diff options
| -rw-r--r-- | MANIFEST | 2 | ||||
| -rwxr-xr-x | windows/copy_hdf.bat | 2 | ||||
| -rw-r--r-- | windows/src/H5FDwindows.c | 1032 | ||||
| -rw-r--r-- | windows/src/H5FDwindows.h | 42 |
4 files changed, 1078 insertions, 0 deletions
@@ -1743,6 +1743,8 @@ #windows src ./windows/src/H5pubconf.h ./windows/src/H5Tinit.c +./windows/src/H5FDwindows.c +./windows/src/H5FDwindows.h #windows test ./windows/test/big/big.dsp diff --git a/windows/copy_hdf.bat b/windows/copy_hdf.bat index 74f58eb..c7b7686 100755 --- a/windows/copy_hdf.bat +++ b/windows/copy_hdf.bat @@ -20,6 +20,8 @@ copy src\H5Tinit.c ..\src
copy src\H5pubconf.h ..\src
+copy src\H5FDwindows.c ..\src
+copy src\H5FDwindows.h ..\src
copy fortran\src\H5f90i_gen.h ..\fortran\src
copy fortran\src\H5fortran_types.f90 ..\fortran\src
xcopy /e/i/Y *.bat ..\
diff --git a/windows/src/H5FDwindows.c b/windows/src/H5FDwindows.c new file mode 100644 index 0000000..f3c0b46 --- /dev/null +++ b/windows/src/H5FDwindows.c @@ -0,0 +1,1032 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group. *
+ * Copyright by the Board of Trustees of the University of Illinois. *
+ * All rights reserved. *
+ * *
+ * This file is part of HDF5. The full HDF5 copyright notice, including *
+ * terms governing use, modification, and redistribution, is contained in *
+ * the files COPYING and Copyright.html. COPYING can be found at the root *
+ * of the source code distribution tree; Copyright.html can be found at the *
+ * root level of an installed copy of the electronic HDF5 document set and *
+ * is linked from the top-level documents page. It can also be found at *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
+ * access to either file, you may request a copy from help@hdfgroup.org. *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer: Scott Wegner <swegner@hdfgroup.org>
+ * Based on code by Robb Matzke
+ * May 24, 2007
+ *
+ * Purpose: We would like to create a driver specifically for Windows
+ * to utilize the Win32 API, and reduce the maintenence demands
+ * for the other file drivers. Our other motivation is that
+ * the Windows system calls of the existing sec2 driver differ
+ * from those on other platforms, and are not 64-bit compatible.
+ * From the start, this will have the structure very similar
+ * to our sec2 driver, but make system calls more similar to
+ * our stdio driver.
+ */
+
+/* Interface initialization */
+#define H5_INTERFACE_INIT_FUNC H5FD_windows_init_interface
+
+
+#include "H5private.h" /* Generic Functions */
+#include "H5Eprivate.h" /* Error handling */
+#include "H5Fprivate.h" /* File access */
+#include "H5FDprivate.h" /* File drivers */
+#include "H5FDwindows.h" /* Windows file driver */
+#include "H5FLprivate.h" /* Free Lists */
+#include "H5Iprivate.h" /* IDs */
+#include "H5MMprivate.h" /* Memory management */
+#include "H5Pprivate.h" /* Property lists */
+
+/* The driver identification number, initialized at runtime */
+static hid_t H5FD_WINDOWS_g = 0;
+
+/* File operations */
+#define OP_UNKNOWN 0
+#define OP_READ 1
+#define OP_WRITE 2
+
+/*
+ * The description of a file belonging to this driver. The `eoa' and `eof'
+ * determine the amount of hdf5 address space in use and the high-water mark
+ * of the file (the current size of the underlying file). The `pos'
+ * value is used to eliminate file position updates when they would be a
+ * no-op. Unfortunately we've found systems that use separate file position
+ * indicators for reading and writing so the lseek can only be eliminated if
+ * the current operation is the same as the previous operation. When opening
+ * a file the `eof' will be set to the current file size, `eoa' will be set
+ * to zero, `pos' will be set to H5F_ADDR_UNDEF (as it is when an error
+ * occurs), and `op' will be set to H5F_OP_UNKNOWN.
