89,7 +89,7 @@ CONTAINS ! * Modifications: ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE test_create(total_error) @@ -116,9 +116,9 @@ SUBROUTINE test_create(total_error) ! ! * Create a file. - ! + ! CALL h5fcreate_f(filename,H5F_ACC_TRUNC_F,file,error) - CALL check("h5fcreate_f", error, total_error) + CALL check("h5fcreate_f", error, total_error) CALL h5screate_simple_f(5, cur_size, space, error, cur_size) CALL check("h5screate_simple_f", error, total_error) @@ -129,7 +129,7 @@ SUBROUTINE test_create(total_error) CALL h5pset_chunk_f(dcpl, 5, ch_size, error) CALL check("h5pset_chunk_f",error, total_error) - ! Create a compound datatype + ! Create a compound datatype CALL h5tcreate_f(H5T_COMPOUND_F, H5_SIZEOF(fill_ctype), comp_type_id, error) CALL check("h5tcreate_f", error, total_error) h5off = H5OFFSETOF(C_LOC(fill_ctype), C_LOC(fill_ctype%a)) @@ -150,7 +150,7 @@ SUBROUTINE test_create(total_error) CALL H5Pset_fill_time_f(dcpl, H5D_FILL_TIME_ALLOC_F, error) CALL check("H5Pset_fill_time_f",error, total_error) - ! Compound datatype test + ! Compound datatype test f_ptr = C_LOC(fill_ctype) @@ -205,7 +205,7 @@ SUBROUTINE test_create(total_error) CALL h5fclose_f(file,error) CALL check("h5fclose_f", error, total_error) - ! Open the file and get the dataset fill value from each dataset + ! Open the file and get the dataset fill value from each dataset CALL h5pcreate_f(H5P_FILE_ACCESS_F, fapl, error) CALL check("h5pcreate_f",error, total_error) @@ -252,7 +252,7 @@ SUBROUTINE test_create(total_error) CALL h5fopen_f (FILENAME, H5F_ACC_RDONLY_F, file, error, fapl) CALL check("h5fopen_f", error, total_error) - ! Compound datatype test + ! Compound datatype test CALL h5dopen_f(file, "dset9", dset9, error) CALL check("h5dopen_f", error, total_error) @@ -306,9 +306,9 @@ SUBROUTINE test_genprop_class_callback(total_error) INTEGER, INTENT(INOUT) :: total_error - INTEGER(hid_t) :: cid1, cid2 ! Generic Property class ID - INTEGER(hid_t) :: lid1, lid2 ! Generic Property list ID - INTEGER(size_t) :: nprops ! Number of properties in class + INTEGER(hid_t) :: cid1, cid2 ! Generic Property class ID + INTEGER(hid_t) :: lid1, lid2 ! Generic Property list ID + INTEGER(size_t) :: nprops ! Number of properties in class TYPE(cop_cb_struct_), TARGET :: crt_cb_struct, cls_cb_struct INTEGER :: CLASS1_NAME_SIZE = 7 ! length of class string @@ -329,7 +329,7 @@ SUBROUTINE test_genprop_class_callback(total_error) INTEGER :: PROP3_DEF_VALUE = 10 INTEGER :: PROP4_DEF_VALUE = 10 - INTEGER :: error ! Generic RETURN value + INTEGER :: error ! Generic RETURN value LOGICAL :: flag ! for tests f1 = C_FUNLOC(test_genprop_cls_cb1_f) @@ -338,45 +338,45 @@ SUBROUTINE test_genprop_class_callback(total_error) f2 = C_LOC(crt_cb_struct) f6 = C_LOC(cls_cb_struct) - ! Create a new generic class, derived from the root of the class hierarchy + ! Create a new generic class, derived from the root of the class hierarchy CALL h5pcreate_class_f(h5p_ROOT_F, CLASS1_NAME, cid1, error, f1, f2, c_null_funptr, c_null_ptr, f5, f6) CALL check("h5pcreate_class_f", error, total_error) - ! Insert first property into class (with no callbacks) + ! Insert first property into class (with no callbacks) CALL h5pregister_f(cid1, PROP1_NAME, PROP1_SIZE, PROP1_DEF_VALUE, error) CALL check("h5pregister_f", error, total_error) - ! Insert second property into class (with no callbacks) + ! Insert second property into class (with no callbacks) CALL h5pregister_f(cid1, PROP2_NAME, PROP2_SIZE, PROP2_DEF_VALUE, error) CALL check("h5pregister_f", error, total_error) - ! Insert third property into class (with no callbacks) + ! Insert third property into class (with no callbacks) CALL h5pregister_f(cid1, PROP3_NAME, PROP3_SIZE, PROP3_DEF_VALUE, error) CALL check("h5pregister_f", error, total_error) - ! Insert fourth property into class (with no callbacks) + ! Insert fourth property into class (with no callbacks) CALL h5pregister_f(cid1, PROP4_NAME, PROP4_SIZE, PROP4_DEF_VALUE, error) CALL check("h5pregister_f", error, total_error) - ! Check the number of properties in class + ! Check the number of properties in class CALL h5pget_nprops_f(cid1, nprops, error) CALL check("h5pget_nprops_f", error, total_error) CALL verify("h5pget_nprops_f", INT(nprops), 4, total_error) - ! Initialize class callback structs + ! Initialize class callback structs crt_cb_struct%count = 0 crt_cb_struct%id = -1 cls_cb_struct%count = 0 cls_cb_struct%id = -1 - ! Create a property list from the class + ! Create a property list from the class CALL h5pcreate_f(cid1, lid1, error) CALL check("h5pcreate_f", error, total_error) - ! Get the list's class + ! Get the list's class CALL H5Pget_class_f(lid1, cid2, error) CALL check("H5Pget_class_f", error, total_error) - ! Check that the list's class is correct + ! Check that the list's class is correct CALL H5Pequal_f(cid2, cid1, flag, error) CALL check("H5Pequal_f", error, total_error) CALL verify("H5Pequal_f", flag, .TRUE., total_error) @@ -389,41 +389,41 @@ SUBROUTINE test_genprop_class_callback(total_error) WRITE(*,*) 'Class names do not match! name=',CLASS1_NAME_BUF, 'CLASS1_NAME=',CLASS1_NAME total_error = total_error + 1 ENDIF - ! Close class + ! Close class CALL h5pclose_class_f(cid2, error) CALL check("h5pclose_class_f", error, total_error) - ! Verify that the creation callback occurred + ! Verify that the creation callback occurred CALL verify("h5pcreate_f", crt_cb_struct%count, 1, total_error) CALL verify("h5pcreate_f", crt_cb_struct%id, lid1, total_error) - ! Check the number of properties in list + ! Check the number of properties in list CALL h5pget_nprops_f(lid1,nprops, error) CALL check("h5pget_nprops_f", error, total_error) CALL verify("h5pget_nprops_f", INT(nprops), 4, total_error) - ! Create another property list from the class + ! Create another property list from the class CALL h5pcreate_f(cid1, lid2, error) CALL check("h5pcreate_f", error, total_error) - ! Verify that the creation callback occurred + ! Verify that the creation callback occurred CALL verify("h5pcreate_f", crt_cb_struct%count, 2, total_error) CALL verify("h5pcreate_f", crt_cb_struct%id, lid2, total_error) - ! Check the number of properties in list + ! Check the number of properties in list CALL h5pget_nprops_f(lid2,nprops, error) CALL check("h5pget_nprops_f", error, total_error) CALL verify("h5pget_nprops_f", INT(nprops), 4, total_error) - ! Close first list + ! Close first list CALL h5pclose_f(lid1, error); CALL check("h5pclose_f", error, total_error) - ! Verify that the close callback occurred + ! Verify that the close callback occurred CALL verify("h5pcreate_f", cls_cb_struct%count, 1, total_error) CALL verify("h5pcreate_f", cls_cb_struct%id, lid1, total_error) - ! Close second list + ! Close second list CALL h5pclose_f(lid2, error); CALL check("h5pclose_f", error, total_error) @@ -431,7 +431,7 @@ SUBROUTINE test_genprop_class_callback(total_error) CALL verify("h5pcreate_f", cls_cb_struct%count, 2, total_error) CALL verify("h5pcreate_f", cls_cb_struct%id, lid2, total_error) - ! Close class + ! Close class CALL h5pclose_class_f(cid1, error) CALL check("h5pclose_class_f", error, total_error) @@ -459,7 +459,7 @@ SUBROUTINE test_h5p_file_image(total_error) INTEGER, PARAMETER :: count = 10 INTEGER, DIMENSION(1:count), TARGET :: buffer INTEGER, DIMENSION(1:count), TARGET :: temp - INTEGER :: i + INTEGER :: i INTEGER(size_t) :: size INTEGER(size_t) :: temp_size INTEGER :: error ! error return value @@ -489,7 +489,7 @@ SUBROUTINE test_h5p_file_image(total_error) CALL h5pset_file_image_f(fapl_1, f_ptr, size, error) CALL check("h5pset_file_image_f", error, total_error) - + ! Get the same data back DO i = 1, count f_ptr1(i) = C_LOC(temp(i)) @@ -501,7 +501,7 @@ SUBROUTINE test_h5p_file_image(total_error) ! Check that sizes are the same, and that the buffers are identical but separate CALL verify("h5pget_file_image_f", INT(temp_size), INT(size), total_error) - + ! Verify the image data is correct DO i = 1, count CALL verify("h5pget_file_image_f", temp(i), buffer(i), total_error) @@ -529,18 +529,18 @@ SUBROUTINE external_test_offset(cleanup,total_error) LOGICAL, INTENT(IN) :: cleanup INTEGER(hid_t) :: fapl=-1 ! file access property list - INTEGER(hid_t) :: file=-1 ! file to write to - INTEGER(hid_t) :: dcpl=-1 ! dataset creation properties - INTEGER(hid_t) :: space=-1 ! data space - INTEGER(hid_t) :: dset=-1 ! dataset + INTEGER(hid_t) :: file=-1 ! file to write to + INTEGER(hid_t) :: dcpl=-1 ! dataset creation properties + INTEGER(hid_t) :: space=-1 ! data space + INTEGER(hid_t) :: dset=-1 ! dataset INTEGER(hid_t) :: grp=-1 ! group to emit diagnostics - INTEGER(size_t) :: i, j ! miscellaneous counters + INTEGER(size_t) :: i, j ! miscellaneous counters CHARACTER(LEN=180) :: filename ! file names INTEGER, DIMENSION(1:25) :: part - INTEGER, DIMENSION(1:100), TARGET :: whole ! raw data buffers - INTEGER(hsize_t), DIMENSION(1:1) :: cur_size ! current data space size - INTEGER(hid_t) :: hs_space ! hyperslab data space - INTEGER(hsize_t), DIMENSION(1:1) :: hs_start = (/30/) ! hyperslab starting offset + INTEGER, DIMENSION(1:100), TARGET :: whole ! raw data buffers + INTEGER(hsize_t), DIMENSION(1:1) :: cur_size ! current data space size + INTEGER(hid_t) :: hs_space ! hyperslab data space + INTEGER(hsize_t), DIMENSION(1:1) :: hs_start = (/30/) ! hyperslab starting offset INTEGER(hsize_t), DIMENSION(1:1) :: hs_count = (/25/) ! hyperslab size CHARACTER(LEN=1) :: ichr1 ! character conversion holder INTEGER :: error ! error status @@ -559,23 +559,23 @@ SUBROUTINE external_test_offset(cleanup,total_error) WRITE(ichr1,'(I1.1)') i filename = "extern_"//ichr1//"a.raw" OPEN(10, FILE=filename, ACCESS='STREAM', form='UNFORMATTED') - + WRITE(10) temparray(1:(i-1)*10) WRITE(10) part CLOSE(10) ENDDO ! - ! Create the file and an initial group. + ! Create the file and an initial group. CALL h5pcreate_f(H5P_FILE_ACCESS_F, fapl, error) CALL h5fcreate_f('extren_raw.h5', H5F_ACC_TRUNC_F, file, error, access_prp=fapl) CALL check("h5fcreate_f",error,total_error) - + CALL h5gcreate_f(file, "emit-diagnostics", grp, error) CALL check("h5gcreate_f",error, total_error) - + ! Create the dataset - sizeof_part = INT(H5_SIZEOF(part(1))*25, hsize_t) + sizeof_part = INT(H5_SIZEOF(part(1))*25, hsize_t) CALL h5pcreate_f(H5P_DATASET_CREATE_F, dcpl, error) CALL check("h5pcreate_f", error, total_error) @@ -587,7 +587,7 @@ SUBROUTINE external_test_offset(cleanup,total_error) CALL check("h5pset_external_f",error,total_error) CALL h5pset_external_f(dcpl, "extern_4a.raw", INT(30,off_t), sizeof_part, error) CALL check("h5pset_external_f",error,total_error) - + cur_size(1) = 100 CALL h5screate_simple_f(1, cur_size, space, error) CALL check("h5screate_simple_f", error, total_error) @@ -629,7 +629,7 @@ SUBROUTINE external_test_offset(cleanup,total_error) EXIT ENDIF ENDDO - + CALL h5dclose_f(dset, error) CALL check("h5dclose_f", error, total_error) CALL h5pclose_f(dcpl, error) @@ -678,12 +678,12 @@ SUBROUTINE test_vds(total_error) CHARACTER(LEN=3), PARAMETER :: DATASET="VDS" INTEGER(hsize_t) :: VDSDIM0 INTEGER(hsize_t), PARAMETER :: VDSDIM1 = 10 - INTEGER(hsize_t), PARAMETER :: VDSDIM2 = 15 + INTEGER(hsize_t), PARAMETER :: VDSDIM2 = 15 INTEGER(hsize_t) :: DIM0 INTEGER, PARAMETER :: DIM0_1= 4 ! Initial size of the source datasets - INTEGER, PARAMETER :: DIM1 = 10 - INTEGER, PARAMETER :: DIM2 = 15 + INTEGER, PARAMETER :: DIM1 = 10 + INTEGER, PARAMETER :: DIM2 = 15 INTEGER, PARAMETER :: RANK = 3 INTEGER(hsize_t), PARAMETER :: PLANE_STRIDE = 4 @@ -709,15 +709,15 @@ SUBROUTINE test_vds(total_error) src_count, block INTEGER(hsize_t), DIMENSION(1:2,1:3) :: vdsdims_out_correct - INTEGER(hsize_t), DIMENSION(1:3) :: start_out, & !Hyperslab PARAMETER out + INTEGER(hsize_t), DIMENSION(1:3) :: start_out, & !Hyperslab PARAMETER out stride_out, count_out, block_out INTEGER(hsize_t), DIMENSION(1:3,1:PLANE_STRIDE) :: start_correct INTEGER :: i, j - INTEGER(size_t) :: i_sz + INTEGER(size_t) :: i_sz INTEGER :: layout ! Storage layout - INTEGER(size_t) :: num_map ! Number of mappings - INTEGER(size_t) :: len ! Length of the string also a RETURN value + INTEGER(size_t) :: num_map ! Number of mappings + INTEGER(size_t) :: len ! Length of the string also a RETURN value ! Different sized character buffers CHARACTER(len=LEN(SRC_FILE(1))-3) :: SRC_FILE_LEN_TINY CHARACTER(len=LEN(SRC_FILE(1))-1) :: SRC_FILE_LEN_SMALL @@ -726,7 +726,7 @@ SUBROUTINE test_vds(total_error) CHARACTER(len=LEN(SRC_FILE(1))+10) :: SRC_FILE_LEN_HUGE CHARACTER(len=LEN(SRC_DATASET(1))) :: SRC_DATASET_LEN_EXACT - INTEGER(HID_T) :: space_out + INTEGER(HID_T) :: space_out INTEGER :: s_type, virtual_view INTEGER :: type1, type2 @@ -735,13 +735,13 @@ SUBROUTINE test_vds(total_error) TYPE(C_PTR) :: f_ptr INTEGER(SIZE_T) :: nsize LOGICAL :: IsRegular - INTEGER(HSIZE_T) :: gap_size + INTEGER(HSIZE_T) :: gap_size ! For testing against vdsdims_out_correct(1,1) = DIM0_1*5 vdsdims_out_correct(2,1) = DIM0_1*8 - vdsdims_out_correct(1:2,2) = VDSDIM1 - vdsdims_out_correct(1:2,3) = VDSDIM2 + vdsdims_out_correct(1:2,2) = VDSDIM1 + vdsdims_out_correct(1:2,3) = VDSDIM2 VDSDIM0 = H5S_UNLIMITED_F DIM0 = H5S_UNLIMITED_F @@ -749,7 +749,7 @@ SUBROUTINE test_vds(total_error) dims_max = (/INT(DIM0,hsize_t), INT(DIM1,hsize_t), INT(DIM2,hsize_t)/) ! - ! Create source files and datasets. + ! Create source files and datasets. ! DO i = 1, PLANE_STRIDE ! @@ -758,7 +758,7 @@ SUBROUTINE test_vds(total_error) wdata(j) = i ENDDO ! - ! Create the source files and datasets. Write data to each dataset and + ! Create the source files and datasets. Write data to each dataset and ! close all resources. CALL h5fcreate_f(SRC_FILE(i), H5F_ACC_TRUNC_F, file, error) CALL check("h5fcreate_f", error, total_error) @@ -769,7 +769,7 @@ SUBROUTINE test_vds(total_error) CALL check("h5pcreate_f", error, total_error) CALL h5pset_chunk_f(dcpl, RANK, chunk_dims, error) CALL check("h5pset_chunk_f",error, total_error) - + CALL h5dcreate_f(file, SRC_DATASET(i), H5T_NATIVE_INTEGER, src_space, dset, error, dcpl, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5dcreate_f",error, total_error) f_ptr = C_LOC(wdata(1)) @@ -795,20 +795,20 @@ SUBROUTINE test_vds(total_error) ! Create dataspaces for the source dataset. CALL H5Screate_simple_f(RANK, dims, src_space, error, dims_max) CALL check("H5Screate_simple_f", error, total_error) - + ! Create VDS creation property CALL H5Pcreate_f (H5P_DATASET_CREATE_F, dcpl, error) CALL check("H5Pcreate_f", error, total_error) - - ! Initialize hyperslab values + + ! Initialize hyperslab values start(1:3) = 0 - stride(1:3) = (/PLANE_STRIDE,1_hsize_t,1_hsize_t/) ! we will select every fifth plane in VDS + stride(1:3) = (/PLANE_STRIDE,1_hsize_t,1_hsize_t/) ! we will select every fifth plane in VDS count(1:3) = (/H5S_UNLIMITED_F,1_hsize_t,1_hsize_t/) src_count(1:3) = (/H5S_UNLIMITED_F,1_hsize_t,1_hsize_t/) block(1:3) = (/1, DIM1, DIM2/) - - ! - ! Build the mappings + + ! + ! Build the mappings ! start_correct = 0 CALL H5Sselect_hyperslab_f(src_space, H5S_SELECT_SET_F, start, src_count, error, block=block) @@ -827,10 +827,10 @@ SUBROUTINE test_vds(total_error) start(1) = start(1) + 1 ENDDO - CALL H5Sselect_none_f(vspace, error) + CALL H5Sselect_none_f(vspace, error) CALL check("H5Sselect_none_f", error, total_error) - ! Create a virtual dataset + ! Create a virtual dataset CALL H5Dcreate_f(vfile, DATASET, H5T_NATIVE_INTEGER, vspace, vdset, error, dcpl, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("H5Dcreate_f", error, total_error) CALL H5Sclose_f(vspace, error) @@ -840,9 +840,9 @@ SUBROUTINE test_vds(total_error) CALL H5Pclose_f(dcpl, error) CALL check("H5Pclose_f", error, total_error) - ! Let's add data to the source datasets and check new dimensions for VDS + ! Let's add data to the source datasets and check new dimensions for VDS ! We will add only one plane to the first source dataset, two planes to the - ! second one, three to the third, and four to the forth. + ! second one, three to the third, and four to the forth. DO i = 1, PLANE_STRIDE ! @@ -852,15 +852,15 @@ SUBROUTINE test_vds(total_error) ENDDO ! - ! Open the source files and datasets. Append data to each dataset and + ! Open the source files and datasets. Append data to each dataset and ! close all resources. CALL H5Fopen_f (SRC_FILE(i), H5F_ACC_RDWR_F, file, error) CALL check("H5Fopen_f", error, total_error) CALL H5Dopen_f (file, SRC_DATASET(i), dset, error) CALL check("H5Dopen_f", error, total_error) extdims(1) = DIM0_1+i - CALL H5Dset_extent_f(dset, extdims, error) - CALL check("H5Dset_extent_f", error, total_error) + CALL H5Dset_extent_f(dset, extdims, error) + CALL check("H5Dset_extent_f", error, total_error) CALL H5Dget_space_f(dset, src_space, error) CALL check("H5Dget_space_f", error, total_error) @@ -870,13 +870,13 @@ SUBROUTINE test_vds(total_error) memdims(1) = i - CALL H5Screate_simple_f(RANK, memdims, mem_space, error) + CALL H5Screate_simple_f(RANK, memdims, mem_space, error) CALL check("H5Screate_simple_f", error, total_error) - CALL H5Sselect_hyperslab_f(src_space, H5S_SELECT_SET_F, start,count, error,block=block) + CALL H5Sselect_hyperslab_f(src_space, H5S_SELECT_SET_F, start,count, error,block=block) CALL check("H5Sselect_hyperslab_f", error, total_error) f_ptr = C_LOC(wdata(1)) - CALL H5Dwrite_f(dset, H5T_NATIVE_INTEGER, f_ptr, error, mem_space, src_space, H5P_DEFAULT_F) + CALL H5Dwrite_f(dset, H5T_NATIVE_INTEGER, f_ptr, error, mem_space, src_space, H5P_DEFAULT_F) CALL check("H5Dwrite_f", error, total_error) CALL H5Sclose_f(src_space, error) CALL check("H5Sclose_f", error, total_error) @@ -888,38 +888,38 @@ SUBROUTINE test_vds(total_error) call H5Dclose_f(vdset, error) CALL check("H5Dclose_f", error, total_error) - call H5Fclose_f(vfile, error) + call H5Fclose_f(vfile, error) CALL check("H5Fclose_f", error, total_error) - + ! ! begin the read section ! ! Open file and dataset using the default properties. CALL H5Fopen_f(VFILENAME, H5F_ACC_RDONLY_F, vfile, error) - CALL check("H5Fopen_f", error, total_error) - - ! + CALL check("H5Fopen_f", error, total_error) + + ! ! Open VDS using different access properties to use max or ! min extents depending on the sizes of the underlying datasets CALL H5Pcreate_f(H5P_DATASET_ACCESS_F, dapl, error) - CALL check("H5Pcreate_f", error, total_error) + CALL check("H5Pcreate_f", error, total_error) DO i = 1, 2 IF(i.NE.1)THEN CALL H5Pset_virtual_view_f(dapl, H5D_VDS_LAST_AVAILABLE_F, error) - CALL check("H5Pset_virtual_view_f", error, total_error) + CALL check("H5Pset_virtual_view_f", error, total_error) ELSE CALL H5Pset_virtual_view_f(dapl, H5D_VDS_FIRST_MISSING_F, error) - CALL check("H5Pset_virtual_view_f", error, total_error) + CALL check("H5Pset_virtual_view_f", error, total_error) ENDIF - + CALL H5Dopen_f(vfile, DATASET, vdset, error, dapl) - CALL check("H5Dopen_f", error, total_error) + CALL check("H5Dopen_f", error, total_error) ! Let's get space of the VDS and its dimension we should get 32(or 20)x10x10 CALL H5Dget_space_f(vdset, vspace, error) - CALL check("H5Dget_space_f", error, total_error) + CALL check("H5Dget_space_f", error, total_error) CALL H5Sget_simple_extent_dims_f(vspace, vdsdims_out, vdsdims_max_out, error) CALL check("H5Sget_simple_extent_dims_f", error, total_error) @@ -927,12 +927,12 @@ SUBROUTINE test_vds(total_error) DO j = 1, RANK IF(vdsdims_out(j).NE.vdsdims_out_correct(i,j))THEN total_error = total_error + 1 - EXIT + EXIT ENDIF ENDDO CALL H5Pget_virtual_view_f(dapl, virtual_view, error) - CALL check("h5pget_virtual_view_f", error, total_error) + CALL check("h5pget_virtual_view_f", error, total_error) IF(i.EQ.1)THEN IF(virtual_view .NE. H5D_VDS_FIRST_MISSING_F)THEN @@ -942,10 +942,10 @@ SUBROUTINE test_vds(total_error) IF(virtual_view .NE. H5D_VDS_LAST_AVAILABLE_F)THEN total_error = total_error + 1 ENDIF - + ENDIF - ! Close + ! Close CALL H5Dclose_f(vdset, error) CALL check("H5Dclose_f", error, total_error) CALL H5Sclose_f(vspace, error) @@ -957,7 +957,7 @@ SUBROUTINE test_vds(total_error) ! ! Get creation property list and mapping properties. - ! + ! CALL H5Dget_create_plist_f (vdset, dcpl, error) CALL check("H5Dget_create_plist_f", error, total_error) @@ -973,7 +973,7 @@ SUBROUTINE test_vds(total_error) ! ! Find number of mappings. - + CALL H5Pget_virtual_count_f(dcpl, num_map, error) CALL check("H5Pget_virtual_count_f", error, total_error) @@ -981,7 +981,7 @@ SUBROUTINE test_vds(total_error) PRINT*,"Number of mappings is incorrect" total_error = total_error + 1 ENDIF - ! + ! ! Get mapping parameters for each mapping. ! DO i_sz = 1, num_map @@ -1105,7 +1105,7 @@ SUBROUTINE test_vds(total_error) PRINT*,"gapsize is incorrect" total_error = total_error + 1 ENDIF - + CALL H5Dclose_f(vdset, error) CALL check("H5Dclose_f", error, total_error) CALL H5Sclose_f(vspace, error) @@ -1114,7 +1114,7 @@ SUBROUTINE test_vds(total_error) CALL check("H5Pclose_f", error, total_error) CALL H5Fclose_f(vfile, error) CALL check("H5Fclose_f", error, total_error) - + END SUBROUTINE test_vds diff --git a/fortran/test/tH5R.F90 b/fortran/test/tH5R.F90 index f7cccfa..708d290 100644 --- a/fortran/test/tH5R.F90 +++ b/fortran/test/tH5R.F90 @@ -21,7 +21,7 @@ ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ! ! NOTES -! Tests h5rcreate_f, h5rdereference_f, h5rget_name_f +! Tests h5rcreate_f, h5rdereference_f, h5rget_name_f ! and H5Rget_object_type functions ! ! CONTAINS SUBROUTINES @@ -262,20 +262,20 @@ SUBROUTINE refregtest(cleanup, total_error) INTEGER(HID_T) :: dsetv_id ! Dataset identifier INTEGER(HID_T) :: dsetr_id ! Dataset identifier INTEGER :: error -! TYPE(hdset_reg_ref_t_f) , DIMENSION(1:2), TARGET :: ref - TYPE(hdset_reg_ref_t_f) , DIMENSION(1:2) :: ref +! TYPE(hdset_reg_ref_t_f) , DIMENSION(1:2), TARGET :: ref + TYPE(hdset_reg_ref_t_f) , DIMENSION(1:2) :: ref TYPE(hdset_reg_ref_t_f) , DIMENSION(1:2) :: ref_out INTEGER(HSIZE_T), DIMENSION(2) :: ref_dim = (/0,0/) INTEGER(HSIZE_T), DIMENSION(2) :: data_dims ! = (/0,0/) INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/2,9/) ! Datasets dimensions - INTEGER(HSIZE_T), DIMENSION(1) :: dimsr = (/2/) ! + INTEGER(HSIZE_T), DIMENSION(1) :: dimsr = (/2/) ! INTEGER(HSIZE_T), DIMENSION(2) :: start ! = (/0,0/) INTEGER(HSIZE_T), DIMENSION(2) :: count ! = (/0,0/) INTEGER :: rankr = 1 INTEGER :: rank = 2 -! INTEGER , DIMENSION(2,9), TARGET :: DATA - INTEGER , DIMENSION(2,9) :: DATA +! INTEGER , DIMENSION(2,9), TARGET :: DATA + INTEGER , DIMENSION(2,9) :: DATA INTEGER , DIMENSION(2,9) :: data_out = 0 INTEGER(HSIZE_T) , DIMENSION(2,3) :: coord INTEGER(SIZE_T) ::num_points = 3 ! Number of selected points @@ -353,7 +353,7 @@ SUBROUTINE refregtest(cleanup, total_error) CALL check("h5sselect_hyperslab_f", error, total_error) ref(1)%ref(:) = 0 ! f_ptr = C_LOC(ref(1)) -! CALL h5rcreate_f(file_id, dsetnamev, 1, space_id, f_ptr, error) +! CALL h5rcreate_f(file_id, dsetnamev, 1, space_id, f_ptr, error) CALL h5rcreate_f(file_id, dsetnamev, space_id, ref(1), error) CALL check("h5rcreate_f", error, total_error) diff --git a/fortran/test/tH5S.F90 b/fortran/test/tH5S.F90 index a4f5f4a..a839d8b 100644 --- a/fortran/test/tH5S.F90 +++ b/fortran/test/tH5S.F90 @@ -176,14 +176,14 @@ CONTAINS CALL check("h5sget_simple_extent_type_f", error, total_error) IF (classtype .NE. 1) write(*,*)"class type not H5S_SIMPLE_f" - ! + ! !set the copied space to none before extend the dimensions. ! CALL h5sset_extent_none_f(space2_id, error) CALL check("h5sset_extent_none_f", error, total_error) ! - !set the copied space to dim2 size. + !set the copied space to dim2 size. ! CALL h5sset_extent_simple_f(space2_id, rank2, dims2, maxdims2, error) CALL check("h5sset_extent_simple_f", error, total_error) diff --git a/fortran/test/tH5Sselect.F90 b/fortran/test/tH5Sselect.F90 index 8415bce..5f7ece7 100644 --- a/fortran/test/tH5Sselect.F90 +++ b/fortran/test/tH5Sselect.F90 @@ -26,12 +26,12 @@ ! h5sselect_none_f, h5sselect_valid_f, h5sselect_hyperslab_f, ! h5sget_select_bounds_f, h5sget_select_elem_pointlist_f, ! h5sget_select_elem_npoints_f, h5sget_select_hyper_blocklist_f, -! h5sget_select_hyper_nblocks_f, h5sget_select_npoints_f +! h5sget_select_hyper_nblocks_f, h5sget_select_npoints_f ! ! CONTAINS SUBROUTINES ! test_select_hyperslab, test_select_element, test_basic_select, ! test_select_point, test_select_combine, test_select_bounds -! +! ! !***** MODULE TH5SSELECT @@ -1033,12 +1033,12 @@ CONTAINS !*************************************************************** SUBROUTINE test_select_point(cleanup, total_error) - + IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T) :: xfer_plist - + INTEGER, PARAMETER :: SPACE1_DIM1=3 INTEGER, PARAMETER :: SPACE1_DIM2=15 INTEGER, PARAMETER :: SPACE1_DIM3=13 @@ -1046,36 +1046,36 @@ SUBROUTINE test_select_point(cleanup, total_error) INTEGER, PARAMETER :: SPACE2_DIM2=26 INTEGER, PARAMETER :: SPACE3_DIM1=15 INTEGER, PARAMETER :: SPACE3_DIM2=26 - + INTEGER, PARAMETER :: SPACE1_RANK=3 INTEGER, PARAMETER :: SPACE2_RANK=2 INTEGER, PARAMETER :: SPACE3_RANK=2 - - ! Element selection information + + ! Element selection information INTEGER, PARAMETER :: POINT1_NPOINTS=10 - INTEGER(hid_t) ::fid1 ! HDF5 File IDs - INTEGER(hid_t) ::dataset ! Dataset ID - INTEGER(hid_t) ::sid1,sid2 ! Dataspace ID + INTEGER(hid_t) ::fid1 ! HDF5 File IDs + INTEGER(hid_t) ::dataset ! Dataset ID + INTEGER(hid_t) ::sid1,sid2 ! Dataspace ID INTEGER(hsize_t), DIMENSION(1:3) :: dims1 = (/SPACE1_DIM1, SPACE1_DIM2, SPACE1_DIM3/) INTEGER(hsize_t), DIMENSION(1:2) :: dims2 = (/SPACE2_DIM1, SPACE2_DIM2/) INTEGER(hsize_t), DIMENSION(1:2) :: dims3 = (/SPACE3_DIM1, SPACE3_DIM2/) - - INTEGER(hsize_t), DIMENSION(1:SPACE1_RANK,1:POINT1_NPOINTS) :: coord1 ! Coordinates for point selection - INTEGER(hsize_t), DIMENSION(1:SPACE1_RANK,1:POINT1_NPOINTS) :: temp_coord1 ! Coordinates for point selection - INTEGER(hsize_t), DIMENSION(1:SPACE2_RANK,1:POINT1_NPOINTS) :: coord2 ! Coordinates for point selection - INTEGER(hsize_t), DIMENSION(1:SPACE2_RANK,1:POINT1_NPOINTS) :: temp_coord2 ! Coordinates for point selection - INTEGER(hsize_t), DIMENSION(1:SPACE3_RANK,1:POINT1_NPOINTS) :: coord3 ! Coordinates for point selection - INTEGER(hsize_t), DIMENSION(1:SPACE3_RANK,1:POINT1_NPOINTS) :: temp_coord3 ! Coordinates for point selection + + INTEGER(hsize_t), DIMENSION(1:SPACE1_RANK,1:POINT1_NPOINTS) :: coord1 ! Coordinates for point selection + INTEGER(hsize_t), DIMENSION(1:SPACE1_RANK,1:POINT1_NPOINTS) :: temp_coord1 ! Coordinates for point selection + INTEGER(hsize_t), DIMENSION(1:SPACE2_RANK,1:POINT1_NPOINTS) :: coord2 ! Coordinates for point selection + INTEGER(hsize_t), DIMENSION(1:SPACE2_RANK,1:POINT1_NPOINTS) :: temp_coord2 ! Coordinates for point selection + INTEGER(hsize_t), DIMENSION(1:SPACE3_RANK,1:POINT1_NPOINTS) :: coord3 ! Coordinates for point selection + INTEGER(hsize_t), DIMENSION(1:SPACE3_RANK,1:POINT1_NPOINTS) :: temp_coord3 ! Coordinates for point selection INTEGER(hssize_t) :: npoints -!!$ uint8_t *wbuf, buffer to write to disk -!!$ *rbuf, buffer read from disk -!!$ *tbuf; temporary buffer pointer - INTEGER :: i,j; ! Counters -! struct pnt_iter pi; Custom Pointer iterator struct - INTEGER :: error ! Generic return value +!!$ uint8_t *wbuf, buffer to write to disk +!!$ *rbuf, buffer read from disk +!!$ *tbuf; temporary buffer pointer + INTEGER :: i,j; ! Counters +! struct pnt_iter pi; Custom Pointer iterator struct + INTEGER :: error ! Generic return value CHARACTER(LEN=9) :: filename = 'h5s_hyper' - CHARACTER(LEN=80) :: fix_filename + CHARACTER(LEN=80) :: fix_filename CHARACTER(LEN=1), DIMENSION(1:SPACE2_DIM1,1:SPACE2_DIM2) :: wbuf CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) @@ -1086,11 +1086,11 @@ SUBROUTINE test_select_point(cleanup, total_error) xfer_plist = H5P_DEFAULT_F ! MESSAGE(5, ("Testing Element Selection Functions\n")); - ! Allocate write & read buffers + ! Allocate write & read buffers !!$ wbuf = HDmalloc(sizeof(uint8_t) * SPACE2_DIM1 * SPACE2_DIM2); !!$ rbuf = HDcalloc(sizeof(uint8_t), (size_t)(SPACE3_DIM1 * SPACE3_DIM2)); !!$ - ! Initialize WRITE buffer + ! Initialize WRITE buffer DO i = 1, SPACE2_DIM1 DO j = 1, SPACE2_DIM2 @@ -1101,20 +1101,20 @@ SUBROUTINE test_select_point(cleanup, total_error) !!$ for(i=0, tbuf=wbuf; i<SPACE2_DIM1; i++) !!$ for(j=0; j<SPACE2_DIM2; j++) !!$ *tbuf++=(uint8_t)((i*SPACE2_DIM2)+j); - - ! Create file + + ! Create file CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, fid1, error) CALL check("h5fcreate_f", error, total_error) - - ! Create dataspace for dataset + + ! Create dataspace for dataset CALL h5screate_simple_f(SPACE1_RANK, dims1, sid1, error) CALL check("h5screate_simple_f", error, total_error) - ! Create dataspace for write buffer + ! Create dataspace for write buffer CALL h5screate_simple_f(SPACE2_RANK, dims2, sid2, error) CALL check("h5screate_simple_f", error, total_error) - ! Select sequence of ten points for disk dataset + ! Select sequence of ten points for disk dataset coord1(1,1)=1; coord1(2,1)=11; coord1(3,1)= 6; coord1(1,2)=2; coord1(2,2)= 3; coord1(3,2)= 8; coord1(1,3)=3; coord1(2,3)= 5; coord1(3,3)=10; @@ -1129,7 +1129,7 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL h5sselect_elements_f(sid1, H5S_SELECT_SET_F, SPACE1_RANK, INT(POINT1_NPOINTS,size_t), coord1, error) CALL check("h5sselect_elements_f", error, total_error) - ! Verify correct elements selected + ! Verify correct elements selected CALL h5sget_select_elem_pointlist_f(sid1, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord1,error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) @@ -1144,7 +1144,7 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_npoints_f", error, total_error) CALL verify("h5sget_select_npoints_f", INT(npoints), 10, total_error) - ! Append another sequence of ten points to disk dataset + ! Append another sequence of ten points to disk dataset coord1(1,1)=1; coord1(2,1)=3; coord1(3,1)= 1; coord1(1,2)=2; coord1(2,2)=11; coord1(3,2)= 9; @@ -1160,8 +1160,8 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL h5sselect_elements_f(sid1, H5S_SELECT_APPEND_F, SPACE1_RANK, INT(POINT1_NPOINTS,size_t), coord1, error) CALL check("h5sselect_elements_f", error, total_error) - ! Verify correct elements selected - + ! Verify correct elements selected + CALL h5sget_select_elem_pointlist_f(sid1, INT(POINT1_NPOINTS,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord1,error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) @@ -1175,7 +1175,7 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_npoints_f", error, total_error) CALL verify("h5sget_select_npoints_f", INT(npoints), 20, total_error) - ! Select sequence of ten points for memory dataset + ! Select sequence of ten points for memory dataset coord2(1,1)=13; coord2(2,1)= 4; coord2(1,2)=16; coord2(2,2)=14; coord2(1,3)= 8; coord2(2,3)=26; @@ -1191,8 +1191,8 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sselect_elements_f", error, total_error) - ! Verify correct elements selected - + ! Verify correct elements selected + CALL h5sget_select_elem_pointlist_f(sid2, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord2,error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) @@ -1202,9 +1202,9 @@ SUBROUTINE test_select_point(cleanup, total_error) ENDDO !!$ -!!$ Save points for later iteration -!!$ (these are in the second half of the buffer, because we are prepending -!!$ the next list of points to the beginning of the point selection list) +!!$ Save points for later iteration +!!$ (these are in the second half of the buffer, because we are prepending +!!$ the next list of points to the beginning of the point selection list) !!$ HDmemcpy(((char *)pi.coord)+sizeof(coord2),coord2,sizeof(coord2)); !!$ @@ -1212,7 +1212,7 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_npoints_f", error, total_error) CALL verify("h5sget_select_npoints_f", INT(npoints), 10, total_error) - ! Append another sequence of ten points to memory dataset + ! Append another sequence of ten points to memory dataset coord2(1,1)=25; coord2(2,1)= 1; coord2(1,2)= 3; coord2(2,2)=26; coord2(1,3)=14; coord2(2,3)=18; @@ -1228,7 +1228,7 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sselect_elements_f", error, total_error) - ! Verify correct elements selected + ! Verify correct elements selected CALL h5sget_select_elem_pointlist_f(sid2, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord2,error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) @@ -1241,26 +1241,26 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_npoints_f", error, total_error) CALL verify("h5sget_select_npoints_f", INT(npoints), 20, total_error) -!!$ Save points for later iteration +!!$ Save points for later iteration !!$ HDmemcpy(pi.coord,coord2,sizeof(coord2)); - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(fid1, "Dataset1", H5T_NATIVE_CHARACTER, sid1, dataset, error) CALL check("h5dcreate_f", error, total_error) - ! Write selection to disk + ! Write selection to disk CALL h5dwrite_f(dataset, H5T_NATIVE_CHARACTER, wbuf, dims2, error, sid2, sid1, xfer_plist) CALL check("h5dwrite_f", error, total_error) - ! Close memory dataspace + ! Close memory dataspace CALL h5sclose_f(sid2, error) CALL check("h5sclose_f", error, total_error) - ! Create dataspace for reading buffer + ! Create dataspace for reading buffer CALL h5screate_simple_f(SPACE3_RANK, dims3, sid2, error) CALL check("h5screate_simple_f", error, total_error) - ! Select sequence of points for read dataset + ! Select sequence of points for read dataset coord3(1,1)= 1; coord3(2,1)= 3; coord3(1,2)= 5; coord3(2,2)= 9; coord3(1,3)=14; coord3(2,3)=14; @@ -1275,7 +1275,7 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL h5sselect_elements_f(sid2, H5S_SELECT_SET_F, SPACE3_RANK, INT(POINT1_NPOINTS,size_t), coord3, error) CALL check("h5sselect_elements_f", error, total_error) - ! Verify correct elements selected + ! Verify correct elements selected CALL h5sget_select_elem_pointlist_f(sid2, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord3,error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) DO i= 1, POINT1_NPOINTS @@ -1287,7 +1287,7 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_npoints_f", error, total_error) CALL verify("h5sget_select_npoints_f", INT(npoints), 10, total_error) - ! Append another sequence of ten points to disk dataset + ! Append another sequence of ten points to disk dataset coord3(1,1)=15; coord3(2,1)=26; coord3(1,2)= 1; coord3(2,2)= 1; coord3(1,3)=12; coord3(2,3)=12; @@ -1302,7 +1302,7 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL h5sselect_elements_f(sid2, H5S_SELECT_APPEND_F, SPACE3_RANK, INT(POINT1_NPOINTS,size_t), coord3, error) CALL check("h5sselect_elements_f", error, total_error) - ! Verify correct elements selected + ! Verify correct elements selected CALL h5sget_select_elem_pointlist_f(sid2, INT(POINT1_NPOINTS,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord3,error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) DO i= 1, POINT1_NPOINTS @@ -1315,11 +1315,11 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL verify("h5sget_select_npoints_f", INT(npoints), 20, total_error) ! F2003 feature -!!$ Read selection from disk +!!$ Read selection from disk !!$ ret=H5Dread(dataset,H5T_NATIVE_UCHAR,sid2,sid1,xfer_plist,rbuf); !!$ CHECK(ret, FAIL, "H5Dread"); !!$ -!!$ Check that the values match with a dataset iterator +!!$ Check that the values match with a dataset iterator !!$ pi.buf=wbuf; !!$ pi.offset=0; !!$ ret = H5Diterate(rbuf,H5T_NATIVE_UCHAR,sid2,test_select_point_iter1,&pi); @@ -1327,19 +1327,19 @@ SUBROUTINE test_select_point(cleanup, total_error) !!$ ! F2003 feature - ! Close memory dataspace + ! Close memory dataspace CALL h5sclose_f(sid2, error) CALL check("h5sclose_f", error, total_error) - ! Close disk dataspace + ! Close disk dataspace CALL h5sclose_f(sid1, error) CALL check("h5sclose_f", error, total_error) - ! Close Dataset + ! Close Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f", error, total_error) - ! Close file + ! Close file CALL h5fclose_f(fid1, error) CALL check("h5fclose_f", error, total_error) @@ -1358,34 +1358,34 @@ END SUBROUTINE test_select_point !