diff options
| -rw-r--r-- | COPYING | 43 | ||||
| -rw-r--r-- | release_docs/RELEASE.txt | 11 | ||||
| -rw-r--r-- | src/CMakeLists.txt | 12 | ||||
| -rw-r--r-- | src/H5detect.c | 860 | ||||
| -rw-r--r-- | src/H5make_libsettings.c | 260 | ||||
| -rw-r--r-- | src/Makefile.am | 4 |
6 files changed, 547 insertions, 643 deletions
@@ -3,7 +3,7 @@ HDF5 (Hierarchical Data Format 5) Software Library and Utilities ----------------------------------------------------------------------------- HDF5 (Hierarchical Data Format 5) Software Library and Utilities -Copyright (c) 2006, The HDF Group. +Copyright (c) 2006-2018, The HDF Group. NCSA HDF5 (Hierarchical Data Format 5) Software Library and Utilities Copyright (c) 1998-2006, The Board of Trustees of the University of Illinois. @@ -21,27 +21,27 @@ provided that the following conditions are met: this list of conditions, and the following disclaimer in the documentation and/or materials provided with the distribution. -3. In addition, redistributions of modified forms of the source or binary - code must carry prominent notices stating that the original code was - changed and the date of the change. - -4. All publications or advertising materials mentioning features or use of - this software are asked, but not required, to acknowledge that it was - developed by The HDF Group and by the National Center for Supercomputing - Applications at the University of Illinois at Urbana-Champaign and - credit the contributors. - -5. Neither the name of The HDF Group, the name of the University, nor the +3. Neither the name of The HDF Group, the name of the University, nor the name of any Contributor may be used to endorse or promote products derived from this software without specific prior written permission from The HDF Group, the University, or the Contributor, respectively. DISCLAIMER: THIS SOFTWARE IS PROVIDED BY THE HDF GROUP AND THE CONTRIBUTORS -"AS IS" WITH NO WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. In no -event shall The HDF Group or the Contributors be liable for any damages -suffered by the users arising out of the use of this software, even if -advised of the possibility of such damage. +"AS IS" WITH NO WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. IN NO +EVENT SHALL THE HDF GROUP OR THE CONTRIBUTORS BE LIABLE FOR ANY DAMAGES +SUFFERED BY THE USERS ARISING OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +You are under no obligation whatsoever to provide any bug fixes, patches, or +upgrades to the features, functionality or performance of the source code +("Enhancements") to anyone; however, if you choose to make your Enhancements +available either publicly, or directly to The HDF Group, without imposing a +separate written license agreement for such Enhancements, then you hereby +grant the following license: a non-exclusive, royalty-free perpetual license +to install, use, modify, prepare derivative works, incorporate into other +computer software, distribute, and sublicense such enhancements or derivative +works thereof, in binary and source code form. ----------------------------------------------------------------------------- ----------------------------------------------------------------------------- @@ -55,9 +55,9 @@ http://support.hdfgroup.org/ftp/HDF5/releases/COPYING_LBNL_HDF5. ----------------------------------------------------------------------------- Contributors: National Center for Supercomputing Applications (NCSA) at -the University of Illinois, Fortner Software, Unidata Program Center (netCDF), -The Independent JPEG Group (JPEG), Jean-loup Gailly and Mark Adler (gzip), -and Digital Equipment Corporation (DEC). +the University of Illinois, Fortner Software, Unidata Program Center +(netCDF), The Independent JPEG Group (JPEG), Jean-loup Gailly and Mark Adler +(gzip), and Digital Equipment Corporation (DEC). ----------------------------------------------------------------------------- @@ -98,8 +98,9 @@ and/or accompanying materials: ----------------------------------------------------------------------------- HDF5 is available with the SZIP compression library but SZIP is not part -of HDF5 and has separate copyright and license terms. See “Szip Compression -in HDF Products” (https://support.hdfgroup.org/doc_resource/SZIP/) for further details. +of HDF5 and has separate copyright and license terms. See SZIP Compression +in HDF Products (www.hdfgroup.org/doc_resource/SZIP/) for further details. ----------------------------------------------------------------------------- + diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt index 5150349..c8c7d5c 100644 --- a/release_docs/RELEASE.txt +++ b/release_docs/RELEASE.txt @@ -148,7 +148,7 @@ New Features Java Library: ---------------- - JNI native library dependencies - + The build for the hdf5_java native library used the wrong hdf5 target library for CMake builds. Correcting the hdf5_java library to build with the shared hdf5 library required testing @@ -209,6 +209,15 @@ Bug Fixes since HDF5-1.10.3 release Library ------- + - Allow H5detect and H5make_libsettings to take a file as an argument. + + Rather than only writing to stdout, add a command argument to name + the file that H5detect and H5make_libsettings will use for output. + Without an argument, stdout is still used, so backwards compatibility + is maintained. + + (ADB - 2018/09/05, HDFFV-9059) + - A bug was discovered in the parallel library where an application would hang if a collective read/write of a chunked dataset occurred when collective metadata reads were enabled and some of the ranks diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 3c5526f..ee06f06 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -854,7 +854,7 @@ endif () # specific type checks inside #----------------------------------------------------------------------------- add_executable (H5detect ${HDF5_SRC_DIR}/H5detect.c) -target_include_directories(H5detect PRIVATE "${HDF5_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>") +target_include_directories(H5detect PRIVATE "${HDF5_SRC_DIR};${HDF5_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>") target_compile_definitions(H5detect PUBLIC ${HDF_EXTRA_C_FLAGS} ${HDF_EXTRA_FLAGS}) TARGET_C_PROPERTIES (H5detect STATIC) target_link_libraries (H5detect @@ -865,12 +865,12 @@ target_link_libraries (H5detect add_custom_command ( OUTPUT ${HDF5_BINARY_DIR}/H5Tinit.c COMMAND $<TARGET_FILE:H5detect> - ARGS > ${HDF5_BINARY_DIR}/H5Tinit.c + ARGS ${HDF5_BINARY_DIR}/H5Tinit.c DEPENDS H5detect ) add_executable (H5make_libsettings ${HDF5_SRC_DIR}/H5make_libsettings.c) -target_include_directories(H5make_libsettings PRIVATE "${HDF5_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>") +target_include_directories(H5make_libsettings PRIVATE "${HDF5_SRC_DIR};${HDF5_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>") target_compile_definitions(H5make_libsettings PUBLIC ${HDF_EXTRA_C_FLAGS} ${HDF_EXTRA_FLAGS}) TARGET_C_PROPERTIES (H5make_libsettings STATIC) target_link_libraries (H5make_libsettings @@ -881,7 +881,7 @@ target_link_libraries (H5make_libsettings add_custom_command ( OUTPUT ${HDF5_BINARY_DIR}/H5lib_settings.c COMMAND $<TARGET_FILE:H5make_libsettings> - ARGS > ${HDF5_BINARY_DIR}/H5lib_settings.c + ARGS ${HDF5_BINARY_DIR}/H5lib_settings.c DEPENDS H5make_libsettings WORKING_DIRECTORY ${HDF5_BINARY_DIR} ) @@ -925,14 +925,14 @@ if (BUILD_SHARED_LIBS) add_custom_command ( OUTPUT ${HDF5_BINARY_DIR}/shared/H5Tinit.c COMMAND $<TARGET_FILE:H5detect> - ARGS > ${HDF5_BINARY_DIR}/shared/H5Tinit.c + ARGS ${HDF5_BINARY_DIR}/shared/H5Tinit.c DEPENDS H5detect WORKING_DIRECTORY ${HDF5_BINARY_DIR}/shared ) add_custom_command ( OUTPUT ${HDF5_BINARY_DIR}/shared/H5lib_settings.c COMMAND $<TARGET_FILE:H5make_libsettings> - ARGS > ${HDF5_BINARY_DIR}/shared/H5lib_settings.c + ARGS ${HDF5_BINARY_DIR}/shared/H5lib_settings.c DEPENDS H5make_libsettings WORKING_DIRECTORY ${HDF5_BINARY_DIR} ) diff --git a/src/H5detect.c b/src/H5detect.c index 2d33a3d..aac58de 100644 --- a/src/H5detect.c +++ b/src/H5detect.c @@ -26,11 +26,6 @@ static const char *FileHeader = "\n\ * help@hdfgroup.org. *\n\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *"; /* - * - * Created: H5detect.c - * 10 Aug 1997 - * Robb Matzke - * * Purpose: This code was borrowed heavily from the `detect.c' * program in the AIO distribution from Lawrence * Livermore National Laboratory. @@ -44,9 +39,6 @@ static const char *FileHeader = "\n\ * features which aren't available. We're not * running on a Vax or other machine with mixed * endianness. - * - * Modifications: - * *------------------------------------------------------------------------- */ #undef NDEBUG @@ -117,6 +109,8 @@ typedef struct malign_t { unsigned int comp_align; /* alignment for structure */ } malign_t; +FILE *rawoutstream = NULL; + /* global variables types detection code */ H5_GCC_DIAG_OFF(larger-than=) static detected_t d_g[MAXDETECT]; @@ -143,9 +137,9 @@ static void detect_C99_integers32(void); static void detect_C99_integers64(void); static void detect_alignments(void); static unsigned int align_g[] = {1, 2, 4, 8, 16}; -static int align_status_g = 0; /* ALIGNMENT Signal Status */ +static int align_status_g = 0; /* ALIGNMENT Signal Status */ static int sigbus_handler_called_g = 0; /* how many times called */ -static int sigsegv_handler_called_g = 0;/* how many times called */ +static int sigsegv_handler_called_g = 0; /* how many times called */ static int sigill_handler_called_g = 0; /* how many times called */ static int signal_handler_tested_g = 0; /* how many times tested */ #if defined(H5SETJMP) && defined(H5_HAVE_SIGNAL) @@ -157,17 +151,11 @@ static H5JMP_BUF jbuf_g; /*------------------------------------------------------------------------- - * Function: precision + * Function: precision * - * Purpose: Determine the precision and offset. + * Purpose: Determine the precision and offset. * * Return: void - * - * Programmer: Robb Matzke - * Thursday, June 18, 1998 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void @@ -189,7 +177,8 @@ precision (detected_t *d) /*void*/; d->precision = 8 * (d->size - n); d->offset = 0; - } else if (d->perm[d->size - 1] < 0) { + } + else if (d->perm[d->size - 1] < 0) { /* * Higher addresses are padded. */ @@ -197,14 +186,16 @@ precision (detected_t *d) /*void*/; d->precision = 8 * (d->size - n); d->offset = 8 * n; - } else { + } + else { /* * No padding. */ d->precision = 8 * d->size; d->offset = 0; } - } else { + } + else { /* A floating point */ d->offset = MIN3(d->mpos, d->epos, d->sign); d->precision = d->msize + d->esize + 1; @@ -213,21 +204,17 @@ precision (detected_t *d) /*------------------------------------------------------------------------- - * Function: DETECT_I/DETECT_BYTE + * Function: DETECT_I/DETECT_BYTE * - * Purpose: These macro takes a type like `int' and a base name like - * `nati' and detects the byte order. The VAR is used to - * construct the names of the C variables defined. + * Purpose: These macro takes a type like `int' and a base name like + * `nati' and detects the byte order. The VAR is used to + * construct the names of the C variables defined. * - * DETECT_I is used for types that are larger than one byte, - * DETECT_BYTE is used for types that are exactly one byte. + * DETECT_I is used for types that are larger than one byte, + * DETECT_BYTE is used for types that are exactly one byte. * * Return: void * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 12 1996 - * * Modifications: * * Robb Matzke, 4 Nov 1996 @@ -244,7 +231,7 @@ precision (detected_t *d) * * Neil Fortner, 6 Sep 2013 * Split macro into DETECT_I and DETECT_BYTE macros, extracted - * common cod einto DETECT_I_BYTE_CORE. This was done to remove + * common code into DETECT_I_BYTE_CORE. This was done to remove * "will never be executed" warnings. * *------------------------------------------------------------------------- @@ -291,20 +278,13 @@ precision (detected_t *d) /*------------------------------------------------------------------------- - * Function: DETECT_F - * - * Purpose: This macro takes a floating point type like `double' and - * a base name like `natd' and detects byte order, mantissa - * location, exponent location, sign bit location, presence or - * absence of implicit mantissa bit, and exponent bias and - * initializes a detected_t structure with those properties. - * - * Return: void - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 12 1996 + * Function: DETECT_F * + * Purpose: This macro takes a floating point type like `double' and + * a base name like `natd' and detects byte order, mantissa + * location, exponent location, sign bit location, presence or + * absence of implicit mantissa bit, and exponent bias and + * initializes a detected_t structure with those properties. *------------------------------------------------------------------------- */ #define DETECT_F(TYPE,VAR,INFO) { \ @@ -395,20 +375,13 @@ precision (detected_t *d) /*------------------------------------------------------------------------- - * Function: DETECT_M + * Function: DETECT_M * - * Purpose: This macro takes only miscellaneous structures or pointer - * (pointer, hvl_t, hobj_ref_t, hdset_reg_ref_t). It - * constructs the names and decides the alignment in structure. + * Purpose: This macro takes only miscellaneous structures or pointer + * (pointer, hvl_t, hobj_ref_t, hdset_reg_ref_t). It + * constructs the names and decides the alignment in structure. * * Return: void - * - * Programmer: Raymond Lu - * slu@ncsa.uiuc.edu - * Dec 9, 2002 - * - * Modifications: - * *------------------------------------------------------------------------- */ #define DETECT_M(TYPE,VAR,INFO) { \ @@ -438,29 +411,29 @@ precision (detected_t *d) _buf = (char*)HDmalloc(sizeof(TYPE) + align_g[NELMTS(align_g) - 1]); \ if(H5SETJMP(jbuf_g)) _ano++; \ if(_ano < NELMTS(align_g)) { \ - *((TYPE*)(_buf+align_g[_ano])) = _val; /*possible SIGBUS or SEGSEGV*/ \ - _val2 = *((TYPE*)(_buf+align_g[_ano])); /*possible SIGBUS or SEGSEGV*/\ - /* Cray Check: This section helps detect alignment on Cray's */ \ + *((TYPE*)(_buf+align_g[_ano])) = _val; /*possible SIGBUS or SEGSEGV*/ \ + _val2 = *((TYPE*)(_buf+align_g[_ano])); /*possible SIGBUS or SEGSEGV*/\ + /* Cray Check: This section helps detect alignment on Cray's */ \ /* vector machines (like the SV1) which mask off */ \ - /* pointer values when pointing to non-word aligned */ \ - /* locations with pointers that are supposed to be */ \ - /* word aligned. -QAK */ \ - HDmemset(_buf, 0xff, sizeof(TYPE)+align_g[NELMTS(align_g)-1]); \ - /*How to handle VAX types?*/ \ - if(INFO.perm[0]) /* Big-Endian */ \ - HDmemcpy(_buf+align_g[_ano]+(INFO.size-((INFO.offset+INFO.precision)/8)),((char *)&_val)+(INFO.size-((INFO.offset+INFO.precision)/8)),(size_t)(INFO.precision/8)); \ - else /* Little-Endian */ \ - HDmemcpy(_buf+align_g[_ano]+(INFO.offset/8),((char *)&_val)+(INFO.offset/8),(size_t)(INFO.precision/8)); \ - _val2 = *((TYPE*)(_buf+align_g[_ano])); \ - H5_GCC_DIAG_OFF(float-equal) \ - if(_val!=_val2) \ - H5LONGJMP(jbuf_g, 1); \ - H5_GCC_DIAG_ON(float-equal) \ - /* End Cray Check */ \ - (INFO.align)=align_g[_ano]; \ + /* pointer values when pointing to non-word aligned */ \ + /* locations with pointers that are supposed to be */ \ + /* word aligned. -QAK */ \ + HDmemset(_buf, 0xff, sizeof(TYPE)+align_g[NELMTS(align_g)-1]); \ + /*How to handle VAX types?*/ \ + if(INFO.perm[0]) /* Big-Endian */ \ + HDmemcpy(_buf+align_g[_ano]+(INFO.size-((INFO.offset+INFO.precision)/8)),((char *)&_val)+(INFO.size-((INFO.offset+INFO.precision)/8)),(size_t)(INFO.precision/8)); \ + else /* Little-Endian */ \ + HDmemcpy(_buf+align_g[_ano]+(INFO.offset/8),((char *)&_val)+(INFO.offset/8),(size_t)(INFO.precision/8)); \ + _val2 = *((TYPE*)(_buf+align_g[_ano])); \ + H5_GCC_DIAG_OFF(float-equal) \ + if(_val!