+ */
+typedef struct H5FD_windows_t {
+ H5FD_t pub; /*public stuff, must be first */
+ FILE *fp; /*the file handle */
+ haddr_t eoa; /*end of allocated region */
+ haddr_t eof; /*end of file; current file size*/
+ haddr_t pos; /*current file I/O position */
+ int op; /*last operation */
+ unsigned write_access; /*flag to indicate the file was opened with write access */
+ /*
+ * On _WIN32 the low-order word of a unique identifier associated with the
+ * file and the volume serial number uniquely identify a file. This number
+ * may change when the system is restarted or when the
+ * file is opened. After a process opens a file, the identifier is
+ * constant until the file is closed. An application can use this
+ * identifier and the volume serial number to determine whether two
+ * handles refer to the same file.
+ */
+ DWORD fileindexlo;
+ DWORD fileindexhi;
+ DWORD volumeserialnumber;
+} H5FD_windows_t;
+
+
+/*
+ * This driver supports systems that have the lseeki64() function by defining
+ * some macros here so we don't have to have conditional compilations later
+ * throughout the code.
+ *
+ * file_offset_t: The datatype for file offsets, the second argument of
+ * the lseek() or lseeki64() call.
+ *
+ * file_seek: The function which adjusts the current file position,
+ * either lseek() or lseek64().
+ */
+
+# define file_offset_t __int64
+# define file_seek _fseeki64
+
+/*
+ * These macros check for overflow of various quantities. These macros
+ * assume that file_offset_t is signed and haddr_t and size_t are unsigned.
+ *
+ * ADDR_OVERFLOW: Checks whether a file address of type `haddr_t'
+ * is too large to be represented by the second argument
+ * of the file seek function.
+ *
+ * SIZE_OVERFLOW: Checks whether a buffer size of type `hsize_t' is too
+ * large to be represented by the `size_t' type.
+ *
+ * REGION_OVERFLOW: Checks whether an address and size pair describe data
+ * which can be addressed entirely by the second
+ * argument of the file seek function.
+ */
+#define MAXADDR (((haddr_t)1<<(8*sizeof(file_offset_t)-1))-1)
+#define ADDR_OVERFLOW(A) (HADDR_UNDEF==(A) || \
+ ((A) & ~(haddr_t)MAXADDR))
+#define SIZE_OVERFLOW(Z) ((Z) & ~(hsize_t)MAXADDR)
+#define REGION_OVERFLOW(A,Z) (ADDR_OVERFLOW(A) || SIZE_OVERFLOW(Z) || \
+ HADDR_UNDEF==(A)+(Z) || \
+ (file_offset_t)((A)+(Z))<(file_offset_t)(A))
+
+/* Prototypes */
+static H5FD_t *H5FD_windows_open(const char *name, unsigned flags, hid_t fapl_id,
+ haddr_t maxaddr);
+static herr_t H5FD_windows_close(H5FD_t *_file);
+static int H5FD_windows_cmp(const H5FD_t *_f1, const H5FD_t *_f2);
+static herr_t H5FD_windows_query(const H5FD_t *_f1, unsigned long *flags);
+static haddr_t H5FD_windows_alloc(H5FD_t *_file, H5FD_mem_t type, hid_t dxpl_id,
+ hsize_t size);
+static haddr_t H5FD_windows_get_eoa(const H5FD_t *_file, H5FD_mem_t type);
+static herr_t H5FD_windows_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr);
+static haddr_t H5FD_windows_get_eof(const H5FD_t *_file);
+static herr_t H5FD_windows_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle);
+static herr_t H5FD_windows_read(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr,
+ size_t size, void *buf);
+static herr_t H5FD_windows_write(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr,
+ size_t size, const void *buf);
+static herr_t H5FD_windows_flush(H5FD_t *_file, hid_t dxpl_id, unsigned closing);
+
+static const H5FD_class_t H5FD_windows_g = {
+ "windows", /*name */
+ MAXADDR, /*maxaddr */
+ H5F_CLOSE_WEAK, /* fc_degree */
+ NULL, /*sb_size */
+ NULL, /*sb_encode */
+ NULL, /*sb_decode */
+ 0, /*fapl_size */
+ NULL, /*fapl_get */
+ NULL, /*fapl_copy */
+ NULL, /*fapl_free */
+ 0, /*dxpl_size */
+ NULL, /*dxpl_copy */
+ NULL, /*dxpl_free */
+ H5FD_windows_open, /*open */
+ H5FD_windows_close, /*close */
+ H5FD_windows_cmp, /*cmp */
+ H5FD_windows_query, /*query */
+// H5FD_windows_alloc, /*alloc */
+ NULL, /*alloc */
+ NULL, /*free */
+ H5FD_windows_get_eoa, /*get_eoa */
+ H5FD_windows_set_eoa, /*set_eoa */
+ H5FD_windows_get_eof, /*get_eof */
+ H5FD_windows_get_handle,/*get_handle */
+ H5FD_windows_read, /*read */
+ H5FD_windows_write, /*write */
+ H5FD_windows_flush, /*flush */
+ NULL, /*lock */
+ NULL, /*unlock */
+ H5FD_FLMAP_SINGLE /*fl_map */
+};
+
+/* Declare a free list to manage the H5FD_windows_t struct */
+H5FL_DEFINE_STATIC(H5FD_windows_t);
+
+/*--------------------------------------------------------------------------
+NAME
+ H5FD_windows_init_interface -- Initialize interface-specific information
+USAGE
+ herr_t H5FD_windows_init_interface()
+
+RETURNS
+ Non-negative on success/Negative on failure
+DESCRIPTION
+ Initializes any interface-specific data or routines. (Just calls
+ H5FD_windows_init currently).
