diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 1290 |
1 files changed, 1290 insertions, 0 deletions
diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..d30ff41 --- /dev/null +++ b/Makefile.in @@ -0,0 +1,1290 @@ +# Makefile.in generated by automake 1.15 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2014 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://www.hdfgroup.org/licenses. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# +# This makefile mostly just reinvokes make in the various subdirectories +# but does so in the correct order. You can alternatively invoke make from +# each subdirectory manually. +# +# Top-level HDF5 Makefile(.in) + +# pmake has issues if variables are undefined. Solve this problem in +# top-level Makefile by defining .MAKEFLAGS target to -V before pmake can +# encounter any undefined variables. +# Automake resists putting anything but variable definitions first in +# a Makefile.in, so we'll put a placebo comment here and use sed in +# bin/reconfigure to turn it into the .MAKEFLAGS target. Sigh. -JL 2005 +# Configure should set AM_MAKEFLAGS to -V to solve this problem in +# subdirectories. +# NOTE: This means that invoking pmake in a subdirectory will not work. +#xxx.MAKEFLAGS:@AM_MAKEFLAGS@ +#xxx $(MAKE) all +#xxx +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_fc.m4 \ + $(top_srcdir)/m4/ax_check_class.m4 \ + $(top_srcdir)/m4/ax_check_classpath.m4 \ + $(top_srcdir)/m4/ax_check_java_home.m4 \ + $(top_srcdir)/m4/ax_check_junit.m4 \ + $(top_srcdir)/m4/ax_java_options.m4 \ + $(top_srcdir)/m4/ax_jni_include_dir.m4 \ + $(top_srcdir)/m4/ax_prog_doxygen.m4 \ + $(top_srcdir)/m4/ax_prog_jar.m4 \ + $(top_srcdir)/m4/ax_prog_java.m4 \ + $(top_srcdir)/m4/ax_prog_java_works.m4 \ + $(top_srcdir)/m4/ax_prog_javac.m4 \ + $(top_srcdir)/m4/ax_prog_javac_works.m4 \ + $(top_srcdir)/m4/ax_prog_javadoc.m4 \ + $(top_srcdir)/m4/ax_try_compile_java.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(am__DIST_COMMON) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc +CONFIG_CLEAN_FILES = doxygen/Doxyfile utils/subfiling_vfd/h5fuse.sh +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope distdir dist dist-all distcheck +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/compile \ + $(top_srcdir)/bin/config.guess $(top_srcdir)/bin/config.sub \ + $(top_srcdir)/bin/install-sh $(top_srcdir)/bin/ltmain.sh \ + $(top_srcdir)/bin/missing $(top_srcdir)/config/commence.am \ + $(top_srcdir)/doxygen/Doxyfile.in \ + $(top_srcdir)/utils/subfiling_vfd/h5fuse.sh.in COPYING +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +DIST_TARGETS = dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ + +# H5_CFLAGS holds flags that should be used when building hdf5, +# but which should not be exported to h5cc for building other programs. +# AM_CFLAGS is an automake construct which should be used by Makefiles +# instead of CFLAGS, as CFLAGS is reserved solely for the user to define. +# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. +AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ +AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ +AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ +AM_JAVACFLAGS = @AM_JAVACFLAGS@ +AM_JAVAFLAGS = @AM_JAVAFLAGS@ +AM_JNIFLAGS = @AM_JNIFLAGS@ +AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ +AR = @AR@ +AR_FLAGS = @AR_FLAGS@ +ASSERTS = @ASSERTS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BUILD_MODE = @BUILD_MODE@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_VERSION = @CC_VERSION@ +CFLAGS = @CFLAGS@ +CLANG_SANITIZE_CHECKS = @CLANG_SANITIZE_CHECKS@ +CODESTACK = @CODESTACK@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CXX_VERSION = @CXX_VERSION@ +CYGPATH_W = @CYGPATH_W@ +DEFAULT_API_VERSION = @DEFAULT_API_VERSION@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@ +DESIRED_FILE_LOCKING = @DESIRED_FILE_LOCKING@ +DIAGS = @DIAGS@ +DIMENSION_SCALES_WITH_NEW_REF = @DIMENSION_SCALES_WITH_NEW_REF@ +DIRECT_VFD = @DIRECT_VFD@ +DLLTOOL = @DLLTOOL@ +DOXYGEN_DIR = @DOXYGEN_DIR@ +DOXYGEN_EXAMPLES_DIRECTORY = @DOXYGEN_EXAMPLES_DIRECTORY@ +DOXYGEN_EXTERNAL_SEARCH = @DOXYGEN_EXTERNAL_SEARCH@ +DOXYGEN_HTML_EXTRA_FILES = @DOXYGEN_HTML_EXTRA_FILES@ +DOXYGEN_HTML_EXTRA_STYLESHEET = @DOXYGEN_HTML_EXTRA_STYLESHEET@ +DOXYGEN_HTML_FOOTER = @DOXYGEN_HTML_FOOTER@ +DOXYGEN_HTML_HEADER = @DOXYGEN_HTML_HEADER@ +DOXYGEN_INCLUDE_ALIASES = @DOXYGEN_INCLUDE_ALIASES@ +DOXYGEN_INPUT_DIRECTORY = @DOXYGEN_INPUT_DIRECTORY@ +DOXYGEN_LAYOUT_FILE = @DOXYGEN_LAYOUT_FILE@ +DOXYGEN_MACRO_EXPANSION = @DOXYGEN_MACRO_EXPANSION@ +DOXYGEN_OPTIMIZE_OUTPUT_FOR_C = @DOXYGEN_OPTIMIZE_OUTPUT_FOR_C@ +DOXYGEN_OUTPUT_DIRECTORY = @DOXYGEN_OUTPUT_DIRECTORY@ +DOXYGEN_PACKAGE = @DOXYGEN_PACKAGE@ +DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ +DOXYGEN_PREDEFINED = @DOXYGEN_PREDEFINED@ +DOXYGEN_PROJECT_BRIEF = @DOXYGEN_PROJECT_BRIEF@ +DOXYGEN_PROJECT_LOGO = @DOXYGEN_PROJECT_LOGO@ +DOXYGEN_SEARCHENGINE_URL = @DOXYGEN_SEARCHENGINE_URL@ +DOXYGEN_SERVER_BASED_SEARCH = @DOXYGEN_SERVER_BASED_SEARCH@ +DOXYGEN_STRIP_FROM_INC_PATH = @DOXYGEN_STRIP_FROM_INC_PATH@ +DOXYGEN_STRIP_FROM_PATH = @DOXYGEN_STRIP_FROM_PATH@ +DOXYGEN_TAG_FILE = @DOXYGEN_TAG_FILE@ +DOXYGEN_VERSION_STRING = @DOXYGEN_VERSION_STRING@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +DX_CONFIG = @DX_CONFIG@ +DX_DOCDIR = @DX_DOCDIR@ +DX_DOT = @DX_DOT@ +DX_DOXYGEN = @DX_DOXYGEN@ +DX_DVIPS = @DX_DVIPS@ +DX_EGREP = @DX_EGREP@ +DX_ENV = @DX_ENV@ +DX_FLAG_chi = @DX_FLAG_chi@ +DX_FLAG_chm = @DX_FLAG_chm@ +DX_FLAG_doc = @DX_FLAG_doc@ +DX_FLAG_dot = @DX_FLAG_dot@ +DX_FLAG_html = @DX_FLAG_html@ +DX_FLAG_man = @DX_FLAG_man@ +DX_FLAG_pdf = @DX_FLAG_pdf@ +DX_FLAG_ps = @DX_FLAG_ps@ +DX_FLAG_rtf = @DX_FLAG_rtf@ +DX_FLAG_xml = @DX_FLAG_xml@ +DX_HHC = @DX_HHC@ +DX_LATEX = @DX_LATEX@ +DX_MAKEINDEX = @DX_MAKEINDEX@ +DX_PDFLATEX = @DX_PDFLATEX@ +DX_PERL = @DX_PERL@ +DX_PROJECT = @DX_PROJECT@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +EXTERNAL_FILTERS = @EXTERNAL_FILTERS@ + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ +F9XMODFLAG = @F9XMODFLAG@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FCFLAGS = @FCFLAGS@ +FCFLAGS_f90 = @FCFLAGS_f90@ +FCLIBS = @FCLIBS@ +FC_VERSION = @FC_VERSION@ +FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +Fortran_COMPILER_ID = @Fortran_COMPILER_ID@ +GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ +H5DWALK_CPPFLAGS = @H5DWALK_CPPFLAGS@ +H5DWALK_LDFLAGS = @H5DWALK_LDFLAGS@ +H5DWALK_LIBS = @H5DWALK_LIBS@ +H5_CFLAGS = @H5_CFLAGS@ +H5_CLASSPATH = @H5_CLASSPATH@ +H5_CPPFLAGS = @H5_CPPFLAGS@ +H5_CXXFLAGS = @H5_CXXFLAGS@ +H5_FCFLAGS = @H5_FCFLAGS@ +H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@ +H5_IS_DARWIN = @H5_IS_DARWIN@ +H5_JAVACFLAGS = @H5_JAVACFLAGS@ +H5_JAVAFLAGS = @H5_JAVAFLAGS@ +H5_JNIFLAGS = @H5_JNIFLAGS@ +H5_LDFLAGS = @H5_LDFLAGS@ +H5_TEST_BUILDDIR = @H5_TEST_BUILDDIR@ +H5_UTILS_TEST_BUILDDIR = @H5_UTILS_TEST_BUILDDIR@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HAVE_DMALLOC = @HAVE_DMALLOC@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ +HAVE_LIBHDFS = @HAVE_LIBHDFS@ +HAVE_MERCURY = @HAVE_MERCURY@ +HAVE_PTHREAD = @HAVE_PTHREAD@ +HDF5_DOXYGEN = @HDF5_DOXYGEN@ +HDF5_HL = @HDF5_HL@ +HDF5_HL_TOOLS = @HDF5_HL_TOOLS@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HDF5_TESTS = @HDF5_TESTS@ +HDF5_TOOLS = @HDF5_TOOLS@ +HDF_CXX = @HDF_CXX@ +HDF_FORTRAN = @HDF_FORTRAN@ +HDF_JAVA = @HDF_JAVA@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HL_TOOLS = @HL_TOOLS@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +IGNORE_DISABLED_FILE_LOCKS = @IGNORE_DISABLED_FILE_LOCKS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +INTERNAL_DEBUG_OUTPUT = @INTERNAL_DEBUG_OUTPUT@ +JAR = @JAR@ +JAVA = @JAVA@ +JAVAC = @JAVAC@ +JAVACFLAGS = @JAVACFLAGS@ +JAVADOC = @JAVADOC@ +JAVAFLAGS = @JAVAFLAGS@ +JAVAPREFIX = @JAVAPREFIX@ +JAVA_JUNIT = @JAVA_JUNIT@ +JAVA_PATH_NAME = @JAVA_PATH_NAME@ +JAVA_VERSION = @JAVA_VERSION@ +JNIFLAGS = @JNIFLAGS@ +JNI_LDFLAGS = @JNI_LDFLAGS@ +JUNIT = @JUNIT@ +LARGE_PARALLEL_IO = @LARGE_PARALLEL_IO@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LL_PATH = @LL_PATH@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MAP_API = @MAP_API@ +MEMORYALLOCSANITYCHECK = @MEMORYALLOCSANITYCHECK@ +MIRROR_VFD = @MIRROR_VFD@ +MKDIR_P = @MKDIR_P@ +MPE = @MPE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +OBJEXT = @OBJEXT@ +OPTIMIZATION = @OPTIMIZATION@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ +PAC_FORTRAN_NUM_INTEGER_KINDS = @PAC_FORTRAN_NUM_INTEGER_KINDS@ +PARALLEL = @PARALLEL@ +PARALLEL_FILTERED_WRITES = @PARALLEL_FILTERED_WRITES@ +PARALLEL_TOOLS = @PARALLEL_TOOLS@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PREADWRITE = @PREADWRITE@ +PROFILING = @PROFILING@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +ROS3_VFD = @ROS3_VFD@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SIZE_T = @SIZE_T@ +STATIC_EXEC = @STATIC_EXEC@ +STATIC_SHARED = @STATIC_SHARED@ +STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@ +STRIP = @STRIP@ +SUBFILING_VFD = @SUBFILING_VFD@ +SYMBOLS = @SYMBOLS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTS_JUNIT = @TESTS_JUNIT@ +THREADSAFE = @THREADSAFE@ +TIME = @TIME@ +TR = @TR@ +TRACE_API = @TRACE_API@ +UNAME_INFO = @UNAME_INFO@ +USE_FILE_LOCKING = @USE_FILE_LOCKING@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +USINGMEMCHECKER = @USINGMEMCHECKER@ +VERSION = @VERSION@ +WORDS_BIGENDIAN = @WORDS_BIGENDIAN@ +_ACJNI_JAVAC = @_ACJNI_JAVAC@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +ac_ct_FC = @ac_ct_FC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ + +# Install directories that automake doesn't know about +docdir = $(exec_prefix)/doc +dvidir = @dvidir@ +enable_shared = @enable_shared@ +enable_static = @enable_static@ +examplesdir = @examplesdir@ +exec_prefix = @exec_prefix@ +fmoddir = @fmoddir@ +fortran_linux_linker_option = @fortran_linux_linker_option@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Some machines need a command to run executables; this is that command +# so that our tests will run. +# We use RUNEXEC instead of RUNSERIAL directly because it may be that +# some tests need to be run with a different command. Older versions +# of the makefiles used the command +# $(LIBTOOL) --mode=execute +# in some directories, for instance. +RUNEXEC = $(RUNSERIAL) + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5JNI = $(top_builddir)/java/src/jni/libhdf5_java.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la + +# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below +# has been removed. According to the official description of DESTDIR by GNU at +# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is +# prepended to the normal and complete install path that it precedes for the +# purpose of installing in a temporary directory which is useful for building +# rpms and other packages. The '/' after ${DESTDIR} will be followed by another +# '/' at the beginning of the normal install path. When DESTDIR is empty the +# path then begins with '//', which is incorrect and causes problems at least for +# Cygwin. + +# Scripts used to build examples +# If only shared libraries have been installed, have h5cc build examples with +# shared libraries instead of static libraries +H5CC = ${DESTDIR}$(bindir)/h5cc +H5CC_PP = ${DESTDIR}$(bindir)/h5pcc +H5FC = ${DESTDIR}$(bindir)/h5fc +H5FC_PP = ${DESTDIR}$(bindir)/h5pfc +H5CPP = ${DESTDIR}$(bindir)/h5c++ +ACLOCAL_AMFLAGS = "-I m4" + +# The trace script; this is used on source files from the C library to +# insert tracing macros. +TRACE = perl $(top_srcdir)/bin/trace + +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +# *.clog and *.clog2 are from the MPE