=_val2) \ + H5LONGJMP(jbuf_g, 1); \ + H5_GCC_DIAG_ON(float-equal) \ + /* End Cray Check */ \ + (INFO.align)=align_g[_ano]; \ } else { \ (INFO.align)=0; \ - fprintf(stderr, "unable to calculate alignment for %s\n", #TYPE); \ + fprintf(stderr, "unable to calculate alignment for %s\n", #TYPE); \ } \ HDfree(_buf); \ HDsignal(SIGBUS, _handler); /*restore original handler*/ \ @@ -477,20 +450,14 @@ precision (detected_t *d) #if defined(H5LONGJMP) && defined(H5_HAVE_SIGNAL) /*------------------------------------------------------------------------- - * Function: sigsegv_handler + * Function: sigsegv_handler * - * Purpose: Handler for SIGSEGV. We use signal() instead of sigaction() - * because it's more portable to non-Posix systems. Although - * it's not nearly as nice to work with, it does the job for - * this simple stuff. + * Purpose: Handler for SIGSEGV. We use signal() instead of sigaction() + * because it's more portable to non-Posix systems. Although + * it's not nearly as nice to work with, it does the job for + * this simple stuff. * * Return: Returns via H5LONGJMP to jbuf_g. - * - * Programmer: Robb Matzke - * Thursday, March 18, 1999 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void @@ -515,20 +482,14 @@ sigsegv_handler(int H5_ATTR_UNUSED signo) #if defined(H5LONGJMP) && defined(H5_HAVE_SIGNAL) /*------------------------------------------------------------------------- - * Function: sigbus_handler + * Function: sigbus_handler * - * Purpose: Handler for SIGBUS. We use signal() instead of sigaction() - * because it's more portable to non-Posix systems. Although - * it's not nearly as nice to work with, it does the job for - * this simple stuff. + * Purpose: Handler for SIGBUS. We use signal() instead of sigaction() + * because it's more portable to non-Posix systems. Although + * it's not nearly as nice to work with, it does the job for + * this simple stuff. * * Return: Returns via H5LONGJMP to jbuf_g. - * - * Programmer: Robb Matzke - * Thursday, March 18, 1999 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void @@ -553,18 +514,14 @@ sigbus_handler(int H5_ATTR_UNUSED signo) #if defined(H5LONGJMP) && defined(H5_HAVE_SIGNAL) /*------------------------------------------------------------------------- - * Function: sigill_handler + * Function: sigill_handler * - * Purpose: Handler for SIGILL. We use signal() instead of sigaction() - * because it's more portable to non-Posix systems. Although - * it's not nearly as nice to work with, it does the job for - * this simple stuff. + * Purpose: Handler for SIGILL. We use signal() instead of sigaction() + * because it's more portable to non-Posix systems. Although + * it's not nearly as nice to work with, it does the job for + * this simple stuff. * * Return: Returns via H5LONGJMP to jbuf_g. - * - * Programmer: Raymond Lu - * 28 October 2013 - * *------------------------------------------------------------------------- */ static void @@ -588,18 +545,11 @@ sigill_handler(int H5_ATTR_UNUSED signo) /*------------------------------------------------------------------------- - * Function: print_results + * Function: print_results * - * Purpose: Prints information about the detected data types. + * Purpose: Prints information about the detected data types. * * Return: void - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 14, 1996 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void @@ -609,7 +559,7 @@ print_results(int nd, detected_t *d, int na, malign_t *misc_align) int i, j; /* Include files */ - printf("\ + fprintf(rawoutstream, "\ /****************/\n\ /* Module Setup */\n\ /****************/\n\ @@ -662,7 +612,7 @@ print_results(int nd, detected_t *d, int na, malign_t *misc_align) /*********************/\n\ \n\ \n"); - printf("\n\ + fprintf(rawoutstream, "\n\ /*******************/\n\ /* Local Variables */\n\ /*******************/\n\ @@ -670,7 +620,7 @@ print_results(int nd, detected_t *d, int na, malign_t *misc_align) /* The interface initialization function */ - printf("\n\ + fprintf(rawoutstream, "\n\ \n\ /*-------------------------------------------------------------------------\n\ * Function: H5T__init_native\n\ @@ -713,12 +663,12 @@ H5T__init_native(void)\n\ } /* Print a comment to describe this section of definitions. */ - printf("\n /*\n"); + fprintf(rawoutstream, "\n /*\n"); iprint(d+i); - printf(" */\n"); + fprintf(rawoutstream, " */\n"); /* The part common to fixed and floating types */ - printf("\ + fprintf(rawoutstream, "\ if(NULL == (dt = H5T__alloc()))\n\ HGOTO_ERROR(H5E_DATATYPE, H5E_NOSPACE, FAIL, \"datatype allocation failed\")\n\ dt->shared->state = H5T_STATE_IMMUTABLE;\n\ @@ -728,16 +678,16 @@ H5T__init_native(void)\n\ d[i].size); /*size */ if(byte_order==-1) - printf("\ + fprintf(rawoutstream, "\ dt->shared->u.atomic.order = H5T_ORDER_VAX;\n"); else if(byte_order==0) - printf("\ + fprintf(rawoutstream, "\ dt->shared->u.atomic.order = H5T_ORDER_LE;\n"); else - printf("\ + fprintf(rawoutstream, "\ dt->shared->u.atomic.order = H5T_ORDER_BE;\n"); - printf("\ + fprintf(rawoutstream, "\ dt->shared->u.atomic.offset = %d;\n\ dt->shared->u.atomic.prec = %d;\n\ dt->shared->u.atomic.lsb_pad = H5T_PAD_ZERO;\n\ @@ -748,12 +698,13 @@ H5T__init_native(void)\n\ if (0 == d[i].msize) { /* The part unique to fixed point types */ - printf("\ + fprintf(rawoutstream, "\ dt->shared->u.atomic.u.i.sign = H5T_SGN_%s;\n", d[i].sign ? "2" : "NONE"); - } else { + } + else { /* The part unique to floating point types */ - printf("\ + fprintf(rawoutstream, "\ dt->shared->u.atomic.u.f.sign = %d;\n\ dt->shared->u.atomic.u.f.epos = %d;\n\ dt->shared->u.atomic.u.f.esize = %d;\n\ @@ -772,11 +723,11 @@ H5T__init_native(void)\n\ } /* Atomize the type */ - printf("\ + fprintf(rawoutstream, "\ if((H5T_NATIVE_%s_g = H5I_register(H5I_DATATYPE, dt, FALSE)) < 0)\n\ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, \"can't register ID for built-in datatype\")\n", d[i].varname); - printf(" H5T_NATIVE_%s_ALIGN_g = %lu;\n", + fprintf(rawoutstream, " H5T_NATIVE_%s_ALIGN_g = %lu;\n", d[i].varname, (unsigned long)(d[i].align)); /* Variables for alignment of compound datatype */ @@ -784,28 +735,29 @@ H5T__init_native(void)\n\ !HDstrcmp(d[i].varname, "INT") || !HDstrcmp(d[i].varname, "LONG") || !HDstrcmp(d[i].varname, "LLONG") || !HDstrcmp(d[i].varname, "FLOAT") || !HDstrcmp(d[i].varname, "DOUBLE") || !HDstrcmp(d[i].varname, "LDOUBLE")) { - printf(" H5T_NATIVE_%s_COMP_ALIGN_g = %lu;\n", + fprintf(rawoutstream, " H5T_NATIVE_%s_COMP_ALIGN_g = %lu;\n", d[i].varname, (unsigned long)(d[i].comp_align)); } } /* Consider VAX a little-endian machine */ if(byte_order==0 || byte_order==-1) { - printf("\n\ + fprintf(rawoutstream, "\n\ /* Set the native order for this machine */\n\ H5T_native_order_g = H5T_ORDER_%s;\n", "LE"); - } else { - printf("\n\ + } + else { + fprintf(rawoutstream, "\n\ /* Set the native order for this machine */\n\ H5T_native_order_g = H5T_ORDER_%s;\n", "BE"); } /* Structure alignment for pointers, hvl_t, hobj_ref_t, hdset_reg_ref_t */ - printf("\n /* Structure alignment for pointers, hvl_t, hobj_ref_t, hdset_reg_ref_t */\n"); + fprintf(rawoutstream, "\n /* Structure alignment for pointers, hvl_t, hobj_ref_t, hdset_reg_ref_t */\n"); for(j=0; j<na; j++) - printf(" H5T_%s_COMP_ALIGN_g = %lu;\n", misc_align[j].name, (unsigned long)(misc_align[j].comp_align)); + fprintf(rawoutstream, " H5T_%s_COMP_ALIGN_g = %lu;\n", misc_align[j].name, (unsigned long)(misc_align[j].comp_align)); - printf("\ + fprintf(rawoutstream, "\ \n\ done:\n\ if(ret_value < 0) {\n\ @@ -818,73 +770,66 @@ done:\n\ FUNC_LEAVE_NOAPI(ret_value);\n} /* end H5T__init_native() */\n"); /* Print the ALIGNMENT and signal-handling status as comments */ - printf("\n" + fprintf(rawoutstream, "\n" "/****************************************/\n" "/* ALIGNMENT and signal-handling status */\n" "/****************************************/\n"); if (align_status_g & STA_NoALIGNMENT) - printf("/* ALIGNAMENT test is not available */\n"); + fprintf(rawoutstream, "/* ALIGNAMENT test is not available */\n"); if (align_status_g & STA_NoHandlerVerify) - printf("/* Signal handlers verify test is not available */\n"); + fprintf(rawoutstream, "/* Signal handlers verify test is not available */\n"); /* The following is available in