+
+--------------------------------------------------------------------------*/
+static herr_t
+H5FD_windows_init_interface(void)
+{
+ FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5FD_windows_init_interface)
+
+ FUNC_LEAVE_NOAPI(H5FD_windows_init())
+} /* H5FD_windows_init_interface() */
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_init
+ *
+ * Purpose: Initialize this driver by registering the driver with the
+ * library.
+ *
+ * Return: Success: The driver ID for the windows driver.
+ * Failure: Negative.
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24, 2007
+ *
+ *-------------------------------------------------------------------------
+ */
+hid_t
+H5FD_windows_init(void)
+{
+ hid_t ret_value; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_init, FAIL)
+
+ if(H5I_VFL != H5I_get_type(H5FD_WINDOWS_g))
+ H5FD_WINDOWS_g = H5FD_register(&H5FD_windows_g, sizeof(H5FD_class_t));
+
+ /* Set return value */
+ ret_value = H5FD_WINDOWS_g;
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5FD_windows_init() */
+
+/*---------------------------------------------------------------------------
+ * Function: H5FD_windows_term
+ *
+ * Purpose: Shut down the VFD
+ *
+ * Return: <none>
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Quincey Koziol
+ * Thursday, May 24 2007
+ *
+ * Modification:
+ *
+ *---------------------------------------------------------------------------
+ */
+void
+H5FD_windows_term(void)
+{
+ FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5FD_windows_term)
+
+ /* Reset VFL ID */
+ H5FD_WINDOWS_g=0;
+
+ FUNC_LEAVE_NOAPI_VOID
+} /* end H5FD_windows_term() */
+
+/*-------------------------------------------------------------------------
+ * Function: H5Pset_fapl_windows
+ *
+ * Purpose: Modify the file access property list to use the H5FD_WINDOWS
+ * driver defined in this source file. There are no driver
+ * specific properties.
+ *
+ * Return: Non-negative on success/Negative on failure
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+herr_t
+H5Pset_fapl_windows(hid_t fapl_id)
+{
+ H5P_genplist_t *plist; /* Property list pointer */
+ herr_t ret_value;
+
+ FUNC_ENTER_API(H5Pset_fapl_windows, FAIL)
+ H5TRACE1("e", "i", fapl_id);
+
+ if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS)))
+ HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list")
+
+ ret_value= H5P_set_driver(plist, H5FD_WINDOWS, NULL);
+
+done:
+ FUNC_LEAVE_API(ret_value)
+}
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_open
+ *
+ * Purpose: Create and/or opens a Windows file as an HDF5 file.
+ *
+ * Return: Success: A pointer to a new file data structure. The
+ * public fields will be initialized by the
+ * caller, which is always H5FD_open().
