summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--config/powerpc-apple44
-rw-r--r--fortran/src/H5f90i.h3
-rw-r--r--release_docs/RELEASE.txt10
3 files changed, 39 insertions, 18 deletions
diff --git a/config/powerpc-apple b/config/powerpc-apple
index 4c8d0eb..2e49cfc 100644
--- a/config/powerpc-apple
+++ b/config/powerpc-apple
@@ -14,9 +14,6 @@ fi
# Architecture-specific flags
ARCH=
-# Add "_POSIX_C_SOURCE" define to cpp flags, to quiet warnings
-# from /usr/include/sys/cdefs.h
-#CPPFLAGS="$CPPFLAGS -D_POSIX_C_SOURCE=1"
# Omit frame pointer for optimized code?
NOFP=${NOFP:=-fomit-frame-pointer}
@@ -24,14 +21,10 @@ NOFP=${NOFP:=-fomit-frame-pointer}
# Figure out compiler flags
. $srcdir/config/gnu-flags
-# Special setup to use pthread support if enable-threadsafe is on.
-# Works with static executable only.
-#if test "X-" != "X-$enable_threadsafe"; then
-# CFLAGS="$CFLAGS -pthread -D_THREAD_SAFE"
-# LDFLAGS="$LDFLAGS -pthread"
-# LIBS="$LIBS -lcipher"
-# enable_static_exec=yes
-#fi
+ if test "X-$F9X" = "X-f95"; then
+ CFLAGS="$CFLAGS -DH5_ABSOFT"
+ fi
+
# The default Fortran 90 compiler
@@ -52,14 +45,15 @@ SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
OBJECT_NAMELEN_DEFAULT_F=-1
if test "X-" = "X-$F9X"; then
- if test "X-$enable_parallel" = "X-yes"; then
- F9X=mpxlf_r
- else
F9X=xlf
- fi
+ F9X_BASENAME=xlf
+ else
+ F9X_BASENAME=f95
+
fi
-if test "X-" = "X-$f9x_flags_set"; then
+case $F9X_BASENAME in
+ xlf)
F9XSUFFIXFLAG="-qsuffix=f=f90 -qfree=f90"
FFLAGS="$FFLAGS -static -O ${F9XSUFFIXFLAG} -qmoddir=./ "
FSEARCH_DIRS="-I./ -I../src"
@@ -67,4 +61,20 @@ if test "X-" = "X-$f9x_flags_set"; then
PROD_FFLAGS="-O"
PROFILE_FFLAGS="-O"
f9x_flags_set=yes
-fi
+ ;;
+#
+# Assume Absoft compiler
+#
+ f95)
+ F9XSUFFIXFLAG=""
+# We force compiler to use upper case for external names
+# (just in case since this should be a default EIP)
+ FFLAGS="$FFLAGS -YEXT_NAMES=UCS"
+ FSEARCH_DIRS=""
+ DEBUG_FFLAGS="-O"
+ PROD_FFLAGS="-O"
+ PROFILE_FFLAGS="-O"
+ f9x_flags_set=yes
+ ;;
+
+esac
diff --git a/fortran/src/H5f90i.h b/fortran/src/H5f90i.h
index 9eecb7f..2cb439b 100644
--- a/fortran/src/H5f90i.h
+++ b/fortran/src/H5f90i.h
@@ -60,6 +60,9 @@ typedef int int_f;
typedef int hid_t_f;
typedef float real_f;
#define FNAME(x) x
+#if defined H5_ABSOFT
+#define DF_CAPFNAMES
+#endif /*H5_ABSOFT*/
#define _fcdtocp(desc) (desc)
#endif /*APPLE*/
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt
index 89bd875..6ff1171 100644
--- a/release_docs/RELEASE.txt
+++ b/release_docs/RELEASE.txt
@@ -150,8 +150,16 @@ New Features
Support for new platforms, languages and compilers.
=======================================
+ - HDF5 Fortran APIs are supported on Mac OSX with IBM XL Fortran
+ compiler version 8.1. This is a default compiler.
+ - HDF5 Fortran APIs are supported on MAC OSX with Absoft F95 compiler
+ version 8.2; set F9X environment varibale to f95, for example
+ setenv F9X f95
+ Use --disable-shared --enable-static configure flags when Absoft
+ compiler is used.
+ EIP - 2004/07/27
- HDF5 Fortran APIs are supported on MAC OSX with IBM XL Fortran
- Compiler version 8.1 Beta. Use "--disable-shared --enable-static"
+ Compiler version 8.1 Use "--disable-shared --enable-static"
configure flags along with the "--enable-fortran" flag to build
Fortran library. EIP - 2004/01/07
> Tcl is a high-level, general-purpose, interpreted, dynamic programming language. It was designed with the goal of being very simple but powerful.
summaryrefslogtreecommitdiffstats
path: root/compat/zlib/contrib/infback9/infback9.c
blob: 7bbe90ced2ec5f1cdb99c7b1263b7f6faf3d16e2 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
/* infback9.c -- inflate deflate64 data using a call-back interface
 * Copyright (C) 1995-2008 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "zutil.h"
#include "infback9.h"
#include "inftree9.h"
#include "inflate9.h"