H5pubconf.h. Printing them here for */ /* convenience. */ #ifdef H5_HAVE_SIGNAL - printf("/* Signal() support: yes */\n"); + fprintf(rawoutstream, "/* Signal() support: yes */\n"); #else - printf("/* Signal() support: no */\n"); + fprintf(rawoutstream, "/* Signal() support: no */\n"); #endif #ifdef H5_HAVE_SETJMP - printf("/* setjmp() support: yes */\n"); + fprintf(rawoutstream, "/* setjmp() support: yes */\n"); #else - printf("/* setjmp() support: no */\n"); + fprintf(rawoutstream, "/* setjmp() support: no */\n"); #endif #ifdef H5_HAVE_LONGJMP - printf("/* longjmp() support: yes */\n"); + fprintf(rawoutstream, "/* longjmp() support: yes */\n"); #else - printf("/* longjmp() support: no */\n"); + fprintf(rawoutstream, "/* longjmp() support: no */\n"); #endif #ifdef H5_HAVE_SIGSETJMP - printf("/* sigsetjmp() support: yes */\n"); + fprintf(rawoutstream, "/* sigsetjmp() support: yes */\n"); #else - printf("/* sigsetjmp() support: no */\n"); + fprintf(rawoutstream, "/* sigsetjmp() support: no */\n"); #endif #ifdef H5_HAVE_SIGLONGJMP - printf("/* siglongjmp() support: yes */\n"); + fprintf(rawoutstream, "/* siglongjmp() support: yes */\n"); #else - printf("/* siglongjmp() support: no */\n"); + fprintf(rawoutstream, "/* siglongjmp() support: no */\n"); #endif #ifdef H5_HAVE_SIGPROCMASK - printf("/* sigprocmask() support: yes */\n"); + fprintf(rawoutstream, "/* sigprocmask() support: yes */\n"); #else - printf("/* sigprocmask() support: no */\n"); + fprintf(rawoutstream, "/* sigprocmask() support: no */\n"); #endif /* Print the statics of signal handlers called for debugging */ - printf("\n" + fprintf(rawoutstream, "\n" "/******************************/\n" "/* signal handlers statistics */\n" "/******************************/\n"); - printf("/* signal_handlers tested: %d times */\n", signal_handler_tested_g); - printf("/* sigbus_handler called: %d times */\n", sigbus_handler_called_g); - printf("/* sigsegv_handler called: %d times */\n", sigsegv_handler_called_g); - printf("/* sigill_handler called: %d times */\n", sigill_handler_called_g); + fprintf(rawoutstream, "/* signal_handlers tested: %d times */\n", signal_handler_tested_g); + fprintf(rawoutstream, "/* sigbus_handler called: %d times */\n", sigbus_handler_called_g); + fprintf(rawoutstream, "/* sigsegv_handler called: %d times */\n", sigsegv_handler_called_g); + fprintf(rawoutstream, "/* sigill_handler called: %d times */\n", sigill_handler_called_g); } /* end print_results() */ /*------------------------------------------------------------------------- - * Function: iprint + * Function: iprint * - * Purpose: Prints information about the fields of a floating point - * format. + * Purpose: Prints information about the fields of a floating point format. * * Return: void - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 13, 1996 - * - * Modifications: - * + *------------------------------------------------------------------------- */ static void @@ -897,41 +842,48 @@ iprint(detected_t *d) /* * Print the byte ordering above the bit fields. */ - printf(" * "); + fprintf(rawoutstream, " * "); for (i = MIN(pass * 4 + 3, d->size - 1); i >= pass * 4; --i) { - printf("%4d", d->perm[i]); - if (i > pass * 4) HDfputs(" ", stdout); - if (!i) break; + fprintf(rawoutstream, "%4d", d->perm[i]); + if (i > pass * 4) + HDfputs(" ", stdout); + if (!i) + break; } /* * Print the bit fields */ - printf("\n * "); + fprintf(rawoutstream, "\n * "); for (i = MIN(pass * 4 + 3, d->size - 1), k = MIN(pass * 32 + 31, 8 * d->size - 1); i >= pass * 4; --i) { unsigned int j; for (j = 8; j > 0; --j) { if (k == d->sign && d->msize) { - HDputchar('S'); - } else if (k >= d->epos && k < d->epos + d->esize) { - HDputchar('E'); - } else if (k >= d->mpos && k < d->mpos + d->msize) { - HDputchar('M'); - } else if (d->msize) { - HDputchar('?'); /*unknown floating point bit */ - } else if (d->sign) { - HDputchar('I'); - } else { - HDputchar('U'); + HDfputc('S', rawoutstream); + } + else if (k >= d->epos && k < d->epos + d->esize) { + HDfputc('E', rawoutstream); + } + else if (k >= d->mpos && k < d->mpos + d->msize) { + HDfputc('M', rawoutstream); + } + else if (d->msize) { + HDfputc('?', rawoutstream); /*unknown floating point bit */ + } + else if (d->sign) { + HDfputc('I', rawoutstream); + } + else { + HDfputc('U', rawoutstream); } --k; } - if (i > pass * 4) HDputchar(' '); + if (i > pass * 4) HDfputc(' ', rawoutstream); if (!i) break; } - HDputchar('\n'); + HDfputc('\n', rawoutstream); if (!pass) break; } @@ -939,41 +891,35 @@ iprint(detected_t *d) * Is there an implicit bit in the mantissa. */ if (d->msize) { - printf(" * Implicit bit? %s\n", d->imp ? "yes" : "no"); + fprintf(rawoutstream, " * Implicit bit? %s\n", d->imp ? "yes" : "no"); } /* * Alignment */ if (0 == d->align) { - printf(" * Alignment: NOT CALCULATED\n"); - } else if (1 == d->align) { - printf(" * Alignment: none\n"); - } else { - printf(" * Alignment: %lu\n", (unsigned long) (d->align)); + fprintf(rawoutstream, " * Alignment: NOT CALCULATED\n"); + } + else if (1 == d->align) { + fprintf(rawoutstream, " * Alignment: none\n"); + } + else { + fprintf(rawoutstream, " * Alignment: %lu\n", (unsigned long) (d->align)); } } /*------------------------------------------------------------------------- - * Function: byte_cmp + * Function: byte_cmp * - * Purpose: Compares two chunks of memory A and B and returns the - * byte index into those arrays of the first byte that - * differs between A and B. Ignores differences where the - * corresponding bit in pad_mask is set to 0. + * Purpose: Compares two chunks of memory A and B and returns the + * byte index into those arrays of the first byte that + * differs between A and B. Ignores differences where the + * corresponding bit in pad_mask is set to 0. * * Return: Success: Index of differing byte. - * - * Failure: -1 if all bytes are the same. - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 12, 1996 - * - * Modifications: - * + * Failure: -1 if all bytes are the same. *------------------------------------------------------------------------- */ static int @@ -992,13 +938,13 @@ byte_cmp(int n, const void *_a, const void *_b, const unsigned char *pad_mask) /*------------------------------------------------------------------------- - * Function: bit_cmp + * Function: bit_cmp * - * Purpose: Compares two bit vectors and returns the index for the - * first bit that differs between the two vectors. The - * size of the vector is NBYTES. PERM is a mapping from - * actual order to little endian. Ignores differences where - * the corresponding bit in pad_mask is set to 0. + * Purpose: Compares two bit vectors and returns the index for the + * first bit that differs between the two vectors. The + * size of the vector is NBYTES. PERM is a mapping from + * actual order to little endian. Ignores differences where + * the corresponding bit in pad_mask is set to 0. * * Return: Index of first differing bit. * @@ -1033,24 +979,17 @@ bit_cmp(unsigned int nbytes, int *perm, void *_a, void *_b, /*------------------------------------------------------------------------- - * Function: fix_order + * Function: fix_order * - * Purpose: Given an array PERM with elements FIRST through LAST - * initialized with zero origin byte numbers, this function - * creates a permutation vector that maps the actual order - * of a floating point number to little-endian. + * Purpose: Given an array PERM with elements FIRST through LAST + * initialized with zero origin byte numbers, this function + * creates a permutation vector that maps the actual order + * of a floating point number to little-endian. * - * This function assumes that the mantissa byte ordering - * implies the total ordering. + * This function assumes that the mantissa byte ordering + * implies the total ordering. * * Return: void - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 13, 1996 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void @@ -1059,60 +998,69 @@ fix_order(int n, int last, int *perm, const char **mesg) int i; if (last > 