+ *
+ * Failure: NULL
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+/* ARGSUSED */
+static H5FD_t *
+H5FD_windows_open(const char *name, unsigned flags, hid_t UNUSED fapl_id,
+ haddr_t maxaddr)
+{
+ FILE *f = NULL;
+ unsigned write_access = 0;
+ H5FD_windows_t *file = NULL;
+ HANDLE filehandle ;
+ struct _BY_HANDLE_FILE_INFORMATION fileinfo;
+ int fd ;
+ h5_stat_t sb ;
+ H5FD_t *ret_value ;
+ __int64 x ;
+
+ FUNC_ENTER_NOAPI(H5FD_windows_open, NULL)
+
+ /* Sanity check on file offsets */
+ assert(sizeof(file_offset_t)>=sizeof(size_t));
+
+ /* Check arguments */
+ if (!name || !*name)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "invalid file name")
+ if (0==maxaddr || HADDR_UNDEF==maxaddr)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADRANGE, NULL, "bogus maxaddr")
+ if (ADDR_OVERFLOW(maxaddr))
+ HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, NULL, "bogus maxaddr")
+
+
+ /* Translate our flags into a mode, and open the file */
+ if (access(name, F_OK) < 0) {
+ if ((flags & H5F_ACC_CREAT) && (flags & H5F_ACC_RDWR)) {
+ f = fopen(name, "wb+");
+ write_access=1; /* Note the write access */
+ }
+ else
+ HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "file doesn't exist and CREAT wasn't specified")
+ } else if ((flags & H5F_ACC_CREAT) && (flags & H5F_ACC_EXCL)) {
+ HSYS_GOTO_ERROR(H5E_FILE, H5E_FILEEXISTS, NULL, "file exists but CREAT and EXCL were specified")
+ } else if (flags & H5F_ACC_RDWR) {
+ if (flags & H5F_ACC_TRUNC)
+ f = fopen(name, "wb+");
+ else
+ f = fopen(name, "rb+");
+ write_access=1; /* Note the write access */
+ } else {
+ f = fopen(name, "rb");
+ }
+ if (!f)
+ HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
+
+ ///* Translate our flags into a mode, and open the file */
+ //if(!access(name, F_OK)) {
+ // /* This means that the file already exists */
+ // switch(flags) {
+ // case H5F_ACC_RDONLY | H5F_ACC_TRUNC:
+ // case H5F_ACC_RDONLY | H5F_ACC_EXCL:
+ // case H5F_ACC_RDWR | H5F_ACC_EXCL:
+ // case H5F_ACC_RDONLY | H5F_ACC_TRUNC | H5F_ACC_EXCL:
+ // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_EXCL:
+ // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_EXCL:
+ // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL:
+ // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL:
+ // /* Error cases */
+ // HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
+ // break;
+
+ // case H5F_ACC_RDWR:
+ // case H5F_ACC_RDWR | H5F_ACC_TRUNC:
+ // case H5F_ACC_RDWR | H5F_ACC_CREAT:
+ // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC:
+ // case H5F_ACC_RDWR | H5F_ACC_TRUNC | H5F_ACC_EXCL:
+ // /* This will open an existing file with r/w access,
+ // and destroy any existing contents */
+ // f = fopen(name, "wb+");
+ // write_access = 1;
+ // break;
+
+ // case H5F_ACC_RDONLY | H5F_ACC_TRUNC | H5F_ACC_CREAT:
+ // /* This will open an existing file with r/w access,
+ // and destroy any existing contents. However,
+ // the user should not be allowed to write. */
+ // f = fopen(name, "wb+");
+ // /* No write access */
+ // break;
+
+ // case H5F_ACC_RDONLY:
+ // case H5F_ACC_RDONLY | H5F_ACC_CREAT:
+ // /* This will open an existing file with r/w access,
+ // keeping existing contents in tact. However,
+ // the users should not be allowed to write. */
+ // f = fopen(name, "rb");
+ // /* no write access */
+ // break;
+
+ // default:
+ // /* Should never get here */
+ // HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
+ // break;
+ // } /* end switch */
+ //} else {
+ // /* This means that the file does not exist */
+ // switch(flags) {
+ // case H5F_ACC_RDONLY:
+ // case H5F_ACC_RDWR:
+ // case H5F_ACC_RDONLY | H5F_ACC_TRUNC:
+ // case H5F_ACC_RDWR | H5F_ACC_TRUNC:
+ // case H5F_ACC_RDONLY | H5F_ACC_EXCL:
+ // case H5F_ACC_RDWR | H5F_ACC_EXCL:
+ // case H5F_ACC_RDONLY | H5F_ACC_TRUNC | H5F_ACC_EXCL:
+ // case H5F_ACC_RDWR | H5F_ACC_TRUNC | H5F_ACC_EXCL:
+ // /* Error cases */
+ // HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
+ // break;
+
