diff options
Diffstat (limited to 'bin/runtest')
| -rwxr-xr-x | bin/runtest | 966 |
1 files changed, 0 insertions, 966 deletions
diff --git a/bin/runtest b/bin/runtest deleted file mode 100755 index 5e05abb..0000000 --- a/bin/runtest +++ /dev/null @@ -1,966 +0,0 @@ -#! /bin/sh -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://www.hdfgroup.org/licenses. -# If you do not have access to either file, you may request a copy from -# help@hdfgroup.org. -# - -# run the hdf5/bin/snapshot -# Usage: -# runtest run the test for the local host -# runtest <hostname> run the test for <hostname> -# runtest -all run the test for all predefined hosts -# -# Assumptions in knowing where to find the right scripts to execute. -# 1. assume we are at the top level of the hdf5 source. So, bin/* are -# where the script files are. -# 2. after the cvs update is completed, we can go to the snapshot area -# hdf5 source tree and use the bin/* there. -# 3. Cannot use the snapshot area scripts from the beginning because -# for one, the current directory is renamed as previous right after -# a snapshot release; and for another, some scripts may be changed -# by the cvs update while it is being used. - -# local setup -DEBUGMODE="" -test -n "$DEBUGMODE" && echo "******** DEBUGMODE is $DEBUGMODE ************" -WHEREAMI='pwd' -CMD= - -# the name of this program -PROGNAME="bin/runtest $DEBUGMODE" - -# Setup -HOSTNAME=`hostname | cut -f1 -d.` # no domain part -TODAY=`date +%m%d%a` -WEEKDAY=`date +%a` -H5VER= # default to current CVS version -H5VERSION= # default to current CVS version -n_test=0 # Number of tests ran -n_pass=0 # Number of tests passed -n_fail=0 # Number of tests failed -n_skip=0 # Number of tests skipped - -# Default to do checkout (only once) and test, no release. -# Will run test only if there is significant differences from previous version. -# If srcdir is not used, don't launched multiple tests -SNAPSHOT="${DEBUGMODE:+echo }bin/snapshot" -SRCDIR="srcdir" -# Default standard Snaptest commands -SNAPCMD="$SRCDIR test clean" -# Default Standard snaptest command options -STANDARD_OPT="" -ENABLE_PARALLEL="--enable-parallel" -CONFIGNAME=$HOSTNAME # Name used in the SNAPTESTCFG file - -# test host default as local host. -TESTHOST="" - -################################# -# Function definitions -################################# - -# Print messages to stdout -# Use this to show output heading to stdout -PRINT() -{ - echo "$*" -} - -# Show seconds since midnight. -# This is used to calculate seconds elapsed -SecOfDay() -{ - set `date '+%H %M %S'` - t_sec=`expr $1 \* 3600 + $2 \* 60 + $3` - echo $t_sec -} - -# Calculated the elapsed time (in seconds) between the first -# and second time. If second time is smaller than the first, -# we assume the clock has passed midnight and calculate appropriately. -ElapsedTime() -{ - if [ $2 -lt $1 ]; then - t_sec=`expr 3600 \* 24 - $1 + $2` - else - t_sec=`expr $2 - $1` - fi - echo `expr $t_sec / 60`m `expr $t_sec % 60`s -} - -# Report errors -# $1--an error message to be printed -REPORT_ERR() -{ - ERRMSG=$1 - # print it with a banner shifted right a bit - PRINT " *************************************" - PRINT " `date`" - PRINT " $ERRMSG" - PRINT " *************************************" - # report it in the FAILED-LOG file too - PRINT "$ERRMSG" >> $FAILEDLOG -} - -# -# Report results of the last test done -REPORT_RESULT() -{ - if [ $retcode -eq 0 ]; then - if [ $skiptest = yes ]; then - n_skip=`expr $n_skip + 1` - PRINT "SKIPPED ${HOSTNAME}: $TEST_TYPE" | tee -a $SKIPPEDLOG - else - n_pass=`expr $n_pass + 1` - PRINT "PASSED ${HOSTNAME}: $TEST_TYPE" | tee -a $PASSEDLOG - fi - else - # test failed. - n_fail=`expr $n_fail + 1` - REPORT_ERR "****FAILED ${HOSTNAME}: $TEST_TYPE****" - fi -} - -# Print a blank line -PRINT_BLANK() -{ - PRINT -} - -# Print test trailer -PRINT_TEST_TRAILER() -{ - PRINT "*** finished $TEST_TYPE tests for $HOSTNAME ***" - date; EndTime=`SecOfDay` - PRINT Total time = `ElapsedTime $StartTime $EndTime` - PRINT_BLANK -} - -# Print trailer summary -PRINT_TRAILER() -{ - PRINT "*** finished tests in $HOSTNAME ***" - date; TotalEndTime=`SecOfDay` - PRINT "${HOSTNAME}: Ran $n_test($n_pass/$n_fail/$n_skip) $runtest_type, Grand total test time = " \ - "`ElapsedTime $TotalStartTime $TotalEndTime`" | tee -a $TIMELOG - PRINT_BLANK -} - -# Figure out which remote command to use to reach a host. -# Try ssh first, then rsh since fewer machines support rsh exec. -# $1--hostname to reach. -CHECK_RSH() -{ - # Figure out how to use ping command in this host. - # Some hosts use "ping host count", some use "ping -c count host". - # Test "ping -c 3 -w 5" since it has timeout feature. - # Test "ping -c ..." style before "ping host 3" because some machines - # that recognize -c treat 'ping localhost 3' as to ping host '3'. - if [ -z "$PING" ]; then - if ping -c 3 -w 5 localhost >/dev/null 2>&1; then - PING='ping -c 3 -w 5' - PINGCOUNT= - elif ping -c 3 localhost >/dev/null 2>&1; then - PING='ping -c 3' - PINGCOUNT= - elif ping localhost 3 >/dev/null 2>&1; then - PING=ping - PINGCOUNT=3 - else # don't know how to use ping. - PING=no_ping - PINGCOUNT= - fi - fi - # - host=$1 - # Try remote command with host if it responds to ping. - # Still try it if we don't know how to do ping. - if [ no_ping = "$PING" ] || $PING $host $PINGCOUNT >/dev/null 2>&1; then - if ssh $host -n hostname >/dev/null 2>&1; then - RSH=ssh - elif rsh $host -n hostname >/dev/null 2>&1; then - RSH=rsh - else - PRINT cannot remote command with $host - RSH="NoRemoteCommand" - fi - else - RSH="NotReachable" - fi -} - - -# Wait for a file for at most number of minutes -# $1--the file -# $2--number of minutes -# WAIT_STATUS set to: -# -1 if errors encountered -# 0 if file found within time limit -# 1 if file not found within time limit -WAITFOR() -{ - wait_file=$1 - nminutes=$2 - if [ -z "$wait_file" -o ! "$nminutes" -ge 0 ] - then - PRINT "errors in argument of WAITFOR(): wait_file($1) or nminutes($2)" - WAIT_STATUS=-1 - return - fi - while [ ! -f $wait_file ]; do - if [ $nminutes -gt 0 ]; then - PRINT "Wait For $wait_file to appear" - sleep 60 #sleep 1 minute - else - WAIT_STATUS=1 - return - fi - nminutes=`expr $nminutes - 1` - done - WAIT_STATUS=0 - return -} - - -# Wait till a file disappears for at most number of minutes. -# Useful to wait till a lock is