*************************************************************** SUBROUTINE test_select_combine(total_error) - + IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER, PARAMETER :: SPACE7_RANK = 2 INTEGER, PARAMETER :: SPACE7_DIM1 = 10 INTEGER, PARAMETER :: SPACE7_DIM2 = 10 - - INTEGER(hid_t) :: base_id ! Base dataspace for test - INTEGER(hid_t) :: all_id ! Dataspace for "all" selection - INTEGER(hid_t) :: none_id ! Dataspace for "none" selection - INTEGER(hid_t) :: space1 ! Temporary dataspace #1 - INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: start ! Hyperslab start - INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: stride ! Hyperslab stride - INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: icount ! Hyperslab count - INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: iblock ! Hyperslab BLOCK - INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: dims = (/SPACE7_DIM1,SPACE7_DIM2/) ! Dimensions of dataspace - INTEGER :: sel_type ! Selection type - INTEGER(hssize_t) :: nblocks ! Number of hyperslab blocks - INTEGER(hsize_t), DIMENSION(1:128,1:2,1:SPACE7_RANK) :: blocks ! List of blocks + + INTEGER(hid_t) :: base_id ! Base dataspace for test + INTEGER(hid_t) :: all_id ! Dataspace for "all" selection + INTEGER(hid_t) :: none_id ! Dataspace for "none" selection + INTEGER(hid_t) :: space1 ! Temporary dataspace #1 + INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: start ! Hyperslab start + INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: stride ! Hyperslab stride + INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: icount ! Hyperslab count + INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: iblock ! Hyperslab BLOCK + INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: dims = (/SPACE7_DIM1,SPACE7_DIM2/) ! Dimensions of dataspace + INTEGER :: sel_type ! Selection type + INTEGER(hssize_t) :: nblocks ! Number of hyperslab blocks + INTEGER(hsize_t), DIMENSION(1:128,1:2,1:SPACE7_RANK) :: blocks ! List of blocks INTEGER :: error, area - ! Create dataspace for dataset on disk + ! Create dataspace for dataset on disk CALL h5screate_simple_f(SPACE7_RANK, dims, base_id, error) CALL check("h5screate_simple_f", error, total_error) - ! Copy base dataspace and set selection to "all" - CALL h5scopy_f(base_id, all_id, error) + ! Copy base dataspace and set selection to "all" + CALL h5scopy_f(base_id, all_id, error) CALL check("h5scopy_f", error, total_error) CALL H5Sselect_all_f(all_id, error) @@ -1395,8 +1395,8 @@ SUBROUTINE test_select_combine(total_error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_ALL_F), total_error) - ! Copy base dataspace and set selection to "none" - CALL h5scopy_f(base_id, none_id, error) + ! Copy base dataspace and set selection to "none" + CALL h5scopy_f(base_id, none_id, error) CALL check("h5scopy_f", error, total_error) CALL H5Sselect_none_f(none_id, error) @@ -1405,100 +1405,100 @@ SUBROUTINE test_select_combine(total_error) CALL H5Sget_select_type_f(none_id, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_NONE_F), total_error) - - ! Copy "all" selection & space - CALL H5Scopy_f(all_id, space1, error) + + ! Copy "all" selection & space + CALL H5Scopy_f(all_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'OR' "all" selection with another hyperslab + ! 'OR' "all" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) CALL h5sselect_hyperslab_f(space1, H5S_SELECT_OR_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that it's still "all" selection + ! Verify that it's still "all" selection CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_ALL_F), total_error) - ! Close temporary dataspace + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "all" selection & space - CALL H5Scopy_f(all_id, space1, error) + ! Copy "all" selection & space + CALL H5Scopy_f(all_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'AND' "all" selection with another hyperslab + ! 'AND' "all" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) CALL h5sselect_hyperslab_f(space1, H5S_SELECT_AND_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is the same at the original block + ! Verify that the new selection is the same at the original block CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) - ! Verify that there is only one block + ! Verify that there is only one block CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) - - ! Retrieve the block defined + + ! Retrieve the block defined CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error) CALL check("h5sget_select_hyper_blocklist_f", error, total_error) - ! Verify that the correct block is defined + ! Verify that the correct block is defined CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) - ! Close temporary dataspace + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "all" selection & space - CALL H5Scopy_f(all_id, space1, error) + ! Copy "all" selection & space + CALL H5Scopy_f(all_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'XOR' "all" selection with another hyperslab + ! 'XOR' "all" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) CALL h5sselect_hyperslab_f(space1, H5S_SELECT_XOR_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is an inversion of the original block + ! Verify that the new selection is an inversion of the original block CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) - ! Verify that there are two blocks + ! Verify that there are two blocks CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 2, total_error) - ! Retrieve the block defined + ! Retrieve the block defined - blocks = -1 ! Reset block list + blocks = -1 ! Reset block list CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error) CALL check("h5sget_select_hyper_blocklist_f", error, total_error) - ! Verify that the correct block is defined + ! Verify that the correct block is defined - ! No guarantee is implied as the order in which blocks are listed. + ! No guarantee is implied as the order in which blocks are listed. ! So this will ONLY work for square domains iblock(1:2) = (/5,5/) !!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) !!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 5, total_error) @@ -1514,42 +1514,42 @@ SUBROUTINE test_select_combine(total_error) area = area + (ABS(INT(blocks(5,1,1)-blocks(7,1,1)))+1)*(ABS(INT(blocks(6,1,1)-blocks(8,1,1)))+1) CALL verify("h5sget_select_hyper_blocklist_f", area, 80, total_error) - ! Close temporary dataspace + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "all" selection & space - CALL H5Scopy_f(all_id, space1, error) + ! Copy "all" selection & space + CALL H5Scopy_f(all_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'NOTB' "all" selection with another hyperslab + ! 'NOTB' "all" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) !5 CALL h5sselect_hyperslab_f(space1, H5S_SELECT_NOTB_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is an inversion of the original block + ! Verify that the new selection is an inversion of the original block CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) - ! Verify that there are two blocks + ! Verify that there are two blocks CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 2, total_error) - ! Retrieve the block defined - blocks = -1 ! Reset block list + ! Retrieve the block defined + blocks = -1 ! Reset block list CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error) CALL check("h5sget_select_hyper_blocklist_f", error, total_error) - ! Verify that the correct block is defined + ! Verify that the correct block is defined - ! No guarantee is implied as the order in which blocks are listed. + ! No guarantee is implied as the order in which blocks are listed. ! So this will ONLY work for square domains iblock(1:2) = (/5,5/) !!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) @@ -1567,200 +1567,200 @@ SUBROUTINE test_select_combine(total_error) CALL verify("h5sget_select_hyper_blocklist_f", area, 80, total_error) - ! Close temporary dataspace + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "all" selection & space - CALL H5Scopy_f(all_id, space1, error) + ! Copy "all" selection & space + CALL H5Scopy_f(all_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'NOTA' "all" selection with another hyperslab + ! 'NOTA' "all" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) !5 CALL h5sselect_hyperslab_f(space1, H5S_SELECT_NOTA_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is the "none" selection + ! Verify that the new selection is the "none" selection CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) - ! Close temporary dataspace + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "none" selection & space - CALL H5Scopy_f(none_id, space1, error) + ! Copy "none" selection & space + CALL H5Scopy_f(none_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'OR' "none" selection with another hyperslab + ! 'OR' "none" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) !5 CALL h5sselect_hyperslab_f(space1, H5S_SELECT_OR_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is the same as the original hyperslab + ! Verify that the new selection is the same as the original hyperslab CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) - - ! Verify that there is only one block + + ! Verify that there is only one block CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) - ! Retrieve the block defined - blocks = -1 ! Reset block list + ! Retrieve the block defined + blocks = -1 ! Reset block list CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error) CALL check("h5sget_select_hyper_blocklist_f", error, total_error) - ! Verify that the correct block is defined + ! Verify that the correct block is defined CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) - ! Close temporary dataspace + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "none" selection & space - CALL H5Scopy_f(none_id, space1, error) + ! Copy "none" selection & space + CALL H5Scopy_f(none_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'AND' "none" selection with another hyperslab + ! 'AND' "none" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) !5 CALL h5sselect_hyperslab_f(space1, H5S_SELECT_AND_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is the "none" selection + ! Verify that the new selection is the "none" selection CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) - ! Close temporary dataspace + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "none" selection & space - CALL H5Scopy_f(none_id, space1, error) + ! Copy "none" selection & space + CALL H5Scopy_f(none_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'XOR' "none" selection with another hyperslab + ! 'XOR' "none" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) !5 CALL h5sselect_hyperslab_f(space1, H5S_SELECT_XOR_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is the same as the original hyperslab + ! Verify that the new selection is the same as the original hyperslab CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) - - ! Verify that there is only one block + + ! Verify that there is only one block CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) - ! Retrieve the block defined - blocks = -1 ! Reset block list + ! Retrieve the block defined + blocks = -1 ! Reset block list CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error) CALL check("h5sget_select_hyper_blocklist_f", error, total_error) - ! Verify that the correct block is defined + ! Verify that the correct block is defined CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) - - ! Close temporary dataspace + + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "none" selection & space - CALL H5Scopy_f(none_id, space1, error) + ! Copy "none" selection & space + CALL H5Scopy_f(none_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'NOTB' "none" selection with another hyperslab + ! 'NOTB' "none" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 iblock(1:2) = (/5,4/) !5 CALL h5sselect_hyperslab_f(space1, H5S_SELECT_NOTB_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is the "none" selection + ! Verify that the new selection is the "none" selection CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) - ! Close temporary dataspace + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Copy "none" selection & space - CALL H5Scopy_f(none_id, space1, error) + ! Copy "none" selection & space + CALL H5Scopy_f(none_id, space1, error) CALL check("h5scopy_f", error, total_error) - ! 'NOTA' "none" selection with another hyperslab + ! 'NOTA' "none" selection with another hyperslab start(1:2) = 0 stride(1:2) = 1 icount(1:2) = 1 - iblock(1:2) = (/5,4/) !5 + iblock(1:2) = (/5,4/) !5 CALL h5sselect_hyperslab_f(space1, H5S_SELECT_NOTA_F, start, & - icount, error, stride, iblock) + icount, error, stride, iblock) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Verify that the new selection is the same as the original hyperslab + ! Verify that the new selection is the same as the original hyperslab CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) - - ! Verify that there is ONLY one BLOCK + + ! Verify that there is ONLY one BLOCK CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) - ! Retrieve the block defined + ! Retrieve the block defined - blocks = -1 ! Reset block list + blocks = -1 ! Reset block list CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error) CALL check("h5sget_select_hyper_blocklist_f", error, total_error) - ! Verify that the correct block is defined + ! Verify that the correct block is defined CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) - - ! Close temporary dataspace + + ! Close temporary dataspace CALL h5sclose_f(space1, error) CALL check("h5sclose_f", error, total_error) - ! Close dataspaces - + ! Close dataspaces + CALL h5sclose_f(base_id, error) CALL check("h5sclose_f", error, total_error) CALL h5sclose_f(all_id, error) @@ -1778,7 +1778,7 @@ END SUBROUTINE test_select_combine !*************************************************************** SUBROUTINE test_select_bounds(total_error) - + IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -1786,25 +1786,25 @@ SUBROUTINE test_select_bounds(total_error) INTEGER, PARAMETER :: SPACE11_DIM1=100 INTEGER, PARAMETER :: SPACE11_DIM2=50 INTEGER, PARAMETER :: SPACE11_NPOINTS=4 - - INTEGER(hid_t) :: sid ! Dataspace ID + + INTEGER(hid_t) :: sid ! Dataspace ID INTEGER(hsize_t), DIMENSION(1:SPACE11_RANK) :: dims = (/SPACE11_DIM1, SPACE11_DIM2/) !Dataspace dimensions INTEGER(hsize_t), DIMENSION(SPACE11_RANK, SPACE11_NPOINTS) :: coord ! Coordinates for point selection - INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: start ! The start of the hyperslab - INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: stride ! The stride between block starts for the hyperslab - INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: count ! The number of blocks for the hyperslab - INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: BLOCK ! The size of each block for the hyperslab - INTEGER(hssize_t), DIMENSION(SPACE11_RANK) :: offset ! Offset amount for selection - INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: low_bounds ! The low bounds for the selection - INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: high_bounds ! The high bounds for the selection - + INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: start ! The start of the hyperslab + INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: stride ! The stride between block starts for the hyperslab + INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: count ! The number of blocks for the hyperslab + INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: BLOCK ! The size of each block for the hyperslab + INTEGER(hssize_t), DIMENSION(SPACE11_RANK) :: offset ! Offset amount for selection + INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: low_bounds ! The low bounds for the selection + INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: high_bounds ! The high bounds for the selection + INTEGER :: error - ! Create dataspace + ! Create dataspace CALL h5screate_simple_f(SPACE11_RANK, dims, sid, error) CALL check("h5screate_simple_f", error, total_error) - ! Get bounds for 'all' selection + ! Get bounds for 'all' selection CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) @@ -1813,12 +1813,12 @@ SUBROUTINE test_select_bounds(total_error) CALL verify("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1, hsize_t), total_error) CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2, hsize_t), total_error) - ! Set offset for selection + ! Set offset for selection offset(1:2) = 1 CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Get bounds for 'all' selection with offset (which should be ignored) + ! Get bounds for 'all' selection with offset (which should be ignored) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) @@ -1827,21 +1827,21 @@ SUBROUTINE test_select_bounds(total_error) CALL VERIFY("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1, hsize_t), total_error) CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2, hsize_t), total_error) - ! Reset offset for selection + ! Reset offset for selection offset(1:2) = 0 CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Set 'none' selection + ! Set 'none' selection CALL H5Sselect_none_f(sid, error) CALL check("H5Sselect_none_f", error, total_error) - ! Get bounds for 'none' selection, should fail + ! Get bounds for 'none' selection, should fail CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL verify("h5sget_select_bounds_f", error, -1, total_error) - ! Set point selection - + ! Set point selection + coord(1,1)= 3; coord(2,1)= 3; coord(1,2)= 3; coord(2,2)= 46; coord(1,3)= 96; coord(2,3)= 3; @@ -1850,7 +1850,7 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sselect_elements_f(sid, H5S_SELECT_SET_F, SPACE11_RANK, INT(SPACE11_NPOINTS,size_t), coord, error) CALL check("h5sselect_elements_f", error, total_error) - ! Get bounds for point selection + ! Get bounds for point selection CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) @@ -1859,22 +1859,22 @@ SUBROUTINE test_select_bounds(total_error) CALL VERIFY("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1-4,hsize_t), total_error) CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2-4,hsize_t), total_error) - ! Set bad offset for selection + ! Set bad offset for selection offset(1:2) = (/5,-5/) CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Get bounds for hyperslab selection with negative offset + ! Get bounds for hyperslab selection with negative offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL verify("h5sget_select_bounds_f", error, -1, total_error) - - ! Set valid offset for selection + + ! Set valid offset for selection offset(1:2) = (/2,-2/) CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Get bounds for point selection with offset + ! Get bounds for point selection with offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) @@ -1883,22 +1883,22 @@ SUBROUTINE test_select_bounds(total_error) CALL verify("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1-2,hsize_t), total_error) CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2-6,hsize_t), total_error) - ! Reset offset for selection + ! Reset offset for selection offset(1:2) = 0 CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Set "regular" hyperslab selection + ! Set "regular" hyperslab selection start(1:2) = 2 stride(1:2) = 10 count(1:2) = 4 block(1:2) = 5 - + CALL h5sselect_hyperslab_f(sid, H5S_SELECT_SET_F, start, & - count, error, stride, block) + count, error, stride, block) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Get bounds for hyperslab selection + ! Get bounds for hyperslab selection CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) @@ -1907,21 +1907,21 @@ SUBROUTINE test_select_bounds(total_error) CALL verify("h5sget_select_bounds_f", high_bounds(1), 37_hsize_t, total_error) CALL verify("h5sget_select_bounds_f", high_bounds(2), 37_hsize_t, total_error) - ! Set bad offset for selection + ! Set bad offset for selection offset(1:2) = (/5,-5/) CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Get bounds for hyperslab selection with negative offset + ! Get bounds for hyperslab selection with negative offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL verify("h5sget_select_bounds_f", error, -1, total_error) - ! Set valid offset for selection + ! Set valid offset for selection offset(1:2) = (/5,-2/) CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Get bounds for hyperslab selection with offset + ! Get bounds for hyperslab selection with offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) @@ -1930,22 +1930,22 @@ SUBROUTINE test_select_bounds(total_error) CALL verify("h5sget_select_bounds_f", high_bounds(1), 42_hsize_t, total_error) CALL verify("h5sget_select_bounds_f", high_bounds(2), 35_hsize_t, total_error) - ! Reset offset for selection + ! Reset offset for selection offset(1:2) = 0 CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - - ! Make "irregular" hyperslab selection + + ! Make "irregular" hyperslab selection start(1:2) = 20 stride(1:2) = 20 count(1:2) = 2 block(1:2) = 10 CALL h5sselect_hyperslab_f(sid, H5S_SELECT_OR_F, start, & - count, error, stride, block) + count, error, stride, block) CALL check("h5sselect_hyperslab_f", error, total_error) - ! Get bounds for hyperslab selection + ! Get bounds for hyperslab selection CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) @@ -1954,21 +1954,21 @@ SUBROUTINE test_select_bounds(total_error) CALL verify("h5sget_select_bounds_f", high_bounds(1), 50_hsize_t, total_error) CALL verify("h5sget_select_bounds_f", high_bounds(2), 50_hsize_t, total_error) - ! Set bad offset for selection + ! Set bad offset for selection offset(1:2) = (/5,-5/) CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Get bounds for hyperslab selection with negative offset + ! Get bounds for hyperslab selection with negative offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL verify("h5sget_select_bounds_f", error, -1, total_error) - ! Set valid offset for selection + ! Set valid offset for selection offset(1:2) = (/5,-2/) CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Get bounds for hyperslab selection with offset + ! Get bounds for hyperslab selection with offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) @@ -1977,12 +1977,12 @@ SUBROUTINE test_select_bounds(total_error) CALL verify("h5sget_select_bounds_f", high_bounds(1), 55_hsize_t, total_error) CALL verify("h5sget_select_bounds_f", high_bounds(2), 48_hsize_t, total_error) - ! Reset offset for selection + ! Reset offset for selection offset(1:2) = 0 CALL H5Soffset_simple_f(sid, offset, error) CALL check("H5Soffset_simple_f", error, total_error) - ! Close the dataspace + ! Close the dataspace CALL h5sclose_f(sid, error) CALL check("h5sclose_f", error, total_error) diff --git a/fortran/test/tH5T.F90 b/fortran/test/tH5T.F90 index a986ba6..51e1a23 100644 --- a/fortran/test/tH5T.F90 +++ b/fortran/test/tH5T.F90 @@ -113,7 +113,7 @@ CONTAINS INTEGER(HID_T) :: fixed_str1, fixed_str2 LOGICAL :: are_equal - INTEGER(SIZE_T), PARAMETER :: str_size = 10 + INTEGER(SIZE_T), PARAMETER :: str_size = 10 INTEGER(SIZE_T) :: query_size ! Test h5tcreate_f with H5T_STRING_F option: @@ -125,34 +125,34 @@ CONTAINS CALL check("h5tset_size_f", error, total_error) CALL h5tset_strpad_f(fixed_str1, H5T_STR_NULLTERM_F, error) CALL check("h5tset_strpad_f", error, total_error) - + CALL h5tcreate_f(H5T_STRING_F, str_size, fixed_str2, error) CALL check("h5tcreate_f", error, total_error) CALL h5tset_strpad_f(fixed_str2, H5T_STR_NULLTERM_F, error) CALL check("h5tset_strpad_f", error, total_error) - + CALL h5tequal_f(fixed_str1, fixed_str2, are_equal, error) IF(.NOT.are_equal)THEN CALL check("h5tcreate_f", -1, total_error) ENDIF - + CALL h5tget_size_f(fixed_str1, query_size, error) CALL check("h5tget_size_f", error, total_error) - + IF(query_size.NE.str_size)THEN CALL check("h5tget_size_f", -1, total_error) ENDIF - + CALL h5tget_size_f(fixed_str2, query_size, error) CALL check("h5tget_size_f", error, total_error) IF(query_size.NE.str_size)THEN CALL check("h5tget_size_f", -1, total_error) ENDIF - + CALL h5tclose_f(fixed_str1,error) CALL check("h5tclose_f", error, total_error) - + CALL h5tclose_f(fixed_str2,error) CALL check("h5tclose_f", error, total_error) data_dims(1) = dimsize @@ -526,7 +526,7 @@ CONTAINS CALL h5dread_f(dset_id, dt3_id, double_member_out, data_dims, error) CALL check("h5dread_f", error, total_error) DO i = 1, dimsize - CALL VERIFY("h5dread_f:Wrong double precision data is read back", double_member_out(i), double_member(i), total_error) + CALL VERIFY("h5dread_f:Wrong double precision data is read back", double_member_out(i), double_member(i), total_error) ENDDO ! ! @@ -541,20 +541,20 @@ CONTAINS CALL h5dread_f(dset_id, dt4_id, real_member_out, data_dims, error) CALL check("h5dread_f", error, total_error) DO i = 1, dimsize - CALL VERIFY("h5dread_f:Wrong double precision data is read back", real_member_out(i), real_member(i), total_error) + CALL VERIFY("h5dread_f:Wrong double precision data is read back", real_member_out(i), real_member(i), total_error) ENDDO ! ! *----------------------------------------------------------------------- ! * Test encoding and decoding compound datatypes ! *----------------------------------------------------------------------- ! - ! Encode compound type in a buffer + ! Encode compound type in a buffer ! -- First find the buffer size CALL H5Tencode_f(dtype_id, cmpd_buf, cmpd_buf_size, error) CALL check("H5Tencode_f", error, total_error) - ! Try decoding bogus buffer + ! Try decoding bogus buffer CALL H5Tdecode_f(cmpd_buf, decoded_tid1, error) CALL verify("H5Tdecode_f", error, -1, total_error) @@ -562,11 +562,11 @@ CONTAINS CALL H5Tencode_f(dtype_id, cmpd_buf, cmpd_buf_size, error) CALL check("H5Tencode_f", error, total_error) - ! Decode from the compound buffer and return an object handle + ! Decode from the compound buffer and return an object handle CALL H5Tdecode_f(cmpd_buf, decoded_tid1, error) CALL check("H5Tdecode_f", error, total_error) - ! Verify that the datatype was copied exactly + ! Verify that the datatype was copied exactly CALL H5Tequal_f(decoded_tid1, dtype_id, flag, error) CALL check("H5Tequal_f", error, total_error) @@ -886,7 +886,7 @@ CONTAINS CALL H5Tget_native_type_f(dtype, H5T_DIR_ASCEND_F, native_type, error) CALL check("H5Tget_native_type_f",error, total_error) - ! Verify the datatype retrieved and converted + ! Verify the datatype retrieved and converted CALL H5Tget_order_f(native_type, order1, error) CALL check("H5Tget_order_f",error, total_error) CALL H5Tget_order_f(H5T_NATIVE_INTEGER, order2, error) @@ -957,7 +957,7 @@ CONTAINS ! * Modifications: ! * ! *------------------------------------------------------------------------- -! +! SUBROUTINE test_derived_flt(cleanup, total_error) @@ -977,7 +977,7 @@ SUBROUTINE test_derived_flt(cleanup, total_error) INTEGER :: error - ! Create File + ! Create File CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) IF (error .NE. 0) THEN WRITE(*,*) "Cannot modify filename" diff --git a/fortran/test/tH5T_F03.F90 b/fortran/test/tH5T_F03.F90 index 800e84b..d047263 100644 --- a/fortran/test/tH5T_F03.F90 +++ b/fortran/test/tH5T_F03.F90 @@ -5,7 +5,7 @@ ! ! FUNCTION ! Test FORTRAN HDF5 H5T APIs which are dependent on FORTRAN 2003 -! features. +! features. ! ! COPYRIGHT ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -43,7 +43,7 @@ MODULE TH5T_F03 - USE HDF5 + USE HDF5 USE TH5_MISC USE TH5_MISC_GEN USE ISO_C_BINDING @@ -55,10 +55,10 @@ SUBROUTINE test_array_compound_atomic(total_error) IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error - ! 1-D dataset WITH fixed dimensions + ! 1-D dataset WITH fixed dimensions INTEGER, PARAMETER :: SPACE1_RANK = 1 INTEGER, PARAMETER :: SPACE1_DIM1 = 4 - ! 1-D array datatype + ! 1-D array datatype INTEGER, PARAMETER :: ARRAY1_RANK= 1 INTEGER, PARAMETER :: ARRAY1_DIM1= 4 CHARACTER(LEN=10), PARAMETER :: FILENAME = "tarray1.h5" @@ -68,26 +68,26 @@ SUBROUTINE test_array_compound_atomic(total_error) INTEGER :: i REAL :: f END TYPE s1_t - TYPE(s1_t), DIMENSION(:,:), ALLOCATABLE, TARGET :: wdata ! Information to write - TYPE(s1_t), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Information read in - INTEGER(hid_t) :: fid1 ! HDF5 File IDs - INTEGER(hid_t) :: dataset ! Dataset ID - INTEGER(hid_t) :: sid1 ! Dataspace ID - INTEGER(hid_t) :: tid1 ! Array Datatype ID - INTEGER(hid_t) :: tid2 ! Compound Datatype ID + TYPE(s1_t), DIMENSION(:,:), ALLOCATABLE, TARGET :: wdata ! Information to write + TYPE(s1_t), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Information read in + INTEGER(hid_t) :: fid1 ! HDF5 File IDs + INTEGER(hid_t) :: dataset ! Dataset ID + INTEGER(hid_t) :: sid1 ! Dataspace ID + INTEGER(hid_t) :: tid1 ! Array Datatype ID + INTEGER(hid_t) :: tid2 ! Compound Datatype ID INTEGER(HSIZE_T), DIMENSION(1) :: sdims1 = (/SPACE1_DIM1/) INTEGER(HSIZE_T), DIMENSION(1) :: tdims1=(/ARRAY1_DIM1/) - INTEGER :: ndims ! Array rank for reading - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims ! Array dimensions for reading - INTEGER :: nmemb ! Number of compound members - CHARACTER(LEN=20) :: mname ! Name of compound field - INTEGER(size_t) :: off ! Offset of compound field - INTEGER(hid_t) :: mtid ! Datatype ID for field - INTEGER :: i,j ! counting variables - - INTEGER :: error ! Generic RETURN value + INTEGER :: ndims ! Array rank for reading + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims ! Array dimensions for reading + INTEGER :: nmemb ! Number of compound members + CHARACTER(LEN=20) :: mname ! Name of compound field + INTEGER(size_t) :: off ! Offset of compound field + INTEGER(hid_t) :: mtid ! Datatype ID for field + INTEGER :: i,j ! counting variables + + INTEGER :: error ! Generic RETURN value INTEGER :: namelen LOGICAL :: flag @@ -96,7 +96,7 @@ SUBROUTINE test_array_compound_atomic(total_error) ALLOCATE( wdata(1:SPACE1_DIM1,1:ARRAY1_DIM1) ) ALLOCATE( rdata(1:SPACE1_DIM1,1:ARRAY1_DIM1) ) - ! Initialize array data to write + ! Initialize array data to write DO i = 1, SPACE1_DIM1 DO j = 1, ARRAY1_DIM1 wdata(i,j)%i = i * 10 + j @@ -104,153 +104,153 @@ SUBROUTINE test_array_compound_atomic(total_error) ENDDO ENDDO - ! Create file + ! Create file CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid1,error) CALL check("h5fcreate_f", error, total_error) - ! Create dataspace for datasets + ! Create dataspace for datasets CALL h5screate_simple_f(SPACE1_RANK, sdims1, sid1, error) CALL check("h5screate_simple_f", error, total_error) CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(wdata(1,1)), C_LOC(wdata(2,1))), tid2, error) CALL check("h5tcreate_f", error, total_error) - ! Insert integer field + ! Insert integer field CALL h5tinsert_f(tid2, "i", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%i)), H5T_NATIVE_INTEGER, error) CALL check("h5tinsert_f", error, total_error) - ! Insert float field + ! Insert float field CALL h5tinsert_f(tid2, "f", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f)), H5T_NATIVE_REAL, error) CALL check("h5tinsert_f", error, total_error) - ! Create an array datatype to refer to + ! Create an array datatype to refer to CALL h5tarray_create_f(tid2, ARRAY1_RANK, tdims1, tid1, error) CALL check("h5tarray_create_f", error, total_error) - ! Close compound datatype + ! Close compound datatype CALL h5tclose_f(tid2,error) CALL check("h5tclose_f", error, total_error) - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(fid1,"Dataset1",tid1, sid1, dataset,error) CALL check("h5dcreate_f", error, total_error) - ! Write dataset to disk + ! Write dataset to disk ALLOCATE(rdims(1:2)) ! dummy not needed f_ptr = C_LOC(wdata(1,1)) CALL h5dwrite_f(dataset, tid1, f_ptr, error ) CALL check("h5dwrite_f", error, total_error) - ! Close Dataset + ! Close Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f", error, total_error) - ! Close datatype + ! Close datatype CALL h5tclose_f(tid1,error) CALL check("h5tclose_f", error, total_error) - ! Close disk dataspace + ! Close disk dataspace CALL h5sclose_f(sid1,error) CALL check("h5sclose_f", error, total_error) - ! Close file + ! Close file CALL h5fclose_f(fid1,error) CALL check("h5fclose_f", error, total_error) - ! Re-open file + ! Re-open file CALL h5fopen_f (FILENAME, H5F_ACC_RDONLY_F, fid1, error) CALL check("h5fopen_f", error, total_error) - ! Open the dataset + ! Open the dataset CALL h5dopen_f(fid1, "Dataset1", dataset, error) CALL check("h5dopen_f", error, total_error) - ! Get the datatype + ! Get the datatype CALL h5dget_type_f(dataset, tid1, error) CALL check("h5dget_type_f", error, total_error) - ! Check the array rank + ! Check the array rank CALL h5tget_array_ndims_f(tid1, ndims, error) CALL check("h5tget_array_ndims_f", error, total_error) CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) - ! Get the array dimensions + ! Get the array dimensions ALLOCATE(rdims1(1:ndims)) CALL h5tget_array_dims_f(tid1, rdims1, error) CALL check("h5tget_array_dims_f", error, total_error) - ! Check the array dimensions + ! Check the array dimensions DO i = 1, ndims CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims1(i)), total_error) ENDDO - ! Get the compound datatype + ! Get the compound datatype CALL h5tget_super_f(tid1, tid2, error) CALL check("h5tget_super_f", error, total_error) - ! Check the number of members + ! Check the number of members CALL h5tget_nmembers_f(tid2, nmemb, error) CALL check("h5tget_nmembers_f", error, total_error) CALL VERIFY("h5tget_nmembers_f", nmemb, 2, total_error) - ! Check the 1st field's name + ! Check the 1st field's name CALL H5Tget_member_name_f(tid2, 0, mname, namelen,error) CALL check("H5Tget_member_name_f", error, total_error) CALL verify("H5Tget_member_name_f",mname(1:namelen),"i", total_error) - ! Check the 1st field's offset + ! Check the 1st field's offset CALL H5Tget_member_offset_f(tid2, 0, off, error) CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),0, total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),0, total_error) - ! Check the 1st field's datatype + ! Check the 1st field's datatype CALL H5Tget_member_type_f(tid2, 0, mtid, error) CALL check("H5Tget_member_type_f", error, total_error) CALL H5Tequal_f(mtid, H5T_NATIVE_INTEGER, flag, error) - CALL check("H5Tequal_f", error, total_error) + CALL check("H5Tequal_f", error, total_error) CALL verify("H5Tequal_f", flag, .TRUE., total_error) CALL h5tclose_f(mtid,error) CALL check("h5tclose_f", error, total_error) - ! Check the 2nd field's name + ! Check the 2nd field's name CALL H5Tget_member_name_f(tid2, 1, mname, namelen,error) CALL check("H5Tget_member_name_f", error, total_error) CALL verify("H5Tget_member_name_f",mname(1:namelen),"f", total_error) - ! Check the 2nd field's offset + ! Check the 2nd field's offset CALL H5Tget_member_offset_f(tid2, 1, off, error) CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f))), total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f))), total_error) - ! Check the 2nd field's datatype + ! Check the 2nd field's datatype CALL H5Tget_member_type_f(tid2, 1, mtid, error) CALL check("H5Tget_member_type_f", error, total_error) CALL H5Tequal_f(mtid, H5T_NATIVE_REAL, flag, error) - CALL check("H5Tequal_f", error, total_error) + CALL check("H5Tequal_f", error, total_error) CALL verify("H5Tequal_f", flag, .TRUE., total_error) CALL h5tclose_f(mtid,error) CALL check("h5tclose_f", error, total_error) - ! Close Compound Datatype + ! Close Compound Datatype CALL h5tclose_f(tid2, error) CALL check("h5tclose_f", error, total_error) - ! Read dataset from disk + ! Read dataset from disk f_ptr = C_LOC(rdata(1,1)) CALL H5Dread_f(dataset, tid1, f_ptr, error, H5S_ALL_F, H5S_ALL_F, H5P_DEFAULT_F) CALL check("H5Dread_f", error, total_error) - ! Compare data read in + ! Compare data read in DO i = 1, SPACE1_DIM1 DO j = 1, ARRAY1_DIM1 IF(wdata(i,j)%i.NE.rdata(i,j)%i)THEN @@ -261,15 +261,15 @@ SUBROUTINE test_array_compound_atomic(total_error) ENDDO ENDDO - ! Close Datatype + ! Close Datatype CALL h5tclose_f(tid1,error) CALL check("h5tclose_f", error, total_error) - ! Close Dataset + ! Close Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f", error, total_error) - ! Close file + ! Close file CALL h5fclose_f(fid1,error) CALL check("h5fclose_f", error, total_error) @@ -283,12 +283,12 @@ END SUBROUTINE test_array_compound_atomic !!$!*************************************************************** !!$ SUBROUTINE test_array_compound_array(total_error) - + IMPLICIT NONE - + INTEGER, INTENT(INOUT) :: total_error - ! 1-D array datatype + ! 