summaryrefslogtreecommitdiffstats
path: root/bin
diff options
context:
space:
mode:
Diffstat (limited to 'bin')
-rwxr-xr-xbin/buildhdf5146
1 files changed, 36 insertions, 110 deletions
diff --git a/bin/buildhdf5 b/bin/buildhdf5
index 5e44a10..049da28 100755
--- a/bin/buildhdf5
+++ b/bin/buildhdf5
@@ -27,9 +27,9 @@ can continue from a previous build.
Command Syntax
==============
-buildhdf5 [-config] [-gass] [-srcdir dir] config-arguments ...
+buildhdf5 [-config] [-srcdir dir] config-arguments ...
-config: run configure only. [default to do build too]
- -gass: configure for the GASS driver
+ -szlib: configure in the szlib option
-help: show this help page
-n: no execution, just show commands
-srcdir: use dir as the source directory
@@ -47,10 +47,10 @@ does the build in place. If it finds ../hdf5/configure, it
does the --srcdir (that is separated source) build. Therefore,
if you have the following structure setup, you can run multiple
hosts building simultantously using a common source code.
- hdf5_1.4/hdf5 # holds the source
- .../arabica # for SunOS 2.7
- .../arabicapp # for SunOS 2.7 parallel
- .../burrwhite # for Linux 2.4
+ hdf5_v1.7/hdf5 # holds the source
+ .../sunbox # for SunOS
+ .../linux # for Linux
+ .../linuxpp # for Linux parallel
EOF
}
@@ -88,135 +88,57 @@ STEP()
}
-# Try locate the HDF4 library
-# This is a hack because there is no consistent place to find
-# the valid HDF library.
-LOCATE_HDF4()
+# Try locate the SZLIB.
+# This is a hack because there is no consistent szlib pathname.
+LOCATE_SZLIB()
{
OS=`uname -s`
echo OS=$OS
case "$OS" in
HP-UX)
- h4paths="/afs/ncsa/packages/hdf/HPUX_10.20"
+ szlibpaths="/afs/ncsa/projects/hdf/packages/szip_new/HPUX-11.00"
;;
IRIX)
- h4paths="/afs/ncsa/packages/hdf/4.1r3_irix"
+ szlibpaths="/afs/ncsa/projects/hdf/packages/szip_new/IRIX64-6.5-32bit"
;;
IRIX64)
case "$CC" in
*-n32)
- h4paths="/afs/ncsa/packages/hdf/IRIX64-n32_6.5"
+ szlibpaths="/afs/ncsa/projects/hdf/packages/szip_new/IRIX64-6.5-32bit"
;;
*)
- h4paths="/afs/ncsa/packages/hdf/IRIX64_6.5"
+ szlibpaths="/afs/ncsa/projects/hdf/packages/szip_new/IRIX64-6.5"
;;
esac
;;
Linux)
- h4paths="/afs/ncsa/packages/hdf/linux"
- ;;
- OSF1)
- h4paths="/afs/ncsa/packages/hdf/OSF1_V4.0"
- ;;
- *)
- h4paths="/usr/ncsa /usr/sdt"
- ;;
- esac
- echo $h4paths
- for h4 in $h4paths; do
- if [ -f $h4/lib/libdf.a -a -f $h4/include/hdf.h ]; then
- WITH_H4="--with-hdf4=$h4/include,$h4/lib"
- break
- fi
- done
- echo WITH_H4="$WITH_H4"
-}
-
-
-# Try locate the Fortran compiler
-# This is a hack because there is no consistent fortran compiler name
-LOCATE_FORTRAN()
-{
- OS=`uname -s`
- echo OS=$OS
- case "$OS" in
- IRIX64)
- case "$CC" in
- *-n32)
- gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-n32_nothreads_standard_debug
- sslpaths=/usr/local/ssl-n32
+ case `uname -m` in
+ i686)
+ szlibpaths="/afs/ncsa/projects/hdf/packages/szip_new/Linux2.4"
;;
*)
- gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-64_nothreads_standard_debug
- sslpaths=/usr/local/ssl
+ # Don't know. Give a shot at standard places.