removed by another process. -# $1--the file -# $2--number of minutes -# WAIT_STATUS set to: -# -1 if errors encountered -# 0 if file disappears within time limit -# 1 if file has not disappeared within time limit -WAITTILL() -{ - wait_file=$1 - nminutes=$2 - if [ -z "$wait_file" -o ! "$nminutes" -ge 0 ] - then - PRINT "errors in argument of WAITTILL(): wait_file($1) or nminutes($2)" - WAIT_STATUS=-1 - return - fi - while [ -f $wait_file ]; do - if [ $nminutes -gt 0 ]; then - PRINT "Wait till $wait_file has disappeared" - sleep 60 #sleep 1 minute - else - WAIT_STATUS=1 - return - fi - nminutes=`expr $nminutes - 1` - done - WAIT_STATUS=0 - return -} - - -# Run one snapshot test -# $*--Types of test being run -RUNSNAPTEST() -{ - SNAPCMD_OPT="$STANDARD_OPT" # snapshot test option - SRCDIRNAME=${HOSTNAME} - # restore CC, PATH in case they were changed in the last test. - CC="$CC_SAVED" - PATH=$PATH_SAVED - export PATH # DEC OSF1 needs to export PATH explicitly - TEST_TYPE=$* - retcode=0 - skiptest=no - date - PRINT "*** starting $TEST_TYPE tests in $HOSTNAME ***" - PRINT "Uname -a: `uname -a`" - - # Parse the test type and set options accordingly. - # See comments of SNAPTEST_CONFIG_PARSE(). - while [ $# -gt 0 ]; do - case $1 in - -n32) # want -n32 option - SRCDIRNAME=${SRCDIRNAME}-n32 - CC="cc -n32" - export CC - ;; - -64) # want -64 option - SRCDIRNAME=${SRCDIRNAME}-64 - CC="cc -64" - export CC - ;; - parallel) # want parallel test - SNAPCMD_OPT="$SNAPCMD_OPT $ENABLE_PARALLEL" - SRCDIRNAME=${SRCDIRNAME}-pp - ;; - standard) # standard test - ;; - --*) - # option for configure - SNAPCMD_OPT="$SNAPCMD_OPT $1" - ;; - op-configure) - # option for configure - SNAPCMD_OPT="$SNAPCMD_OPT $1 $2" - shift - ;; - op-snapshot) - # option for snapshot - shift - SNAPCMD_OPT="$SNAPCMD_OPT $1" - ;; - setenv) - # pass them along to snapshot set environment variable - shift - SNAPCMD_OPT="$SNAPCMD_OPT setenv $1 $2" - shift - ;; - setenvN) - # set environment variable with $1 values - # e.g., setenvN 3 x a b c is same as setenv x="a b c". - # pass them along to snapshot set environment variable - shift - envN=$1 - shift - envname=$1 - SNAPCMD_OPT="$SNAPCMD_OPT setenvN $envN $envname" - envalue= - while test $envN -gt 0; do - shift - envalue="$envalue $1" - envN=`expr $envN - 1` - done - SNAPCMD_OPT="$SNAPCMD_OPT $envalue" - ;; - skip) - # skip this test - skiptest=yes - ;; - srcdirname) - # Use this before using parallel and -n32 since this overrides - # the others. - shift - SRCDIRNAME=$1 - ;; - deploy) - # deploy the built binary. - shift - SNAPCMD_OPT="$SNAPCMD_OPT deploy $1" - ;; - deploydir) - # default directory for deployment. - shift - SNAPCMD_OPT="$SNAPCMD_OPT deploydir $1" - ;; - *) # unknown test - PRINT "$0: unknown type of test ($1)" - retcode=1 - ;; - esac - shift - done - - if [ $retcode -ne 0 -o $skiptest = yes ]; then - errcode=$retcode - return $retcode - fi - - # Track down the zlib software - ans=`$SNAPYARD/current/bin/locate_sw zlib` - if [ $? = 0 ]; then - Z_INC=`echo $ans | cut -f1 -d,` - Z_LIB=`echo $ans | cut -f2 -d,` - SNAPCMD_OPT="$SNAPCMD_OPT zlib $Z_INC,$Z_LIB" - else - # cannot locate zlib software. - # continue