1-D array datatype INTEGER, PARAMETER :: ARRAY1_RANK= 1 INTEGER, PARAMETER :: ARRAY1_DIM1= 3 INTEGER, PARAMETER :: ARRAY2_DIM1= 5 @@ -303,47 +303,47 @@ END SUBROUTINE test_array_compound_atomic REAL, DIMENSION(1:ARRAY2_DIM1) :: f CHARACTER(LEN=2), DIMENSION(1:ARRAY2_DIM1) :: c END TYPE st_t_struct - ! Information to write + ! Information to write TYPE(st_t_struct), DIMENSION(1:SPACE1_DIM1,1:ARRAY1_DIM1), TARGET :: wdata - ! Information read in + ! Information read in TYPE(st_t_struct), DIMENSION(1:SPACE1_DIM1,1:ARRAY1_DIM1), TARGET :: rdata - INTEGER(hid_t) :: fid1 ! HDF5 File IDs - INTEGER(hid_t) :: dataset ! Dataset ID - integer(hid_t) :: sid1 ! Dataspace ID - integer(hid_t) :: tid1 ! Array Datatype ID - integer(hid_t) :: tid2 ! Compound Datatype ID - integer(hid_t) :: tid3 ! Nested Array Datatype ID - integer(hid_t) :: tid4 ! Nested Array Datatype ID + INTEGER(hid_t) :: fid1 ! HDF5 File IDs + INTEGER(hid_t) :: dataset ! Dataset ID + integer(hid_t) :: sid1 ! Dataspace ID + integer(hid_t) :: tid1 ! Array Datatype ID + integer(hid_t) :: tid2 ! Compound Datatype ID + integer(hid_t) :: tid3 ! Nested Array Datatype ID + integer(hid_t) :: tid4 ! Nested Array Datatype ID INTEGER(HSIZE_T), DIMENSION(1) :: sdims1 = (/SPACE1_DIM1/) INTEGER(HSIZE_T), DIMENSION(1) :: tdims1=(/ARRAY1_DIM1/) INTEGER(HSIZE_T), DIMENSION(1) :: tdims2=(/ARRAY2_DIM1/) - INTEGER ndims ! Array rank for reading + INTEGER ndims ! Array rank for reading - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading - INTEGER :: nmemb ! Number of compound members - CHARACTER(LEN=20) :: mname ! Name of compound field - INTEGER(size_t) :: off ! Offset of compound field - INTEGER(hid_t) :: mtid ! Datatype ID for field - INTEGER(hid_t) :: mtid2 ! Datatype ID for field + INTEGER :: nmemb ! Number of compound members + CHARACTER(LEN=20) :: mname ! Name of compound field + INTEGER(size_t) :: off ! Offset of compound field + INTEGER(hid_t) :: mtid ! Datatype ID for field + INTEGER(hid_t) :: mtid2 ! Datatype ID for field - INTEGER :: mclass ! Datatype class for field - INTEGER :: i,j,k ! counting variables + INTEGER :: mclass ! Datatype class for field + INTEGER :: i,j,k ! counting variables INTEGER :: error CHARACTER(LEN=2) :: ichr2 INTEGER :: namelen - LOGICAL :: flag + LOGICAL :: flag INTEGER(HID_T) :: atype_id !String Attribute Datatype identifier - INTEGER(SIZE_T) :: attrlen ! Length of the attribute string + INTEGER(SIZE_T) :: attrlen ! Length of the attribute string TYPE(c_ptr) :: f_ptr - ! Initialize array data to write + ! Initialize array data to write DO i = 1, SPACE1_DIM1 DO j = 1, array1_DIM1 wdata(i,j)%i = i*10+j @@ -355,28 +355,28 @@ END SUBROUTINE test_array_compound_atomic ENDDO ENDDO - ! Create file + ! Create file CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid1,error) - CALL check("h5fcreate_f", error, total_error) + CALL check("h5fcreate_f", error, total_error) - ! Create dataspace for datasets + ! Create dataspace for datasets CALL h5screate_simple_f(SPACE1_RANK, sdims1, sid1, error) CALL check("h5screate_simple_f", error, total_error) - ! Create a compound datatype to refer to + ! Create a compound datatype to refer to ! CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(wdata(1,1)), C_LOC(wdata(2,1))), tid2, error) CALL check("h5tcreate_f", error, total_error) - ! Insert integer field + ! Insert integer field CALL h5tinsert_f(tid2, "i", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%i)), H5T_NATIVE_INTEGER, error) CALL check("h5tinsert_f", error, total_error) - ! Create an array of floats datatype + ! Create an array of floats datatype CALL h5tarray_create_f(H5T_NATIVE_REAL, ARRAY1_RANK, tdims2, tid3, error) CALL check("h5tarray_create_f", error, total_error) - ! Insert float array field + ! Insert float array field CALL h5tinsert_f(tid2, "f", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f)), tid3, error) CALL check("h5tinsert_f", error, total_error) @@ -386,227 +386,227 @@ END SUBROUTINE test_array_compound_atomic ! CALL h5tcopy_f(H5T_NATIVE_CHARACTER, atype_id, error) CALL check("h5tcopy_f",error,total_error) - - attrlen = LEN(wdata(1,1)%c(1)) + + attrlen = LEN(wdata(1,1)%c(1)) CALL h5tset_size_f(atype_id, attrlen, error) - CALL check("h5tset_size_f",error,total_error) + CALL check("h5tset_size_f",error,total_error) - ! Create an array of character datatype + ! Create an array of character datatype CALL h5tarray_create_f(atype_id, ARRAY1_RANK, tdims2, tid4, error) CALL check("h5tarray_create_f", error, total_error) - ! Insert character array field + ! Insert character array field CALL h5tinsert_f(tid2, "c", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%c(1)(1:1))), tid4, error) CALL check("h5tinsert2_f", error, total_error) - ! Close array of floats field datatype + ! Close array of floats field datatype CALL h5tclose_f(tid3,error) CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(tid4,error) CALL check("h5tclose_f", error, total_error) - ! Create an array datatype to refer to + ! Create an array datatype to refer to CALL h5tarray_create_f(tid2, ARRAY1_RANK, tdims1, tid1, error) CALL check("h5tarray_create_f", error, total_error) - ! Close compound datatype + ! Close compound datatype CALL h5tclose_f(tid2,error) CALL check("h5tclose_f", error, total_error) - ! Create a dataset + ! Create a dataset CALL h5dcreate_f(fid1,"Dataset1",tid1, sid1, dataset,error) CALL check("h5dcreate_f", error, total_error) - ! Write dataset to disk + ! Write dataset to disk f_ptr = C_LOC(wdata(1,1)) CALL h5dwrite_f(dataset, tid1, f_ptr, error ) CALL check("h5dwrite_f", error, total_error) - ! Close Dataset + ! Close Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f", error, total_error) - ! Close datatype + ! Close datatype CALL h5tclose_f(tid1,error) CALL check("h5tclose_f", error, total_error) - ! Close disk dataspace + ! Close disk dataspace CALL h5sclose_f(sid1,error) CALL check("h5sclose_f", error, total_error) - ! Close file + ! Close file CALL h5fclose_f(fid1,error) CALL check("h5fclose_f", error, total_error) - ! Re-open file + ! Re-open file CALL h5fopen_f (FILENAME, H5F_ACC_RDONLY_F, fid1, error) CALL check("h5fopen_f", error, total_error) - ! Open the dataset + ! Open the dataset CALL h5dopen_f(fid1, "Dataset1", dataset, error) CALL check("h5dopen_f", error, total_error) - - ! Get the datatype + + ! Get the datatype CALL h5dget_type_f(dataset, tid1, error) CALL check("h5dget_type_f", error, total_error) - ! Check the array rank + ! Check the array rank CALL h5tget_array_ndims_f(tid1, ndims, error) CALL check("h5tget_array_ndims_f", error, total_error) CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) - ! Get the array dimensions + ! Get the array dimensions ALLOCATE(rdims1(1:ndims)) CALL h5tget_array_dims_f(tid1, rdims1, error) CALL check("h5tget_array_dims_f", error, total_error) - ! Check the array dimensions + ! Check the array dimensions DO i = 1, ndims CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims1(i)), total_error) ENDDO - ! Get the compound datatype + ! Get the compound datatype CALL h5tget_super_f(tid1, tid2, error) CALL check("h5tget_super_f", error, total_error) - ! Check the number of members + ! Check the number of members CALL h5tget_nmembers_f(tid2, nmemb, error) CALL check("h5tget_nmembers_f", error, total_error) CALL VERIFY("h5tget_nmembers_f", nmemb, 3, total_error) - ! Check the 1st field's name + ! Check the 1st field's name CALL H5Tget_member_name_f(tid2, 0, mname, namelen,error) CALL check("H5Tget_member_name_f", error, total_error) CALL verify("H5Tget_member_name_f",mname(1:namelen),"i", total_error) - ! Check the 1st field's offset + ! Check the 1st field's offset CALL H5Tget_member_offset_f(tid2, 0, off, error) CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),0, total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),0, total_error) - ! Check the 1st field's datatype + ! Check the 1st field's datatype CALL H5Tget_member_type_f(tid2, 0, mtid, error) CALL check("H5Tget_member_type_f", error, total_error) CALL H5Tequal_f(mtid, H5T_NATIVE_INTEGER, flag, error) - CALL check("H5Tequal_f", error, total_error) + CALL check("H5Tequal_f", error, total_error) CALL verify("H5Tequal_f", flag, .TRUE., total_error) CALL h5tclose_f(mtid,error) CALL check("h5tclose_f", error, total_error) - ! Check the 2nd field's name + ! Check the 2nd field's name CALL H5Tget_member_name_f(tid2, 1, mname, namelen,error) CALL check("H5Tget_member_name_f", error, total_error) CALL verify("H5Tget_member_name_f",mname(1:namelen),"f", total_error) - ! Check the 2nd field's offset + ! Check the 2nd field's offset CALL H5Tget_member_offset_f(tid2, 1, off, error) CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f))), total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f))), total_error) - ! Check the 2nd field's datatype + ! Check the 2nd field's datatype CALL H5Tget_member_type_f(tid2, 1, mtid, error) CALL check("H5Tget_member_type_f", error, total_error) - ! Get the 2nd field's class + ! Get the 2nd field's class CALL H5Tget_class_f(mtid, mclass, error) CALL check("H5Tget_class_f", error, total_error) CALL VERIFY("H5Tget_class_f",mclass, H5T_ARRAY_F, total_error) - ! Check the array rank + ! Check the array rank CALL h5tget_array_ndims_f(mtid, ndims, error) CALL check("h5tget_array_ndims_f", error, total_error) CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) - ! Get the array dimensions + ! Get the array dimensions CALL h5tget_array_dims_f(mtid, rdims1, error) CALL check("h5tget_array_dims_f", error, total_error) - ! Check the array dimensions + ! Check the array dimensions DO i = 1, ndims CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims2(i)), total_error) ENDDO - ! Check the 3rd field's name + ! Check the 3rd field's name CALL H5Tget_member_name_f(tid2, 2, mname, namelen,error) CALL check("H5Tget_member_name_f", error, total_error) CALL verify("H5Tget_member_name_f",mname(1:namelen),"c", total_error) - ! Check the 3rd field's offset + ! Check the 3rd field's offset CALL H5Tget_member_offset_f(tid2, 2, off, error) CALL check("H5Tget_member_offset_f", error, total_error) CALL VERIFY("H5Tget_member_offset_f",INT(off),& - INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%c(1)(1:1)))), total_error) + INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%c(1)(1:1)))), total_error) - ! Check the 3rd field's datatype + ! Check the 3rd field's datatype CALL H5Tget_member_type_f(tid2, 2, mtid2, error) CALL check("H5Tget_member_type_f", error, total_error) - ! Get the 3rd field's class + ! Get the 3rd field's class CALL H5Tget_class_f(mtid2, mclass, error) CALL check("H5Tget_class_f", error, total_error) CALL VERIFY("H5Tget_class_f",mclass, H5T_ARRAY_F, total_error) - ! Check the array rank + ! Check the array rank CALL h5tget_array_ndims_f(mtid2, ndims, error) CALL check("h5tget_array_ndims_f", error, total_error) CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) - ! Get the array dimensions + ! Get the array dimensions CALL h5tget_array_dims_f(mtid2, rdims1, error) CALL check("h5tget_array_dims_f", error, total_error) - ! Check the array dimensions + ! Check the array dimensions DO i = 1, ndims CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims2(i)), total_error) ENDDO - ! Check the nested array's datatype + ! Check the nested array's datatype CALL H5Tget_super_f(mtid, tid3, error) CALL check("H5Tget_super_f", error, total_error) CALL H5Tequal_f(tid3, H5T_NATIVE_REAL, flag, error) - CALL check("H5Tequal_f", error, total_error) + CALL check("H5Tequal_f", error, total_error) CALL verify("H5Tequal_f", flag, .TRUE., total_error) - ! Check the nested array's datatype + ! Check the nested array's datatype CALL H5Tget_super_f(mtid2, tid3, error) CALL check("H5Tget_super_f", error, total_error) CALL H5Tequal_f(tid3, atype_id, flag, error) - CALL check("H5Tequal_f", error, total_error) + CALL check("H5Tequal_f", error, total_error) CALL verify("H5Tequal_f", flag, .TRUE., total_error) - ! Close the array's base type datatype + ! Close the array's base type datatype CALL h5tclose_f(tid3, error) CALL check("h5tclose_f", error, total_error) - ! Close the member datatype + ! Close the member datatype CALL h5tclose_f(mtid,error) CALL check("h5tclose_f", error, total_error) - ! Close the member datatype + ! Close the member datatype CALL h5tclose_f(mtid2,error) CALL check("h5tclose_f", error, total_error) - ! Close Compound Datatype + ! Close Compound Datatype CALL h5tclose_f(tid2,error) CALL check("h5tclose_f", error, total_error) - ! READ dataset from disk - + ! READ dataset from disk + f_ptr = c_null_ptr f_ptr = C_LOC(rdata(1,1)) CALL H5Dread_f(dataset, tid1, f_ptr, error) CALL check("H5Dread_f", error, total_error) - ! Compare data read in + ! Compare data read in DO i = 1, SPACE1_DIM1 DO j = 1, ARRAY1_DIM1 IF(wdata(i,j)%i.NE.rdata(i,j)%i)THEN @@ -616,21 +616,21 @@ END SUBROUTINE test_array_compound_atomic DO k = 1, ARRAY2_DIM1 CALL VERIFY("h5dread_f",wdata(i,j)%f(k),rdata(i,j)%f(k),total_error) IF(total_error.NE.0) PRINT*,'ERROR: Wrong real array data is read back by H5Dread_f' - CALL VERIFY("h5dread_f",wdata(i,j)%c(k),rdata(i,j)%c(k),total_error) + CALL VERIFY("h5dread_f",wdata(i,j)%c(k),rdata(i,j)%c(k),total_error) IF(total_error.NE.0) PRINT*,'ERROR: Wrong character array data is read back by H5Dread_f' ENDDO ENDDO ENDDO - ! Close Datatype + ! Close Datatype CALL h5tclose_f(tid1,error) CALL check("h5tclose_f", error, total_error) - ! Close Dataset + ! Close Dataset CALL h5dclose_f(dataset, error) CALL check("h5dclose_f", error, total_error) - ! Close file + ! Close file CALL h5fclose_f(fid1,error) CALL check("h5fclose_f", error, total_error) END SUBROUTINE test_array_compound_array @@ -644,7 +644,7 @@ END SUBROUTINE test_array_compound_atomic !!$!*************************************************************** !!$ SUBROUTINE test_array_bkg(total_error) - + IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -674,7 +674,7 @@ END SUBROUTINE test_array_compound_atomic TYPE(CmpField_struct), DIMENSION(1:LENGTH), TARGET :: cf TYPE(CmpField_struct), DIMENSION(1:LENGTH), TARGET :: cfr - + TYPE CmpDTSinfo_struct INTEGER :: nsubfields CHARACTER(LEN=5), DIMENSION(1:nmax) :: name @@ -687,9 +687,9 @@ END SUBROUTINE test_array_compound_atomic TYPE fld_t_struct REAL(KIND=sp), DIMENSION(1:ALEN) :: b END TYPE fld_t_struct - - INTEGER(SIZE_T) :: type_sizei ! Size of the integer datatype - INTEGER(SIZE_T) :: type_sizer ! Size of the real datatype + + INTEGER(SIZE_T) :: type_sizei ! Size of the integer datatype + INTEGER(SIZE_T) :: type_sizer ! Size of the real datatype INTEGER(SIZE_T) :: type_sized ! Size of the double datatype INTEGER(SIZE_T) :: sizeof_compound ! total size of compound @@ -698,14 +698,14 @@ END SUBROUTINE test_array_compound_atomic CHARACTER(LEN=10), PARAMETER :: FILENAME = "tarray3.h5" - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims ! Array dimensions for reading + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims ! Array dimensions for reading INTEGER :: error TYPE(c_ptr) :: f_ptr - -! Initialize the data -! ------------------- + +! Initialize the data +! ------------------- DO i = 1, LENGTH DO j = 1, ALEN @@ -715,13 +715,13 @@ END SUBROUTINE test_array_compound_atomic ENDDO ENDDO - ! Set the number of data members - ! ------------------------------ + ! Set the number of data members + ! ------------------------------ dtsinfo%nsubfields = 3 - ! Initialize the offsets - ! ----------------------- + ! Initialize the offsets + ! ----------------------- CALL h5tget_size_f(H5T_NATIVE_INTEGER, type_sizei, error) CALL check("h5tget_size_f", error, total_error) IF(h5_sizeof(cf(1)%b(1)).EQ.4_size_t)THEN @@ -736,44 +736,44 @@ END SUBROUTINE test_array_compound_atomic CALL check("h5tget_size_f", error, total_error) dtsinfo%offset(1) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%a(1))) - dtsinfo%offset(2) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%b(1))) + dtsinfo%offset(2) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%b(1))) dtsinfo%offset(3) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%c(1))) - ! Initialize the data type IDs - ! ---------------------------- + ! Initialize the data type IDs + ! ---------------------------- dtsinfo%datatype(1) = H5T_NATIVE_INTEGER; dtsinfo%datatype(2) = H5T_NATIVE_REAL_C_FLOAT; dtsinfo%datatype(3) = H5T_NATIVE_REAL_C_DOUBLE; - ! Initialize the names of data members - ! ------------------------------------ - + ! Initialize the names of data members + ! ------------------------------------ + dtsinfo%name(1) = "One " dtsinfo%name(2) = "Two " dtsinfo%name(3) = "Three" - - ! Create file - ! ----------- + + ! Create file + ! ----------- CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid,error) - CALL check("h5fcreate_f", error, total_error) + CALL check("h5fcreate_f", error, total_error) - ! Create data space - ! ----------------- + ! Create data space + ! ----------------- CALL h5screate_simple_f(RANK, dim, space, error) CALL check("h5screate_simple_f", error, total_error) - ! Create the memory data type - ! --------------------------- + ! Create the memory data type + ! --------------------------- CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(cf(1)), C_LOC(cf(2))), type, error) CALL check("h5tcreate_f", error, total_error) - ! Add members to the compound data type - ! -------------------------------------- + ! Add members to the compound data type + ! -------------------------------------- DO i = 1, dtsinfo%nsubfields CALL h5tarray_create_f(dtsinfo%datatype(i), ndims(i), dima, array_dt, error) @@ -785,13 +785,13 @@ END SUBROUTINE test_array_compound_atomic CALL check("h5tclose_f", error, total_error) ENDDO - ! Create the dataset + ! Create the dataset ! ------------------ / CALL h5dcreate_f(fid,FIELDNAME,type, space, dataset,error) CALL check("h5dcreate_f", error, total_error) - ! Write data to the dataset - ! ------------------------- + ! Write data to the dataset + ! ------------------------- ALLOCATE(rdims(1:2)) ! dummy not needed @@ -806,8 +806,8 @@ END SUBROUTINE test_array_compound_atomic CALL H5Dread_f(dataset, type, f_ptr, error) CALL check("H5Dread_f", error, total_error) - ! Verify correct data - ! ------------------- + ! Verify correct data + ! ------------------- DO i = 1, LENGTH DO j = 1, ALEN IF( cf(i)%a(j) .NE. cfr(i)%a(j) )THEN @@ -820,8 +820,8 @@ END SUBROUTINE test_array_compound_atomic ENDDO - ! Release IDs - ! ----------- + ! Release IDs + ! ----------- CALL h5tclose_f(type,error) CALL check("h5tclose_f", error, total_error) CALL h5sclose_f(space,error) @@ -832,7 +832,7 @@ END SUBROUTINE test_array_compound_atomic CALL check("h5fclose_f", error, total_error) !**************************** - ! Reopen the file and update + ! Reopen the file and update !**************************** CALL h5fopen_f (FILENAME, H5F_ACC_RDWR_F, fid, error) @@ -852,8 +852,8 @@ END SUBROUTINE test_array_compound_atomic CALL h5tinsert_f(TYPE, "Two", 0_size_t, array_dt, error) CALL check("h5tinsert_f", error, total_error) - ! Initialize the data to overwrite - ! -------------------------------- + ! Initialize the data to overwrite + ! -------------------------------- DO i = 1, LENGTH DO j = 1, ALEN fld(i)%b(j) = 1.313 @@ -867,8 +867,8 @@ END SUBROUTINE test_array_compound_atomic CALL check("h5dwrite_f", error, total_error) - ! Read just the field changed - + ! Read just the field changed + f_ptr = C_LOC(fldr(1)) CALL H5Dread_f(dataset, TYPE, f_ptr, error) CALL check("H5Dread_f", error, total_error) @@ -887,15 +887,15 @@ END SUBROUTINE test_array_compound_atomic CALL check("h5dget_type_f", error, total_error) - ! Read the entire dataset again + ! Read the entire dataset again f_ptr = C_LOC(cfr(1)) CALL H5Dread_f(dataset, TYPE, f_ptr, error) CALL check("H5Dread_f", error, total_error) - ! Verify correct data - ! ------------------- + ! Verify correct data + ! ------------------- DO i = 1, LENGTH DO j = 1, ALEN @@ -915,7 +915,7 @@ END SUBROUTINE test_array_compound_atomic CALL check("h5fclose_f", error, total_error) !************************************************** -! Reopen the file and print out all the data again +! Reopen the file and print out all the data again !************************************************** CALL h5fopen_f (FILENAME, H5F_ACC_RDWR_F, fid, error) @@ -930,8 +930,8 @@ END SUBROUTINE test_array_compound_atomic CALL check("h5dget_type_f", error, total_error) - ! Reset the data to read in - ! ------------------------- + ! Reset the data to read in + ! ------------------------- DO i = 1, LENGTH cfr(i)%a(:) = 0 @@ -943,8 +943,8 @@ END SUBROUTINE test_array_compound_atomic CALL H5Dread_f(dataset, TYPE, f_ptr, error) CALL check("H5Dread_f", error, total_error) - ! Verify correct data - ! ------------------- + ! Verify correct data + ! ------------------- DO i = 1, LENGTH DO j = 1, ALEN @@ -968,22 +968,22 @@ END SUBROUTINE test_array_compound_atomic SUBROUTINE test_h5kind_to_type(total_error) IMPLICIT NONE - + INTEGER, INTENT(INOUT) :: total_error - + INTEGER, PARAMETER :: int_kind_1 = SELECTED_INT_KIND(2) !should map to INTEGER*1 on most modern processors INTEGER, PARAMETER :: int_kind_4 = SELECTED_INT_KIND(4) !should map to INTEGER*2 on most modern processors INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(9) !should map to INTEGER*4 on most modern processors INTEGER, PARAMETER :: int_kind_16 = SELECTED_INT_KIND(18) !should map to INTEGER*8 on most modern processors -#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 INTEGER, PARAMETER :: int_kind_32 = SELECTED_INT_KIND(36) !should map to INTEGER*16 on most modern processors - INTEGER(int_kind_32), DIMENSION(1:4), TARGET :: dset_data_i32, data_out_i32 - INTEGER(HID_T) :: dset_id32 ! Dataset identifier - CHARACTER(LEN=6), PARAMETER :: dsetname16 = "dset16" ! Dataset name + INTEGER(int_kind_32), DIMENSION(1:4), TARGET :: dset_data_i32, data_out_i32 + INTEGER(HID_T) :: dset_id32 ! Dataset identifier + CHARACTER(LEN=6), PARAMETER :: dsetname16 = "dset16" ! Dataset name #endif INTEGER, PARAMETER :: real_kind_7 = C_FLOAT !should map to REAL*4 on most modern processors INTEGER, PARAMETER :: real_kind_15 = C_DOUBLE !should map to REAL*8 on most modern processors - + ! Check if C has quad precision extension #if H5_HAVE_FLOAT128!=0 ! Check if Fortran supports quad precision @@ -1004,8 +1004,8 @@ END SUBROUTINE test_array_compound_atomic INTEGER, PARAMETER :: real_kind_31 = SELECTED_REAL_KIND(15,307) # endif #endif - REAL(real_kind_31), DIMENSION(1:4), TARGET :: dset_data_r31, data_out_r31 - INTEGER(HID_T) :: dset_idr16 ! Dataset identifier + REAL(real_kind_31), DIMENSION(1:4), TARGET :: dset_data_r31, data_out_r31 + INTEGER(HID_T) :: dset_idr16 ! Dataset identifier CHARACTER(LEN=7), PARAMETER :: dsetnamer16 = "dsetr16" ! Dataset name CHARACTER(LEN=12), PARAMETER :: filename = "dsetf_F03.h5" ! File name @@ -1016,19 +1016,19 @@ END SUBROUTINE test_array_compound_atomic CHARACTER(LEN=6), PARAMETER :: dsetnamer = "dsetr" ! Dataset name CHARACTER(LEN=6), PARAMETER :: dsetnamer4 = "dsetr4" ! Dataset name CHARACTER(LEN=6), PARAMETER :: dsetnamer8 = "dsetr8" ! Dataset name - - INTEGER(HID_T) :: file_id ! File identifier - INTEGER(HID_T) :: dset_id1 ! Dataset identifier - INTEGER(HID_T) :: dset_id4 ! Dataset identifier - INTEGER(HID_T) :: dset_id8 ! Dataset identifier - INTEGER(HID_T) :: dset_id16 ! Dataset identifier - INTEGER(HID_T) :: dset_idr ! Dataset identifier - INTEGER(HID_T) :: dset_idr4 ! Dataset identifier - INTEGER(HID_T) :: dset_idr8 ! Dataset identifier - + + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HID_T) :: dset_id1 ! Dataset identifier + INTEGER(HID_T) :: dset_id4 ! Dataset identifier + INTEGER(HID_T) :: dset_id8 ! Dataset identifier + INTEGER(HID_T) :: dset_id16 ! Dataset identifier + INTEGER(HID_T) :: dset_idr ! Dataset identifier + INTEGER(HID_T) :: dset_idr4 ! Dataset identifier + INTEGER(HID_T) :: dset_idr8 ! Dataset identifier + INTEGER :: error ! Error flag INTEGER :: i - + ! Data buffers: INTEGER(int_kind_1), DIMENSION(1:4), TARGET :: dset_data_i1, data_out_i1 @@ -1039,10 +1039,10 @@ END SUBROUTINE test_array_compound_atomic REAL, DIMENSION(1:4), TARGET :: dset_data_r, data_out_r REAL(real_kind_7), DIMENSION(1:4), TARGET :: dset_data_r7, data_out_r7 REAL(real_kind_15), DIMENSION(1:4), TARGET :: dset_data_r15, data_out_r15 - - INTEGER(HSIZE_T), DIMENSION(1:1) :: data_dims = (/4/) + + INTEGER(HSIZE_T), DIMENSION(1:1) :: data_dims = (/4/) INTEGER(HID_T) :: dspace_id ! Dataspace identifier - + TYPE(C_PTR) :: f_ptr ! @@ -1060,7 +1060,7 @@ END SUBROUTINE test_array_compound_atomic dset_data_r7(i) = 4.0_real_kind_7*ATAN(1.0_real_kind_7)-REAL(i-1,real_kind_7) dset_data_r15(i) = 4.0_real_kind_15*ATAN(1.0_real_kind_15)-REAL(i-1,real_kind_15) dset_data_r31(i) = 4.0_real_kind_31*ATAN(1.0_real_kind_31)-REAL(i-1,real_kind_31) - + END DO CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error) @@ -1142,7 +1142,7 @@ END SUBROUTINE test_array_compound_atomic ! ! Read the dataset. ! - ! Read data back into an integer size that is larger then the original size used for + ! Read data back into an integer size that is larger then the original size used for ! writing the data f_ptr = C_LOC(data_out_i1(1)) CALL h5dread_f(dset_id1, h5kind_to_type(int_kind_1,H5_INTEGER_KIND), f_ptr, error) @@ -1174,12 +1174,12 @@ END SUBROUTINE test_array_compound_atomic CALL h5dread_f(dset_idr16, h5kind_to_type(real_kind_31,H5_REAL_KIND), f_ptr, error) CALL check("h5dread_f",error, total_error) DO i = 1, 4 - + CALL verify("h5kind_to_type",dset_data_i1(i),data_out_i1(i),total_error) CALL verify("h5kind_to_type",dset_data_i4(i),data_out_i4(i),total_error) CALL verify("h5kind_to_type",dset_data_i8(i),data_out_i8(i),total_error) CALL verify("h5kind_to_type",dset_data_i16(i),data_out_i16(i),total_error) - + #if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 CALL verify("h5kind_to_type",dset_data_i32(i),data_out_i32(i),total_error) #endif @@ -1188,7 +1188,7 @@ END SUBROUTINE test_array_compound_atomic CALL verify("h5kind_to_type",dset_data_r15(i),data_out_r15(i),total_error) CALL verify("h5kind_to_type",dset_data_r31(i),data_out_r31(i),total_error) END DO - + ! ! Close the dataset. ! @@ -1224,7 +1224,7 @@ END SUBROUTINE test_h5kind_to_type SUBROUTINE t_array(total_error) IMPLICIT NONE - + INTEGER, INTENT(INOUT) :: total_error CHARACTER(LEN=19), PARAMETER :: filename = "t_array_F03.h5" @@ -1236,7 +1236,7 @@ SUBROUTINE t_array(total_error) INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) INTEGER(HSIZE_T), DIMENSION(1:2) :: adims = (/adim0, adim1/) INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - INTEGER, DIMENSION(1:dim0, 1:adim0, 1:adim1), TARGET :: wdata ! Write buffer + INTEGER, DIMENSION(1:dim0, 1:adim0, 1:adim1), TARGET :: wdata ! Write buffer INTEGER, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: rdata ! Read buffer INTEGER :: i, j, k TYPE(C_PTR) :: f_ptr @@ -1292,7 +1292,7 @@ SUBROUTINE t_array(total_error) CALL H5Fclose_f(file, error) CALL check("h5fclose_f",error, total_error) ! - ! Now we begin the read section of this example. + ! Now we begin the read section of this example. ! ! Open file, dataset, and attribute. ! @@ -1322,7 +1322,7 @@ SUBROUTINE t_array(total_error) ALLOCATE(rdata(1:dims(1),1:adims(1),1:adims(2))) ! ! Create the memory datatype. - ! + ! CALL H5Tarray_create_f(H5T_NATIVE_INTEGER, 2, adims, memtype, error) CALL check("H5Tarray_create_f",error, total_error) ! @@ -1397,7 +1397,7 @@ SUBROUTINE t_enum(total_error) F_BASET = H5T_STD_I16BE ! File base type M_BASET = H5T_NATIVE_INTEGER ! Memory base type DO i = 1, dim0 - DO j = 1, dim1 + DO j = 1, dim1 wdata(i,j) = MOD( (j-1)*(i-1), PLASMA+1) ENDDO ENDDO @@ -1413,7 +1413,7 @@ SUBROUTINE t_enum(total_error) ! CALL h5tenum_create_f(F_BASET, filetype, error) CALL check("h5tenum_create_f",error, total_error) - + CALL h5tenum_create_f(M_BASET, memtype, error) CALL check("h5tenum_create_f",error, total_error) @@ -1446,7 +1446,7 @@ SUBROUTINE t_enum(total_error) CALL check("h5screate_simple_f",error, total_error) ! ! Create the dataset and write the enumerated data to it. - ! + ! CALL h5dcreate_f(file, dataset, filetype, space, dset, error) CALL check("h5dcreate_f",error, total_error) f_ptr = C_LOC(wdata(1,1)) @@ -1521,7 +1521,7 @@ SUBROUTINE t_enum(total_error) CALL check("h5tclose_f",error, total_error) CALL h5fclose_f(file , error) CALL check("h5fclose_f",error, total_error) - + END SUBROUTINE t_enum SUBROUTINE t_bit(total_error) @@ -1538,7 +1538,7 @@ SUBROUTINE t_bit(total_error) INTEGER(HID_T) :: file, space, dset ! Handles INTEGER(HSIZE_T), DIMENSION(1:2) :: dims = (/dim0, dim1/) INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - INTEGER(C_SIGNED_CHAR), DIMENSION(1:dim0, 1:dim1), TARGET :: wdata ! Write buffer + INTEGER(C_SIGNED_CHAR), DIMENSION(1:dim0, 1:dim1), TARGET :: wdata ! Write buffer INTEGER(C_SIGNED_CHAR), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Read buffer INTEGER :: A, B, C, D INTEGER :: Aw, Bw, Cw, Dw @@ -1587,7 +1587,7 @@ SUBROUTINE t_bit(total_error) CALL H5Fclose_f(file, error) CALL check("h5fclose_f",error, total_error) ! - ! Now we begin the read section of this example. + ! Now we begin the read section of this example. ! ! Open file, dataset. ! @@ -1620,8 +1620,8 @@ SUBROUTINE t_bit(total_error) B = IAND(ISHFT(rdata(i,j),-2), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "B" C = IAND(ISHFT(rdata(i,j),-4), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "C" D = IAND(ISHFT(rdata(i,j),-6), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "D" - - Aw = IAND(wdata(i,j), INT(hex,C_SIGNED_CHAR)) + + Aw = IAND(wdata(i,j), INT(hex,C_SIGNED_CHAR)) Bw = IAND(ISHFT(wdata(i,j),-2), INT(hex,C_SIGNED_CHAR)) Cw = IAND(ISHFT(wdata(i,j),-4), INT(hex,C_SIGNED_CHAR)) Dw = IAND(ISHFT(wdata(i,j),-6), INT(hex,C_SIGNED_CHAR)) @@ -1662,8 +1662,8 @@ SUBROUTINE t_opaque(total_error) CHARACTER(LEN=size), DIMENSION(1:dim0), TARGET :: wdata ! Write buffer CHARACTER(LEN=size), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer CHARACTER(LEN=size-1) :: str = "OPAQUE" - - CHARACTER(LEN=14) :: tag_sm ! Test reading obaque tag into + + CHARACTER(LEN=14) :: tag_sm ! Test reading obaque tag into CHARACTER(LEN=15) :: tag_exact ! buffers that are: to small, exact CHARACTER(LEN=17) :: tag_big ! and to big. @@ -1677,7 +1677,7 @@ SUBROUTINE t_opaque(total_error) ! Initialize data. ! DO i = 1, dim0 - WRITE(ichr,'(I1)') i-1 + WRITE(ichr,'(I1)') i-1 wdata(i) = str//ichr ENDDO ! @@ -1735,15 +1735,15 @@ SUBROUTINE t_opaque(total_error) CALL h5tget_size_f(dtype, len, error) CALL check("h5tget_size_f",error, total_error) - ! Next tests should return + ! Next tests should return ! opaque_tag = tag = "Character array" and the actual length = 15 - + ! Test reading into a string that is to small CALL h5tget_tag_f(dtype, tag_sm, taglen, error) CALL check("h5tget_tag_f",error, total_error) CALL VERIFY("h5tget_tag_f", taglen, 15, total_error) CALL verify("h5tget_tag_f",tag_sm,"Character arra", total_error) - + ! Test reading into a string that is exact CALL h5tget_tag_f(dtype, tag_exact, taglen, error) CALL check("h5tget_tag_f",error, total_error) @@ -1755,7 +1755,7 @@ SUBROUTINE t_opaque(total_error) CALL check("h5tget_tag_f",error, total_error) CALL VERIFY("h5tget_tag_f", taglen, 15, total_error) CALL verify("h5tget_tag_f",tag_big,"Character array ", total_error) - + ! ! Get dataspace and allocate memory for read buffer. ! @@ -1787,7 +1787,7 @@ SUBROUTINE t_opaque(total_error) CALL check("h5tclose_f",error, total_error) CALL H5Fclose_f(file, error) CALL check("h5fclose_f",error, total_error) - + END SUBROUTINE t_opaque SUBROUTINE t_objref(total_error) @@ -1855,7 +1855,7 @@ SUBROUTINE t_objref(total_error) ! CALL h5dcreate_f(file, dataset, H5T_STD_REF_OBJ, space, dset, error) CALL check("h5dcreate_f",error, total_error) - + f_ptr = C_LOC(wdata(1)) CALL h5dwrite_f(dset, H5T_STD_REF_OBJ, f_ptr, error) CALL check("h5dwrite_f",error, total_error) @@ -1955,11 +1955,11 @@ SUBROUTINE t_regref(total_error) INTEGER :: error INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) - INTEGER(HSIZE_T), DIMENSION(1:1) :: dims3 + INTEGER(HSIZE_T), DIMENSION(1:1) :: dims3 INTEGER(HSIZE_T), DIMENSION(1:2) :: dims2 = (/ds2dim0,ds2dim1/) INTEGER(HSIZE_T), DIMENSION(1:2,1:4) :: coords = RESHAPE((/2,1,12,3,1,2,5,3/),(/2,4/)) - + INTEGER(HSIZE_T), DIMENSION(1:2) :: start=(/0,0/),stride=(/11,2/),count=(/2,2/), BLOCK=(/3,1/) INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims @@ -2077,7 +2077,7 @@ SUBROUTINE t_regref(total_error) ! Output the data to the screen. ! DO i = 1, dims(1) - + ! ! Open the referenced object, retrieve its region as a ! dataspace selection. @@ -2085,10 +2085,10 @@ SUBROUTINE t_regref(total_error) f_ptr = C_LOC(rdata(i)) CALL H5Rdereference_f(dset, H5R_DATASET_REGION_F, f_ptr, dset2, error) CALL check("H5Rdereference_f",error, total_error) - + CALL H5Rget_region_f(dset, f_ptr, space, error) CALL check("H5Rget_region_f",error, total_error) - + ! ! Get the object's name ! @@ -2103,7 +2103,7 @@ SUBROUTINE t_regref(total_error) CALL H5Sget_select_npoints_f(space, npoints, error) CALL check("H5Sget_select_npoints_f",error, total_error) CALL VERIFY("H5Sget_select_npoints_f", INT(npoints), LEN_TRIM(chrref_correct(i)), total_error) - + dims3(1) = npoints ! ! Read the dataset region. @@ -2162,9 +2162,9 @@ SUBROUTINE t_vlen(total_error) TYPE(hvl_t), DIMENSION(1:2), TARGET :: rdata ! Pointer to vlen structures INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/2/) - INTEGER, DIMENSION(:), POINTER :: ptr_r + INTEGER, DIMENSION(:), POINTER :: ptr_r TYPE(C_PTR) :: f_ptr - + ! ! Initialize variable-length data. wdata(1) is a countdown of ! length LEN0, wdata(2) is a Fibonacci sequence of length LEN1. @@ -2209,7 +2209,7 @@ SUBROUTINE t_vlen(total_error) ! CALL H5Dcreate_f(file, dataset, filetype, space, dset, error) CALL check("h5dcreate_f",error, total_error) - + f_ptr = C_LOC(wdata(1)) CALL h5dwrite_f(dset, memtype, f_ptr, error) CALL check("h5dwrite_f",error, total_error) @@ -2249,14 +2249,14 @@ SUBROUTINE t_vlen(total_error) CALL H5Dget_space_f(dset, space, error) CALL check("H5Dget_space_f",error, total_error) dim0 = dims(1) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) CALL check("H5Sget_simple_extent_dims_f",error, total_error) CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), INT(dim0), total_error) ! ! Create the memory datatype. ! - CALL H5Tvlen_create_f(H5T_NATIVE_INTEGER, memtype, error) + CALL H5Tvlen_create_f(H5T_NATIVE_INTEGER, memtype, error) CALL check("H5Tvlen_create_f",error, total_error) ! @@ -2304,7 +2304,7 @@ SUBROUTINE t_vlstring(total_error) INTEGER :: error INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - + CHARACTER(LEN=sdim), DIMENSION(1:dim0), TARGET :: & wdata = (/"Parting", "is such", "sweet ", "sorrow."/) ! Write buffer CHARACTER(LEN=sdim), DIMENSION(:), ALLOCATABLE :: rdata ! Read buffer @@ -2373,7 +2373,7 @@ SUBROUTINE t_vlstring(total_error) ! CALL H5Dget_space_f(dset, space, error) CALL check("H5Dget_space_f",error, total_error) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) CALL check("H5Sget_simple_extent_dims_f",error, total_error) CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), INT(dim0), total_error) @@ -2422,7 +2422,7 @@ SUBROUTINE t_vlstring_readwrite(total_error) INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) INTEGER(HSIZE_T), DIMENSION(1:2) :: dims2D = (/dim1,dim0/) INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - + TYPE(C_PTR), DIMENSION(1:dim0), TARGET :: wdata CHARACTER(len=7, KIND=c_char), DIMENSION(1:1), TARGET :: A = "123456"//C_NULL_CHAR CHARACTER(len=5, KIND=c_char), DIMENSION(1:1), TARGET :: B = "7890"//C_NULL_CHAR @@ -2430,7 +2430,7 @@ SUBROUTINE t_vlstring_readwrite(total_error) CHARACTER(len=3, KIND=c_char), DIMENSION(1:1), TARGET :: D = "df"//C_NULL_CHAR TYPE(C_PTR), DIMENSION(1:dim1,1:dim0), TARGET :: wdata2D - + CHARACTER(len=7, KIND=c_char), DIMENSION(1:1), TARGET :: A11 = "A(1,1)"//C_NULL_CHAR CHARACTER(len=4, KIND=c_char), DIMENSION(1:1), TARGET :: A12 = "A12"//C_NULL_CHAR CHARACTER(len=5, KIND=c_char), DIMENSION(1:1), TARGET :: A13 = "A_13"//C_NULL_CHAR @@ -2566,13 +2566,13 @@ SUBROUTINE t_vlstring_readwrite(total_error) CALL H5Dget_space_f(dset, space, error) CALL check("H5Dget_space_f",error, total_error) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) CALL check("H5Sget_simple_extent_dims_f",error, total_error) ALLOCATE(rdata(1:dims(1))) ! ! Read the data. ! - + f_ptr = C_LOC(rdata(1)) CALL h5dread_f(dset, H5T_STRING, f_ptr, error) CALL check("H5Dread_f",error, total_error) @@ -2612,14 +2612,14 @@ SUBROUTINE t_vlstring_readwrite(total_error) CALL check("H5Dget_space_f",error, total_error) - CALL H5Sget_simple_extent_dims_f(space, dims2D, maxdims, error) + CALL H5Sget_simple_extent_dims_f(space, dims2D, maxdims, error) CALL check("H5Sget_simple_extent_dims_f",error, total_error) ALLOCATE(rdata2D(1:dims2D(1),1:dims2D(2))) ! ! Read the data. ! - + f_ptr = C_LOC(rdata2D(1,1)) CALL h5dread_f(dset, H5T_STRING, f_ptr, error) CALL check("H5Dread_f",error, total_error) @@ -2736,7 +2736,7 @@ SUBROUTINE t_string(total_error) ! CALL H5Dget_space_f(dset, space, error) CALL check("H5Dget_space_f",error, total_error) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) CALL check("H5Sget_simple_extent_dims_f",error, total_error) CALL VERIFY("H5Sget_simple_extent_dims_f", dims(1), INT(dim0,hsize_t), total_error) @@ -2744,9 +2744,9 @@ SUBROUTINE t_string(total_error) ! ! Create the memory datatype. ! - CALL H5Tcopy_f(H5T_FORTRAN_S1, memtype, error) + CALL H5Tcopy_f(H5T_FORTRAN_S1, memtype, error) CALL check("H5Tcopy_f",error, total_error) - CALL H5Tset_size_f(memtype, sdim, error) + CALL H5Tset_size_f(memtype, sdim, error) CALL check("H5Tset_size_f",error, total_error) ! ! Read the data. @@ -2777,9 +2777,9 @@ SUBROUTINE t_string(total_error) END SUBROUTINE t_string SUBROUTINE vl_test_special_char(total_error) - + IMPLICIT NONE - + ! INTERFACE ! SUBROUTINE setup_buffer(data_in, line_lengths, char_type) ! USE HDF5 @@ -2790,9 +2790,9 @@ SUBROUTINE vl_test_special_char(total_error) ! CHARACTER(KIND=C_CHAR,LEN=*) :: char_type ! END SUBROUTINE setup_buffer ! END INTERFACE - + INTEGER, INTENT(OUT) :: total_error - + CHARACTER(LEN=16), PARAMETER :: filename = "t_controlchar.h5" INTEGER, PARAMETER :: line_length = 10 INTEGER(hid_t) :: file @@ -2815,7 +2815,7 @@ SUBROUTINE vl_test_special_char(total_error) ! CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) CALL check("h5fcreate_f",error, total_error) - + max_dims = (/H5S_UNLIMITED_F/) ! @@ -2835,7 +2835,7 @@ SUBROUTINE vl_test_special_char(total_error) CALL check("h5pcreate_f", error, total_error) CALL h5pset_chunk_f(dcpl, 1, chunk, error) CALL check("h5pset_chunk_f", error, total_error) - + data_dims(1) = line_length data_dims(2) = n ! @@ -2855,7 +2855,7 @@ SUBROUTINE vl_test_special_char(total_error) ! CALL h5dread_vl_f(dataset0, string_id, data_out(1:n), data_dims, line_lengths(1:n), error, space) CALL check("h5dread_vl_f", error, total_error) - + DO j = 1, n IF(data_in(j).NE.data_out(j))THEN total_error = total_error + 1 @@ -2873,17 +2873,17 @@ SUBROUTINE vl_test_special_char(total_error) CALL check("h5sclose_f", error, total_error) CALL h5fclose_f(file, error) CALL check("h5fclose_f", error, total_error) - + END SUBROUTINE vl_test_special_char SUBROUTINE setup_buffer(data_in, line_lengths, char_type) - + IMPLICIT NONE - + ! Creates a simple "Data_in" consisting of the letters of the alphabet, ! one per line, with a control character. - + CHARACTER(len=10), DIMENSION(:) :: data_in INTEGER(size_t), DIMENSION(:) :: line_lengths CHARACTER(LEN=3) :: lets = 'abc' @@ -2904,7 +2904,7 @@ SUBROUTINE setup_buffer(data_in, line_lengths, char_type) END DO data_in(n:n) = char_type(1:1) line_lengths(n) = 1 - + END SUBROUTINE setup_buffer !