+ // case H5F_ACC_RDONLY | H5F_ACC_CREAT:
+ // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_TRUNC:
+ // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_EXCL:
+ // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL:
+ // /* This will create a new file with r/w access,
+ // but the user shouldn't be allowed to write anyway */
+ // f = fopen(name, "wb+");
+ // /* No write access */
+ // break;
+
+ // case H5F_ACC_RDWR | H5F_ACC_CREAT:
+ // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC:
+ // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_EXCL:
+ // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL:
+ // /* This will create a new file with r/w access */
+ // f = fopen(name, "wb+");
+ // write_access = 1;
+ // break;
+
+ // default:
+ // /* Should never get here */
+ // HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
+ // break;
+ // } /* end switch */
+ //} /* end if */
+ if (!f)
+ HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
+
+ if (_stati64(name, &sb) == -1)
+ HSYS_GOTO_ERROR(H5E_FILE, H5E_BADFILE, NULL, "unable to fstat file")
+
+ /* Create the new file struct */
+ if (NULL==(file=H5FL_CALLOC(H5FD_windows_t)))
+ HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "unable to allocate file struct")
+
+ file->fp = f;
+ H5_ASSIGN_OVERFLOW(file->eof,sb.st_size,h5_stat_size_t,haddr_t);
+
+ if(_fseeki64(file->fp, (__int64)0, SEEK_END) == -1) {
+ HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, NULL, "unable to seek in file")
+ }
+ x = _ftelli64(file->fp);
+ assert(x>=0);
+ file->pos = file->eof = (haddr_t)x;
+
+ file->write_access=write_access; /* Note the write_access for later */
+ file->op = OP_UNKNOWN;
+ if((fd = _fileno(f)) == -1)
+ HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get file descriptor for file")
+ if( (filehandle = _get_osfhandle(fd)) == INVALID_HANDLE_VALUE)
+ HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get file handle for file")
+ if(!GetFileInformationByHandle(filehandle, &fileinfo))
+ HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get file information")
+ file->fileindexhi = fileinfo.nFileIndexHigh;
+ file->fileindexlo = fileinfo.nFileIndexLow;
+ file->volumeserialnumber = fileinfo.dwVolumeSerialNumber;
+
+ /* Set return value */
+ ret_value=(H5FD_t*)file;
+
+done:
+ if(ret_value==NULL) {
+ if(f)
+ fclose(file->fp);
+ } /* end if */
+
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_close
+ *
+ * Purpose: Closes a Windows file.
+ *
+ * Return: Success: 0
+ *
+ * Failure: -1, file not closed.
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_windows_close(H5FD_t *_file)
+{
+ H5FD_windows_t *file = (H5FD_windows_t*)_file;
+ herr_t ret_value=SUCCEED; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_close, FAIL)
+
+ if (fclose(file->fp)<0)
+ HSYS_GOTO_ERROR(H5E_IO, H5E_CANTCLOSEFILE, FAIL, "unable to close file")
+
+ H5FL_FREE(H5FD_windows_t,file);
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_cmp
+ *
+ * Purpose: Compares two files belonging to this driver using an
+ * arbitrary (but consistent) ordering.
+ *
+ * Return: Success: A value like strcmp()
+ *
+ * Failure: never fails (arguments were checked by the
+ * caller).
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static int
+H5FD_windows_cmp(const H5FD_t *_f1, const H5FD_t *_f2)
+{
+ const H5FD_windows_t *f1 = (const H5FD_windows_t*)_f1;
+ const H5FD_windows_t *f2 = (const H5FD_windows_t*)_f2;
+ int ret_value=0;
+
+ FUNC_ENTER_NOAPI(H5FD_windows_cmp, H5FD_VFD_DEFAULT)
+
+ if (f1->volumeserialnumber < f2->volumeserialnumber) HGOTO_DONE(-1)
+ if (f1->volumeserialnumber > f2->volumeserialnumber) HGOTO_DONE(1)
+
+ if (f1->fileindexhi < f2->fileindexhi) HGOTO_DONE(-1)
+ if (f1->fileindexhi > f2->fileindexhi) HGOTO_DONE(1)
+
+ if (f1->fileindexlo < f2->fileindexlo) HGOTO_DONE(-1)
+ if (f1->fileindexlo > f2->fileindexlo) HGOTO_DONE(1)
+
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_query
+ *
+ * Purpose: Set the flags that this VFL driver is capable of supporting.