the test, maybe configure can find it. - : - fi - - if [ -n "${SRCDIRNAME}" ]; then - SNAPCMD_OPT="$SNAPCMD_OPT srcdirname ${SRCDIRNAME}" - fi - - # Setup log file name to save test output - THIS_MINUTE=`date +%H%M` - LOGFILE=${LOGBASENAME}/${SRCDIRNAME}_${TODAY}_${THIS_MINUTE} - PRINT "Running snapshot with output saved in" - PRINT " $LOGFILE" - (date; PRINT Hostname=$HOSTNAME) >> $LOGFILE - - ( - cd $SNAPYARD/current - $SNAPSHOT $SNAPCMD $SNAPCMD_OPT - ) >> $LOGFILE 2>&1 - retcode=$? - [ $retcode -ne 0 ] && errcode=$retcode - - date >> $LOGFILE - if [ $retcode -ne 0 ]; then - # Dump the first 10 lines and the last 30 lines of the LOGFILE. - ( ntail=30 - echo ========================= - echo "Dumping logfile of ${HOSTNAME}: $TEST_TYPE" - echo "Last $ntail lines of $LOGFILE" - echo ========================= - tail -$ntail $LOGFILE - echo ========================= - echo Dumping done - echo ========================= - echo "" - ) >> $FAILEDDETAIL - fi -} - -TIMELIMIT_PARSE() -{ - # Function returns timeparam for timekeeper via standard out - - # any debug statements should be 'echo "Debug string" >&2' or timekeeper - # will declare timeparam to be non-numeric and ignore it. - while read x y ; do - # Scan for entry for this weekday. - xd=`echo $x | cut -f1 -d/` - if [ "$xd" = ${WEEKDAY} ]; then - # strip away the weekday/ part. - timeparam=`echo $x | cut -f2 -d/` - break - fi - case "$x" in - '' | '#'*) - # blank or comment lines. Continue. - ;; - ???/*) - # Ignore any entry not of this weekday. - ;; - *) - timeparam="$x" - ;; - esac - done - echo $timeparam - return -} - -# configuration parsing. -# Taking configuration from input. -# This should be invoke with configure file as stdin. -# Syntax of the configure file: -# All lines started with the # are comment lines and are ignored. -# Blank lines are ignored too. -# Each config line starts with a "Scope" followed by test types. -# -# Scope can be: -# standard ... # what the standard test types are. -# <host>: <test> Do <test> for <host> -# all: <test> Do <test> for all hosts. -# <weekday>/... Use this scope if the <weekday> matches. -# <weekday> can be {Mon,Tue,Wed,Thu,Fri,Sat,Sun} -# If no <host>: input for a <host>, the standard test is used. -# -# Test types: -# standard tests defined in standard scope. -# -n32 -n32 mode. Apply to 64/32 bit OS such as IRIX64. -# parallel parallel mode. -# op-configure <option> configure option -# op-snapshot <option> snapshot option -# --* configure option -# setenv <name> <value> set environment variable <name> to <value> -# Pass along to snapshot -# setenvN <N> <name> <value> ... -# set environment variable with <N> values -# e.g., setenvN 3 x a b c is same as setenv x="a b c". -# Pass along to snapshot. -# skip skip this test -# srcdirname <name> use <name> as the build-directory. -# deploy <name> deploy the built binary at directory <name>. -# deploydir <name> use <name> as the default directory for deployment. -SNAPTEST_CONFIG_PARSE() -{ - while read x y ; do - # Scan for entry for this weekday. - xd=`echo $x | cut -f1 -d/` - if [ "$xd" = ${WEEKDAY} ]; then - # strip away the weekday/ part. - x=`echo $x | cut -f2 -d/` - fi - case "$x" in - '' | '#'*) - # blank or comment lines. Continue. - ;; - ???