#define WSIZE 65536UL

/*
   strm provides memory allocation functions in zalloc and zfree, or
   Z_NULL to use the library memory allocation functions.

   window is a user-supplied window and output buffer that is 64K bytes.
 */
int ZEXPORT inflateBack9Init_(strm, window, version, stream_size)
z_stream FAR *strm;
unsigned char FAR *window;
const char *version;
int stream_size;
{
    struct inflate_state FAR *state;

    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
        stream_size != (int)(sizeof(z_stream)))
        return Z_VERSION_ERROR;
    if (strm == Z_NULL || window == Z_NULL)
        return Z_STREAM_ERROR;
    strm->msg = Z_NULL;                 /* in case we return an error */
    if (strm->zalloc == (alloc_func)0) {
        strm->zalloc = zcalloc;
        strm->opaque = (voidpf)0;
    }
    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
                                               sizeof(struct inflate_state));
    if (state == Z_NULL) return Z_MEM_ERROR;
    Tracev((stderr, "inflate: allocated\n"));
    strm->state = (voidpf)state;
    state->window = window;
    return Z_OK;
}

/*
   Build and output length and distance decoding tables for fixed code
   decoding.
 */
#ifdef MAKEFIXED
#include <stdio.h>

void makefixed9(void)
{
    unsigned sym, bits, low, size;
    code *next, *lenfix, *distfix;
    struct inflate_state state;
    code fixed[544];

    /* literal/length table */
    sym = 0;
    while (sym < 144) state.lens[sym++] = 8;
    while (sym < 256) state.lens[sym++] = 9;
    while (sym < 280) state.lens[sym++] = 7;
    while (sym < 288) state.lens[sym++] = 8;
    next = fixed;
    lenfix = next;
    bits = 9;
    inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work);

    /* distance table */
    sym = 0;
    while (sym < 32) state.lens[sym++] = 5;
    distfix = next;
    bits = 5;
    inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work);

    /* write tables */
    puts("    /* inffix9.h -- table for decoding deflate64 fixed codes");
    puts("     * Generated automatically by makefixed9().");
    puts("     */");
    puts("");
    puts("    /* WARNING: this file should *not* be used by applications.");
    puts("       It is part of the implementation of this library and is");
    puts("       subject to change. Applications should only use zlib.h.");
    puts("     */");
    puts("");
    size = 1U << 9;
    printf("    static const code lenfix[%u] = {", size);
    low = 0;
    for (;;) {
        if ((low % 6) == 0) printf("\n        ");
        printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits,
               lenfix[low].val);
        if (++low == size) break;
        putchar(',');
    }
    puts("\n    };");
    size = 1U << 5;
    printf("\n    static const code distfix[%u] = {", size);
    low = 0;
    for (;;) {
        if ((low % 5) == 0) printf("\n        ");
        printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits,
               distfix[low].val);
        if (++low == size) break;
        putchar(',');
    }
    puts("\n    };");
}
#endif /* MAKEFIXED */