+ szlibpaths="/usr/ncsa /usr/sdt"
;;
esac
;;
- *)
- ;;
- esac
- echo gasspaths=$gasspaths
- echo $sslpaths=$sslpaths
- for x in $gasspaths dummy; do
- if [ $x != dummy -a -f $x/lib/libglobus_gass_cache.a ]; then
- WITH_GASS="--with-gass=$x/include,$x/lib"
- break
- fi
- done
- for x in $sslpaths dummy; do
- if [ $x != dummy -a -f $x/lib/libssl.a ]; then
- WITH_SSL="--with-ssl=$x/lib"
- break
- fi
- done
-
- echo WITH_GASS="$WITH_GASS"
- echo WITH_SSL="$WITH_SSL"
-
-}
-
-
-# Try locate the GASS software library
-# This is a hack because there is no consistent place to find
-# the valid HDF library.
-LOCATE_GASS()
-{
- OS=`uname -s`
- echo OS=$OS
- case "$OS" in
- IRIX64)
- case "$CC" in
- *-n32)
- gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-n32_nothreads_standard_debug
- sslpaths=/usr/local/ssl-n32
- ;;
- *)
- gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-64_nothreads_standard_debug
- sslpaths=/usr/local/ssl
- ;;
- esac
+ SunOS)
+ szlibpaths="/afs/ncsa/projects/hdf/packages/szip_new/SunOS_5.8"
;;
*)
+ # Don't know. Give a shot at standard places.
+ szlibpaths="/usr/ncsa /usr/sdt"
;;
esac
- echo gasspaths=$gasspaths
- echo $sslpaths=$sslpaths
- for x in $gasspaths dummy; do
- if [ $x != dummy -a -f $x/lib/libglobus_gass_cache.a ]; then
- WITH_GASS="--with-gass=$x/include,$x/lib"
- break
- fi
- done
- for x in $sslpaths dummy; do
- if [ $x != dummy -a -f $x/lib/libssl.a ]; then
- WITH_SSL="--with-ssl=$x/lib"
+ echo szlibpaths=$szlibpaths
+ for x in $szlibpaths dummy; do
+ if [ $x != dummy -a -f $x/include/szlib.h -a -f $x/lib/libsz.a ]; then
+ WITH_SZLIB="--with-szlib=$x"
break
fi
done
- echo WITH_GASS="$WITH_GASS"
- echo WITH_SSL="$WITH_SSL"
-
+ echo WITH_SZLIB="$WITH_SZLIB"
}
@@ -242,6 +164,7 @@ trap QUIT 0
MAKE=${MAKE:-'gmake'}
export MAKE
CONFIGURE="CONFIG"
+CONFIG_OP= # configure options
CONFIG_ONLY=no # default is configure and build
NOEXEC= # default to execute commands
SRCDIRLIST=". ../hdf5" # places to look for configure
@@ -254,9 +177,6 @@ while [ $# -gt 0 ]; do
# do configure only
CONFIG_ONLY=yes
;;
- -gass)
- LOCATE_GASS
- ;;
-help)
USAGE
exit 0
@@ -268,6 +188,9 @@ while [ $# -gt 0 ]; do
shift
SRCDIRLIST="$1"
;;
+ -szlib)
+ LOCATE_SZLIB
+ ;;
*) # Quit parsing
break
;;
@@ -293,11 +216,14 @@ if [ x-$SRCDIR = x-dummy ]; then
exit 1
fi
+# Setup Configure options
+CONFIG_OP="$WITH_SZLIB"
+
# Configure
# no configure if already done.
if [ ! -f config.status ]; then
- CONFIGURE="$CONFIGURE $WITH_SSL $WITH_GASS"
- STEP "Configure HDF5..." "$CONFIGURE $*" "#config"
+ CONFIGURE="$CONFIGURE $CONFIG_OP $*"
+ STEP "Configure HDF5..." "$CONFIGURE" "#config"
else
STEP "Confiugre Skipped" "echo Confiugre Skipped" "#config"
fi