option. + +# Some files/directories generated during check that should be cleaned +CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *-tmp +@BUILD_CXX_CONDITIONAL_FALSE@CXX_DIR = + +# Define subdirectories to build. +# Add this directory to SUBDIRS so that examples get built after tools +# but before examples in extra interfaces (c++ and fortran). +# Since we're explicitly listing DIST_SUBDIRS, we also need to list +# directories that are only conditionally built (so that their Makefiles +# are cleaned as well). +# Note that `make clean' will not affect the examples or doc directories. + +# Conditionals. These conditionals are defined during configure +# Define each variable to empty if it is not used to placate pmake +@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++ +@BUILD_FORTRAN_CONDITIONAL_FALSE@FORTRAN_DIR = +@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran +@BUILD_JAVA_CONDITIONAL_FALSE@JAVA_DIR = +@BUILD_JAVA_CONDITIONAL_TRUE@JAVA_DIR = java +@BUILD_HDF5_HL_CONDITIONAL_FALSE@HDF5_HL_DIR = +@BUILD_HDF5_HL_CONDITIONAL_TRUE@HDF5_HL_DIR = hl +@BUILD_TESTS_CONDITIONAL_FALSE@TESTSERIAL_DIR = +@BUILD_TESTS_CONDITIONAL_TRUE@TESTSERIAL_DIR = test +@BUILD_TESTS_PARALLEL_CONDITIONAL_FALSE@TESTPARALLEL_DIR = +@BUILD_TESTS_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar +@BUILD_TOOLS_CONDITIONAL_FALSE@TOOLS_DIR = +@BUILD_TOOLS_CONDITIONAL_TRUE@TOOLS_DIR = tools +SUBDIRS = src $(TESTSERIAL_DIR) $(TESTPARALLEL_DIR) bin $(TOOLS_DIR) utils . \ + $(CXX_DIR) $(FORTRAN_DIR) $(JAVA_DIR) $(HDF5_HL_DIR) + +DIST_SUBDIRS = src test testpar tools utils . c++ fortran hl examples java + +# Some files generated during configure that should be cleaned +DISTCLEANFILES = config/stamp1 config/stamp2 +all: all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; +$(top_srcdir)/config/commence.am $(am__empty): + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): +doxygen/Doxyfile: $(top_builddir)/config.status $(top_srcdir)/doxygen/Doxyfile.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +utils/subfiling_vfd/h5fuse.sh: $(top_builddir)/config.status $(top_srcdir)/utils/subfiling_vfd/h5fuse.sh.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=../.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install-exec: install-exec-recursive +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: installcheck-local + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool \ + mostlyclean-local + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--refresh check check-am clean clean-cscope clean-generic \ + clean-libtool cscope cscopelist-am ctags ctags-am dist \ + dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ + dist-xz dist-zip distcheck distclean distclean-generic \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installcheck-local \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \ + tags-am uninstall uninstall-am + +.PRECIOUS: Makefile + + +# List all build rules defined by HDF5 Makefiles as "PHONY" targets here. +# This tells the Makefiles that these targets are not files to be built but +# commands that should be executed even if a file with the same name already +# exists. +.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ + build-tests check-clean check-install check-p check-s check-vfd \ + check-passthrough-vol install-doc lib progs tests uninstall-doc \ + _exec_check-s _test help trace doxygen + +help: + @$(top_srcdir)/bin/makehelp + +# include Doxygen rules (requires autoconf-archive >2016-03-20) +@DX_RULES@ + +# Define rules for lib, progs, check, and tests. +# These simply involve recursing into subdirectories. +test _test: check + +lib progs check-p check-s: + for d in $(SUBDIRS); do \ + if test $$d != .; then \ + (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# Make all, tests, and (un)install +tests: + for d in $(SUBDIRS); do \ + if test $$d != .; then \ + (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# Check-clean also recurses into examples directory +check-clean: + for d in $(SUBDIRS) examples; do \ + if test $$d != .; then \ + (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + $(RM) -rf prefix-tmp destdir-tmp + +# Some C++ compilers/linkers will create a directory named ii_files in +# the root directory, which should be cleaned. +mostlyclean-local: + if test -d ii_files; then \ + $(RM) -rf ii_files; \ + fi + +# 'make install' will now install examples, the same as 'make install-all'. +# 'make-install-all' will be redundant but will still work. +install: install-recursive install-examples +uninstall: uninstall-recursive uninstall-examples + +# 'make install-all' also installs examples +install-all: + @$(MAKE) $(AM_MAKEFLAGS) install +uninstall-all: + @$(MAKE) $(AM_MAKEFLAGS) uninstall + +# Install examples in this directory and recursively +install-examples uninstall-examples: + for d in examples $(HDF5_INTERFACES) $(HL); do \ + (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + done + +# Placeholder to remind users that docs are now in a separate repository. +install-doc: + @echo "docs no longer live in this tree. Use install-examples to install examples." + +uninstall-doc: + @echo "docs no longer live in this tree. Use install-examples to install examples." + +# `make check-install' or `make installcheck' checks that examples can +# be successfully built +installcheck-local: + if test -n "${DESTDIR}"; then \ + (cd ${DESTDIR}$(bindir) && pwd && ./h5redeploy -force); \ + fi + @(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + +# check-install is just a synonym for installcheck +check-install: installcheck + +# check-all-install tests all installation methods. +# Install via different mechanism and then compare against the default. +# Fine if only libXXX.a files are different since they may have been ranlib'ed. +check-all-install: + @echo Installing to default location + $(MAKE) install + @echo Installing to different prefix location + $(MAKE) prefix=${ROOT}/prefix-tmp install + @echo Compare against the default installation. + @echo Fine if only libXXX.a files are different. + -diff -r prefix-tmp ${prefix} + @echo Installing to different $$\DESTDIR location + env DESTDIR=${ROOT}/destdir-tmp $(MAKE) install + @echo Compare against the default installation. + @echo Fine if only libXXX.a files are different. + -diff -r destdir-tmp${prefix} ${prefix} + +# Only source files in the src directory include tracing information, +# so 'make trace' only needs to recurse into that directory. +trace: + @(cd src && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; + +# doxygen support +@BUILD_DOXYGEN_CONDITIONAL_TRUE@doxygen: doxygen-doc + +# Run tests with different Virtual File Drivers. +# Currently, only invoke check-vfd in the test directory. +check-vfd: + for d in src utils test; do \ + if test $$d != .; then \ + (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# Run tests with different passthrough Virtual Object Layer Connectors. +# NOTE: Will only succeed with passthrough VOL connectors that use +# the native VOL connector as the terminal connector. +check-passthrough-vol: + for d in $(SUBDIRS); do \ + if test $$d != .; then \ + (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# Automake wants to make config.status depend on configure. This +# makes sense, but config.status can't always be regenerated +# properly, which can cause builds to fail. +# This is a problem for our Daily Tests, which need to be able to +# 'make distclean' reliably before running configure. +# The simple solution is to override the dependency Automake supplies +# for config.status so that it will never be regenerated. +$(top_builddir)/config.status: + +# Don't include conclude.am in root Makefile; tests target needs to +# recurse into reguar subdirs. + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |