summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--config/ibm-aix12
-rw-r--r--config/ibm-aix6.x2
-rw-r--r--config/ibm-flags2
-rw-r--r--config/powerpc-ibm-aix5.x151
4 files changed, 11 insertions, 156 deletions
diff --git a/config/ibm-aix b/config/ibm-aix
index 134ad8e..2fb6bc4 100644
--- a/config/ibm-aix
+++ b/config/ibm-aix
@@ -31,15 +31,17 @@ if test "X-" = "X-$CC"; then
fi
# Define RUNPARALLEL if parallel mode is enabled or a parallel compiler used.
+# Define RUNSERIAL: Temporary patch for Bug 1678. -q32 binary default to run
+# with smaller memory.
+# Ask for more memory so that "make check" will pass. Not necessary for -q64
+# mode but it does no harm.
if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpcc_r; then
RUNPARALLEL=${RUNPARALLEL="env MP_PROCS=\$\${NPROCS:=3} MP_TASKS_PER_NODE=\$\${NPROCS:=3} poe"}
+ RUNSERIAL=${RUNSERIAL="env LDR_CNTRL=MAXDATA=0x20000000@DSA MP_PROCS=1 MP_TASKS_PER_NODE=1 poe"}
+else
+ RUNSERIAL=${RUNSERIAL="env LDR_CNTRL=MAXDATA=0x20000000@DSA"}
fi
-# Temporary patch for Bug 1678. -q32 binary default to run with smaller memory.
-# Ask for more memory so that "make check" will pass. Not necessary for -q64
-# mode but it does no harm.
-RUNSERIAL=${RUNSERIAL="env LDR_CNTRL=MAXDATA=0x20000000@DSA"}
-
#----------------------------------------------------------------------------
# Compiler flags. The CPPFLAGS values should not include package debug
diff --git a/config/ibm-aix6.x b/config/ibm-aix6.x
index 24c2e11..104008a 100644
--- a/config/ibm-aix6.x
+++ b/config/ibm-aix6.x
@@ -15,7 +15,7 @@
# Configuration file for building on the IBM AIX 6.X platforms.
# This file is part of the HDF5 build script. It is processed shortly
# after configure starts and defines, among other things, flags for
-# the various compile modesrcdir/config/ibm-aix
+# the various compile modes.
# Use the generic ibm-aix.
. $srcdir/config/ibm-aix
diff --git a/config/ibm-flags b/config/ibm-flags
index 9e63f79..5e092b8 100644
--- a/config/ibm-flags
+++ b/config/ibm-flags
@@ -28,7 +28,7 @@
#
if test X = "X$cc_flags_set"; then
# Verify this is an IBM XL compiler
- cc_version="`$CC $CFLAGS -qversion 2>&1 | grep '^IBM XL C/C++'`"
+ cc_version="`$CC $CFLAGS -qversion 2>&1 | grep 'IBM XL C/C++'`"
if test X != "X$cc_version"; then
cc_vendor="XL"
cc_version="`$CC $CFLAGS -qversion 2>&1 | sed -n 's/Version: \([0-9\.]*\).*/\1/p'`"
diff --git a/config/powerpc-ibm-aix5.x b/config/powerpc-ibm-aix5.x
index b39fb47..50a4e8c 100644
--- a/config/powerpc-ibm-aix5.x
+++ b/config/powerpc-ibm-aix5.x
@@ -1,7 +1,6 @@
# -*- shell-script -*-
#
# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
@@ -18,151 +17,5 @@
# after configure starts and defines, among other things, flags for
# the various compile modes.
-# Use AIX supplied C compiler by default, xlc for serial, mpcc_r for parallel.
-# Make sure this is applied to other API compile options such as C++.
-if test "X-" = "X-$CC"; then
- if test "X-$enable_parallel" = "X-yes"; then
- CC=mpcc_r
- CC_BASENAME=mpcc_r
- else
- CC=xlc
- CC_BASENAME=xlc
- fi
-fi
-
-# Define RUNPARALLEL if parallel mode is enabled or a parallel compiler used.
-if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpcc_r; then
- RUNPARALLEL=${RUNPARALLEL="env MP_PROCS=\$\${NPROCS:=3} MP_TASKS_PER_NODE=\$\${NPROCS:=3} poe"}
-fi
-
-# Temporary patch for Bug 1678. -q32 binary default to run with smaller memory.
-# Ask for more memory so that "make check" will pass. Not necessary for -q64
-# mode but it does no harm.