+ * (listed in H5FDpublic.h)
+ *
+ * Return: Success: non-negative
+ *
+ * Failure: negative
+ *
+ * Programmer: Scott Wegner
+ Based on code by Quincey Koziol
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+/* ARGSUSED */
+static herr_t
+H5FD_windows_query(const H5FD_t UNUSED * _f, unsigned long *flags /* out */)
+{
+ herr_t ret_value=SUCCEED;
+
+ FUNC_ENTER_NOAPI(H5FD_windows_query, FAIL)
+
+ /* Set the VFL feature flags that this driver supports */
+ if(flags) {
+ *flags = 0;
+ *flags|=H5FD_FEAT_AGGREGATE_METADATA; /* OK to aggregate metadata allocations */
+ *flags|=H5FD_FEAT_ACCUMULATE_METADATA; /* OK to accumulate metadata for faster writes */
+ *flags|=H5FD_FEAT_DATA_SIEVE; /* OK to perform data sieving for faster raw data reads & writes */
+ *flags|=H5FD_FEAT_AGGREGATE_SMALLDATA; /* OK to aggregate "small" raw data allocations */
+ }
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_get_eoa
+ *
+ * Purpose: Gets the end-of-address marker for the file. The EOA marker
+ * is the first address past the last byte allocated in the
+ * format address space.
+ *
+ * Return: Success: The end-of-address marker.
+ *
+ * Failure: HADDR_UNDEF
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static haddr_t
+H5FD_windows_get_eoa(const H5FD_t *_file, H5FD_mem_t UNUSED type)
+{
+ const H5FD_windows_t *file = (const H5FD_windows_t*)_file;
+ haddr_t ret_value; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_get_eoa, HADDR_UNDEF)
+
+ /* Set return value */
+ ret_value=file->eoa;
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_set_eoa
+ *
+ * Purpose: Set the end-of-address marker for the file. This function is
+ * called shortly after an existing HDF5 file is opened in order
+ * to tell the driver where the end of the HDF5 data is located.
+ *
+ * Return: Success: 0
+ *
+ * Failure: -1
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, July 29, 1999
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_windows_set_eoa(H5FD_t *_file, H5FD_mem_t UNUSED type, haddr_t addr)
+{
+ H5FD_windows_t *file = (H5FD_windows_t*)_file;
+ herr_t ret_value=SUCCEED; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_set_eoa, FAIL)
+
+ file->eoa = addr;
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_get_eof
+ *
+ * Purpose: Returns the end-of-file marker, which is the greater of
+ * either the Windows end-of-file or the HDF5 end-of-address
+ * markers.
+ *
+ * Return: Success: End of file address, the first address past
+ * the end of the "file", either the Unix file
+ * or the HDF5 file.
+ *
+ * Failure: HADDR_UNDEF
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static haddr_t
+H5FD_windows_get_eof(const H5FD_t *_file)
+{
+ const H5FD_windows_t *file = (const H5FD_windows_t*)_file;
+ haddr_t ret_value; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_get_eof, HADDR_UNDEF)
+
+ /* Set return value */
+ ret_value=MAX(file->eof, file->eoa);
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_get_handle
+ *
+ * Purpose: Returns the file handle of windows file driver.
+ *
+ * Returns: Non-negative if succeed or negative if fails.
+ *
+ * Programmer: Scott Wegner
+ Based on code by Raymond Lu
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+/* ARGSUSED */
+static herr_t
+H5FD_windows_get_handle(H5FD_t *_file, hid_t UNUSED fapl, void** file_handle)
+{
+ H5FD_windows_t *file = (H5FD_windows_t *)_file;
+ herr_t ret_value = SUCCEED;
+
+ FUNC_ENTER_NOAPI(H5FD_windows_get_handle, FAIL)
+
+ if(!file_handle)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file handle not valid")
+ *file_handle = &(file->fp);
+ if(*file_handle==NULL)
+ HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "get handle failed")
+
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_alloc
+ *
+ * Purpose: Allocates file memory.