------------------------------------------------------------------------- @@ -2919,9 +2919,9 @@ END SUBROUTINE setup_buffer ! Decemeber 7, 2010 ! ! Modifications: Moved this subroutine from the 1.8 test file and -! modified it to use F2003 features. -! This routine requires 4 byte reals, so we use F2003 features to -! ensure the requirement is satisfied in a portable way. +! modified it to use F2003 features. +! This routine requires 4 byte reals, so we use F2003 features to +! ensure the requirement is satisfied in a portable way. ! The need for this arises when a user specifies the default real is 8 bytes. ! MSB 7/31/12 ! @@ -2934,7 +2934,7 @@ SUBROUTINE test_nbit(total_error ) INTEGER, PARAMETER :: wp = C_FLOAT !should map to REAL*4 on most modern processors INTEGER, INTENT(INOUT) :: total_error INTEGER(hid_t) :: file - + INTEGER(hid_t) :: dataset, datatype, space, dc, mem_type_id INTEGER(hsize_t), DIMENSION(1:2) :: dims = (/2,5/) INTEGER(hsize_t), DIMENSION(1:2) :: chunk_dim = (/2,5/) @@ -2972,14 +2972,14 @@ SUBROUTINE test_nbit(total_error ) PRECISION = 20 CALL H5Tset_precision_f(datatype,PRECISION, error) CALL CHECK(" H5Tset_precision_f", error, total_error) - + CALL H5Tset_size_f(datatype, 4_size_t, error) CALL CHECK(" H5Tset_size_f", error, total_error) - + CALL H5Tset_ebias_f(datatype, 31_size_t, error) CALL CHECK(" H5Tset_ebias_f", error, total_error) - - ! Create the data space + + ! Create the data space CALL H5Screate_simple_f(2, dims, space, error) CALL CHECK(" H5Screate_simple_f", error, total_error) @@ -3011,7 +3011,7 @@ SUBROUTINE test_nbit(total_error ) !---------------------------------------------------------------------- ! STEP 2: Try to read the data we just wrote. !---------------------------------------------------------------------- - ! + ! f_ptr = C_LOC(new_data(1,1)) CALL H5Dread_f(dataset, mem_type_id, f_ptr, error) CALL CHECK(" H5Dread_f", error, total_error) @@ -3021,7 +3021,7 @@ SUBROUTINE test_nbit(total_error ) ! i_loop: DO i = 1, dims(1) j_loop: DO j = 1, dims(2) - + IF(.NOT.(orig_data(i,j).EQ.orig_data(i,j))) CYCLE ! skip IF value is NaN IF( .NOT.check_real_eq( new_data(i,j), orig_data(i,j)) ) THEN @@ -3079,7 +3079,7 @@ SUBROUTINE t_enum_conv(total_error) INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(9) !should map to INTEGER*4 on most modern processors INTEGER, PARAMETER :: int_kind_16 = SELECTED_INT_KIND(18) !should map to INTEGER*8 on most modern processors - + INTEGER, PARAMETER :: real_kind_7 = C_FLOAT !should map to REAL*4 on most modern processors INTEGER(hid_t) :: cwg=-1, dtype=-1, space=-1, dset=-1 ! Handles @@ -3092,7 +3092,7 @@ SUBROUTINE t_enum_conv(total_error) INTEGER(KIND(E1_RED)), TARGET :: val - ! Enumerated data array + ! Enumerated data array ! Some values are out of range for testing. The library should accept them INTEGER(KIND(E1_RED)), DIMENSION(1:20), TARGET :: data1 = (/INT(E1_RED,KIND(E1_RED)), & INT(E1_GREEN,KIND(E1_RED)), INT(E1_BLUE,KIND(E1_RED)), & @@ -3140,7 +3140,7 @@ SUBROUTINE t_enum_conv(total_error) ! ! Initialize enum data. ! - + val = E1_RED CALL H5Tenum_insert_f(dtype, "RED", C_LOC(val), error) CALL check("h5tenum_insert_f",error, total_error) @@ -3208,7 +3208,7 @@ SUBROUTINE t_enum_conv(total_error) ENDIF ENDDO - ! Test converting the data to (KIND=C_double) number. + ! Test converting the data to (KIND=C_double) number. ! Read enum data back as (KIND=C_double) number m_baset = h5kind_to_type(KIND(data_double(1)), H5_REAL_KIND) ! Memory base type @@ -3225,7 +3225,7 @@ SUBROUTINE t_enum_conv(total_error) ENDIF ENDDO - ! Test converting the data to (SELECTED_INT_KIND(9)) number. + ! Test converting the data to (SELECTED_INT_KIND(9)) number. ! Read enum data back as (SELECTED_INT_KIND(9)) number m_baset = h5kind_to_type(int_kind_8, H5_INTEGER_KIND) ! Memory base type @@ -3242,7 +3242,7 @@ SUBROUTINE t_enum_conv(total_error) ENDIF ENDDO - ! Test converting the data to (SELECTED_INT_KIND(18)) number. + ! Test converting the data to (SELECTED_INT_KIND(18)) number. ! Read enum data back as (SELECTED_INT_KIND(18)) number m_baset = h5kind_to_type(int_kind_16, H5_INTEGER_KIND) ! Memory base type @@ -3259,7 +3259,7 @@ SUBROUTINE t_enum_conv(total_error) ENDIF ENDDO - ! Test converting the data to C_FLOAT number. + ! Test converting the data to C_FLOAT number. ! Read enum data back as C_FLOAT number m_baset = h5kind_to_type(KIND(data_r7(1)), H5_REAL_KIND) ! Memory base type @@ -3287,13 +3287,13 @@ SUBROUTINE t_enum_conv(total_error) m_baset = h5kind_to_type(KIND(data_int(1)), H5_INTEGER_KIND) ! Memory base type CALL h5dcreate_f(cwg, "color_table2", m_baset, space, dset, error) CALL check("h5dcreate_f", error, total_error) - + ! Write the enum data f_ptr = C_LOC(data1(1)) CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) CALL check("h5dwrite_f", error, total_error) - ! Test reading back the data with no conversion + ! Test reading back the data with no conversion f_ptr = C_LOC(data_int(1)) CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) CALL check("h5dread_f", error, total_error) @@ -3321,7 +3321,7 @@ SUBROUTINE t_enum_conv(total_error) CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) CALL check("h5dwrite_f", error, total_error) - ! Test reading back the data with no conversion + ! Test reading back the data with no conversion f_ptr = C_LOC(data_double(1)) CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) CALL check("h5dread_f", error, total_error) @@ -3349,7 +3349,7 @@ SUBROUTINE t_enum_conv(total_error) CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) CALL check("h5dwrite_f", error, total_error) - ! Test reading back the data with no conversion + ! Test reading back the data with no conversion f_ptr = C_LOC(data_r7(1)) CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) CALL check("h5dread_f", error, total_error) @@ -3372,13 +3372,13 @@ SUBROUTINE t_enum_conv(total_error) m_baset = h5kind_to_type(KIND(data_i16(1)), H5_INTEGER_KIND) ! Memory base type CALL h5dcreate_f(cwg, "color_table5", m_baset, space, dset, error) CALL check("h5dcreate_f", error, total_error) - + ! Write the enum data f_ptr = C_LOC(data1(1)) CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) CALL check("h5dwrite_f", error, total_error) - ! Test reading back the data with no conversion + ! Test reading back the data with no conversion f_ptr = C_LOC(data_i16(1)) CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) CALL check("h5dread_f", error, total_error) diff --git a/fortran/test/tH5VL.F90 b/fortran/test/tH5VL.F90 index 7ef9c19..18909e1 100644 --- a/fortran/test/tH5VL.F90 +++ b/fortran/test/tH5VL.F90 @@ -21,7 +21,7 @@ ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ! ! CONTAINS SUBROUTINES -! vl_test_integer, vl_test_real, vl_test_string +! vl_test_integer, vl_test_real, vl_test_string ! !***** @@ -119,7 +119,7 @@ CONTAINS - ! + ! ! End access to the dataset and release resources used by it. ! CALL h5dclose_f(dset_id, error) diff --git a/fortran/test/tHDF5_F03.F90 b/fortran/test/tHDF5_F03.F90 index 96959d8..46e889b 100644 --- a/fortran/test/tHDF5_F03.F90 +++ b/fortran/test/tHDF5_F03.F90 @@ -7,7 +7,7 @@ ! src/fortran/test/tHDF5_F03.f90 ! ! PURPOSE -! This is the test module used for testing the Fortran2003 HDF +! This is the test module used for testing the Fortran2003 HDF ! library APIS. ! ! COPYRIGHT diff --git a/fortran/test/tf.F90 b/fortran/test/tf.F90 index 4df53bd..00e8966 100644 --- a/fortran/test/tf.F90 +++ b/fortran/test/tf.F90 @@ -79,7 +79,7 @@ CONTAINS CHARACTER(LEN=8), PARAMETER :: success = ' PASSED ' CHARACTER(LEN=8), PARAMETER :: failure = '*FAILED*' CHARACTER(LEN=8), PARAMETER :: skip = '--SKIP--' - + error_string = failure IF (test_result == 0) THEN @@ -167,7 +167,7 @@ CONTAINS full_namelen = LEN(full_name) hdferr = h5_fixname_c(base_name, base_namelen, fapl, & full_name, full_namelen) - + END SUBROUTINE h5_fixname_f !---------------------------------------------------------------------- @@ -200,7 +200,7 @@ CONTAINS CHARACTER(LEN=*), INTENT(IN) :: base_name ! base name INTEGER, INTENT(OUT) :: hdferr ! Error code INTEGER(HID_T), INTENT(IN) :: fapl ! file access property list - + INTEGER(SIZE_T) :: base_namelen ! Length of the base name character string INTERFACE @@ -215,10 +215,10 @@ CONTAINS INTEGER(HID_T), INTENT(IN) :: fapl END FUNCTION h5_cleanup_c END INTERFACE - + base_namelen = LEN(base_name) hdferr = h5_cleanup_c(base_name, base_namelen, fapl) - + END SUBROUTINE h5_cleanup_f !---------------------------------------------------------------------- @@ -258,7 +258,7 @@ CONTAINS INTEGER, INTENT(IN) :: status END SUBROUTINE h5_exit_c END INTERFACE - + CALL h5_exit_c(status) END SUBROUTINE h5_exit_f @@ -287,7 +287,7 @@ CONTAINS IMPLICIT NONE LOGICAL, INTENT(OUT) :: HDF5_NOCLEANUP ! Return code INTEGER :: status - + INTERFACE SUBROUTINE h5_env_nocleanup_c(status) !DEC$ IF DEFINED(HDF5F90_WINDOWS) @@ -296,12 +296,12 @@ CONTAINS INTEGER :: status END SUBROUTINE h5_env_nocleanup_c END INTERFACE - + CALL h5_env_nocleanup_c(status) - + HDF5_NOCLEANUP = .FALSE. IF(status.EQ.1) HDF5_NOCLEANUP = .TRUE. - + END SUBROUTINE h5_env_nocleanup_f ! --------------------------------------------------------------------------------------------------- @@ -310,11 +310,11 @@ CONTAINS ! NOTES ! (1) The Sun/Oracle compiler has the following restrictions on the SIZEOF intrinsic function: ! -! "The SIZEOF intrinsic cannot be applied to arrays of an assumed size, characters of a -! length that is passed, or subroutine calls or names. SIZEOF returns default INTEGER*4 data. -! If compiling for a 64-bit environment, the compiler will issue a warning if the result overflows -! the INTEGER*4 data range. To use SIZEOF in a 64-bit environment with arrays larger -! than the INTEGER*4 limit (2 Gbytes), the SIZEOF function and +! "The SIZEOF intrinsic cannot be applied to arrays of an assumed size, characters of a +! length that is passed, or subroutine calls or names. SIZEOF returns default INTEGER*4 data. +! If compiling for a 64-bit environment, the compiler will issue a warning if the result overflows +! the INTEGER*4 data range. To use SIZEOF in a 64-bit environment with arrays larger +! than the INTEGER*4 limit (2 Gbytes), the SIZEOF function and ! the variables receiving the result must be declared INTEGER*8." ! ! Thus, we can not overload the H5_SIZEOF function to handle arrays (as used in tH5P_F03.f90), or diff --git a/fortran/test/vol_connector.F90 b/fortran/test/vol_connector.F90 index d346737..bc4974f 100644 --- a/fortran/test/vol_connector.F90 +++ b/fortran/test/vol_connector.F90 @@ -68,7 +68,7 @@ CONTAINS ! Register the connector by name CALL H5VLregister_connector_by_name_f(NATIVE_VOL_CONNECTOR_NAME, vol_id, error) CALL check("H5VLregister_connector_by_name_f",error,total_error) - + ! The connector should be registered now CALL H5VLis_connector_registered_by_name_f(NATIVE_VOL_CONNECTOR_NAME, is_registered, error) CALL check("H5VLis_connector_registered_by_name_f",error,total_error) @@ -174,7 +174,7 @@ CONTAINS CALL H5VLregister_connector_by_name_f(NATIVE_VOL_CONNECTOR_NAME, vol_id, error) CALL check("H5VLregister_connector_by_name_f",error,total_error) - + ! The connector should be registered now CALL H5VLis_connector_registered_by_name_f(NATIVE_VOL_CONNECTOR_NAME, is_registered, error) CALL check("H5VLis_connector_registered_by_name_f",error,total_error) @@ -195,7 +195,7 @@ CONTAINS f_ptr = C_NULL_PTR CALL H5Pset_vol_f(fapl_id, vol_id, error, f_ptr) CALL check("H5Pset_vol_f",error,total_error) - + CALL H5Pget_vol_id_f(fapl_id, vol_id_out, error) CALL check("H5Pget_vol_id_f",error,total_error) CALL VERIFY("H5Pget_vol_id_f", vol_id_out, vol_id, total_error) @@ -275,7 +275,7 @@ PROGRAM vol_connector WRITE(*, fmt = '(I4)', advance='NO') total_error WRITE(*, fmt = '(A)' ) ' error(s) ! ' WRITE(*,'(18X,A)') '============================================' - + CALL h5close_f(error) ! if errors detected, exit with non-zero code. diff --git a/hl/fortran/src/H5DSff.F90 b/hl/fortran/src/H5DSff.F90 index 5488bb2..6dcb450 100644 --- a/hl/fortran/src/H5DSff.F90 +++ b/hl/fortran/src/H5DSff.F90 @@ -26,7 +26,7 @@ CONTAINS !------------------------------------------------------------------------- ! Function: H5DSset_scale_f ! -! Purpose: Convert dataset dsid to a dimension scale, with optional name, dimname. +! Purpose: Convert dataset dsid to a dimension scale, with optional name, dimname. ! ! Return: Success: 0, Failure: -1 ! @@ -93,28 +93,28 @@ CONTAINS IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with. INTEGER :: errcode ! error code INTEGER :: c_idx - + INTERFACE INTEGER FUNCTION H5DSattach_scale_c(did, dsid, idx) & - BIND(C,NAME='h5dsattach_scale_c') + BIND(C,NAME='h5dsattach_scale_c') IMPORT :: HID_T IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with. END FUNCTION H5DSattach_scale_c END INTERFACE - c_idx = idx -1 ! account for C-dimensions starting at 0 - + c_idx = idx -1 ! account for C-dimensions starting at 0 + errcode = H5DSattach_scale_c( did, dsid, c_idx) - + END SUBROUTINE H5DSattach_scale_f - + !------------------------------------------------------------------------- ! Function: H5DSdetach_scale_f ! @@ -133,37 +133,37 @@ CONTAINS !------------------------------------------------------------------------- SUBROUTINE H5DSdetach_scale_f( did, dsid, idx, errcode) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached INTEGER , INTENT(in) :: idx ! the dimension of did to detach INTEGER :: errcode ! error code INTEGER :: c_idx - + INTERFACE INTEGER FUNCTION H5DSdetach_scale_c(did, dsid, idx) & BIND(C,NAME='h5dsdetach_scale_c') IMPORT :: HID_T IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached INTEGER , INTENT(in) :: idx ! the dimension of did to detach END FUNCTION H5DSdetach_scale_c END INTERFACE - c_idx = idx - 1 ! account for C-dimensions starting at 0 + c_idx = idx - 1 ! account for C-dimensions starting at 0 errcode = H5DSdetach_scale_c( did, dsid, c_idx) - + END SUBROUTINE H5DSdetach_scale_f !------------------------------------------------------------------------- ! Function: H5DSis_attached_f ! -! Purpose: Report if dimension scale dsid is currently attached to dimension idx of dataset did. +! Purpose: Report if dimension scale dsid is currently attached to dimension idx of dataset did. ! ! Return: Success: 0, Failure: -1 ! @@ -178,32 +178,32 @@ CONTAINS !------------------------------------------------------------------------- SUBROUTINE H5DSis_attached_f( did, dsid, idx, is_attached, errcode) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: did ! the dataset INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with - LOGICAL , INTENT(out) :: is_attached ! logical: dimension scale dsid is currently attached to + LOGICAL , INTENT(out) :: is_attached ! logical: dimension scale dsid is currently attached to ! dimension idx of dataset did INTEGER :: errcode ! error code INTEGER :: c_is_attached INTEGER :: c_idx - + INTERFACE INTEGER FUNCTION H5DSis_attached_c(did, dsid, idx, c_is_attached) & BIND(C,NAME='h5dsis_attached_c') IMPORT :: HID_T IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached INTEGER , INTENT(in) :: idx ! the dimension of did to detach - INTEGER , INTENT(out) :: c_is_attached ! dimension scale dsid is currently attached to + INTEGER , INTENT(out) :: c_is_attached ! dimension scale dsid is currently attached to END FUNCTION H5DSis_attached_c END INTERFACE - c_idx = idx - 1 ! account for C-dimensions starting at 0 - + c_idx = idx - 1 ! account for C-dimensions starting at 0 + errcode = H5DSis_attached_c(did, dsid, c_idx, c_is_attached) is_attached = .FALSE. ! default @@ -212,7 +212,7 @@ CONTAINS ELSE IF(errcode.LT.0)THEN errcode = -1 ENDIF - + END SUBROUTINE H5DSis_attached_f ! @@ -222,7 +222,7 @@ CONTAINS !------------------------------------------------------------------------- ! Function: H5DSis_scale_f ! -! Purpose: Determines whether dset is a Dimension Scale. +! Purpose: Determines whether dset is a Dimension Scale. ! ! Return: Success: 0, Failure: -1 ! @@ -237,15 +237,15 @@ CONTAINS !------------------------------------------------------------------------- SUBROUTINE H5DSis_scale_f( did, is_scale, errcode) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: did ! the data set to query - LOGICAL , INTENT(out) :: is_scale ! logical: + LOGICAL , INTENT(out) :: is_scale ! logical: ! .TRUE. if did is a Dimension Scale INTEGER :: errcode ! error code INTEGER :: c_is_scale - + INTERFACE INTEGER FUNCTION H5DSis_scale_c(did,c_is_scale) & BIND(C,NAME='h5dsis_scale_c') @@ -255,7 +255,7 @@ CONTAINS INTEGER, INTENT(out) :: c_is_scale END FUNCTION H5DSis_scale_c END INTERFACE - + errcode = H5DSis_scale_c(did, c_is_scale) is_scale = .FALSE. ! default @@ -264,7 +264,7 @@ CONTAINS ELSE IF(errcode.LT.0)THEN errcode = -1 ENDIF - + END SUBROUTINE H5DSis_scale_f !------------------------------------------------------------------------- @@ -319,7 +319,7 @@ CONTAINS !------------------------------------------------------------------------- ! Function: H5DSget_label_f ! -! Purpose: Read the label for dimension idx of did into buffer label. +! Purpose: Read the label for dimension idx of did into buffer label. ! ! Return: Success: 0, Failure: -1 ! @@ -431,7 +431,7 @@ CONTAINS INTEGER , INTENT(INOUT) :: num_scales ! the number of Dimension Scales associated with did INTEGER :: errcode ! error code INTEGER :: c_idx - + INTERFACE INTEGER FUNCTION H5DSget_num_scales_c(did, idx, num_scales) & BIND(C,NAME='h5dsget_num_scales_c') @@ -442,10 +442,10 @@ CONTAINS INTEGER , INTENT(INOUT) :: num_scales ! the number of Dimension Scales associated with did END FUNCTION H5DSget_num_scales_c END INTERFACE - + c_idx = idx - 1 errcode = H5DSget_num_scales_c(did, c_idx, num_scales) - + END SUBROUTINE H5DSget_num_scales_f END MODULE h5ds diff --git a/hl/fortran/src/H5HL_buildiface.F90 b/hl/fortran/src/H5HL_buildiface.F90 index 1c5d9c8..7aac9a2 100644 --- a/hl/fortran/src/H5HL_buildiface.F90 +++ b/hl/fortran/src/H5HL_buildiface.F90 @@ -13,8 +13,8 @@ ! depending on which of the KIND values are found. ! ! NOTES -! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF -! depending on availablity.It generates code that makes use of +! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF +! depending on availablity.It generates code that makes use of ! STORAGE_SIZE/SIZEOF in H5fortran_detect.f90. STORAGE_SIZE is standard ! compliant and should always be chosen over SIZEOF. ! @@ -88,7 +88,7 @@ PROGRAM H5HL_buildiface ! ! Developer's notes: ! -! Only interfaces with arrays of rank 7 and less are provided. Even-though the F2008 +! Only interfaces with arrays of rank 7 and less are provided. Even-though the F2008 ! standard extended the maximum rank to 15, it was decided that they should use the ! new APIs to handle those use cases. Handling rank 7 and less is for backward compatibility ! with the Fortran 90/95 APIs codes which could never handle rank 8-15 array sizes. @@ -266,7 +266,7 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' INTEGER :: errcode ' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr)' @@ -297,7 +297,7 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' INTEGER :: errcode ' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr)' @@ -327,8 +327,8 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER :: errcode ' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,f_ptr)' @@ -357,8 +357,8 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER :: errcode ' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,f_ptr)' @@ -387,8 +387,8 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER :: errcode ' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,f_ptr)' @@ -417,8 +417,8 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' WRITE(11,'(A)') ' INTEGER :: errcode ' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,f_ptr)' @@ -450,7 +450,7 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' INTEGER :: errcode ' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id, namelen, dset_name, rank, dims, type_id, f_ptr)' @@ -482,7 +482,7 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' WRITE(11,'(A)') ' INTEGER(hid_t) :: type_id' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' type_id = h5kind_to_type(KIND('//f_ptr_line(j)(19:36)//'), H5_INTEGER_KIND)' @@ -680,10 +680,10 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' INTEGER(size_t), INTENT(in) :: type_size' WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN), DIMENSION(*), TARGET :: buf' WRITE(11,'(A)') ' INTEGER :: errcode ' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen1' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen1' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' namelen1 = LEN(field_name)' @@ -714,10 +714,10 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' INTEGER(size_t), INTENT(in) :: type_size' WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT), DIMENSION(*), TARGET :: buf' WRITE(11,'(A)') ' INTEGER :: errcode ' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen1' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen1' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' namelen1 = LEN(field_name)' @@ -748,9 +748,9 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' INTEGER(size_t), INTENT(in) :: type_size' WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN), DIMENSION(*), TARGET :: buf' WRITE(11,'(A)') ' INTEGER :: errcode ' - WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') & @@ -782,7 +782,7 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' INTEGER :: errcode ' WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') & @@ -814,7 +814,7 @@ PROGRAM H5HL_buildiface WRITE(11,'(A)') ' INTEGER(size_t) :: namelen1' WRITE(11,'(A)') ' INTEGER :: errcode' WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' - + WRITE(11,'(A)') f_ptr_line(j) WRITE(11,'(A)') ' namelen = LEN(dset_name)' WRITE(11,'(A)') ' namelen1 = LEN(field_name)' diff --git a/hl/fortran/src/H5IMff.F90 b/hl/fortran/src/H5IMff.F90 index ac4b794..ffa18aa 100644 --- a/hl/fortran/src/H5IMff.F90 +++ b/hl/fortran/src/H5IMff.F90 @@ -22,7 +22,7 @@ ! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** ! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** ! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| -! +! ! If you add a new function here then you MUST add the function name to the ! Windows dll file 'hdf5_hl_fortrandll.def.in' in the hl/fortran/src directory. ! This is needed for Windows based operating systems. @@ -82,10 +82,10 @@ CONTAINS INTEGER , INTENT(in), DIMENSION(*) :: buf ! buffer END FUNCTION h5immake_image_8bit_c END INTERFACE - + namelen = LEN(dset_name) errcode = h5immake_image_8bit_c(loc_id,namelen,dset_name,width,height,buf) - + END SUBROUTINE h5immake_image_8bit_f !------------------------------------------------------------------------- @@ -110,7 +110,7 @@ CONTAINS errcode ) IMPLICIT NONE - + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset INTEGER, INTENT(inout), DIMENSION(*) :: buf ! buffer @@ -129,10 +129,10 @@ CONTAINS INTEGER, INTENT(inout), DIMENSION(*) :: buf ! buffer END FUNCTION h5imread_image_c END INTERFACE - + namelen = LEN(dset_name) errcode = h5imread_image_c(loc_id,namelen,dset_name,buf) - + END SUBROUTINE h5imread_image_f !------------------------------------------------------------------------- @@ -159,7 +159,7 @@ CONTAINS il,& buf,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier @@ -171,7 +171,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: ILEN ! name length - + INTERFACE INTEGER FUNCTION h5immake_image_24bit_c(loc_id,namelen,dset_name,ILEN,il,width,height,buf) & BIND(C,NAME='h5immake_image_24bit_c') @@ -186,14 +186,14 @@ CONTAINS INTEGER, INTENT(in), DIMENSION(*) :: buf ! buffer INTEGER(size_t) :: namelen ! length of name buffer INTEGER(size_t) :: ILEN ! name length - + END FUNCTION h5immake_image_24bit_c END INTERFACE - + namelen = LEN(dset_name) ILEN = LEN(il) errcode = h5immake_image_24bit_c(loc_id,namelen,dset_name,ILEN,il,width,height,buf) - + END SUBROUTINE h5immake_image_24bit_f !------------------------------------------------------------------------- @@ -222,7 +222,7 @@ CONTAINS interlace,& npals,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier @@ -235,7 +235,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: ILEN ! name length - + INTERFACE INTEGER FUNCTION h5imget_image_info_c(loc_id,namelen,dset_name,width,height,planes,npals,ILEN,interlace) & BIND(C,NAME='h5imget_image_info_c') @@ -253,11 +253,11 @@ CONTAINS INTEGER(size_t) :: ILEN ! name length END FUNCTION h5imget_image_info_c END INTERFACE - + namelen = LEN(dset_name) ILEN = LEN(interlace) errcode = h5imget_image_info_c(loc_id,namelen,dset_name,width,height,planes,npals,ILEN,interlace) - + END SUBROUTINE h5imget_image_info_f !------------------------------------------------------------------------- @@ -286,7 +286,7 @@ CONTAINS CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length - + INTERFACE INTEGER FUNCTION h5imis_image_c(loc_id,namelen,dset_name) & BIND(C,NAME='h5imis_image_c') @@ -298,13 +298,13 @@ CONTAINS CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset END FUNCTION h5imis_image_c END INTERFACE - + namelen = LEN(dset_name) errcode = h5imis_image_c(loc_id,namelen,dset_name) h5imis_image_f = errcode - + END FUNCTION h5imis_image_f - + !------------------------------------------------------------------------- ! Function: h5immake_palette_f @@ -328,16 +328,16 @@ CONTAINS pal_dims,& buf,& errcode ) - + IMPLICIT NONE - + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset INTEGER(hsize_t), INTENT(in), DIMENSION(*) :: pal_dims ! dimensions INTEGER, INTENT(in), DIMENSION(*) :: buf ! buffer INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length - + INTERFACE INTEGER FUNCTION h5immake_palette_c(loc_id,namelen,dset_name,pal_dims,buf) & BIND(C,NAME='h5immake_palette_c') @@ -351,12 +351,12 @@ CONTAINS INTEGER, INTENT(in), DIMENSION(*) :: buf ! buffer END FUNCTION h5immake_palette_c END INTERFACE - + namelen = LEN(dset_name) errcode = h5immake_palette_c(loc_id,namelen,dset_name,pal_dims,buf) - + END SUBROUTINE h5immake_palette_f - + !------------------------------------------------------------------------- ! Function: h5imlink_palette_f ! @@ -378,16 +378,16 @@ CONTAINS dset_name,& pal_name,& errcode ) - + IMPLICIT NONE - + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset CHARACTER(len=*), INTENT(in) :: pal_name ! palette name INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: ILEN ! name length - + INTERFACE INTEGER FUNCTION h5imlink_palette_c(loc_id,namelen,dset_name,ILEN,pal_name) & BIND(C,NAME='h5imlink_palette_c') @@ -401,13 +401,13 @@ CONTAINS INTEGER(size_t) :: ILEN ! name length END FUNCTION h5imlink_palette_c END INTERFACE - + namelen = LEN(dset_name) ILEN = LEN(pal_name) errcode = h5imlink_palette_c(loc_id,namelen,dset_name,ILEN,pal_name) - + END SUBROUTINE h5imlink_palette_f - + !------------------------------------------------------------------------- ! Function: h5imunlink_palette_f @@ -430,7 +430,7 @@ CONTAINS dset_name,& pal_name,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier @@ -439,7 +439,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: ILEN ! name length - + INTERFACE INTEGER FUNCTION h5imunlink_palette_c(loc_id,namelen,dset_name,ILEN,pal_name) & BIND(C,NAME='h5imunlink_palette_c') @@ -453,13 +453,13 @@ CONTAINS INTEGER(size_t) :: ILEN ! name length END FUNCTION h5imunlink_palette_c END INTERFACE - + namelen = LEN(dset_name) ILEN = LEN(pal_name) errcode = h5imunlink_palette_c(loc_id,namelen,dset_name,ILEN,pal_name) - + END SUBROUTINE h5imunlink_palette_f - + !------------------------------------------------------------------------- ! Function: h5imget_npalettes_f ! @@ -481,7 +481,7 @@ CONTAINS dset_name,& npals,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier @@ -489,7 +489,7 @@ CONTAINS INTEGER(hsize_t), INTENT(inout) :: npals ! palettes INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length - + INTERFACE INTEGER FUNCTION h5imget_npalettes_c(loc_id,namelen,dset_name,npals) & BIND(C,NAME='h5imget_npalettes_c') @@ -502,10 +502,10 @@ CONTAINS INTEGER(size_t) :: namelen ! name length END FUNCTION h5imget_npalettes_c END INTERFACE - + namelen = LEN(dset_name) errcode = h5imget_npalettes_c(loc_id,namelen,dset_name,npals) - + END SUBROUTINE h5imget_npalettes_f @@ -531,7 +531,7 @@ CONTAINS pal_number,& dims,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier @@ -540,7 +540,7 @@ CONTAINS INTEGER(hsize_t), DIMENSION(*), INTENT(inout) :: dims ! dimensions INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length - + INTERFACE INTEGER FUNCTION h5imget_palette_info_c(loc_id,namelen,dset_name,pal_number,dims) & BIND(C,NAME='h5imget_palette_info_c') @@ -554,10 +554,10 @@ CONTAINS INTEGER(size_t) :: namelen ! name length END FUNCTION h5imget_palette_info_c END INTERFACE - + namelen = LEN(dset_name) errcode = h5imget_palette_info_c(loc_id,namelen,dset_name,pal_number,dims) - + END SUBROUTINE h5imget_palette_info_f !------------------------------------------------------------------------- @@ -582,7 +582,7 @@ CONTAINS pal_number,& buf,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier @@ -591,7 +591,7 @@ CONTAINS INTEGER, INTENT(inout), DIMENSION(*) :: buf ! buffer INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length - + INTERFACE INTEGER FUNCTION h5imget_palette_c(loc_id,namelen,dset_name,pal_number,buf) & BIND(C,NAME='h5imget_palette_c') @@ -605,10 +605,10 @@ CONTAINS INTEGER, INTENT(inout), DIMENSION(*) :: buf ! buffer END FUNCTION h5imget_palette_c END INTERFACE - + namelen = LEN(dset_name) errcode = h5imget_palette_c(loc_id,namelen,dset_name,pal_number,buf) - + END SUBROUTINE h5imget_palette_f @@ -638,7 +638,7 @@ CONTAINS CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length - + INTERFACE INTEGER FUNCTION h5imis_palette_c(loc_id,namelen,dset_name) & BIND(C,NAME='h5imis_palette_c') @@ -650,11 +650,11 @@ CONTAINS CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset END FUNCTION h5imis_palette_c END INTERFACE - + namelen = LEN(dset_name) errcode = h5imis_palette_c(loc_id,namelen,dset_name) h5imis_palette_f = errcode - + END FUNCTION h5imis_palette_f END MODULE H5IM diff --git a/hl/fortran/src/H5LTff.F90 b/hl/fortran/src/H5LTff.F90 index 80f6ac5..bc8734f 100644 --- a/hl/fortran/src/H5LTff.F90 +++ b/hl/fortran/src/H5LTff.F90 @@ -22,7 +22,7 @@ ! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** ! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** ! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| -! +! ! If you add a new function here then you MUST add the function name to the ! Windows dll file 'hdf5_hl_fortrandll.def.in' in the hl/fortran/src directory. ! This is needed for Windows based operating systems. @@ -130,7 +130,7 @@ CONTAINS ! ! Comments: ! - ! Modifications: + ! Modifications: ! !------------------------------------------------------------------------- @@ -321,7 +321,7 @@ CONTAINS SUBROUTINE h5ltmake_dataset_f_int7(loc_id, dset_name, rank, dims, & type_id, buf, errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset @@ -371,7 +371,7 @@ CONTAINS INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier TYPE(C_PTR) :: buf ! data buffer INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen + INTEGER(size_t) :: namelen namelen = LEN(dset_name) errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id, buf) @@ -409,7 +409,7 @@ CONTAINS INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf INTEGER, INTENT(inout), DIMENSION(*), TARGET :: buf ! data buffer INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen + INTEGER(size_t) :: namelen TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1)) @@ -451,7 +451,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2)), TARGET :: buf + DIMENSION(dims(1),dims(2)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1)) @@ -476,7 +476,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1)) @@ -497,7 +497,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1)) @@ -518,7 +518,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1)) @@ -556,7 +556,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1,1)) @@ -577,7 +577,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) @@ -621,7 +621,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)) namelen = LEN(dset_name) @@ -644,7 +644,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2)), TARGET :: buf + DIMENSION(dims(1),dims(2)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1)) @@ -669,7 +669,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1)) @@ -690,7 +690,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1)) @@ -711,7 +711,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1)) @@ -732,7 +732,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1,1)) @@ -753,7 +753,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) @@ -793,7 +793,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1)), TARGET :: buf + DIMENSION(dims(1)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1)) @@ -816,7 +816,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2)), TARGET :: buf + DIMENSION(dims(1),dims(2)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1)) @@ -839,7 +839,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1)) @@ -858,7 +858,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1)) @@ -877,7 +877,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1)) @@ -896,7 +896,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1,1)) @@ -915,7 +915,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf TYPE(C_PTR) :: f_ptr f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) @@ -1059,14 +1059,14 @@ CONTAINS TYPE(C_PTR) :: buf ! data buffer CHARACTER(LEN=*), INTENT(in) :: buf_type ! valid data types are: ! CHARACTER, INTEGER or REAL - ! NOTE: only the first character matters and is case insensitive + ! NOTE: only the first character matters and is case insensitive INTEGER(size_t), INTENT(in) :: size ! size of attribute array - INTEGER(size_t), INTENT(in) :: SizeOf_buf_type ! size of buf's data type + INTEGER(size_t), INTENT(in) :: SizeOf_buf_type ! size of buf's data type INTEGER, INTENT(out) :: errcode ! error code INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - CHARACTER(KIND=C_CHAR) :: buf_type_uppercase + INTEGER(size_t) :: attrlen ! name length + CHARACTER(KIND=C_CHAR) :: buf_type_uppercase namelen = LEN(dset_name) attrlen = LEN(attr_name) @@ -1117,7 +1117,7 @@ CONTAINS INTEGER :: errcode ! error code INTEGER, DIMENSION(*), TARGET :: buf ! data buffer INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length + INTEGER(size_t) :: attrlen ! name length TYPE(C_PTR) :: f_ptr INTEGER(size_t) :: SizeOf_buf_type @@ -1168,7 +1168,7 @@ CONTAINS INTEGER :: errcode ! error code REAL(KIND=C_FLOAT), INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length + INTEGER(size_t) :: attrlen ! name length TYPE(C_PTR) :: f_ptr INTEGER(size_t) :: SizeOf_buf_type @@ -1222,7 +1222,7 @@ CONTAINS TYPE(C_PTR) :: f_ptr INTEGER(size_t) :: SizeOf_buf_type - f_ptr = C_LOC(buf(1)) + f_ptr = C_LOC(buf(1)) #if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 SizeOf_buf_type = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) @@ -1269,7 +1269,7 @@ CONTAINS CHARACTER(LEN=*), DIMENSION(*), INTENT(in), TARGET :: buf ! data buffer INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: attrlen ! name length - INTEGER(size_t) :: buflen ! data buffer length + INTEGER(size_t) :: buflen ! data buffer length TYPE(C_PTR) :: f_ptr INTEGER(size_t) :: SizeOf_buf_type @@ -1321,7 +1321,7 @@ CONTAINS ! CHARACTER, INTEGER or REAL ! NOTE: only the first character matters and is case insensitive INTEGER(size_t), INTENT(in) :: SizeOf_buf_type ! size of buf's data type - INTEGER, INTENT(out) :: errcode ! error code + INTEGER, INTENT(out) :: errcode ! error code INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: attrlen ! attr length CHARACTER(KIND=C_CHAR) :: buf_type_uppercase @@ -1373,11 +1373,11 @@ CONTAINS INTEGER :: errcode ! error code INTEGER, INTENT(inout), DIMENSION(*), TARGET :: buf! data buffer INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length + INTEGER(size_t) :: attrlen ! name length TYPE(C_PTR) :: f_ptr INTEGER(size_t) :: SizeOf_buf - f_ptr = C_LOC(buf(1)) + f_ptr = C_LOC(buf(1)) #if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 SizeOf_buf = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) @@ -1420,7 +1420,7 @@ CONTAINS INTEGER :: errcode ! error code REAL(KIND=C_FLOAT), INTENT(inout), DIMENSION(*), TARGET :: buf INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length + INTEGER(size_t) :: attrlen ! name length TYPE(C_PTR) :: f_ptr INTEGER(size_t) :: SizeOf_buf @@ -1470,7 +1470,7 @@ CONTAINS TYPE(C_PTR) :: f_ptr INTEGER(size_t) :: SizeOf_buf - f_ptr = C_LOC(buf(1)) + f_ptr = C_LOC(buf(1)) #if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 SizeOf_buf = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) #else @@ -1514,7 +1514,7 @@ CONTAINS CHARACTER(LEN=*), INTENT(inout) :: buf INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: attrlen ! name length - INTEGER(size_t) :: buf_size ! buf size + INTEGER(size_t) :: buf_size ! buf size INTERFACE INTEGER FUNCTION h5ltget_attribute_string_c(loc_id,namelen,dset_name,attrlen,attr_name,buf,buf_size) & @@ -1812,7 +1812,7 @@ CONTAINS !