/*) - # Ignore any entry not of this weekday. - ;; - standard) - #standard configuration - STANDARD_OPT="$y" - ;; - all: | ${CONFIGNAME}:) - # types of test for all hosts or this host - if [ -n "$TEST_TYPES" ]; then - TEST_TYPES="$TEST_TYPES ; $y" - else - TEST_TYPES="$y" - fi - ;; - *:) # ignore types of test for other hosts - ;; - *) # unknown configuration option - PRINT $x $y - PRINT "***Unknown configuration option. Ignored.***" - ;; - esac - done -} - -# Snap Test configuration parsing. -# If TEST_TYPES is not set, set it to do the "standard" test. -SNAPTEST_CONFIG() -{ - TEST_TYPES= - STANDARD_OPT= - if [ -f $SNAPTESTCFG ]; then - SNAPTEST_CONFIG_PARSE < $SNAPTESTCFG - fi - TEST_TYPES=${TEST_TYPES:-'standard'} -} - - -# Show usage page -USAGE() -{ -cat <<EOF -Usage: runtest [-h] [-debug] [-r<version>] [-all] [-nocvs] [-nodiff] [<host> ...] - -h - print this help page - -debug - turn on debug mode - -r<version> - do runtest for <version> - -all - launch tests for all pre-defined testing hosts - -nocvs - do not do cvs commands - -nodiff - do not do diff commands - -setup - setup the directory structure for snapshot test - -configname <name> - use <name> as hostname in the parsing of the snaptest configure file - <host> - launch tests for <host> - --all and <host> are contradictory and whichever is specified last, is -the one to take effect. If neither are given, do the test for the -local host. -EOF -} - - -# Verify if directory ($1) exists. If not, create it. -CHECK_DIR() -{ - dir=$1 - if test ! -e $1; then - echo mkdir $1 - mkdir $1 - errcode=$? - elif test ! -d $1; then - echo $1 is not a directory - errcode=1 - fi -} - - -################################# -# Main -################################# -################################# -# Set up global variables -################################# -retcode=0 # error code of individula task -errcode=0 # error code of the whole test -skiptest=no # if test is skipped -CC_SAVED="$CC" # CC & PATH maybe changed within a test. -PATH_SAVED=$PATH # These save the original values. -timelimit=300 # default time limit (minutes) for the timekeeper - -################################# -# Parse options -################################# -while [ $# -gt 0 ]; do - case "$1" in - -h) # help--show usage - USAGE - exit 0 - ;; - -debug*) - # set debug mode - DEBUGMODE="$1" - SNAPSHOT="echo bin/snapshot" - PROGNAME="$PROGNAME $DEBUGMODE" - PRINT "******** DEBUGMODE is $DEBUGMODE ************" - ;; - -r*) - # version string - H5VER="$1" - ;; - -all) - # Test all hosts. - TESTHOST=-all - ;; - -nocvs) - # do not do cvs commands. - NOCVS=nocvs - ;; - -nodiff) - # do not do diff commands. - NODIFF=nodiff - ;; - -configname) - # use <name> as hostname in the parsing of the snaptest configure file. - shift - CONFIGNAME=$1 - ;; - -setup) - # setup the directory structure for snapshot test. - CMD=setup - ;; - -*) # Unknown option - PRINT "Unknown option ($1)" - USAGE - exit 1 - ;; - *) - TESTHOST=$* - break - ;; - esac - shift -done - -# setup H5VER if not set yet -if [ -z "$H5VER" -a -f bin/snapshot_version ] -then - . bin/snapshot_version -fi - -if [ -n "$H5VER" ] -then - H5VERSION=hdf5_`echo $H5VER | sed -e s/-r// -e s/\\\./_/g` - PROGNAME="$PROGNAME $H5VER" -else - H5VERSION=hdf5 -fi - -################################# -# Setup snapshot test directories -################################# -BASEDIR=${HOME}/snapshots-${H5VERSION} -# initial processing of setup option if requested -if test x-$CMD = x-setup; then - CHECK_DIR $BASEDIR - test $errcode -ne 0 && exit 1 -elif [ ! -d ${BASEDIR} ]; then - echo "BASEDIR ($BASEDIR) does not exist" - exit 1 -fi -# Show the real physical path rather than the symbolic path -SNAPYARD=`cd $BASEDIR && /bin/pwd` -# Log file basename -LOGDIR=${SNAPYARD}/log -LOGBASENAME=${LOGDIR} -PASSEDLOG=${LOGDIR}/PASSED_LOG_${TODAY} -FAILEDLOG=${LOGDIR}/FAILED_LOG_${TODAY} -FAILEDDETAIL=${LOGDIR}/FAILED_DETAIL_${TODAY} -SKIPPEDLOG=${LOGDIR}/SKIPPED_LOG_${TODAY} -TIMELOG=${LOGDIR}/TIME_LOG_${TODAY} -TIMEKEEPERLOG=${LOGDIR}/TIMEKEEPER_LOG_${TODAY} -CVSLOG=${LOGDIR}/CVS_LOG_${TODAY} -CVSLOG_LOCK=${LOGDIR}/CVS_LOG_LOCK_${TODAY} -DIFFLOG=${LOGDIR}/DIFF_LOG_${TODAY} -COPYRIGHT_ERR=${LOGDIR}/COPYRIGHT_ERR_${TODAY} -# Snap Test hosts and Configuration files -ALLHOSTSFILE=${SNAPYARD}/allhostfile -SNAPTESTCFG=${SNAPYARD}/snaptest.cfg -TIMELIMIT=${SNAPYARD}/timelimit -TMPFILE="${LOGDIR}/#runtest.${TODAY}.$$" - -# more processing of setup option if requested -if test x-$CMD = x-setup; then - CHECK_DIR $LOGDIR - test $errcode -ne 0 && exit 1 - CHECK_DIR $LOGDIR/OLD - test $errcode -ne 0 && exit 1 - CHECK_DIR $SNAPYARD/TestDir - test $errcode -ne 0 && exit 1 - # create empty test hosts or configure files if non-existing - for f in $ALLHOSTSFILE $SNAPTESTCFG; do - if test ! -f $f; then - echo Creating $f - touch $f - fi - done - # create or update the current source. - echo update current source - $SNAPSHOT checkout - # setup completed. Exit. - exit 0 -fi - -################################# -# Show some host status numbers -################################# -# df sometimes hangs due to file system problems. Invoke it as background -# process and give it 10 seconds to finish. If it hangs, just continue. -uptime -df & -sleep 10 - -################################# -# Setup test host(s) -################################# -if [ "$TESTHOST" = -all ]; then - if [ -f $ALLHOSTSFILE ]; then - TESTHOST=`sed -e '/^#/d;/^ *$/d' $ALLHOSTSFILE` - else - PRINT "could not access the all-hosts-file ($ALLHOSTSFILE)" - USAGE - exit 1 - fi -fi - - -################################# -# Setup to print a trailer summary when exiting not via -# the normal end of the script. -################################# -trap PRINT_TRAILER 0 - -# -TotalStartTime=`SecOfDay` - -# Process the configuration -SNAPTEST_CONFIG -PRINT STANDARD_OPT=$STANDARD_OPT -PRINT TEST_TYPES=$TEST_TYPES -PRINT_BLANK - -# Do a checkout if one has not been done today. -# Then check MANIFEST file and copyrights noitces. -if [ -z "$NOCVS" ]; then - PRINT "Running CVS checkout with output saved in" - PRINT " $CVSLOG" - # Set CVS lock first - touch $CVSLOG_LOCK - ($SNAPSHOT checkout ) >> $CVSLOG 2>&1 - # Save error code and remove the lock - errcode=$? - rm -f $CVSLOG_LOCK - if [ $errcode -ne 0 ]; then - # test failed. - REPORT_ERR "****FAILED ${HOSTNAME}: CVS checkout****" - exit $errcode - fi - # =================== - # Check MANIFEST file - # =================== - PRINT Checking MAINFEST file ... - (cd $SNAPYARD/current; bin/chkmanifest) > $TMPFILE 2>&1 - errcode=$? - if [ $errcode -eq 0 ]; then - # test passed. - cat $TMPFILE - else - # test failed. - REPORT_ERR "****FAILED ${HOSTNAME}: MANIFEST check****" - ( echo ========================= - echo "MANIFEST checking failed output" - echo ========================= - cat $TMPFILE - echo ========================= - echo "MANIFEST checking failed output done" - echo ========================= - echo "" - ) >> $FAILEDDETAIL - fi - rm $TMPFILE - PRINT_BLANK - # No copyright checking until what need copyright is decided. 2006/4/7. - if false; then - # ====================== - # Check Copyright notice - # ====================== - PRINT Checking Copyrights notices ... - if (cd $SNAPYARD/current; bin/chkcopyright) > $TMPFILE 2>&1 ; then - echo Passed. - else - # Save the output and report some of it. - # Do not report it as failed for runtest yet. - # Send a separate report mail via hardcoding. - # Need fixes/cleanup later. - echo "Failed. See detail in another report mail" - cp $TMPFILE $COPYRIGHT_ERR - nheadlines=300 - ntaillines=5 # Number of lines in report summary. - ( - echo ========================= - echo "Copyright checking failed. Showing first $nheadlines lines of output." - echo "Complete output is in file $COPYRIGHT_ERR" - echo ========================= - nreportlines=`wc -l < $COPYRIGHT_ERR` - if [ $nreportlines -le `expr $nheadlines + $ntaillines` ]; then - # Just print the whole file. - cat $COPYRIGHT_ERR - else - # Show the first $nheadlines plus report summary - head -$nheadlines $COPYRIGHT_ERR - echo ... - tail -$ntaillines $COPYRIGHT_ERR - fi - ) | Mail -s "${H5VERSION} Copyrights check Failed" hdf5lib - fi - rm $TMPFILE - PRINT_BLANK - fi -else - # make sure the cvs update, if done by another host, has completed. - # First wait for the presence of $CVSLOG which signals some host - # has started the cvs update. Then wait for the absence of $CVSLOG_LOCK - # which signals the host has completed the cvs update. - WAITFOR $CVSLOG 90 - if [ $WAIT_STATUS -ne 0 ]; then - errcode=$WAIT_STATUS - REPORT_ERR "****FAILED ${HOSTNAME}: Time expired waiting CVS update to start****" - exit $errcode - fi - WAITTILL $CVSLOG_LOCK 10 - if [ $WAIT_STATUS -ne 0 ]; then - errcode=$WAIT_STATUS - REPORT_ERR "****FAILED ${HOSTNAME}: Time expired waiting CVS update to finish****" - exit $errcode - fi -fi - -# run a snapshot diff to see if any significant differences between -# the current and previous versions -if [ -z "$NODIFF" ]; then - $SNAPSHOT diff >> $DIFFLOG 2>&1 - errcode=$? - # check the errcode only if NOT in DEBUG MODE - if [ -z "$DEBUGMODE" -a $errcode -eq 0 ]; then - # no need to run test - PRINT "NO TEST: no significant differences between current and previous versions" | - tee -a $PASSEDLOG - exit 0 - fi -fi - -# we can use the version of script in SNAPYARD/current now. -# Don't do the diff or cvs update any more. -PROGNAME="$SNAPYARD/current/$PROGNAME -nodiff -nocvs" - -# Decide to do test for the local host or for remote hosts -if [ -n "$TESTHOST" -a $HOSTNAME != "$TESTHOST" ]; then - date - PRINT "*** launching tests from $HOSTNAME ***" - PRINT_BLANK - TEST_TYPE="launching" - cd ${SNAPYARD}/log - # Fork off timekeeper if concurrent tests will be used. - if [ -n "$SRCDIR" ]; then - timelimit=`TIMELIMIT_PARSE < $TIMELIMIT` - ($SNAPYARD/current/bin/timekeeper $timelimit > $TIMEKEEPERLOG 2>&1 &) - PRINT " Fork off timekeeper $timelimit" - fi - runtest_type="hosts" - for h in $TESTHOST; do - # Must do CONFIGNAME before $h got changed by the second cut. - # cut returns the whole string if there is no / in the string - # at all. But that works okay for the CONFIGNAME too. - CONFIGNAME=`echo $h | cut -f2 -d/` - h=`echo $h | cut -f1 -d/` - n_test=`expr $n_test + 1` - TMP_OUTPUT="#${h}_${CONFIGNAME}.out" - (PRINT "==============" - PRINT "Testing $h" - PRINT "==============") > $TMP_OUTPUT - CHECK_RSH $h - # run the remote shell command with output to $TMP_OUTPUT - case "$RSH" in - rsh|ssh) - CMD="$RSH $h -n $PROGNAME -configname $CONFIGNAME" - PRINT $CMD - - # launch concurrent tests only if srcdir is used - if [ -n "$SRCDIR" ]; then - $CMD || REPORT_ERR "****FAILED ${h}: Abnormal exit from runtest****" && PRINT_BLANK & - echo $! > PID.${h}_${CONFIGNAME} - else - $CMD || REPORT_ERR "****FAILED ${h}: Abnormal exit from runtest****" && PRINT_BLANK - fi - ;; - NoRemoteCommand) - PRINT $h does not accept Remote Command "(`date`)" - ;; - NotReachable) - PRINT $h is not reachable "(`date`)" - ;; - *) - PRINT "CHECK_RSH for $h returned unknown result ($RSH)" - ;; - esac >> $TMP_OUTPUT 2>&1 - done - # wait for all launched tests to finish, then cat them back out. - wait - # Pause a moment in case the timekeeper is terminating processes. - wait 30 - for h in $TESTHOST; do - CONFIGNAME=`echo $h | cut -f2 -d/` - h=`echo $h | cut -f1 -d/` - TMP_OUTPUT="#${h}_${CONFIGNAME}.out" - cat $TMP_OUTPUT - # Verify test script did complete by checking the last lines - (tail -5 $TMP_OUTPUT | grep -s 'Grand total' > /dev/null 2>&1) || - (REPORT_ERR "****FAILED ${h}: snaptest did not complete****" && - PRINT_BLANK) - rm -f $TMP_OUTPUT PID.${h}_${CONFIGNAME} - done - exit 0 -fi - -# run the test(s) -# Note that first field is cut without -s but all subsequent cut -# must use -s. If -s is not used at all, a $TEST_TYPES that has -# no ';' (only 1 test), will pass through intact in all cut. That -# results in infinite looping. -# If -s is used with the first field, it will suppress completely -# a $TYPE_TYPES that has no ';' (only 1 tst ). That results in no -# test at all. -# Note that n_test must start as 1. -# -n_test=1 -runtest_type="tests" -TEST="`echo $TEST_TYPES | cut -f$n_test -d';'`" -while [ -n "$TEST" ]; do - StartTime=`SecOfDay` - RUNSNAPTEST $TEST - REPORT_RESULT - PRINT_TEST_TRAILER - - n_test=`expr $n_test + 1` - TEST="`echo $TEST_TYPES | cut -f$n_test -s -d';'`" -done -# dec n_test to show the actual number of tests ran. -n_test=`expr $n_test - 1` - -PRINT_TRAILER - -# disable trailer summary printing since all trailers have been -# printed and we are exiting normally. -trap 0 -exit $errcode |