+ *
+ * Return: Success: Address of new memory
+ *
+ * Failure: HADDR_UNDEF
+ *
+ * Programmer: Scott Wegner
+ Based on code by Raymond Lu
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static haddr_t
+H5FD_windows_alloc(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, hsize_t size)
+{
+ H5FD_windows_t *file = (H5FD_windows_t*)_file;
+ haddr_t addr;
+ haddr_t ret_value; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_alloc, HADDR_UNDEF)
+
+ /* Compute the address for the block to allocate */
+ addr = file->eoa;
+
+ /* Check if we need to align this block */
+ if(size >= file->pub.threshold) {
+ /* Check for an already aligned block */
+ if((addr % file->pub.alignment) != 0)
+ addr = ((addr / file->pub.alignment) + 1) * file->pub.alignment;
+ }
+
+
+ file->eoa = addr + size;
+
+ /* Set return value */
+ ret_value = addr;
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+}
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_read
+ *
+ * Purpose: Reads SIZE bytes of data from FILE beginning at address ADDR
+ * into buffer BUF according to data transfer properties in
+ * DXPL_ID.
+ *
+ * Return: Success: Zero. Result is stored in caller-supplied
+ * buffer BUF.
+ *
+ * Failure: -1, Contents of buffer BUF are undefined.
+ *
+ * Programmer: Scott Wegner
+ Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+/* ARGSUSED */
+static herr_t
+H5FD_windows_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, haddr_t addr,
+ size_t size, void *buf/*out*/)
+{
+ H5FD_windows_t *file = (H5FD_windows_t*)_file;
+ ssize_t nbytes;
+ herr_t ret_value=SUCCEED; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_read, FAIL)
+
+ assert(file && file->pub.cls);
+ assert(buf);
+
+ /* Check for overflow conditions */
+ if (HADDR_UNDEF==addr)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined")
+ if (REGION_OVERFLOW(addr, size))
+ HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow")
+ if (addr+size>file->eoa)
+ HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow")
+
+ /* Seek to the correct location */
+ if ((addr!=file->pos || OP_READ!=file->op))
+ if (file_seek(file->fp, (file_offset_t)addr, SEEK_SET) == -1) {
+ file->op = OP_UNKNOWN;
+ file->pos = HADDR_UNDEF;
+ HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position")
+ }
+
+ /*
+ * Read data, being careful of interrupted system calls, partial results,
+ * and the end of the file.
+ */
+ while (size>0) {
+ do {
+ nbytes = fread(buf,(size_t)1,size,file->fp);
+ } while (!nbytes && EINTR==errno);
+ if(!nbytes) {
+ if (ferror(file->fp)) /* error */
+ HSYS_GOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed")
+ if (feof(file->fp)) {
+ /* end of file but not end of format address space */
+ HDmemset(buf, 0, size);
+ break;
+ }
+ }
+ assert(nbytes>=0);
+ assert((size_t)nbytes<=size);
+ H5_CHECK_OVERFLOW(nbytes,ssize_t,size_t);
+ size -= (size_t)nbytes;
+ H5_CHECK_OVERFLOW(nbytes,ssize_t,haddr_t);
+ addr += (haddr_t)nbytes;
+ buf = (char*)buf + nbytes;
+ }
+
+ /* Update current position */
+ file->pos = addr;
+ file->op = OP_READ;
+
+done:
+ if(ret_value<0) {
+ /* Reset last file I/O information */
+ file->pos = HADDR_UNDEF;
+ file->op = OP_UNKNOWN;
+ } /* end if */
+
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_write
+ *
+ * Purpose: Writes SIZE bytes of data to FILE beginning at address ADDR
+ * from buffer BUF according to data transfer properties in
+ * DXPL_ID.
