diff options
Diffstat (limited to 'bin/bbrelease')
| -rwxr-xr-x | bin/bbrelease | 238 |
1 files changed, 93 insertions, 145 deletions
diff --git a/bin/bbrelease b/bin/bbrelease index a45be2e..d056f6d 100755 --- a/bin/bbrelease +++ b/bin/bbrelease @@ -14,32 +14,13 @@ # Make a release of hdf5. # -# Programmer: Robb Matzke -# Creation date: on or before 1998-01-29. +# NOTE: +# This script differs from bin/release in that this has an added +# --revision option to create private releases with the code revision +# hash in the version strings. # -# Modifications -# Robb Matzke, 1999-07-16 -# The SunOS 5.6 sed *must* have slashes as delimiters. I changed things like -# `sed s+/CVS++' to `sed 's/\/CVS//' -# -# Albert Cheng, 1999-10-26 -# Moved the MANIFEST checking to a separate command file so that -# it can be invoked individually. -# -# Albert Cheng, 2004-08-14 -# Added the --private option. -# -# James Laird, 2005-09-07 -# Added the md5 method. -# -# Larry Knox, 2016-08-30 -# Added the --revision option to create private releases with the -# code revision hash in the version strings. Currently the version -# of this script with the --revision option is named bbrelease. It -# can probably be merged into the original release script in the -# future. -# Commands to get the revision hash have now been converted to git -# to match the source repository change. +# This script can probably be merged into the original release script in +# the future. # Function definitions # @@ -47,26 +28,25 @@ USAGE() { cat << EOF -Usage: $0 -d <dir> [--docver BRANCHNAME] [-h] [--nocheck] [--private] <methods> ... - -d DIR The name of the directory where the release(s) should be +Usage: $0 -d <dir> [--docver BRANCHNAME] [-h] [--private] [--revision] <methods> ... + -d DIR The name of the directory where the release(s) should be placed. --docver BRANCHNAME This is added for 1.8 and beyond to get the correct version of documentation files from the hdf5docs repository. BRANCHNAME for v1.8 should be hdf5_1_8. -h print the help page. - --nocheck Ignore errors in MANIFEST file. - --private Make a private release with today's date in version information. - --revision Make a private release with the code revision number in version information. - + --private Make a private release with today's date in version information. + --revision Make a private release with the code revision number in version information. + This must be run at the top level of the source directory. The other command-line options are the names of the programs to use for compressing the resulting tar archive (if none are given then "tar" is assumed): - tar -- use tar and don't do any compressing. - gzip -- use gzip with "-9" and append ".gz" to the output name. + tar -- use tar and don't do any compressing. + gzip -- use gzip with "-9" and append ".gz" to the output name. bzip2 -- use bzip2 with "-9" and append ".bz2" to the output name. - zip -- convert all text files to DOS style and form a zip file for Windows use. + zip -- convert all text files to DOS style and form a zip file for Windows use. doc -- produce the latest doc tree in addition to the archive. An md5 checksum is produced for each archive created and stored in the md5 file. @@ -97,15 +77,10 @@ EOF # Function name: tar2zip # Convert the release tarball to a Windows zipball. # -# Programmer: Albert Cheng -# Creation date: 2014-04-23 -# -# Modifications -# # Steps: # 1. untar the tarball in a temporary directory; # Note: do this in a temporary directory to avoid changing -# the original source directory which maybe around. +# the original source directory which may be around. # 2. convert all its text files to DOS (LF-CR) style; # 3. form a zip file which is usable by Windows users. # @@ -119,8 +94,8 @@ EOF tar2zip() { if [ $# -ne 3 ]; then - echo "usage: tar2zip <tarfilename> <zipfilename>" - return 1 + echo "usage: tar2zip <tarfilename> <zipfilename>" + return 1 fi ztmpdir=/tmp/tmpdir$$ mkdir -p $ztmpdir @@ -132,23 +107,23 @@ tar2zip() (cd $ztmpdir; tar xf -) < $tarfile # sanity check if [ ! -d $ztmpdir/$version ]; then - echo "untar did not create $ztmpdir/$version source dir" - # cleanup - rm -rf $ztmpdir - return 1 + echo "untar did not create $ztmpdir/$version source dir" + # cleanup + rm -rf $ztmpdir + return 1 fi # step 2: convert text files # There maybe a simpler way to do this. # options used in unix2dos: - # -k Keep the date stamp + # -k Keep the date stamp # -q quiet mode # grep redirect output to /dev/null because -q or -s are not portable. find $ztmpdir/$version | \ - while read inf; do \ - if file $inf | grep "$inf\: .*text" > /dev/null 2>&1 ; then \ - unix2dos -q -k $inf; \ - fi\ - done + while read inf; do \ + if file $inf | grep "$inf\: .*text" > /dev/null 2>&1 ; then \ + unix2dos -q -k $inf; \ + fi\ + done # step 3: make zipball # -9 maximum compression # -y Store symbolic links as such in the zip archive @@ -163,14 +138,6 @@ tar2zip() # This command must be run at the top level of the hdf5 source directory. # Verify this requirement. -# Since we are running bbrelease to create an HDF5 source tarfile for buildbot -# testing with source that is not for release, there is not a file named -# "configure" but there will be one named "configure.ac". The "configure" -# file will be created when autogen.sh runs. There probably will always -# be a bin/release file, but just in case it is removed, we can check for -# this script, bbrelease, in the bin directory. The bin/release script should -# continue to check for "configure" because it should be present in release -# source. if [ ! \( -f configure.ac -a -f bin/bbrelease \) ]; then echo "$0 must be run at the top level of the hdf5 source directory" exit 1 @@ -182,12 +149,11 @@ VERS=`perl bin/h5vers` VERS_OLD= test "$VERS" || exit 1 verbose=yes -check=yes release_date=`date +%F` today=`date +%Y%m%d` pmode='no' revmode='no' -tmpdir="../#release_tmp.$$" # tmp work directory +tmpdir="../#release_tmp.$$" # tmp work directory DOC_URL=https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5doc.git CPPLUS_RM_NAME=cpplus_RM @@ -195,11 +161,11 @@ CPPLUS_RM_NAME=cpplus_RM RESTORE_VERSION() { if [ X-${VERS_OLD} != X- ]; then - echo restoring version information back to $VERS_OLD - rm -f config/lt_vers.am - cp $tmpdir/lt_vers.am config/lt_vers.am - bin/h5vers -s $VERS_OLD - VERS_OLD= + echo restoring version information back to $VERS_OLD + rm -f config/lt_vers.am + cp $tmpdir/lt_vers.am config/lt_vers.am + bin/h5vers -s $VERS_OLD + VERS_OLD= fi } @@ -209,20 +175,17 @@ while [ -n "$1" ]; do arg=$1 shift case "$arg" in - -d) - DEST=$1 - shift - ;; - --nocheck) - check=no - ;; - -h) - USAGE - exit 0 - ;; - --private) - pmode=yes - ;; + -d) + DEST=$1 + shift + ;; + -h) + USAGE + exit 0 + ;; + --private) + pmode=yes + ;; --revision) revmode=yes ;; @@ -230,14 +193,14 @@ while [ -n "$1" ]; do DOCVERSION=$1 shift ;; - -*) - echo "Unknown switch: $arg" 1>&2 - USAGE - exit 1 - ;; - *) - methods="$methods $arg" - ;; + -*) + echo "Unknown switch: $arg" 1>&2 + USAGE + exit 1 + ;; + *) + methods="$methods $arg" + ;; esac done @@ -278,7 +241,7 @@ if [ X$revmode = Xyes ]; then cp config/lt_vers.am $tmpdir branch=`git branch | grep '*' | awk '{print $NF}'` revision=`git rev-parse --short HEAD` -# Set version information to m.n.r-r$revision. + # Set version information to m.n.r-r$revision. # (h5vers does not correctly handle just m.n.r-$today.) VERS=`echo $VERS | sed -e s/-.