------------------------------------------------------------------------- ! Function: h5ltpath_valid_f ! - ! Purpose: Validates a path + ! Purpose: Validates a path ! ! Return: Success: 0, Failure: -1 ! @@ -1831,8 +1831,8 @@ CONTAINS IMPLICIT NONE INTEGER(hid_t) , INTENT(IN) :: loc_id ! An identifier of an object in the file. CHARACTER(LEN=*), INTENT(IN) :: path ! Path to the object to check, relative to loc_id. - LOGICAL , INTENT(IN) :: check_object_valid ! Indicates whether to check if the final component - ! of the path resolves to a valid object + LOGICAL , INTENT(IN) :: check_object_valid ! Indicates whether to check if the final component + ! of the path resolves to a valid object LOGICAL , INTENT(OUT) :: path_valid ! Object status INTEGER , INTENT(OUT) :: errcode ! Error code: 0 on success and -1 on failure @@ -1846,7 +1846,7 @@ CONTAINS IMPORT :: C_CHAR IMPORT :: HID_T, SIZE_T, HSIZE_T IMPLICIT NONE - INTEGER(hid_t), INTENT(in) :: loc_id + INTEGER(hid_t), INTENT(in) :: loc_id CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: path INTEGER(size_t) :: pathlen INTEGER :: check_object_valid_c @@ -1856,7 +1856,7 @@ CONTAINS ! Initialize path_valid = .FALSE. errcode = 0 - + check_object_valid_c = 0 IF(check_object_valid) check_object_valid_c = 1 @@ -1868,7 +1868,7 @@ CONTAINS ELSE IF(status.LT.0)THEN errcode = -1 ENDIF - + END SUBROUTINE h5ltpath_valid_f END MODULE H5LT_CONST diff --git a/hl/fortran/src/H5TBff.F90 b/hl/fortran/src/H5TBff.F90 index 40adf95..c3db01e 100644 --- a/hl/fortran/src/H5TBff.F90 +++ b/hl/fortran/src/H5TBff.F90 @@ -23,7 +23,7 @@ ! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** ! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** ! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| -! +! ! If you add a new function here then you MUST add the function name to the ! Windows dll file 'hdf5_hl_fortrandll.def.in' in the hl/fortran/src directory. ! This is needed for Windows based operating systems. @@ -31,7 +31,7 @@ #include "H5config_f.inc" MODULE h5tb_CONST - + USE, INTRINSIC :: ISO_C_BINDING USE h5fortran_types USE hdf5 @@ -40,22 +40,22 @@ MODULE h5tb_CONST MODULE PROCEDURE h5tbwrite_field_name_f_int MODULE PROCEDURE h5tbwrite_field_name_f_string END INTERFACE - + INTERFACE h5tbread_field_name_f MODULE PROCEDURE h5tbread_field_name_f_int MODULE PROCEDURE h5tbread_field_name_f_string END INTERFACE - + INTERFACE h5tbwrite_field_index_f MODULE PROCEDURE h5tbwrite_field_index_f_int MODULE PROCEDURE h5tbwrite_field_index_f_string END INTERFACE - + INTERFACE h5tbread_field_index_f MODULE PROCEDURE h5tbread_field_index_f_int MODULE PROCEDURE h5tbread_field_index_f_string END INTERFACE - + INTERFACE h5tbinsert_field_f MODULE PROCEDURE h5tbinsert_field_f_int MODULE PROCEDURE h5tbinsert_field_f_string @@ -162,7 +162,7 @@ MODULE h5tb_CONST INTEGER(size_t) :: namelen1 ! name length length END FUNCTION h5tbinsert_field_c END INTERFACE - + CONTAINS !------------------------------------------------------------------------- @@ -251,16 +251,16 @@ CONTAINS INTEGER(size_t) :: max_char_size_field_names ! character len of field names END FUNCTION h5tbmake_table_c END INTERFACE - + namelen = LEN(dset_name) namelen1 = LEN(table_title) - + ! Find the size of each character string in the array DO i = 1, nfields char_len_field_names(i) = LEN_TRIM(field_names(i)) END DO - - max_char_size_field_names = LEN(field_names(1)) + + max_char_size_field_names = LEN(field_names(1)) errcode = h5tbmake_table_c(namelen1, table_title, loc_id, namelen, dset_name, nfields, nrecords,& type_size, field_offset, field_types, chunk_size, compress, char_len_field_names, & @@ -346,16 +346,16 @@ CONTAINS TYPE(C_PTR), INTENT(in), VALUE :: data END FUNCTION h5tbmake_table_ptr_c END INTERFACE - + namelen = LEN(dset_name) namelen1 = LEN(table_title) - + ! Find the size of each character string in the array DO i = 1, nfields char_len_field_names(i) = LEN_TRIM(field_names(i)) END DO - - max_char_size_field_names = LEN(field_names(1)) + + max_char_size_field_names = LEN(field_names(1)) errcode = h5tbmake_table_ptr_c(namelen1, table_title, loc_id, namelen, dset_name, nfields, nrecords,& type_size, field_offset, field_types, chunk_size, fill_data, compress, char_len_field_names, & @@ -395,7 +395,7 @@ CONTAINS IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(LEN=1), INTENT(in) :: table_name ! name of the dataset - INTEGER(hsize_t), INTENT(in) :: nfields + INTEGER(hsize_t), INTENT(in) :: nfields INTEGER(size_t), INTENT(in) :: dst_size ! type size INTEGER(size_t), DIMENSION(1:nfields), INTENT(in) :: dst_offset ! An array containing the sizes of the fields INTEGER(size_t), DIMENSION(1:nfields), INTENT(in) :: dst_sizes ! An array containing the sizes of the fields @@ -404,7 +404,7 @@ CONTAINS END FUNCTION h5tbread_table_c END INTERFACE - + namelen = LEN(table_name) errcode = h5tbread_table_c(loc_id,& @@ -442,7 +442,7 @@ CONTAINS type_size,& buf,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset @@ -455,14 +455,14 @@ CONTAINS INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: namelen1 ! name length TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)) namelen = LEN(dset_name) namelen1 = LEN(field_name) - + errcode = h5tbwrite_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& start,nrecords,type_size,f_ptr) - + END SUBROUTINE h5tbwrite_field_name_f_int @@ -488,15 +488,15 @@ CONTAINS INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: namelen1 TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)(1:1)) namelen = LEN(dset_name) namelen1 = LEN(field_name) - + errcode = h5tbwrite_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& start,nrecords,type_size,f_ptr) - + END SUBROUTINE h5tbwrite_field_name_f_string @@ -537,15 +537,15 @@ CONTAINS INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: namelen1 TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)) ! name length namelen = LEN(dset_name) namelen1 = LEN(field_name) - + errcode = h5tbread_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& start,nrecords,type_size,f_ptr) - + END SUBROUTINE h5tbread_field_name_f_int SUBROUTINE h5tbread_field_name_f_string(loc_id,& @@ -569,15 +569,15 @@ CONTAINS INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: namelen1 ! name length TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1)(1:1)) + + f_ptr = C_LOC(buf(1)(1:1)) namelen = LEN(dset_name) namelen1 = LEN(field_name) - + errcode = h5tbread_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& start,nrecords,type_size,f_ptr) - + END SUBROUTINE h5tbread_field_name_f_string @@ -595,7 +595,7 @@ CONTAINS ! Modifications: ! !------------------------------------------------------------------------- - + SUBROUTINE h5tbwrite_field_index_f_int(loc_id,& dset_name,& field_index,& @@ -604,7 +604,7 @@ CONTAINS type_size,& buf,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset @@ -616,14 +616,14 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)) namelen = LEN(dset_name) - + errcode = h5tbwrite_field_index_c(loc_id,namelen,dset_name,field_index,& start,nrecords,type_size,f_ptr) - + END SUBROUTINE h5tbwrite_field_index_f_int SUBROUTINE h5tbwrite_field_index_f_string(loc_id,& @@ -634,7 +634,7 @@ CONTAINS type_size,& buf,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset @@ -646,13 +646,13 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)(1:1)) namelen = LEN(dset_name) - + errcode = h5tbwrite_field_index_c(loc_id,namelen,dset_name,field_index,& start,nrecords,type_size,f_ptr) - + END SUBROUTINE h5tbwrite_field_index_f_string @@ -679,7 +679,7 @@ CONTAINS type_size,& buf,& errcode ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset @@ -691,13 +691,13 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)) namelen = LEN(dset_name) - + errcode = h5tbread_field_index_c(loc_id,namelen,dset_name,field_index,& start,nrecords,type_size,f_ptr) - + END SUBROUTINE h5tbread_field_index_f_int SUBROUTINE h5tbread_field_index_f_string(loc_id,& @@ -720,13 +720,13 @@ CONTAINS INTEGER :: errcode ! error code INTEGER(size_t) :: namelen ! name length TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)(1:1)) namelen = LEN(dset_name) - + errcode = h5tbread_field_index_c(loc_id,namelen,dset_name,field_index,& start,nrecords,type_size,f_ptr) - + END SUBROUTINE h5tbread_field_index_f_string !------------------------------------------------------------------------- @@ -762,12 +762,12 @@ CONTAINS INTEGER(size_t) :: namelen1 ! name length INTEGER :: errcode ! error code TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)) namelen = LEN(dset_name) namelen1 = LEN(field_name) - + errcode = h5tbinsert_field_c(loc_id,namelen,dset_name,namelen1,field_name,& field_type,field_index,f_ptr) @@ -791,15 +791,15 @@ CONTAINS INTEGER(size_t) :: namelen1 ! name length INTEGER :: errcode ! error code TYPE(C_PTR) :: f_ptr - + f_ptr = C_LOC(buf(1)(1:1)) - + namelen = LEN(dset_name) namelen1 = LEN(field_name) - + errcode = h5tbinsert_field_c(loc_id,namelen,dset_name,namelen1,field_name,& field_type,field_index,f_ptr) - + END SUBROUTINE h5tbinsert_field_f_string !------------------------------------------------------------------------- @@ -898,9 +898,9 @@ CONTAINS namelen = LEN(dset_name) errcode = h5tbget_table_info_c(loc_id,namelen,dset_name,nfields,nrecords) - + END SUBROUTINE h5tbget_table_info_f - + !------------------------------------------------------------------------- ! Function: h5tbget_field_info_f @@ -915,9 +915,9 @@ CONTAINS ! ! Comments: ! -! Modifications: +! Modifications: ! Added optional parameter for returning the maximum character length -! in the field name array. March 3, 2011 +! in the field name array. March 3, 2011 ! !------------------------------------------------------------------------- @@ -929,7 +929,7 @@ CONTAINS field_offsets,& type_size,& errcode, maxlen_out ) - + IMPLICIT NONE INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset @@ -945,7 +945,7 @@ CONTAINS INTEGER(hsize_t) :: i ! general purpose integer INTEGER(size_t) :: maxlen INTEGER(size_t) :: c_maxlen_out - + INTERFACE INTEGER FUNCTION h5tbget_field_info_c(loc_id,namelen,dset_name,nfields,& field_sizes,field_offsets,type_size,namelen2, maxlen, field_names, c_maxlen_out) & @@ -963,7 +963,7 @@ CONTAINS INTEGER(size_t) :: namelen ! name length INTEGER(size_t) :: maxlen ! maxiumum length of input field names INTEGER(size_t), DIMENSION(1:nfields) :: namelen2 ! name lengths - INTEGER(size_t) :: c_maxlen_out ! maximum character length of a field array element + INTEGER(size_t) :: c_maxlen_out ! maximum character length of a field array element END FUNCTION h5tbget_field_info_c END INTERFACE @@ -973,14 +973,14 @@ CONTAINS END DO maxlen = LEN(field_names(1)) c_maxlen_out = 0 - + errcode = h5tbget_field_info_c(loc_id, namelen,dset_name, nfields, & field_sizes, field_offsets, type_size, namelen2, maxlen, field_names, c_maxlen_out) - + IF(PRESENT(maxlen_out)) maxlen_out = c_maxlen_out - + END SUBROUTINE h5tbget_field_info_f - + END MODULE H5TB_CONST diff --git a/hl/fortran/test/tstds.F90 b/hl/fortran/test/tstds.F90 index 387f524..e0335b6 100644 --- a/hl/fortran/test/tstds.F90 +++ b/hl/fortran/test/tstds.F90 @@ -46,7 +46,7 @@ SUBROUTINE write_test_status( test_result) IF (test_result .EQ. 0) THEN error_string = success ENDIF - + WRITE(*, fmt = '(T34, A)') error_string END SUBROUTINE write_test_status @@ -66,7 +66,7 @@ SUBROUTINE test_testds(err) IMPLICIT NONE - INTEGER, PARAMETER :: RANK = 2 ! rank of DATA dataset + INTEGER, PARAMETER :: RANK = 2 ! rank of DATA dataset INTEGER, PARAMETER :: DIM_DATA = 12 INTEGER, PARAMETER :: DIM1_SIZE = 3 INTEGER, PARAMETER :: DIM2_SIZE = 4 @@ -82,13 +82,13 @@ SUBROUTINE test_testds(err) INTEGER(hid_t) :: fid ! file ID INTEGER(hid_t) :: did ! dataset ID INTEGER(hid_t) :: dsid ! DS dataset ID - INTEGER :: rankds = 1 ! rank of DS dataset - INTEGER(hsize_t), DIMENSION(1:rank) :: dims = (/DIM2_SIZE,DIM1_SIZE/) ! size of DATA dataset - INTEGER, DIMENSION(1:DIM_DATA) :: buf = (/1,2,3,4,5,6,7,8,9,10,11,12/) ! DATA of DATA dataset - INTEGER(hsize_t), DIMENSION(1:1) :: s1_dim = (/DIM1_SIZE/) ! size of DS 1 dataset - INTEGER(hsize_t), DIMENSION(1:1) :: s2_dim = (/DIM2_SIZE/) ! size of DS 2 dataset - REAL, DIMENSION(1:DIM1_SIZE) :: s1_wbuf = (/10,20,30/) ! DATA of DS 1 dataset - INTEGER, DIMENSION(1:DIM2_SIZE) :: s2_wbuf = (/10,20,50,100/) ! DATA of DS 2 dataset + INTEGER :: rankds = 1 ! rank of DS dataset + INTEGER(hsize_t), DIMENSION(1:rank) :: dims = (/DIM2_SIZE,DIM1_SIZE/) ! size of DATA dataset + INTEGER, DIMENSION(1:DIM_DATA) :: buf = (/1,2,3,4,5,6,7,8,9,10,11,12/) ! DATA of DATA dataset + INTEGER(hsize_t), DIMENSION(1:1) :: s1_dim = (/DIM1_SIZE/) ! size of DS 1 dataset + INTEGER(hsize_t), DIMENSION(1:1) :: s2_dim = (/DIM2_SIZE/) ! size of DS 2 dataset + REAL, DIMENSION(1:DIM1_SIZE) :: s1_wbuf = (/10,20,30/) ! DATA of DS 1 dataset + INTEGER, DIMENSION(1:DIM2_SIZE) :: s2_wbuf = (/10,20,50,100/) ! DATA of DS 2 dataset INTEGER :: err INTEGER :: num_scales INTEGER(size_t) :: name_len @@ -107,7 +107,7 @@ SUBROUTINE test_testds(err) CALL H5Fcreate_f("tstds.h5",H5F_ACC_TRUNC_F, fid, err) IF(err.LT.0) RETURN - ! make a dataset + ! make a dataset CALL H5LTmake_dataset_int_f(fid,DSET_NAME,rank,dims,buf, err) IF(err.LT.0) RETURN @@ -185,11 +185,11 @@ SUBROUTINE test_testds(err) RETURN ENDIF CALL write_test_status(err) - + !------------------------------------------------------------------------- ! set the DS_1_NAME dimension scale to DSET_NAME at dimension 0 !------------------------------------------------------------------------- - + CALL test_begin(' Test Setting Dimension Scale ') CALL H5DSset_scale_f(dsid, err, "Dimension Scale Set 1") @@ -245,15 +245,15 @@ SUBROUTINE test_testds(err) CALL write_test_status(err) RETURN ENDIF - + ! close DS id CALL H5Dclose_f(dsid, err) IF(err.LT.0) RETURN - + !------------------------------------------------------------------------- ! attach the DS_2_NAME dimension scale to DSET_NAME !------------------------------------------------------------------------- - + ! get the DS dataset id CALL H5Dopen_f(fid, DS_2_NAME, dsid, err) IF(err.LT.0) RETURN @@ -301,7 +301,7 @@ SUBROUTINE test_testds(err) ENDIF ! Test label where character length is to small - + label_len = 5 label = '' CALL H5DSget_label_f(did, DIM2, label(1:label_len), label_len, err) @@ -341,7 +341,7 @@ SUBROUTINE test_testds(err) CALL H5Dclose_f(dsid, err) IF(err.LT.0) RETURN - ! close file + ! close file CALL H5Fclose_f(fid, err) IF(err.LT.0) RETURN @@ -352,7 +352,7 @@ END MODULE TSTDS_TESTS PROGRAM test_ds USE TSTDS_TESTS ! module for testing dataset routines - + IMPLICIT NONE INTEGER :: err diff --git a/hl/fortran/test/tstlite.F90 b/hl/fortran/test/tstlite.F90 index 673807b..071bd3f 100644 --- a/hl/fortran/test/tstlite.F90 +++ b/hl/fortran/test/tstlite.F90 @@ -635,7 +635,7 @@ CONTAINS DO k = 1, dims(3) IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN PRINT *, 'read buffer differs from write buffer' - PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) + PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) STOP ENDIF END DO @@ -660,7 +660,7 @@ CONTAINS DO k = 1, dims(3) IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN PRINT *, 'read buffer differs from write buffer' - PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) + PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) STOP ENDIF END DO @@ -685,7 +685,7 @@ CONTAINS DO k = 1, dims(3) IF ( dset_data_i32(i,j,k) .NE. data_out_i32(i,j,k) ) THEN PRINT *, 'read buffer differs from write buffer' - PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) + PRINT *, dset_data_i32(i,j,k), ' and ', data_out_i32(i,j,k) STOP ENDIF END DO @@ -1356,7 +1356,7 @@ CONTAINS TYPE(hvl_t), DIMENSION(1:2), TARGET :: rdata ! Pointer to vlen structures INTEGER(hsize_t), DIMENSION(1:1) :: dims_vl = (/2/) INTEGER, DIMENSION(:), POINTER :: ptr_r - INTEGER(HID_T) :: type_id + INTEGER(HID_T) :: type_id ! ! Initialize FORTRAN predefined datatypes. @@ -1911,7 +1911,7 @@ CONTAINS STOP ENDIF - ! + ! ! ** Test reading a string that was created with a C program ** ! @@ -1923,7 +1923,7 @@ CONTAINS !!$ ! !!$ IF ( bufr_c .NE. buf_c ) THEN !!$ PRINT *, 'read buffer differs from write buffer' -!!$ PRINT *, bufr1, ' and ', buf_c +!!$ PRINT *, bufr1, ' and ', buf_c !!$ STOP !!$ ENDIF !!$ ! @@ -1936,9 +1936,9 @@ CONTAINS !!$ ! !!$ IF ( buf_c(1:16) .NE. bufr_c_lg(1:16) .AND. bufr_c_lg(17:18) .NE. ' ' ) THEN !!$ PRINT *, 'larger read buffer differs from write buffer' -!!$ PRINT *, buf_c, ' and ', bufr_c_lg +!!$ PRINT *, buf_c, ' and ', bufr_c_lg !!$ STOP -!!$ ENDIF +!!$ ENDIF !!$ CALL h5fclose_f(file_id1, errcode) diff --git a/hl/fortran/test/tsttable.F90 b/hl/fortran/test/tsttable.F90 index 840d33d..55cdbf0 100644 --- a/hl/fortran/test/tsttable.F90 +++ b/hl/fortran/test/tsttable.F90 @@ -58,7 +58,7 @@ SUBROUTINE test_table1() USE TSTTABLE ! module for testing table support routines IMPLICIT NONE - + CHARACTER(len=8), PARAMETER :: filename = "f1tab.h5" ! File name CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name INTEGER(HID_T) :: file_id ! File identifier @@ -106,7 +106,7 @@ SUBROUTINE test_table1() SIZEOF_X = SIZEOF(bufd(1)) #endif - ! If Fortran DOUBLE PRECISION and C DOUBLE sizeofs don't match then disable + ! If Fortran DOUBLE PRECISION and C DOUBLE sizeofs don't match then disable ! creating a DOUBLE RECISION field, and instead create a REAL field. This ! is needed to handle when DOUBLE PRECISION is promoted via a compiler flag. Exclude_double = .FALSE. @@ -511,7 +511,7 @@ SUBROUTINE test_table1() IF ( maxlen .NE. 8 ) THEN WRITE(*,'(/,5X,"H5TBGET_FIELD_INFO_F: INCORRECT MAXIMUM CHARACTER LENGTH OF THE FIELD NAMES")') - WRITE(*,'(5X,"RETURNED VALUE = ", I0, ", CORRECT VALUE = ", I0)') maxlen, 8 + WRITE(*,'(5X,"RETURNED VALUE = ", I0, ", CORRECT VALUE = ", I0)') maxlen, 8 STOP ENDIF @@ -552,7 +552,7 @@ SUBROUTINE test_table2() USE TSTTABLE ! module for testing table support routines IMPLICIT NONE - + INTEGER, PARAMETER :: i8 = SELECTED_INT_KIND(9) !should map to INTEGER*4 on most modern processors INTEGER, PARAMETER :: i16 = SELECTED_INT_KIND(9) ! (18) !should map to INTEGER*8 on most modern processors INTEGER, PARAMETER :: sp = SELECTED_REAL_KIND(5) ! This should map to REAL*4 on most modern processors @@ -605,7 +605,7 @@ SUBROUTINE test_table2() test_txt = "Testing H5TBread_table_f and H5TBmake_table_f (F2003)" CALL test_begin(test_txt) - + ! Define an array of Particles p_data(1:nrecords) = (/ & particle_t("zero ",0_i8,0_i16,0.0_sp,0.0_dp), & @@ -641,7 +641,7 @@ SUBROUTINE test_table2() /) #endif - dst_offset(1:nfields) = (/ & + dst_offset(1:nfields) = (/ & H5OFFSETOF(C_LOC(dst_buf(1)), C_LOC(dst_buf(1)%name(1:1))), & H5OFFSETOF(C_LOC(dst_buf(1)), C_LOC(dst_buf(1)%lati)), & H5OFFSETOF(C_LOC(dst_buf(1)), C_LOC(dst_buf(1)%long)), & @@ -693,7 +693,7 @@ SUBROUTINE test_table2() f_ptr1 = C_LOC(p_data(1)%name(1:1)) f_ptr2 = C_NULL_PTR - + CALL h5tbmake_table_f("Table Title",file_id, table_name, nfields, nrecords, & dst_size, field_names, dst_offset, field_type, & chunk_size, f_ptr2, compress, f_ptr1, errcode ) diff --git a/hl/src/H5DO.c b/hl/src/H5DO.c index 0fbdab3..66997cb 100644 --- a/hl/src/H5DO.c +++ b/hl/src/H5DO.c @@ -106,7 +106,6 @@ herr_t H5DOappend(hid_t dset_id, hid_t dxpl_id, unsigned axis, size_t extension, hid_t memtype, const void *buf) { - hbool_t created_dxpl = FALSE; /* Whether we created a DXPL */ hsize_t size[H5S_MAX_RANK]; /* The new size (after extension */ hsize_t old_size = 0; /* The size of the dimension to be extended */ int sndims; /* Number of dimensions in dataspace (signed) */ @@ -135,14 +134,10 @@ H5DOappend(hid_t dset_id, hid_t dxpl_id, unsigned axis, size_t extension, if(H5I_DATASET != H5Iget_type(dset_id)) goto done; - /* If the user passed in a default DXPL, create one to pass to H5Dwrite() */ - if(H5P_DEFAULT == dxpl_id) { - if((dxpl_id = H5Pcreate(H5P_DATASET_XFER)) < 0) + /* If the user passed in a default DXPL, sanity check it */ + if(H5P_DEFAULT != dxpl_id) + if(TRUE != H5Pisa_class(dxpl_id, H5P_DATASET_XFER)) goto done; - created_dxpl = TRUE; - } /* end if */ - else if(TRUE != H5Pisa_class(dxpl_id, H5P_DATASET_XFER)) - goto done; /* Get the dataspace of the dataset */ if(FAIL == (space_id = H5Dget_space(dset_id))) @@ -240,12 +235,6 @@ H5DOappend(hid_t dset_id, hid_t dxpl_id, unsigned axis, size_t extension, ret_value = SUCCEED; done: - /* Close dxpl if we created it vs. one was passed in */ - if(created_dxpl) { - if(H5Pclose(dxpl_id) < 0) - ret_value = FAIL; - } /* end if */ - /* Close old dataspace */ if(space_id != FAIL && H5Sclose(space_id) < 0) ret_value = FAIL; @@ -136,14 +136,14 @@ static const H5AC_class_t *const H5AC_class_s[] = { /*------------------------------------------------------------------------- - * Function: H5AC_init + * Function: H5AC_init * - * Purpose: Initialize the interface from some other layer. + * Purpose: Initialize the interface from some other layer. * - * Return: Success: non-negative - * Failure: negative + * Return: Success: non-negative + * Failure: negative * - * Programmer: Quincey Koziol + * Programmer: Quincey Koziol * Saturday, January 18, 2003 * *------------------------------------------------------------------------- @@ -162,13 +162,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5AC__init_package + * Function H5AC__init_package * - * Purpose: Initialize interface-specific information + * Purpose: Initialize interface-specific information * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Quincey Koziol + * Programmer: Quincey Koziol * Thursday, July 18, 2002 * *------------------------------------------------------------------------- @@ -198,15 +198,15 @@ H5AC__init_package(void) /*------------------------------------------------------------------------- - * Function: H5AC_term_package + * Function: H5AC_term_package * - * Purpose: Terminate this interface. + * Purpose: Terminate this interface. * - * Return: Success: Positive if anything was done that might - * affect other interfaces; zero otherwise. - * Failure: Negative. + * Return: Success: Positive if anything was done that might + * affect other interfaces; zero otherwise. + * Failure: Negative. * - * Programmer: Quincey Koziol + * Programmer: Quincey Koziol * Thursday, July 18, 2002 * *------------------------------------------------------------------------- @@ -284,7 +284,7 @@ herr_t H5AC_create(const H5F_t *f, H5AC_cache_config_t *config_ptr, H5AC_cache_image_config_t * image_config_ptr) { #ifdef H5_HAVE_PARALLEL - char prefix[H5C__PREFIX_LEN] = ""; + char prefix[H5C__PREFIX_LEN] = ""; H5AC_aux_t * aux_ptr = NULL; #endif /* H5_HAVE_PARALLEL */ struct H5C_cache_image_ctl_t int_ci_config = H5C__DEFAULT_CACHE_IMAGE_CTL; @@ -309,9 +309,9 @@ H5AC_create(const H5F_t *f, H5AC_cache_config_t *config_ptr, H5AC_cache_image_co #ifdef H5_HAVE_PARALLEL if(H5F_HAS_FEATURE(f, H5FD_FEAT_HAS_MPI)) { - MPI_Comm mpi_comm; - int mpi_rank; - int mpi_size; + MPI_Comm mpi_comm; + int mpi_rank; + int mpi_size; if(MPI_COMM_NULL == (mpi_comm = H5F_mpi_get_comm(f))) HGOTO_ERROR(H5E_VFL, H5E_CANTGET, FAIL, "can't get MPI communicator") @@ -400,7 +400,7 @@ H5AC_create(const H5F_t *f, H5AC_cache_config_t *config_ptr, H5AC_cache_image_co #endif /* H5_HAVE_PARALLEL */ if(NULL == f->shared->cache) - HGOTO_ERROR(H5E_CACHE, H5E_CANTALLOC, FAIL, "memory allocation failed") + HGOTO_ERROR(H5E_CACHE, H5E_CANTALLOC, FAIL, "memory allocation failed") #ifdef H5_HAVE_PARALLEL if(aux_ptr != NULL) @@ -561,12 +561,12 @@ done: * Function: H5AC_evict * * Purpose: Evict all entries except the pinned entries - * in the cache. + * in the cache. * * Return: Non-negative on success/Negative on failure * * Programmer: Vailin Choi - * Dec 2013 + * Dec 2013 * *------------------------------------------------------------------------- */ @@ -600,9 +600,9 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_expunge_entry * - * Purpose: Expunge the target entry from the cache without writing it - * to disk even if it is dirty. The entry must not be either - * pinned or protected. + * Purpose: Expunge the target entry from the cache without writing it + * to disk even if it is dirty. The entry must not be either + * pinned or protected. * * Return: Non-negative on success/Negative on failure * @@ -643,13 +643,13 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_flush * - * Purpose: Flush (and possibly destroy) the metadata cache associated - * with the specified file. + * Purpose: Flush (and possibly destroy) the metadata cache associated + * with the specified file. * - * If the cache contains protected entries, the function will - * fail, as protected entries cannot be flushed. However - * all unprotected entries should be flushed before the - * function returns failure. + * If the cache contains protected entries, the function will + * fail, as protected entries cannot be flushed. However + * all unprotected entries should be flushed before the + * function returns failure. * * Return: Non-negative on success/Negative on failure if there was a * request to flush all items and something was protected. @@ -701,15 +701,15 @@ done: * Function: H5AC_get_entry_status * * Purpose: Given a file address, determine whether the metadata - * cache contains an entry at that location. If it does, - * also determine whether the entry is dirty, protected, - * pinned, etc. and return that information to the caller - * in *status. + * cache contains an entry at that location. If it does, + * also determine whether the entry is dirty, protected, + * pinned, etc. and return that information to the caller + * in *status. * - * If the specified entry doesn't exist, set *status_ptr - * to zero. + * If the specified entry doesn't exist, set *status_ptr + * to zero. * - * On error, the value of *status is undefined. + * On error, the value of *status is undefined. * * Return: Non-negative on success/Negative on failure * @@ -721,14 +721,14 @@ done: herr_t H5AC_get_entry_status(const H5F_t *f, haddr_t addr, unsigned *status) { - hbool_t in_cache; /* Entry @ addr is in the cache */ - hbool_t is_dirty; /* Entry @ addr is in the cache and dirty */ - hbool_t is_protected; /* Entry @ addr is in the cache and protected */ - hbool_t is_pinned; /* Entry @ addr is in the cache and pinned */ - hbool_t is_corked; - hbool_t is_flush_dep_child; /* Entry @ addr is in the cache and is a flush dependency child */ - hbool_t is_flush_dep_parent; /* Entry @ addr is in the cache and is a flush dependency parent */ - hbool_t image_is_up_to_date; /* Entry @ addr is in the cache and has an up to date image */ + hbool_t in_cache; /* Entry @ addr is in the cache */ + hbool_t is_dirty; /* Entry @ addr is in the cache and dirty */ + hbool_t is_protected; /* Entry @ addr is in the cache and protected */ + hbool_t is_pinned; /* Entry @ addr is in the cache and pinned */ + hbool_t is_corked; + hbool_t is_flush_dep_child; /* Entry @ addr is in the cache and is a flush dependency child */ + hbool_t is_flush_dep_parent; /* Entry @ addr is in the cache and is a flush dependency parent */ + hbool_t image_is_up_to_date; /* Entry @ addr is in the cache and has an up to date image */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(FAIL) @@ -741,21 +741,21 @@ H5AC_get_entry_status(const H5F_t *f, haddr_t addr, unsigned *status) HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "H5C_get_entry_status() failed") if(in_cache) { - *status |= H5AC_ES__IN_CACHE; - if(is_dirty) - *status |= H5AC_ES__IS_DIRTY; - if(is_protected) - *status |= H5AC_ES__IS_PROTECTED; - if(is_pinned) - *status |= H5AC_ES__IS_PINNED; - if(is_corked) - *status |= H5AC_ES__IS_CORKED; - if(is_flush_dep_parent) - *status |= H5AC_ES__IS_FLUSH_DEP_PARENT; - if(is_flush_dep_child) - *status |= H5AC_ES__IS_FLUSH_DEP_CHILD; - if(image_is_up_to_date) - *status |= H5AC_ES__IMAGE_IS_UP_TO_DATE; + *status |= H5AC_ES__IN_CACHE; + if(is_dirty) + *status |= H5AC_ES__IS_DIRTY; + if(is_protected) + *status |= H5AC_ES__IS_PROTECTED; + if(is_pinned) + *status |= H5AC_ES__IS_PINNED; + if(is_corked) + *status |= H5AC_ES__IS_CORKED; + if(is_flush_dep_parent) + *status |= H5AC_ES__IS_FLUSH_DEP_PARENT; + if(is_flush_dep_child) + *status |= H5AC_ES__IS_FLUSH_DEP_CHILD; + if(image_is_up_to_date) + *status |= H5AC_ES__IMAGE_IS_UP_TO_DATE; } /* end if */ else *status = 0; @@ -875,8 +875,8 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_mark_entry_dirty * - * Purpose: Mark a pinned or protected entry as dirty. The target - * entry MUST be either pinned, protected, or both. + * Purpose: Mark a pinned or protected entry as dirty. The target + * entry MUST be either pinned, protected, or both. * * Return: Non-negative on success/Negative on failure * @@ -929,8 +929,8 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_mark_entry_clean * - * Purpose: Mark a pinned entry as clean. The target - * entry MUST be pinned. + * Purpose: Mark a pinned entry as clean. The target + * entry MUST be pinned. * * Return: Non-negative on success/Negative on failure * @@ -982,8 +982,8 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_mark_entry_unserialized * - * Purpose: Mark a pinned or protected entry as unserialized. The target - * entry MUST be either pinned, protected, or both. + * Purpose: Mark a pinned or protected entry as unserialized. The target + * entry MUST be either pinned, protected, or both. * * Return: Non-negative on success/Negative on failure * @@ -1024,8 +1024,8 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_mark_entry_serialized * - * Purpose: Mark a pinned entry as serialized. The target - * entry MUST be pinned. + * Purpose: Mark a pinned entry as serialized. The target + * entry MUST be pinned. * * Return: Non-negative on success/Negative on failure * @@ -1124,7 +1124,7 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_pin_protected_entry() * - * Purpose: Pin a protected cache entry. The entry must be protected + * Purpose: Pin a protected cache entry. The entry must be protected * at the time of call, and must be unpinned. * * Return: Non-negative on success/Negative on failure @@ -1205,7 +1205,7 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_create_flush_dependency() * - * Purpose: Create a flush dependency between two entries in the metadata + * Purpose: Create a flush dependency between two entries in the metadata * cache. * * Return: Non-negative on success/Negative on failure @@ -1250,16 +1250,16 @@ done: * Function: H5AC_protect * * Purpose: If the target entry is not in the cache, load it. If - * necessary, attempt to evict one or more entries to keep - * the cache within its maximum size. + * necessary, attempt to evict one or more entries to keep + * the cache within its maximum size. * - * Mark the target entry as protected, and return its address - * to the caller. The caller must call H5AC_unprotect() when - * finished with the entry. + * Mark the target entry as protected, and return its address + * to the caller. The caller must call H5AC_unprotect() when + * finished with the entry. * - * While it is protected, the entry may not be either evicted - * or flushed -- nor may it be accessed by another call to - * H5AC_protect. Any attempt to do so will result in a failure. + * While it is protected, the entry may not be either evicted + * or flushed -- nor may it be accessed by another call to + * H5AC_protect. Any attempt to do so will result in a failure. * * Return: Success: Ptr to the object. * Failure: NULL @@ -1301,7 +1301,7 @@ H5AC_protect(H5F_t *f, const H5AC_class_t *type, haddr_t addr, void *udata, /* Check for invalid access request */ if((0 == (H5F_INTENT(f) & H5F_ACC_RDWR)) && (0 == (flags & H5C__READ_ONLY_FLAG))) - HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, NULL, "no write intent on file") + HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, NULL, "no write intent on file") #if H5AC_DO_TAGGING_SANITY_CHECKS if(!H5C_get_ignore_tags(f->shared->cache) && H5AC__verify_tag(type) < 0) @@ -1331,7 +1331,7 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_resize_entry * - * Purpose: Resize a pinned or protected entry. + * Purpose: Resize a pinned or protected entry. * * Return: Non-negative on success/Negative on failure * @@ -1384,8 +1384,8 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_unpin_entry() * - * Purpose: Unpin a cache entry. The entry must be unprotected at - * the time of call, and must be pinned. + * Purpose: Unpin a cache entry. The entry must be unprotected at + * the time of call, and must be pinned. * * Return: Non-negative on success/Negative on failure * @@ -1427,7 +1427,7 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_destroy_flush_dependency() * - * Purpose: Destroy a flush dependency between two entries. + * Purpose: Destroy a flush dependency between two entries. * * Return: Non-negative on success/Negative on failure * @@ -1470,27 +1470,27 @@ done: /*------------------------------------------------------------------------- * Function: H5AC_unprotect * - * Purpose: Undo an H5AC_protect() call -- specifically, mark the - * entry as unprotected, remove it from the protected list, - * and give it back to the replacement policy. + * Purpose: Undo an H5AC_protect() call -- specifically, mark the + * entry as unprotected, remove it from the protected list, + * and give it back to the replacement policy. * - * The TYPE and ADDR arguments must be the same as those in - * the corresponding call to H5AC_protect() and the THING - * argument must be the value returned by that call to - * H5AC_protect(). + * The TYPE and ADDR arguments must be the same as those in + * the corresponding call to H5AC_protect() and the THING + * argument must be the value returned by that call to + * H5AC_protect(). * - * If the deleted flag is TRUE, simply remove the target entry - * from the cache, clear it, and free it without writing it to - * disk. + * If the deleted flag is TRUE, simply remove the target entry + * from the cache, clear it, and free it without writing it to + * disk. * - * This version of the function is a complete re-write to - * use the new metadata cache. While there isn't all that - * much difference between the old and new Purpose sections, - * the original version is given below. + * This version of the function is a complete re-write to + * use the new metadata cache. While there isn't all that + * much difference between the old and new Purpose sections, + * the original version is given below. * - * Original purpose section: + * Original purpose section: * - * This function should be called to undo the effect of + * This function should be called to undo the effect of * H5AC_protect(). The TYPE and ADDR arguments should be the * same as the corresponding call to H5AC_protect() and the * THING argument should be the value returned by H5AC_protect(). @@ -1509,8 +1509,8 @@ herr_t H5AC_unprotect(H5F_t *f, const H5AC_class_t *type, haddr_t addr, void *thing, unsigned flags) { - hbool_t dirtied; - hbool_t deleted; + hbool_t dirtied; + hbool_t deleted; #ifdef H5_HAVE_PARALLEL H5AC_aux_t * aux_ptr = NULL; #endif /* H5_HAVE_PARALLEL */ @@ -1531,14 +1531,14 @@ H5AC_unprotect(H5F_t *f, const H5AC_class_t *type, haddr_t addr, void *thing, HDassert( ((H5AC_info_t *)thing)->type == type ); dirtied = (hbool_t)(((flags & H5AC__DIRTIED_FLAG) == H5AC__DIRTIED_FLAG) || - (((H5AC_info_t *)thing)->dirtied)); + (((H5AC_info_t *)thing)->dirtied)); deleted = (hbool_t)((flags & H5C__DELETED_FLAG) == H5C__DELETED_FLAG); /* Check if the size changed out from underneath us, if we're not deleting * the entry. */ if(dirtied && !deleted) { - size_t curr_size = 0; + size_t curr_size = 0; if((type->image_len)(thing, &curr_size) < 0) HGOTO_ERROR(H5E_CACHE, H5E_CANTGETSIZE, FAIL, "Can't get size of thing") @@ -1625,7 +1625,7 @@ H5AC_get_cache_auto_resize_config(const H5AC_t *cache_ptr, if(internal_config.rpt_fcn == NULL) config_ptr->rpt_fcn_enabled = FALSE; else - config_ptr->rpt_fcn_enabled = TRUE; + config_ptr->rpt_fcn_enabled = TRUE; config_ptr->open_trace_file = FALSE; config_ptr->close_trace_file = FALSE; config_ptr->trace_file_name[0] = '\0'; @@ -1658,12 +1658,12 @@ H5AC_get_cache_auto_resize_config(const H5AC_t *cache_ptr, if(NULL != (aux_ptr = (H5AC_aux_t *)H5C_get_aux_ptr(cache_ptr))) { config_ptr->dirty_bytes_threshold = aux_ptr->dirty_bytes_threshold; - config_ptr->metadata_write_strategy = aux_ptr->metadata_write_strategy; + config_ptr->metadata_write_strategy = aux_ptr->metadata_write_strategy; } /* end if */ else { #endif /* H5_HAVE_PARALLEL */ config_ptr->dirty_bytes_threshold = H5AC__DEFAULT_DIRTY_BYTES_THRESHOLD; - config_ptr->metadata_write_strategy = H5AC__DEFAULT_METADATA_WRITE_STRATEGY; + config_ptr->metadata_write_strategy = H5AC__DEFAULT_METADATA_WRITE_STRATEGY; #ifdef H5_HAVE_PARALLEL } /* end