diff options
Diffstat (limited to 'bin/ltmain.sh')
| -rw-r--r-- | bin/ltmain.sh | 7559 |
1 files changed, 4252 insertions, 3307 deletions
diff --git a/bin/ltmain.sh b/bin/ltmain.sh index 06823e0..a8b3f1c 100644 --- a/bin/ltmain.sh +++ b/bin/ltmain.sh @@ -1,30 +1,148 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify +# Generated from ltmain.m4sh. + +# ltmain.sh (GNU libtool) 2.2.2 +# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # -# This program is distributed in the hope that it will be useful, but +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print informational messages (default) +# --version print version information +# -h, --help print short or long help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: # -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.2 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to <bug-libtool@gnu.org>. + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=2.2.2 +TIMESTAMP="" +package_revision=1.2627 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done -basename="s,^.*/,,g" +$lt_unset CDPATH + + + + + +: ${CP="cp -f"} +: ${ECHO="echo"} +: ${EGREP="/usr/bin/grep -E"} +: ${FGREP="/usr/bin/grep -F"} +: ${GREP="/usr/bin/grep"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SED="/opt/local/bin/gsed"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of @@ -34,36 +152,388 @@ basename="s,^.*/,,g" progpath="$0" # The name of this program: -progname=`echo "$progpath" | $SED $basename` -modename="$progname" +# In the unlikely event $progname began with a '-', it would play havoc with +# func_echo (imagine progname=-n), so we prepend ./ in that case: +progname=`$ECHO "X$progpath" | $Xsed -e "$basename" -e 's,^-,./-,'` + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=`$ECHO "X$progpath" | $Xsed -e "$dirname"` + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=: + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname${mode+: }$mode: $*" +} -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.5.22 -TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes. -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` + done + my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else -# Check that we have a working $echo. + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "X$my_tmpdir" | $Xsed +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "X$1" | $Xsed \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + + + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $SED -n '/^# Usage:/,/# -h/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + $ECHO + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help +# Echo long help message to standard output and exit. +func_help () +{ + $SED -n '/^# Usage:/,/# Report bugs to/ { + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p + }' < "$progpath" + exit $? +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + func_error "missing argument for $1" + exit_cmd=exit +} + +exit_cmd=: + + + + + +# Check that we have a working $ECHO. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then + # Yippee, $ECHO works! : else - # Restart under the correct shell, and then maybe $echo will work. + # Restart under the correct shell, and then maybe $ECHO will work. exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi @@ -76,105 +546,610 @@ EOF exit $EXIT_SUCCESS fi -default_mode= -help="Try \`$progname --help' for more information." magic="%%%MAGIC variable%%%" -mkdir="mkdir" -mv="mv -f" -rm="rm -f" - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - SP2NL='tr \040 \012' - NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - SP2NL='tr \100 \n' - NL2SP='tr \r\n \100\100' - ;; -esac - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -# We save the old values to restore during execute mode. -if test "${LC_ALL+set}" = set; then - save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL -fi -if test "${LANG+set}" = set; then - save_LANG="$LANG"; LANG=C; export LANG -fi - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" - -if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - $echo "$modename: not configured to build any kind of library" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE -fi +magic_exe="%%%MAGIC EXE variable%%%" # Global variables. -mode=$default_mode +# $mode is unset nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= execute_dlfiles= -duplicate_deps=no preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 -##################################### -# Shell function definitions: -# This seems to be the best place for them +opt_dry_run=false +opt_duplicate_deps=false +opt_silent=false +opt_debug=: -# func_mktempdir [string] -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. -func_mktempdir () +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () { - my_template="${TMPDIR-/tmp}/${1-$progname}" + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} - if test "$run" = ":"; then - # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + $ECHO "host: $host" + if test "$build_libtool_libs" = yes; then + $ECHO "enable shared libraries" + else + $ECHO "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $ECHO "enable static libraries" else + $ECHO "disable static libraries" + fi - # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + exit $? +} - if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" - save_mktempdir_umask=`umask` - umask 0077 - $mkdir "$my_tmpdir" - umask $save_mktempdir_umask + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" fi + ;; + esac +} - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || { - $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 - exit $EXIT_FAILURE - } + +func_mode_help () +{ + # We need to display help for each of the modes. + case $mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$mode'" + ;; + esac + + $ECHO + $ECHO "Try \`$progname --help' for more information about other modes." + + exit $? +} + +# Generated shell functions inserted here. + + +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. +{ + + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + + # Parse non-mode specific arguments: + while test "$#" -gt 0; do + opt="$1" + shift + + case $opt in + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" + func_echo "enabling shell trace mode" + opt_debug='set -x' + $opt_debug + ;; + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" + shift + ;; + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" + shift + ;; + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" + opt_silent=: + ;; + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false + ;; + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here + shift + ;; + + # Separate optargs to long options: + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} + shift + ;; + + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; + + *) nonopt="$opt" + break + ;; + esac + done + + # Now that we've collected a possible --mode arg, show help if necessary + $opt_help && func_mode_help + + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + ;; + esac + + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +## ----------- ## +## Main. ## +## ----------- ## + +{ + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$mode' for more information." +} + + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" fi +} - $echo "X$my_tmpdir" | $Xsed +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac } @@ -186,6 +1161,7 @@ func_mktempdir () # that is supplied when $file_magic_command is called. func_win32_libid () { + $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in @@ -193,10 +1169,17 @@ func_win32_libid () win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ - $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | \ - $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; @@ -214,10 +1197,11 @@ func_win32_libid () esac ;; esac - $echo $win32_libid_type + $ECHO "$win32_libid_type" } + # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. @@ -226,39 +1210,32 @@ func_win32_libid () # arg is usually of the form 'gcc ...' func_infer_tag () { + $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" done case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do - # Double-quote args containing other shell metacharacters. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done + # Double-quote args containing other shell metacharacters. + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done case "$@ " in - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. @@ -272,11 +1249,10 @@ func_infer_tag () # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then - $echo "$modename: unable to infer tagged configuration" - $echo "$modename: specify a tag with \`--tag'" 1>&2 - exit $EXIT_FAILURE -# else -# $echo "$modename: using $tagname tagged configuration" + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" fi ;; esac @@ -284,41 +1260,292 @@ func_infer_tag () } + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin | *mingw* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 </dev/null >/dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + $ECHO >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +" + case $host in + *cygwin* | *mingw* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +$lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + $ECHO >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) symtab_cflags="$symtab_cflags $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi +} + # func_extract_an_archive dir oldlib func_extract_an_archive () { + $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" - - $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" - $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else - $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } + # func_extract_archives gentop oldlib ... func_extract_archives () { + $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" - my_status="" - - $show "${rm}r $my_gentop" - $run ${rm}r "$my_gentop" - $show "$mkdir $my_gentop" - $run $mkdir "$my_gentop" - my_status=$? - if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then - exit $my_status - fi for my_xlib in $my_oldlibs; do # Extract the objects. @@ -326,41 +1553,46 @@ func_extract_archives () [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac - my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xdir="$my_gentop/$my_xlib" - - $show "${rm}r $my_xdir" - $run ${rm}r "$my_xdir" - $show "$mkdir $my_xdir" - $run $mkdir "$my_xdir" - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then - exit $exit_status - fi + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + extracted_serial=`expr $extracted_serial + 1` + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + case $host in *-darwin*) - $show "Extracting $my_xabs" + func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run - if test -z "$run"; then + $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` - darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` - darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` - if test -n "$darwin_arches"; then - darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= - $show "$darwin_base_archive has multiple architectures $darwin_arches" + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do - mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" - $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches - ## Okay now we have a bunch of thin objects, gotta fatten them up :) + ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` darwin_file= darwin_files= @@ -368,259 +1600,67 @@ func_extract_archives () darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` lipo -create -output "$darwin_file" $darwin_files done # $darwin_filelist - ${rm}r unfat-$$ + $RM -rf unfat-$$ cd "$darwin_orig_dir" else - cd "$darwin_orig_dir" - func_extract_an_archive "$my_xdir" "$my_xabs" + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches - fi # $run + } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" - ;; + ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done + func_extract_archives_result="$my_oldobjs" } -# End of Shell function definitions -##################################### -# Darwin sucks -eval std_shrext=\"$shrext_cmds\" -disable_libs=no -# Parse our command line options once, thoroughly. -while test "$#" -gt 0 -do - arg="$1" - shift - - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - tag) - tagname="$arg" - preserve_args="${preserve_args}=$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - $echo "$progname: invalid tag name: $tagname" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" - else - $echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; - - --version) - $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - $echo - $echo "Copyright (C) 2005 Free Software Foundation, Inc." - $echo "This is free software; see the source for copying conditions. There is NO" - $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit $? - ;; - - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath - # Now print the configurations for the tags. - for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" - done - exit $? - ;; - - --debug) - $echo "$progname: enabling shell trace mode" - set -x - preserve_args="$preserve_args $arg" - ;; - - --dry-run | -n) - run=: - ;; - - --features) - $echo "host: $host" +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} if test "$build_libtool_libs" = yes; then - $echo "enable shared libraries" + write_lobj=\'${2}\' else - $echo "disable shared libraries" + write_lobj=none fi + if test "$build_old_libs" = yes; then - $echo "enable static libraries" + write_oldobj=\'${3}\' else - $echo "disable static libraries" + write_oldobj=none fi - exit $? - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --preserve-dup-deps) duplicate_deps="yes" ;; - - --quiet | --silent) - show=: - preserve_args="$preserve_args $arg" - ;; - - --tag) - prevopt="--tag" - prev=tag - preserve_args="$preserve_args --tag" - ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - preserve_args="$preserve_args --tag" - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE -fi - -case $disable_libs in -no) - ;; -shared) - build_libtool_libs=no - build_old_libs=yes - ;; -static) - build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` - ;; -esac - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 - $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 - case $nonopt in - *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute + $opt_dry_run || { + cat >${write_libobj}T <<EOF +# $write_libobj - a libtool object file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi +# Name of the PIC object. +pic_object=$write_lobj - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi +# Name of the non-PIC object +non_pic_object=$write_oldobj - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." +EOF + mv -f "${write_libobj}T" "${write_libobj}" + } +} - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" @@ -629,6 +1669,7 @@ if test -z "$show_help"; then arg_mode=normal libobj= later= + pie_flag= for arg do @@ -649,15 +1690,18 @@ if test -z "$show_help"; then # Accept any command-line options. case $arg in -o) - if test -n "$libobj" ; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit $EXIT_FAILURE - fi + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; - -static | -prefer-pic | -prefer-non-pic) + -pie | -fpie | -fPIE) + pie_flag="$pie_flag $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) later="$later $arg" continue ;; @@ -673,31 +1717,25 @@ if test -z "$show_help"; then ;; # replaced later. I would guess that would be a bug. -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' - for arg in $args; do + for arg in $args; do IFS="$save_ifs" - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" + func_quote_for_eval "$arg" + lastarg="$lastarg $func_quote_for_eval_result" done IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result # Add the arguments to base_compile. base_compile="$base_compile $lastarg" continue ;; - * ) + *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # @@ -709,35 +1747,23 @@ if test -z "$show_help"; then esac # case $arg_mode # Aesthetically quote the previous argument. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - case $lastarg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, and some SunOS ksh mistreat backslash-escaping - # in scan sets (worked around with variable expansion), - # and furthermore cannot handle '|' '&' '(' ')' in scan sets - # at all, so we specify them separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" - ;; - esac - - base_compile="$base_compile $lastarg" + func_quote_for_eval "$lastarg" + base_compile="$base_compile $func_quote_for_eval_result" done # for arg case $arg_mode in arg) - $echo "$modename: you must specify an argument for -Xcompile" - exit $EXIT_FAILURE + func_fatal_error "you must specify an argument for -Xcompile" ;; target) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. - [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } ;; esac @@ -755,18 +1781,19 @@ if test -z "$show_help"; then *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; + *.[fF][09]?) xform='[fF][09].' ;; *.for) xform=for ;; *.java) xform=java ;; + *.obj) xform=obj ;; + *.sx) xform=sx ;; esac - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + libobj=`$ECHO "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac @@ -774,7 +1801,15 @@ if test -z "$show_help"; then for arg in $later; do case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + -static) + build_libtool_libs=no build_old_libs=yes continue ;; @@ -791,28 +1826,17 @@ if test -z "$show_help"; then esac done - qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` - case $qlibobj in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qlibobj="\"$qlibobj\"" ;; - esac - test "X$libobj" != "X$qlibobj" \ - && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then @@ -821,8 +1845,8 @@ if test -z "$show_help"; then removelist="$lobj $libobj ${libobj}T" fi - $run $rm $removelist - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || $RM $removelist + trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in @@ -838,10 +1862,10 @@ if test -z "$show_help"; then # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15 else output_obj= need_locks=no @@ -851,13 +1875,13 @@ if test -z "$show_help"; then # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$progpath" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` @@ -868,34 +1892,19 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi - $echo "$srcfile" > "$lockfile" + $ECHO "$srcfile" > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi - qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` - case $qsrcfile in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qsrcfile="\"$qsrcfile\"" ;; - esac - - $run $rm "$libobj" "${libobj}T" + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T <<EOF -# $libobj - a libtool object file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# Name of the PIC object. -EOF + $opt_dry_run || $RM "$libobj" "${libobj}T" # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then @@ -909,32 +1918,21 @@ EOF command="$base_compile $qsrcfile" fi - if test ! -d "${xdir}$objdir"; then - $show "$mkdir ${xdir}$objdir" - $run $mkdir ${xdir}$objdir - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then - exit $exit_status - fi - fi + func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir command="$command -o $lobj" fi - $run $rm "$lobj" "$output_obj" + $opt_dry_run || $RM "$lobj" "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - test -n "$output_obj" && $run $rm $removelist - exit $EXIT_FAILURE - fi + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -948,45 +1946,27 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <<EOF -pic_object='$objdir/$objname' - -EOF - # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then - suppress_output=' >/dev/null 2>&1' + suppress_output=' >/dev/null 2>&1' fi - else - # No PIC object so indicate it doesn't exist in the libtool - # object file. - test -z "$run" && cat >> ${libobj}T <<EOF -pic_object=none - -EOF fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code - command="$base_compile $qsrcfile" + command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi @@ -996,17 +1976,13 @@ EOF # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" - $run $rm "$obj" "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - $run $rm $removelist - exit $EXIT_FAILURE - fi + $opt_dry_run || $RM "$obj" "$output_obj" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -1020,51 +1996,1501 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +test "$mode" = compile && func_mode_compile ${1+"$@"} + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" else - error=$? - $run $rm $removelist - exit $error + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi + done - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <<EOF -# Name of the non-PIC object. -non_pic_object='$objname' + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" -EOF + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" else - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <<EOF -# Name of the non-PIC object. -non_pic_object=none + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + $ECHO "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} -EOF +test "$mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done fi - $run $mv "${libobj}T" "${libobj}" + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $run $rm "$lockfile" + $ECHO "X----------------------------------------------------------------------" | $Xsed + $ECHO "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + $ECHO + $ECHO "If you ever happen to want to link against installed libraries" + $ECHO "in a given directory, LIBDIR, you must either use libtool, and" + $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" + $ECHO "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" + $ECHO " during execution" fi + if test -n "$runpath_var"; then + $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" + $ECHO " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $ECHO + + $ECHO "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" + $ECHO "pages." + ;; + *) + $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + $ECHO "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS - ;; +} + +test "$mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $ECHO "X$nonopt" | $GREP shtool >/dev/null; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + install_prog="$install_prog$func_quote_for_eval_result" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + install_prog="$install_prog $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$mode" = install && func_mode_install ${1+"$@"} + + +# func_emit_wrapper arg +# +# emit a libtool wrapper script on stdout +# don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variable +# set therein. +# +# arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the '.lib' directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=no + if test -n "$1" ; then + func_emit_wrapper_arg1=$1 + fi + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + ECHO=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$ECHO works! + : + else + # Restart under the correct shell, and then maybe \$ECHO will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $ECHO "\ + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} +# end: func_emit_wrapper + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat <<EOF + +/* $cwrappersource - temporary wrapper executable for $objdir/$outputname + Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION + + The $output program cannot be directly executed until all the libtool + libraries that it depends on are installed. + + This wrapper executable should never be moved out of the build directory. + If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "$SHELL $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. +*/ +EOF + cat <<"EOF" +#include <stdio.h> +#include <stdlib.h> +#ifdef _MSC_VER +# include <direct.h> +# include <process.h> +# include <io.h> +#else +# include <unistd.h> +# include <stdint.h> +#endif +#include <malloc.h> +#include <stdarg.h> +#include <assert.h> +#include <string.h> +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <sys/stat.h> + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +#ifdef _MSC_VER +# define S_IXUSR _S_IEXEC +# define stat _stat +# ifndef _INTPTR_T_DEFINED +# define intptr_t int +# endif +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifdef __CYGWIN__ +# define FOPEN_WB "wb" +#endif + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#undef LTWRAPPER_DEBUGPRINTF +#if defined DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} +#else +# define LTWRAPPER_DEBUGPRINTF(args) +#endif + +const char *program_name = NULL; + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_fatal (const char *message, ...); + +static const char *script_text = +EOF + + func_emit_wrapper yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + + cat <<EOF +const char * MAGIC_EXE = "$magic_exe"; + +int +main (int argc, char *argv[]) +{ + char **newargz; + char *tmp_pathspec; + char *actual_cwrapper_path; + char *shwrapper_name; + intptr_t rval = 127; + FILE *shwrapper; + + const char *dumpscript_opt = "--lt-dump-script"; + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); + LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); + LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); + + /* very simple arg parsing; don't want to rely on getopt */ + for (i = 1; i < argc; i++) + { + if (strcmp (argv[i], dumpscript_opt) == 0) + { +EOF + case "$host" in + *mingw* | *cygwin* ) + # make stdout use "unix" line endings + echo " _setmode(1,_O_BINARY);" + ;; + esac + + cat <<EOF + printf ("%s", script_text); + return 0; + } + } + + newargz = XMALLOC (char *, argc + 2); +EOF + + if test -n "$TARGETSHELL" ; then + # no path translation at all + lt_newargv0=$TARGETSHELL + else + case "$host" in + *mingw* ) + # awkward: cmd appends spaces to result + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + lt_newargv0=`( cmd //c echo $SHELL | $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo $SHELL` + case $lt_newargv0 in + *.exe | *.EXE) ;; + *) lt_newargv0=$lt_newargv0.exe ;; + esac + ;; + * ) lt_newargv0=$SHELL ;; + esac + fi + + cat <<EOF + newargz[0] = (char *) xstrdup ("$lt_newargv0"); +EOF + + cat <<"EOF" + tmp_pathspec = find_executable (argv[0]); + if (tmp_pathspec == NULL) + lt_fatal ("Couldn't find %s", argv[0]); + LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", + tmp_pathspec)); + + actual_cwrapper_path = chase_symlinks (tmp_pathspec); + LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", + actual_cwrapper_path)); + XFREE (tmp_pathspec); + + shwrapper_name = (char *) xstrdup (base_name (actual_cwrapper_path)); + strendzap (actual_cwrapper_path, shwrapper_name); + + /* shwrapper_name transforms */ + strendzap (shwrapper_name, ".exe"); + tmp_pathspec = XMALLOC (char, (strlen (shwrapper_name) + + strlen ("_ltshwrapperTMP") + 1)); + strcpy (tmp_pathspec, shwrapper_name); + strcat (tmp_pathspec, "_ltshwrapperTMP"); + XFREE (shwrapper_name); + shwrapper_name = tmp_pathspec; + tmp_pathspec = 0; + LTWRAPPER_DEBUGPRINTF (("(main) libtool shell wrapper name: %s\n", + shwrapper_name)); +EOF + + cat <<EOF + newargz[1] = + XMALLOC (char, (strlen (actual_cwrapper_path) + + strlen ("$objdir") + 1 + strlen (shwrapper_name) + 1)); + strcpy (newargz[1], actual_cwrapper_path); + strcat (newargz[1], "$objdir"); + strcat (newargz[1], "/"); + strcat (newargz[1], shwrapper_name); +EOF + + + case $host_os in + mingw*) + cat <<"EOF" + { + char* p; + while ((p = strchr (newargz[1], '\\')) != NULL) + { + *p = '/'; + } + } +EOF + ;; + esac + + cat <<"EOF" + XFREE (shwrapper_name); + XFREE (actual_cwrapper_path); + + /* always write in binary mode */ + if ((shwrapper = fopen (newargz[1], FOPEN_WB)) == 0) + { + lt_fatal ("Could not open %s for writing", newargz[1]); + } + fprintf (shwrapper, "%s", script_text); + fclose (shwrapper); + + make_executable (newargz[1]); + + for (i = 1; i < argc; i++) + newargz[i + 1] = xstrdup (argv[i]); + newargz[argc + 1] = NULL; + + for (i = 0; i < argc + 1; i++) + { + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, newargz[i])); + } + +EOF + + case $host_os in + mingw*) + cat <<EOF + /* execv doesn't actually work on mingw as expected on unix */ + rval = _spawnv (_P_WAIT, "$lt_newargv0", (const char * const *) newargz); + if (rval == -1) + { + /* failed to start process */ + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"$lt_newargv0\": errno = %d\n", errno)); + return 127; + } + return rval; +} +EOF + ;; + *) + cat <<EOF + execv ("$lt_newargv0", newargz); + return rval; /* =127, but avoids unused variable warning */ +} +EOF + ;; + esac + + cat <<"EOF" + +void * +xmalloc (size_t num) +{ + void *p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), + string) : NULL; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char) name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable (const char *path) +{ + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal ("Could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF +} +# end: func_emit_cwrapperexe_src - # libtool link mode - link | relink) - modename="$modename: link" +# func_mode_link arg... +func_mode_link () +{ + $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # It is impossible to link a dll without this setting, and @@ -1084,10 +3510,10 @@ EOF allow_undefined=yes ;; esac - libtool_args="$nonopt" + libtool_args=$nonopt base_compile="$nonopt $@" - compile_command="$nonopt" - finalize_command="$nonopt" + compile_command=$nonopt + finalize_command=$nonopt compile_rpath= finalize_rpath= @@ -1102,6 +3528,7 @@ EOF dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= + new_inherited_linker_flags= avoid_version=no dlfiles= @@ -1117,7 +3544,6 @@ EOF no_install=no objs= non_pic_objects= - notinst_path= # paths that contain not-installed libtool libraries precious_files_regex= prefer_static_libs=no preload=no @@ -1131,28 +3557,47 @@ EOF thread_safe=no vinfo= vinfo_number=no - + weak_libs= + single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in - -all-static | -static) - if test "X$arg" = "X-all-static"; then + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" fi prefer_static_libs=yes - else + ;; + -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built - fi + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac build_libtool_libs=no build_old_libs=yes break @@ -1167,20 +3612,16 @@ EOF while test "$#" -gt 0; do arg="$1" shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" ;; esac @@ -1188,8 +3629,8 @@ EOF dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in @@ -1227,10 +3668,8 @@ EOF ;; expsyms) export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit $EXIT_FAILURE - fi + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; @@ -1239,18 +3678,21 @@ EOF prev= continue ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac prev= continue ;; - release) - release="-$arg" + inst_prefix) + inst_prefix_dir="$arg" prev= continue ;; @@ -1258,39 +3700,30 @@ EOF if test -f "$arg"; then save_arg=$arg moreargs= - for fil in `cat $save_arg` + for fil in `cat "$save_arg"` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac + func_source "$arg" - if test -z "$pic_object" || \ + if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && \ + test "$pic_object" = none && test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. @@ -1315,7 +3748,7 @@ EOF fi # A PIC object. - libobjs="$libobjs $pic_object" + func_append libobjs " $pic_object" arg="$pic_object" fi @@ -1325,7 +3758,7 @@ EOF non_pic_object="$xdir$non_pic_object" # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" + func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi @@ -1333,46 +3766,48 @@ EOF # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" + func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - + if $opt_dry_run; then # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else - $echo "$modename: link input file \`$save_arg' does not exist" - exit $EXIT_FAILURE + func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then @@ -1389,39 +3824,37 @@ EOF prev= continue ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" + shrext) + shrext_cmds="$arg" prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" continue ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" + weak) + weak_libs="$weak_libs $arg" prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" continue ;; xcclinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $qarg" prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" + func_append compile_command " $qarg" + func_append finalize_command " $qarg" continue ;; - shrext) - shrext_cmds="$arg" + xcompiler) + compiler_flags="$compiler_flags $qarg" prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" continue ;; - darwin_framework|darwin_framework_skip) - test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" continue ;; *) @@ -1436,17 +3869,13 @@ EOF case $arg in -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi + # The effects of -all-static are defined in a previous loop. continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue + func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) @@ -1471,8 +3900,7 @@ EOF -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit $EXIT_FAILURE + func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms @@ -1482,15 +3910,8 @@ EOF continue ;; - -framework|-arch|-isysroot) - case " $CC " in - *" ${arg} ${1} "* | *" ${arg} ${1} "*) - prev=darwin_framework_skip ;; - *) compiler_flags="$compiler_flags $arg" - prev=darwin_framework ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + -framework) + prev=framework continue ;; @@ -1504,25 +3925,23 @@ EOF -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" ;; esac continue ;; -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + func_stripname '-L' '' "$arg" + dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - notinst_path="$notinst_path $dir" - fi + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac @@ -1535,7 +3954,7 @@ EOF esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` + testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; @@ -1566,7 +3985,7 @@ EOF ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" + deplibs="$deplibs System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) @@ -1590,57 +4009,35 @@ EOF continue ;; + -module) + module=yes + continue + ;; + # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. - -model) - compile_command="$compile_command $arg" + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot) compiler_flags="$compiler_flags $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" prev=xcompiler continue ;; - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - continue - ;; - - -module) - module=yes + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; + esac continue ;; - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m* pass through architecture-specific compiler args for GCC - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -pg pass through profiling flag for GCC - # @file GCC response files - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ - -t[45]*|-txscale*|@*) - - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - compiler_flags="$compiler_flags $arg" - continue - ;; - - -shrext) - prev=shrext + -multi_module) + single_module="${wl}-multi_module" continue ;; @@ -1651,11 +4048,11 @@ EOF -no-install) case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) # The PATH hackery in wrapper scripts is required on Windows - # in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; @@ -1696,13 +4093,13 @@ EOF ;; -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + func_stripname '-R' '' "$arg" + dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in @@ -1712,7 +4109,17 @@ EOF continue ;; - -static) + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects @@ -1730,47 +4137,49 @@ EOF prev=vinfo continue ;; + -version-number) prev=vinfo vinfo_number=yes continue ;; + -weak) + prev=weak + continue + ;; + -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" done IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$arg" + arg=$func_stripname_result ;; -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" done IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$arg" + arg=$func_stripname_result ;; -Xcompiler) @@ -1788,16 +4197,36 @@ EOF continue ;; + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + # Some other compiler flag. -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" ;; *.$objext) @@ -1809,32 +4238,23 @@ EOF # A libtool-controlled object. # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac + func_source "$arg" - if test -z "$pic_object" || \ + if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && \ + test "$pic_object" = none && test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. @@ -1859,7 +4279,7 @@ EOF fi # A PIC object. - libobjs="$libobjs $pic_object" + func_append libobjs " $pic_object" arg="$pic_object" fi @@ -1869,7 +4289,7 @@ EOF non_pic_object="$xdir$non_pic_object" # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" + func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi @@ -1877,28 +4297,22 @@ EOF # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" + func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - + if $opt_dry_run; then # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; @@ -1931,70 +4345,51 @@ EOF *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" fi done # argument parsing loop - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + func_basename "$output" + outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" # Create the object directory. - if test ! -d "$output_objdir"; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then - exit $exit_status - fi - fi + func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; @@ -2002,22 +4397,13 @@ EOF *) linkmode=prog ;; # Anything else should be a program. esac - case $host in - *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps - duplicate_compiler_generated_deps=yes - ;; - *) - duplicate_compiler_generated_deps=$duplicate_deps - ;; - esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then + if $opt_duplicate_deps ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac @@ -2032,7 +4418,7 @@ EOF # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= - if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; @@ -2048,15 +4434,16 @@ EOF newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in lib) - passes="conv link" + passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit $EXIT_FAILURE + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done @@ -2072,7 +4459,20 @@ EOF *) passes="conv" ;; esac + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" @@ -2085,31 +4485,65 @@ EOF link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + case $lib in + *.la) func_source "$lib" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` + case " $weak_libs " in + *" $deplib_base "*) ;; + *) deplibs="$deplibs $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi + for deplib in $libs; do lib= found=no case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else compiler_flags="$compiler_flags $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + func_warning "\`-l' is ignored for archives/objects" continue fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` - for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" @@ -2139,21 +4573,17 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) - if (${SED} -e '2q' $lib | - grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_p "$lib"; then library_names= old_library= - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac + func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." + func_dirname "$lib" "" "." + ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" @@ -2165,19 +4595,35 @@ EOF continue fi fi - ;; + ;; *) ;; esac fi fi ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; prog) if test "$pass" = conv; then @@ -2190,17 +4636,19 @@ EOF compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + func_stripname '-R' '' "$deplib" + dir=$func_stripname_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; @@ -2218,35 +4666,41 @@ EOF fi case $linkmode in lib) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - if eval $echo \"$deplib\" 2>/dev/null \ - | $SED 10q \ + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi + valid_a_lib=yes + fi ;; - pass_all) - valid_a_lib=yes + pass_all) + valid_a_lib=yes ;; - esac - if test "$valid_a_lib" != yes; then - $echo - $echo "*** Warning: Trying to link with static lib archive $deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because the file extensions .$libext of this argument makes me believe" - $echo "*** that it is just a static archive that I should not used here." - else - $echo - $echo "*** Warning: Linking the shared library $output against the" - $echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi + esac + if test "$valid_a_lib" != yes; then + $ECHO + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because the file extensions .$libext of this argument makes me believe" + $ECHO "*** that it is just a static archive that I should not use here." + else + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac continue ;; prog) @@ -2281,21 +4735,18 @@ EOF continue ;; esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : else - $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." + func_dirname "$lib" "" "." + ladir="$func_dirname_result" dlname= dlopen= @@ -2303,6 +4754,7 @@ EOF libdir= library_names= old_library= + inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes @@ -2311,11 +4763,19 @@ EOF # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then @@ -2328,26 +4788,24 @@ EOF deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done elif test "$linkmode" != prog && test "$linkmode" != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "\`$lib' is not a convenience library" fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done continue fi # $pass = conv @@ -2358,15 +4816,13 @@ EOF linklib="$l" done if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || @@ -2388,18 +4844,19 @@ EOF *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + func_basename "$lib" + laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 + func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" @@ -2421,18 +4878,22 @@ EOF notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" @@ -2468,7 +4929,9 @@ EOF tmp_libs= for deplib in $dependency_libs; do case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + -L*) func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then @@ -2478,7 +4941,7 @@ EOF # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if test "X$duplicate_deps" = "Xyes" ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac @@ -2490,14 +4953,15 @@ EOF if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $absdir" ;; + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) temp_rpath="$temp_rpath$absdir:" ;; esac fi @@ -2535,27 +4999,43 @@ EOF link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes ; then + if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi + case $host in + *cygwin* | *mingw*) + # No point in relinking DLLs because paths are not encoded + notinst_deplibs="$notinst_deplibs $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + ;; + esac # This is a shared library - # Warn about portability, can't link against -module's on - # some systems (darwin) - if test "$shouldnotlink" = yes && test "$pass" = link ; then - $echo + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + $ECHO if test "$linkmode" = prog; then - $echo "*** Warning: Linking the executable $output against the loadable module" + $ECHO "*** Warning: Linking the executable $output against the loadable module" else - $echo "*** Warning: Linking the shared library $output against the loadable module" + $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi - $echo "*** $linklib is not portable!" + $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then @@ -2585,9 +5065,10 @@ EOF if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" @@ -2606,36 +5087,22 @@ EOF # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - soname=`$echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$extract_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$old_archive_from_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir @@ -2657,17 +5124,21 @@ EOF *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) - # if the lib is a module then we can not link against - # it, someone is ignoring the new warnings I added + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | - $EGREP ": [^:]* bundle" >/dev/null ; then - $echo "** Warning, lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $echo - $echo "** And there doesn't seem to be a static archive available" - $echo "** The link will probably fail, sorry" - else - add="$dir/$old_library" + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $ECHO + $ECHO "*** And there doesn't seem to be a static archive available" + $ECHO "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" fi fi esac @@ -2685,7 +5156,8 @@ EOF fi ;; relink) - if test "$hardcode_direct" = yes; then + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" @@ -2709,8 +5181,7 @@ EOF esac if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit $EXIT_FAILURE + func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then @@ -2725,8 +5196,8 @@ EOF else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; @@ -2741,7 +5212,8 @@ EOF add_dir= add= # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" @@ -2755,9 +5227,9 @@ EOF elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" + add="$inst_prefix_dir$libdir/$linklib" else - add="$libdir/$linklib" + add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. @@ -2801,21 +5273,21 @@ EOF # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - $echo - $echo "*** Warning: This system can not link to static lib archive $lib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have." + $ECHO + $ECHO "*** Warning: This system can not link to static lib archive $lib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - $echo "*** But as you try to build a module library, libtool will still create " - $echo "*** a static module, that should work as long as the dlopening application" - $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + $ECHO "*** But as you try to build a module library, libtool will still create " + $ECHO "*** a static module, that should work as long as the dlopening application" + $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -2839,7 +5311,8 @@ EOF temp_deplibs= for libdir in $dependency_libs; do case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; @@ -2857,7 +5330,7 @@ EOF tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac @@ -2871,88 +5344,73 @@ EOF case $deplib in -L*) path="$deplib" ;; *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." + func_dirname "$deplib" "" "." + dir="$func_dirname_result" # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac - if grep "^installed=no" $deplib > /dev/null; then - path="$absdir/$objdir" - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - if test "$absdir" != "$libdir"; then - $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 - fi - path="$absdir" - fi - depdepl= + if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) - # we do not want to link against static libs, - # but need to link against shared + depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done - if test -f "$path/$depdepl" ; then - depdepl="$path/$depdepl" + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` + darwin_install_name=`$ECHO $darwin_install_name` + if test -z "$darwin_install_name"; then + darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` + darwin_install_name=`$ECHO $darwin_install_name` + fi + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" + path= fi - # do not add paths which are already there - case " $newlib_search_path " in - *" $path "*) ;; - *) newlib_search_path="$newlib_search_path $path";; - esac fi - path="" ;; *) - path="-L$path" + path="-L$absdir/$objdir" ;; esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi ;; - -l*) - case $host in - *-*-darwin*) - # Again, we only want to link against shared libraries - eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` - for tmp in $newlib_search_path ; do - if test -f "$tmp/lib$tmp_libs.dylib" ; then - eval depdepl="$tmp/lib$tmp_libs.dylib" - break - fi - done - path="" - ;; - *) continue ;; - esac - ;; - *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac - case " $deplibs " in - *" $depdepl "*) ;; - *) deplibs="$depdepl $deplibs" ;; - esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries @@ -3051,38 +5509,36 @@ EOF done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + func_warning "\`-dlopen' is ignored for archives" fi - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 - fi + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no @@ -3094,48 +5550,48 @@ EOF # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + func_stripname '' '.la' "$outputname" + name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit $EXIT_FAILURE + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else - $echo - $echo "*** Warning: Linking the shared library $output against the non-libtool" - $echo "*** objects $objs is not portable!" + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath - if test "$#" -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" oldlibs= if test -z "$rpath"; then @@ -3149,25 +5605,21 @@ EOF build_old_libs=yes fi - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 + shift IFS="$save_ifs" - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts @@ -3175,9 +5627,9 @@ EOF case $vinfo_number in yes) - number_major="$2" - number_minor="$3" - number_revision="$4" + number_major="$1" + number_minor="$2" + number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version @@ -3186,7 +5638,7 @@ EOF # which has an extra 1 added just for fun # case $version_type in - darwin|linux|osf|windows) + darwin|linux|osf|windows|none) current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_revision" @@ -3197,16 +5649,17 @@ EOF age="0" ;; irix|nonstopux) - current=`expr $number_major + $number_minor - 1` + current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_minor" + lt_irix_increment=no ;; esac ;; no) - current="$2" - revision="$3" - age="$4" + current="$1" + revision="$2" + age="$3" ;; esac @@ -3214,34 +5667,30 @@ EOF case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. @@ -3258,7 +5707,8 @@ EOF versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` - verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) @@ -3268,11 +5718,15 @@ EOF freebsd-elf) major=".$current" - versuffix=".$current"; + versuffix=".$current" ;; irix | nonstopux) - major=`expr $current - $age + 1` + if test "X$lt_irix_increment" = "Xno"; then + major=`expr $current - $age` + else + major=`expr $current - $age + 1` + fi case $version_type in nonstopux) verstring_prefix=nonstopux ;; @@ -3315,6 +5769,11 @@ EOF verstring="$verstring:${current}.0" ;; + qnx) + major=".$current" + versuffix=".$current" + ;; + sunos) major=".$current" versuffix=".$current.$revision" @@ -3328,9 +5787,7 @@ EOF ;; *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE + func_fatal_configuration "unknown library version type \`$version_type'" ;; esac @@ -3364,7 +5821,7 @@ EOF # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi @@ -3372,21 +5829,26 @@ EOF # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi + fi + func_generate_dlsyms "$libname" "$libname" "yes" + libobjs="$libobjs $symfileobj" + test "X$libobjs" = "X " && libobjs= + if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= - tempremovelist=`$echo "$output_objdir/*"` + tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then - if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then continue fi fi @@ -3395,10 +5857,8 @@ EOF *) ;; esac done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. @@ -3406,15 +5866,15 @@ EOF oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. - for path in $notinst_path; do - lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` - deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` - dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` - done + #for path in $notinst_path; do + # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` + # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` + # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` + #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. @@ -3459,7 +5919,7 @@ EOF ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" + deplibs="$deplibs System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. @@ -3473,7 +5933,7 @@ EOF *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; - *) + *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" @@ -3510,18 +5970,17 @@ EOF # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. - $rm conftest.c + $opt_dry_run || $RM conftest.c cat > conftest.c <<EOF int main() { return 0; } EOF - $rm conftest - $LTCC $LTCFLAGS -o conftest conftest.c $deplibs - if test "$?" -eq 0 ; then + $opt_dry_run || $RM conftest + if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then ldd_output=`ldd conftest` for i in $deplibs; do name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" -ne "0"; then + if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) @@ -3529,23 +5988,23 @@ EOF i="" ;; esac - fi + fi if test -n "$i" ; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then newdeplibs="$newdeplibs $i" else droppeddeps=yes - $echo - $echo "*** Warning: dynamic linker does not accept needed library $i." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which I believe you do not have" - $echo "*** because a test_compile did reveal that the linker did not use it for" - $echo "*** its dynamic dependency list that programs get resolved with at runtime." + $ECHO + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which I believe you do not have" + $ECHO "*** because a test_compile did reveal that the linker did not use it for" + $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." fi fi else @@ -3558,11 +6017,9 @@ EOF for i in $deplibs; do name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" != "0"; then - $rm conftest - $LTCC $LTCFLAGS -o conftest conftest.c $i - # Did it work? - if test "$?" -eq 0 ; then + if test "$name" != "" && test "$name" != "0"; then + $opt_dry_run || $RM conftest + if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in @@ -3573,30 +6030,30 @@ EOF esac fi if test -n "$i" ; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then newdeplibs="$newdeplibs $i" else droppeddeps=yes - $echo - $echo "*** Warning: dynamic linker does not accept needed library $i." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because a test_compile did reveal that the linker did not use this one" - $echo "*** as a dynamic dependency that programs can get resolved with at runtime." + $ECHO + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because a test_compile did reveal that the linker did not use this one" + $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." fi fi else droppeddeps=yes - $echo - $echo "*** Warning! Library $i is needed by this library but I was not able to" - $echo "*** make it link in! You will probably need to install it or some" - $echo "*** library that it depends on before this library will be fully" - $echo "*** functional. Installing it before continuing would be even better." + $ECHO + $ECHO "*** Warning! Library $i is needed by this library but I was not able to" + $ECHO "*** make it link in! You will probably need to install it or some" + $ECHO "*** library that it depends on before this library will be fully" + $ECHO "*** functional. Installing it before continuing would be even better." fi else newdeplibs="$newdeplibs $i" @@ -3605,12 +6062,12 @@ EOF fi ;; file_magic*) - set dummy $deplibs_check_method - file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + set dummy $deplibs_check_method; shift + file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" != "0"; then + if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) @@ -3620,13 +6077,13 @@ EOF esac fi if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` + libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an @@ -3639,12 +6096,12 @@ EOF potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$file_magic_regex" > /dev/null; then + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 @@ -3654,17 +6111,17 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for file magic test)" + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a file magic. Last file checked: $potlib" + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" fi fi else @@ -3674,8 +6131,8 @@ EOF done # Gone through all deplibs. ;; match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. @@ -3689,14 +6146,13 @@ EOF esac fi if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` + libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test - if eval $echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then + if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 @@ -3706,17 +6162,17 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a regex pattern. Last file checked: $potlib" + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi else @@ -3727,23 +6183,23 @@ EOF ;; none | unknown | *) newdeplibs="" - tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g'` + tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ + -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` done fi - if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ - | grep . >/dev/null; then - $echo + if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | + $GREP . >/dev/null; then + $ECHO if test "X$deplibs_check_method" = "Xnone"; then - $echo "*** Warning: inter-library dependencies are not supported in this platform." + $ECHO "*** Warning: inter-library dependencies are not supported in this platform." else - $echo "*** Warning: inter-library dependencies are not known to be supported." + $ECHO "*** Warning: inter-library dependencies are not known to be supported." fi - $echo "*** All declared inter-library dependencies are being dropped." + $ECHO "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; @@ -3756,24 +6212,24 @@ EOF case $host in *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then - $echo - $echo "*** Warning: libtool could not satisfy all declared inter-library" - $echo "*** dependencies of module $libname. Therefore, libtool will create" - $echo "*** a static module, that should work as long as the dlopening" - $echo "*** application is linked with the -dlopen flag." + $ECHO + $ECHO "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + $ECHO "*** a static module, that should work as long as the dlopening" + $ECHO "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -3783,16 +6239,16 @@ EOF build_libtool_libs=no fi else - $echo "*** The inter-library dependencies that have been dropped here will be" - $echo "*** automatically added whenever a program is linked with this library" - $echo "*** or is declared to -dlopen it." + $ECHO "*** The inter-library dependencies that have been dropped here will be" + $ECHO "*** automatically added whenever a program is linked with this library" + $ECHO "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then - $echo - $echo "*** Since this library must not contain undefined symbols," - $echo "*** because either the platform does not support them or" - $echo "*** it was explicitly requested with -no-undefined," - $echo "*** libtool will only create a static version of it." + $ECHO + $ECHO "*** Since this library must not contain undefined symbols," + $ECHO "*** because either the platform does not support them or" + $ECHO "*** it was explicitly requested with -no-undefined," + $ECHO "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -3806,7 +6262,14 @@ EOF # Done checking deplibs! deplibs=$newdeplibs fi - + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list @@ -3835,7 +6298,6 @@ EOF done deplibs="$new_libs" - # All the library-specific variables (install_libdir is set above). library_names= old_library= @@ -3906,8 +6368,9 @@ EOF eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names - realname="$2" - shift; shift + shift + realname="$1" + shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" @@ -3926,14 +6389,42 @@ EOF done # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + delfiles="$delfiles $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" + func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols + $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do @@ -3941,56 +6432,78 @@ EOF eval cmd=\"$cmd\" if len=`expr "X$cmd" : ".*"` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - $show "$cmd" - $run eval "$cmd" || exit $? - skipped_export=false + func_show_eval "$cmd" 'exit $?' + skipped_export=false else - # The command line is too long to execute in one step. - $show "using reloadable object file for export list..." - skipped_export=: + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $convenience libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= fi fi - + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" @@ -3998,7 +6511,7 @@ EOF # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. @@ -4011,12 +6524,12 @@ EOF cmds=$module_cmds fi else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds fi fi @@ -4025,8 +6538,9 @@ EOF test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we @@ -4040,77 +6554,153 @@ EOF save_libobjs=$libobjs fi save_output=$output - output_la=`$echo "X$output" | $Xsed -e "$basename"` + output_la=`$ECHO "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= - delfiles= last_robj= k=1 - output=$output_objdir/$output_la-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; }; then - objlist="$objlist $obj" + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + $ECHO 'INPUT (' > $output + for obj in $save_libobjs + do + $ECHO "$obj" >> $output + done + $ECHO ')' >> $output + delfiles="$delfiles $output" + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + $ECHO "$obj" >> $output + done + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + delfiles="$delfiles $output" + else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi - last_robj=$output_objdir/$output_la-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - len=1 fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - - if ${skipped_export-false}; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - libobjs=$output - # Append the command to create the export file. - eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" - fi - - # Set up a command to remove the reloadable object files - # after they are used. - i=0 - while test "$i" -lt "$k" - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" - done - $echo "creating a temporary reloadable object file: $output" + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi libobjs=$output # Restore the value of output. @@ -4118,6 +6708,7 @@ EOF if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. @@ -4130,28 +6721,45 @@ EOF cmds=$module_cmds fi else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds fi fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~\$rm $delfiles\" + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= fi + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) fi exit $lt_exit @@ -4161,12 +6769,11 @@ EOF # Restore the uninstalled library and exit if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then - $show "${rm}r $gentop" - $run ${rm}r "$gentop" + func_show_eval '${RM}r "$gentop"' fi fi @@ -4176,8 +6783,7 @@ EOF # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done @@ -4190,38 +6796,35 @@ EOF ;; obj) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + func_warning "\`-dlopen' is ignored for objects" fi - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" case $output in *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit $EXIT_FAILURE - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result ;; *) libobj= @@ -4230,7 +6833,7 @@ EOF esac # Delete the old objects. - $run $rm $obj $libobj + $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create @@ -4239,12 +6842,14 @@ EOF reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" @@ -4255,24 +6860,15 @@ EOF fi # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS @@ -4280,14 +6876,13 @@ EOF if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi @@ -4295,20 +6890,11 @@ EOF # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS @@ -4316,39 +6902,45 @@ EOF prog) case $host in - *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac case $host in - *darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - if test "$tagname" = CXX ; then - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - fi - ;; + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; esac @@ -4424,7 +7016,7 @@ EOF fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; @@ -4482,281 +7074,47 @@ EOF if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* ) - $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - else - $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - case $host in - *cygwin* | *mingw* ) - $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval '$echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | - if sort -k 3 </dev/null >/dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - $echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -" - - case $host in - *cygwin* | *mingw* ) - $echo >> "$output_objdir/$dlsyms" "\ -/* DATA imports from DLLs on WIN32 can't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs */ -struct { -" - ;; - * ) - $echo >> "$output_objdir/$dlsyms" "\ -const struct { -" - ;; - esac - - - $echo >> "$output_objdir/$dlsyms" "\ - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{\ -" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - case $host in - *cygwin* | *mingw* ) - if test -f "$output_objdir/${outputname}.def" ; then - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` - else - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - fi - ;; - * ) - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - ;; - esac - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit $EXIT_FAILURE - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' fi - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=yes + case $host in + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - exit_status=$? + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi @@ -4789,12 +7147,11 @@ static const void *lt_preloaded_setup() { # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. - $run $rm $output + $opt_dry_run || $RM $output # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? + func_show_eval "$link_command" 'exit $?' exit $EXIT_SUCCESS fi @@ -4803,13 +7160,13 @@ static const void *lt_preloaded_setup() { link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= @@ -4821,594 +7178,104 @@ static const void *lt_preloaded_setup() { fi # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - $show "$link_command" - $run eval "$link_command" || exit $? + func_show_eval "$link_command" 'exit $?' # Now create the wrapper script. - $show "creating $output" + func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then + # Quote $ECHO for shipping. + if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then case $progpath in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` fi - # Only actually do things if our run command is non-null. - if test -z "$run"; then + # Only actually do things if not in dry run mode. + $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in - *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe - outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) - output_name=`basename $output` - output_path=`dirname $output` - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $rm $cwrappersource $cwrapper - trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - cat > $cwrappersource <<EOF - -/* $cwrappersource - temporary wrapper executable for $objdir/$outputname - Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP - - The $output program cannot be directly executed until all the libtool - libraries that it depends on are installed. - - This wrapper executable should never be moved out of the build directory. - If it is, it will not operate correctly. - - Currently, it simply execs the wrapper *script* "/bin/sh $output", - but could eventually absorb all of the scripts functionality and - exec $objdir/$outputname directly. -*/ -EOF - cat >> $cwrappersource<<"EOF" -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <malloc.h> -#include <stdarg.h> -#include <assert.h> -#include <string.h> -#include <ctype.h> -#include <sys/stat.h> - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -/* -DDEBUG is fairly common in CFLAGS. */ -#undef DEBUG -#if defined DEBUGWRAPPER -# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) -#else -# define DEBUG(format, ...) -#endif - -const char *program_name = NULL; - -void * xmalloc (size_t num); -char * xstrdup (const char *string); -const char * base_name (const char *name); -char * find_executable(const char *wrapper); -int check_executable(const char *path); -char * strendzap(char *str, const char *pat); -void lt_fatal (const char *message, ...); - -int -main (int argc, char *argv[]) -{ - char **newargz; - int i; - - program_name = (char *) xstrdup (base_name (argv[0])); - DEBUG("(main) argv[0] : %s\n",argv[0]); - DEBUG("(main) program_name : %s\n",program_name); - newargz = XMALLOC(char *, argc+2); -EOF - - cat >> $cwrappersource <<EOF - newargz[0] = (char *) xstrdup("$SHELL"); -EOF - - cat >> $cwrappersource <<"EOF" - newargz[1] = find_executable(argv[0]); - if (newargz[1] == NULL) - lt_fatal("Couldn't find %s", argv[0]); - DEBUG("(main) found exe at : %s\n",newargz[1]); - /* we know the script has the same name, without the .exe */ - /* so make sure newargz[1] doesn't end in .exe */ - strendzap(newargz[1],".exe"); - for (i = 1; i < argc; i++) - newargz[i+1] = xstrdup(argv[i]); - newargz[argc+1] = NULL; - - for (i=0; i<argc+1; i++) - { - DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]); - ; - } - -EOF - - case $host_os in - mingw*) - cat >> $cwrappersource <<EOF - execv("$SHELL",(char const **)newargz); -EOF - ;; - *) - cat >> $cwrappersource <<EOF - execv("$SHELL",newargz); -EOF - ;; - esac - - cat >> $cwrappersource <<"EOF" - return 127; -} - -void * -xmalloc (size_t num) -{ - void * p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); - - return p; -} - -char * -xstrdup (const char *string) -{ - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL -; -} - -const char * -base_name (const char *name) -{ - const char *base; - -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha ((unsigned char)name[0]) && name[1] == ':') - name += 2; -#endif - - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return base; -} - -int -check_executable(const char * path) -{ - struct stat st; - - DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); - if ((!path) || (!*path)) - return 0; - - if ((stat (path, &st) >= 0) && - ( - /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ -#if defined (S_IXOTH) - ((st.st_mode & S_IXOTH) == S_IXOTH) || -#endif -#if defined (S_IXGRP) - ((st.st_mode & S_IXGRP) == S_IXGRP) || -#endif - ((st.st_mode & S_IXUSR) == S_IXUSR)) - ) - return 1; - else - return 0; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise */ -char * -find_executable (const char* wrapper) -{ - int has_slash = 0; - const char* p; - const char* p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char* concat_name; - - DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char* path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char* q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR(*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen(tmp); - concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen(tmp); - concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - return NULL; -} - -char * -strendzap(char *str, const char *pat) -{ - size_t len, patlen; - - assert(str != NULL); - assert(pat != NULL); - - len = strlen(str); - patlen = strlen(pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp(str, pat) == 0) - *str = '\0'; - } - return str; -} - -static void -lt_error_core (int exit_status, const char * mode, - const char * message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} -EOF - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource - ;; - esac - $rm $output - trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - $echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit $EXIT_FAILURE - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - $echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - *) - $echo >> $output "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" + func_emit_wrapper no > $output + chmod +x $output ;; esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit $EXIT_FAILURE - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - $echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit $EXIT_FAILURE - fi -fi\ -" - chmod +x $output - fi + } exit $EXIT_SUCCESS ;; esac @@ -5417,7 +7284,7 @@ fi\ for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" + oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else @@ -5426,6 +7293,9 @@ fi\ build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + oldobjs="$oldobjs $symfileobj" + fi fi addlibs="$old_convenience" fi @@ -5440,8 +7310,18 @@ fi\ # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds + cmds=$old_archive_from_new_cmds else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + oldobjs="$oldobjs $func_extract_archives_result" + fi + # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a @@ -5450,32 +7330,22 @@ fi\ # not supported by libtool). if (for obj in $oldobjs do - $echo "X$obj" | $Xsed -e 's%^.