1) { - /* - * We have at least three points to consider. - */ - if (perm[last] < perm[last - 1] && perm[last - 1] < perm[last - 2]) { /* - * Little endian. - */ - if (mesg) *mesg = "Little-endian"; - for (i = 0; i < n; i++) perm[i] = i; + * We have at least three points to consider. + */ + if (perm[last] < perm[last - 1] && perm[last - 1] < perm[last - 2]) { + /* + * Little endian. + */ + if (mesg) + *mesg = "Little-endian"; + for (i = 0; i < n; i++) + perm[i] = i; - } else if (perm[last] > perm[last-1] && perm[last-1] > perm[last-2]) { - /* - * Big endian. - */ - if (mesg) *mesg = "Big-endian"; - for (i = 0; i < n; i++) perm[i] = (n - 1) - i; + } + else if (perm[last] > perm[last - 1] + && perm[last - 1] > perm[last - 2]) { + /* + * Big endian. + */ + if (mesg) + *mesg = "Big-endian"; + for (i = 0; i < n; i++) + perm[i] = (n - 1) - i; - } else { - /* - * Bi-endian machines like VAX. + } + else { + /* + * Bi-endian machines like VAX. * (NOTE: This is not an actual determination of the VAX-endianness. * It could have some other endianness and fall into this * case - JKM & QAK) - */ - HDassert(0 == n % 2); - if (mesg) *mesg = "VAX"; - for (i = 0; i < n; i += 2) { - perm[i] = (n - 2) - i; - perm[i + 1] = (n - 1) - i; + */ + HDassert(0 == n % 2); + if (mesg) + *mesg = "VAX"; + for (i = 0; i < n; i += 2) { + perm[i] = (n - 2) - i; + perm[i + 1] = (n - 1) - i; + } } } - } else { - fprintf(stderr, - "Failed to detect byte order of %d-byte floating point.\n", n); - HDexit(1); + else { + fprintf(stderr, + "Failed to detect byte order of %d-byte floating point.\n", n); + HDexit(1); } } /*------------------------------------------------------------------------- - * Function: imp_bit + * Function: imp_bit * - * Purpose: Looks for an implicit bit in the mantissa. The value - * of _A should be 1.0 and the value of _B should be 0.5. - * Some floating-point formats discard the most significant - * bit of the mantissa after normalizing since it will always - * be a one (except for 0.0). If this is true for the native - * floating point values stored in _A and _B then the function - * returns non-zero. + * Purpose: Looks for an implicit bit in the mantissa. The value + * of _A should be 1.0 and the value of _B should be 0.5. + * Some floating-point formats discard the most significant + * bit of the mantissa after normalizing since it will always + * be a one (except for 0.0). If this is true for the native + * floating point values stored in _A and _B then the function + * returns non-zero. * - * This function assumes that the exponent occupies higher - * order bits than the mantissa and that the most significant - * bit of the mantissa is next to the least significant bit - * of the exponent. + * This function assumes that the exponent occupies higher + * order bits than the mantissa and that the most significant + * bit of the mantissa is next to the least significant bit + * of the exponent. * * * Return: Success: Non-zero if the most significant bit @@ -1121,15 +1069,9 @@ fix_order(int n, int last, int *perm, const char **mesg) * most significant bit). Otherwise, * returns zero. * - * Failure: exit(1) - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 13, 1996 + * Failure: 1 * * Modifications: - * - * Robb Matzke, 6 Nov 1996 * Fixed a bug that occurs with non-implicit architectures. * *------------------------------------------------------------------------- @@ -1162,22 +1104,14 @@ imp_bit(unsigned int n, int *perm, void *_a, void *_b, const unsigned char *pad_ /*------------------------------------------------------------------------- - * Function: find_bias + * Function: find_bias * - * Purpose: Determines the bias of the exponent. This function should - * be called with _A having a value of `1'. + * Purpose: Determines the bias of the exponent. This function should + * be called with _A having a value of `1'. * - * Return: Success: The exponent bias. - * - * Failure: - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 13, 1996 + * Return: The exponent bias. * * Modifications: - * - * Robb Matzke, 6 Nov 1996 * Fixed a bug with non-implicit architectures returning the * wrong exponent bias. * @@ -1205,32 +1139,25 @@ find_bias(unsigned int epos, unsigned int esize, int *perm, void *_a) /*------------------------------------------------------------------------- - * Function: print_header + * Function: print_header * - * Purpose: Prints the C file header for the generated file. + * Purpose: Prints the C file header for the generated file. * * Return: void - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Mar 12 1997 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void print_header(void) { - time_t now = HDtime(NULL); - struct tm *tm = HDlocaltime(&now); - char real_name[30]; - char host_name[256]; + time_t now = HDtime(NULL); + struct tm *tm = HDlocaltime(&now); + char real_name[30]; + char host_name[256]; int i; - const char *s; + const char *s; #ifdef H5_HAVE_GETPWUID - struct passwd *pwd = NULL; + struct passwd *pwd = NULL; #else int pwd = 1; #endif @@ -1281,20 +1208,22 @@ bit.\n"; */ #ifdef H5_HAVE_GETPWUID { - size_t n; - char *comma; - if ((pwd = HDgetpwuid(HDgetuid()))) { - if ((comma = HDstrchr(pwd->pw_gecos, ','))) { - n = MIN(sizeof(real_name)-1, (unsigned)(comma-pwd->pw_gecos)); - HDstrncpy(real_name, pwd->pw_gecos, n); - real_name[n] = '\0'; - } else { - HDstrncpy(real_name, pwd->pw_gecos, sizeof(real_name)); - real_name[sizeof(real_name) - 1] = '\0'; + size_t n; + char *comma; + if ((pwd = HDgetpwuid(HDgetuid()))) { + if ((comma = HDstrchr(pwd->pw_gecos, ','))) { + n = MIN(sizeof(real_name)-1, (unsigned)(comma-pwd->pw_gecos)); + HDstrncpy(real_name, pwd->pw_gecos, n); + real_name[n] = '\0'; + } + else { + HDstrncpy(real_name, pwd->pw_gecos, sizeof(real_name)); + real_name[sizeof(real_name) - 1] = '\0'; + } + } + else { + real_name[0] = '\0'; } - } else { - real_name[0] = '\0'; - } } #else real_name[0] = '\0'; @@ -1305,7 +1234,7 @@ bit.\n"; */ #ifdef H5_HAVE_GETHOSTNAME if (HDgethostname(host_name, sizeof(host_name)) < 0) { - host_name[0] = '\0'; + host_name[0] = '\0'; } #else host_name[0] = '\0'; @@ -1314,78 +1243,71 @@ bit.\n"; /* * The file header: warning, copyright notice, build information. */ - printf("/* Generated automatically by H5detect -- do not edit */\n\n\n"); - HDputs(FileHeader); /*the copyright notice--see top of this file */ + fprintf(rawoutstream, "/* Generated automatically by H5detect -- do not edit */\n\n\n"); + HDfputs(FileHeader, rawoutstream); /*the copyright notice--see top of this file */ - printf(" *\n * Created:\t\t%s %2d, %4d\n", + fprintf(rawoutstream, " *\n * Created:\t\t%s %2d, %4d\n", month_name[tm->tm_mon], tm->tm_mday, 1900 + tm->tm_year); if (pwd || real_name[0] || host_name[0]) { - printf(" *\t\t\t"); - if (real_name[0]) printf("%s <", real_name); + fprintf(rawoutstream, " *\t\t\t"); + if (real_name[0]) + fprintf(rawoutstream, "%s <", real_name); #ifdef H5_HAVE_GETPWUID - if (pwd) HDfputs(pwd->pw_name, stdout); + if (pwd) HDfputs(pwd->pw_name, rawoutstream); #endif - if (host_name[0]) printf("@%s", host_name); - if (real_name[0]) printf(">"); - HDputchar('\n'); + if (host_name[0]) + fprintf(rawoutstream, "@%s", host_name); + if (real_name[0]) + fprintf(rawoutstream, ">"); + HDfputc('\n', rawoutstream); } - printf(" *\n * Purpose:\t\t"); + fprintf(rawoutstream, " *\n * Purpose:\t\t"); for (s = purpose; *s; s++) { - HDputchar(*s); - if ('\n' == *s && s[1]) printf(" *\t\t\t"); + HDfputc(*s, rawoutstream); + if ('\n' == *s && s[1]) + fprintf(rawoutstream, " *\t\t\t"); } - printf(" *\n * Modifications:\n *\n"); - printf(" *\tDO NOT MAKE MODIFICATIONS TO THIS FILE!\n"); - printf(" *\tIt was generated by code in `H5detect.c'.\n"); + fprintf(rawoutstream, " *\n * Modifications:\n *\n"); + fprintf(rawoutstream, " *\tDO NOT MAKE MODIFICATIONS TO THIS FILE!\n"); + fprintf(rawoutstream, " *\tIt was generated by code in `H5detect.c'.