else */ } @@ -1800,7 +1800,7 @@ herr_t H5AC_set_cache_auto_resize_config(H5AC_t *cache_ptr, H5AC_cache_config_t *config_ptr) { H5C_auto_size_ctl_t internal_config; - herr_t ret_value = SUCCEED; /* Return value */ + herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(FAIL) @@ -1880,16 +1880,16 @@ done: * Function: H5AC_validate_config() * * Purpose: Run a sanity check on the contents of the supplied - * instance of H5AC_cache_config_t. + * instance of H5AC_cache_config_t. * * Do nothing and return SUCCEED if no errors are detected, * and flag an error and return FAIL otherwise. * - * At present, this function operates by packing the data - * from the instance of H5AC_cache_config_t into an instance - * of H5C_auto_size_ctl_t, and then calling - * H5C_validate_resize_config(). As H5AC_cache_config_t and - * H5C_auto_size_ctl_t diverge, we may have to change this. + * At present, this function operates by packing the data + * from the instance of H5AC_cache_config_t into an instance + * of H5C_auto_size_ctl_t, and then calling + * H5C_validate_resize_config(). As H5AC_cache_config_t and + * H5C_auto_size_ctl_t diverge, we may have to change this. * * Return: Non-negative on success/Negative on failure * @@ -1914,7 +1914,7 @@ H5AC_validate_config(H5AC_cache_config_t *config_ptr) /* don't bother to test trace_file_name unless open_trace_file is TRUE */ if(config_ptr->open_trace_file) { - size_t name_len; + size_t name_len; /* Can't really test the trace_file_name field without trying to * open the file, so we will content ourselves with a couple of @@ -1957,17 +1957,17 @@ done: * Function: H5AC_validate_cache_image_config() * * Purpose: Run a sanity check on the contents of the supplied - * instance of H5AC_cache_image_config_t. + * instance of H5AC_cache_image_config_t. * * Do nothing and return SUCCEED if no errors are detected, * and flag an error and return FAIL otherwise. * - * At present, this function operates by packing the data - * from the instance of H5AC_cache_image_config_t into an - * instance of H5C_cache_image_ctl_t, and then calling - * H5C_validate_cache_image_config(). If and when + * At present, this function operates by packing the data + * from the instance of H5AC_cache_image_config_t into an + * instance of H5C_cache_image_ctl_t, and then calling + * H5C_validate_cache_image_config(). If and when * H5AC_cache_image_config_t and H5C_cache_image_ctl_t - * diverge, we may have to change this. + * diverge, we may have to change this. * * Return: Non-negative on success/Negative on failure * @@ -2013,13 +2013,13 @@ done: * Function: H5AC__check_if_write_permitted * * Purpose: Determine if a write is permitted under the current - * circumstances, and set *write_permitted_ptr accordingly. - * As a general rule it is, but when we are running in parallel - * mode with collective I/O, we must ensure that a read cannot - * cause a write. + * circumstances, and set *write_permitted_ptr accordingly. + * As a general rule it is, but when we are running in parallel + * mode with collective I/O, we must ensure that a read cannot + * cause a write. * - * In the event of failure, the value of *write_permitted_ptr - * is undefined. + * In the event of failure, the value of *write_permitted_ptr + * is undefined. * * Return: Non-negative on success/Negative on failure. * @@ -2035,9 +2035,9 @@ H5_ATTR_UNUSED *f, hbool_t *write_permitted_ptr) { #ifdef H5_HAVE_PARALLEL - H5AC_aux_t * aux_ptr = NULL; + H5AC_aux_t * aux_ptr = NULL; #endif /* H5_HAVE_PARALLEL */ - hbool_t write_permitted = TRUE; + hbool_t write_permitted = TRUE; FUNC_ENTER_STATIC_NOERR @@ -2051,9 +2051,9 @@ H5_ATTR_UNUSED HDassert(aux_ptr->magic == H5AC__H5AC_AUX_T_MAGIC); if((aux_ptr->mpi_rank == 0) || (aux_ptr->metadata_write_strategy == H5AC_METADATA_WRITE_STRATEGY__DISTRIBUTED)) - write_permitted = aux_ptr->write_permitted; + write_permitted = aux_ptr->write_permitted; else - write_permitted = FALSE; + write_permitted = FALSE; } /* end if */ #endif /* H5_HAVE_PARALLEL */ @@ -2067,12 +2067,12 @@ H5_ATTR_UNUSED * Function: H5AC__ext_config_2_int_config() * * Purpose: Utility function to translate an instance of - * H5AC_cache_config_t to an instance of H5C_auto_size_ctl_t. + * H5AC_cache_config_t to an instance of H5C_auto_size_ctl_t. * - * Places translation in *int_conf_ptr and returns SUCCEED - * if successful. Returns FAIL on failure. + * Places translation in *int_conf_ptr and returns SUCCEED + * if successful. Returns FAIL on failure. * - * Does only minimal sanity checking. + * Does only minimal sanity checking. * * Return: Non-negative on success/Negative on failure * @@ -2453,7 +2453,7 @@ done: * Purpose: Given a file address, retrieve the ring for an entry at that * address. * - * On error, the value of *ring is not modified. + * On error, the value of *ring is not modified. * * Return: Non-negative on success/Negative on failure * @@ -2531,11 +2531,11 @@ H5AC_set_ring(H5AC_ring_t ring, H5AC_ring_t *orig_ring) * are in the process of a file shutdown, post an error * message, and return FAIL. * - * Note that this function simply passes the call on to - * the metadata cache proper, and returns the result. + * Note that this function simply passes the call on to + * the metadata cache proper, and returns the result. * - * Return: Success: Non-negative - * Failure: Negative + * Return: Success: Non-negative + * Failure: Negative * * Programmer: Quincey Koziol * September 17, 2016 @@ -2608,7 +2608,7 @@ done: * Function: H5AC_remove_entry() * * Purpose: Remove an entry from the cache. Must be not protected, pinned, - * dirty, involved in flush dependencies, etc. + * dirty, involved in flush dependencies, etc. * * Return: Non-negative on success/Negative on failure * @@ -2669,3 +2669,4 @@ H5AC_get_mdc_image_info(H5AC_t *cache_ptr, haddr_t *image_addr, hsize_t *image_l done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_get_mdc_image_info() */ + @@ -33,11 +33,11 @@ /***********/ #include "H5private.h" /* Generic Functions */ #include "H5CXprivate.h" /* API Contexts */ -#include "H5Dprivate.h" /* Datasets */ +#include "H5Dprivate.h" /* Datasets */ #include "H5Eprivate.h" /* Error handling */ #include "H5FLprivate.h" /* Free Lists */ #include "H5Iprivate.h" /* IDs */ -#include "H5Lprivate.h" /* Links */ +#include "H5Lprivate.h" /* Links */ #include "H5MMprivate.h" /* Memory management */ #include "H5Pprivate.h" /* Property lists */ @@ -295,8 +295,8 @@ typedef struct H5CX_t { hbool_t nlinks_valid; /* Whether number of soft / UD links to traverse is valid */ /* Cached DCPL properties */ - hbool_t do_min_dset_ohdr; /* Whether to minimize dataset object header */ - hbool_t do_min_dset_ohdr_valid; /* Whether minimize dataset object header flag is valid */ + hbool_t do_min_dset_ohdr; /* Whether to minimize dataset object header */ + hbool_t do_min_dset_ohdr_valid; /* Whether minimize dataset object header flag is valid */ uint8_t ohdr_flags; /* Object header flags */ hbool_t ohdr_flags_valid; /* Whether the object headers flags are valid */ @@ -581,7 +581,6 @@ H5CX__init_package(void) if(H5P_get(la_plist, H5L_ACS_NLINKS_NAME, &H5CX_def_lapl_cache.nlinks) < 0) HGOTO_ERROR(H5E_CONTEXT, H5E_CANTGET, FAIL, "Can't retrieve number of soft / UD links to traverse") - /* Reset the "default DCPL cache" information */ HDmemset(&H5CX_def_dcpl_cache, 0, sizeof(H5CX_dcpl_cache_t)); @@ -1171,6 +1170,7 @@ H5CX_set_dcpl(hid_t dcpl_id) FUNC_LEAVE_NOAPI_VOID } /* end H5CX_set_dcpl() */ + /*------------------------------------------------------------------------- * Function: H5CX_set_libver_bounds * @@ -2593,6 +2593,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5CX_get_nlinks() */ + /*------------------------------------------------------------------------- * Function: H5CX_get_libver_bounds * @@ -150,9 +150,9 @@ H5Dcreate2(hid_t loc_id, const char *name, hid_t type_id, hid_t space_id, if(NULL == (dset = H5VL_dataset_create(vol_obj, &loc_params, name, lcpl_id, type_id, space_id, dcpl_id, dapl_id, H5P_DATASET_XFER_DEFAULT, H5_REQUEST_NULL))) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, H5I_INVALID_HID, "unable to create dataset") - /* Get an atom for the dataset */ + /* Get an ID for the dataset */ if((ret_value = H5VL_register(H5I_DATASET, dset, vol_obj->connector, TRUE)) < 0) - HGOTO_ERROR(H5E_DATASET, H5E_CANTREGISTER, H5I_INVALID_HID, "unable to atomize dataset handle") + HGOTO_ERROR(H5E_DATASET, H5E_CANTREGISTER, H5I_INVALID_HID, "unable to register dataset") done: if(H5I_INVALID_HID == ret_value) @@ -315,7 +315,7 @@ done: * it. It is illegal to subsequently use that same dataset * ID in calls to other dataset functions. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ @@ -382,7 +382,7 @@ done: * * Purpose: Returns the status of dataspace allocation. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ @@ -719,8 +719,7 @@ done: *------------------------------------------------------------------------- */ herr_t -H5Dvlen_get_buf_size(hid_t dataset_id, hid_t type_id, hid_t space_id, - hsize_t *size) +H5Dvlen_get_buf_size(hid_t dataset_id, hid_t type_id, hid_t space_id, hsize_t *size) { H5VL_object_t *vol_obj; /* Dataset for this operation */ hbool_t supported; /* Whether 'get vlen buf size' operation is supported by VOL connector */ @@ -765,7 +764,7 @@ done: * Purpose: Modifies the dimensions of a dataset. * Can change to a smaller dimension. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success, negative on failure * *------------------------------------------------------------------------- */ @@ -802,7 +801,7 @@ done: * * Purpose: Flushes all buffers associated with a dataset. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success, negative on failure * *------------------------------------------------------------------------- */ @@ -840,7 +839,7 @@ done: * * Purpose: Refreshes all buffers associated with a dataset. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success, negative on failure * *------------------------------------------------------------------------- */ @@ -880,7 +879,7 @@ done: * For virtual: * No conversion * - * Return: SUCCEED/FAIL + * Return: Non-negative on success, negative on failure * * Programmer: Vailin Choi * Feb 2015 @@ -957,7 +956,7 @@ done: * Intended for use with the H5D(O)read_chunk API call so * the caller can construct an appropriate buffer. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success, negative on failure * * Programmer: Matthew Strong (GE Healthcare) * 20 October 2016 diff --git a/src/H5Dchunk.c b/src/H5Dchunk.c index e760f63..5fda3c0 100644 --- a/src/H5Dchunk.c +++ b/src/H5Dchunk.c @@ -216,6 +216,7 @@ typedef struct H5D_chunk_readvv_ud_t { const H5D_t *dset; /* Dataset to operate on */ } H5D_chunk_readvv_ud_t; +/* Typedef for chunk info iterator callback */ typedef struct H5D_chunk_info_iter_ud_t { hsize_t scaled[H5O_LAYOUT_NDIMS]; /* Logical offset of the chunk */ hsize_t ndims; /* Number of dimensions in the dataset */ @@ -433,7 +434,7 @@ H5D__chunk_direct_write(const H5D_t *dset, uint32_t filters, hsize_t *offset, /* Allocate storage */ if(H5D__alloc_storage(&io_info, H5D_ALLOC_WRITE, FALSE, NULL) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to initialize storage") - } /* end if */ + } /* Calculate the index of this chunk */ H5VM_chunk_scaled(dset->shared->ndims, offset, layout->u.chunk.dim, scaled); @@ -3350,7 +3351,7 @@ H5D__chunk_flush_entry(const H5D_t *dset, H5D_rdcc_ent_t *ent, hbool_t reset) H5O_storage_chunk_t *sc = &(dset->shared->layout.storage.u.chunk); herr_t ret_value = SUCCEED; /* Return value */ - FUNC_ENTER_STATIC_TAG(dset->oloc.addr) + FUNC_ENTER_STATIC HDassert(dset); HDassert(dset->shared); @@ -3514,7 +3515,7 @@ done: ((ent->edge_chunk_state & H5D_RDCC_DISABLE_FILTERS) ? NULL : &(dset->shared->dcpl_cache.pline))); - FUNC_LEAVE_NOAPI_TAG(ret_value) + FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__chunk_flush_entry() */ @@ -4349,7 +4350,7 @@ H5D__chunk_allocate(const H5D_io_info_t *io_info, hbool_t full_overwrite, hsize_ const H5O_storage_chunk_t *sc = &(layout->storage.u.chunk); herr_t ret_value = SUCCEED; /* Return value */ - FUNC_ENTER_PACKAGE_TAG(dset->oloc.addr) + FUNC_ENTER_PACKAGE /* Check args */ HDassert(dset && H5D_CHUNKED == layout->type); @@ -4753,7 +4754,7 @@ done: H5MM_free(chunk_info.addr); #endif - FUNC_LEAVE_NOAPI_TAG(ret_value) + FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__chunk_allocate() */ @@ -4852,7 +4853,7 @@ H5D__chunk_update_old_edge_chunks(H5D_t *dset, hsize_t old_dim[]) /* Check if the dataspace expanded enough to cause the old edge chunks * in this dimension to become full */ - if((space_dim[op_dim]/chunk_dim[op_dim]) >= (old_edge_chunk_sc[op_dim] + 1)) + if((space_dim[op_dim]/chunk_dim[op_dim]) >= (old_edge_chunk_sc[op_dim] + 1)) new_full_dim[op_dim] = TRUE; } /* end for */ @@ -7306,9 +7307,9 @@ H5D__get_chunk_info(const H5D_t *dset, const H5S_t H5_ATTR_UNUSED *space, hsize_ idx_info.storage = &dset->shared->layout.storage.u.chunk; /* Set addr & size for when dset is not written or queried chunk is not found */ - if(addr) + if (addr) *addr = HADDR_UNDEF; - if(size) + if (size) *size = 0; /* If the chunk is written, get its info, otherwise, return without error */ @@ -7374,12 +7375,12 @@ H5D__get_chunk_info_by_coord_cb(const H5D_chunk_rec_t *chunk_rec, void *_udata) HDassert(chunk_info); /* Going through the scaled, stop when a mismatch is found */ - for(ii = 0; ii < chunk_info->ndims && !different; ii++) - if(chunk_info->scaled[ii] != chunk_rec->scaled[ii]) + for (ii = 0; ii < chunk_info->ndims && !different; ii++) + if (chunk_info->scaled[ii] != chunk_rec->scaled[ii]) different = TRUE; /* Same scaled coords means the chunk is found, copy the chunk info */ - if(!different) { + if (!different) { chunk_info->nbytes = chunk_rec->nbytes; chunk_info->filter_mask = chunk_rec->filter_mask; chunk_info->chunk_addr = chunk_rec->chunk_addr; @@ -7387,7 +7388,7 @@ H5D__get_chunk_info_by_coord_cb(const H5D_chunk_rec_t *chunk_rec, void *_udata) /* Stop iterating */ ret_value = H5_ITER_STOP; - } /* end if */ + } FUNC_LEAVE_NOAPI(ret_value) } /* H5D__get_chunk_info_by_coord_cb() */ diff --git a/src/H5Dfarray.c b/src/H5Dfarray.c index cbaa52d..4eedf04 100644 --- a/src/H5Dfarray.c +++ b/src/H5Dfarray.c @@ -11,12 +11,12 @@ * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ -/* Programmer: Vailin Choi <vchoi@hdfgroup.org> - * Thursday, April 30, 2009 +/* Programmer: Vailin Choi + * Thursday, April 30, 2009 * - * Purpose: Fixed array indexed (chunked) I/O functions. - * The chunk coordinate is mapped as an index into an array of - * disk addresses for the chunks. + * Purpose: Fixed array indexed (chunked) I/O functions. + * The chunk coordinate is mapped as an index into an array of + * disk addresses for the chunks. * */ @@ -30,13 +30,13 @@ /***********/ /* Headers */ /***********/ -#include "H5private.h" /* Generic Functions */ -#include "H5Dpkg.h" /* Datasets */ -#include "H5Eprivate.h" /* Error handling */ -#include "H5FAprivate.h" /* Fixed arrays */ -#include "H5FLprivate.h" /* Free Lists */ -#include "H5MFprivate.h" /* File space management */ -#include "H5VMprivate.h" /* Vector functions */ +#include "H5private.h" /* Generic Functions */ +#include "H5Dpkg.h" /* Datasets */ +#include "H5Eprivate.h" /* Error handling */ +#include "H5FAprivate.h" /* Fixed arrays */ +#include "H5FLprivate.h" /* Free Lists */ +#include "H5MFprivate.h" /* File space management */ +#include "H5VMprivate.h" /* Vector functions */ /****************/ @@ -212,14 +212,14 @@ H5FL_DEFINE_STATIC(H5D_farray_ctx_ud_t); /*------------------------------------------------------------------------- - * Function: H5D__farray_crt_context + * Function: H5D__farray_crt_context * - * Purpose: Create context for callbacks + * Purpose: Create context for callbacks * - * Return: Success: non-NULL - * Failure: NULL + * Return: Success: non-NULL + * Failure: NULL * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -534,7 +534,7 @@ done: static herr_t H5D__farray_dst_dbg_context(void *_dbg_ctx) { - H5D_farray_ctx_ud_t *dbg_ctx = (H5D_farray_ctx_ud_t *)_dbg_ctx; /* Context for fixed array callback */ + H5D_farray_ctx_ud_t *dbg_ctx = (H5D_farray_ctx_ud_t *)_dbg_ctx; /* Context for fixed array callback */ FUNC_ENTER_STATIC_NOERR @@ -612,7 +612,7 @@ H5D__farray_filt_encode(void *_raw, const void *_elmt, size_t nelmts, void *_ctx /* Encode element */ /* (advances 'raw' pointer) */ H5F_addr_encode_len(ctx->file_addr_len, &raw, elmt->addr); - UINT64ENCODE_VAR(raw, elmt->nbytes, ctx->chunk_size_len); + UINT64ENCODE_VAR(raw, elmt->nbytes, ctx->chunk_size_len); UINT32ENCODE(raw, elmt->filter_mask); /* Advance native element pointer */ @@ -658,7 +658,7 @@ H5D__farray_filt_decode(const void *_raw, void *_elmt, size_t nelmts, void *_ctx /* Decode element */ /* (advances 'raw' pointer) */ H5F_addr_decode_len(ctx->file_addr_len, &raw, &elmt->addr); - UINT64DECODE_VAR(raw, elmt->nbytes, ctx->chunk_size_len); + UINT64DECODE_VAR(raw, elmt->nbytes, ctx->chunk_size_len); UINT32DECODE(raw, elmt->filter_mask); /* Advance native element pointer */ @@ -836,7 +836,7 @@ H5D__farray_idx_open(const H5D_chk_idx_info_t *idx_info) /* Open the fixed array for the chunk index */ if(NULL == (idx_info->storage->u.farray.fa = H5FA_open(idx_info->f, idx_info->storage->idx_addr, &udata))) - HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't open fixed array") + HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't open fixed array") /* Check for SWMR writes to the file */ if(H5F_INTENT(idx_info->f) & H5F_ACC_SWMR_WRITE) @@ -887,7 +887,7 @@ H5D__farray_idx_create(const H5D_chk_idx_info_t *idx_info) /* General parameters */ if(idx_info->pline->nused > 0) { - unsigned chunk_size_len; /* Size of encoded chunk size */ + unsigned chunk_size_len; /* Size of encoded chunk size */ /* Compute the size required for encoding the size of a chunk, allowing * for an extra byte, in case the filter makes the chunk larger. @@ -913,11 +913,11 @@ H5D__farray_idx_create(const H5D_chk_idx_info_t *idx_info) /* Create the fixed array for the chunk index */ if(NULL == (idx_info->storage->u.farray.fa = H5FA_create(idx_info->f, &cparam, &udata))) - HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't create fixed array") + HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't create fixed array") /* Get the address of the fixed array in file */ if(H5FA_get_addr(idx_info->storage->u.farray.fa, &(idx_info->storage->idx_addr)) < 0) - HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't query fixed array address") + HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't query fixed array address") /* Check for SWMR writes to the file */ if(H5F_INTENT(idx_info->f) & H5F_ACC_SWMR_WRITE) @@ -988,7 +988,7 @@ H5D__farray_idx_insert(const H5D_chk_idx_info_t *idx_info, H5D_chunk_ud_t *udata if(H5D__farray_idx_open(idx_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPENOBJ, FAIL, "can't open fixed array") } else /* Patch the top level file pointer contained in fa if needed */ - H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f); + H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f); /* Set convenience pointer to fixed array structure */ fa = idx_info->storage->u.farray.fa; @@ -1002,13 +1002,13 @@ H5D__farray_idx_insert(const H5D_chk_idx_info_t *idx_info, H5D_chunk_ud_t *udata if(idx_info->pline->nused > 0) { H5D_farray_filt_elmt_t elmt; /* Fixed array element */ - elmt.addr = udata->chunk_block.offset; + elmt.addr = udata->chunk_block.offset; H5_CHECKED_ASSIGN(elmt.nbytes, uint32_t, udata->chunk_block.length, hsize_t); elmt.filter_mask = udata->filter_mask; /* Set the info for the chunk */ if(H5FA_set(fa, udata->chunk_idx, &elmt) < 0) - HGOTO_ERROR(H5E_DATASET, H5E_CANTSET, FAIL, "can't set chunk info") + HGOTO_ERROR(H5E_DATASET, H5E_CANTSET, FAIL, "can't set chunk info") } /* end if */ else { /* Set the address for the chunk */ @@ -1022,15 +1022,15 @@ done: /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_get_addr + * Function: H5D__farray_idx_get_addr * - * Purpose: Get the file address of a chunk if file space has been - * assigned. Save the retrieved information in the udata - * supplied. + * Purpose: Get the file address of a chunk if file space has been + * assigned. Save the retrieved information in the udata + * supplied. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1038,9 +1038,9 @@ done: static herr_t H5D__farray_idx_get_addr(const H5D_chk_idx_info_t *idx_info, H5D_chunk_ud_t *udata) { - H5FA_t *fa; /* Pointer to fixed array structure */ - hsize_t idx; /* Array index of chunk */ - herr_t ret_value = SUCCEED; /* Return value */ + H5FA_t *fa; /* Pointer to fixed array structure */ + hsize_t idx; /* Array index of chunk */ + herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC @@ -1059,7 +1059,7 @@ H5D__farray_idx_get_addr(const H5D_chk_idx_info_t *idx_info, H5D_chunk_ud_t *uda if(H5D__farray_idx_open(idx_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPENOBJ, FAIL, "can't open fixed array") } else /* Patch the top level file pointer contained in fa if needed */ - H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f); + H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f); /* Set convenience pointer to fixed array structure */ fa = idx_info->storage->u.farray.fa; @@ -1088,12 +1088,12 @@ H5D__farray_idx_get_addr(const H5D_chk_idx_info_t *idx_info, H5D_chunk_ud_t *uda HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't get chunk address") /* Update the other (constant) information for the chunk */ - udata->chunk_block.length = idx_info->layout->size; + udata->chunk_block.length = idx_info->layout->size; udata->filter_mask = 0; } /* end else */ if(!H5F_addr_defined(udata->chunk_block.offset)) - udata->chunk_block.length = 0; + udata->chunk_block.length = 0; done: FUNC_LEAVE_NOAPI(ret_value) @@ -1101,13 +1101,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_iterate_cb + * Function: H5D__farray_idx_iterate_cb * - * Purpose: Callback routine for fixed array element iteration. + * Purpose: Callback routine for fixed array element iteration. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1135,8 +1135,8 @@ H5D__farray_idx_iterate_cb(hsize_t H5_ATTR_UNUSED idx, const void *_elmt, void * /* Make "generic chunk" callback */ if(H5F_addr_defined(udata->chunk_rec.chunk_addr)) - if((ret_value = (udata->cb)(&udata->chunk_rec, udata->udata)) < 0) - HERROR(H5E_DATASET, H5E_CALLBACK, "failure in generic chunk iterator callback"); + if((ret_value = (udata->cb)(&udata->chunk_rec, udata->udata)) < 0) + HERROR(H5E_DATASET, H5E_CALLBACK, "failure in generic chunk iterator callback"); /* Update coordinates of chunk in dataset */ ndims = udata->common.layout->ndims - 1; @@ -1161,14 +1161,14 @@ H5D__farray_idx_iterate_cb(hsize_t H5_ATTR_UNUSED idx, const void *_elmt, void * /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_iterate + * Function: H5D__farray_idx_iterate * - * Purpose: Iterate over the chunks in an index, making a callback + * Purpose: Iterate over the chunks in an index, making a callback * for each one. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1199,35 +1199,35 @@ H5D__farray_idx_iterate(const H5D_chk_idx_info_t *idx_info, if(H5D__farray_idx_open(idx_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPENOBJ, FAIL, "can't open fixed array") } else /* Patch the top level file pointer contained in fa if needed */ - H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f); + H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f); /* Set convenience pointer to fixed array structure */ fa = idx_info->storage->u.farray.fa; /* Get the fixed array statistics */ if(H5FA_get_stats(fa, &fa_stat) < 0) - HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't query fixed array statistics") + HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't query fixed array statistics") /* Check if there are any array elements */ if(fa_stat.nelmts > 0) { H5D_farray_it_ud_t udata; /* User data for iteration callback */ - /* Initialize userdata */ - HDmemset(&udata, 0, sizeof udata); - udata.common.layout = idx_info->layout; - udata.common.storage = idx_info->storage; + /* Initialize userdata */ + HDmemset(&udata, 0, sizeof udata); + udata.common.layout = idx_info->layout; + udata.common.storage = idx_info->storage; HDmemset(&udata.chunk_rec, 0, sizeof(udata.chunk_rec)); udata.filtered = (idx_info->pline->nused > 0); if(!udata.filtered) { udata.chunk_rec.nbytes = idx_info->layout->size; udata.chunk_rec.filter_mask = 0; } /* end if */ - udata.cb = chunk_cb; - udata.udata = chunk_udata; + udata.cb = chunk_cb; + udata.udata = chunk_udata; /* Iterate over the fixed array elements */ - if((ret_value = H5FA_iterate(fa, H5D__farray_idx_iterate_cb, &udata)) < 0) - HERROR(H5E_DATASET, H5E_BADITER, "unable to iterate over fixed array chunk index"); + if((ret_value = H5FA_iterate(fa, H5D__farray_idx_iterate_cb, &udata)) < 0) + HERROR(H5E_DATASET, H5E_BADITER, "unable to iterate over fixed array chunk index"); } /* end if */ done: @@ -1236,13 +1236,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_remove + * Function: H5D__farray_idx_remove * - * Purpose: Remove chunk from index. + * Purpose: Remove chunk from index. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1250,9 +1250,9 @@ done: static herr_t H5D__farray_idx_remove(const H5D_chk_idx_info_t *idx_info, H5D_chunk_common_ud_t *udata) { - H5FA_t *fa; /* Pointer to fixed array structure */ - hsize_t idx; /* Array index of chunk */ - herr_t ret_value = SUCCEED; /* Return value */ + H5FA_t *fa; /* Pointer to fixed array structure */ + hsize_t idx; /* Array index of chunk */ + herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC @@ -1271,7 +1271,7 @@ H5D__farray_idx_remove(const H5D_chk_idx_info_t *idx_info, H5D_chunk_common_ud_t if(H5D__farray_idx_open(idx_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPENOBJ, FAIL, "can't open fixed array") } else /* Patch the top level file pointer contained in fa if needed */ - if(H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f) < 0) + if(H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPENOBJ, FAIL, "can't patch fixed array file pointer") /* Set convenience pointer to fixed array structure */ @@ -1330,14 +1330,14 @@ done: /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_delete_cb + * Function: H5D__farray_idx_delete_cb * - * Purpose: Delete space for chunk in file + * Purpose: Delete space for chunk in file * - * Return: Success: Non-negative - * Failure: negative + * Return: Success: Non-negative + * Failure: negative * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1367,15 +1367,15 @@ done: /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_delete + * Function: H5D__farray_idx_delete * - * Purpose: Delete index and raw data storage for entire dataset + * Purpose: Delete index and raw data storage for entire dataset * (i.e. all chunks) * - * Return: Success: Non-negative - * Failure: negative + * Return: Success: Non-negative + * Failure: negative * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1398,7 +1398,7 @@ H5D__farray_idx_delete(const H5D_chk_idx_info_t *idx_info) if(H5F_addr_defined(idx_info->storage->idx_addr)) { H5D_farray_ctx_ud_t ctx_udata; /* User data for fixed array open call */ - /* Iterate over the chunk addresses in the fixed array, deleting each chunk */ + /* Iterate over the chunk addresses in the fixed array, deleting each chunk */ if(H5D__farray_idx_iterate(idx_info, H5D__farray_idx_delete_cb, idx_info->f) < 0) HGOTO_ERROR(H5E_DATASET, H5E_BADITER, FAIL, "unable to iterate over chunk addresses") @@ -1425,13 +1425,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_copy_setup + * Function: H5D__farray_idx_copy_setup * - * Purpose: Set up any necessary information for copying chunks + * Purpose: Set up any necessary information for copying chunks * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1480,13 +1480,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_copy_shutdown + * Function: H5D__farray_idx_copy_shutdown * - * Purpose: Shutdown any information from copying chunks + * Purpose: Shutdown any information from copying chunks * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1526,7 +1526,7 @@ done: * Return: Success: Non-negative * Failure: negative * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1558,7 +1558,7 @@ H5D__farray_idx_size(const H5D_chk_idx_info_t *idx_info, hsize_t *index_size) /* Get the fixed array statistics */ if(H5FA_get_stats(fa, &fa_stat) < 0) - HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't query fixed array statistics") + HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't query fixed array statistics") *index_size = fa_stat.hdr_size; *index_size += fa_stat.dblk_size; @@ -1575,13 +1575,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_reset + * Function: H5D__farray_idx_reset * - * Purpose: Reset indexing information. + * Purpose: Reset indexing information. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1596,7 +1596,7 @@ H5D__farray_idx_reset(H5O_storage_chunk_t *storage, hbool_t reset_addr) /* Reset index info */ if(reset_addr) - storage->idx_addr = HADDR_UNDEF; + storage->idx_addr = HADDR_UNDEF; storage->u.farray.fa = NULL; FUNC_LEAVE_NOAPI(SUCCEED) @@ -1604,13 +1604,13 @@ H5D__farray_idx_reset(H5O_storage_chunk_t *storage, hbool_t reset_addr) /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_dump + * Function: H5D__farray_idx_dump * - * Purpose: Dump indexing information to a stream. + * Purpose: Dump indexing information to a stream. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1631,13 +1631,13 @@ H5D__farray_idx_dump(const H5O_storage_chunk_t *storage, FILE *stream) /*------------------------------------------------------------------------- - * Function: H5D__farray_idx_dest + * Function: H5D__farray_idx_dest * - * Purpose: Release indexing information in memory. + * Purpose: Release indexing information in memory. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Vailin Choi + * Programmer: Vailin Choi * Thursday, April 30, 2009 * *------------------------------------------------------------------------- @@ -1657,8 +1657,8 @@ H5D__farray_idx_dest(const H5D_chk_idx_info_t *idx_info) /* Check if the fixed array is open */ if(idx_info->storage->u.farray.fa) { - /* Patch the top level file pointer contained in fa if needed */ - if(H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f) < 0) + /* Patch the top level file pointer contained in fa if needed */ + if(H5FA_patch_file(idx_info->storage->u.farray.fa, idx_info->f) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPENOBJ, FAIL, "can't patch fixed array file pointer") /* Close fixed array */ diff --git a/src/H5Dint.c b/src/H5Dint.c index 574bc0d..c063bb9 100644 --- a/src/H5Dint.c +++ b/src/H5Dint.c @@ -78,7 +78,7 @@ typedef struct { /********************/ /* General stuff */ -static H5D_shared_t *H5D__new(hid_t dcpl_id, hid_t dapl, hbool_t creating, hbool_t vl_type); +static H5D_shared_t *H5D__new(hid_t dcpl_id, hid_t dapl_id, hbool_t creating, hbool_t vl_type); static herr_t H5D__init_type(H5F_t *file, const H5D_t *dset, hid_t type_id, const H5T_t *type); static herr_t H5D__cache_dataspace_info(const H5D_t *dset); static herr_t H5D__init_space(H5F_t *file, const H5D_t *dset, const H5S_t *space); @@ -743,7 +743,7 @@ H5D__use_minimized_dset_headers(H5F_t *file, hbool_t *minimize) { herr_t ret_value = SUCCEED; - FUNC_ENTER_NOAPI_NOINIT; + FUNC_ENTER_STATIC HDassert(file); HDassert(minimize); @@ -784,7 +784,7 @@ H5D__calculate_minimum_header_size(H5F_t *file, H5D_t *dset, H5O_t *ohdr) size_t get_value = 0; size_t ret_value = 0; - FUNC_ENTER_NOAPI_NOINIT; + FUNC_ENTER_STATIC HDassert(file); HDassert(dset); @@ -902,7 +902,7 @@ H5D__prepare_minimized_oh(H5F_t *file, H5D_t *dset, H5O_loc_t *oloc) size_t ohdr_size = 0; herr_t ret_value = SUCCEED; - FUNC_ENTER_NOAPI_NOINIT; + FUNC_ENTER_STATIC HDassert(file); HDassert(dset); @@ -947,7 +947,7 @@ H5D__update_oh_info(H5F_t *file, H5D_t *dset, hid_t dapl_id) hbool_t fill_changed = FALSE; /* Flag indicating the fill value was changed */ hbool_t layout_init = FALSE; /* Flag to indicate that chunk information was initialized */ hbool_t use_at_least_v18; /* Flag indicating to use at least v18 format versions */ - hbool_t minimize_header = FALSE; + hbool_t use_minimized_header = FALSE; /* Flag to use minimized dataset object headers */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC @@ -1016,10 +1016,10 @@ H5D__update_oh_info(H5F_t *file, H5D_t *dset, hid_t dapl_id) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set fill value info") } /* end if */ - if(H5D__use_minimized_dset_headers(file, &minimize_header) == FAIL) + if(H5D__use_minimized_dset_headers(file, &use_minimized_header) == FAIL) HGOTO_ERROR(H5E_ARGS, H5E_CANTGET, FAIL, "can't get minimize settings") - if(TRUE == minimize_header) { + if(TRUE == use_minimized_header) { if(H5D__prepare_minimized_oh(file, dset, oloc) == FAIL) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't create minimized dataset object header") } else { @@ -1032,7 +1032,7 @@ H5D__update_oh_info(H5F_t *file, H5D_t *dset, hid_t dapl_id) /* Create an object header for the dataset */ if(H5O_create(file, ohdr_size, (size_t)1, dset->shared->dcpl_id, oloc/*out*/) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to create dataset object header") - } /* If use minimum/standard object header space */ + } /* if using default/minimized object headers */ HDassert(file == dset->oloc.file); @@ -1165,17 +1165,19 @@ H5D__build_file_prefix(const H5D_t *dset, H5F_prefix_open_t prefix_type, char ** if(H5F_PREFIX_VDS == prefix_type) { prefix = H5D_prefix_vds_env; - if(prefix == NULL || *prefix == '\0') + if(prefix == NULL || *prefix == '\0') { if(H5CX_get_vds_prefix(&prefix) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't get the prefix for vds file") - } /* end if */ + } + } else if(H5F_PREFIX_EFILE == prefix_type) { prefix = H5D_prefix_ext_env; - if(prefix == NULL || *prefix == '\0') + if(prefix == NULL || *prefix == '\0') { if(H5CX_get_ext_file_prefix(&prefix) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't get the prefix for the external file") - } /* end else-if */ + } + } else HGOTO_ERROR(H5E_DATASET, H5E_BADTYPE, FAIL, "prefix name is not sensible") @@ -1281,6 +1283,7 @@ H5D__create(H5F_t *file, hid_t type_id, const H5S_t *space, hid_t dcpl_id, /* Initialize the shared dataset space */ if(NULL == (new_dset->shared = H5D__new(dcpl_id, dapl_id, TRUE, has_vl_type))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") + /* Copy & initialize datatype for dataset */ if(H5D__init_type(file, new_dset, type_id, type) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, NULL, "can't copy datatype") @@ -2033,7 +2036,7 @@ H5D_close(H5D_t *dataset) if(H5AC_cork(dataset->oloc.file, dataset->oloc.addr, H5AC__UNCORK, NULL) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTUNCORK, FAIL, "unable to uncork an object") - /* Release datatype, dataspace and creation and access property lists -- there isn't + /* Release datatype, dataspace, and creation and access property lists -- there isn't * much we can do if one of these fails, so we just continue. */ free_failed |= (H5I_dec_ref(dataset->shared->type_id) < 0) || diff --git a/src/H5Dnone.c b/src/H5Dnone.c index 5ba3f5b..40ddcb8 100644 --- a/src/H5Dnone.c +++ b/src/H5Dnone.c @@ -267,31 +267,31 @@ H5D__none_idx_iterate(const H5D_chk_idx_info_t *idx_info, /* Iterate over all the chunks in the dataset's dataspace */ for(u = 0; u < idx_info->layout->nchunks && ret_value == H5_ITER_CONT; u++) { - /* Calculate the index of this chunk */ - idx = H5VM_array_offset_pre(ndims, idx_info->layout->max_down_chunks, chunk_rec.scaled); + /* Calculate the index of this chunk */ + idx = H5VM_array_offset_pre(ndims, idx_info->layout->max_down_chunks, chunk_rec.scaled); - /* Calculate the address of the chunk */ - chunk_rec.chunk_addr = idx_info->storage->idx_addr + idx * idx_info->layout->size; + /* Calculate the address of the chunk */ + chunk_rec.chunk_addr = idx_info->storage->idx_addr + idx * idx_info->layout->size; - /* Make "generic chunk" callback */ - if((ret_value = (*chunk_cb)(&chunk_rec, chunk_udata)) < 0) + /* Make "generic chunk" callback */ + if((ret_value = (*chunk_cb)(&chunk_rec, chunk_udata)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CALLBACK, H5_ITER_ERROR, "failure in generic chunk iterator callback") - /* Update coordinates of chunk in dataset */ - curr_dim = (int)(ndims - 1); - while(curr_dim >= 0) { - /* Increment coordinate in current dimension */ - chunk_rec.scaled[curr_dim]++; - - /* Check if we went off the end of the current dimension */ - if(chunk_rec.scaled[curr_dim] >= idx_info->layout->chunks[curr_dim]) { - /* Reset coordinate & move to next faster dimension */ - chunk_rec.scaled[curr_dim] = 0; - curr_dim--; - } /* end if */ - else - break; - } /* end while */ + /* Update coordinates of chunk in dataset */ + curr_dim = (int)(ndims - 1); + while(curr_dim >= 0) { + /* Increment coordinate in current dimension */ + chunk_rec.scaled[curr_dim]++; + + /* Check if we went off the end of the current dimension */ + if(chunk_rec.scaled[curr_dim] >= idx_info->layout->chunks[curr_dim]) { + /* Reset coordinate & move to next faster dimension */ + chunk_rec.scaled[curr_dim] = 0; + curr_dim--; + } /* end if */ + else + break; + } /* end while */ } /* end for */ done: diff --git a/src/H5Dselect.c b/src/H5Dselect.c index a843d93..c5469c2 100644 --- a/src/H5Dselect.c +++ b/src/H5Dselect.c @@ -113,51 +113,38 @@ H5D__select_io(const H5D_io_info_t *io_info, size_t elmt_size, HDassert(io_info->store); HDassert(io_info->u.rbuf); - /* Get info from API context */ - if(H5CX_get_vec_size(&dxpl_vec_size) < 0) - HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't retrieve I/O vector size") - - /* Allocate the vector I/O arrays */ - if(dxpl_vec_size > H5D_IO_VECTOR_SIZE) - vec_size = dxpl_vec_size; - else - vec_size = H5D_IO_VECTOR_SIZE; - if(NULL == (mem_len = H5FL_SEQ_MALLOC(size_t, vec_size))) - HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate I/O length vector array") - if(NULL == (mem_off = H5FL_SEQ_MALLOC(hsize_t, vec_size))) - HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate I/O offset vector array") - if(NULL == (file_len = H5FL_SEQ_MALLOC(size_t, vec_size))) - HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate I/O length vector array") - if(NULL == (file_off = H5FL_SEQ_MALLOC(hsize_t, vec_size))) - HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate I/O offset vector array") - /* Check for only one element in selection */ if(nelmts == 1) { + hsize_t single_mem_off; /* Offset in memory */ + hsize_t single_file_off; /* Offset in the file */ + size_t single_mem_len; /* Length in memory */ + size_t single_file_len; /* Length in the file */ + /* Get offset of first element in selections */ - if(H5S_SELECT_OFFSET(file_space, file_off) < 0) + if(H5S_SELECT_OFFSET(file_space, &single_file_off) < 0) HGOTO_ERROR(H5E_INTERNAL, H5E_UNSUPPORTED, FAIL, "can't retrieve file selection offset") - if(H5S_SELECT_OFFSET(mem_space, mem_off) < 0) + if(H5S_SELECT_OFFSET(mem_space, &single_mem_off) < 0) HGOTO_ERROR(H5E_INTERNAL, H5E_UNSUPPORTED, FAIL, "can't retrieve memory selection offset") /* Set up necessary information for I/O operation */ file_nseq = mem_nseq = 1; curr_mem_seq = curr_file_seq = 0; - *file_off *= elmt_size; - *mem_off *= elmt_size; - *file_len = *mem_len = elmt_size; + single_file_off *= elmt_size; + single_mem_off *= elmt_size; + single_file_len = single_mem_len = elmt_size; /* Perform I/O on memory and file sequences */ if(io_info->op_type == H5D_IO_OP_READ) { if((tmp_file_len = (*io_info->layout_ops.readvv)(io_info, - file_nseq, &curr_file_seq, file_len, file_off, - mem_nseq, &curr_mem_seq, mem_len, mem_off)) < 0) + file_nseq, &curr_file_seq, &single_file_len, &single_file_off, + mem_nseq, &curr_mem_seq, &single_mem_len, &single_mem_off)) < 0) HGOTO_ERROR(H5E_DATASPACE, H5E_READERROR, FAIL, "read error") } /* end if */ else { HDassert(io_info->op_type == H5D_IO_OP_WRITE); if((tmp_file_len = (*io_info->layout_ops.writevv)(io_info, - file_nseq, &curr_file_seq, file_len, file_off, - mem_nseq, &curr_mem_seq, mem_len, mem_off)) < 0) + file_nseq, &curr_file_seq, &single_file_len, &single_file_off, + mem_nseq, &curr_mem_seq, &single_mem_len, &single_mem_off)) < 0) HGOTO_ERROR(H5E_DATASPACE, H5E_WRITEERROR, FAIL, "write error") } /* end else */ @@ -168,6 +155,24 @@ H5D__select_io(const H5D_io_info_t *io_info, size_t elmt_size, size_t mem_nelem; /* Number of elements used in memory sequences */ size_t file_nelem; /* Number of elements used in file sequences */ + /* Get info from API context */ + if(H5CX_get_vec_size(&dxpl_vec_size) < 0) + HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't retrieve I/O vector size") + + /* Allocate the vector I/O arrays */ + if(dxpl_vec_size > H5D_IO_VECTOR_SIZE) + vec_size = dxpl_vec_size; + else + vec_size = H5D_IO_VECTOR_SIZE; + if(NULL == (mem_len = H5FL_SEQ_MALLOC(size_t, vec_size))) + HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate I/O length vector array") + if(NULL == (mem_off = H5FL_SEQ_MALLOC(hsize_t, vec_size))) + HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate I/O offset vector array") + if(NULL == (file_len = H5FL_SEQ_MALLOC(size_t, vec_size))) + HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate I/O length vector array") + if(NULL == (file_off = H5FL_SEQ_MALLOC(hsize_t, vec_size))) + HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate I/O offset vector array") + /* Allocate the iterators */ if(NULL == (mem_iter = H5FL_MALLOC(H5S_sel_iter_t))) HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "can't allocate memory iterator") diff --git a/src/H5Dvirtual.c b/src/H5Dvirtual.c index 877aadb..e07f538 100644 --- a/src/H5Dvirtual.c +++ b/src/H5Dvirtual.c @@ -1120,7 +1120,7 @@ H5D__virtual_str_append(const char *src, size_t src_len, char **p, char **buf, /* Copy string to *p. Note that since src in not NULL terminated, we must * use memcpy */ - (void)H5MM_memcpy(*p, src, src_len); + H5MM_memcpy(*p, src, src_len); /* Advance *p */ *p += src_len; @@ -991,11 +991,6 @@ END_FUNC(PRIV) /* end H5EA_delete() */ * * Programmer: Vailin Choi; Feb 2015 * - * Modification: - * Prototype changed (HDFFV-10661) - * - herr_t to int - * - SUCCEED/FAIL to H5_ITER_CONT/H5_ITER_ERROR - * June 6, 2019 -BMR *------------------------------------------------------------------------- */ BEGIN_FUNC(PRIV, ERR, @@ -1007,9 +1002,7 @@ H5EA_iterate(H5EA_t *ea, H5EA_operator_t op, void *udata)) hsize_t u; int cb_ret = H5_ITER_CONT; /* Return value from callback */ - /* - * Check arguments. - */ + /* Check arguments */ HDassert(ea); HDassert(op); HDassert(udata); @@ -280,7 +280,7 @@ H5Fget_create_plist(hid_t file_id) /* Retrieve the file creation property list */ if(H5VL_file_get(vol_obj, H5VL_FILE_GET_FCPL, H5P_DATASET_XFER_DEFAULT, H5_REQUEST_NULL, &ret_value) < 0) - HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, H5I_INVALID_HID, "unable to retrieve file creation properties") + HGOTO_ERROR(H5E_FILE, H5E_CANTCOPY, H5I_INVALID_HID, "unable to retrieve file creation properties") done: FUNC_LEAVE_API(ret_value) @@ -320,7 +320,7 @@ H5Fget_access_plist(hid_t file_id) /* Retrieve the file's access property list */ if(H5VL_file_get(vol_obj, H5VL_FILE_GET_FAPL, H5P_DATASET_XFER_DEFAULT, H5_REQUEST_NULL, &ret_value) < 0) - HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, H5I_INVALID_HID, "can't get file access property list") + HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID, "can't get file access property list") done: FUNC_LEAVE_API(ret_value) @@ -584,8 +584,8 @@ done: * * Purpose: Check if the file can be opened with the given fapl. * - * Return: Succeed: TRUE/FALSE - * Failure: FAIL (includes file does not exist) + * Return: Success: TRUE/FALSE + * Failure: -1 (includes file does not exist) * *------------------------------------------------------------------------- */ @@ -820,8 +820,7 @@ done: * not remove them from the cache. The OBJECT_ID can be a file, * dataset, group, attribute, or named data type. * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ herr_t @@ -863,8 +862,8 @@ done: * closed until those objects are closed; however, all data for * the file and the open objects is flushed. * - * Return: SUCCEED/FAIL - * + * Return: Success: Non-negative + * Failure: Negative *------------------------------------------------------------------------- */ herr_t @@ -879,11 +878,9 @@ H5Fclose(hid_t file_id) if(H5I_FILE != H5I_get_type(file_id)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file ID") - /* Decrement reference count on atom. When it reaches zero the file will - * be closed. - */ + /* Close the file */ if(H5I_dec_app_ref(file_id) < 0) - HGOTO_ERROR(H5E_ATOM, H5E_CANTCLOSEFILE, FAIL, "decrementing file ID failed") + HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "closing file ID failed") done: FUNC_LEAVE_API(ret_value) @@ -1011,8 +1008,7 @@ done: * Purpose: Public API to retrieve the file's 'intent' flags passed * during H5Fopen() * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/negative on failure *------------------------------------------------------------------------- */ herr_t @@ -1117,8 +1113,8 @@ done: * is called after an existing file is opened in order * to learn the true size of the underlying file. * - * Return: SUCCEED/FAIL - * + * Return: Success: Non-negative + * Failure: Negative *------------------------------------------------------------------------- */ herr_t @@ -1622,14 +1618,14 @@ done: * set up flush dependency/proxy even for file opened without * SWMR to resolve issues with opened objects. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/negative on failure * *------------------------------------------------------------------------- */ herr_t H5Fstart_swmr_write(hid_t file_id) { - H5VL_object_t *vol_obj = NULL; /* File info */ + H5VL_object_t *vol_obj = NULL; /* File info */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) @@ -1658,8 +1654,7 @@ done: * Purpose: Start metadata cache logging operations for a file. * - Logging must have been set up via the fapl. * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on errors *------------------------------------------------------------------------- */ herr_t @@ -1691,8 +1686,7 @@ done: * - Does not close the log file. * - Logging must have been set up via the fapl. * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on errors *------------------------------------------------------------------------- */ herr_t @@ -1724,8 +1718,7 @@ done: * set up via the fapl. is_currently_logging determines if * log messages are being recorded at this time. * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on errors *------------------------------------------------------------------------- */ herr_t @@ -1759,8 +1752,7 @@ done: * H5Fset_latest_format() starting release 1.10.2. * See explanation for H5Fset_latest_format() in H5Fdeprec.c. * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ herr_t @@ -1796,8 +1788,7 @@ done: * downgrade persistent file space to non-persistent * for 1.8 library. * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ herr_t @@ -1831,8 +1822,7 @@ done: * * Purpose: Resets statistics for the page buffer layer. * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ herr_t @@ -1862,8 +1852,7 @@ done: * * Purpose: Retrieves statistics for the page buffer layer. * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ herr_t @@ -1901,8 +1890,7 @@ done: * image_len: --size of the on disk metadata cache image * --zero if no cache image * - * Return: SUCCEED/FAIL - * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ herr_t @@ -1934,7 +1922,10 @@ done: * allocated memory in the file. * (See H5FDget_eoa() in H5FD.c) * - * Return: SUCCEED/FAIL + * Return: Success: First byte after allocated memory. + * Failure: HADDR_UNDEF + * + * Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ herr_t @@ -1967,7 +1958,7 @@ done: * * Purpose: Set the EOA for the file to the maximum of (EOA, EOF) + increment * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on errors *------------------------------------------------------------------------- */ herr_t @@ -691,11 +691,6 @@ END_FUNC(PRIV) /* end H5FA_delete() */ * Programmer: Vailin Choi * Thursday, April 30, 2009 * - * Modification: - * Prototype changed (HDFFV-10661) - * - herr_t to int - * - SUCCEED/FAIL to H5_ITER_CONT/H5_ITER_ERROR - * June 6, 2019 -BMR *------------------------------------------------------------------------- */ BEGIN_FUNC(PRIV, ERR, diff --git a/src/H5FAhdr.c b/src/H5FAhdr.c index 8f29b83..506c767 100644 --- a/src/H5FAhdr.c +++ b/src/H5FAhdr.c @@ -39,7 +39,7 @@ #include "H5Eprivate.h" /* Error handling */ #include "H5FApkg.h" /* Fixed Arrays */ #include "H5MFprivate.h" /* File memory management */ -#include "H5MMprivate.h" /* Memory management */ +#include "H5MMprivate.h" /* Memory management */ /****************/ @@ -789,7 +789,7 @@ done: * will be all zero during the driver close callback like during * the 'open' callback. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ @@ -1088,7 +1088,7 @@ done: * doesn't map to a free list then either the application 'free' * callback is invoked (if defined) or the memory is leaked. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ @@ -1382,11 +1382,11 @@ done: * be the constant H5P_DEFAULT). The result is written into the * buffer BUF. * - * Return: Success: SUCCEED + * Return: Success: Non-negative * The read result is written into the BUF buffer * which should be allocated by the caller. * - * Failure: FAIL + * Failure: Negative * The contents of BUF are undefined. * *------------------------------------------------------------------------- @@ -1436,7 +1436,7 @@ done: * constant H5P_DEFAULT). The bytes to be written come from the * buffer BUF. * - * Return: SUCCEED/FAIL + * Return: SNon-negative on success/Negative on failure * *------------------------------------------------------------------------- */ @@ -1483,7 +1483,7 @@ done: * Purpose: Notify driver to flush all cached data. If the driver has no * flush method then nothing happens. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failureL * *------------------------------------------------------------------------- */ @@ -1553,7 +1553,7 @@ done: * * Purpose: Notify driver to truncate the file back to the allocated size. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ @@ -1622,7 +1622,7 @@ done: * * Purpose: Set a file lock * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ @@ -1684,7 +1684,7 @@ done: * * Purpose: Remove a file lock * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ @@ -1773,7 +1773,7 @@ H5FD_get_fileno(const H5FD_t *file, unsigned long *filenum) * Purpose: Returns a pointer to the file handle of low-level virtual * file driver. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * *-------------------------------------------------------------------------- */ @@ -1919,7 +1919,7 @@ H5FD_set_paged_aggr(H5FD_t *file, hbool_t paged) * can't use the file to get the driver, the driver ID is passed * in as a parameter. * -* Return: SUCCEED/FAIL +* Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ diff --git a/src/H5FDmpio.c b/src/H5FDmpio.c index 8c7e91a..3d2e0cf 100644 --- a/src/H5FDmpio.c +++ b/src/H5FDmpio.c @@ -15,7 +15,7 @@ * Programmer: Robb Matzke <matzke@llnl.gov> * Thursday, July 29, 1999 * - * Purpose: This is the MPI-2 I/O driver. + * Purpose: This is the MPI-2 I/O driver. * */ diff --git a/src/H5FDsplitter.c b/src/H5FDsplitter.c index 13816a5..4ed3c4a 100644 --- a/src/H5FDsplitter.c +++ b/src/H5FDsplitter.c @@ -818,6 +818,9 @@ done: if (file_ptr->wo_file) { H5FD_close(file_ptr->wo_file); } + if (file_ptr->logfp) { + HDfclose(file_ptr->logfp); + } H5FL_FREE(H5FD_splitter_t, file_ptr); } } /* end if error */ @@ -36,7 +36,7 @@ #include "H5Eprivate.h" /* Error handling */ #include "H5FSpkg.h" /* File free space */ #include "H5MFprivate.h" /* File memory management */ -#include "H5MMprivate.h" /* Memory management */ +#include "H5MMprivate.h" /* Memory management */ /****************/ diff --git a/src/H5Fint.c b/src/H5Fint.c index e4c8229..0bda894 100644 --- a/src/H5Fint.c +++ b/src/H5Fint.c @@ -391,7 +391,7 @@ H5F__get_objects(const H5F_t *f, unsigned types, size_t max_nobjs, hid_t *obj_id if(H5I_iterate(H5I_DATASET, H5F__get_objects_cb, &olist, app_ref) < 0) HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(2)") } /* end if */ - } /* end if */ + } /* If the caller just wants to count the number of objects (OLIST.MAX_NOBJS is zero), * or the caller wants to get the list of IDs and the list isn't full, @@ -402,8 +402,8 @@ H5F__get_objects(const H5F_t *f, unsigned types, size_t max_nobjs, hid_t *obj_id olist.obj_type = H5I_GROUP; if(H5I_iterate(H5I_GROUP, H5F__get_objects_cb, &olist, app_ref) < 0) HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(3)") - } /* end if */ - } /* end if */ + } + } /* If the caller just wants to count the number of objects (OLIST.MAX_NOBJS is zero), * or the caller wants to get the list of IDs and the list isn't full, @@ -415,7 +415,7 @@ H5F__get_objects(const H5F_t *f, unsigned types, size_t max_nobjs, hid_t *obj_id if(H5I_iterate(H5I_DATATYPE, H5F__get_objects_cb, &olist, app_ref) < 0) HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(4)") } /* end if */ - } /* end if */ + } /* If the caller just wants to count the number of objects (OLIST.MAX_NOBJS is zero), * or the caller wants to get the list of IDs and the list isn't full, @@ -427,7 +427,7 @@ H5F__get_objects(const H5F_t *f, unsigned types, size_t max_nobjs, hid_t *obj_id if(H5I_iterate(H5I_ATTR, H5F__get_objects_cb, &olist, app_ref) < 0) HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(5)") } /* end if */ - } /* end if */ + } /* Set the number of objects currently open */ *obj_id_count_ptr = obj_id_count; @@ -1066,12 +1066,12 @@ H5F__new(H5F_shared_t *shared, unsigned flags, hid_t fcpl_id, hid_t fapl_id, H5F f->shared->feature_flags &= ~(unsigned)H5FD_FEAT_ACCUMULATE_METADATA; if(H5FD_set_feature_flags(f->shared->lf, f->shared->feature_flags) < 0) HGOTO_ERROR(H5E_FILE, H5E_CANTSET, NULL, "can't set feature_flags in VFD") - } /* end if */ + } else { /* If no value for read attempts has been set, use the default */ if(!f->shared->read_attempts) f->shared->read_attempts = H5F_METADATA_READ_ATTEMPTS; - } /* end else */ + } /* Determine the # of bins for metdata read retries */ if(H5F_set_retries(f) < 0) @@ -1138,7 +1138,7 @@ done: HDONE_ERROR(H5E_FILE, H5E_CANTDEC, NULL, "can't close property list") f->shared = H5FL_FREE(H5F_shared_t, f->shared); - } /* end if */ + } /* Free VOL object */ if(f->vol_obj) @@ -1146,7 +1146,7 @@ done: HDONE_ERROR(H5E_FILE, H5E_CANTDEC, NULL, "unable to free VOL object") f = H5FL_FREE(H5F_t, f); - } /* end if */ + } FUNC_LEAVE_NOAPI(ret_value) } /* end H5F__new() */ @@ -2298,7 +2298,7 @@ H5F_get_id(H5F_t *file) if((ret_value = H5VL_wrap_register(H5I_FILE, file, FALSE)) < 0) HGOTO_ERROR(H5E_ATOM, H5E_CANTREGISTER, H5I_INVALID_HID, "unable to register group") file->id_exists = TRUE; - } /* end if */ + } else { /* Increment reference count on existing ID */ if(H5I_inc_ref(ret_value, FALSE) < 0) diff --git a/src/H5Fprivate.h b/src/H5Fprivate.h index fbb164d..c5d4c89 100644 --- a/src/H5Fprivate.h +++ b/src/H5Fprivate.h @@ -25,15 +25,15 @@ typedef struct H5F_t H5F_t; #include "H5Fpublic.h" /* Public headers needed by this file */ -#include "H5FDpublic.h" /* File drivers */ +#include "H5FDpublic.h" /* File drivers */ /* Private headers needed by this file */ -#include "H5MMprivate.h" /* Memory management */ +#include "H5MMprivate.h" /* Memory management */ #ifdef H5_HAVE_PARALLEL -#include "H5Pprivate.h" /* Property lists */ +#include "H5Pprivate.h" /* Property lists */ #endif /* H5_HAVE_PARALLEL */ -#include "H5VMprivate.h" /* Vectors and arrays */ -#include "H5VLprivate.h" /* Virtual Object Layer */ +#include "H5VMprivate.h" /* Vectors and arrays */ +#include "H5VLprivate.h" /* Virtual Object Layer */ /**************************/ @@ -795,7 +795,6 @@ H5_DLL hsize_t H5F_get_alignment(const H5F_t *f); H5_DLL hsize_t H5F_get_threshold(const H5F_t *f); #ifdef H5_HAVE_PARALLEL H5_DLL H5P_coll_md_read_flag_t H5F_coll_md_read(const H5F_t *f); -H5_DLL void H5F_set_coll_md_read(H5F_t *f, H5P_coll_md_read_flag_t flag); #endif /* H5_HAVE_PARALLEL */ H5_DLL hbool_t H5F_use_mdc_logging(const H5F_t *f); H5_DLL hbool_t H5F_start_mdc_log_on_access(const H5F_t *f); diff --git a/src/H5Fquery.c b/src/H5Fquery.c index 68ad8e5..e1b11c8 100644 --- a/src/H5Fquery.c +++ b/src/H5Fquery.c @@ -229,6 +229,7 @@ H5F_get_extpath(const H5F_t *f) FUNC_ENTER_NOAPI_NOINIT_NOERR HDassert(f); + HDassert(f->shared); HDassert(f->shared->extpath); FUNC_LEAVE_NOAPI(f->shared->extpath) @@ -1259,6 +1260,7 @@ H5F_get_point_of_no_return(const H5F_t *f) FUNC_LEAVE_NOAPI(f->shared->point_of_no_return) } /* end H5F_get_point_of_no_return() */ + /*------------------------------------------------------------------------- * Function: H5F_get_null_fsm_addr * diff --git a/src/H5HLcache.c b/src/H5HLcache.c index cff3942..734ec5c 100644 --- a/src/H5HLcache.c +++ b/src/H5HLcache.c @@ -36,7 +36,7 @@ #include "H5Eprivate.h" /* Error handling */ #include "H5HLpkg.h" /* Local Heaps */ #include "H5MFprivate.h" /* File memory management */ -#include "H5MMprivate.h" /* Memory management */ +#include "H5MMprivate.h" /* Memory management */ #include "H5WBprivate.h" /* Wrapped Buffers */ @@ -67,6 +67,7 @@ typedef struct { unsigned init_count; /* # of times this type has been initialized*/ uint64_t id_count; /* Current number of IDs held */ uint64_t nextid; /* ID to use for the next atom */ + H5I_id_info_t *last_info; /* Info for most recent ID looked up */ H5SL_t *ids; /* Pointer to skip list that stores IDs */ } H5I_id_type_t; @@ -318,6 +319,7 @@ H5I_register_type(const H5I_class_t *cls) type_ptr->cls = cls; type_ptr->id_count = 0; type_ptr->nextid = cls->reserved; + type_ptr->last_info = NULL; if(NULL == (type_ptr->ids = H5SL_create(H5SL_TYPE_HID, NULL))) HGOTO_ERROR(H5E_ATOM, H5E_CANTCREATE, FAIL, "skip list creation failed") } /* end if */ @@ -807,6 +809,9 @@ H5I_register(H5I_type_t type, const void *object, hbool_t app_ref) /* Sanity check for the 'nextid' getting too large and wrapping around */ HDassert(type_ptr->nextid <= ID_MASK); + /* Set the most recent ID to this object */ + type_ptr->last_info = id_ptr; + /* Set return value */ ret_value = new_id; @@ -878,6 +883,9 @@ H5I_register_using_existing_id(H5I_type_t type, void *object, hbool_t app_ref, h HGOTO_ERROR(H5E_ATOM, H5E_CANTINSERT, FAIL, "can't insert ID node into skip list") type_ptr->id_count++; + /* Set the most recent ID to this object */ + type_ptr->last_info = id_ptr; + done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5I_register_using_existing_id() */ @@ -1236,6 +1244,10 @@ H5I__remove_common(H5I_id_type_t *type_ptr, hid_t id) if(NULL == (curr_id = (H5I_id_info_t *)H5SL_remove(type_ptr->ids, &id))) HGOTO_ERROR(H5E_ATOM, H5E_CANTDELETE, NULL, "can't remove ID node from skip list") + /* Check if this ID was the last one accessed */ + if(type_ptr->last_info == curr_id) + type_ptr->last_info = NULL; + ret_value = (void *)curr_id->obj_ptr; /* (Casting away const OK -QAK) */ curr_id = H5FL_FREE(H5I_id_info_t, curr_id); @@ -2185,8 +2197,16 @@ H5I__find_id(hid_t id) if(!type_ptr || type_ptr->init_count <= 0) HGOTO_DONE(NULL) - /* Locate the ID node for the ID */ - ret_value = (H5I_id_info_t *)H5SL_search(type_ptr->ids, &id); + /* Check for same ID as we have looked up last time */ + if(type_ptr->last_info && type_ptr->last_info->id == id) + ret_value = type_ptr->last_info; + else { + /* Locate the ID node for the ID */ + ret_value = (H5I_id_info_t *)H5SL_search(type_ptr->ids, &id); + + /* Remember this ID */ + type_ptr->last_info = ret_value; + } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value) @@ -264,7 +264,7 @@ H5L_term_package(void) * are interpreted relative to SRC_LOC_ID and DST_LOC_ID, * which are either file IDs or group ID. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * * Programmer: James Laird * Wednesday, March 29, 2006 @@ -308,13 +308,13 @@ H5Lmove(hid_t src_loc_id, const char *src_name, hid_t dst_loc_id, ((src_loc_id != H5L_SAME_LOC) ? src_loc_id : dst_loc_id), TRUE) < 0) HGOTO_ERROR(H5E_LINK, H5E_CANTSET, FAIL, "can't set access property list info") - /* Set location paramter for source object */ + /* Set location parameter for source object */ loc_params1.type = H5VL_OBJECT_BY_NAME; loc_params1.loc_data.loc_by_name.name = src_name; loc_params1.loc_data.loc_by_name.lapl_id = lapl_id; loc_params1.obj_type = H5I_get_type(src_loc_id); - /* Set location paramter for destination object */ + /* Set location parameter for destination object */ loc_params2.type = H5VL_OBJECT_BY_NAME; loc_params2.loc_data.loc_by_name.name = dst_name; loc_params2.loc_data.loc_by_name.lapl_id = lapl_id; @@ -354,7 +354,7 @@ done: * time and target. The new link can have a different name * and be in a different location than the original. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * * Programmer: James Laird * Wednesday, March 29, 2006 @@ -398,13 +398,13 @@ H5Lcopy(hid_t src_loc_id, const char *src_name, hid_t dst_loc_id, ((src_loc_id != H5L_SAME_LOC) ? src_loc_id : dst_loc_id), TRUE) < 0) HGOTO_ERROR(H5E_LINK, H5E_CANTSET, FAIL, "can't set access property list info") - /* Set location paramter for source object */ + /* Set location parameter for source object */ loc_params1.type = H5VL_OBJECT_BY_NAME; loc_params1.loc_data.loc_by_name.name = src_name; loc_params1.loc_data.loc_by_name.lapl_id = lapl_id; loc_params1.obj_type = H5I_get_type(src_loc_id); - /* Set location paramter for destination object */ + /* Set location parameter for destination object */ loc_params2.type = H5VL_OBJECT_BY_NAME; loc_params2.loc_data.loc_by_name.name = dst_name; loc_params2.loc_data.loc_by_name.lapl_id = lapl_id; @@ -448,7 +448,7 @@ done: * LINK_NAME is `./x/y/bar' and a request is made for `./x/y/bar' * then the actual object looked up is `./x/y/./foo'. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Monday, April 6, 1998 @@ -519,7 +519,7 @@ done: * NEW_NAME are interpreted relative to CUR_LOC_ID and * NEW_LOC_ID, which are either file IDs or group IDs. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Monday, April 6, 1998 @@ -621,7 +621,7 @@ done: * The link class of the new link must already be registered * with the library. * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * * Programmer: James Laird * Tuesday, December 13, 2005 @@ -687,7 +687,7 @@ done: * object is open, then the reclamation of the file space is * delayed until all handles to the object are closed). * - * Return: SUCCEED/FAIL + * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Monday, April 6, 1998 @@ -966,11 +966,11 @@ done: /*------------------------------------------------------------------------- - * Function: H5Lget_info2 + * Function: H5Lget_info2 * - * Purpose: Gets metadata for a link. + * Purpose: Gets metadata for a link. * - * Return: Success: Non-negative with information in LINFO + * Return: Success: Non-negative with information in LINFO * Failure: Negative * * Programmer: James Laird @@ -1016,13 +1016,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5Lget_info_by_idx2 + * Function: H5Lget_info_by_idx2 * - * Purpose: Gets metadata for a link, according to the order within an + * Purpose: Gets metadata for a link, according to the order within an * index. * - * Return: Success: Non-negative with information in LINFO - * Failure: Negative + * Return: Success: Non-negative with information in LINFO + * Failure: Negative * * Programmer: Quincey Koziol * Monday, November 6, 2006 @@ -1221,7 +1221,7 @@ done: * Return: Success: Non-negative length of name, with information * in NAME buffer * - * Failure: -1 + * Failure: -1 * * Programmer: Quincey Koziol * Saturday, November 11, 2006 @@ -3178,11 +3178,11 @@ done: /*------------------------------------------------------------------------- - * Function: H5L_get_info + * Function: H5L_get_info * - * Purpose: Returns metadata about a link. + * Purpose: Returns metadata about a link. * - * Return: Non-negative on success/Negative on failure + * Return: SUCCEED/FAIL * * Programmer: James Laird * Monday, April 17 2006 diff --git a/src/H5Lexternal.c b/src/H5Lexternal.c index 1b007b6..8a3e3e1 100644 --- a/src/H5Lexternal.c +++ b/src/H5Lexternal.c @@ -125,7 +125,7 @@ H5L__extern_traverse(const char H5_ATTR_UNUSED *link_name, hid_t cur_group, size_t fname_len; /* Length of external link file name */ unsigned intent; /* File access permissions */ H5L_elink_cb_t cb_info; /* Callback info struct */ - hid_t fapl_id = -1; /* File access property list for external link's file */ + hid_t fapl_id = H5I_INVALID_HID; /* File access property list for external link's file */ void *ext_obj = NULL; /* External link's object */ hid_t ext_obj_id = H5I_INVALID_HID; /* ID for external link's object */ H5I_type_t opened_type; /* ID type of external link's object */ diff --git a/src/H5Lprivate.h b/src/H5Lprivate.h index ab68b84..0487557 100644 --- a/src/H5Lprivate.h +++ b/src/H5Lprivate.h @@ -68,7 +68,7 @@ typedef struct { hsize_t n; /* Offset of link within index */ /* Out */ - H5L_info2_t *linfo; /* Buffer to return to user */ + H5L_info2_t *linfo; /* Buffer to return to user */ } H5L_trav_gibi_t; /* User data for path traversal routine for getting name by index */ @@ -1137,10 +1137,11 @@ HDfprintf(stderr, "%s: Entering - alloc_type = %u, addr = %a, size = %Hu\n", FUN /* If it's metadata, check if the space to free intersects with the file's * metadata accumulator */ - if(H5FD_MEM_DRAW != alloc_type) + if(H5FD_MEM_DRAW != alloc_type) { /* Check if the space to free intersects with the file's metadata accumulator */ if(H5F__accum_free(f->shared, alloc_type, addr, size) < 0) HGOTO_ERROR(H5E_RESOURCE, H5E_CANTFREE, FAIL, "can't check free space intersection w/metadata accumulator") + } /* end if */ /* Check if the free space manager for the file has been initialized */ if(!f->shared->fs_man[fs_type]) { @@ -24,21 +24,21 @@ /* Module Setup */ /****************/ -#define H5F_FRIEND /*suppress error about including H5Fpkg */ +#define H5F_FRIEND /* Suppress error about including H5Fpkg */ #include "H5PBmodule.h" /* This source code file is part of the H5PB module */ /***********/ /* Headers */ /***********/ -#include "H5private.h" /* Generic Functions */ -#include "H5Eprivate.h" /* Error handling */ -#include "H5Fpkg.h" /* Files */ -#include "H5FDprivate.h" /* File drivers */ -#include "H5Iprivate.h" /* IDs */ -#include "H5MMprivate.h" /* Memory management */ -#include "H5PBpkg.h" /* File access */ -#include "H5SLprivate.h" /* Skip List */ +#include "H5private.h" /* Generic Functions */ +#include "H5Eprivate.h" /* Error handling */ +#include "H5Fpkg.h" /* Files */ +#include "H5FDprivate.h" /* File drivers */ +#include "H5Iprivate.h" /* IDs */ +#include "H5MMprivate.h" /* Memory management */ +#include "H5PBpkg.h" /* File access */ +#include "H5SLprivate.h" /* Skip List */ /****************/ @@ -153,7 +153,7 @@ H5FL_DEFINE_STATIC(H5PB_entry_t); /*------------------------------------------------------------------------- - * Function: H5PB_reset_stats + * Function: H5PB_reset_stats * * Purpose: This function was created without documentation. * What follows is my best understanding of Mohamad's intent. @@ -162,7 +162,7 @@ H5FL_DEFINE_STATIC(H5PB_entry_t); * * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -190,7 +190,7 @@ H5PB_reset_stats(H5PB_t *page_buf) /*------------------------------------------------------------------------- - * Function: H5PB_get_stats + * Function: H5PB_get_stats * * Purpose: This function was created without documentation. * What follows is my best understanding of Mohamad's intent. @@ -202,9 +202,9 @@ H5PB_reset_stats(H5PB_t *page_buf) * --evictions: the number of metadata and raw data evictions from the page buffer layer * --bypasses: the number of metadata and raw data accesses that bypass the page buffer layer * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -233,16 +233,16 @@ H5PB_get_stats(const H5PB_t *page_buf, unsigned accesses[2], unsigned hits[2], /*------------------------------------------------------------------------- - * Function: H5PB_print_stats() + * Function: H5PB_print_stats() * * Purpose: This function was created without documentation. * What follows is my best understanding of Mohamad's intent. * * Print out statistics collected for the page buffer layer. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -278,13 +278,13 @@ H5PB_print_stats(const H5PB_t *page_buf) /*------------------------------------------------------------------------- - * Function: H5PB_create + * Function: H5PB_create * - * Purpose: Create and setup the PB on the file. + * Purpose: Create and setup the PB on the file. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -314,7 +314,7 @@ H5PB_create(H5F_shared_t *f_sh, size_t size, unsigned page_buf_min_meta_perc, un /* Allocate the new page buffering structure */ if(NULL == (page_buf = H5FL_CALLOC(H5PB_t))) - HGOTO_ERROR(H5E_PAGEBUF, H5E_NOSPACE, FAIL, "memory allocation failed") + HGOTO_ERROR(H5E_PAGEBUF, H5E_NOSPACE, FAIL, "memory allocation failed") page_buf->max_size = size; H5_CHECKED_ASSIGN(page_buf->page_size, size_t, f_sh->fs_page_size, hsize_t); @@ -355,13 +355,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB__flush_cb + * Function: H5PB__flush_cb * - * Purpose: Callback to flush PB skiplist entries. + * Purpose: Callback to flush PB skiplist entries. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -389,13 +389,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB_flush + * Function: H5PB_flush * - * Purpose: Flush/Free all the PB entries to the file. + * Purpose: Flush/Free all the PB entries to the file. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -424,13 +424,13 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB__dest_cb + * Function: H5PB__dest_cb * - * Purpose: Callback to free PB skiplist entries. + * Purpose: Callback to free PB skiplist entries. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -461,13 +461,13 @@ H5PB__dest_cb(void *item, void H5_ATTR_UNUSED *key, void *_op_data) /*------------------------------------------------------------------------- - * Function: H5PB_dest + * Function: H5PB_dest * - * Purpose: Flush and destroy the PB on the file if it exists. + * Purpose: Flush and destroy the PB on the file if it exists. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -515,16 +515,16 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB_add_new_page + * Function: H5PB_add_new_page * - * Purpose: Add a new page to the new page skip list. This is called + * Purpose: Add a new page to the new page skip list. This is called * from the MF layer when a new page is allocated to * indicate to the page buffer layer that a read of the page * from the file is not necessary since it's an empty page. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -575,16 +575,16 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB_update_entry + * Function: H5PB_update_entry * - * Purpose: In PHDF5, entries that are written by other processes and just + * Purpose: In PHDF5, entries that are written by other processes and just * marked clean by this process have to have their corresponding * pages updated if they exist in the page buffer. * This routine checks and update the pages. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -675,14 +675,14 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB_read + * Function: H5PB_read * - * Purpose: Reads in the data from the page containing it if it exists + * Purpose: Reads in the data from the page containing it if it exists * in the PB cache; otherwise reads in the page through the VFD. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -971,15 +971,15 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB_write + * Function: H5PB_write * - * Purpose: Write data into the Page Buffer. If the page exists in the - * cache, update it; otherwise read it from disk, update it, and - * insert into cache. + * Purpose: Write data into the Page Buffer. If the page exists in the + * cache, update it; otherwise read it from disk, update it, and + * insert into cache. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -1311,26 +1311,24 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB__insert_entry() - * - * Purpose: ??? + * Function: H5PB__insert_entry() * - * This function was created without documentation. - * What follows is my best understanding of Mohamad's intent. + * Purpose: This function was created without documentation. + * What follows is my best understanding of Mohamad's intent. * - * Insert the supplied page into the page buffer, both the - * skip list and the LRU. + * Insert the supplied page into the page buffer, both the + * skip list and the LRU. * - * As best I can tell, this function imposes no limit on the - * number of entries in the page buffer beyond an assertion - * failure it the page count exceeds the limit. + * As best I can tell, this function imposes no limit on the + * number of entries in the page buffer beyond an assertion + * failure it the page count exceeds the limit. * * JRM -- 12/22/16 * * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -1361,16 +1359,21 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB__make_space() + * Function: H5PB__make_space() * - * Purpose: If necessary and if possible, evict a page from the page - * buffer to make space for the supplied page. Depending on - * the page buffer configuration and contents, and the page - * supplied this may or may not be possible. + * Purpose: This function was created without documentation. + * What follows is my best understanding of Mohamad's intent. * - * Return: Non-negative on success/Negative on failure + * If necessary and if possible, evict a page from the page + * buffer to make space for the supplied page. Depending on + * the page buffer configuration and contents, and the page + * supplied this may or may not be possible. * - * Programmer: Mohamad Chaarawi + * JRM -- 12/22/16 + * + * Return: Non-negative on success/Negative on failure + * + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ @@ -1459,17 +1462,16 @@ done: /*------------------------------------------------------------------------- - * Function: H5PB__write_entry() - * - * Purpose: ??? + * Function: H5PB__write_entry() * - * This function was created without documentation. - * What follows is my best understanding of Mohamad's intent. + * Purpose: ??? * + * This function was created without documentation. + * What follows is my best understanding of Mohamad's intent. * - * Return: Non-negative on success/Negative on failure + * Return: Non-negative on success/Negative on failure * - * Programmer: Mohamad Chaarawi + * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ diff --git a/src/H5Pacpl.c b/src/H5Pacpl.c index 53e68fa..166a35f 100644 --- a/src/H5Pacpl.c +++ b/src/H5Pacpl.c @@ -33,7 +33,6 @@ #include "H5private.h" /* Generic Functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Ppkg.h" /* Property lists */ -#include "H5VLprivate.h" /* Virtual Object Layer */ /****************/ diff --git a/src/H5Pint.c b/src/H5Pint.c index 3cefb64..2e463b2 100644 --- a/src/H5Pint.c +++ b/src/H5Pint.c @@ -1481,7 +1481,7 @@ H5P__free_del_name_cb(void *item, void H5_ATTR_UNUSED *key, void H5_ATTR_UNUSED NAME H5P__access_class PURPOSE - Internal routine to increment or decrement list & class dependancies on a + Internal routine to increment or decrement list & class dependencies on a property list class USAGE herr_t H5P__access_class(pclass,mod) diff --git a/src/H5Plapl.c b/src/H5Plapl.c index 3d00c12..8fdcc8b 100644 --- a/src/H5Plapl.c +++ b/src/H5Plapl.c @@ -344,7 +344,7 @@ H5P__lacc_elink_fapl_enc(const void *value, void **_pp, size_t *size) uint8_t **pp = (uint8_t **)_pp; H5P_genplist_t *fapl_plist; /* Pointer to property list */ hbool_t non_default_fapl = FALSE; /* Whether the FAPL is non-default */ - size_t fapl_size = 0; /* FAPL's encoded size */ + size_t fapl_size = 0; /* FAPL's encoded size */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC @@ -595,7 +595,7 @@ static herr_t H5P__lacc_elink_fapl_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value) { hid_t l_fapl_id; - herr_t ret_value = SUCCEED; + herr_t ret_value = SUCCEED; FUNC_ENTER_STATIC diff --git a/src/H5Plcpl.c b/src/H5Plcpl.c index fc1a3b9..9c32552 100644 --- a/src/H5Plcpl.c +++ b/src/H5Plcpl.c @@ -119,7 +119,7 @@ static const unsigned H5L_def_intmd_group_g = H5L_CRT_INTERMEDIATE_GROUP_DEF; herr_t H5P_lcrt_reg_prop(H5P_genclass_t *pclass) { - herr_t ret_value = SUCCEED; /* Return value */ + herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(FAIL) diff --git a/src/H5Ptest.c b/src/H5Ptest.c index 114b37b..303fbf7 100644 --- a/src/H5Ptest.c +++ b/src/H5Ptest.c @@ -82,7 +82,7 @@ done: PURPOSE Routine to open a [copy of] a class with its full path name USAGE - hid_t H5P__open_class_name_test(path) + hid_t H5P__open_class_path_test(path) const char *path; IN: Full path name of class to open [copy of] RETURNS Success: ID of generic property class @@ -105,19 +105,19 @@ H5P__open_class_path_test(const char *path) FUNC_ENTER_PACKAGE /* Check arguments. */ - if(NULL == path || *path=='\0') + if (NULL == path || *path=='\0') HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, H5I_INVALID_HID, "invalid class path"); /* Open the property list class */ - if(NULL == (pclass = H5P__open_class_path(path))) + if (NULL == (pclass = H5P__open_class_path(path))) HGOTO_ERROR(H5E_PLIST, H5E_NOTFOUND, H5I_INVALID_HID, "unable to find class with full path"); /* Get an atom for the class */ - if((ret_value = H5I_register(H5I_GENPROP_CLS, pclass, TRUE)) < 0) + if ((ret_value = H5I_register(H5I_GENPROP_CLS, pclass, TRUE)) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTREGISTER, H5I_INVALID_HID, "unable to atomize property list class"); done: - if(H5I_INVALID_HID == ret_value && pclass) + if (H5I_INVALID_HID == ret_value && pclass) H5P__close_class(pclass); FUNC_LEAVE_NOAPI(ret_value) diff --git a/src/H5Shyper.c b/src/H5Shyper.c index dc97ea2..b352374 100644 --- a/src/H5Shyper.c +++ b/src/H5Shyper.c @@ -6059,7 +6059,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_add_span_element_helper() */ - + /*-------------------------------------------------------------------------- NAME H5S_hyper_add_span_element @@ -6169,7 +6169,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_hyper_add_span_element() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_intersect_block_helper @@ -6259,7 +6259,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_intersect_block_helper() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_intersect_block @@ -6391,7 +6391,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_intersect_block() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_adjust_u_helper @@ -6458,7 +6458,7 @@ H5S__hyper_adjust_u_helper(H5S_hyper_span_info_t *spans, unsigned rank, FUNC_LEAVE_NOAPI_VOID } /* end H5S__hyper_adjust_u_helper() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_adjust_u @@ -6529,7 +6529,7 @@ H5S__hyper_adjust_u(H5S_t *space, const hsize_t *offset) FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5S__hyper_adjust_u() */ - + /*------------------------------------------------------------------------- * Function: H5S__hyper_project_scalar * @@ -6605,7 +6605,7 @@ H5S__hyper_project_scalar(const H5S_t *space, hsize_t *offset) FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5S__hyper_project_scalar() */ - + /*------------------------------------------------------------------------- * Function: H5S__hyper_project_simple_lower * @@ -6652,7 +6652,7 @@ H5S__hyper_project_simple_lower(const H5S_t *base_space, H5S_t *new_space) FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5S__hyper_project_simple_lower() */ - + /*------------------------------------------------------------------------- * Function: H5S__hyper_project_simple_higher * @@ -6752,7 +6752,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_project_simple_higher() */ - + /*------------------------------------------------------------------------- * Function: H5S__hyper_project_simple * @@ -6926,7 +6926,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_project_simple() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_adjust_s_helper @@ -6993,7 +6993,7 @@ H5S__hyper_adjust_s_helper(H5S_hyper_span_info_t *spans, unsigned rank, FUNC_LEAVE_NOAPI_VOID } /* end H5S__hyper_adjust_s_helper() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_adjust_s @@ -7066,7 +7066,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_adjust_s() */ - + /*-------------------------------------------------------------------------- NAME H5S_hyper_normalize_offset @@ -7124,7 +7124,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_hyper_normalize_offset() */ - + /*-------------------------------------------------------------------------- NAME H5S_hyper_denormalize_offset @@ -7168,7 +7168,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_hyper_denormalize_offset() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_append_span @@ -7199,7 +7199,7 @@ H5S__hyper_append_span(H5S_hyper_span_info_t **span_tree, unsigned ndims, FUNC_ENTER_STATIC - /* Sanity check */ + /* Sanity checks */ HDassert(span_tree); /* Check for adding first node to merged spans */ @@ -7306,7 +7306,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_append_span() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_clip_spans @@ -7902,7 +7902,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_clip_spans() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_merge_spans_helper @@ -8218,7 +8218,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_merge_spans_helper() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_merge_spans @@ -8273,7 +8273,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_merge_spans() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_spans_nelem_helper @@ -8346,7 +8346,7 @@ H5S__hyper_spans_nelem_helper(H5S_hyper_span_info_t *spans, unsigned op_info_i, FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_spans_nelem_helper() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_spans_nelem @@ -8435,7 +8435,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_add_disjoint_spans */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_make_spans @@ -8802,7 +8802,7 @@ H5S__hyper_update_diminfo(H5S_t *space, H5S_seloper_t op, FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_update_diminfo() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_rebuild_helper @@ -8911,7 +8911,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_rebuild_helper() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_rebuild @@ -8961,7 +8961,7 @@ H5S__hyper_rebuild(H5S_t *space) FUNC_LEAVE_NOAPI_VOID } /* end H5S__hyper_rebuild() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_generate_spans @@ -9101,7 +9101,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__check_spans_overlap() */ - + /*-------------------------------------------------------------------------- NAME H5S__fill_in_new_space @@ -9400,7 +9400,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__fill_in_new_space() */ - + /*------------------------------------------------------------------------- * Function: H5S__generate_hyperlab * @@ -9490,7 +9490,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__generate_hyperslab() */ - + /*------------------------------------------------------------------------- * Function: H5S__set_regular_hyperslab * @@ -9820,7 +9820,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_regular_and_single_block() */ - + /*------------------------------------------------------------------------- * Function: H5S_select_hyperslab * @@ -10138,7 +10138,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_select_hyperslab() */ - + /*-------------------------------------------------------------------------- NAME H5Sselect_hyperslab @@ -10202,7 +10202,7 @@ done: FUNC_LEAVE_API(ret_value) } /* end H5Sselect_hyperslab() */ - + /*-------------------------------------------------------------------------- NAME H5S_combine_hyperslab @@ -10408,7 +10408,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_combine_hyperslab() */ - + /*------------------------------------------------------------------------- * Function: H5S__fill_in_select * @@ -10461,7 +10461,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__fill_in_select() */ - + /*-------------------------------------------------------------------------- NAME H5Scombine_hyperslab @@ -10525,7 +10525,7 @@ done: FUNC_LEAVE_API(ret_value) } /* end H5Scombine_hyperslab() */ - + /*------------------------------------------------------------------------- * Function: H5S__combine_select * @@ -10593,7 +10593,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__combine_select() */ - + /*-------------------------------------------------------------------------- NAME H5Scombine_select @@ -10728,7 +10728,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__modify_select() */ - + /*-------------------------------------------------------------------------- NAME H5Smodify_select @@ -10810,7 +10810,7 @@ done: FUNC_LEAVE_API(ret_value) } /* end H5Smodify_select() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_proj_int_build_proj @@ -11204,7 +11204,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_proj_int_build_proj() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_proj_int_iterate @@ -11455,7 +11455,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_proj_int_iterate() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_project_intersection @@ -11645,7 +11645,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_project_intersection() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_get_clip_diminfo @@ -11700,7 +11700,7 @@ H5S__hyper_get_clip_diminfo(hsize_t start, hsize_t stride, hsize_t *count, FUNC_LEAVE_NOAPI_VOID } /* end H5S__hyper_get_clip_diminfo() */ - + /*-------------------------------------------------------------------------- NAME H5S_hyper_clip_unlim @@ -11826,7 +11826,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_hyper_clip_unlim() */ - + /*-------------------------------------------------------------------------- NAME H5S__hyper_get_clip_extent_real @@ -11908,7 +11908,7 @@ H5S__hyper_get_clip_extent_real(const H5S_t *clip_space, hsize_t num_slices, FUNC_LEAVE_NOAPI(ret_value) } /* end H5S__hyper_get_clip_extent_real() */ - + /*-------------------------------------------------------------------------- NAME H5S_hyper_get_clip_extent @@ -11971,7 +11971,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_hyper_get_clip_extent() */ - + /*-------------------------------------------------------------------------- NAME H5S_hyper_get_clip_extent_match @@ -12061,7 +12061,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_hyper_get_clip_extent_match() */ - + /*-------------------------------------------------------------------------- NAME H5S_hyper_get_unlim_block @@ -12144,7 +12144,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_hyper_get_unlim_block */ - + /*-------------------------------------------------------------------------- NAME H5S_hyper_get_first_inc_block @@ -12212,7 +12212,7 @@ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5S_hyper_get_first_inc_block */ - + /*-------------------------------------------------------------------------- NAME H5Sis_regular_hyperslab @@ -12254,7 +12254,7 @@ done: FUNC_LEAVE_API(ret_value) } /* end H5Sis_regular_hyperslab() */ - + /*-------------------------------------------------------------------------- NAME H5Sget_regular_hyperslab diff --git a/src/H5Sselect.c b/src/H5Sselect.c index 56f14ba..1072d7d 100644 --- a/src/H5Sselect.c +++ b/src/H5Sselect.c @@ -1885,6 +1885,15 @@ H5S_select_shape_same(const H5S_t *space1, const H5S_t *space2) space_a_dim--; } /* end while */ + + /* Check for a single block in each selection */ + if(H5S_SELECT_IS_SINGLE(space_a) && H5S_SELECT_IS_SINGLE(space_b)) { + /* If both selections are a single block and their bounds are + * the same, then the selections are the same, even if the + * selection types are different. + */ + HGOTO_DONE(TRUE) + } /* end if */ } /* end if */ /* If the dataspaces have the same selection type, use the selection's @@ -1755,15 +1755,16 @@ H5Tcopy(hid_t obj_id) switch(H5I_get_type(obj_id)) { case H5I_DATATYPE: + /* The argument is a datatype handle */ if(NULL == (dt = (H5T_t *)H5I_object(obj_id))) - HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, H5I_INVALID_HID, "type_id is not a datatype ID") + HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, H5I_INVALID_HID, "obj_id is not a datatype ID") break; case H5I_DATASET: { H5VL_object_t *vol_obj = NULL; /* Dataset structure */ - /* Check args */ + /* The argument is a dataset handle */ if(NULL == (vol_obj = (H5VL_object_t *)H5I_object_verify(obj_id, H5I_DATASET))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, H5I_INVALID_HID, "type_id is not a dataset ID") @@ -1776,9 +1777,8 @@ H5Tcopy(hid_t obj_id) /* Unwrap the type ID */ if(NULL == (dt = (H5T_t *)H5I_object(dset_tid))) HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, H5I_INVALID_HID, "received invalid datatype from the dataset") - - break; } + break; case H5I_UNINIT: case H5I_BADID: @@ -1802,7 +1802,7 @@ H5Tcopy(hid_t obj_id) /* Copy datatype */ if(NULL == (new_dt = H5T_copy(dt, H5T_COPY_TRANSIENT))) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, H5I_INVALID_HID, "unable to copy") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, H5I_INVALID_HID, "unable to copy"); /* Get an ID for the copied datatype */ if((ret_value = H5I_register(H5I_DATATYPE, new_dt, TRUE)) < 0) @@ -2345,9 +2345,9 @@ H5T_get_super(const H5T_t *dt) HDassert(dt); if(!dt->shared->parent) - HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "not a derived data type") + HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "not a derived data type"); if(NULL == (ret_value = H5T_copy(dt->shared->parent, H5T_COPY_ALL))) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, NULL, "unable to copy parent data type") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, NULL, "unable to copy parent data type"); done: FUNC_LEAVE_NOAPI(ret_value) @@ -3222,7 +3222,7 @@ H5T__create(H5T_class_t type, size_t size) /* Copy the default string datatype */ if(NULL == (dt = H5T_copy(origin_dt, H5T_COPY_TRANSIENT))) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, NULL, "unable to copy") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, NULL, "unable to copy"); /* Modify the datatype */ if(H5T__set_size(dt, size) < 0) @@ -4000,7 +4000,7 @@ H5T_close_real(H5T_t *dt) /* Clean up resources, depending on shared state */ if(dt->shared->state != H5T_STATE_OPEN) { if(H5T__free(dt) < 0) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTFREE, FAIL, "unable to free datatype") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTFREE, FAIL, "unable to free datatype"); dt->shared = H5FL_FREE(H5T_shared_t, dt->shared); } /* end if */ @@ -4094,7 +4094,7 @@ H5T_close(H5T_t *dt) /* Clean up resources */ if(H5T_close_real(dt) < 0) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTRELEASE, FAIL, "unable to free datatype") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTRELEASE, FAIL, "unable to free datatype"); done: FUNC_LEAVE_NOAPI(ret_value) @@ -4143,7 +4143,7 @@ H5T__set_size(H5T_t *dt, size_t size) if(dt->shared->parent) { if(H5T__set_size(dt->shared->parent, size) < 0) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to set size for parent data type") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to set size for parent data type"); /* Adjust size of datatype appropriately */ if(dt->shared->type==H5T_ARRAY) @@ -4185,7 +4185,7 @@ H5T__set_size(H5T_t *dt, size_t size) size_t max_size; if((num_membs = H5T_get_nmembers(dt)) < 0) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to get number of members") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to get number of members"); if(num_membs) { for(i = 0; i < (unsigned)num_membs; i++) { @@ -4199,7 +4199,7 @@ H5T__set_size(H5T_t *dt, size_t size) max_size = H5T__get_member_size(dt, max_index); if(size < (max_offset + max_size)) - HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "size shrinking will cut off last member ") + HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "size shrinking will cut off last member "); } /* end if */ /* Compound must not have been packed previously */ @@ -4219,7 +4219,7 @@ H5T__set_size(H5T_t *dt, size_t size) /* Get a copy of unsigned char type as the base/parent type */ if(NULL == (base = (H5T_t *)H5I_object(H5T_NATIVE_UCHAR))) - HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "invalid base datatype") + HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "invalid base datatype"); dt->shared->parent=H5T_copy(base,H5T_COPY_ALL); /* change this datatype into a VL string */ @@ -4245,7 +4245,7 @@ H5T__set_size(H5T_t *dt, size_t size) /* Set up VL information */ if (H5T_set_loc(dt, NULL, H5T_LOC_MEMORY)<0) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "invalid datatype location") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "invalid datatype location"); } /* end if */ else { prec = 8 * size; @@ -4261,7 +4261,7 @@ H5T__set_size(H5T_t *dt, size_t size) if(dt->shared->u.atomic.u.f.sign >= prec+offset || dt->shared->u.atomic.u.f.epos + dt->shared->u.atomic.u.f.esize > prec+offset || dt->shared->u.atomic.u.f.mpos + dt->shared->u.atomic.u.f.msize > prec+offset) { - HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "adjust sign, mantissa, and exponent fields first") + HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "adjust sign, mantissa, and exponent fields first"); } break; @@ -4401,7 +4401,7 @@ H5T_cmp(const H5T_t *dt1, const H5T_t *dt2, hbool_t superset) /* Build an index for each type so the names are sorted */ if(NULL == (idx1 = (unsigned *)H5MM_malloc(dt1->shared->u.compnd.nmembs * sizeof(unsigned))) || NULL == (idx2 = (unsigned *)H5MM_malloc(dt2->shared->u.compnd.nmembs * sizeof(unsigned)))) - HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, 0, "memory allocation failed") + HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, 0, "memory allocation failed"); for(u = 0; u < dt1->shared->u.compnd.nmembs; u++) idx1[u] = idx2[u] = u; if(dt1->shared->u.enumer.nmembs > 1) { @@ -4487,7 +4487,7 @@ H5T_cmp(const H5T_t *dt1, const H5T_t *dt2, hbool_t superset) /* Build an index for each type so the names are sorted */ if(NULL == (idx1 = (unsigned *)H5MM_malloc(dt1->shared->u.enumer.nmembs * sizeof(unsigned))) || NULL == (idx2 = (unsigned *)H5MM_malloc(dt2->shared->u.enumer.nmembs * sizeof(unsigned)))) - HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, 0, "memory allocation failed") + HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, 0, "memory allocation failed"); for(u=0; u<dt1->shared->u.enumer.nmembs; u++) idx1[u] = u; if(dt1->shared->u.enumer.nmembs > 1) { @@ -5661,7 +5661,7 @@ H5T_set_loc(H5T_t *dt, H5VL_object_t *file, H5T_loc_t loc) /* Range check against compound member's offset */ if ((accum_change < 0) && ((ssize_t) dt->shared->u.compnd.memb[i].offset < accum_change)) - HGOTO_ERROR(H5E_DATATYPE, H5E_BADVALUE, FAIL, "invalid field size in datatype") + HGOTO_ERROR(H5E_DATATYPE, H5E_BADVALUE, FAIL, "invalid field size in datatype"); /* Apply the accumulated size change to the offset of the field */ dt->shared->u.compnd.memb[i].offset += (size_t) accum_change; @@ -5677,7 +5677,7 @@ H5T_set_loc(H5T_t *dt, H5VL_object_t *file, H5T_loc_t loc) /* Mark the VL, compound, enum or array type */ if((changed = H5T_set_loc(memb_type, file, loc)) < 0) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "Unable to set VL location") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "Unable to set VL location"); if(changed > 0) ret_value = changed; @@ -5686,7 +5686,7 @@ H5T_set_loc(H5T_t *dt, H5VL_object_t *file, H5T_loc_t loc) /* Fail if the old_size is zero */ if (0 == old_size) - HGOTO_ERROR(H5E_DATATYPE, H5E_BADVALUE, FAIL, "old_size of zero would cause division by zero") + HGOTO_ERROR(H5E_DATATYPE, H5E_BADVALUE, FAIL, "old_size of zero would cause division by zero"); /* Adjust the size of the member */ dt->shared->u.compnd.memb[i].size = (dt->shared->u.compnd.memb[i].size*memb_type->shared->size)/old_size; @@ -5699,7 +5699,7 @@ H5T_set_loc(H5T_t *dt, H5VL_object_t *file, H5T_loc_t loc) /* Range check against datatype size */ if ((accum_change < 0) && ((ssize_t) dt->shared->size < accum_change)) - HGOTO_ERROR(H5E_DATATYPE, H5E_BADVALUE, FAIL, "invalid field size in datatype") + HGOTO_ERROR(H5E_DATATYPE, H5E_BADVALUE, FAIL, "invalid field size in datatype"); /* Apply the accumulated size change to the datatype */ dt->shared->size += (size_t) accum_change; @@ -5711,14 +5711,14 @@ H5T_set_loc(H5T_t *dt, H5VL_object_t *file, H5T_loc_t loc) /* (If the force_conv flag is _not_ set, the type cannot change in size, so don't recurse) */ if(dt->shared->parent->shared->force_conv && H5T_IS_COMPLEX(dt->shared->parent->shared->type)) { if((changed = H5T_set_loc(dt->shared->parent, file, loc)) < 0) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "Unable to set VL location") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "Unable to set VL location"); if(changed > 0) ret_value = changed; } /* end if */ /* Mark this VL sequence */ if((changed = H5T__vlen_set_loc(dt, file, loc)) < 0) - HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "Unable to set VL location") + HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "Unable to set VL location"); if(changed > 0) ret_value = changed; break; diff --git a/test/freespace.c b/test/freespace.c index f9f1932..124ae3e 100644 --- a/test/freespace.c +++ b/test/freespace.c @@ -880,7 +880,7 @@ test_fs_sect_add(hid_t fapl) FAIL_STACK_ERROR fs_addr = HADDR_UNDEF; - /* Close the file and dxpl */ + /* Close the file */ if(H5Fclose(file) < 0) FAIL_STACK_ERROR @@ -1249,7 +1249,7 @@ test_fs_sect_find(hid_t fapl) FAIL_STACK_ERROR fs_addr = HADDR_UNDEF; - /* Close the file and dxpl */ + /* Close the file */ if(H5Fclose(file) < 0) FAIL_STACK_ERROR @@ -2737,7 +2737,7 @@ test_fs_sect_extend(hid_t fapl) PASSED(); - /* Close the file and dxpl */ + /* Close the file */ if(H5Fclose(file) < 0) FAIL_STACK_ERROR @@ -2839,7 +2839,7 @@ test_fs_sect_iterate(hid_t fapl) FAIL_STACK_ERROR fs_addr = HADDR_UNDEF; - /* Close the file and dxpl */ + /* Close the file */ if(H5Fclose(file) < 0) FAIL_STACK_ERROR diff --git a/test/testcheck_version.sh.in b/test/testcheck_version.sh.in index 836170d..0c2c4cd 100644 --- a/test/testcheck_version.sh.in +++ b/test/testcheck_version.sh.in @@ -216,9 +216,9 @@ h5libsettings=../src/libhdf5.settings PURPOSE # Figure out library version numbers from the header file. -h5versmajor=`grep '#define H5_VERS_MAJOR' $srcdir/../src/H5public.h | cut -f2` -h5versminor=`grep '#define H5_VERS_MINOR' $srcdir/../src/H5public.h | cut -f2` -h5versrelease=`grep '#define H5_VERS_RELEASE' $srcdir/../src/H5public.h | cut -f2` +h5versmajor=`grep '#define H5_VERS_MAJOR' $srcdir/../src/H5public.h | awk '{print $3}'` +h5versminor=`grep '#define H5_VERS_MINOR' $srcdir/../src/H5public.h | awk '{print $3}'` +h5versrelease=`grep '#define H5_VERS_RELEASE' $srcdir/../src/H5public.h | awk '{print $3}'` DEBUGPRINT $h5versmajor.$h5versminor.$h5versrelease case "$h5versmajor$h5versminor$h5versrelease" in [0-9]*) # good. noop. diff --git a/test/trefer.c b/test/trefer.c index 15f9d64..12651c7 100644 --- a/test/trefer.c +++ b/test/trefer.c @@ -247,9 +247,9 @@ test_reference_params(void) /* Test parameters to H5Ropen_object */ dset2 = H5Ropen_object(&rbuf[0], H5I_INVALID_HID, H5I_INVALID_HID); - VERIFY(dset2, FAIL, "H5Ropen_object oapl_id"); + VERIFY(dset2, H5I_INVALID_HID, "H5Ropen_object oapl_id"); dset2 = H5Ropen_object(NULL, H5P_DEFAULT, dapl_id); - VERIFY(dset2, FAIL, "H5Ropen_object ref"); + VERIFY(dset2, H5I_INVALID_HID, "H5Ropen_object ref"); /* Test parameters to H5Ropen_region */ ret_id = H5Ropen_region(NULL, H5I_INVALID_HID, H5I_INVALID_HID); @@ -2258,7 +2258,7 @@ test_reference_compat_conv(void) /* Create a dataset with region reference datatype */ dataset = H5Dcreate2(fid1, "Dataset4", H5T_STD_REF_DSETREG, sid3, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT); - CHECK(dataset, FAIL, "H5Dcreate2"); + CHECK(dataset, H5I_INVALID_HID, "H5Dcreate2"); /* Select 6x6 hyperslab for first reference */ start[0] = 2; @@ -2316,11 +2316,11 @@ test_reference_compat_conv(void) /* Re-open the file */ fid1 = H5Fopen(FILE_REF_COMPAT, H5F_ACC_RDWR, H5P_DEFAULT); - CHECK(fid1, FAIL, "H5Fopen"); + CHECK(fid1, H5I_INVALID_HID, "H5Fopen"); /* Open the object reference dataset */ dataset = H5Dopen2(fid1, "/Dataset3", H5P_DEFAULT); - CHECK(dataset, FAIL, "H5Dopen2"); + CHECK(dataset, H5I_INVALID_HID, "H5Dopen2"); /* Read selection from disk */ ret = H5Dread(dataset, H5T_STD_REF, H5S_ALL, H5S_ALL, H5P_DEFAULT, rbuf_obj); @@ -2376,7 +2376,7 @@ test_reference_compat_conv(void) /* Open the dataset region reference dataset */ dataset = H5Dopen2(fid1, "/Dataset4", H5P_DEFAULT); - CHECK(ret, H5I_INVALID_HID, "H5Dopen2"); + CHECK(dataset, H5I_INVALID_HID, "H5Dopen2"); /* Read selection from disk */ ret = H5Dread(dataset, H5T_STD_REF, H5S_ALL, H5S_ALL, H5P_DEFAULT, rbuf_reg); diff --git a/test/tselect.c b/test/tselect.c index 492a917..aa0ab11 100644 --- a/test/tselect.c +++ b/test/tselect.c @@ -1666,10 +1666,10 @@ verify_select_hyper_contig_dr__run_test(const uint16_t *cube_buf, /**************************************************************** ** ** test_select_hyper_contig_dr__run_test(): Test H5S (dataspace) -** selection code with contiguous source and target having -** different ranks but the same shape. We have already -** tested H5Sselect_shape_same in isolation, so now we try to do -** I/O. +** selection code with contiguous source and target having +** different ranks but the same shape. We have already +** tested H5Sselect_shape_same in isolation, so now we try to do +** I/O. ** ****************************************************************/ static void @@ -6118,8 +6118,8 @@ test_select_hyper_chunk(hid_t fapl_plist, hid_t xfer_plist) */ tmpdata = data; for (j = 0; j < X; j++) - for (i = 0; i < Y; i++) - for (k = 0; k < Z; k++) + for (i = 0; i < Y; i++) + for (k = 0; k < Z; k++) *tmpdata++ = (short)((k+1)%256); /* @@ -6281,8 +6281,8 @@ test_select_hyper_chunk(hid_t fapl_plist, hid_t xfer_plist) tmpdata = data; tmpdata_out = data_out; for (j = 0; j < X; j++) - for (i = 0; i < Y; i++) - for (k = 0; k < Z; k++,tmpdata++,tmpdata_out++) { + for (i = 0; i < Y; i++) + for (k = 0; k < Z; k++,tmpdata++,tmpdata_out++) { if(*tmpdata!=*tmpdata_out) TestErrPrintf("Line %d: Error! j=%d, i=%d, k=%d, *tmpdata=%x, *tmpdata_out=%x\n",__LINE__,j,i,k,(unsigned)*tmpdata,(unsigned)*tmpdata_out); } /* end for */ @@ -6350,7 +6350,7 @@ test_select_point_chunk(void) */ tmpdata = data; for (i = 0; i < SPACE7_DIM1; i++) - for (j = 0; j < SPACE7_DIM1; j++) + for (j = 0; j < SPACE7_DIM1; j++) *tmpdata++ = ((i*SPACE7_DIM2)+j)%256; /* @@ -9388,15 +9388,15 @@ test_shape_same_dr__smoke_check_1(void) ** a "checker board" hyperslab as follows: ** ** * * - - * * - - * * -** * * - - * * - - * * -** - - * * - - * * - - -** - - * * - - * * - - ** * * - - * * - - * * -** * * - - * * - - * * -** - - * * - - * * - - -** - - * * - - * * - - +** - - * * - - * * - - +** - - * * - - * * - - +** * * - - * * - - * * +** * * - - * * - - * * +** - - * * - - * * - - +** - - * * - - * * - - +** * * - - * * - - * * ** * * - - * * - - * * -** * * - - * * - - * * ** ** where asterisks indicate selected elements, and dashes ** indicate unselected elements. @@ -12026,16 +12026,16 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(ret != FAIL) { /* In this case, rebuild_check should be TRUE. */ rebuild_check = H5Sselect_shape_same(sid_reg1, sid_reg_ori1); CHECK(rebuild_check, FALSE, "H5Sselect_shape_same"); - } /* end if */ + } /* For irregular hyperslab */ sid_irreg1 = H5Screate_simple(SPACERE1_RANK,dims1,NULL); @@ -12062,11 +12062,11 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_NO) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_IMPOSSIBLE) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } /* No need to do shape comparision */ @@ -12114,7 +12114,7 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); @@ -12123,7 +12123,7 @@ test_space_rebuild(void) /* In this case, rebuild_check should be TRUE. */ rebuild_check = H5Sselect_shape_same(sid_reg2, sid_reg_ori2); CHECK(rebuild_check, FALSE, "H5Sselect_shape_same"); - } /* end if */ + } /* 2-D irregular case */ sid_irreg2 = H5Screate_simple(SPACERE2_RANK,dims2,NULL); @@ -12155,11 +12155,11 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_NO) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_IMPOSSIBLE) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } /* No need to do shape comparision */ MESSAGE(7, ("Testing functionality to rebuild 3-D hyperslab selection\n")); @@ -12212,16 +12212,16 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(ret != FAIL) { /* In this case, rebuild_check should be TRUE. */ rebuild_check = H5Sselect_shape_same(sid_reg3, sid_reg_ori3); CHECK(rebuild_check, FALSE, "H5Sselect_shape_same"); - } /* end if */ + } sid_irreg3 = H5Screate_simple(SPACERE3_RANK,dims3,NULL); @@ -12258,11 +12258,11 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_NO) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_IMPOSSIBLE) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } /* No need to do shape comparision */ MESSAGE(7, ("Testing functionality to rebuild 4-D hyperslab selection\n")); @@ -12323,16 +12323,16 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(ret != FAIL) { /* In this case, rebuild_check should be TRUE. */ rebuild_check = H5Sselect_shape_same(sid_reg4, sid_reg_ori4); CHECK(rebuild_check, FALSE, "H5Sselect_shape_same"); - } /* end if */ + } /* Testing irregular selection */ sid_irreg4 = H5Screate_simple(SPACERE4_RANK,dims4,NULL); @@ -12380,11 +12380,11 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_NO) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_IMPOSSIBLE) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } /* No need to do shape comparision */ MESSAGE(7, ("Testing functionality to rebuild 5-D hyperslab selection\n")); @@ -12449,16 +12449,16 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(ret != FAIL) { /* In this case, rebuild_check should be TRUE. */ rebuild_check = H5Sselect_shape_same(sid_reg5, sid_reg_ori5); CHECK(rebuild_check, FALSE, "H5Sselect_shape_same"); - } /* end if */ + } sid_irreg5 = H5Screate_simple(SPACERE5_RANK,dims5,NULL); @@ -12511,11 +12511,11 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_NO) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_IMPOSSIBLE) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } /* No need to do shape comparision */ /* We use 5-D to test a special case with @@ -12558,11 +12558,11 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } /* No need to do shape comparision */ /* Adding some selections to make it real irregular */ @@ -12586,11 +12586,11 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_NO) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_IMPOSSIBLE) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } /* No need to do shape comparision */ /* Add more selections to make it regular again */ @@ -12614,11 +12614,11 @@ test_space_rebuild(void) if(rebuild_stat1 != H5S_DIMINFO_VALID_NO) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } if(rebuild_stat2 != H5S_DIMINFO_VALID_YES) { ret = FAIL; CHECK(ret,FAIL,"H5S_hyper_rebuild"); - } /* end if */ + } /* No need to do shape comparision */ H5Sclose(sid_reg1); @@ -2490,7 +2490,7 @@ driver_is_splitter_compatible(hid_t fapl_id) { H5FD_splitter_vfd_config_t vfd_config; hid_t split_fapl_id = H5I_INVALID_HID; - herr_t ret; + herr_t ret = SUCCEED; int ret_value = 0; split_fapl_id = H5Pcreate(H5P_FILE_ACCESS); @@ -2503,6 +2503,7 @@ driver_is_splitter_compatible(hid_t fapl_id) vfd_config.rw_fapl_id = H5P_DEFAULT; vfd_config.wo_fapl_id = fapl_id; HDstrncpy(vfd_config.wo_path, "nonesuch", H5FD_SPLITTER_PATH_MAX); + *vfd_config.log_file_path = '\0'; H5E_BEGIN_TRY { ret = H5Pset_fapl_splitter(split_fapl_id, &vfd_config); diff --git a/tools/src/misc/h5clear.c b/tools/src/misc/h5clear.c index 2c85e75..f95d1bc 100644 --- a/tools/src/misc/h5clear.c +++ b/tools/src/misc/h5clear.c @@ -101,8 +101,13 @@ static void usage(const char *prog) HDfprintf(stdout, " -s, --status Clear the status_flags field in the file's superblock\n"); HDfprintf(stdout, " -m, --image Remove the metadata cache image from the file\n"); HDfprintf(stdout, " --filesize Print the file's EOA and EOF\n"); - HDfprintf(stdout, " --increment=C Set the file's EOA to the maximum of (EOA, EOF) + C for the file <file_name>\n"); - HDfprintf(stdout, " C is >= 0; C is optional and will default to 1M when not set"); + HDfprintf(stdout, " --increment=C Set the file's EOA to the maximum of (EOA, EOF) + C for\n"); + HDfprintf(stdout, " the file <file_name>.\n"); + HDfprintf(stdout, " C is >= 0; C is optional and will default to 1M when not set.\n"); + HDfprintf(stdout, " This option helps to repair a crashed file where the stored EOA\n"); + HDfprintf(stdout, " in the superblock is different from the actual EOF.\n"); + HDfprintf(stdout, " The file’s EOA and EOF will be the same after applying\n"); + HDfprintf(stdout, " this option to the file.\n"); HDfprintf(stdout, "\n"); HDfprintf(stdout, "Examples of use:\n"); HDfprintf(stdout, "\n"); diff --git a/tools/test/misc/testfiles/h5clear_missing_file.ddl b/tools/test/misc/testfiles/h5clear_missing_file.ddl index 32dd549..c4d21c9 100644 --- a/tools/test/misc/testfiles/h5clear_missing_file.ddl +++ b/tools/test/misc/testfiles/h5clear_missing_file.ddl @@ -5,8 +5,14 @@ usage: h5clear [OPTIONS] file_name -s, --status Clear the status_flags field in the file's superblock -m, --image Remove the metadata cache image from the file --filesize Print the file's EOA and EOF - --increment=C Set the file's EOA to the maximum of (EOA, EOF) + C for the file <file_name> - C is >= 0; C is optional and will default to 1M when not set + --increment=C Set the file's EOA to the maximum of (EOA, EOF) + C for + the file <file_name>. + C is >= 0; C is optional and will default to 1M when not set. + This option helps to repair a crashed file where the stored EOA + in the superblock is different from the actual EOF. + The file’s EOA and EOF will be the same after applying + this option to the file. + Examples of use: h5clear -s file_name diff --git a/tools/test/misc/testfiles/h5clear_usage.ddl b/tools/test/misc/testfiles/h5clear_usage.ddl index 32dd549..c4d21c9 100644 --- a/tools/test/misc/testfiles/h5clear_usage.ddl +++ b/tools/test/misc/testfiles/h5clear_usage.ddl @@ -5,8 +5,14 @@ usage: h5clear [OPTIONS] file_name -s, --status Clear the status_flags field in the file's superblock -m, --image Remove the metadata cache image from the file --filesize Print the file's EOA and EOF - --increment=C Set the file's EOA to the maximum of (EOA, EOF) + C for the file <file_name> - C is >= 0; C is optional and will default to 1M when not set + --increment=C Set the file's EOA to the maximum of (EOA, EOF) + C for + the file <file_name>. + C is >= 0; C is optional and will default to 1M when not set. + This option helps to repair a crashed file where the stored EOA + in the superblock is different from the actual EOF. + The file’s EOA and EOF will be the same after applying + this option to the file. + Examples of use: h5clear -s file_name |