+ *
+ * Return: Success: Zero
+ *
+ * Failure: -1
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+/* ARGSUSED */
+static herr_t
+H5FD_windows_write(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, haddr_t addr,
+ size_t size, const void *buf)
+{
+ H5FD_windows_t *file = (H5FD_windows_t*)_file;
+ ssize_t nbytes;
+ herr_t ret_value=SUCCEED; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_write, FAIL)
+
+ assert(file && file->pub.cls);
+ assert(buf);
+
+ /* Check for overflow conditions */
+ if (HADDR_UNDEF==addr)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined")
+ if (REGION_OVERFLOW(addr, size))
+ HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow")
+ if (addr+size>file->eoa)
+ HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow")
+
+ /* Seek to the correct location */
+ if ((addr!=file->pos || OP_WRITE!=file->op))
+ if (file_seek(file->fp, (file_offset_t)addr, SEEK_SET) == -1) {
+ file->op = OP_UNKNOWN;
+ file->pos = HADDR_UNDEF;
+ HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position")
+ }
+
+ /*
+ * Write the data, being careful of interrupted system calls and partial
+ * results
+ */
+ while (size>0) {
+ do {
+ nbytes = fwrite(buf, 1, size,file->fp);
+ } while (!nbytes && EINTR==errno);
+ if (!nbytes) /* error */
+ HSYS_GOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed")
+ assert(nbytes>0);
+ assert((size_t)nbytes<=size);
+ H5_CHECK_OVERFLOW(nbytes,ssize_t,size_t);
+ size -= (size_t)nbytes;
+ H5_CHECK_OVERFLOW(nbytes,ssize_t,haddr_t);
+ addr += (haddr_t)nbytes;
+ buf = (const char*)buf + nbytes;
+ }
+
+ /* Update current position and eof */
+ file->pos = addr;
+ file->op = OP_WRITE;
+ if (file->pos>file->eof)
+ file->eof = file->pos;
+
+done:
+ if(ret_value<0) {
+ /* Reset last file I/O information */
+ file->pos = HADDR_UNDEF;
+ file->op = OP_UNKNOWN;
+ } /* end if */
+
+ FUNC_LEAVE_NOAPI(ret_value)
+}
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_windows_flush
+ *
+ * Purpose: Makes sure that the true file size is the same (or larger)
+ * than the end-of-address.
+ *
+ * Return: Success: Non-negative
+ *
+ * Failure: Negative
+ *
+ * Programmer: Scott Wegner
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+/* ARGSUSED */
+static herr_t
+H5FD_windows_flush(H5FD_t *_file, hid_t UNUSED dxpl_id, unsigned closing)
+{
+ H5FD_windows_t *file = (H5FD_windows_t*)_file;
+ int fd;
+ herr_t ret_value=SUCCEED; /* Return value */
+
+ FUNC_ENTER_NOAPI(H5FD_windows_flush, FAIL)
+
+ assert(file);
+
+ /* Only try to flush if we have write access */
+ if(!file->write_access)
+ HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "cannot flush without write access")
+
+ /* Extend the file to make sure it's large enough */
+ if((fd = _fileno((FILE*)file->fp)) == -1)
+ HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get file descriptor for file")
+
+ if(_chsize_s(fd, file->eoa))
+ HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly")
+
+ /* Update the eof value */
+ file->eof = file->eoa;
+
+ /* Reset last file I/O information */
+ file->pos = HADDR_UNDEF;
+ file->op = OP_UNKNOWN;
+
+ /* Flush */
+ if(!closing) {
+ if (fflush(file->fp) == EOF)
+ HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "fflush failed")
+ }
+
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+}
diff --git a/windows/src/H5FDwindows.h b/windows/src/H5FDwindows.h new file mode 100644 index 0000000..8277f149 --- /dev/null +++ b/windows/src/H5FDwindows.h @@ -0,0 +1,42 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group. *
+ * Copyright by the Board of Trustees of the University of Illinois. *
+ * All rights reserved. *
+ * *
+ * This file is part of HDF5. The full HDF5 copyright notice, including *
+ * terms governing use, modification, and redistribution, is contained in *
+ * the files COPYING and Copyright.html. COPYING can be found at the root *
+ * of the source code distribution tree; Copyright.html can be found at the *
+ * root level of an installed copy of the electronic HDF5 document set and *
+ * is linked from the top-level documents page. It can also be found at *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
+ * access to either file, you may request a copy from help@hdfgroup.org. *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer: Scott Wegner <swegner@hdfgroup.org>
+ * Based on code by Robb Matzke
+ * Thursday, May 24 2007
+ *
+ * Purpose: The public header file for the windows driver.
+ */
+#ifndef H5FDwindows_H
+#define H5FDwindows_H
+
+#include "H5Ipublic.h"
+
+#define H5FD_WINDOWS (H5FD_windows_init())
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+H5_DLL hid_t H5FD_windows_init(void);
+H5_DLL void H5FD_windows_term(void);
+H5_DLL herr_t H5Pset_fapl_windows(hid_t fapl_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
|