\n"); - printf(" *\n *"); - for (i = 0; i < 73; i++) HDputchar('-'); - printf("\n */\n\n"); + fprintf(rawoutstream, " *\n *"); + for (i = 0; i < 73; i++) + HDfputc('-', rawoutstream); + fprintf(rawoutstream, "\n */\n\n"); } /*------------------------------------------------------------------------- - * Function: detect_C89_integers + * Function: detect_C89_integers * - * Purpose: Detect C89 integer types + * Purpose: Detect C89 integer types * * Return: void - * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN detect_C89_integers(void) { - DETECT_BYTE(signed char, SCHAR, d_g[nd_g]); nd_g++; - DETECT_BYTE(unsigned char, UCHAR, d_g[nd_g]); nd_g++; - DETECT_I(short, SHORT, d_g[nd_g]); nd_g++; - DETECT_I(unsigned short, USHORT, d_g[nd_g]); nd_g++; - DETECT_I(int, INT, d_g[nd_g]); nd_g++; - DETECT_I(unsigned int, UINT, d_g[nd_g]); nd_g++; - DETECT_I(long, LONG, d_g[nd_g]); nd_g++; - DETECT_I(unsigned long, ULONG, d_g[nd_g]); nd_g++; + DETECT_BYTE(signed char, SCHAR, d_g[nd_g]); nd_g++; + DETECT_BYTE(unsigned char, UCHAR, d_g[nd_g]); nd_g++; + DETECT_I(short, SHORT, d_g[nd_g]); nd_g++; + DETECT_I(unsigned short, USHORT, d_g[nd_g]); nd_g++; + DETECT_I(int, INT, d_g[nd_g]); nd_g++; + DETECT_I(unsigned int, UINT, d_g[nd_g]); nd_g++; + DETECT_I(long, LONG, d_g[nd_g]); nd_g++; + DETECT_I(unsigned long, ULONG, d_g[nd_g]); nd_g++; } /*------------------------------------------------------------------------- - * Function: detect_C89_floats + * Function: detect_C89_floats * - * Purpose: Detect C89 floating point types + * Purpose: Detect C89 floating point types * * Return: void - * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN @@ -1397,17 +1319,11 @@ detect_C89_floats(void) /*------------------------------------------------------------------------- - * Function: detect_C99_integers8 + * Function: detect_C99_integers8 * - * Purpose: Detect C99 8 bit integer types + * Purpose: Detect C99 8 bit integer types * * Return: void - * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN @@ -1415,61 +1331,55 @@ detect_C99_integers8(void) { #if H5_SIZEOF_INT8_T>0 #if H5_SIZEOF_INT8_T==1 - DETECT_BYTE(int8_t, INT8, d_g[nd_g]); nd_g++; + DETECT_BYTE(int8_t, INT8, d_g[nd_g]); nd_g++; #else - DETECT_I(int8_t, INT8, d_g[nd_g]); nd_g++; + DETECT_I(int8_t, INT8, d_g[nd_g]); nd_g++; #endif #endif #if H5_SIZEOF_UINT8_T>0 #if H5_SIZEOF_UINT8_T==1 - DETECT_BYTE(uint8_t, UINT8, d_g[nd_g]); nd_g++; + DETECT_BYTE(uint8_t, UINT8, d_g[nd_g]); nd_g++; #else - DETECT_I(uint8_t, UINT8, d_g[nd_g]); nd_g++; + DETECT_I(uint8_t, UINT8, d_g[nd_g]); nd_g++; #endif #endif #if H5_SIZEOF_INT_LEAST8_T>0 #if H5_SIZEOF_INT_LEAST8_T==1 - DETECT_BYTE(int_least8_t, INT_LEAST8, d_g[nd_g]); nd_g++; + DETECT_BYTE(int_least8_t, INT_LEAST8, d_g[nd_g]); nd_g++; #else - DETECT_I(int_least8_t, INT_LEAST8, d_g[nd_g]); nd_g++; + DETECT_I(int_least8_t, INT_LEAST8, d_g[nd_g]); nd_g++; #endif #endif #if H5_SIZEOF_UINT_LEAST8_T>0 #if H5_SIZEOF_UINT_LEAST8_T==1 - DETECT_BYTE(uint_least8_t, UINT_LEAST8, d_g[nd_g]); nd_g++; + DETECT_BYTE(uint_least8_t, UINT_LEAST8, d_g[nd_g]); nd_g++; #else - DETECT_I(uint_least8_t, UINT_LEAST8, d_g[nd_g]); nd_g++; + DETECT_I(uint_least8_t, UINT_LEAST8, d_g[nd_g]); nd_g++; #endif #endif #if H5_SIZEOF_INT_FAST8_T>0 #if H5_SIZEOF_INT_FAST8_T==1 - DETECT_BYTE(int_fast8_t, INT_FAST8, d_g[nd_g]); nd_g++; + DETECT_BYTE(int_fast8_t, INT_FAST8, d_g[nd_g]); nd_g++; #else DETECT_I(int_fast8_t, INT_FAST8, d_g[nd_g]); nd_g++; #endif #endif #if H5_SIZEOF_UINT_FAST8_T>0 #if H5_SIZEOF_UINT_FAST8_T==1 - DETECT_BYTE(uint_fast8_t, UINT_FAST8, d_g[nd_g]); nd_g++; + DETECT_BYTE(uint_fast8_t, UINT_FAST8, d_g[nd_g]); nd_g++; #else - DETECT_I(uint_fast8_t, UINT_FAST8, d_g[nd_g]); nd_g++; + DETECT_I(uint_fast8_t, UINT_FAST8, d_g[nd_g]); nd_g++; #endif #endif } /*------------------------------------------------------------------------- - * Function: detect_C99_integers16 + * Function: detect_C99_integers16 * - * Purpose: Detect C99 16 bit integer types + * Purpose: Detect C99 16 bit integer types * * Return: void - * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN @@ -1479,35 +1389,29 @@ detect_C99_integers16(void) DETECT_I(int16_t, INT16, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT16_T>0 - DETECT_I(uint16_t, UINT16, d_g[nd_g]); nd_g++; + DETECT_I(uint16_t, UINT16, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_INT_LEAST16_T>0 - DETECT_I(int_least16_t, INT_LEAST16, d_g[nd_g]); nd_g++; + DETECT_I(int_least16_t, INT_LEAST16, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT_LEAST16_T>0 - DETECT_I(uint_least16_t, UINT_LEAST16, d_g[nd_g]); nd_g++; + DETECT_I(uint_least16_t, UINT_LEAST16, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_INT_FAST16_T>0 - DETECT_I(int_fast16_t, INT_FAST16, d_g[nd_g]); nd_g++; + DETECT_I(int_fast16_t, INT_FAST16, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT_FAST16_T>0 - DETECT_I(uint_fast16_t, UINT_FAST16, d_g[nd_g]); nd_g++; + DETECT_I(uint_fast16_t, UINT_FAST16, d_g[nd_g]); nd_g++; #endif } /*------------------------------------------------------------------------- - * Function: detect_C99_integers32 + * Function: detect_C99_integers32 * - * Purpose: Detect C99 32 bit integer types + * Purpose: Detect C99 32 bit integer types * * Return: void - * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN @@ -1517,35 +1421,30 @@ detect_C99_integers32(void) DETECT_I(int32_t, INT32, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT32_T>0 - DETECT_I(uint32_t, UINT32, d_g[nd_g]); nd_g++; + DETECT_I(uint32_t, UINT32, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_INT_LEAST32_T>0 - DETECT_I(int_least32_t, INT_LEAST32, d_g[nd_g]); nd_g++; + DETECT_I(int_least32_t, INT_LEAST32, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT_LEAST32_T>0 - DETECT_I(uint_least32_t, UINT_LEAST32, d_g[nd_g]); nd_g++; + DETECT_I(uint_least32_t, UINT_LEAST32, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_INT_FAST32_T>0 - DETECT_I(int_fast32_t, INT_FAST32, d_g[nd_g]); nd_g++; + DETECT_I(int_fast32_t, INT_FAST32, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT_FAST32_T>0 - DETECT_I(uint_fast32_t, UINT_FAST32, d_g[nd_g]); nd_g++; + DETECT_I(uint_fast32_t, UINT_FAST32, d_g[nd_g]); nd_g++; #endif } /*------------------------------------------------------------------------- - * Function: detect_C99_integers64 + * Function: detect_C99_integers64 * - * Purpose: Detect C99 64 bit integer types + * Purpose: Detect C99 64 bit integer types * * Return: void * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN @@ -1555,24 +1454,24 @@ detect_C99_integers64(void) DETECT_I(int64_t, INT64, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT64_T>0 - DETECT_I(uint64_t, UINT64, d_g[nd_g]); nd_g++; + DETECT_I(uint64_t, UINT64, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_INT_LEAST64_T>0 - DETECT_I(int_least64_t, INT_LEAST64, d_g[nd_g]); nd_g++; + DETECT_I(int_least64_t, INT_LEAST64, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT_LEAST64_T>0 - DETECT_I(uint_least64_t, UINT_LEAST64, d_g[nd_g]); nd_g++; + DETECT_I(uint_least64_t, UINT_LEAST64, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_INT_FAST64_T>0 - DETECT_I(int_fast64_t, INT_FAST64, d_g[nd_g]); nd_g++; + DETECT_I(int_fast64_t, INT_FAST64, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_UINT_FAST64_T>0 - DETECT_I(uint_fast64_t, UINT_FAST64, d_g[nd_g]); nd_g++; + DETECT_I(uint_fast64_t, UINT_FAST64, d_g[nd_g]); nd_g++; #endif #if H5_SIZEOF_LONG_LONG>0 DETECT_I(long long, LLONG, d_g[nd_g]); nd_g++; - DETECT_I(unsigned long long, ULLONG, d_g[nd_g]); nd_g++; + DETECT_I(unsigned long long, ULLONG, d_g[nd_g]); nd_g++; #else /* * This architecture doesn't support an integer type larger than `long' @@ -1580,23 +1479,17 @@ detect_C99_integers64(void) * `long long' is probably equivalent to `long' here anyway. */ DETECT_I(long, LLONG, d_g[nd_g]); nd_g++; - DETECT_I(unsigned long, ULLONG, d_g[nd_g]); nd_g++; + DETECT_I(unsigned long, ULLONG, d_g[nd_g]); nd_g++; #endif } /*------------------------------------------------------------------------- - * Function: detect_C99_integers + * Function: detect_C99_integers * - * Purpose: Detect C99 integer types + * Purpose: Detect C99 integer types * * Return: void - * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN @@ -1612,17 +1505,11 @@ detect_C99_integers(void) /*------------------------------------------------------------------------- - * Function: detect_C99_floats + * Function: detect_C99_floats * - * Purpose: Detect C99 floating point types + * Purpose: Detect C99 floating point types * * Return: void - * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN @@ -1643,17 +1530,11 @@ detect_C99_floats(void) /*------------------------------------------------------------------------- - * Function: detect_alignments + * Function: detect_alignments * - * Purpose: Detect structure alignments + * Purpose: Detect structure alignments * * Return: void - * - * Programmer: Albert Cheng - * 2004/05/20 - * - * Modifications: - * *------------------------------------------------------------------------- */ static void HDF_NO_UBSAN @@ -1685,60 +1566,54 @@ static int verify_signal_handlers(int signum, void (*handler)(int)) #endif void (*save_handler)(int) = HDsignal(signum, handler); volatile int i, val; - int ntries=5; - volatile int nfailures=0; - volatile int nsuccesses=0; - - for (i=0;i<ntries; i++){ - val=H5SETJMP(jbuf_g); - if (val==0) - { - /* send self the signal to trigger the handler */ - signal_handler_tested_g++; - HDraise(signum); - /* Should not reach here. Record error. */ - nfailures++; - }else{ - if (val==signum){ - /* return from signum handler. Record a sucess. */ - nsuccesses++; - }else{ - fprintf(stderr, "Unknown return value (%d) from H5SETJMP", - val); - nfailures++; + int ntries = 5; + volatile int nfailures = 0; + volatile int nsuccesses = 0; + + for (i=0;i<ntries; i++) { + val=H5SETJMP(jbuf_g); + if (val==0) { + /* send self the signal to trigger the handler */ + signal_handler_tested_g++; + HDraise(signum); + /* Should not reach here. Record error. */ + nfailures++; + } + else { + if (val==signum) { + /* return from signum handler. Record a sucess. */ + nsuccesses++; + } + else { + fprintf(stderr, "Unknown return value (%d) from H5SETJMP", val); + nfailures++; + } } - } } /* restore save handler, check results and report failures */ HDsignal(signum, save_handler); - if (nfailures>0 || nsuccesses != ntries){ - fprintf(stderr, "verify_signal_handlers for signal %d did %d tries. " - "Found %d failures and %d successes\n", - signum, ntries, nfailures, nsuccesses); - return(-1); - }else{ - /* all succeeded */ - return(0); + if (nfailures>0 || nsuccesses != ntries) { + fprintf(stderr, "verify_signal_handlers for signal %d did %d tries. " + "Found %d failures and %d successes\n", + signum, ntries, nfailures, nsuccesses); + return -1; + } + else { + /* all succeeded */ + return 0; } } #endif /*------------------------------------------------------------------------- - * Function: main - * - * Purpose: Main entry point. - * - * Return: Success: exit(0) + * Function: main * - * Failure: exit(1) + * Purpose: Main entry point. * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Jun 12, 1996 + * Return: Success: 0 * * Modifications: - * Albert Cheng, 2004/05/20 * Some compilers, e.g., Intel C v7.0, took a long time to compile * with optimization when a module routine contains many code lines. * Divide up all those types detections macros into subroutines, both @@ -1747,8 +1622,24 @@ static int verify_signal_handlers(int signum, void (*handler)(int)) *------------------------------------------------------------------------- */ int HDF_NO_UBSAN -main(void) +main(int argc, char *argv[]) { + char *fname = NULL; + FILE *f; /* temporary holding place for the stream pointer + * so that rawoutstream is changed only when succeeded */ + + if (argc > 1) { + fname = argv[1]; + } + /* First check if filename is string "NULL" */ + if (fname != NULL) { + /* binary output */ + if ((f = HDfopen(fname, "w")) != NULL) { + rawoutstream = f; + } + } + if (!rawoutstream) + rawoutstream = stdout; #if defined(H5_HAVE_SETSYSINFO) && defined(SSI_NVPAIRS) #if defined(UAC_NOPRINT) && defined(UAC_SIGBUS) @@ -1760,7 +1651,7 @@ main(void) nvpairs[0] = SSIN_UACPROC; nvpairs[1] = UAC_NOPRINT | UAC_SIGBUS; if (setsysinfo(SSI_NVPAIRS, nvpairs, 1, 0, 0)<0) { - fprintf(stderr, "H5detect: unable to turn off UAC handling: %s\n", + fprintf(stderr, "H5detect: unable to turn off UAC handling: %s\n", HDstrerror(errno)); } #endif @@ -1803,5 +1694,12 @@ main(void) print_results (nd_g, d_g, na_g, m_g); - return 0; + if (rawoutstream && rawoutstream != stdout) { + if (HDfclose(rawoutstream)) + fprintf(stderr, "closing rawoutstream"); + else + rawoutstream = NULL; + } + + return EXIT_SUCCESS; } diff --git a/src/H5make_libsettings.c b/src/H5make_libsettings.c index 1892806..d4caabb 100644 --- a/src/H5make_libsettings.c +++ b/src/H5make_libsettings.c @@ -26,13 +26,8 @@ static const char *FileHeader = "\n\ * help@hdfgroup.org. *\n\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *"; /* - * - * Created: H5make_libsettings.c - * 17 Mar 2010 - * Quincey Koziol - * - * Purpose: Generate the H5libsettings.c file from the - * libhdf5.settings file. + * Purpose: Generate the H5libsettings.c file from the + * libhdf5.settings file. * *------------------------------------------------------------------------- */ @@ -43,33 +38,30 @@ static const char *FileHeader = "\n\ #define LIBSETTINGSFNAME "libhdf5.settings" - +FILE *rawoutstream = NULL; + /*------------------------------------------------------------------------- - * Function: insert_libhdf5_settings - * - * Purpose: insert the contents of libhdf5.settings into a file - * represented by flibinfo. - * Make it an empty string if H5_HAVE_EMBEDDED_LIBINFO is not - * defined, i.e., not enabled. + * Function: insert_libhdf5_settings * - * Return: void - * - * Programmer: Albert Cheng - * Apr 20, 2009 + * Purpose: insert the contents of libhdf5.settings into a file + * represented by flibinfo. + * Make it an empty string if H5_HAVE_EMBEDDED_LIBINFO is not + * defined, i.e., not enabled. * + * Return: void *------------------------------------------------------------------------- */ static void insert_libhdf5_settings(FILE *flibinfo) { #ifdef H5_HAVE_EMBEDDED_LIBINFO - FILE *fsettings; /* for files libhdf5.settings */ + FILE *fsettings; /* for files libhdf5.settings */ int inchar; - int bol = 0; /* indicates the beginning of a new line */ + int bol = 0; /* indicates the beginning of a new line */ if(NULL == (fsettings = HDfopen(LIBSETTINGSFNAME, "r"))) { HDperror(LIBSETTINGSFNAME); - HDexit(1); + HDexit(EXIT_FAILURE); } /* end if */ /* print variable definition and the string */ @@ -77,33 +69,33 @@ insert_libhdf5_settings(FILE *flibinfo) fprintf(flibinfo, "char H5libhdf5_settings[]=\n"); bol++; while(EOF != (inchar = HDgetc(fsettings))) { - if(bol) { - /* Start a new line */ - fprintf(flibinfo, "\t\""); - bol = 0; - } /* end if */ - if(inchar == '\n') { - /* end of a line */ - fprintf(flibinfo, "\\n\"\n"); - bol++; + if(bol) { + /* Start a new line */ + fprintf(flibinfo, "\t\""); + bol = 0; + } /* end if */ + if(inchar == '\n') { + /* end of a line */ + fprintf(flibinfo, "\\n\"\n"); + bol++; } /* end if */ - else - HDputc(inchar, flibinfo); + else + HDputc(inchar, flibinfo); } /* end while */ if(HDfeof(fsettings)) { - /* wrap up */ - if(!bol) - /* EOF found without a new line */ - fprintf(flibinfo, "\\n\"\n"); - fprintf(flibinfo, ";\n\n"); + /* wrap up */ + if(!bol) + /* EOF found without a new line */ + fprintf(flibinfo, "\\n\"\n"); + fprintf(flibinfo, ";\n\n"); } /* end if */ else { - fprintf(stderr, "Read errors encountered with %s\n", LIBSETTINGSFNAME); - HDexit(1); + fprintf(stderr, "Read errors encountered with %s\n", LIBSETTINGSFNAME); + HDexit(EXIT_FAILURE); } /* end else */ if(0 != HDfclose(fsettings)) { - HDperror(LIBSETTINGSFNAME); - HDexit(1); + HDperror(LIBSETTINGSFNAME); + HDexit(EXIT_FAILURE); } /* end if */ #else /* print variable definition and an empty string */ @@ -112,61 +104,52 @@ insert_libhdf5_settings(FILE *flibinfo) #endif } /* insert_libhdf5_settings() */ - + /*------------------------------------------------------------------------- - * Function: make_libinfo - * - * Purpose: Create the embedded library information definition. - * This sets up for a potential extension that the declaration - * is printed to a file different from stdout. + * Function: make_libinfo * - * Return: void - * - * Programmer: Albert Cheng - * Sep 15, 2009 + * Purpose: Create the embedded library information definition. + * This sets up for a potential extension that the declaration + * is printed to a file different from stdout. * + * Return: void *------------------------------------------------------------------------- */ static void make_libinfo(void) { /* print variable definition and then the string as a macro. */ - insert_libhdf5_settings(stdout); + insert_libhdf5_settings(rawoutstream); } - + /*------------------------------------------------------------------------- - * Function: print_header + * Function: print_header * - * Purpose: Prints the header for the generated file. - * - * Return: void - * - * Programmer: Robb Matzke - * matzke@llnl.gov - * Mar 12 1997 + * Purpose: Prints the header for the generated file. * + * Return: void *------------------------------------------------------------------------- */ static void print_header(void) { - time_t now = HDtime(NULL); - struct tm *tm = HDlocaltime(&now); - char real_name[30]; - char host_name[256]; - int i; - const char *s; + time_t now = HDtime(NULL); + struct tm *tm = HDlocaltime(&now); + char real_name[30]; + char host_name[256]; + int i; + const char *s; #ifdef H5_HAVE_GETPWUID - struct passwd *pwd = NULL; + struct passwd *pwd = NULL; #else - int pwd = 1; + int pwd = 1; #endif - static const char *month_name[] = + static const char *month_name[] = { - "Jan", "Feb", "Mar", "Apr", "May", "Jun", - "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; - static const char *purpose = "\ + "Jan", "Feb", "Mar", "Apr", "May", "Jun", + "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; + static const char *purpose = "\ This machine-generated source code contains\n\ information about the library build configuration\n"; @@ -175,22 +158,22 @@ information about the library build configuration\n"; */ #ifdef H5_HAVE_GETPWUID { - size_t n; - char *comma; + size_t n; + char *comma; - if((pwd = HDgetpwuid(HDgetuid()))) { - if((comma = HDstrchr(pwd->pw_gecos, ','))) { - n = MIN(sizeof(real_name) - 1, (unsigned)(comma - pwd->pw_gecos)); - HDstrncpy(real_name, pwd->pw_gecos, n); - real_name[n] = '\0'; - } /* end if */ + if((pwd = HDgetpwuid(HDgetuid()))) { + if((comma = HDstrchr(pwd->pw_gecos, ','))) { + n = MIN(sizeof(real_name) - 1, (unsigned)(comma - pwd->pw_gecos)); + HDstrncpy(real_name, pwd->pw_gecos, n); + real_name[n] = '\0'; + } /* end if */ else { - HDstrncpy(real_name, pwd->pw_gecos, sizeof(real_name)); - real_name[sizeof(real_name) - 1] = '\0'; - } /* end else */ - } /* end if */ + HDstrncpy(real_name, pwd->pw_gecos, sizeof(real_name)); + real_name[sizeof(real_name) - 1] = '\0'; + } /* end else */ + } /* end if */ else - real_name[0] = '\0'; + real_name[0] = '\0'; } #else real_name[0] = '\0'; @@ -201,7 +184,7 @@ information about the library build configuration\n"; */ #ifdef H5_HAVE_GETHOSTNAME if(HDgethostname(host_name, sizeof(host_name)) < 0) - host_name[0] = '\0'; + host_name[0] = '\0'; #else host_name[0] = '\0'; #endif @@ -209,54 +192,49 @@ information about the library build configuration\n"; /* * The file header: warning, copyright notice, build information. */ - printf("/* Generated automatically by H5make_libsettings -- do not edit */\n\n\n"); - HDputs(FileHeader); /*the copyright notice--see top of this file */ + fprintf(rawoutstream, "/* Generated automatically by H5make_libsettings -- do not edit */\n\n\n"); + HDfputs(FileHeader, rawoutstream); /*the copyright notice--see top of this file */ - printf(" *\n * Created:\t\t%s %2d, %4d\n", - month_name[tm->tm_mon], tm->tm_mday, 1900 + tm->tm_year); + fprintf(rawoutstream, " *\n * Created:\t\t%s %2d, %4d\n", + month_name[tm->tm_mon], tm->tm_mday, 1900 + tm->tm_year); if(pwd || real_name[0] || host_name[0]) { - printf(" *\t\t\t"); - if(real_name[0]) - printf("%s <", real_name); + fprintf(rawoutstream, " *\t\t\t"); + if(real_name[0]) + fprintf(rawoutstream, "%s <", real_name); #ifdef H5_HAVE_GETPWUID - if(pwd) - HDfputs(pwd->pw_name, stdout); + if(pwd) + HDfputs(pwd->pw_name, rawoutstream); #endif - if(host_name[0]) - printf("@%s", host_name); - if(real_name[0]) - printf(">"); - HDputchar('\n'); + if(host_name[0]) + fprintf(rawoutstream, "@%s", host_name); + if(real_name[0]) + fprintf(rawoutstream, ">"); + HDfputc('\n', rawoutstream); } /* end if */ - printf(" *\n * Purpose:\t\t"); + fprintf(rawoutstream, " *\n * Purpose:\t\t"); for(s = purpose; *s; s++) { - HDputchar(*s); - if('\n' == *s && s[1]) - printf(" *\t\t\t"); + HDfputc(*s, rawoutstream); + if('\n' == *s && s[1]) + fprintf(rawoutstream, " *\t\t\t"); } /* end for */ - printf(" *\n * Modifications:\n *\n"); - printf(" *\tDO NOT MAKE MODIFICATIONS TO THIS FILE!\n"); - printf(" *\tIt was generated by code in `H5make_libsettings.c'.\n"); + fprintf(rawoutstream, " *\n * Modifications:\n *\n"); + fprintf(rawoutstream, " *\tDO NOT MAKE MODIFICATIONS TO THIS FILE!\n"); + fprintf(rawoutstream, " *\tIt was generated by code in `H5make_libsettings.c'.\n"); - printf(" *\n *"); + fprintf(rawoutstream, " *\n *"); for(i = 0; i < 73; i++) - HDputchar('-'); - printf("\n */\n\n"); + HDfputc('-', rawoutstream); + fprintf(rawoutstream, "\n */\n\n"); } - + /*------------------------------------------------------------------------- - * Function: print_footer - * - * Purpose: Prints the file footer for the generated file. + * Function: print_footer * - * Return: void - * - * Programmer: Quincey Koziol - * koziol@hdfgroup.org - * Mar 31 2010 + * Purpose: Prints the file footer for the generated file. * + * Return: void *------------------------------------------------------------------------- */ static void @@ -265,24 +243,35 @@ print_footer(void) /* nothing */ } - + /*------------------------------------------------------------------------- - * Function: main - * - * Purpose: Main entry point. - * - * Return: Success: exit(0) - * - * Failure: exit(1) + * Function: main * - * Programmer: Albert Cheng - * 2010/4/1 + * Purpose: Main entry point. * + * Return: Success: 0 *------------------------------------------------------------------------- */ int -main(void) +main(int argc, char *argv[]) { + char *fname = NULL; + FILE *f; /* temporary holding place for the stream pointer + * so that rawoutstream is changed only when succeeded */ + + if (argc > 1) { + fname = argv[1]; + } + /* First check if filename is string "NULL" */ + if (fname != NULL) { + /* binary output */ + if ((f = HDfopen(fname, "w")) != NULL) { + rawoutstream = f; + } + } + if (!rawoutstream) + rawoutstream = stdout; + print_header(); /* Generate embedded library information variable definition */ @@ -290,5 +279,12 @@ main(void) print_footer(); - HDexit(0); + if (rawoutstream && rawoutstream != stdout) { + if (HDfclose(rawoutstream)) + fprintf(stderr, "closing rawoutstream"); + else + rawoutstream = NULL; + } + + HDexit(EXIT_SUCCESS); } diff --git a/src/Makefile.am b/src/Makefile.am index a0defad..bc5c09e 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -153,7 +153,7 @@ settings_DATA=libhdf5.settings H5Tinit.c: H5detect$(EXEEXT) LD_LIBRARY_PATH="$$LD_LIBRARY_PATH`echo $(LDFLAGS) | \ sed -e 's/-L/:/g' -e 's/ //g'`" \ - $(RUNSERIAL) ./H5detect$(EXEEXT) > $@ || \ + $(RUNSERIAL) ./H5detect$(EXEEXT) $@ || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ ($(RM) $@ ; exit 1) @@ -165,7 +165,7 @@ H5Tinit.c: H5detect$(EXEEXT) H5lib_settings.c: H5make_libsettings$(EXEEXT) libhdf5.settings LD_LIBRARY_PATH="$$LD_LIBRARY_PATH`echo $(LDFLAGS) | \ sed -e 's/-L/:/g' -e 's/ //g'`" \ - $(RUNSERIAL) ./H5make_libsettings$(EXEEXT) > $@ || \ + $(RUNSERIAL) ./H5make_libsettings$(EXEEXT) $@ || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ ($(RM) $@ ; exit 1) |