diff options
Diffstat (limited to 'bin/bbrelease')
| -rwxr-xr-x | bin/bbrelease | 394 |
1 files changed, 394 insertions, 0 deletions
diff --git a/bin/bbrelease b/bin/bbrelease new file mode 100755 index 0000000..c94d7f2 --- /dev/null +++ b/bin/bbrelease @@ -0,0 +1,394 @@ +#!/bin/sh +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. +# + +# Make a release of hdf5. +# +# Programmer: Robb Matzke +# Creation date: on or before 1998-01-29. +# +# Modifications +# Robb Matzke, 1999-07-16 +# The SunOS 5.6 sed *must* have slashes as delimiters. I changed things like +# `sed s+/CVS++' to `sed 's/\/CVS//' +# +# Albert Cheng, 1999-10-26 +# Moved the MANIFEST checking to a separate command file so that +# it can be invoked individually. +# +# Albert Cheng, 2004-08-14 +# Added the --private option. +# +# James Laird, 2005-09-07 +# Added the md5 method. + +# Function definitions +# +# Print Usage page +USAGE() +{ +cat << EOF +Usage: $0 -d <dir> [--docver BRANCHNAME] [-h] [--nocheck] [--private] <methods> ... + -d DIR The name of the directory where the releas(es) should be + placed. + --docver BRANCHNAME This is added for 1.8 and beyond to get the correct + version of documentation files from the hdf5docs + repository. BRANCHNAME for v1.8 should be hdf5_1_8. + -h print the help page. + --nocheck Ignore errors in MANIFEST file. + --private Make a private release with today's date in version information. + --revision Make a private release with the code revision number in version information. + +This must be run at the top level of the source directory. +The other command-line options are the names of the programs to use +for compressing the resulting tar archive (if none are given then +"tar" is assumed): + + tar -- use tar and don't do any compressing. + gzip -- use gzip with "-9" and append ".gz" to the output name. + bzip2 -- use bzip2 with "-9" and append ".bz2" to the output name. + zip -- convert all text files to DOS style and form a zip file for Windows use. + doc -- produce the latest doc tree in addition to the archive. + +An md5 checksum is produced for each archive created and stored in the md5 file. + +Examples: + + $ bin/release -d /tmp + /tmp/hdf5-1.8.13-RELEASE.txt + /tmp/hdf5-1.8.13.md5 + /tmp/hdf5-1.8.13.tar + + $ bin/release -d /tmp gzip + /tmp/hdf5-1.8.13-RELEASE.txt + /tmp/hdf5-1.8.13.md5 + /tmp/hdf5-1.8.13.tar.gz + + $ bin/release -d /tmp tar gzip zip + /tmp/hdf5-1.8.13-RELEASE.txt + /tmp/hdf5-1.8.13.md5 + /tmp/hdf5-1.8.13.tar + /tmp/hdf5-1.8.13.tar.gz + /tmp/hdf5-1.8.13.tar.zip + +EOF + +} + +# Function name: tar2zip +# Convert the release tarball to a Windows zipball. +# +# Programmer: Albert Cheng +# Creation date: 2014-04-23 +# +# Modifications +# +# Steps: +# 1. untar the tarball in a temporay directory; +# Note: do this in a temporary directory to avoid changing +# the original source directory which maybe around. +# 2. convert all its text files to DOS (LF-CR) style; +# 3. form a zip file which is usable by Windows users. +# +# Parameters: +# $1 version +# $2 release tarball +# $3 output zipball file name +# +# Returns 0 if successful; 1 otherwise +# +tar2zip() +{ + if [ $# -ne 3 ]; then + echo "usage: tar2zip <tarfilename> <zipfilename>" + return 1 + fi + ztmpdir=/tmp/tmpdir$$ + mkdir -p $ztmpdir + version=$1 + tarfile=$2 + zipfile=$3 + + # step 1: untar tarball in ztmpdir + (cd $ztmpdir; tar xf -) < $tarfile + # sanity check + if [ ! -d $ztmpdir/$version ]; then + echo "untar did not create $ztmpdir/$version source dir" + # cleanup + rm -rf $ztmpdir + return 1 + fi + # step 2: convert text files + # There maybe a simpler way to do this. + # options used in unix2dos: + # -k Keep the date stamp + # -q quiet mode + # grep redirect output to /dev/null because -q or -s are not portable. + find $ztmpdir/$version | \ + while read inf; do \ + if file $inf | grep "$inf\: .