/* Macros for inflateBack(): */

/* Clear the input bit accumulator */
#define INITBITS() \
    do { \
        hold = 0; \
        bits = 0; \
    } while (0)

/* Assure that some input is available.  If input is requested, but denied,
   then return a Z_BUF_ERROR from inflateBack(). */
#define PULL() \
    do { \
        if (have == 0) { \
            have = in(in_desc, &next); \
            if (have == 0) { \
                next = Z_NULL; \
                ret = Z_BUF_ERROR; \
                goto inf_leave; \
            } \
        } \
    } while (0)

/* Get a byte of input into the bit accumulator, or return from inflateBack()
   with an error if there is no input available. */
#define PULLBYTE() \
    do { \
        PULL(); \
        have--; \
        hold += (unsigned long)(*next++) << bits; \
        bits += 8; \
    } while (0)

/* Assure that there are at least n bits in the bit accumulator.  If there is
   not enough available input to do that, then return from inflateBack() with
   an error. */
#define NEEDBITS(n) \
    do { \
        while (bits < (unsigned)(n)) \
            PULLBYTE(); \
    } while (0)

/* Return the low n bits of the bit accumulator (n <= 16) */
#define BITS(n) \
    ((unsigned)hold & ((1U << (n)) - 1))

/* Remove n bits from the bit accumulator */
#define DROPBITS(n) \
    do { \
        hold >>= (n); \
        bits -= (unsigned)(n); \
    } while (0)

/* Remove zero to seven bits as needed to go to a byte boundary */
#define BYTEBITS() \
    do { \
        hold >>= bits & 7; \
        bits -= bits & 7; \
    } while (0)

/* Assure that some output space is available, by writing out the window
   if it's full.  If the write fails, return from inflateBack() with a
   Z_BUF_ERROR. */
#define ROOM() \
    do { \
        if (left == 0) { \
            put = window; \
            left = WSIZE; \
            wrap = 1; \
            if (out(out_desc, put, (unsigned)left)) { \
                ret = Z_BUF_ERROR; \
                goto inf_leave; \
            } \
        } \
    } while (0)

/*
   strm provides the memory allocation functions and window buffer on input,
   and provides information on the unused input on return.  For Z_DATA_ERROR
   returns, strm will also provide an error message.

   in() and out() are the call-back input and output functions.  When
   inflateBack() needs more input, it calls in().  When inflateBack() has
   filled the window with output, or when it completes with data in the
   window, it calls out() to write out the data.  The application must not
   change the provided input until in() is called again or inflateBack()
   returns.  The application must not change the window/output buffer until
   inflateBack() returns.

   in() and out() are called with a descriptor parameter provided in the
   inflateBack() call.  This parameter can be a structure that provides the
   information required to do the read or write, as well as accumulated
   information on the input and output such as totals and check values.

   in() should return zero on failure.  out() should return non-zero on
   failure.  If either in() or out() fails, than inflateBack() returns a
   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
   was in() or out() that caused in the error.  Otherwise,  inflateBack()
   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
   error, or Z_MEM_ERROR if it could not allocate memory for the state.
   inflateBack() can also return Z_STREAM_ERROR if the input parameters
   are not correct, i.e. strm is Z_NULL or the state was not initialized.
 */
int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc)
z_stream FAR *strm;
in_func in;
void FAR *in_desc;
out_func out;
void FAR *out_desc;
{
    struct inflate_state FAR *state;
    unsigned char FAR *next;    /* next input */
    unsigned char FAR *put;     /* next output */
    unsigned have;              /* available input */
    unsigned long left;         /* available output */
    inflate_mode mode;          /* current inflate mode */
    int lastblock;              /* true if processing last block */
    int wrap;                   /* true if the window has wrapped */
    unsigned long write;        /* window write index */
    unsigned char FAR *window;  /* allocated sliding window, if needed */
    unsigned long hold;         /* bit buffer */
    unsigned bits;              /* bits in bit buffer */
    unsigned extra;             /* extra bits needed */
    unsigned long length;       /* literal or length of data to copy */
    unsigned long offset;       /* distance back to copy string from */
    unsigned long copy;         /* number of stored or match bytes to copy */
    unsigned char FAR *from;    /* where to copy match bytes from */
    code const FAR *lencode;    /* starting table for length/literal codes */
    code const FAR *distcode;   /* starting table for distance codes */
    unsigned lenbits;           /* index bits for lencode */
    unsigned distbits;          /* index bits for distcode */
    code here;                  /* current decoding table entry */
    code last;                  /* parent table entry */
    unsigned len;               /* length to copy for repeats, bits to drop */
    int ret;                    /* return code */
    static const unsigned short order[19] = /* permutation of code lengths */
        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
#include "inffix9.h"

    /* Check that the strm exists and that the state was initialized */
    if (strm == Z_NULL || strm->state == Z_NULL)
        return Z_STREAM_ERROR;
    state = (struct inflate_state FAR *)strm->state;

    /* Reset the state */
    strm->msg = Z_NULL;
    mode = TYPE;
    lastblock = 0;
    write = 0;
    wrap = 0;
    window = state->window;
    next = strm->next_in;
    have = next != Z_NULL ? strm->avail_in : 0;
    hold = 0;
    bits = 0;
    put = window;
    left = WSIZE;
    lencode = Z_NULL;
    distcode = Z_NULL;

    /* Inflate until end of block marked as last */
    for (;;)
        switch (mode) {
        case TYPE:
            /* determine and dispatch block type */
            if (lastblock) {
                BYTEBITS();
                mode = DONE;
                break;
            }
            NEEDBITS(3);
            lastblock = BITS(1);
            DROPBITS(1);
            switch (BITS(2)) {
            case 0:                             /* stored block */
                Tracev((stderr, "inflate:     stored block%s\n",
                        lastblock ? " (last)" : ""));
                mode = STORED;
                break;
            case 1:                             /* fixed block */
                lencode = lenfix;
                lenbits = 9;
                distcode = distfix;
                distbits = 5;
                Tracev((stderr, "inflate:     fixed codes block%s\n",
                        lastblock ? " (last)" : ""));
                mode = LEN;                     /* decode codes */
                break;
            case 2:                             /* dynamic block */
                Tracev((stderr, "inflate:     dynamic codes block%s\n",
                        lastblock ? " (last)" : ""));
                mode = TABLE;
                break;
            case 3:
                strm->msg = (char *)"invalid block type";
                mode = BAD;
            }
            DROPBITS(2);
            break;

        case STORED:
            /* get and verify stored block length */
            BYTEBITS();                         /* go to byte boundary */
            NEEDBITS(32);
            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
                strm->msg = (char *)"invalid stored block lengths";
                mode = BAD;
                break;
            }
            length = (unsigned)hold & 0xffff;
            Tracev((stderr, "inflate:       stored length %lu\n",
                    length));
            INITBITS();

            /* copy stored block from input to output */
            while (length != 0) {
                copy = length;
                PULL();
                ROOM();
                if (copy > have) copy = have;
                if (copy > left) copy = left;
                zmemcpy(put, next, copy);
                have -= copy;
                next += copy;
                left -= copy;
                put += copy;
                length -= copy;
            }
            Tracev((stderr, "inflate:       stored end\n"));
            mode = TYPE;
            break;

        case TABLE:
            /* get dynamic table entries descriptor */
            NEEDBITS(14);
            state->nlen = BITS(5) + 257;
            DROPBITS(5);
            state->ndist = BITS(5) + 1;
            DROPBITS(5);
            state->ncode = BITS(4) + 4;
            DROPBITS(4);
            if (state->nlen > 286) {
                strm->msg = (char *)"too many length symbols";
                mode = BAD;
                break;
            }
            Tracev((stderr, "inflate:       table sizes ok\n"));