*//`-$revision echo Private release of $VERS @@ -299,23 +262,10 @@ if [ ! -d $DEST ]; then exit 1 fi -# Check the validity of the MANIFEST file. -bin/chkmanifest || fail=yes -if [ "X$fail" = "Xyes" ]; then - if [ $check = yes ]; then - exit 1 - else - echo "Continuing anyway..." - fi -fi - -# Create a manifest that contains only files for distribution. -MANIFEST=$tmpdir/H5_MANIFEST -grep '^\.' MANIFEST | grep -v _DO_NOT_DISTRIBUTE_ >$MANIFEST - -# Prepare the source tree for a release. -#ln -s `pwd` $tmpdir/$HDF5_VERS || exit 1 +# Create a symlink to the source so files in the tarball have the prefix +# we want (gnu's --transform isn't portable) ln -s `pwd` $tmpdir/$HDF5_IN_VERS || exit 1 + # Save a backup copy of Makefile if exists. test -f Makefile && mv Makefile $tmpdir/Makefile.x cp -p Makefile.dist Makefile @@ -330,64 +280,60 @@ for f in README.md release_docs/RELEASE.txt; do chmod 644 $f done -# trunk is different than branches. +# develop is different than branches. if [ "${DOCVERSION}" ]; then DOC_URL=https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5doc.git -b ${DOCVERSION} fi # Create the tar file test "$verbose" && echo " Running tar..." 1>&2 -( \ - cd $tmpdir; \ - tar cf $HDF5_VERS.tar $HDF5_IN_VERS/Makefile \ - `sed 's/^\.\//'$HDF5_IN_VERS'\//' $MANIFEST` || exit 1 \ -) +(cd "$tmpdir" && exec tar -ch --exclude-vcs -f "$HDF5_VERS.tar" "./$HDF5_IN_VERS" || exit 1 ) # Compress MD5file=$HDF5_VERS.md5 cp /dev/null $DEST/$MD5file for comp in $methods; do case $comp in - tar) - cp -p $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.tar - (cd $DEST; md5sum $HDF5_VERS.tar >> $MD5file) - ;; - gzip) - test "$verbose" && echo " Running gzip..." 1>&2 - gzip -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.gz - (cd $DEST; md5sum $HDF5_VERS.tar.gz >> $MD5file) - ;; - bzip2) - test "$verbose" && echo " Running bzip2..." 1>&2 - bzip2 -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.bz2 - (cd $DEST; md5sum $HDF5_VERS.tar.bz2 >> $MD5file) - ;; - zip) - test "$verbose" && echo " Creating zip ball..." 1>&2 - tar2zip $HDF5_IN_VERS $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.zip 1>&2 - (cd $DEST; md5sum $HDF5_VERS.zip >> $MD5file) - ;; - doc) + tar) + cp -p $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.tar + (cd $DEST; md5sum $HDF5_VERS.tar >> $MD5file) + ;; + gzip) + test "$verbose" && echo " Running gzip..." 1>&2 + gzip -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.gz + (cd $DEST; md5sum $HDF5_VERS.tar.gz >> $MD5file) + ;; + bzip2) + test "$verbose" && echo " Running bzip2..." 1>&2 + bzip2 -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.bz2 + (cd $DEST; md5sum $HDF5_VERS.tar.bz2 >> $MD5file) + ;; + zip) + test "$verbose" && echo " Creating zip ball..." 1>&2 + tar2zip $HDF5_IN_VERS $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.zip 1>&2 + (cd $DEST; md5sum $HDF5_VERS.zip >> $MD5file) + ;; + doc) if [ "${DOCVERSION}" = "" ]; then DOCVERSION=master fi - test "$verbose" && echo " Creating docs..." 1>&2 - # Check out docs from git repo - (cd $tmpdir; git clone $DOC_URL > /dev/null) || exit 1 - # Create doxygen C++ RM - (cd c++/src && doxygen cpp_doc_config > /dev/null ) || exit 1 - # Replace version of C++ RM with just-created version + test "$verbose" && echo " Creating docs..." 1>&2 + # Check out docs from git repo + (cd $tmpdir; git clone $DOC_URL > /dev/null) || exit 1 + # Create doxygen C++ RM + (cd c++/src && doxygen cpp_doc_config > /dev/null ) || exit 1 + # Replace version of C++ RM with just-created version rm -rf $tmpdir/${DOCVERSION}/html/$CPPLUS_RM_NAME mv c++/src/$CPPLUS_RM_NAME $tmpdir/${DOCVERSION}/html/$CPPLUS_RM_NAME # Compress the docs and move them to the release area mv $tmpdir/$DOCVERSION $tmpdir/${HDF5_VERS}_docs - (cd $tmpdir && tar cf ${HDF5_VERS}_docs.tar ${HDF5_VERS}_docs) - mv $tmpdir/${HDF5_VERS}_docs.tar $DEST - ;; - *) - echo "***Error*** Unknown method $comp" - exit 1 - ;; + (cd $tmpdir && tar cf ${HDF5_VERS}_docs.tar ${HDF5_VERS}_docs) + mv $tmpdir/${HDF5_VERS}_docs.tar $DEST + ;; + *) + echo "***Error*** Unknown method $comp" + exit 1 + ;; esac done @@ -408,4 +354,6 @@ fi # Remove temporary things rm -rf $tmpdir +echo "DONE" + exit 0 |