*text" > /dev/null 2>&1 ; then \ + unix2dos -q -k $inf; \ + fi\ + done + # step 3: make zipball + # -9 maximum compression + # -y Store symbolic links as such in the zip archive + # -r recursive + # -q quiet + (cd $ztmpdir; zip -9 -y -r -q $version.zip $version) + mv $ztmpdir/$version.zip $zipfile + + # cleanup + rm -rf $ztmpdir +} + +# This command must be run at the top level of the hdf5 source directory. +# Verify this requirement. +if [ ! \( -f configure -a -f bin/release \) ]; then + echo "$0 must be run at the top level of the hdf5 source directory" + exit 1 +fi + +# Defaults +DEST=releases +VERS=`perl bin/h5vers` +VERS_OLD= +test "$VERS" || exit 1 +verbose=yes +check=yes +release_date=`date +%F` +today=`date +%Y%m%d` +pmode='no' +revmode='no' +tmpdir="../#release_tmp.$$" # tmp work directory +DOC_URL=http://svn.hdfgroup.uiuc.edu/hdf5doc/trunk +CPPLUS_RM_NAME=cpplus_RM + +# Restore previous Version information +RESTORE_VERSION() +{ + if [ X-${VERS_OLD} != X- ]; then + echo restoring version information back to $VERS_OLD + rm -f config/lt_vers.am + cp $tmpdir/lt_vers.am config/lt_vers.am + bin/h5vers -s $VERS_OLD + VERS_OLD= + fi +} + + +# Command-line arguments +while [ -n "$1" ]; do + arg=$1 + shift + case "$arg" in + -d) + DEST=$1 + shift + ;; + --nocheck) + check=no + ;; + -h) + USAGE + exit 0 + ;; + --private) + pmode=yes + ;; + --revision) + revmode=yes + ;; + --docver) + DOCVERSION=$1 + shift + ;; + -*) + echo "Unknown switch: $arg" 1>&2 + USAGE + exit 1 + ;; + *) + methods="$methods $arg" + ;; + esac +done + +# Default method is tar +if [ "X$methods" = "X" ]; then + methods="tar" +fi + +# Create the temporay work directory. +if mkdir $tmpdir; then + echo "temporary work directory for release. "\ + "Can be deleted after release completes." > $tmpdir/README +else + echo "Failed to mkdir tmpdir($tmpdir)" + exit 1 +fi + +# setup restoration in case of abort. +trap RESTORE_VERSION 0 + +if [ X$pmode = Xyes ]; then + VERS_OLD=$VERS + # Copy old version of config/lt_vers.am, since it's hard to + # "undo" changes to it. + cp config/lt_vers.am $tmpdir + # Set version information to m.n.r-of$today. + # (h5vers does not correctly handle just m.n.r-$today.) + VERS=`echo $VERS | sed -e s/-.*//`-of$today + echo Private release of $VERS + bin/h5vers -s $VERS +fi + +if [ X$revmode = Xyes ]; then + VERS_OLD=$VERS + # Copy old version of config/lt_vers.am, since it's hard to + # "undo" changes to it. + cp config/lt_vers.am $tmpdir + branch=`svn info | grep URL: | awk -F/ '{print $NF}'` + revision=`svn info | grep "Last Changed Rev:" | awk '{print $4}'` + # Set version information to m.n.r-r$revision. + # (h5vers does not correctly handle just m.n.r-$today.) + VERS=`echo $VERS | sed -e s/-.*//`-r$revision + echo Private release of $VERS + bin/h5vers -s $VERS + HDF5_VERS=hdf5-$branch-r$revision + HDF5_IN_VERS=hdf5src +else + # Store hdf5-$VERS ("hdf5-1.7.51", e.g.) to a variable to avoid typos + HDF5_VERS=hdf5-$VERS +fi + + +test "$verbose" && echo "Releasing $HDF5_VERS to $DEST" 1>&2 +if [ ! -d $DEST ]; then + echo " Destination directory $DEST does not exist" 1>&2 + exit 1 +fi + +# Check the validity of the MANIFEST file. +bin/chkmanifest || fail=yes +if [ "X$fail" = "Xyes" ]; then + if [ $check = yes ]; then + exit 1 + else + echo "Continuing anyway..." + fi +fi + +# Create a manifest that contains only files for distribution. +MANIFEST=$tmpdir/H5_MANIFEST +grep '^\.' MANIFEST | grep -v _DO_NOT_DISTRIBUTE_ >$MANIFEST + +# Prepare the source tree for a release. +#ln -s `pwd` $tmpdir/$HDF5_VERS || exit 1 +ln -s `pwd` $tmpdir/$HDF5_IN_VERS || exit 1 +# Save a backup copy of Makefile if exists. +test -f Makefile && mv Makefile $tmpdir/Makefile.x +cp -p Makefile.dist Makefile + +# Update README.txt and release_docs/RELEASE.txt with release information in +# line 1. +for f in README.txt release_docs/RELEASE.txt; do + echo "HDF5 version $VERS released on $release_date" >$f.x + sed -e 1d $f >>$f.x + mv $f.x $f + # Make sure new files are of the right access mode + chmod 644 $f +done + +# trunk is different than branches. +if [ "${DOCVERSION}" ]; then + DOC_URL=http://svn.hdfgroup.uiuc.edu/hdf5doc/branches/${DOCVERSION} +fi + +# Create the tar file +test "$verbose" && echo " Running tar..." 1>&2 +( \ + cd $tmpdir; \ + tar cf $HDF5_VERS.tar $HDF5_IN_VERS/Makefile \ + `sed 's/^\.\//'$HDF5_IN_VERS'\//' $MANIFEST` || exit 1 \ +) +# `sed 's/^\.\//hdf5-'$VERS'\//' $MANIFEST` || exit 1 \ + +# Compress +MD5file=$HDF5_VERS.md5 +cp /dev/null $DEST/$MD5file +for comp in $methods; do + case $comp in + tar) + cp -p $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.tar + (cd $DEST; md5sum $HDF5_VERS.tar >> $MD5file) + ;; + gzip) + test "$verbose" && echo " Running gzip..." 1>&2 + gzip -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.gz + (cd $DEST; md5sum $HDF5_VERS.tar.gz >> $MD5file) + ;; + bzip2) + test "$verbose" && echo " Running bzip2..." 1>&2 + bzip2 -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.bz2 + (cd $DEST; md5sum $HDF5_VERS.tar.bz2 >> $MD5file) + ;; + zip) + test "$verbose" && echo " Creating zip ball..." 1>&2 +# tar2zip $HDF5_VERS $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.zip 1>&2 + tar2zip $HDF5_IN_VERS $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.zip 1>&2 + (cd $DEST; md5sum $HDF5_VERS.zip >> $MD5file) + ;; + doc) + if [ "${DOCVERSION}" = "" ]; then + DOCVERSION=trunk + fi + test "$verbose" && echo " Creating docs..." 1>&2 + # Check out docs from svn repo + (cd $tmpdir; svn co $DOC_URL > /dev/null) || exit 1 + # Create doxygen C++ RM + (cd c++/src && doxygen cpp_doc_config > /dev/null ) || exit 1 + # Replace version of C++ RM with just-created version + rm -rf $tmpdir/${DOCVERSION}/html/$CPPLUS_RM_NAME + mv c++/src/$CPPLUS_RM_NAME $tmpdir/${DOCVERSION}/html/$CPPLUS_RM_NAME + # Compress the docs and move them to the release area + mv $tmpdir/$DOCVERSION $tmpdir/${HDF5_VERS}_docs + (cd $tmpdir && tar cf ${HDF5_VERS}_docs.tar ${HDF5_VERS}_docs) + mv $tmpdir/${HDF5_VERS}_docs.tar $DEST + ;; + *) + echo "***Error*** Unknown method $comp" + exit 1 + ;; + esac +done + +# Copy the RELEASE.txt to the release area. +cp release_docs/RELEASE.txt $DEST/$HDF5_VERS-RELEASE.txt + +# Remove distributed Makefile and restore previous Makefile if existed. +rm -f Makefile +test -f $tmpdir/Makefile.x && mv $tmpdir/Makefile.x Makefile + +# Restore OLD version information, then no need for trap. +if [ X$pmode = Xyes ] || [ X$revmode = Xyes ]; then + RESTORE_VERSION + trap 0 +fi + +# Remove temporary things +rm -rf $tmpdir + +exit 0 |