            /* get code length code lengths (not a typo) */
            state->have = 0;
            while (state->have < state->ncode) {
                NEEDBITS(3);
                state->lens[order[state->have++]] = (unsigned short)BITS(3);
                DROPBITS(3);
            }
            while (state->have < 19)
                state->lens[order[state->have++]] = 0;
            state->next = state->codes;
            lencode = (code const FAR *)(state->next);
            lenbits = 7;
            ret = inflate_table9(CODES, state->lens, 19, &(state->next),
                                &(lenbits), state->work);
            if (ret) {
                strm->msg = (char *)"invalid code lengths set";
                mode = BAD;
                break;
            }
            Tracev((stderr, "inflate:       code lengths ok\n"));

            /* get length and distance code code lengths */
            state->have = 0;
            while (state->have < state->nlen + state->ndist) {
                for (;;) {
                    here = lencode[BITS(lenbits)];
                    if ((unsigned)(here.bits) <= bits) break;
                    PULLBYTE();
                }
                if (here.val < 16) {
                    NEEDBITS(here.bits);
                    DROPBITS(here.bits);
                    state->lens[state->have++] = here.val;
                }
                else {
                    if (here.val == 16) {
                        NEEDBITS(here.bits + 2);
                        DROPBITS(here.bits);
                        if (state->have == 0) {
                            strm->msg = (char *)"invalid bit length repeat";
                            mode = BAD;
                            break;
                        }
                        len = (unsigned)(state->lens[state->have - 1]);
                        copy = 3 + BITS(2);
                        DROPBITS(2);
                    }
                    else if (here.val == 17) {
                        NEEDBITS(here.bits + 3);
                        DROPBITS(here.bits);
                        len = 0;
                        copy = 3 + BITS(3);
                        DROPBITS(3);
                    }
                    else {
                        NEEDBITS(here.bits + 7);
                        DROPBITS(here.bits);
                        len = 0;
                        copy = 11 + BITS(7);
                        DROPBITS(7);
                    }
                    if (state->have + copy > state->nlen + state->ndist) {
                        strm->msg = (char *)"invalid bit length repeat";
                        mode = BAD;
                        break;
                    }
                    while (copy--)
                        state->lens[state->have++] = (unsigned short)len;
                }
            }

            /* handle error breaks in while */
            if (mode == BAD) break;

            /* check for end-of-block code (better have one) */
            if (state->lens[256] == 0) {
                strm->msg = (char *)"invalid code -- missing end-of-block";
                mode = BAD;
                break;
            }

            /* build code tables -- note: do not change the lenbits or distbits
               values here (9 and 6) without reading the comments in inftree9.h
               concerning the ENOUGH constants, which depend on those values */
            state->next = state->codes;
            lencode = (code const FAR *)(state->next);
            lenbits = 9;
            ret = inflate_table9(LENS, state->lens, state->nlen,
                            &(state->next), &(lenbits), state->work);
            if (ret) {
                strm->msg = (char *)"invalid literal/lengths set";
                mode = BAD;
                break;
            }
            distcode = (code const FAR *)(state->next);
            distbits = 6;
            ret = inflate_table9(DISTS, state->lens + state->nlen,
                            state->ndist, &(state->next), &(distbits),
                            state->work);
            if (ret) {
                strm->msg = (char *)"invalid distances set";
                mode = BAD;
                break;
            }
            Tracev((stderr, "inflate:       codes ok\n"));
            mode = LEN;

        case LEN:
            /* get a literal, length, or end-of-block code */
            for (;;) {
                here = lencode[BITS(lenbits)];
                if ((unsigned)(here.bits) <= bits) break;
                PULLBYTE();
            }
            if (here.op && (here.op & 0xf0) == 0) {
                last = here;
                for (;;) {
                    here = lencode[last.val +
                            (BITS(last.bits + last.op) >> last.bits)];
                    if ((unsigned)(last.bits + here.bits) <= bits) break;
                    PULLBYTE();
                }
                DROPBITS(last.bits);
            }
            DROPBITS(here.bits);
            length = (unsigned)here.val;

            /* process literal */
            if (here.op == 0) {
                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
                        "inflate:         literal '%c'\n" :
                        "inflate:         literal 0x%02x\n", here.val));
                ROOM();
                *put++ = (unsigned char)(length);
                left--;
                mode = LEN;
                break;
            }

            /* process end of block */
            if (here.op & 32) {
                Tracevv((stderr, "inflate:         end of block\n"));
                mode = TYPE;
                break;
            }

            /* invalid code */
            if (here.op & 64) {
                strm->msg = (char *)"invalid literal/length code";
                mode = BAD;
                break;
            }

            /* length code -- get extra bits, if any */
            extra = (unsigned)(here.op) & 31;
            if (extra != 0) {
                NEEDBITS(extra);
                length += BITS(extra);
                DROPBITS(extra);
            }
            Tracevv((stderr, "inflate:         length %lu\n", length));

            /* get distance code */
            for (;;) {
                here = distcode[BITS(distbits)];
                if ((unsigned)(here.bits) <= bits) break;
                PULLBYTE();
            }
            if ((here.op & 0xf0) == 0) {
                last = here;
                for (;;) {
                    here = distcode[last.val +
                            (BITS(last.bits + last.op) >> last.bits)];
                    if ((unsigned)(last.bits + here.bits) <= bits) break;
                    PULLBYTE();
                }
                DROPBITS(last.bits);
            }
            DROPBITS(here.bits);
            if (here.op & 64) {
                strm->msg = (char *)"invalid distance code";
                mode = BAD;
                break;
            }
            offset = (unsigned)here.val;

            /* get distance extra bits, if any */
            extra = (unsigned)(here.op) & 15;
            if (extra != 0) {
                NEEDBITS(extra);
                offset += BITS(extra);
                DROPBITS(extra);
            }
            if (offset > WSIZE - (wrap ? 0: left)) {
                strm->msg = (char *)"invalid distance too far back";
                mode = BAD;
                break;
            }
            Tracevv((stderr, "inflate:         distance %lu\n", offset));

            /* copy match from window to output */
            do {
                ROOM();
                copy = WSIZE - offset;
                if (copy < left) {
                    from = put + copy;
                    copy = left - copy;
                }
                else {
                    from = put - offset;
                    copy = left;
                }
                if (copy > length) copy = length;
                length -= copy;
                left -= copy;
                do {
                    *put++ = *from++;
                } while (--copy);
            } while (length != 0);
            break;

        case DONE:
            /* inflate stream terminated properly -- write leftover output */
            ret = Z_STREAM_END;
            if (left < WSIZE) {
                if (out(out_desc, window, (unsigned)(WSIZE - left)))
                    ret = Z_BUF_ERROR;
            }
            goto inf_leave;

        case BAD:
            ret = Z_DATA_ERROR;
            goto inf_leave;

        default:                /* can't happen, but makes compilers happy */
            ret = Z_STREAM_ERROR;
            goto inf_leave;
        }

    /* Return unused input */
  inf_leave:
    strm->next_in = next;
    strm->avail_in = have;
    return ret;
}

int ZEXPORT inflateBack9End(strm)
z_stream FAR *strm;
{
    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
        return Z_STREAM_ERROR;
    ZFREE(strm, strm->state);
    strm->state = Z_NULL;
    Tracev((stderr, "inflate: end\n"));
    return Z_OK;
}