-RUNSERIAL=${RUNSERIAL="env LDR_CNTRL=MAXDATA=0x20000000@DSA"}
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-
-case $CC_BASENAME in
- xlc|xlc-*|mpcc_r|mpcc_r-*)
- # Turn off shared lib option. It causes some test suite to fail.
- enable_shared="${enable_shared:-no}"
- # Make sure this is applied to other API compile options such as C++.
- AM_CFLAGS="$AM_CFLAGS"
- H5_CFLAGS="-qlanglvl=stdc99 $H5_CFLAGS"
- DEBUG_CFLAGS="-g -qfullpath"
- DEBUG_CPPFLAGS=
- # -O causes test/dtypes to fail badly. Turn it off for now.
- PROD_CFLAGS=""
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-g -qfullpath -pg"
- PROFILE_CPPFLAGS=
- ;;
-
- gcc)
- . $srcdir/config/gnu-flags
- ;;
-
- *)
- H5_CFLAGS="$H5_CFLAGS -ansi"
- DEBUG_CFLAGS="-g"
- DEBUG_CPPFLAGS=
- PROD_CFLAGS="-O"
- PROD_CPPFLAGS=
- PROFILE_CFLAGS="-pg"
- PROFILE_CPPFLAGS=
- ;;
-esac
-
-#----------------------------------------------------------------------------
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-ac_cv_header_stdc=${ac_cv_header_stdc='yes'}
-ac_cv_header_sys_ioctl_h=${ac_cv_header_sys_ioctl_h=yes}
-
-# cache the sizeof of "standard C types" so that configure can run faster.
-ac_cv_sizeof_char=${ac_cv_sizeof_char=1}
-ac_cv_sizeof_short=${ac_cv_sizeof_short=2}
-ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
-ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long=8}
-ac_cv_sizeof___int64=${ac_cv_sizeof___int64=8}
-ac_cv_sizeof_float=${ac_cv_sizeof_float=4}
-ac_cv_sizeof_double=${ac_cv_sizeof_double=8}
-ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double=8}
-ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t=1}
-ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t=1}
-ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t=1}
-ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t=1}
-# Do not cache int_fast8_t since the vendor changes often.
-ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t=2}
-ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t=2}
-ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t=2}
-ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t=2}
-# Do not cache int_fast16_t since the vendor changes often.
-ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t=4}
-ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t=4}
-ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t=4}
-ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t=4}
-ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t=4}
-ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t=4}
-ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t=8}
-ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t=8}
-ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t=8}
-ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t=8}
-ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t=8}
-ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t=8}
-
-# Don't cache long since it varies between 32 and 64 bits
-#ac_cv_sizeof_long=${ac_cv_sizeof_long=4}
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$FC"; then
- if test "X-$enable_parallel" = "X-yes"; then
- FC=mpxlf90_r
- else
- FC=xlf90
- fi
-fi
-
-# While we try to avoid setting FCFLAGS directly for use in compilation, in
-# this case we need the -k flag present for some configure checks. As such,
-# the configure script saves the user's set FCFLAGS before running, and
-# restores them when complete. We must then set up both FCFLAGS and H5_FCFLAGS
-# to ensure the flag is present for both configure as well as for the build.
-if test "X-" = "X-$f9x_flags_set"; then
- F9XSUFFIXFLAG="-qsuffix=f=f90"
- FCFLAGS="$FCFLAGS -O ${F9XSUFFIXFLAG}"
- H5_FCFLAGS="$H5_FCFLAGS -O ${F9XSUFFIXFLAG}"
- FSEARCH_DIRS="-I./ -I../src"
- DEBUG_FCFLAGS="-O"
- PROD_FCFLAGS="-O"
- PROFILE_FCFLAGS="-O"
- f9x_flags_set=yes
-fi
-
-# With poe version 3.2.0.19 or lower(using lpp -l all | grep ppe.poe to check the version number,
-# IBM MPI-IO implementation has a bug,
-#it cannot generate correct MPI derived datatype. Please uncomment the following line:
-#hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'}
-
-# The default C++ compiler
-
-# Use AIX supplied C++ compiler by default.
-CXX=${CXX=xlC}
-
-# Added -qweaksymbol to suppress linker messages warning of duplicate
-# symbols; these warnings are harmless. - BMR
-H5_CXXFLAGS="$H5_CXXFLAGS -qweaksymbol"
-AM_CXXFLAGS="$AM_CXXFLAGS"
-
-
+# Use the generic ibm-aix.
+. $srcdir/config/ibm-aix