*/%%' + func_basename "$obj" + $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else - $echo "copying selected object files to avoid basename conflicts..." - - if test -z "$gentop"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$gentop"; then - exit $exit_status - fi - fi - + $ECHO "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do - objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + func_basename "$obj" + objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) @@ -5489,30 +7359,26 @@ fi\ *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done - $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - $run ln "$obj" "$gentop/$newobj" || - $run cp "$obj" "$gentop/$newobj" + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" oldobjs="$oldobjs $gentop/$newobj" ;; *) oldobjs="$oldobjs $obj" ;; esac done fi - eval cmds=\"$old_archive_cmds\" - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + if len=`expr "X$cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." + func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs - # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do @@ -5530,7 +7396,7 @@ fi\ # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB + RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" @@ -5546,49 +7412,39 @@ fi\ fi fi fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - eval cmd=\"$cmd\" - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_execute_cmds "$cmds" 'exit $?' done - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi + test -n "$generated" && \ + func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" + func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi - # Only create the output if not a dry run. - if test -z "$run"; then + $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then @@ -5600,12 +7456,11 @@ fi\ for deplib in $dependency_libs; do case $deplib in *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + func_basename "$deplib" + name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; @@ -5613,25 +7468,37 @@ fi\ done dependency_libs="$newdependency_libs" newdlfiles= + for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdlfiles="$newdlfiles $libdir/$name" + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlfiles="$newdlfiles $libdir/$name" + ;; + *) newdlfiles="$newdlfiles $lib" ;; + esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdlprefiles="$newdlprefiles $libdir/$name" + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlprefiles="$newdlprefiles $libdir/$name" + ;; + esac done dlprefiles="$newdlprefiles" else @@ -5654,15 +7521,15 @@ fi\ done dlprefiles="$newdlprefiles" fi - $rm $output + $RM $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac - $echo > $output "\ + $ECHO > $output "\ # $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. @@ -5676,9 +7543,15 @@ library_names='$library_names' # The name of the static archive. old_library='$old_library' +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + # Libraries that this one depends upon. dependency_libs='$dependency_libs' +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + # Version information for $libname. current=$current age=$age @@ -5697,746 +7570,29 @@ dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then - $echo >> $output "\ + $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done - fi + } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) prev=$arg ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test "$#" -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - if test "$inst_prefix_dir" = "$destdir"; then - $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 - exit $EXIT_FAILURE - fi - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` - fi - - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - exit $EXIT_FAILURE - fi - fi - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - cmds=$postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - file=`$echo $file|${SED} 's,.exe$,,'` - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= - - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac - - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit $EXIT_FAILURE - fi - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - relink_command= - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir=`func_mktempdir` - file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac - ;; - esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - if test -n "$stripme" && test -n "$old_striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? - fi - - # Do each command in the postinstall commands. - cmds=$old_postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - cmds=$finish_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = : && exit $EXIT_SUCCESS - - $echo "X----------------------------------------------------------------------" | $Xsed - $echo "Libraries have been installed in:" - for libdir in $libdirs; do - $echo " $libdir" - done - $echo - $echo "If you ever happen to want to link against installed libraries" - $echo "in a given directory, LIBDIR, you must either use libtool, and" - $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - $echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - $echo " during execution" - fi - if test -n "$runpath_var"; then - $echo " - add LIBDIR to the \`$runpath_var' environment variable" - $echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $echo - $echo "See any operating system documentation about shared libraries for" - $echo "more information, such as the ld(1) and ld.so(8) manual pages." - $echo "X----------------------------------------------------------------------" | $Xsed - exit $EXIT_SUCCESS - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit $EXIT_FAILURE - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit $EXIT_FAILURE - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done +} - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi +{ test "$mode" = link || test "$mode" = relink; } && + func_mode_link ${1+"$@"} - # Restore saved environment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit $EXIT_SUCCESS - fi - ;; - - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" files= rmforce= exit_status=0 @@ -6448,30 +7604,28 @@ relink_command=\"$relink_command\"" for arg do case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; *) files="$files $arg" ;; esac done - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" rmdirs= origobjdir="$objdir" for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then objdir="$origobjdir" else objdir="$dir/$origobjdir" fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + func_basename "$file" + name="$func_basename_result" test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates @@ -6483,9 +7637,9 @@ relink_command=\"$relink_command\"" fi # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then : elif test -d "$file"; then exit_status=1 @@ -6499,8 +7653,8 @@ relink_command=\"$relink_command\"" case $name in *.la) # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name + if func_lalib_p "$file"; then + func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do @@ -6515,39 +7669,17 @@ relink_command=\"$relink_command\"" *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - cmds=$postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - cmds=$old_postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; @@ -6557,20 +7689,20 @@ relink_command=\"$relink_command\"" *.lo) # Possibly a libtool object, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_p "$file"; then # Read the .lo file - . $dir/$name + func_source $dir/$name # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then + if test -n "$pic_object" && + test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi @@ -6581,17 +7713,26 @@ relink_command=\"$relink_command\"" noexename=$name case $file in *.exe) - file=`$echo $file|${SED} 's,.exe$,,'` - noexename=`$echo $name|${SED} 's,.exe$,,'` + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$noexename + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles @@ -6606,237 +7747,38 @@ relink_command=\"$relink_command\"" fi ;; esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 + func_show_eval "$RM $rmfiles" 'exit_status=1' done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 + func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status - ;; +} - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - ;; - esac +{ test "$mode" = uninstall || test "$mode" = clean; } && + func_mode_uninstall ${1+"$@"} - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - fi -fi # test -z "$show_help" +test -z "$mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then - eval exec $exec_cmd + eval exec "$exec_cmd" exit $EXIT_FAILURE fi -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE. - -Report bugs to <bug-libtool@gnu.org>." - exit $EXIT_SUCCESS - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path +exit $exit_status -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; -esac - -$echo -$echo "Try \`$modename --help' for more information about other modes." - -exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting @@ -6850,14 +7792,17 @@ exit $? # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared -disable_libs=shared +build_libtool_libs=no +build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static -disable_libs=static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: +# vi:sw=2 + |